Explore jobs
Find specific jobs
Explore careers
Explore professions
Best companies
Explore companies
Best manufacturing engineer certifications
Manufacturing engineer certifications allow job seekers to demonstrate their competency as an manufacturing engineer to employers. However, not all manufacturing engineer certifications provide the same value for job seekers.
The best certifications for a manufacturing engineer are Six Sigma Green Belt, Engineer In Training Certification (EIT), and Certified Manufacturing Engineer (CMfgE).
Below is a list of the best manufacturing engineer certifications. Obtaining an manufacturing engineer certification will give you a leg up when you apply for jobs and increase your potential salary.
20 best certifications for manufacturing engineers
20 best manufacturing engineer certifications
1. Six Sigma Green Belt
The IASSC Certified Lean Six Sigma Green Belt (ICGB) is a professional who is well versed in the Lean Six Sigma Methodology who both leads or supports improvement projects, typically as a part-time role. A Lean Six Sigma Green Belt possesses a thorough understanding of all aspects within the phases of D-M-A-I-C. They understand how to perform and interpret Six Sigma tools and how to use standard principles of Lean.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
2. Engineer In Training Certification (EIT)
The EIT Certification, which is formally known as the Engineer In Training Certification, is simply a document, a number, granted by the individual’s state engineering board after they pass the Engineer In Training Exam. The Engineer in Training Exam (EIT Exam) is the first of two exams you will take as you move towards obtaining your Professional Engineering License (PE). This exam, which you may also hear referred to as the Fundamentals of Engineering exam (FE Exam), is developed and administered in all states (and a number of locations outside the US) by the National Council of Examiners for Engineering and Surveying (NCEES). The FE Exam is offered to eligible students year-round in four different testing windows.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? No
- Renewal required? No
3. Certified Manufacturing Engineer (CMfgE)
Professionals who earn a CMfgE demonstrate a comprehensive knowledge of manufacturing processes and practices. Pursuing a CMfgE certification requires a minimum of 8 years of combined manufacturing-related education and/or work experience, including a minimum of 4 years of work experience. A CMfgT with a minimum of 7 years manufacturing-related work experience and/or education also qualifies.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
4. Certified Manufacturing Specialist (CMS)
Certified Manufacturing Specialist (CMS) program is geared toward programs with a strong manufacturing emphasis
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
5. Microsoft Dynamics AX 2012 Lean Manufacturing
This exam is designed for partners, consultants, pre-sales consultants, and professionals who plan to use lean manufacturing functions in Microsoft Dynamics AX 2012. Candidates should have a general working knowledge of Microsoft Dynamics AX 2012, including production and trade and logistics concepts, along with a moderate understanding of basic lean manufacturing concepts and production processes.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
6. Six Sigma Black Belt
The IASSC Certified Lean Six Sigma Black Belt (ICBB) is a professional who is well versed in the Lean Six Sigma Methodology, who leads improvement projects, typically in a full-time role. A Lean Six Sigma Black Belt possesses a thorough understanding of all aspects within the phases of D-M-A-I-C. They understand how to perform and interpret Six Sigma tools and how to use standard principles of Lean.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
7. Certified Agile Developer (CAD)
Agile approaches help teams respond to unpredictability through incremental, iterative work cadences, known as sprints. Agile methodologies are an alternative to waterfall, or traditional sequential development. Agile, a popular method of delivering top-quality software on schedule through a collaborative, iterative approach. Certification helps in understanding the key principles of Agile software development, which promote faster release cycles, better deliverable's and the ability to adapt quickly to changing circumstances. You’ll gain knowledge on policies and process improvements that can enhance interactions between developers and project and program managers. Agile software development, uses iterative, feature-driven, customer-focused Agile practices to develop applications that meet user requirements. In this certification, you also gain practical experience performing each role within an Agile team.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? No
- Renewal required? No
8. Project Management Professional (PMP)
The PMP designation following your name tells current and potential employers that you have demonstrated a solid foundation of knowledge from which you can competently practice project management.To be eligible for a PMP Credential, you must first meet specific educational and project management experience requirements and agree to adhere to a code of professional conduct. The final step to becoming a PMP is passing a rigorous multiple-choice examination designed to objectively assess and measure your ability to apply project management knowledge in the following six domains: initiating the project, planning the project, executing the project, monitoring and controlling the project, closing the project, and professional and social responsibility. This computer-based examination is administered globally with translation aids in 10 languages.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
9. Certified Quality Engineer (CQE)
The Certified Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use metrology and statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
10. Certified Six Sigma Greenbelt (CSSGB)
The Six Sigma Green Belt operates in support of or under the supervision of a Six Sigma Black Belt, analyzes and solves quality problems and is involved in quality improvement projects. A Green Belt is someone with at least three years of work experience who wants to demonstrate his or her knowledge of Six Sigma tools and processes.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
11. Six Sigma Yellow Belt
The IASSC Certified Lean Six Sigma Yellow Belt (ICYB) is a professional who is versed in the basics of the Lean Six Sigma Methodology who supports improvement projects as a part of a team or conducts small projects on a part time basis. A Lean Six Sigma Yellow Belt possesses an understanding of the aspects within the phases of D-M-C.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
12. Certified Manufacturing Technologist (CMfgT)
This certification primarily benefits new manufacturing engineers and experienced manufacturers without other credentials. Pursuing a CMfgT certification requires a minimum of 4 years combined manufacturing-related education and/or work experience.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
13. Certified Machine Tool Sales Engineer (CMTSE)
The Certified Machine Tool Sales Engineer (CMTSE) Program is the only nationally recognized program that acknowledges individuals who possess the skills and knowledge needed to perform effectively as machine tool sales engineers.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
14. Certified Quality Auditor (CQA)
The Certified Quality Auditor is a professional who understands the standards and principles of auditing and the auditing techniques of examining, questioning, evaluating and reporting to determine a quality system's adequacy and deficiencies. The Certified Quality Auditor analyzes all elements of a quality system and judges its degree of adherence to the criteria of industrial management and quality evaluation and control systems.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
15. Engineering Management Certification Fundamentals (EMCF)
The EMCF examination emphasizes fundamental aspects and principles of engineering management and is designed for early career engineers and other technical professionals. If you are an early career engineer, scientist, or other technologist intent on entering engineering management on your career path, then the EMCF credential is right for you.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
16. Certified Planning Engineer (CPE)
Our AAPM Global Board of Standards issues the CPE Certified Planning Engineer - Board Certification to qualified applicants who have met our commission requirements of: Education, Training, Experience, Industry Knowledge, Ethics, and Continuing Education.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 2 year(s)
17. Certified Systems Engineering Professional (CSEP)
Targeted towards systems engineers with five or more years of systems engineering work experience
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 5 year(s)
18. Certified Energy Manager (CEM)
CEM, which stands for Certified Energy Manager®, recognizes individuals who have demonstrated high levels of experience, competence, proficiency, and ethical fitness in the energy management profession. Each CEM candidate must meet one of the following criteria. A four-year engineering degree and/or P.E., with at least three years experience in energy engineering or energy management.A four-year business or related degree, with at least five years experience in energy engineering or energy management.A two-year technical degree, with eight years experience in energy engineering or energy management.Ten years or more verified experience in energy engineering or energy management.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
19. Program Management Professional (PgMP)
Project Management Institute's newest credential is specifically developed to acknowledge the qualifications of the professional who leads the coordinated management of multiple projects and ensures the ultimate success of a program. You will benefit from the many advantages of this new designation. Candidates earning this credential will be internationally recognized as professionals with the knowledge and experience to make and implement the important decisions and accomplish the strategic objectives that enhance business results.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
20. Certified Quality Improvement Associate (CQIA)
The Certified Quality Improvement Associate has a basic knowledge of quality tools and their uses and is involved in quality improvement projects, but doesn't necessarily come from a traditional quality area.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
What is the best certification for a manufacturing engineer?
The best manufacturing engineer certification is Six Sigma Green Belt. The Six Sigma Green Belt is awarded by the International Association of Six Sigma Certification. The advanced certification is for more experienced employees as it often requires some work experience to acquire.
Here's a bit more background on how to obtain this manufacturing engineer certification:
- To become a certified Six Sigma Green Belt, you need to pass the exam.
- This certificate requires more than two years of work experience.
- Renew certification every year.
What are some of the most in-demand certifications for manufacturing engineers?
The most in-demand manufacturing engineer certification is Six Sigma Green Belt based on all active job postings. Having this manufacturing engineer certification will give you access to more manufacturing engineer jobs with higher salaries.
What certifications can impact a manufacturing engineer career and salary?
The Project Management Professional certification will help you to secure a senior manufacturing engineer position, which will increase your pay and career trajectory. A senior manufacturing engineer's average salary is $83,590 whereas manufacturing engineers make an average salary of $78,522.
The most common combination of manufacturing engineer certifications include: Six Sigma Green Belt, Engineer In Training Certification (EIT), and Certified Manufacturing Engineer (CMfgE).
Online courses for manufacturing engineers to earn certifications
1. Engineering and Product Design Processes
Welcome to “Engineering and Product Design Processes!” In this short course, you will learn how engineering design processes and product design processes are carried out. After the course, you will be familiar with the steps in both design processes. You will also be familiar with the main goal of each design process, as well as their similarities and differences...
2. Introduction to Mechanical Engineering Design and Manufacturing with Fusion 360
Design for manufacturing is the process of designing parts, components, or products with the understanding surrounding design requirements for a specific manufacturing method. This course explores the design for manufacture workflow and shows how to validate models and create the G code, the programming language needed to instruct the CNC machine on how to move. We practice the basics of part and assembly design, and tools such as animation, rendering, and simulations using Autodesk Fusion 360...
3. Manufacturing Guide for Mechanical Product Development
Learn how everyday physical products are manufactured with no prior experience in engineering...
4. Manufacturing process selection and Design for manufacturing
Learn about the basics of selecting process for a mechanical design and the principles of design for Manufacturing...
5. Intro to Digital Manufacturing with Autodesk Fusion 360
The manufacturing industry is making a digital transformation, allowing companies to customize production through advances in machine learning, sustainable design, generative design, and collaboration, with integrated design and manufacturing processes. This course introduces innovations in CAD and digital manufacturing, speaking to the rapid changes taking place that are forever transforming the future of making. This course will also explore foundational concepts behind Autodesk® Fusion 360™...
6. Semiconductor Packaging Manufacturing
This course will provide information on the various stages of semiconductor package manufacturing, including sort, assembly, and final test. In addition, we will also describe how to select, build, and test the packages with the die and other components to ensure the quality of the package and total assembly performance. We will also discuss the role of Process Control Systems in semiconductor manufacturing as they relate to quality testing. Specifically, we will explore how Process Control...
7. Product Development & Systems Engineering
The complete Product Development & Systems Engineering course! Earn 25 contact hours AND prepare to take the INCOSE Exam...
8. The Production Part Approval Process (PPAP)
The 18-step process for ensuring new parts are consistently manufactured and meet their customers' quality expectations...
9. Introduction to SOLIDWORKS
Learn the fundamentals of SOLIDWORKS engineering and design software including parts, drawings, and assemblies...
10. Mechanical design and Product development process
Learn the basic ideas and concepts behind developing mechanical products related to mechanical engineering...
11. Lean Manufacturing A-Z: Lean Operations Management
Lean Business Operations Management, Lean Process and Systems Improvement in Production and Industry. MBA style course...
12. Kaizen Practitioner Masterclass for Quality Management.
Structured Approach to identify and Eliminate waste in Business for Continuous Improvement & Quality Management...
13. Understanding Engineering Drawings
How Technical Information is Conveyed from Engineers and Designers to Manufacturing and Supply Chain Professionals...
14. Product Design Management for Agile Practitioners
Application of product design management principles, concepts, tools and techniques in agile product management...
15. Technical Product Management: learn on 4 real industry cases
Boost your technicality (as a PM) or tech product skills (as an engineer) to grow in your current role...
16. Learning SOLIDWORKS: For Students, Engineers, and Designers
For Basic and Intermediate Users...
17. Certified Quality Engineer Training [2022]
Comprehensive Certified Quality Engineer (CQE) Exam Preparation Course (2022 Body of Knowledge)...
18. Product Management Crash Course; IT Product Management
Product Management Essentials & Product Management Fundamentals to kick-start your career in Product Management...
19. Introduction Agile & Scrum for Product Owners
[UNOFFICIAL] Learn about agility & Scrum. Prepare for your Project Manager or Product Owner certification in 2023!...
20. Comprehensive Product management for Product managers
Become a great product manager with comprehensive product management Real world case study with JIRA & Confluence...