Manufacturing engineer jobs in Hendersonville, TN - 213 jobs

The Product Development Engineer plays a critical role in developing and executing the strategic vision for new product growth, driving innovation across existing applications and emerging market opportunities. Candidate will be responsible for leading the technical execution of development projects from initial research through to full-scale production. This includes managing key milestones, defining product and performance specifications, and ensuring alignment with project budgets and timelines. The role requires close collaboration with cross-functional teams including Customers, Sales, Commercial Development, Process Engineering, Product Management, Regulatory Affairs, and Manufacturing. RESPONSIBILITIES: Follow established Design Control procedures for the development of new products and product variances. Design experiments, execute trials, develop and interpret data and perform application testing developing new products to meet customer and market demands. Run trials on the pilot and production lines using solvent, emulsion, hot melt, and rubber-based pressure sensitive adhesives and coatings. Implement product development projects consistent with corporate objectives; ensure that project objectives are met and completed on schedule. Source, analyze and utilize new raw materials for product innovation and cost reductions. Identify equipment and processing issues that affect processing, quality, and performance while working with cross-functional teams on problem resolution and implementation. Preparation of finished good tape samples, operation, and understanding of various test equipment/methods, including application testing and data analysis for evaluation and presentation of new tape designs. Implement technical documentation packages, including raw material specifications, product specifications, stability, and general technical data to support the introduction of new products. Knowledge of ASTM standards and PSTC methods to support product testing when required. Perform additional duties as assigned by the Product Development Manager. BACKGROUND PROFILE: BS Degree in Chemical Engineering, Polymer Science, Chemistry or related experience 5+ years Product Development experience Experience in Pressure Sensitive Adhesive Tapes, Adhesives or Release liners is highly desired Competence in the basic understanding of process control equipment and the interrelations of processing conditions versus final product performance Competence in FTIR, DSC, peel adhesion, tack and shear testing, and other analytical techniques desirable Entrepreneurial and continuous innovation mindset ADDITIONAL QUALIFICATIONS: General knowledge of chemistry, chemical compatibilities, safety protocols & experience working in a laboratory or pilot setting Project Management experience required (PMP is a plus) Knowledge in statistical methods and programs (SPC/DOE/MiniTab) Proficiency with MS office to record and report data in a professional manner Ability to travel as needed Excellent verbal and written communication skills Ability to prioritize, multi-task, be a proactive thinker, and results-oriented team player Strong organizational skills with proven ability to complete multiple tasks simultaneously Strong analytical and problem-solving skills are required for data-driven project management

**GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc.)** **To help facilitate administration of relocation benefits if you are selected, please apply using the permanent address you would move from.** **Work Arrangement:** **Onsite:** This role is categorized as onsite. This means the successful candidate is expected to report to an assigned facility on a full-time basis. Each successful candidate will be offered an onsite role at a specific location. Candidate location preferences are considered but cannot be guaranteed. **What You'll Do:** Our plants are the groundwork for GM and a hotbed of innovation. We need controls engineer interns to assist maintenance personnel in operation and maintenance of specialist equipment. As a Controls Engineer Intern, you would be accountable for controls engineering and electrical support for industrial manufacturing equipment. These tasks would teach you electrical root causing analysis and problem solving as well as leadership skills to provide technical support and direction to support personnel/skilled trades within the organization. Quality and safety are extremely meaningful to us, so enforcing safe work practices is the highest priority and implementing objectives for ergonomics, health/safety, and housekeeping, which means that you would have to investigate system and equipment problems and provide technical input in problem resolution. **Responsibilities:** + Leads electrical projects including new or operations improvements, and periodic repair and replacement + Participates in functional area plant meetings and related activities to represent engineering and to assist in reaching the plant's performance goals + Develops cost estimates, investment forecasts, business cases, appropriation requests and plans for minor project activity + Utilizes statistical methods for continuous improvement on plant systems + Develops and monitors planning timetables and projects schedules + Coordinates and communicates the development of changes to improve conditions for the assembly process + Programming of manufacturing technology (PLC, robotics, HMI) + Analyzes product, process and technology to determine the best methods of manufacture + Assists in the design and building of tools and equipment or recommends improvements to existing processes **Job Location** We have opportunities available in the locations below for this role. Please indicate in your application which of these locations you are interested in. + Arlington, TX + Defiance, OH + Detroit, MI + Grand Rapids, MI + Lansing, MI + Moraine, OH + Orion, MI + Parma, OH + Saginaw, MI + Spring Hill, TN + Wentzville, MO Specific physical requirements of the position include the ability to: + Walk and stand for prolonged periods of time. + Read standardized work instructions, operate machines and tools, and perform quality inspections. + Promptly detect and respond to safety instructions, alarms, and signals. Wear personal protective equipment, for example: safety glasses, gloves, hats, ear plugs, and safety shoes. + Work in a loud manufacturing environment that is not climate controlled (conditions can be hot or cold). + Frequently and repetitively bend, twist, kneel, crouch, and reach to perform work. + Lift or carry materials weighing up to 15 pounds and periodically carry or lift materials weighing up to 40 lbs. + Occasionally sit, climb (including ladders and lifts) and drive vehicles and equipment. **Required Qualifications:** + Pursuit of a Bachelor's degree in one of the following areas: Electrical Engineering/Electrical Engineering Technology, Controls Engineering, Computer Engineering, or Computer Science + Must be graduating between August 2026 and June 2028 + Able to work full-time, 40 hours per week + Must be willing to work in a plant environment **What Will Give You a Competitive Edge (Preferred Qualifications):** + Outstanding interpersonal and relationship management skills with the ability to effectively collaborate with varying levels of the organization + Excellent written and verbal communication skills with the ability to distill complex subjects to a wider audience + Emerging partnership and collaboration skills and ability to learn from and share knowledge with co-workers in a fast-paced environment + Evidence of strong character with integrity, honesty, accountability and trust + Consistently demonstrates innovative thinking that is customer-centric + Excellent project management skills and the proven ability to manage multiple projects at any given time. Start dates for this internship role are May & June of 2026. **What you'll get from us (Benefits):** + Paid US GM Holidays + GM Family First Vehicle Discount Program + Result-based potential for growth within GM + Intern events to network with company leaders and peers **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Excellent interpersonal, written, and speaking skills required. Analytical and problem solving skills required. Attention to detail required. Strong organizational skills, with an ability to manage and coordinate multiple tasks concurrently required. Understanding of accounting principles and/or activity based costing preferred. Advanced Microsoft Office skills required: Excel, PowerPoint, Word, Outlook. Project and Access preferred. In process of obtaining an undergraduate engineering degree. Ability to interpret blueprints required. Ability to work with common hand tools required. Assisting team with inspection of parts. Aligning documentation based on feedback from the quality and manufacturing teams. Support Engineering team on excel based projects in order to make the team more efficient. Assist Engineering team with streamlining part approval process. Requirements BSME Degree preferred Entry level Engineer - preferred with intern experience, particularly in a Manufacturing setting Lean Manufacturing understanding Strong computer skills (CAD, MS office, etc.) Ability to work effectively in a team environment Desire to be hands-on Self-starter Strong verbal and written skills The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21

2026 Engineering Summer Internship Note: This is an on-site program, in Gallatin, TN. Attention Rising Juniors or Seniors pursuing a Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Engineering Technology, or Industrial Engineering. Beretta provides the opportunity to learn while collaborating in our Manufacturing Engineering and R&D Departments. We are looking for an enthusiastic, detail-oriented intern to support the Engineering Department in our manufacturing facility in Gallatin TN. The ideal candidate will have a strong interest in Design Engineering, Manufacturing Engineering (specifically in metal removal/machining processes) or Industrial Engineering, as well as introductory level experience with MS Office applications (Access, Excel, Word) and CAD/Solid Modeling software. The intern will participate in supporting various engineering functions including drawing support and data management, product validation testing, manufacturing process support, tool and fixture design and updates, plant layout, efficiency, labor and capacity planning and lean manufacturing and 5S activities. This internship will provide an excellent introduction to Beretta USA Engineering & engineering supporting functions. Duties: Provides support to the Engineering Function in the following areas: Support and assist with developing and testing manufacturing processes Troubleshoot manufacturing issues - problem solving and root cause analysis Create and maintain process documentation Support operators and setup personnel/technicians on the factory floor Support testing and validation of existing and new products in development or production Generate and update CAD drawings and solid models of components and assemblies Maintain product data including product definition documents (drawings and specifications), Bills of Material, and other supporting documentation Support product and process brainstorming and design activities Support analysis of workforce utilization, plant layout and operational data such as production cost, process flow charts, production schedules and capacity planning Recommend and support implementation of methods to improve worker efficiency and eliminate waste Perform other duties as assigned. Qualifications: Rising Juniors or Seniors pursuing a Bachelor's Degree or Senior pursuing a Master's Degree in Mechanical Engineering or Engineering Technology, Manufacturing Engineering or Engineering Technology, Industrial Engineering or related degree. Familiarity with MS Office applications Familiarity with 3D Solid modeling/CAD Ability to read and understand blueprints/drawings Strong organizational skills Ability to work in team environment with daily changing priorities

We are seeking a motivated and skilled Industrial Engineer to join our team. The ideal candidate will have a strong background in process optimization, data analysis, and systems design to improve the efficiency of our operations. As an Industrial Engineer, you will be responsible for analyzing and improving the manufacturing processes, ensuring that resources are used efficiently, and contributing to the overall improvement of the production environment. Key Duties & Responsibilities Analyze, design, and optimize manufacturing processes to improve production efficiency, reduce costs, and enhance product quality. Apply Lean Manufacturing, 5S, Value Stream Mapping, and PDCA methodologies to eliminate waste, improve workflow, and increase equipment uptime. Perform time studies, capacity analysis, and process evaluations to identify bottlenecks and support current and future production needs. Monitor, analyze, and report production and quality data using statistical methods to drive continuous improvement initiatives. Develop, maintain, and update standard operating procedures (SOPs), work instructions, and process standards, ensuring all activities are audit-ready. Support a Safety Always and Quality First culture by ensuring compliance with safety standards, industry regulations, and defect-prevention practices. Collaborate cross-functionally with production, maintenance, quality, engineering, and suppliers to troubleshoot issues and implement sustainable solutions. Design and improve manufacturing layouts, workflows, assembly methods, tools, and equipment to optimize resource utilization. Support planned maintenance improvements and apply fault analysis tools to improve equipment reliability and reduce downtime. Prepare routine engineering plans, calculations, cost estimates, and technical documentation in accordance with standard engineering practices. Assist with proposal development, consultation forms, contract documentation, and other engineering support activities as required. Manage component identification, serial number designation, inventory tracking, and purchasing documentation using SAP. Train and guide operators and technicians on efficient work practices, process standards, and safety protocols. Build strong working relationships with operators, technicians, peers, suppliers, and third-party partners to support operational goals. Maintain awareness of industry best practices, new technologies, and manufacturing trends through professional development and trade resources. Support a flexible work schedule in a 24/7 manufacturing environment, taking ownership of assigned processes and responsibilities. Perform other duties as assigned to support continuous improvement and operational excellence. Qualifications: Bachelor's degree in Industrial Engineering, Manufacturing Engineering, or a related field. 2+ years of experience in an industrial engineering or process improvement role, preferably in a manufacturing environment. Familiarity with lean manufacturing, Six Sigma, and other continuous improvement methodologies. Strong knowledge of production systems, time and motion studies, and capacity planning. Experience with process simulation software and data analysis tools (e.g., AutoCAD, MATLAB, or similar). Excellent problem-solving skills and the ability to implement practical solutions. Ability to work in a team environment and communicate effectively across departments. Detail-oriented with strong organizational and time-management skills. Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint). Familiarity with safety regulations and quality standards in manufacturing. Skills: Ability to identify inefficiencies, troubleshoot issues, and develop practical solutions to improve processes. Strong ability to analyze data and draw insights for performance improvements. Capable of managing multiple tasks and projects simultaneously, ensuring deadlines and quality standards are met. Strong written and verbal communication skills to collaborate with different teams and present findings to stakeholders. Ability to work effectively with diverse teams to achieve process improvements and meet production goals. Knowledge of engineering software tools such as CAD, simulation tools, and production management software. Ability to monitor production processes and ensure they meet quality standards and efficiency targets. Physical Demands: Must be able to frequently move about the manufacturing plant, production areas, and occasionally ascend/descend stairs Must be able to operate a computer and other office productivity machinery Must be able to occasionally move production equipment and supplies weighing up to 50 pounds Benefits: 401(k), 401(k) matching Dental insurance, health insurance, vision insurance, life insurance Paid Time Off Paid Holidays Avanti Corp is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Work Location: In person

Description Fluidra is looking for a Manufacturing Engineer to join our team in Portland, TN. WHAT YOU WILL CONTRIBUTE Plans, directs, and coordinates manufacturing processes and supports the engineering function by analyzing designs for manufacturing and assembly. Performs cost estimating, prepares bill of materials and plans and justifies capital equipment. Will also test and evaluate existing products for design and manufacturing improvements. Additionally, you will: Develops conceptual and detailed tool and equipment designs to meet product specifications. Investigates design factors such as function, materials, performance, and cost. Prepares project plans to ensure projects meet cost and schedule goals. Reviews product designs using analytical and investigative methods to ensure product requirements and specifications are met. Prepares quoting documentation (CAD drawings and cost quotes) for various production lines. Documents manufacturing processes. Creates and manages manufacturing work instructions. Creates 3D models and related 2D CAD drawings for engineering and manufacturing. Reviews and corrects drawings to ensure clarity, completeness, and conformity to standards and procedures. Confers with planning and design staff concerning product design and tooling to ensure efficient production methods. Analyzes and plans workspace requirements and workflow, designs layout of equipment and workspace for maximum efficiency. Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes. Confers with suppliers to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards. Designs and performs product testing and analysis as needed. Performs quality assurance functions as needed to ensure high levels of quality in manufacturing. Reviews, writes, and edits reports, assembly and user instructions, including evaluation plans, test results, technical manuals, etc. and provide recommendations conclusions, to engineering staff and customers. Utilize ERP system to create/maintain part numbers and bills of materials. Performs other duties as assigned. WHAT WE SEEK 5+ years of engineering work experience. Experience on value improvement of consumer products. Proficient in Microsoft programs (Word, Excel, PowerPoint), E-mail, and ERP systems. Proficient mechanical design skills using CAD software (SolidWorks and AutoDesk) 3D design capability is a must. Ability to work independently and as a team member. Good verbal and written communication skills. Proven track record of accomplished projects with increasing responsibilities and results demonstrated. Experience working with engineering and manufacturing teams. Experience working with automation and robotics within the manufacturing industry. EDUCATIONBachelor's degree (B. S.) from four-year college or university in engineering WHAT WE OFFER An exciting opportunity to dive in and begin your career with a company that offers a competitive total rewards package that includes: Full range of health benefits including medical, dental & vision, short & long-term disability 401(K) matching (100% of first 3% contributed, 50% of the next 2%) Health and wellness programs / gym reimbursement Educational assistance up to $7,000 per year Company sponsored FUN events! Generous product discounts WHO WE AREFluidra is a publicly listed company focused on developing innovative products, services and IoT solutions for the residential, commercial and wellness pool markets, globally. The company operates in over 45 countries, has over 7,000 employees and owns a portfolio of some of the industry's most recognized and trusted brands: Polaris , Jandy , CMP , S.R. Smith , and Zodiac . We also sell products under the Cover‐Pools , iAquaLink , Grand Effects , Del and Nature 2 names. With these combined resources we're able accelerate innovation in critical areas like energy-efficiency, robotics and the Internet of Things. Our focus is on creating the perfect pool and wellness experience responsibly. We take our mission to heart, and our employees embody these guiding principles in everything we do: passion for success, honesty & trust, customer collaboration, teamwork and inclusion, learn and adapt, excellence and innovation. Don't meet every single requirement listed? At Fluidra, we thrive on building an inclusive workspace, so if you are excited about this role and your past experience doesn't align perfectly, we encourage you to apply anyways! You may be just the right candidate for this role or another role in the organization. Fluidra is proud to be an equal opportunity employer. Fluidra recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, or any legally protected characteristic. For a deeper dive into our corporate culture, click here. #LI-MG1

Our client is a global manufacturer, with 12,000 employees and operations across seven countries, produces residential and commercial water heaters, boilers, and water treatment products. As a stable category leader, the company fosters a culture of continuous improvement, emphasizing Lean and Six Sigma principles along with a strong commitment to safety and ergonomics. In this Manufacturing Engineer role, the focus is on driving process improvements, managing capital projects, and applying design-for-manufacturability (DFM) strategies to enhance throughput, quality, and cost efficiency within a high-volume industrial plant. Responsibilities: Apply ergonomic and safety standards across processes, equipment, and facilities Develop, evaluate, and improve manufacturing methods using data and analysis Assess new technologies/processes to lift efficiency, productivity, quality, and cost Build capital justifications for tooling, equipment, and savings initiatives Analyze labor/space/flow; design equipment and workspace layouts for max efficiency Serve on Product Development System (PDS) teams to ensure DFM, tooling, and equipment readiness for launches Partner with vendors on specifications; source equipment/materials; evaluate to quality standards Estimate cycle times, staffing, and costs to inform management decisions Collaborate with management/engineering on capacity, schedules, and constraints Implement Lean tools: continuous improvement, kaizen/blitzes, Kanban, line balancing, TPM, takt time Team with maintenance on troubleshooting, installations, and equipment setup Qualifications: Bachelor's in Mechanical Engineering or related field 5+ years' related manufacturing engineering experience Hands-on with Six Sigma, Lean, and continuous-improvement methodologies Strong technical communication: reports, procedures, presentations to cross-functional groups Proficient in applied math and statistics (probability, statistical inference, geometry/trig; fractions/percentages/ratios) Demonstrated problem solving: define issues, collect data, establish facts, draw valid conclusions Ability to read/analyze technical procedures, standards, and regulations Compensation: Base salary to 105k/year Relocation Assistance available Comprehensive benefits: medical & dental insurance, company-paid life insurance, 401k retirement savings plan, short- & long-term disability, tuition assistance #INDALL

Our client is a global manufacturer, with 12, 000 employees and operations across seven countries, produces residential and commercial water heaters, boilers, and water treatment products. As a stable category leader, the company fosters a culture of continuous improvement, emphasizing Lean and Six Sigma principles along with a strong commitment to safety and ergonomics. In this Manufacturing Engineer role, the focus is on driving process improvements, managing capital projects, and applying design-for-manufacturability (DFM) strategies to enhance throughput, quality, and cost efficiency within a high-volume industrial plant. Responsibilities: Apply ergonomic and safety standards across processes, equipment, and facilities Develop, evaluate, and improve manufacturing methods using data and analysis Assess new technologies/processes to lift efficiency, productivity, quality, and cost Build capital justifications for tooling, equipment, and savings initiatives Analyze labor/space/flow; design equipment and workspace layouts for max efficiency Serve on Product Development System (PDS) teams to ensure DFM, tooling, and equipment readiness for launches Partner with vendors on specifications; source equipment/materials; evaluate to quality standards Estimate cycle times, staffing, and costs to inform management decisions Collaborate with management/engineering on capacity, schedules, and constraints Implement Lean tools: continuous improvement, kaizen/blitzes, Kanban, line balancing, TPM, takt time Team with maintenance on troubleshooting, installations, and equipment setup Qualifications: Bachelor' s in Mechanical Engineering or related field 5+ years' related manufacturing engineering experience Hands-on with Six Sigma, Lean, and continuous-improvement methodologies Strong technical communication: reports, procedures, presentations to cross-functional groups Proficient in applied math and statistics (probability, statistical inference, geometry/trig; fractions/percentages/ratios) Demonstrated problem solving: define issues, collect data, establish facts, draw valid conclusions Ability to read/analyze technical procedures, standards, and regulations Compensation: Base salary to 105k/year Relocation Assistance available Comprehensive benefits: medical & dental insurance, company-paid life insurance, 401k retirement savings plan, short- & long-term disability, tuition assistance #INDALL

Are you looking for your forever career? Do you strive for success? Come join our Pan-Oston family and enjoy a great working experience with us! Pan-Oston Company is an industry leader in providing metal and wood fixtures to some of retails largest members and is a Houchens Industries Employee-Owned Company - when the company does well, the employees do too! What We Offer: ESOP Retirement (Entirely employer funded retirement) Competitive health insurance prices Employer paid Dental and Vision Insurance Opportunities for growth Employer provided group Short and Long Term Disability Employer provided Life and AD&D Insurance Pan-Oston is seeking high-potential, highly motivated and skilled team players to join our team! We have an immediate opening for the following position: Manufacturing Engineer PURPOSE OF POSITION: The purpose of this position is to lead and direct all manufacturing engineering and requirements of company. RESPONSIBILITY AND AUTHORITY: To be an expert in industrial production, to be in charge of researching and developing methods to design, build, and ship various items. This position determines the best way to use a piece of machinery and to maximize efficiency of the assembly line workers. This position will determine what new machinery or polices are needed at a company. This position is in charge of performing broad research on existing technology and techniques and help to determine the most suitable equipment to use and decide on how that equipment should be stationed on the factory floor. This position will continuously work on ways to improve worker safety and satisfaction. This position will write training manuals, develop worker classes, and conduct performance reviews. ESSENTIAL FUNCTIONS OF THE POSITION: Identify, organize, and lead teams to resolve production and product issues. Plans, directs, and coordinates all manufacturing processes. Identify and implement cost savings and supports safety initiatives Adapt machine or equipment design to factory and production conditions. Design arrangement of machines within plant facilities to ensure most efficient and productive layout. Assist in managing the spending to achieve financial objectives Assist in managing capital investments in equipment and infrastructure Leads the organization's implementation of lean manufacturing principles. Develops, evaluates, and improves manufacturing methods using knowledge of product design, material and parts, fabrication processes, tooling and production equipment capabilities, assembly, methods and quality control standards. Analyzes and plan work force utilization, space requirements, workflow, and layout Create tooling, fixtures and jigs to support manufacturing throughput. Qualifications MINIMUM POSITION REQUIREMENTS (Skills & Abilities) Well prepared, organized & detail-oriented Good communication skills Ability to gather and analyze data to improve processes and machine operations Have a deep understanding of math, physics, and computer skills Goal oriented, results driven Flexible in organizing work in a changing priority environment Problem-solving skills and the ability to handle multiple projects simultaneously Strong interpersonal and leadership skills PHYSICAL DEMANDS Must be able to lift up to 40 lbs. TOOLS AND/OR EQUIPMENT USED: Working knowledge of Microsoft Office software (e.g., spreadsheets, word processing, databases and presentations), ERP systems, AutoCAD or DraftSight, and 3D parametric design software (SolidWorks) is a plus. EDUCATION: Bachelor's degree in engineering TECHNICAL TRAINING: OTHER: Maintain the highest level of integrity and ethics in all dealings with internal and external customers. WORK EXPERIENCE: 3 plus years of manufacturing experience preferred.

2026 Summer Internship Program Holley Performance Products is seeking a driven and detail-oriented Manufacturing Engineer Intern to support process improvement, production efficiency, and quality initiatives within our manufacturing operations. The intern will work closely with engineers, technicians, and production teams to enhance performance, safety, and product quality-helping Holley continue its mission of delivering superior high-performance automotive aftermarket products. This internship offers hands-on experience in modern manufacturing environments while embodying Holley's values of creating the future, engaging fearlessly, building together, and living authentically. Key Responsibilities: Assist in the development, testing, and implementation of manufacturing processes to improve efficiency, quality, and safety. Support the design and optimization of tooling, fixtures, and assembly methods to enhance production performance. Collaborate with cross-functional teams to identify and resolve production bottlenecks, quality issues, and process inefficiencies. Participate in root cause analysis and corrective action implementation for production challenges. Help develop and update process documentation, including standard operating procedures (SOPs), work instructions, and visual aids. Collect and analyze production data to support continuous improvement and cost-reduction projects. Assist with equipment layout design, workflow optimization, and ergonomic assessments to improve safety and productivity. Contribute to Lean Manufacturing and 5S initiatives, supporting Holley's commitment to operational excellence and innovation. Qualifications: Currently pursuing a Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field. Strong analytical and problem-solving skills with a hands-on mindset. Proficiency in CAD software (AutoCAD, SolidWorks, or similar) and Microsoft Office Suite. Familiarity with Lean Manufacturing principles, Six Sigma, and process improvement methodologies is preferred. Excellent communication and collaboration skills, with a proactive approach to learning and contributing. Demonstrated interest in manufacturing innovation and automotive performance technology. Learning Outcomes: By the end of the internship, the intern will: Gain hands-on experience in modern manufacturing processes and equipment optimization. Develop an understanding of process engineering, lean methodologies, and continuous improvement tools in a production environment. Strengthen professional and technical skills through collaboration with experienced engineers and plant leaders. Contribute directly to Holley's vision of being the undisputed global leader in the automotive performance aftermarket through innovation and teamwork.

Your Opportunity as a Process Engineer The Process Engineer will be responsible for designing, implementing, and optimizing production processes to improve efficiency, reduce waste, increase throughput, and improve product quality. Ensuring that products meet quality and safety standards, as well as collaborating with other departments to troubleshoot issues and implement best practices. Location: Scottsville, KY] Work Arrangements: 100% on-site. Monday - Friday, 8am - 5pm (flexibility required) In this Role You Will: Develop technical mastery of the core production processes to deliver critical results Identify process improvements while interfacing with department managers and technicians to deliver effective initiatives Partner with technicians on corrective actions, implementations, and own and sustain results Model key safety and quality expectations related to plant operations and measure impact on process Implement Lean Manufacturing concepts in support of our High-Performance Organization (HPO) culture Leverage effective continuous improvement and problem-solving tools (why-why, fishbone, failure analysis, etc.) to address root cause Support startups for new product initiatives and capital projects Lead material and packaging improvements which could include managing material changes, qualifying alternate materials, delivering material cost savings, or participating in new product launches Collect, analyze, and utilize data to design and execute improvements Improve performance and drive loss optimization Leverage your engineering expertise to make a meaningful impact on the process and packaging systems within our manufacturing facilities. Analyze operations to improve throughput and yield, while building the capabilities of the plant teams. Continue to grow your skill sets through cross functional collaboration and direct floor exposure in our manufacturing plants. Launch your career into future roles across Operations and Supply Chain by building a strong foundation in how our products are made and how our work system functions. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: Bachelor's degree in engineering Problem solving and troubleshooting experience to identify root cause Strong interpersonal and communication skills Possess a “learner mindset” - always striving to learn more Willingness to work off shift hours and flow to the work as needed Additional skills and experience that we think would make someone successful in this role: Engineering focused experience, this could include internship and/or co-op experience Strong analytical skills to drive statistically based decision making Project management experience Willingness to travel for Factory Acceptance Tests (travel may include domestic or international travel, typically 1-2 times per year) Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: Regularly required to talk and hear. Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. Able to lift objects up to 50 pounds frequently. May push and pull heavy trash carts, dough carts, portable equipment, and catch pans. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1

Design and develop machine control systems and tooling to support new product development, product improvements, capacity expansions, and equipment rebuild projects. Focus areas will include but are not limited to: * Controls programming * CNC machining * Work cell automation * New process implementation Essential Functions: * Drives the engineering design process (concept, design, drawing creation, build, document), installation, PPAP, and long-term technical support of the manufacturing processes. This will include meeting quality, capability, cost and time targets. * Develops and implements capital or expense projects. This will include: * Researching new and established manufacturing technologies * Planning the capital and time needed to implement the technology * Writing CER (Capital Expenditure Request) proposals to be reviewed. Upon project approval, this engineer will be responsible for: * Procuring the necessary equipment. * Installing it in the manufacturing plant. * Meeting cost and time targets. * Participates in product and process design reviews. The position is responsible for helping to improve the quality of the product while lowering the cost to produce it. * Evaluate new and current product process and provide input regarding manufacturability and cost. * Support installation troubleshooting and PLC/Robotic/CNC programming on new or existing machines. * Assure that all applicable quality and safety standards are met for new and existing processes. * Travel as needed to other Brake & Wheel End facilities for process improvmenet/implementation as well as evaluation of potential suppliers. * Other duties as assigned. Education and Training: * Bachelor's degree in a related technical area is required (Mechanical or electrical engineering preferred). Minimum Qualifications * 2+ years experience in manufacturing engineering, 8+ preferred. * Professional experience in manufacturing engineering in an automated CNC environment is desirable. * Formal training in CNC machining is desirable. * Candidate must demonstrate an ability to read and understand mechanical drawings and GD&T. * 3D modeling experience is required. * Hands-on experience in tooling & fixturing methods is required. * Experience in procurement of manufacturing systems and equipment required. Physical Demands * Frequent sitting, work at a computer for extended periods of time * Must be willing to travel to Hendrickson manufacturing facilities on an as-needed basis * Must be able to work hands on with operations to validate designs & concepts. Environmental Conditions * Office setting & shop floor setting * Candidate will be working in and around industrial machinery. May be exposed to the following processes and the environmental conditions inherent with each: foundry, machining, metal surface treatment, welding. Behavioral Traits * Must be punctual, self-motivated, and ethical. * Strong communication and interpersonal skills. Must be able to work well within a team environment and collaborate with different functional groups * Strong organizational skills * Strong problem solving and deductive reasoning skills * This is not a comprehensive list of duties. Duties may change without notice in management's sole discretion. Hendrickson is an at-will employer, each employee is free to resign at any time, just as Hendrickson is free to terminate employment at any time without cause or notice. Hendrickson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

To become the world's greatest baker, we need the world's greatest team members Reporting to the Continuous Improvement Team Leader, the Continuous Improvement Engineer will initiate and drive execution on projects related to standardizing best practices, continually reducing costs and increasing overall efficiencies; all within a fast-paced, high-growth food manufacturing environment. What FGF Offers: * FGF believes in Home Grown Talent, accelerated career growth with leadership training, unleashing your * Competitive Compensation, Health C Welfare Benefits including Vision C Dental and flexible options at competitive * 401k matching program * Discount program - Restaurants, gyms, shopping, * Tuition reimbursement Primary Responsibilities * As part of the Continuous Improvement (CI) team, work on multiple projects related to operations, including Manufacturing, Supply Chain, Sanitation, Quality, and Maintenance C Reliability * Collect and analyze data following a structured methodology (DMAIC) to implement sustainable improvements in all aspects of Operations * Working with a multidisciplinary team, the CI Engineer will support planning and execution of key continuous improvement projects under the guidance of the CI Team Leader * Support commissioning activities of new equipment and manufacturing lines * Create an environment which continues to foster continuous improvement and lean manufacturing * Lead training sessions for multiple teams including Production, Sanitation, Quality, and Maintenance * Support troubleshooting and driving completion of projects to enable them to be brought to fruition * Ensure that a safe working environment is maintained at all times * Working in automation and development of prototype applications Required Experience * Completed Post-Secondary Education Engineering, Business Management or a related field * 1-3 years' experience in a Continuous Improvement role in manufacturing * Certifications in Lean Six Sigma is an asset * Experience with Excel Advanced Functions and VBA is an asset * Experience with Microsoft Power Platform (Power Bi, PowerApps, Power Automate, or interest in learning) is an asset * Must have strong working knowledge of Microsoft Office * Prior work experience in a food manufacturing environment is an asset * Must possess excellent analytical skills * Must have demonstrated ability to interact with others and is adept at leading and motivating a team * Excellent interpersonal, organizational and communication skills are required * Flexible working different work schedules when needed * Must be flexible, high energy and passionate in getting things done * Valid driver's license What is the recipe for a great career at FGF? Working at FGF Brands, there is never a dull moment! FGF is a leading North American bakery company with facilities across the USA and Canada with a specialized focus across all key bakery categories, including naan, muffins, croissants, donuts, cakes, artisan breads and flatbreads. As an innovative company that is continually growing there is always challenging yet rewarding work to be a part of. We have an entrepreneurial spirit that encourages all our Team Members to use their own creativity and out-of-the-box thinking to come up with solutions and new ideas. Job Level B-HO

Job DescriptionDesign the Backbone of Clean Energy & Carbon Conversion Type: Full-Time Seniority: Mid to Senior Level / Technical Contributor Join Enexor BioEnergy Enexor is a venture-backed, early-stage climate tech company just outside of Nashville, TN, developing distributed systems that turn organic and plastic waste into clean energy and high-purity CO₂. We are reimagining how the world addresses emissions, waste, and energy access-one modular system at a time. We're not just solving problems. We're redefining what's possible at the intersection of engineering, energy, and sustainability. Why This Role Matters We're hiring a Process Engineer with a strong mechanical foundation to help design and deploy our next-generation waste-to-energy and carbon capture systems. This is not a modeling-only role. You'll work end-to-end-translating high-level process concepts to concrete designs by developing P&IDs, performing mass and energy balances, modeling processes, selecting hardware, guiding physical builds, and gaining insights from testing. By diving into technical challenges to turn concepts into reality, your work will sit at the core of how our systems perform in the real world. This role is perfect for process design engineers with a systems background and strong mechanical intuition who want to own full process-mechanical design and get hands-on in fabrication, instrumentation, and deployment. What You'll Do Design & Simulate Separation Processes: Build and validate cyclic adsorption (TSA/PSA) flowsheets in process modeling software (including custom isotherm and kinetic models); analyze breakthrough curves, cycle efficiency, and heat integration. Perform Mass & Energy Balances: Develop detailed mass-energy balances for energy systems and carbon capture processes. Translate Models into Hardware: Generate PFDs and P&IDs from your process simulations; size pressure vessels, adsorption beds, heat exchangers, pumps/blowers, and piping networks based on process conditions. 3D CAD Layout & Mechanical Detailing: Create or review CAD assemblies and AutoCAD schematics to ensure the process equipment fits skid dimensions and meets requirements. Support Fabrication, Commissioning, & Testing: Work with the shop and controls teams to oversee fabrication, instrumentation, and loop checks; participate in testing development and data review. Data Analysis & Model Refinement: Use testing results to update simulation parameters and re-optimize cycle timings or hardware specs. Cross-Functional Collaboration: Partner daily with chemical, mechanical, and controls engineers plus technicians, aligning on control strategies, safety interlocks, and operational procedures. Continuous Improvement: Identify design-to-cost opportunities and reliability enhancements; propose material, cycle, or control refinements to boost capture rate and reduce parasitic loads. Requirements What We're Looking For Education: B.S. or M.S. in Chemical Engineering or Mechanical Engineering with significant process modeling experience. Process Modeling: 3-8 years designing and simulating adsorption or gas-separation processes-expertise in Aspen Plus (including custom isotherms & dynamic cycles), gPROMS, or equivalent. Transport & Thermodynamics: Deep understanding of mass-transfer, reaction kinetics, heat-transfer, and property estimation methods. Experimental Validation: Proven ability to validate simulation and modeling results through lab-scale or pilot-scale experimentation-designing tests, analyzing data, and refining models accordingly. Mechanical Aptitude: Hands-on experience sizing pressure vessels, piping networks, heat exchangers, pumps, and blowers; experienced in SolidWorks/Inventor and AutoCAD. Field & Commissioning Experience: Familiarity with pilot-scale builds, instrumentation calibration, loop checks, and on-site troubleshooting. Bonus Points For: Hands-on experience with cyclic adsorption systems (TSA/PSA) using Aspen Adsorption or equivalent. Designing modular or containerized process skids for rapid deployment. Control-system co-simulation (DCS/PLC loop tuning, model-based control strategies). CFD or multiphase-flow modeling to support detailed mechanical design. Scaling processes from pilot to demonstration or commercial units. Familiarity with gas-analysis instrumentation. Benefits Why You'll Love It Here Mission with urgency: Your designs will help clean up emissions and generate real impact. Hands-on everything: If you're not satisfied just modeling, you want to see your ideas come to life through building, testing, and owning full systems. Flat org, fast feedback: Make decisions, iterate quickly, and learn fast. Equity upside: Be part of a venture-backed team building breakthrough clean tech systems. Compensation & Benefits Competitive salary + equity opportunity in a fast-growing climate tech company. 401(k) plan and health insurance stipend (QSEHRA). Paid vacation and holidays. Ready to Design Systems That Matter? Send your resume and a brief note to ******************. Highlight your experience with process-mechanical systems, gas treatment, or thermal integration.

Your Opportunity as a Process Engineer The Process Engineer will be responsible for designing, implementing, and optimizing production processes to improve efficiency, reduce waste, increase throughput, and improve product quality. Ensuring that products meet quality and safety standards, as well as collaborating with other departments to troubleshoot issues and implement best practices. Location: Scottsville, KY] Work Arrangements: 100% on-site. Monday - Friday, 8am - 5pm (flexibility required) In this Role You Will: * Develop technical mastery of the core production processes to deliver critical results * Identify process improvements while interfacing with department managers and technicians to deliver effective initiatives * Partner with technicians on corrective actions, implementations, and own and sustain results * Model key safety and quality expectations related to plant operations and measure impact on process * Implement Lean Manufacturing concepts in support of our High-Performance Organization (HPO) culture * Leverage effective continuous improvement and problem-solving tools (why-why, fishbone, failure analysis, etc.) to address root cause * Support startups for new product initiatives and capital projects * Lead material and packaging improvements which could include managing material changes, qualifying alternate materials, delivering material cost savings, or participating in new product launches * Collect, analyze, and utilize data to design and execute improvements * Improve performance and drive loss optimization * Leverage your engineering expertise to make a meaningful impact on the process and packaging systems within our manufacturing facilities. * Analyze operations to improve throughput and yield, while building the capabilities of the plant teams. * Continue to grow your skill sets through cross functional collaboration and direct floor exposure in our manufacturing plants. * Launch your career into future roles across Operations and Supply Chain by building a strong foundation in how our products are made and how our work system functions. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: * Bachelor's degree in engineering * Problem solving and troubleshooting experience to identify root cause * Strong interpersonal and communication skills * Possess a "learner mindset" - always striving to learn more * Willingness to work off shift hours and flow to the work as needed Additional skills and experience that we think would make someone successful in this role: * Engineering focused experience, this could include internship and/or co-op experience * Strong analytical skills to drive statistically based decision making * Project management experience * Willingness to travel for Factory Acceptance Tests (travel may include domestic or international travel, typically 1-2 times per year) Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: * Regularly required to talk and hear. * Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. * Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. * Able to lift objects up to 50 pounds frequently. * May push and pull heavy trash carts, dough carts, portable equipment, and catch pans. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1

Work for an automated machine-building company that designs and manufactures custom machinery for all industries including automotive, cosmetics, injection molding, medical, and others. This OEM works closely with its customers to bring their visions to life while also ensuring that productivity and profitability are maximized. Join their team in La Vergne, TN as a Controls Engineer! Why work here: The company promotes a team atmosphere in the workplace and makes a concerted effort to keep the lines of communication open between all employees and management through daily interactions as well as social activities scheduled throughout the year. Their facilities and equipment are modern and use state-of-the-art technology. They pay competitive wages based on performance and offer clean and, in some cases, air-conditioned facilities to work in. Health, dental, & vision Paid vacation Paid sick time 401k Matching And more! Duties & Responsibilities: Design complex automation equipment per defined project scope including all control systems and robotics. Have knowledge in robotic programming, PLC programming, Robot simulation, and HMI programming, and be able to implement it into robust designs. Generate electrical schematics and BOMs in compliance with established company standards and applicable regulatory codes. Create and document control system software programs using structured programming techniques, for PLCs, HMIs, PCs, and Robots as necessary. Develop approved drawings, programming, and design standards for the department. Responsible for reviewing assigned project schedules and providing the necessary effort\work hours to ensure all targets can be made or making a detailed request for assistance to Controls Engineering Manager immediately when it is determined targets cannot be made with your individual effort. Test and debug machines and systems. Support installation, testing, and debugging of machines and systems at customers' facilities. Responsible for updating all drawings after a job is complete. Responsible for writing portions of the machine operation manual, specifically, the Controls and Operation sections. Communication with customers, vendors, and co-workers in a professional and courteous manner. Participate in design and review meetings for assigned projects. Provide support for any control system issue or concern with customers. Travel for machine installation as required. Travel as required for Sales calls or meetings. Assist the Applications department with quotations including pricing, write-up, concept drawings, and schedule when requested. Qualifications: BS/AS Degree in Engineering discipline and/or relevant experience in lieu of degree 5+ years of Industrial Automation experience Experience with various controls platforms (Allen-Bradley, Siemens, and others) Experience with PLC and HMI programming and troubleshooting Must be able to travel up to 30% Experience with AutoCAD Electrical or other drafting software Experience with programming robots (ABB, Fanuc, and others)

GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc.) To help facilitate administration of relocation benefits if you are selected, please apply using the permanent address you would move from. Work Arrangement: Onsite: This role is categorized as onsite. This means the successful candidate is expected to report to an assigned facility on a full-time basis. Each successful candidate will be offered an onsite role at a specific location. Candidate location preferences are considered but cannot be guaranteed. What You'll Do: Our plants are the groundwork for GM and a hotbed of innovation. We need controls engineer interns to assist maintenance personnel in operation and maintenance of specialist equipment. As a Controls Engineer Intern, you would be accountable for controls engineering and electrical support for industrial manufacturing equipment. These tasks would teach you electrical root causing analysis and problem solving as well as leadership skills to provide technical support and direction to support personnel/skilled trades within the organization. Quality and safety are extremely meaningful to us, so enforcing safe work practices is the highest priority and implementing objectives for ergonomics, health/safety, and housekeeping, which means that you would have to investigate system and equipment problems and provide technical input in problem resolution. Responsibilities: Leads electrical projects including new or operations improvements, and periodic repair and replacement Participates in functional area plant meetings and related activities to represent engineering and to assist in reaching the plant's performance goals Develops cost estimates, investment forecasts, business cases, appropriation requests and plans for minor project activity Utilizes statistical methods for continuous improvement on plant systems Develops and monitors planning timetables and projects schedules Coordinates and communicates the development of changes to improve conditions for the assembly process Programming of manufacturing technology (PLC, robotics, HMI) Analyzes product, process and technology to determine the best methods of manufacture Assists in the design and building of tools and equipment or recommends improvements to existing processes Job Location We have opportunities available in the locations below for this role. Please indicate in your application which of these locations you are interested in. Arlington, TX Defiance, OH Detroit, MI Grand Rapids, MI Lansing, MI Moraine, OH Orion, MI Parma, OH Saginaw, MI Spring Hill, TN Wentzville, MO Specific physical requirements of the position include the ability to: Walk and stand for prolonged periods of time. Read standardized work instructions, operate machines and tools, and perform quality inspections. Promptly detect and respond to safety instructions, alarms, and signals. Wear personal protective equipment, for example: safety glasses, gloves, hats, ear plugs, and safety shoes. Work in a loud manufacturing environment that is not climate controlled (conditions can be hot or cold). Frequently and repetitively bend, twist, kneel, crouch, and reach to perform work. Lift or carry materials weighing up to 15 pounds and periodically carry or lift materials weighing up to 40 lbs. Occasionally sit, climb (including ladders and lifts) and drive vehicles and equipment. Required Qualifications: Pursuit of a Bachelor's degree in one of the following areas: Electrical Engineering/Electrical Engineering Technology, Controls Engineering, Computer Engineering, or Computer Science Must be graduating between August 2026 and June 2028 Able to work full-time, 40 hours per week Must be willing to work in a plant environment What Will Give You a Competitive Edge (Preferred Qualifications): Outstanding interpersonal and relationship management skills with the ability to effectively collaborate with varying levels of the organization Excellent written and verbal communication skills with the ability to distill complex subjects to a wider audience Emerging partnership and collaboration skills and ability to learn from and share knowledge with co-workers in a fast-paced environment Evidence of strong character with integrity, honesty, accountability and trust Consistently demonstrates innovative thinking that is customer-centric Excellent project management skills and the proven ability to manage multiple projects at any given time. Start dates for this internship role are May & June of 2026. What you'll get from us (Benefits): Paid US GM Holidays GM Family First Vehicle Discount Program Result-based potential for growth within GM Intern events to network with company leaders and peers About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

We are seeking a motivated and skilled Industrial Engineer to join our team. The ideal candidate will have a strong background in process optimization, data analysis, and systems design to improve the efficiency of our operations. As an Industrial Engineer, you will be responsible for analyzing and improving the manufacturing processes, ensuring that resources are used efficiently, and contributing to the overall improvement of the production environment. Key Duties & Responsibilities Analyze, design, and optimize manufacturing processes to improve production efficiency, reduce costs, and enhance product quality. Apply Lean Manufacturing, 5S, Value Stream Mapping, and PDCA methodologies to eliminate waste, improve workflow, and increase equipment uptime. Perform time studies, capacity analysis, and process evaluations to identify bottlenecks and support current and future production needs. Monitor, analyze, and report production and quality data using statistical methods to drive continuous improvement initiatives. Develop, maintain, and update standard operating procedures (SOPs), work instructions, and process standards, ensuring all activities are audit-ready. Support a Safety Always and Quality First culture by ensuring compliance with safety standards, industry regulations, and defect-prevention practices. Collaborate cross-functionally with production, maintenance, quality, engineering, and suppliers to troubleshoot issues and implement sustainable solutions. Design and improve manufacturing layouts, workflows, assembly methods, tools, and equipment to optimize resource utilization. Support planned maintenance improvements and apply fault analysis tools to improve equipment reliability and reduce downtime. Prepare routine engineering plans, calculations, cost estimates, and technical documentation in accordance with standard engineering practices. Assist with proposal development, consultation forms, contract documentation, and other engineering support activities as required. Manage component identification, serial number designation, inventory tracking, and purchasing documentation using SAP. Train and guide operators and technicians on efficient work practices, process standards, and safety protocols. Build strong working relationships with operators, technicians, peers, suppliers, and third-party partners to support operational goals. Maintain awareness of industry best practices, new technologies, and manufacturing trends through professional development and trade resources. Support a flexible work schedule in a 24/7 manufacturing environment, taking ownership of assigned processes and responsibilities. Perform other duties as assigned to support continuous improvement and operational excellence. Qualifications: Bachelors degree in Industrial Engineering, Manufacturing Engineering, or a related field. 2+ years of experience in an industrial engineering or process improvement role, preferably in a manufacturing environment. Familiarity with lean manufacturing, Six Sigma, and other continuous improvement methodologies. Strong knowledge of production systems, time and motion studies, and capacity planning. Experience with process simulation software and data analysis tools (e.g., AutoCAD, MATLAB, or similar). Excellent problem-solving skills and the ability to implement practical solutions. Ability to work in a team environment and communicate effectively across departments. Detail-oriented with strong organizational and time-management skills. Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint). Familiarity with safety regulations and quality standards in manufacturing. Skills: Ability to identify inefficiencies, troubleshoot issues, and develop practical solutions to improve processes. Strong ability to analyze data and draw insights for performance improvements. Capable of managing multiple tasks and projects simultaneously, ensuring deadlines and quality standards are met. Strong written and verbal communication skills to collaborate with different teams and present findings to stakeholders. Ability to work effectively with diverse teams to achieve process improvements and meet production goals. Knowledge of engineering software tools such as CAD, simulation tools, and production management software. Ability to monitor production processes and ensure they meet quality standards and efficiency targets. Physical Demands: Must be able to frequently move about the manufacturing plant, production areas, and occasionally ascend/descend stairs Must be able to operate a computer and other office productivity machinery Must be able to occasionally move production equipment and supplies weighing up to 50 pounds Benefits: 401(k), 401(k) matching Dental insurance, health insurance, vision insurance, life insurance Paid Time Off Paid Holidays Avanti Corp is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Work Location: In person

Job Description 2026 Summer Internship Program Holley Performance Products is seeking a driven and detail-oriented Manufacturing Engineer Intern to support process improvement, production efficiency, and quality initiatives within our manufacturing operations. The intern will work closely with engineers, technicians, and production teams to enhance performance, safety, and product quality-helping Holley continue its mission of delivering superior high-performance automotive aftermarket products. This internship offers hands-on experience in modern manufacturing environments while embodying Holley's values of creating the future, engaging fearlessly, building together, and living authentically. Key Responsibilities: Assist in the development, testing, and implementation of manufacturing processes to improve efficiency, quality, and safety. Support the design and optimization of tooling, fixtures, and assembly methods to enhance production performance. Collaborate with cross-functional teams to identify and resolve production bottlenecks, quality issues, and process inefficiencies. Participate in root cause analysis and corrective action implementation for production challenges. Help develop and update process documentation, including standard operating procedures (SOPs), work instructions, and visual aids. Collect and analyze production data to support continuous improvement and cost-reduction projects. Assist with equipment layout design, workflow optimization, and ergonomic assessments to improve safety and productivity. Contribute to Lean Manufacturing and 5S initiatives, supporting Holley's commitment to operational excellence and innovation. Qualifications: Currently pursuing a Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field. Strong analytical and problem-solving skills with a hands-on mindset. Proficiency in CAD software (AutoCAD, SolidWorks, or similar) and Microsoft Office Suite. Familiarity with Lean Manufacturing principles, Six Sigma, and process improvement methodologies is preferred. Excellent communication and collaboration skills, with a proactive approach to learning and contributing. Demonstrated interest in manufacturing innovation and automotive performance technology. Learning Outcomes: By the end of the internship, the intern will: Gain hands-on experience in modern manufacturing processes and equipment optimization. Develop an understanding of process engineering, lean methodologies, and continuous improvement tools in a production environment. Strengthen professional and technical skills through collaboration with experienced engineers and plant leaders. Contribute directly to Holley's vision of being the undisputed global leader in the automotive performance aftermarket through innovation and teamwork.