Manufacturing electronic technician jobs near me - 193 jobs

Shapes Technician/Production. Allied Mineral Products, Inc. is a leading manufacturer of monolithic refractories worldwide, headquarters in Columbus, Ohio. Due to our continued growth we are looking for technicians in our Shapes department to work: 1st shift Mon - Fri 6:00 am - 2:30 pm Pay range: $20.25 - $28.16 We are looking for energetic, motivated and results-driven individuals to join our Team. Duties and Responsibilities Receives, inspects and evaluates all raw materials. Assists in the development, revision, etc. of raw materials as needed. Responsible for completing daily assignments to meet customer demands for production. Stages materials for daily production demand and weighs all production batches including additives. Assists in the training of any new employees as needed. Reads and interprets water charts for production recipes. Assists in maintaining an orderly plant layout - cleans and organizes areas as necessary. Interacts with vendors when necessary. Cleans mixer and staging areas. Makes sure the area is ready for the next day's staging of materials. Assembles forms using hand tools and power tools. May use various glues, adhesives and other bonding agents; grease and other form release agents; screws, bolts and other fasteners. Materials used to construct the form may include wood, rubber, steel, plastics and/or Styrofoam. As required by production (based on QA checks or problems), repairs forms using hand tools, power tools, and necessary materials typically used in form construction. Reviews blueprints/sketches of shape specifications. Compares assembled forms and finished shape measurements to blueprints to evaluate quality. Uses lifting equipment to move shapes and forms as needed. Uses hand tools and power tools to finish shapes prior to drying. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. Minimum Qualifications: Strong work ethic Dependable and able to follow instructions Great attention to details Ability to read/use a tape measure Ability to evaluate 3D shape against written specifications Good math skills Ability to routinely lift 50+ lbs. Must be able to read, speak and write English Outstanding Attendance Production or Forklift experience a plus Must be at least 18 years old Allied offers: Competitive wages Health Insurance: medical, vision, dental, and STD, LTD. Company contribution to a Health Savings Account. Employee Stock Ownership Plan (ESOP), 401K, profit sharing, and other. Tobacco free environment Tuition reimbursement Onsite fitness facility Family/Company events Vacation, holidays, and personal time off paid. Allied Mineral Products offers competitive wages, health, dental, STD, LTD and ESOP retirement plan and profit sharing. The ability to pass a drug screen and physical (to wear a respirator) is required prior to starting work should an offer be made. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

+ Role will support the execution of manufacturing/quality systems such as continuous improvement, technology transfer / new product introductions, manufacturing process/procedures, risk assessments, process validation, training, and non-conformance. They will apply process, operational, scientific expertise, basic compliance knowledge, and analytical and troubleshooting skills to support operations. You may also serve as the primary production process owner for process support systems and assist with process ownership responsibilities on more complex process systems. **Responsibilities may include, but are not limited to:** + Bring continuous improvement initiatives for cost reduction or cycle time reduction and participate in the assessment or implementation of such special projects or initiatives. + Support process monitoring parameters and control limits based off KPIs and recommend improvements. Collect process-monitoring data and support the assessment of deviations. Provide support of timely execution of the process monitoring quarterly reports. + As a document owner, initiate, revise, and approve manufacturing procedures to ensure all procedures reflect current operations. Assess process performance by; observation of floor operations, review of performance data and provide troubleshooting support. Evaluate, plan, and implement solutions for process improvement opportunities. + Assist in generation of training materials and / or in providing training on scientific or technical aspects of the process. Execute risk evaluations for new processes or changes to existing processes and issue the summary reports of these evaluations. + Participate in technology transfer / NPI process to assess requirements for documentation, materials, training, and equipment modifications. Assess, prioritize, justify, and provide implementation and project management support for process or equipment modification projects. + Ensure that all Non-conformance are triage within the established goal. Assist with investigations, corrective actions and NC/CAPA closure within established goal. Monitor and communicate incidents trends. Review equipment/system Root Cause Analysis investigations and support trend evaluations. **Basic Qualifications:** + Doctorate degree + Masters degree and 2 years of experience + Bachelors degree and 4 years of experience + Associates degree and 8 years of experience + High school diploma / GED and 10 years of experience **Must Have Skill Sets:** + Quality & Compliance Knowledge (GMP, CAPA, documentation control, risk assessments) + Technical Expertise in Manufacturing Processes + Process Improvement & Continuous Improvement **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** . "US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran"

Job DescriptionGuild Associates, Inc. is a growing company with over 30 years' experience, specializing in innovative solutions for our customers. We are a leader in the alternative fuels marketplace, providing custom engineered and manufactured processing equipment in the compressed natural gas and liquid natural gas markets. We are looking for a dynamic, enterprising individual to add to our growing business. EXCELLENT BENEFIT PACKAGE MEDICAL INSURANCE ON THE FIRST DAY WORKED TIME OFF ELIGIBILITY ON THE FIRST DAY WORKED Assembly Technician are expected to carry out assembly of components and equipment following routine procedures and specifications. The Assembly Technician will be responsible for the assembly of mechanical, pneumatic, hydraulic, refrigeration, and electrical components to specification and to check products using standard measuring tools and equipment, etc. Capabilities: Demonstrate technical aptitude for assembling and testing processing equipment. Previous mechanical, electrical, HVAC, or construction experience is highly desired. Able to read and follow process instructions and drawings. Work requires continuous standing and ability to climb on, around, and under equipment being assembled. Moderate lifting (25-75 lbs.) is required. Demonstrate strict attention to detail. Must be able to supply own tools. Education/Experience: GED or High School Diploma required Degree/Certification Required: Technical School or US Military Technical Training Other technical work history will be considered Solid work history and great references. Guild Associates is an equal opportunity employer and will consider all candidates for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law. Powered by JazzHR 9oVYX1HWS3

Location: Groveport, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Manufacturing Technician for our client. This position is responsibilities include using precision measuring instruments, performing equipment testing, interpreting mechanical drawings, conducting quality inspections, preparing products for shipment, and maintaining a clean and organized work area.What's a Typical Day Like? Work with a team to assemble, troubleshoot, and repair company equipment Use precision measuring instruments and gauges Perform equipment testing Interpret mechanical drawings Conduct quality inspections on products and parts Prepare finished products for shipment Maintain a clean and orderly work area What Are the Requirements of the Job? Experienced in manufacturing, assembly, or other related fields for 2-4 years Experienced with 5T-15T overhead cranes Familiar with assembly tools and metal shop equipment Experience with basic hand tools Mathematically and mechanically inclined. Able to handle physical workload Able to pass a drug test and background check Able to work with minimum supervision in a multi-task in a fast-paced environment Ability to work in fast-paced environment. Ability to move or lift up to 50+ lbs. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Ability to utilize hand/eye coordination. Capability to stand for prolonged periods of time Communication skills. How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

On a production basis, performs electrical and mechanical assembly work to complete the hoist and box/panel wiring in the Hoist Assembly Area. Must be able to work from schematics, blue prints and other input documents of similar complexity. Must be able to use hand tools and test equipment to complete the product. May also perform some trouble-shooting and rework of production items. Job Requirements: Ability to read and interpret schematics (preferred), blueprints and work orders. Mechanical experience a plus. A strong background and knowledge of assembly operation desired. Strong work ethic a must. Electrical assembly experiences a plus. Good communication and organizational skills required. Ability to work occasional overtime is required. Electrical trouble shooting skills a plus. Knowledge of 3 Phase & Single-Phase a plus. Ability to lift up to 50 pounds Work Environment: Work is a mix of standing, bending, squatting, lifting and sitting. There is frequent reaching, bending, pulling and lifting in relationship to components to be gathered and assembled. This individual must be able to occasionally lift up to 70 pounds and frequently lift 25 pounds several times a day This position requires manual dexterity and visual acuity to utilize the assembly equipment and tools. The noise level is usually moderate; temperatures in the assembly area may fluctuate with the seasons as the production area is not air conditioned. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work statements above are intended to describe the general nature and level of work being performed by the individual classified as the Electrical Wire Assembler-Complex. They are not considered an exhaustive list of all job duties. Perform other tasks as needed

Amentum is seeking an Electronics Technician B for a position on Kauai, HI to independently or under minimum supervision and assignment from Lead Technician, provide contracted operational and maintenance support services to the Pacific Missile Range Facility (PMRF) customer. Electronics Technician responsibilities encompass, operating, maintaining, troubleshooting, repairing, calibrating, modifying, testing and installing telecommunications systems and associated networking components and cabling. Technician should be experienced in telecommunications technologies for voice, video and data systems or their industry equivalents that are assigned to PMRF communications facilities and assets. Responsibilities Specific assignments and responsibilities include but are not limited to the following areas: Sets-up, checks-out, operates, monitors, and maintains systems and equipment for Range Operations support. Responds to evolving operational environments requirements when directed. Perform periodic inspections and maintenance tasks in accordance with published procedures and/or OEM guidelines. Documents results of all maintenance actions in systems and equipment records. Perform troubleshooting and repair of systems/equipment by reading and interpreting electronic/mechanical schematics and using simple and complex tools and test equipment. Install, check-out, and or bench test, calibrate and perform acceptance tests on new and relocated systems and equipment, as directed. Perform Communications Security (COMSEC) functions including accounting, loading, and destruction and courier services for classified cryptographic materials and items. Maintain Telecommunications Inside Cable Plant and Major Battery Back-up Systems. Occasional travel for operations and maintenance support at other locations throughout the State of Hawaii to include at sea for extended periods. Performs other duties as required. Working Environment/ Physical Activities Environment Electronics Shop and Radio Frequency field environments Operations Command & Control Center Travel to and work at remote site locations to include at sea for extended periods. Physical Activities Must be able to lift, carry, install and remove electronics equipment and peripherals up to 50 lbs. Must be able to climb elevated towers and work in sub-floor areas and crawl spaces in performing maintenance inspections and troubleshooting tasks. Positions: Walking/Standing; Crawling & Kneeling; Repeated Stooping; Sitting; Climbing Pushing/ Pulling: Over 50lbs Environmental: Customer Contact; Extended Work Day; Confined Work Area; Office Laboratory; Field Assignment; Inclement Weather Minimum Qualifications Education High School or equivalent AS Degree in related field or equivalent training, e.g. 2 Year Technical School or Navy "A" school with either school specializing in Basic Electricity and Electronics Systems. Soldering certificate or equivalent training inclusive within curriculum of a technical school such as a Navy A school or from a commercial firm. Experience Five years of progressive experience in a related field with a minimum of two year's experience operating and maintaining telecommunications for voice, video and data along with related networking systems and equipment. Radio Frequency (RF) to include but not limited to Transmission & Antenna systems for Ground Radio, Microwave, Satellite, and other associated telecommunication technologies. Telecommunications Inside Cable Plant, Main and Intermediate Distribution Frame and Cable Record keeping. Major Battery Back-up and power distribution system experience desired. Must be able to use and interpret the results of test equipment used in telecommunications, video and networking fields such as O-scopes, RF Power meters, Analyzers, Voltage multi-meters, Bit Error Rate Testers (BERT), Time Domain Reflectometers, Toners/Tracers Basic Electricity & Electronics theory and applications with emphasis in telecommunications and network troubleshooting and repair. Proficiency in reading and interpreting schematic diagrams for troubleshooting and repair. Must have a soldering certificate or equivalent training from a commercial firm, technical school or Navy school. Must be familiar with OSI 7 Layer model. Windows based OS and LINUX platforms Must possess the following PC skills: Word; Excel; Outlook, Power Point; Windows Security Clearance Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain and maintain a Secret Clearance. Applicants selected either must currently possess a Secret clearance or will be subject to a US Government Security Investigation and must meet eligibility requirements to obtain clearance prior to commencement of employment and maintain a security clearance for access to classified information or Closed/Restricted Areas throughout duration of employment. Compensation The hourly rate for the position is $47.84 per hour. (Hourly rate set by CBA/SCA). Benefits Amentum offers the following benefits for this position, subject to applicable eligibility requirements: medical, dental and vision insurance, 401(k) retirement plan, life insurance, long term and short term disability insurance, 10 days of paid time off, 10 days paid sick and safe time. This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: Please visit our career site: *********************** Compensation Details: 47.84 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax-saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 01/06/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

M.H. Eby, Inc.- a leading manufacturer of aluminum trailers and truck bodies is looking for experienced laborers to work in our fast-growing company. Candidates must be trainable and willing to learn! TIG Welders Fabricators Assemblers First and Second shift positions available! At M.H. EBY, Inc., we foster a culture that rewards initiative, hard work, and teamwork. Join our dynamic team and grow your career with us. Benefits: * Paid Time Off after 90 days * Paid Holidays * 401K & Profit-Sharing Plan * Medical and Dental insurance * FSA * Life Insurance * Short Term Disability Insurance General tasks may include welding and/or fabricating aluminum, operating CNC machinery, operating forklifts and overhead cranes, operating various hand tools, and much more. On-the-job experience is not required, but good attitude, good work ethic, and a team mentality is a must. MH Eby, Inc is a third-generation family-owned company established in 1938. Headquartered in Lancaster County, Pennsylvania with 7 additional locations spanning from Ohio to Montana, Eby designs and builds aluminum transportation equipment including Livestock, Grain and Equipment trailers, and a full line of truck bodies. All locations offer comprehensive service and parts to support our customers. All applicants will be considered. Potential hires must pass a physical and drug screen before starting employment. Experience is preferred but we will train the right candidate. Starting wage based upon experience.

Sweve Tech Limited is seeking a motivated Electronics Technician who can work effectively in a remote capacity, while also traveling to company location, client sites, and vendor facilities as needed. This role is critical in providing installation assistance, troubleshooting, maintenance support, and calibration services. The ideal candidate will be hands-on, eager to learn, and committed to delivering high-quality technical services. Key Responsibilities: 1. Installation Assistance: - Support the installation of electronic systems and equipment at, office, clients and vendors locations. - Assist senior engineers during setup and commissioning of Sweve Tech systems. 2. Troubleshooting and Maintenance Support: - Diagnose and resolve issues with electronic equipment both remotely and onsite. - Provide timely maintenance support to minimize downtime and optimize equipment performance. - Respond to customer inquiries for technical assistance, offering clear and accurate solutions. 3. Calibration Services: - Perform calibration of electronic systems and devices to ensure accuracy and reliability. - Maintain records of all calibration activities, ensuring compliance with industry standards. 4. Documentation: - Create and update service reports, technical manuals, and maintenance logs. - Document all troubleshooting steps and solutions for future reference. - Maintain accurate records of all service and installation activities. 5. Travel and Remote Work: - Work remotely with occasional travel to client sites, vendor facilities, and company locations as needed. - Coordinate with the technical team to schedule service visits and ensure timely completion of tasks. Qualifications: - Education: - High school diploma or equivalent required. - An associate degree or technical certification in electronics, instrumentation, or a related field is a plus. - Experience: - Previous experience in electronics, such as internships, vocational training, or hands-on work, is preferred but not required. - On-the-job training will be provided to candidates willing to learn and grow in the field. - Technical Skills: - Basic understanding of electronic systems, circuitry, and troubleshooting techniques. - Familiarity with calibration procedures and maintenance practices is a plus. - Soft Skills: - Strong communication skills, with the ability to explain technical concepts clearly. - Detail-oriented with excellent organizational skills. - Ability to work independently and manage time effectively in a remote setting. - Other Requirements: - Flexibility to travel as needed, including potential overnight stays. - Valid drivers license and reliable transportation for site visits. What We Offer: - Competitive salary with opportunities for career advancement. - Comprehensive training and development programs. - Flexible remote work arrangements with travel allowances. - A supportive team culture focused on innovation and customer satisfaction. Join Sweve Tech Limited as an Electronics Technician and be part of a forward-thinking company that values skill development and teamwork. This role is perfect for those looking to build a career in electronics while enjoying the flexibility of remote and on-site work. Apply today to take the next step in your technical career! Job Type: Full-time Pay: $33.00 - $39.00 per hour Schedule: Monday to Friday About Us Sweve Tech Limited is a leading engineering and consulting company specializing in electrical, electronics, Civil, Mechanical Engineering, Project Management, renewable Energy solutions and Urban Planning. We deliver top-tier solutions for installations, troubleshooting, and maintenance across multiple regions. We prioritize innovation, quality, and efficiency, fostering a collaborative environment where our team can thrive. Benefits of Working as an Electronics Technician - Competitive salary - Flexible remote work options - Comprehensive training and career development - Health insurance and wellness programs - Paid time off and holidays - Retirement savings with company match - Travel opportunities (domestic and international) - Career growth with promotion from within - Supportive and collaborative work culture Join Sweve Tech Limited to advance your career while enjoying industry-leading benefits and growth opportunities.

Highway Patrol Electronic Technician 1 (250007FL) Organization: Public SafetyAgency Contact Name and Information: Kate Veeley | ********************* Unposting Date: OngoingWork Location: HP Alum Creek Facility 1583 Alum Creek Drive Columbus 43209Primary Location: United States of America-OHIO-Franklin County-Columbus Compensation: $26.25 - $31.95 per hour Schedule: Full-time Work Hours: See Work Hours BelowClassified Indicator: ClassifiedUnion: OSTA Primary Job Skill: Telecommunication SystemsTechnical Skills: Basic Documentation, Communications, Telecommunication Systems, Electrical Engineering, Electrical TradeProfessional Skills: Analyzation, Attention to Detail, Listening, Problem Solving, Written Communication Agency Overview Ohio State Highway PatrolIs an internationally accredited agency whose mission is to protect life and property, promote traffic safety and provide professional public safety services with respect, compassion, and unbiased professionalism. Job Description Ohio Department of Public Safety - Ohio State Highway PatrolReport In Location - 1583 Alum Creek Drive, Columbus 43209Work Hours: Choice of 6:00am - 2:00pm OR 7:00am - 3:00pm THIS POSTING IS FOR APPLICANTS TO APPLY TO BE PLACED IN A POOL OF CANDIDATES TO BE CONSIDERED FOR CURRENT AND FUTURE POSSIBLE OPENINGS AT THE LOCATION NOTED. Perks of Working for the Ohio Department of Public SafetyMultiple pay increases over the first years of service!Free Parking!Under the direction & guidance of higher-level Highway Patrol Electronic Technician, clean, install, repair, & maintain basic electronic & communication equipment:Install all RF mobile & portable electronic equipment, various electronic equipment, various wiring harnesses, various storage boxes, trays, consoles &/or cages into Ohio Department of Public Safety (ODPS) staff vehicles, Ohio State Highway Patrol (OSHP) vehicles, &/or vehicles for other state agencies, which may contain secured ammunition &/or firearms.Perform final inspection of all items listed above & on all electronic equipment installed in vehicles for accuracy & completeness.Test, repair, &/or refurbish electronic equipment & various wiring harnesses; Repair electronic testing equipment used for monitoring & adjusting.Monitor & correct any frequency modulations & power output according to Federal Communications Commission (FCC) rules & regulations.Log repairs performed & adjustments to equipment per FCC guidelines.Click here to see full position description Why Work for the State of OhioAt the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees*. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: Medical Coverage Free Dental, Vision and Basic Life Insurance premiums after completion of eligibility period Paid time off, including vacation, personal, sick leave and 11 paid holidays per year Childbirth, Adoption, and Foster Care leave Education and Development Opportunities (Employee Development Funds, Public Service Loan Forgiveness, and more) Public Retirement Systems (such as OPERS, STRS, SERS, and HPRS) & Optional Deferred Compensation (Ohio Deferred Compensation) *Benefits eligibility is dependent on a number of factors. The Agency Contact listed above will be able to provide specific benefits information for this position.QualificationsOption 118 mos. exp. in installation, repair & workings of mobile communication equipment or vehicular electronics; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. Option 2-Or completion of 2 yr. technical program in electronics or radio communications; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. Option 3-Or completion of associate core program in electronic engineering; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. -Or equivalent of Minimum Class Qualifications for Employment noted above. Note: To meet the minimum qualifications through completion of a 2 yr. technical program, applicants must be able to verify that the technical program consisted of a minimum of 21 credit hours upon completion. Helpful Tips for Applying:1. Be detailed when describing your current/previous work duties. The more the better!! Don't just write "see attached resume".2. Tailor your application for each position you apply for. You should clearly describe how you meet the minimum qualifications outlined in this job posting.3. Respond to all questions asked. If you do not have the education/training/experience that is being asked, select either "No" or "N/A". Job Skills: Telecommunication Systems Supplemental InformationUNUSUAL WORKING CONDITIONS: Exposed to high voltages, inclement weather, dust, dirt, fumes, loud & constant noise; exposed to mosquitoes, rodents, wasps & poisonous snakes at remote tower sites; installations & repairs require working in confined spaces such as under vehicle dashboards & in vehicle trunks; on call 24 hrs; 7 days per week.This position is essential, meaning the duties this job performs are critical to the continued operations of the Ohio Department of Public Safety during a public safety emergency (OAC 123: 1-46-01 & DAS Directive HR-D-11). This position will be required to report for duty during any public safety emergency. Background Check Information A BCI and FBI fingerprint check, a background check, including a polygraph examination, may be required on all selected applicants.A comparative analysis and/or drug-test may be a requirement of the hiring process.This position is subject to Federal Alcohol Tobacco and Firearms (ATF) regulations that prohibit someone to carry, transport, or otherwise possess firearm(s) and/or ammunition from consuming marijuana, including medical marijuana. Medical marijuana is prohibited as a valid medical explanation for a positive drug test for final applicants in this position.To request a disability accommodation, please email ************************* as soon as possible, or at least 48 hours prior to the above referenced testing or interview date so any necessary arrangements may be made in a timely manner. ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug-free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting.

The Electronics Technician performs basic diagnosis repairs and modifications to electronics systems. Performs the required periodic maintenance, troubleshooting, repairs, installations, and testing of equipment as required. Assist other Technicians in the setup, maintenance, and storage of airfield systems and deep-field camp systems that support aviation operations and weather observing. This position deploys to McMurdo Station, Antarctica to conduct work locally. The United States Antarctica Program requires all personnel deploying to Antarctica to pass a physical qualification. **Bonus Opportunity** CNI is committed to recognizing and rewarding our employees' hard work. As an incentive, team members who complete the deployment phase of their assignments and are in good standing may be eligible (*or qualify) for a performance-based bonus. This bonus reflects our appreciation for our employees' dedication, expertise, and contribution to successfully completing the deployment. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS Must be able to obtain a T1 Clearance through the government customer. Must pass internal background checks. A valid passport is required and is reimbursable. Must have a valid driver's license. Must be able to perform job duties in extreme, cold, dark, work environments. Must pass medical and dental examination prior to deployment; expenses are reimbursable. Knowledge and experience performing electronics repair, maintenance, and checkout. Ability to follow directions and work independently or with a team. Ability to be reliable in attendance/punctuality. Ability to practice and promote required safety standards. Working knowledge of Microsoft Office Suite. Ability to persuade others to accept recommendations and to negotiate to find mutually acceptable solutions. Ability to organize work, set priorities, and determine resource requirements. Organization, problem-solving, resolution and critical thinking skills. Customer service and relationship-building skills. Excellent verbal and written communications skills. KEY DUTIES AND RESPONSIBILITIES Essential Duties and responsibilities include the following. Other duties may be assigned. Monitors and reports on system readiness, capabilities, limitations, and reliability. Document and archive maintenance actions. Ensures work center safety and equipment verification; maintain tool inventory and CPR certification. Submits repair requests, maintain equipment logs and certifications, and manage spare parts inventory. Calibrates and repairs sensors, test equipment, and support NAVAIDS, communications, and meteorology systems. Adheres to configuration, security, and frequency management policies and procedures. Provides 24/7 maintenance support, prepare reports on incidents, system outages, and operational availability. Setup, maintain, and repair of all NAVAIDS and communications systems; ensure proper equipment installation and compliance with frequency management. Setup, maintain, and repair of all meteorology systems, and perform maintenance at remote locations. Attends safety training, maintains a safe work area, and engages in self-development through available training. EDUCATION AND EXPERIENCE Laborer: High School Diploma or GED. Performs tasks that require mainly physical abilities and effort involving little or no specialized skill. The following tasks are typical of this occupation: Loads and unloads trucks, and other conveyances; moves supplies and materials to proper location by wheelbarrows or hand trucks; stacks materials for storage or binning; collects refuse and salvable materials. Digs, fills, and tamps earth excavations; levels ground using pick, shovel, tamper and rake; shovels concrete and snow; cleans culverts and ditches; cuts trees and brush. Must be able to move and arrange heavy pieces of electronic equipment, office furniture, and appliances; pull outdoor cable; climb structures; use heavy-duty tools; and if properly trained, operate light machinery and equipment. Electronics Technician Maintenance I: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or two (2) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Two (2) years of practical experience, to include: electronics repair, maintenance and checkout. Must demonstrate at least one (1) year of practical experience in electronics installation. Experience may be achieved simultaneously. Electronics Technician Maintenance II: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or four (4) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Four (4) years of practical experience, to include: electronics repair, maintenance and checkout. Must demonstrate at least one (1) year of practical experience in electronics installation. Experience may be achieved simultaneously. Electronics Technician III Maintenance: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or four (4) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Eight (8) years of practical experience, to include: Electronics Repair, Maintenance, Installation and Checkout. Two (2) years of experience, to include: supervision, and shop practices. Three (3) years of practical experience, to include: electronics repair and installation. Experience may be achieved simultaneously. PHYSICAL DEMANDS The physical ability to stand and or walk frequently. May climb on a ladder or scaffolding to heights in excess of 10'. Bend/stoop, push/pull and work above the shoulder frequently. Occasionally balance, kneel, crouch, and squat. May occasionally lift and/or move up to 65lbs. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet The estimated pay range for this role is $24 to $36 per hour, with the final offer contingent on location, skillset, and experience. CNI offers a comprehensive benefits package that includes: Medical Dental Vision 401(k) Family Planning/Fertility Assistance STD/LTD/Basic Life/AD&D Legal-Aid Program Employee Assistance Program (EAP) Paid Time Off (PTO) - (11) Federal Holidays Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). #INDCNI

Responsibilities and Qualifications RESPONSIBILITIES 2+ years of practical experience required, focused in Electronics Repair, Maintenance, Installation and Checkout. Other experience required in supervision, and shop practices, electronics repair and installation, and Information Technology installation projects. Ability to be qualified and trained to work on the Lenel “On Guard” ESS system, CCTV's and Morse Watchman Keypro systems. Contractor personnel performing work on the Lenel “On Guard” ESS shall be certified by Lenel as a Lenel Certified Professional (LCP) in Access Control and Video Trained by staff in how to use software and hardware. (Lenel, AMAG, Honeywell, IQ MultiAccess, Bosch, LG, DAQ Electronics, DEA System SPA, Hirsch Electronics, Valerus, Pelco, IDIS, Panasonic, Axis Communication, GFMS, KeyTrak Guardian, Morse Watchman, Stanley Security Solutions Keystone, and Matrix Key Control) REQUIRED QUALIFICATIONS Experience: Two years of overall professional experience in the Information Technology field. Two years of overall experience in Microsoft Windows client and server operating systems. Two years of experience with electronic security systems, specifically hands-on experience in installing, configuring, maintaining, and resolving issues with the DLA ESS or EKC system. Certifications: Lenel Certified Professional (LCP) - Ability to Obtain after Start Milestone Certification - Obtained by Start Education: HIgh School Diploma or GED Clearance: Must possess a Secret security clearance PREFERRED QUALIFICATIONS Certifications: DoD Approved 8570 Baseline Certification: Category IAT Level II Overview We are seeking a Electronics Technician to join our team supporting DLA Integrated Electronic Security Systems (IESS) and Electronic Key Control (EKC). TekSynap is a fast-growing high-tech company that understands both the pace of technology today and the need to have a comprehensive well planned information management environment. “Technology moving at the speed of thought” embodies these principles - the need to nimbly utilize the best that information technology offers to meet the business needs of our Federal Government customers. We offer our full-time employees a competitive benefits package to include health, dental, vision, 401K, life insurance, short-term and long-term disability plans, vacation time and holidays. Visit us at ***************** Apply now to explore jobs with us! The safety and health of our employees is of the utmost importance. Employees are required to comply with any vaccination requirements mandated by contract, applicable law or regulation. By applying to a role at TekSynap you are providing consent to receive text messages regarding your interview and employment status. If at any time you would like to opt out of text messaging, respond "STOP". As part of the application process, you agree that TekSynap Corporation may retain and use your name, e-mail, and contact information for purposes related to employment consideration. Additional Job Information WORK ENVIRONMENT AND PHYSICAL DEMANDS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Location: Columbus, OH Type of environment: On Site Noise level: Medium Work schedule: Schedule is day shift Monday - Friday. May be requested to work evenings and weekends to meet program and contract needs. Amount of Travel: Less than 10% PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle, feel, touch; reach with hands and arms; talk and hear. The employee is regularly required to stand; walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee is regularly required to lift up to 10 pounds. The employee is frequently required to lift up to 25 pounds; and up to 50 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK AUTHORIZATION/SECURITY CLEARANCE U.S. Citizen Secret security clearance or have a current National Agency Check with Local Agency Check and Credit Check (NACLC). OTHER INFORMATION Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. TekSynap is a drug-free workplace. We reserve the right to conduct drug testing in accordance with federal, state, and local laws. All employees and candidates may be subject to drug screening if deemed necessary to ensure a safe and compliant working environment. EQUAL EMPLOYMENT OPPORTUNITY In order to provide equal employment and advancement opportunities to all individuals, employment decisions will be based on merit, qualifications, and abilities. TekSynap does not discriminate against any person because of race, color, creed, religion, sex, sexual orientation, gender identity, protected veteran status, national origin, disability, age, genetic information, or any other characteristic protected by law (referred to as “protected status”). This nondiscrimination policy extends to all terms, conditions, and privileges of employment as well as the use of all company facilities, participation in all company-sponsored activities, and all employment actions such as promotions, compensation, benefits, and termination of employment. TekSynap is committed to ensuring that our online application process provides an equal employment opportunity to all job seekers, including individuals with disabilities. If you believe you need a reasonable accommodation in order to search for a job opening or to submit an application, please contact *************** for assistance.

Responsibilities & Qualifications RESPONSIBILITIES 2+ years of practical experience required, focused in Electronics Repair, Maintenance, Installation and Checkout. Other experience required in supervision, and shop practices, electronics repair and installation, and Information Technology installation projects. Ability to be qualified and trained to work on the Lenel “On Guard” ESS system, CCTV's and Morse Watchman Keypro systems. Contractor personnel performing work on the Lenel “On Guard” ESS shall be certified by Lenel as a Lenel Certified Professional (LCP) in Access Control and Video Trained by staff in how to use software and hardware. (Lenel, AMAG, Honeywell, IQ MultiAccess, Bosch, LG, DAQ Electronics, DEA System SPA, Hirsch Electronics, Valerus, Pelco, IDIS, Panasonic, Axis Communication, GFMS, KeyTrak Guardian, Morse Watchman, Stanley Security Solutions Keystone, and Matrix Key Control) REQUIRED QUALIFICATIONS Experience: Two years of overall professional experience in the Information Technology field. Two years of overall experience in Microsoft Windows client and server operating systems. Two years of experience with electronic security systems, specifically hands-on experience in installing, configuring, maintaining, and resolving issues with the DLA ESS or EKC system. Certifications: Lenel Certified Professional (LCP) - Ability to Obtain after Start Milestone Certification - Obtained by Start Education: HIgh School Diploma or GED Clearance: Must possess a Secret security clearance PREFERRED QUALIFICATIONS Certifications: DoD Approved 8570 Baseline Certification: Category IAT Level II Overview We are seeking a Electronics Technician to join our team supporting DLA Integrated Electronic Security Systems (IESS) and Electronic Key Control (EKC). TekSynap is a fast-growing high-tech company that understands both the pace of technology today and the need to have a comprehensive well planned information management environment. “Technology moving at the speed of thought” embodies these principles - the need to nimbly utilize the best that information technology offers to meet the business needs of our Federal Government customers. We offer our full-time employees a competitive benefits package to include health, dental, vision, 401K, life insurance, short-term and long-term disability plans, vacation time and holidays. Visit us at ***************** Apply now to explore jobs with us! The safety and health of our employees is of the utmost importance. Employees are required to comply with any vaccination requirements mandated by contract, applicable law or regulation. By applying to a role at TekSynap you are providing consent to receive text messages regarding your interview and employment status. If at any time you would like to opt out of text messaging, respond "STOP". As part of the application process, you agree that TekSynap Corporation may retain and use your name, e-mail, and contact information for purposes related to employment consideration. Additional Job Information WORK ENVIRONMENT AND PHYSICAL DEMANDS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Location: Columbus, OH Type of environment: On Site Noise level: Medium Work schedule: Schedule is day shift Monday - Friday. May be requested to work evenings and weekends to meet program and contract needs. Amount of Travel: Less than 10% PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle, feel, touch; reach with hands and arms; talk and hear. The employee is regularly required to stand; walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee is regularly required to lift up to 10 pounds. The employee is frequently required to lift up to 25 pounds; and up to 50 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK AUTHORIZATION/SECURITY CLEARANCE U.S. Citizen Secret security clearance or have a current National Agency Check with Local Agency Check and Credit Check (NACLC). OTHER INFORMATION Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. TekSynap is a drug-free workplace. We reserve the right to conduct drug testing in accordance with federal, state, and local laws. All employees and candidates may be subject to drug screening if deemed necessary to ensure a safe and compliant working environment. EQUAL EMPLOYMENT OPPORTUNITY In order to provide equal employment and advancement opportunities to all individuals, employment decisions will be based on merit, qualifications, and abilities. TekSynap does not discriminate against any person because of race, color, creed, religion, sex, sexual orientation, gender identity, protected veteran status, national origin, disability, age, genetic information, or any other characteristic protected by law (referred to as “protected status”). This nondiscrimination policy extends to all terms, conditions, and privileges of employment as well as the use of all company facilities, participation in all company-sponsored activities, and all employment actions such as promotions, compensation, benefits, and termination of employment. TekSynap is committed to ensuring that our online application process provides an equal employment opportunity to all job seekers, including individuals with disabilities. If you believe you need a reasonable accommodation in order to search for a job opening or to submit an application, please contact *************** for assistance.

The ROSEN Group is a globally leading provider of cutting-edge solutions in all areas of the integrity process chain. Since its origins as a one-man business in 1981, ROSEN has rapidly grown and continues to do so. The international technology group consists of a team of more than 4,000 employees operating in more than 120 countries. ROSEN offers sophisticated and highly innovative products and services to the oil and gas and other engineering industries. ROSEN is an extended team of people with a passion for technology and innovation. Our ongoing organic growth results in career opportunities and gives our employees chances for further development and added experience. For more information about ROSEN go to ******************** ROSEN USA, based in Columbus, OH seeks to employ an Electronics Technician to test, repair, sensor test and perform basic wiring of ROSEN USA's in-line inspection tools. Responsibilities: The Electronics Technician will be responsible for the following: * Repair and test electronic components and wiring of in-line inspection tools in accordance with documented work procedures, technical instructions, drawings and parts lists. * Verification of the external sensor components of the in-line inspection tool. * Ability to identify parts and sensors that may need to be purchased or manufactured for the tool. * Work in close cooperation with Field Service Technicians regarding electronic and sensorial affairs. * Work in close cooperation with Mechanic Assembly Technician for final tool testing and assembly. REQUIREMENTS Local Columbus area applicants only, relocation and/or sponsorship not available. No agency solicitations or referrals please. Physical Demands: * Must be able to lift up to 80 lbs. with the assistance of another person from a start height of 48 inches to an end height of 9 inches from the floor up to 1 time per hour. * Must be able to lift up to 29 lbs. from a start height of 9 inches to end height of 36 inches from the floor up to 1 time per hour. * Must be able to push-pull up to 35 lbs. a distance of 75 feet up to 1 time per hour. * Must be able to push-pull with a force up to 10 lbs. a distance of 300 feet up to 1 time per hour. * Must be able to push-pull with a force up to 39 lbs. a distance of 10 feet up to 1 time per hour. * Must be able to push-pull with a force up to 17 lbs. a distance of 75 feet up to 1 time per hour. * Must be able to push-pull up to 30 lbs. up to 2 times per hour. * Must be able to grasp/squeeze tools with forces up to 45 lbs. up to 20 times per hour. * Must be able to ascend/descend a flight of 18 stairs with a height of 10 inches from the floor up to 1 time per hour. * Must be able to ascend/descend a three stair step stool with a height of 10 inches from the floor up to 1 time per hour. * Must be able to stand up to 1 hour continuously for a total of up to 8 hours. * Must be able to walk a distance up to 300 feet. Qualification or Skills: * 2+ years of relevant electronic assembly experience. * Associates or Technical degree with emphasis in electronics. * Wiring, soldering and assembly experience in a manufacturing environment a plus. * Ability to use a variety of hand and power tools. * Must be able to lift 50 lbs. or more. * Must have experience interpreting and working from schematic diagrams, specification sheets and manuals. * Must comply with established Health and Safety regulations. * Excellent written and verbal communication skills and capability to communicate with all levels of the organization. * Good time management and organization skills. * A self-motivated, pro-active individual who is able to work independently as well as in a team environment. * Basic skills with Microsoft Office products such as Word and Excel. * Successfully complete a drug screen test, background check and physical performance evaluation including a vision exam as applicable to the position OUR OFFER In addition to competitive pay, you are also eligible for most of the following benefits from Day One: * Medical - 2 PPO plans & 1 High Deductible (HDHP) with a Health Savings Account (HSA) * Dental - Covered at 100% for employee & dependents * Vision - Covered at 100% for employee & dependents * 401K with a 5% matching employer contribution * Company paid basic Life Insurance, Short Term Disability / Long Term Disability * Flexible Spending Accounts * Generous Vacation Plan & Paid Time Off (PTO) * Employee Assistance Program * Access to employee resource groups * Maternity & Parental Leave * Fertility, adoption and surrogacy benefits * 32 hours paid Volunteer Time Off * Hybrid working environment for certain positions * Annual merit & career advancement increases * Leadership growth & professional development opportunities * Tuition Reimbursement

SummaryThe Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies.Job Description Roles and Responsibilities Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. Develop strong working relationships with casting supplier technical teams. Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. Act as a change agent to advance world-class performance and standard work across the supply base. Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. Review and approve significant/special processes; ensure adherence to standards and qualification requirements. Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. Ability to travel to supplier sites 30%-50% Minimum Required Qualifications Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field Desired Characteristics and Experience Additive manufacturing experience. Metal Injection Molding (MIM) experience. Proficiency with Siemens NX or comparable CAD. Sand Castings Experience. Titanium Experience. Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. Strong problem solving and project management skills. New Product Introduction experience. Experience maturing technologies and processes. Excellent communication and stakeholder management; ability to influence without authority Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( Safety, Quality, Delivery and Cost in that order) . Pay and Benefits: The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No #LI-Remote - This is a remote position

At Kelly Services, we work with the best. Our clients include 99 of the Fortune 100 TM companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. Job Description Kelly Services has been providing outstanding employment opportunities to the most talented individuals in the marketplace. We are proud to offer a temporary opportunity to work as a Manufacturing Technician for one of our top Life Science clients located in West Chester, OH. By working with Kelly in this role, you would be eligible for: - A competitive hourly pay rate with weekly payment via direct deposit - Online continuing education via the Kelly Learning Center - Several employee discounts - And more! *This is a 6+ month temporary position at 40 hours per week* Qualifications . Experience working with machines and performing repairs 2. High school diploma or equivalent Additional Information All your information is kept confidential as per EEO standards. Why is this a great opportunity? The answer is simple…working at our client is more than a job; it's a career. The opportunities are diverse whether you are right at the start of your career or whether you are looking for new challenges this is the job for you, so be quick and apply now!

No Experience Necessary - Training Provided PRIMARY RESPONSIBILITIES Assess various commercial, industrial, and home user electronics. This can include commercial networking appliances and server equipment, industrial computers and purpose built technology in addition to mass produced retail grade products. Technicians will be responsible for disassembly of electronics and sorting harvested components. Familiarity with home computers and experience building/repairing PC's not required but a big plus. Follow All Safety Procedures Ability to stand on your feet for long periods of time while working Safely use hand tools and basic power tools (hand drill, impact driver) Break down electronic and computer equipment to remove technological components Sort raw materials Palletize finished product for shipping Stage finished product for loading Move raw materials to warehouse storage Responsible for quality control of company product Operate within standard operating procedures (SOPs) Maintain housekeeping of warehouse and surrounding area Turn off and lock out equipment when not in use Check in equipment received in warehouse according to company procedure Adhere to all company policies and procedures Other general warehouse duties as assigned KNOWLEDGE AND SKILL REQUIREMENTS Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent. Manual dexterity required for operating machinery. Ability to lift up to 75 pounds required. Clean Background check. Willingness for background check and drug screening. WORKING CONDITIONS Working conditions are normal for a manufacturing environment. Work involves frequent lifting of materials and product up to 75 pounds. Machinery operation requires the use of safety equipment to include but not limited to; eye safety glasses, hearing protectors, work boots, and hardhats. No Phone Calls Walk in Applications Accepted Job Code: 99 Closing On: Closing On: Tuesday, 14th February 2023 Department: Warehouse Shift: Monday-Friday 9 a.m.-5 p.m. Location: Columbus, Ohio West Columbus 3854 Fisher Rd Job Type: Full Time Education: High School Pay Rate: $13-$16 hr

Job Description Majestic Plastics is a Custom Plastic Injection Molder and have strived for the upmost quality of our product for the last 25 years. We are 100% Employee-Owned! Ready to dive into the thrilling world of manufacturing? Join our team at Majestic Plastics in Bellefontaine, Ohio, where you'll become an essential part of our Injection Molding operations! As a Manufacturing Technician, you'll work hands-on with advanced machines and presses, helping to shape plastic components for the automotive industry. This exciting onsite role offers a competitive pay range of $19.00 - $22.00 per hour. Picture yourself problem-solving daily, pushing the boundaries of innovation, and collaborating with energetic molders in a factory environment that values safety and excellence. You will have benefits such as Snack/Drink Room, Medical, Dental, Vision, Company paid Life Insurance, Paid Time Off, 401k Plan with Company Match, Monthly Perfect Attendance Bonus, ESOP - Employee Stock Ownership Plan, Holiday Pay, and Company paid Disability. This position invites you to explore the art of automation while mastering the maintenance of our cutting-edge equipment. Don't miss your chance to be part of something majestic-apply today! Are you excited about this Manufacturing Technician job? As a Manufacturing Technician at Majestic Plastics in Bellefontaine, Ohio, your role will involve crucial mold setup and startups, ensuring our injection molding machines and equipment are primed for success. Get ready to flex your problem-solving muscles as you tackle maintenance and repairs on our advanced machines while supporting automation and ultrasonic welding setups. Your expertise will directly contribute to our production activities, fostering a fun and energetic factory environment where every day brings fresh challenges and opportunities for innovation. Join us, and let's make magic happen together in the world of injection molding! Knowledge and skills required for the position are: Experience with injection molding would be nice but always willing to train the right individual Maintenance and repair abilities Good attendance Attention to detail Make your move We're looking for talented individuals like you to join our team and help us achieve our goals. If you're passionate, driven, and committed to making a difference, we want to hear from you! Don't wait - apply now and take the first step towards a fulfilling career with endless possibilities. Let's work together to make great things happen!

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Appliance & Electronics Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As an Appliance & Electronics Technician you will be responsible for diagnostics and repair of customer units. The expectations and duties of this job are as follows: Contact customer at the start of each work day. Run all calls that are scheduled for the day. Accurately diagnose Appliances & Electronics. Order parts and put comments in the work order from the customer's home. Install parts on units and test operation when finished with installation of parts. Call tech line and document call in the system after any failed repair attempt. Finalize all billing notes from the customers home. Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time-frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time Regular Company reserves the right to add or delete from job description as needed. Compensation: $40,000.00 - $60,000.00 per year Independent Retail offers a myriad of opportunities for people of all backgrounds. When you think of jobs in retail, sales associates and store managers are probably the positions which come to mind. But what if we told you that 44% of people who work in retail don't work in sales? Retail offers flexible, collaborative careers in logistics, marketing, project management, finance, merchandising, purchasing, technical trades, and customer service - to name just a few. Retail companies are also some of the most exciting brands in the country - and they're driving the industry's innovations in customer experience. Retail is the #1 private-sector employer in the country If you're seeking to make an impact from the start of your career, spark impressive change, learn new or innovative skills and most importantly, gain success in a field that rewards ambitious hard workers, retail is for you! This employment opportunity is available at the organization listed at the top of this page. Your application will go directly to them and all hiring decisions will be made by their management. All inquiries should be made directly with the organization that posted this employment opportunity.

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Appliance & Electronics Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As an Appliance & Electronics Technician you will be responsible for diagnostics and repair of customer units. The expectations and duties of this job are as follows: Contact customer at the start of each work day. Run all calls that are scheduled for the day. Accurately diagnose Appliances & Electronics. Order parts and put comments in the work order from the customer's home. Install parts on units and test operation when finished with installation of parts. Call tech line and document call in the system after any failed repair attempt. Finalize all billing notes from the customers home. Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time-frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time Regular Company reserves the right to add or delete from job description as needed.