Manufacturing engineer jobs in Lauderhill, FL

The ideal candidate possesses both a high level of technical expertise and an innate passion to build. You will play a critical role in creating and refining processes in order to improve manufacturing safety, quality, and productivity. Duties/Responsibilities: Document proper standard time for each unit/job scheduled to be produced at the DB USA. Proficient at preparing, checking, and coordinating the release of documentation to support Chillers and AHU Units manufacturing processes. Review and analyze engineering drawings and documents as necessary. Assure tools and fixtures are on hand and suitable for work. Work with the sales & engineering departments to resolve order issues. Recommend cost savings and value engineering alternatives for Chillers and AHU Units. Provide labor time information to the field sales & service departments for Chillers & AHU Units. Provide technical support to sales & service departments on all aspects of repair/install defective components for Chillers & AHU Units. Support Customer Visits (factory tours) as necessary. Provide support to the development of sales/selection software. Strive for continuous improvement and teamwork in product development and processes. Qualifications Bachelor's Degree in Mechanical Engineering, Industrial or Manufacturing Engineering 3-5 years or more experience in HVAC manufacturing engineering. Six Sigma Green or Black Belt preferred Required Skills Knowledge of refrigerant cycle function and HVAC manufacturing processes Exposure to Metal/Mechanical assembly processes Analytical problem-solving skills Exceptional understanding of lean manufacturing principals (e.g., SMED, waste reduction, one piece flow, etc.) Experience with time studies, line balancing, labor standards development Experience with AutoCAD or other programs for development of plant and work cell layouts Use of spreadsheet tools for line balancing and labor analysis Ability to use spreadsheets for inventory analysis and warehouse area layouts Preferred Skills Bachelor's degree in either Industrial or Mechanical Engineering At least 1 - 2 years' of engineering experience Experience with Lean, Six Sigma, Kaizen, Kanban and 5S Physical Demands and work environment: Occasionally/Frequently/Continually required to walk Occasionally/Frequently/Continually required to sit for long periods at a desk and working on a computer Occasionally/Frequently/Continually required to utilize hand and finger dexterity Occasionally/Frequently/Continually required to talk or hear While performing the duties of this job, the noise level in the work environment is usually loud; very loud Occasionally/Frequently/Continually work near moving mechanical parts

We are looking for a Platform Reliability Engineer with strong experience in DevOps and Site Reliability Engineering (SRE) practices. The ideal candidate will focus on ensuring platform stability, scalability, and automation across cloud environments. Required Skills DevOps practices and CI/CD pipelines Terraform for Infrastructure as Code (IaC) Azure cloud services SRE principles (monitoring, incident management, reliability improvement)

About Company At Ennovi we harness the power of two megatrends - electrification and AI - to help industries innovate at speed, operate smarter, and achieve sustainable growth. By combining these transformative forces with our global reach and best talent, we empower our customers to lead their markets and drive sustainable progress. From automotive to aerospace, consumer electronics, data storage, industrial, and medical markets, we help our customers achieve these megatrends by creating smarter, safer, and more sustainable solutions. We excel in developing high-performance, custom solutions that meet diverse technical needs, solve unique challenges, optimize performance, and adapt to evolving market demands. Our mission is to get customers to the future faster, from anywhere. Headquartered in Singapore, ENNOVI has a global presence across North America, Europe, SEA and China, where all its activities are socially responsible, with minimal environmental impact. Learn more at *************** Why Join Us At Ennovi, we envision a future of electrification and innovation and strive to create an inspiring workplace where our employees are integral to shaping that future. We offer a dynamic, collaborative and inclusive culture that encourages continuous learning, professional growth, and a sense of purpose. As a part of the Ennovi team, employees experience the excitement of being at the forefront of cutting-edge technologies and contributing to a sustainable future. Our commitment to the transformation is epitomized by our five pillars: Speed, Innovation, Best Talent, Global Reach, and Sustainability. This entails navigating exponential market changes through agile structures, fostering innovation across all aspects of our business, strategically expanding our global footprint, championing sustainability initiatives and nurturing a winning team. Privacy Policy Ennovi is an equal opportunity employer in conformance with all applicable laws and regulations to individuals who are qualified to perform job requirements. The Company administers its personnel policies, programs, and practices in a non-discriminatory manner in all aspects of the employment relationship, including recruitment, hiring, work assignment, promotion, transfer, termination, wage and salary administration, and selection for training. By applying to this job posting, you agree with and acknowledge our privacy policy. Job Summary We are seeking a Molding Process Engineer to join our team in the Medical Business. The Molding Process Engineer reports directly to the Engineering Manager and will be responsible for the support of all internal moulding activities that include product development, validation, qualification and implementation of processes, methods and equipment. Strong process development capabilities are essential. Ennovi Medical is your end-to-end customized solutions partner, empowering OEMs to harness AI-driven technologies and accelerate innovation for medical devices. Main Responsibilities Develop, validate, and optimize injection molding processes for new and existing medical products. Collaborate with tooling, quality, and production teams to ensure robust mold designs and process capability. Lead root cause analysis and corrective actions for molding-related defects and process deviations. Support mold qualifications, including IQ/OQ/PQ protocols and documentation. Monitor and analyse process data to drive continuous improvement and reduce scrap and downtime. Specify and implement process controls to enhance molding performance. Maintain compliance with GMP, ISO 13485, and FDA requirements. Train operators and technicians on molding best practices and troubleshooting techniques. Participate in cross-functional teams for new product introductions and engineering changes. Qualifications & Skills Bachelor's degree in mechanical, Industrial, or Plastics Engineering or equivalent (5 years in relevant experience) Minimum of 3 years of experience within a Plastics/Polymer processing Experience with functioning in a highly regulated environment Strong understanding of Polymer technology and test methods Strong written and verbal communication skills Demonstrated experience in manufacturing medical devices using various manufacturing technologies Excellent process development capabilities Experience and proficient with Data Analysis, Root Cause Analysis and Statistical Method Application. Six Sigma Greenbelt and Lean Process Background Experience working with insert molding RJG Master Molder certification or equivalent. Experience with automation and robotics in molding operations. Familiarity with ERP and MES systems.

Staff Engineer (AI • Backend • Data) | backend/data engineering with Node.js and Python and AI *Ready to push boundaries in backend and data engineering for next-generation AI products?* About the Company We are an early-stage AI startup based in Miami, Florida. We are redefining the way organizations leverage data and automation for real-world operational impact. We are building the foundational data backbone and cognitive architecture that powers truly autonomous software systems. Our mission is to deliver platforms where artificial intelligence actively learns, adapts, and optimizes business outcomes; moving far beyond reporting dashboards into the realm of self-improving intelligence. About the Role Ready to push boundaries in backend and data engineering for next-generation AI products? As we scale rapidly from Seed to Series A, your work will directly shape the “nervous system” that enables products to learn from mistakes, deliver real-time insights, and support exponential growth. Responsibilities Design and deliver event-driven, high-concurrency services using Node.js and Javascript or TypeScript. Build real-time APIs and streaming platforms with frameworks such as Express, Fastify, or NestJS. Engineer robust data transformation, orchestration, and advanced ML pipelines in Python. Leverage technologies including asyncio, Pydantic, and FastAPI for scalable, asynchronous applications. Architect resilient, production-grade solutions using GCP. Experience with AWS or Azure equivalents is valued too. Build streaming infrastructure with Google Cloud Pub/Sub or Kafka, incorporate dead-letter queues, enable message replay, and support schema evolution via Protobuf or Avro. Optimize BigQuery for high-performance analytics: incorporate partitioning, clustering, materialized views, and proactive cost management. Model and synchronize real-time operational data in Firestore using denormalization techniques; support caching and queueing with Redis, relational workloads via PostgreSQL, and utilize ClickHouse or Elastic for time-series and search needs. Orchestrate modern processing workflows using Cloud Functions, Cloud Run (serverless transforms), and Dataflow or Apache Beam for both streaming and batch processing. Automate DAGs with Cloud Composer or Dagster. Manage and scale all services on Docker and Kubernetes (GKE). Provision and update infrastructure with Terraform, and deploy rapidly with GitHub Actions-using progressive delivery and canary releases to maintain stability. Lead observability initiatives with OpenTelemetry, Prometheus, Grafana, Cloud Logging and Monitoring, and structured tracing for real-time operational excellence. Enforce security, compliance, and audit standards using OAuth2 or OIDC, scoped tokens, robust secrets management, audit trails, and least-privilege IAM. Qualifications Experienced in backend and data engineering with direct production exposure to high concurrency, event-driven Node.js and JS/TS systems. Advanced Python engineer comfortable building asynchronous data flows, orchestrating ML pipelines, and integrating with the latest frameworks. Strong track record working with GCP (or equivalent cloud platforms), mastering modern streaming and analytical data stacks. Deep familiarity with distributed, real-time messaging systems, schema evolution, and automated, resilient system deployment. Infrastructure-centric: proven ability to build, automate, and monitor microservices, containers, and orchestration frameworks supporting startup velocity. Comfortable shipping at startup speed, tackling complex problems, and delivering reliable, scalable solutions for rapid user and data growth. Preferred Skills Built multi-tenant learning loops or adaptive AI pipelines in production. Delivered advanced monitoring, alerting, and automated recovery for large distributed systems. Implemented security, compliance, and operational controls in regulated environments. Help architect the core infrastructure of a transformative AI startup at an inflection point. Collaborate with a team that values radical ownership, open communication, and relentless curiosity. Competitive salary, early-stage equity, and the opportunity to innovate at the front lines of autonomous data systems. Direct impact: your work will power business-critical AI products and fuel our climb from early traction to market leadership. Equal Opportunity Statement We value direct, clear feedback, and systems thinking over corporate fluff and politics. Hybrid and on-site in Miami, no remote options. Relocation package provided.

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. In order to be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion. This position works on tasks such as RFIs, submittal processing, shop drawing review, RFQs, permit expediting, documentation management, close-outs, etc. Why Join Us? At ANF Group, we are committed to building exceptional projects and fostering a work environment where innovation, collaboration, and professionalism thrive. Company Benefits: Comprehensive health, dental, and vision insurance 401(k) retirement plan with company match Paid time off and holidays Opportunities for professional development and growth Responsibilities Responsible for RFI and submittal process. Be knowledgeable of the permit process and occupancy requirements. Oversee the set-up of job files, logs, and other documentation. Assist the Project Manager in the preparation of purchase orders, subcontracts and change orders. Review shop drawings, samples, and catalog data in accordance with plans and specifications, scope, installation procedures, site considerations, and in regard to coordination with other trades. Prepare, expedite, and monitor logs for tracking shop drawings, contract documents, submittals, and requests for information, change orders and other as determined necessary for a successful project. Check Subcontractors' applications for payment in coordination with project staff. Expedite and document Owner and Architect decisions and approvals. Maintain and review status of all project-related correspondence (i.e. field reports and RFI responses). Assist in the management of the punch list process. Obtain all closeout materials from subcontractors and supplies including guarantees and warranties, as-builts, final pay applications, lien releases, Operations and Maintenance Manuals and coordinate Owner Training and Equipment. Assist with preparing the job start-up and closeout checklists. In coordination with the Project Manager, generate all project meeting minutes. Possess working knowledge of all project plans, specifications, contract with Owner, subcontractors, purchase orders, daily correspondence, shop drawings, submittals and all other project related documents and maintain a complete and accurate set of as-builts. Actively participate in post-bid, buyout, O/A/C, coordination, subcontractor, staff, schedule and scheduling meetings. Qualifications Education: Four (4) year degree in an accredited construction related curriculum (BSCE, BSCM, BSAE, etc.) preferred. Equivalent work experience will be considered in lieu of a degree. Experience: At least one (1) year of professional experience through a formal cooperative education program or internship preferred. Key Attributes: Demonstrated interpersonal skills. Accountability. Attention to detail. Ability to prioritize work. Effective communication skills. Bilingual English/Spanish desired. Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to Race, Religious Creed, Color, National Origin, Ancestry, Physical or Mental Disability, Medical Condition, Genetic Information, Marital Status, Sex, Gender, Gender Identity, Gender Expression, Sexual Orientation, Military or Veteran status. **Company conducts post-offer, pre-employment drug screening, background check, and Motor Vehicle Report.

Structural-Builders and Restorations (S-BR) is seeking a dedicated Project Engineer to join our Restoration Division. This role provides critical support to Superintendents and Project Managers in various aspects of fieldwork, procurement, reporting, and contract management. The ideal candidate will be proactive, detail-oriented, and skilled in communication, helping ensure each project runs smoothly from start to finish. Responsibilities: Assist in fieldwork coordination and provide day-to-day support to Superintendents and Project Managers. Manage procurement processes, including materials and equipment acquisition. Prepare detailed reports, pay applications, subcontracts, and other project documentation. Coordinate with various trades and maintain open communication across project teams. Ensure compliance with project plans, shop drawings, and specifications. Contribute to project problem-solving and maintain efficiency under pressure. Qualifications: Bachelor's degree in Construction or Civil Engineering, Architecture, Project Management, or related field OR graduation set for upcoming semester. In-depth understanding of construction procedures, building systems, and tools. Proven ability to interpret plans, shop drawings, and project specifications. Strong math and computer skills, with proficiency in MS Office, Bluebeam, and On-Screen Takeoff. Excellent verbal and written communication skills, with the ability to interact effectively with workers, trades, and project stakeholders. Ability to prioritize tasks, meet deadlines, and adapt to a fast-paced work environment. If you are a results-driven engineer with a passion for construction and restoration, we encourage you to apply. At S-BR, we believe in fostering a supportive and collaborative work environment where employees are encouraged to grow and develop their skills. We offer competitive compensation packages, including health, dental, and vision insurance, retirement plans with company matching, and paid time off plus holidays. Our culture is emphasized by volunteer opportunities, continuous learning, team bonding, and team building events. We are committed to diversity, inclusion, and ensuring that every team member feels valued and empowered to contribute to our shared success. Join us and be part of a dynamic team that values innovation, teamwork, and excellence in everything we do! We are proud members of leading organizations such as the International Concrete Repair Institute (ICRI), Post Tension Institute (PTI), Associated Builders and Contractors (ABC), and Construction Association of South Florida (CASF), reinforcing our commitment to industry standards, quality, and continuous improvement. We are unable to provide sponsorship at this time.

We are currently recruiting a contract Site Reliability Engineer for a 6-month contract located in Fort Lauderdale, FL. This is an on-site position within Information Technology and Services industry. Position offers a competitive rate. Experience required: 6 Years. Education level: Bachelor's degree. Must be local to Fort Lauderdale, FL geography. Please forward your updated resume for immediate consideration. Skills: SAP S/4HANA, R&D Engineering, Enterprise Portfolio & Project Management, Java, Site Reliability Engineering, incident management, root cause analysis Job Description Act as the primary point of contact for issue management, acknowledging and addressing emergency situations and high-severity incidents with speed and professionalism. Collaborate closely with technology teams, product owners, and other relevant stakeholders to investigate, analyze, and resolve issues effectively. Drive the resolution process end-to-end by handshaking with respective technology partners, ensuring accountability and clear progress towards closure. Provide periodic and structured updates on the status of issues to leadership and all relevant stakeholders, ensuring transparency and alignment. Provide periodic and structured updates on the status of issues to leadership and all relevant stakeholders, ensuring transparency and alignment. Coordinate across multiple teams and functions to facilitate solutions, remove roadblocks, and ensure timely incident resolution. Contribute to continuous improvement by identifying root causes and working with teams to prevent recurrence of critical issues. Need candidates who have at least 4+ years of experience in Java and open- source technologies. Problem-solving skills with a mindset for designing reliable, long-living solutions. Exceptional communication and stakeholder management skills, with the ability to collaborate with cross-functional teams, including developers, business analysts, and quality assurance professionals. Handling and troubleshooting day-to-day operations. Identifying problems or known errors and performing root cause analysis (RCA). Knowledge in Agile methodology.

Job Description Octagon Talent Solutions & ITRADE STEM is an organization dedicated to accelerating job growth and driving economic sustainability in the space, technology, energy, and manufacturing sectors. We manage comprehensive apprenticeship programs and foster strategic wealth creation, ensuring a prosperous future for businesses and the workforce alike. Our commitment to using advanced technology and maintaining long-term relationships makes us a leader in cultivating talent and innovation. We are seeking a seasoned professional to join our team as a Trainer of Manufacturing & Industry 4.0 in the Miami, Fort Lauderdale, and/or Palm Beach, FL areas. This role requires a blend of practical experience and academic expertise to effectively teach and mentor the next generation of manufacturing professionals. The ideal candidate will possess a deep understanding of CNC machining and Industry 4.0 technologies, alongside a passion for fostering strong relationships with students and local industries. Key Responsibilities: Instruction & Curriculum Development: Deliver high-quality instruction in Manufacturing & Industry 4.0, including CNC machining, automation, robotics, and digital manufacturing technologies. Develop, oversee and/or update curriculum to stay aligned with industry advancements. Student Engagement: Cultivate a dynamic learning environment that encourages student participation and success. Provide mentorship and career guidance to students, preparing them for roles in the manufacturing industry. Apprenticeship Programs: Design, implement, and/or oversee apprenticeship programs that reflect the cultural and operational needs of partnering companies in the South Florida area. Industry Partnerships: Establish and nurture strong relationships with local industries to facilitate on-the-job training opportunities and ensure alignment between academic programs and industry requirements. Program Management: Manage and coordinate academic programs, ensuring they meet educational standards and industry expectations. Participate in continuous improvement processes to enhance program effectiveness. Research & Development: Stay current with the latest trends and advancements in Industry 4.0. Engage in research activities that contribute to the field and support the academic community. Required Qualifications: Bachelor's degree or higher in Manufacturing Engineering, Industrial Technology, a related field; or equivalent practical experience in the manufacturing industry. Minimum of 5 years of practical experience in CNC machining and manufacturing processes for Industry 4.0. Strong knowledge of digital manufacturing technologies, automation, robotics, and/or data analytics in the context of Industry 4.0. Experience in establishing and maintaining partnerships with local industries for the purpose of providing apprenticeship and on-the-job training programs. Excellent communication and interpersonal skills, with the ability to engage and motivate students and industry professionals. Proficiency in English, both written and verbal, is required. Bilingual proficiency in English and Spanish is an asset. What We Offer: Competitive compensation. Opportunity to work with a dynamic team committed to driving economic sustainability and job growth. Access to cutting-edge technology and resources to support your professional development. A supportive environment that values innovation, collaboration, and continuous learning. --- At ITRADE STEM, we don't just envision a brighter future-we actively build it. Join us in our mission to shape the manufacturing leaders of tomorrow!

Manufacturing Engineer - Aerospace Innovation Shape the Future of Flight with Us Join a team where your ideas matter and your expertise drives progress. We're seeking a Manufacturing Engineer who's passionate about innovation and committed to excellence in aerospace manufacturing. In this role, you'll be at the forefront of optimizing production processes, reducing waste, and ensuring world-class quality standards while contributing to projects that redefine what's possible in aviation. Why You'll Love Working Here * Impactful Work: Every improvement you make helps deliver safer, more efficient aircraft to the skies. * Growth Opportunities: We invest in your development with training, certifications, and career advancement paths. * Collaborative Culture: Work alongside talented engineers and cross-functional teams who value creativity and problem-solving. * Innovation-Driven Environment: Your ideas for continuous improvement will be heard and implemented. What You'll Do * Lead Process Optimization: Analyze and enhance manufacturing workflows using lean principles and Six Sigma. * Drive Continuous Improvement: Champion Kaizen events and CI projects to boost efficiency and reduce costs. * Provide Technical Expertise: Support production lines, troubleshoot issues, and ensure compliance with AS9100 and NADCAP standards. * Manage Projects: From concept to implementation, oversee initiatives that deliver measurable ROI and operational excellence. What We're Looking For * Education: Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering (or related field). * Experience: 3+ years in aerospace manufacturing or a similar regulated industry. * Skills & Certifications: * Strong knowledge of lean manufacturing and Six Sigma (Green Belt or higher preferred). * Proficiency in CAD and process simulation tools. * Excellent problem-solving, analytical, and communication skills. * ASQ Six Sigma, Lean Practitioner, or equivalent certifications preferred. Ready to Take Off? If you're driven by innovation and thrive in a fast-paced environment, we'd love to have you on our team. Apply today and help us build the future of aerospace manufacturing. Job Type & Location This is a Contract to Hire position based out of Doral, FL. Pay and Benefits The pay range for this position is $45.00 - $55.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Doral,FL. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Immediately Hiring: Manufacturing Engineer Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing About Us: YouTube: Dayton-Granger, Inc. Our Website: daytongranger.com Full Time | Direct Hire | Excellent Benefits | Great Work-Life Balance Position Overview: Dayton-Granger, Inc. (DG) is a third-generation, family-owned aerospace manufacturer that has specialized in antennas, lightning protection systems, and electrostatic components for commercial and military aircraft worldwide for over 82 years. What makes DG unique is that engineering, testing, and manufacturing all happen under one roof, giving our teams direct visibility, fast collaboration, and real influence on the products we build. The Manufacturing Engineer will play a hands-on role in developing, improving, and supporting our production processes on flight-critical products. This is not a desk-only role - you'll be on the floor working closely with Engineering, Quality, Supply Chain, and Production to troubleshoot issues, refine workflows, create clear work instructions, and drive continuous improvement. If you enjoy solving problems, improving how work gets done, and seeing your ideas implemented quickly, this role offers real ownership and visibility in a collaborative, integrated manufacturing environment. Responsibilities: Design and create new process flow and work instructions with the correct process lead times, capacity analysis, and resources (machines and labor). Assist in the development and implementation of advanced production processes and tooling methodologies. Develop and execute engineering evaluation plans for experimental or analysis of new materials, new processes or new improvements. Resolve technical process problems of significant impact to performance, cost or schedule. Review, analyze and coordinate the implementation of methods and procedures to control and improve manufacturing processes. Assist in the implementation of Lean principles and technologies. Implement and maintain process FMEA (Failure mode and effect analysis) on all DG core processes in the effort to mitigate the risk of process failures and their severity. Maintain DG manufacturing best practice database and workmanship standard. Interpret company policies and maintain safety and quality standards. Perform additional tasks assigned by management Follows all DG safety procedures as per company policies and per the Facility Engineer/Safety Director Minimum Qualifications: Bachelor's Degree in Mechanical, Manufacturing, Aerospace, or related Engineering field 5+ years of experience as a Manufacturing Engineer in a production environment (not just exposure - must have owned/manipulated processes) Hands-on experience developing or improving manufacturing processes, work instructions, or tooling Practical experience supporting assembly or production floor activities, troubleshooting issues, and implementing process improvements Working knowledge of one or more manufacturing methods such as machining, composites, forming, joining, or assembly (does not need to be all) Strong analytical skills - able to collect data, identify root causes, and develop solutions Strong communication and cross-functional collaboration skills - able to work effectively with Engineering, Quality, Supply Chain, and Production teams Ability to manage multiple priorities in a fast-paced manufacturing environment English fluency (written & verbal) Preferred: Experience with FMEA, Lean, Six Sigma, or continuous improvement programs Experience in aerospace/defense or another regulated high-reliability manufacturing environment Benefits: Relocation Assistance Affordable comprehensive insurance coverage (Medical, Dental, Vision). 401(k) match with immediate vesting. Complimentary Life Insurance Coverage with Option for Supplemental Coverage. PTO and Paid Holidays. Short Term and Long Term Disability. Tuition Reimbursement. Mental Health Benefits. Complimentary basic life insurance Paid Parental Leave. Excellent work-life balance. Dynamic and collaborative work environment. Access to cutting-edge technology and resources. Length of Service/Milestone Anniversary Gifts. Team Building Activities. On-Site Gym. Why You'll Love Working Here: We are a multigenerational team with members representing a diversity of cultures, educational backgrounds, experience levels, and ideas all 'making it happen' from one location in beautiful, coastal South Florida. We are a well-established supplier providing cutting edge products in support of long-term aerospace programs, while at the same time developing new products to meet the needs of new customers, programs, and up-and-coming markets. Additionally, DG loves its employees! The average employee tenure is around 8 years. Length of service milestones are celebrated company-wide, and employees may make selections of anniversary gifts. Compliance Notice: Equal Opportunity Statement: Dayton-Granger, Inc. is an Equal Opportunity Employer. We welcome applications from all qualified individuals, including veterans and individuals with disabilities. Export Compliance Notice: This position requires access to information subject to the Export Administration Regulations (EAR) and/or the International Traffic in Arms Regulations (ITAR). Therefore, applicants must be U.S. persons as defined by these regulations. A U.S. person includes a U.S. citizen, U.S. permanent resident, or an individual who is otherwise protected under 8 U.S.C. 1324b(a)(3). Pre-Employment Requirements: Employment is contingent upon successful completion of a background check and drug screening, in compliance with company policy and applicable law.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities * Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). * Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. * Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. * Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. * Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. * Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. * Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. * Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. * Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. * Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. * Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. * Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. * Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. * Adhere to all employment policies/safety policies/practices required by law/established by Company. * Wear all necessary Personal Protective Equipment as always directed by Company. * Immediately report any maintenance and/or safety issues to supervisor. * Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. * Actively participate and support the 5S process by maintaining a clean workstation and department. * Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. * 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). * 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). * Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). * Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. * Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. * Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. * Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). * Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. * Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. * Knowledge of Lean Manufacturing principles is highly desirable. * General computer skills and familiarity with Microsoft Office Suite preferred. * General mechanical ability is preferred. * Knowledge of and experience with hand tools * Adhere to essential functions of position such as attendance and timeliness. * Ability to accept and follow directions.

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a highly skilled Propulsion Manufacturing Engineer to support the design, assembly, integration, and testing of electric propulsion thrusters for Low Earth Orbit (LEO) satellite applications. The ideal candidate will have hands-on experience with propulsion system hardware, electrical and plasma thrusters, and production line processes to ensure reliable, repeatable, and high-quality manufacturing. Key Responsibilities Develop and maintain manufacturing processes for electric propulsion thrusters and subsystems, including assembly, bonding, welding, and integration. Support production line setup, tooling design, and workflow optimization to improve yield, cycle time, and throughput. Collaborate with design engineers to ensure manufacturability of propulsion system components and assemblies. Define and implement quality control procedures including ESD protection, contamination control, vacuum compatibility, and leak testing. Support the assembly, integration, and verification (AIV) of propulsion modules, including electrical connections, harness routing, and fluid/electrical interfaces. Troubleshoot and resolve issues related to plasma thrusters, ion engines, Hall-effect thrusters, and PPU integration. Conduct DFM/DFX reviews to enhance reliability and manufacturability. Develop detailed work instructions, assembly documentation, and test procedures for technicians and operators. Participate in qualification and acceptance testing, including vibration, thermal vacuum (TVAC), and functional testing of thruster subsystems. Drive continuous improvement initiatives for cost reduction, process automation, and scalability for satellite constellations. Qualifications Bachelor's or Master's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field. Hands-on experience with electric propulsion systems (Hall thrusters, ion thrusters, or similar plasma propulsion technologies). Familiarity with vacuum chamber operations, leak detection methods, and contamination control. Experience with satellite manufacturing standards (ECSS, NASA, IPC, or equivalent). Strong knowledge of electrical integration, power processing units (PPUs), and harnessing in propulsion systems. Proficiency in CAD software (CATIA, NX, SolidWorks, or similar) for design-for-manufacturing activities. Knowledge of manufacturing processes such as precision machining, brazing, welding, additive manufacturing, and surface treatments. Strong problem-solving, documentation, and cross-disciplinary collaboration skills. Experience in cleanroom and ESD-controlled environments is highly desirable. Preferred Skills Previous experience in LEO satellite propulsion integration. Familiarity with thruster lifetime testing and endurance campaigns. Understanding of propellant systems (Xenon, Krypton, or alternative propellants). Knowledge of automation and digital manufacturing tools. This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands . AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

FHP Manufacturing, located in Fort Lauderdale, Florida, is a joint venture between Robert Bosch (BOSCH Group) and Carrier Corporation. FHP Manufacturing is a leader in the production of geothermal and water source heat pumps, providing some of the most efficient heating and cooling comfort solutions in the industry. Job Description First escalation point of contact for testing and programming operations: Leak Test, Final Run Test, Motor Programming, and Controller Programming Communicate efficiently with end of line test associates to provide them with quick support to guarantee daily production targets Support proper operation and maintenance of testing and programming equipment on all assembly and support lines Assure accessories used for testing operation are available for immediate replacement if necessary: Thermocouples, control cables, power plugs ... Troubleshoot failures of heat pumps and test equipment to locate root cause and provide resolution Report issues and findings using the FPY report. Drive improvements using basic problem-solving techniques Train or assist in training operators of run off stations to ensure tests are being properly performed, help to identify and resolve improvement opportunities and gaps with training Validate troubleshooting information shown by Testbuilder 3.0 after any failure occurs is accurate and update work instructions and sequence cards as needed Create and update work instructions to reflect current procedures in testing and validate improvement ideas with the test engineer Recognize deficiencies in the test process and find options for improvement together with test engineer. Other Workplace Considerations: Must be flexible - changing work shifts (days and / or hours) as required. Qualifications Bachelor's degree in Mechanical or Electrical engineering, or Computer Science 3+ years of manufacturing and/or engineering experience. 3+ years of experience working in a team environment. Additional Information Manufacturing/Engineering internship experience. Ability to use piping schematics, electrical wiring diagrams and work instructions to assure 100% unit compliance with quality standards and engineering design. Leadership / technical background - leading groups and delegating tasks. Effective problem-solving skills using proven problem-solving methods. Good written and oral communication skills. Strong project management / planning abilities. Good understanding of effective use of manufacturing personnel and equipment. Solid Project planning and project management skills. Ability to coordinate and manage multiple tasks simultaneously. Demonstrated experience in product launch and related quality requirements. Must have demonstrated a high level of teamwork, initiative, and involvement in previous work assignments. Demonstrates discipline and consistency regarding adherence to established standards, policies, and procedures. Ability to read and apply work instructions, follow directions, understand and execute safety and quality procedures. Must be able to speak, read and write English. All your information will be kept confidential according to EEO guidelines. Equal Opportunity Employer, including disability / veterans.

Job Details Pompano Beach Main Building - POMPANO BEACH, FL $20.00 - $20.00 HourlyDescription At The Shade Store We have handcrafted the finest Shades, Blinds and Drapery for 75 years. We believe designing beautiful custom window treatments should be an effortless experience, so we offer outstanding services to help our customers every step of the way, from inspiration to installation. We are always looking for friendly, passionate people to help us deliver the finest custom window treatment experience to our customers. Our team is growing and expanding, and there has never been a more exciting time to be part of it. THE POSITION: Safety Intern The Safety Intern plays a critical leadership role in fostering a proactive and data-driven safety culture within the organization. The Safety Intern is responsible for driving continuous improvement across all safety programs, guiding compliance with OSHA and company standards, and supporting the development and implementation of site-wide risk reduction strategies. This role requires a collaborative leader who can communicate effectively with cross-functional departments, influence change, and integrate safety into all levels of operations. This position is based in the manufacturing workroom and requires a hands-on approach to safety. The ability to respond quickly to incidents or inspections, lead in dynamic environments, and support frontline teams is essential. Essential Job Functions of the position may include: Work in conjunction with Safety Director on safety projects. Analyze safety performance data using Safety Culture and other tools to identify patterns, trends, and recurring hazards. Create and present interactive safety dashboards to workroom production leadership teams, including KPIs, incident trends, and training metrics. Translate safety data insights into training materials, awareness campaigns, and targeted corrective actions. Develop training modules for the leadership team, as well as the onboarding process, into safety culture for each safety policy. Develop and execute data-driven initiatives aimed at prevention of injury and continuous improvement of safety culture. Support incident investigations, lead root cause analyses, and ensure corrective actions are tracked to closure. Oversee and ensure consistency in Job Hazard Analyses (JHAs), Standard Operating Procedures (SOPs), and risk assessments; support periodic reviews to align with operational changes. Conduct facility walkthroughs and safety inspections at scheduled intervals, report findings to department supervisors and managers. Coordinate company-wide drills, including fire and emergency evacuation exercises. Review and approve safety communications including briefings, campaigns, and toolbox talks. Conduct safety training for new hires (onboarding) and existing employees when Safety Leads are unavailable. Monitor the safety training matrix; collaborate with leads and production managers to ensure 100% compliance. Participate in Gemba Walks and weekly stand-up meetings with safety lead; provide updates on safety implementation and collect feedback. Participate in the Site Health and Safety Committee. Stay current with regulatory updates and industry best practices; recommend improvements and evaluate new safety technologies. Demonstrate professionalism and leadership through respectful communication and a positive, assertive tone. Lead by example in promoting a proactive safety culture. Perform other duties as assigned. Qualifications: Currently a student of an associate or bachelor's degree in occupational safety, Environmental Health, or related. OSHA 30 Certification required (company may provide). Proficiency in data analysis tools, such as Microsoft Excel (pivot tables, formulas), Power BI or Tableau is strongly preferred. Strong understanding of OSHA standards and manufacturing safety practices. Bilingual (English/Spanish) required. Ability to lead and influence others, foster accountability, and engage across multiple departments. Strong verbal and written communication skills, including public speaking and presentation experience. High attention to detail, with ability to interpret trends and translate data into actionable plans. Must be able to work flexible schedules and weekends if required. Ability to walk, stand, and conduct inspections for extended periods; able to lift up to 25 pounds. THE SHADE STORE offer is contingent upon: Proof of legal authorization to work in the United States for The Shade Store, which will be confirmed by E-Verify within three business days of your hire date. The Shade Store provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

12 month contract Pay Range: $30-36.50 Manufacturing Engineer (Onsite): In this role, the candidate will design and develop manufacturing processes for products, taking in consideration problems inherent in the aftermarket production. Such design and development may include existing or revised processes. The candidate will also develop procedures for the economical production, repair, and overhaul in cooperation with MRO plant and production departments. In addition, the candidate will conduct tests and measurements throughout stages of production to determine control over applicable variables; and services, troubleshoots and solves production process problems with processes or equipment already in operation. The responsibility includes the troubleshooting and maintenance of testing equipment (electrical, hydraulic, electronic controls, and software). Previous work experience troubleshooting and maintaining testing equipment. CAD modeling experience preferred. What The Candidate Will Do: * Define optimum LRU configuration * Define optimum workscope and build standard for existing products * Review failure data, cost, and parts usage, across the repair site * Make decisions and recommendations based on this data review * Provide in-house advocacy for newly developed parts repairs/processes approval by Service Engineering and Collins Miramar Management. * Analyze removal causes and develop corrective actions * Optimize on-wing life for LRU by review of CMM and SAP data * Review shop visit data and provide recommendations to optimize the shop visit rate for LRU * Work with Service Engineering to develop new product workscopes based on data * Work in a team environment with Service Engineering, Program Engineering, Repair Engineering, FlightSense Technical Advisors, and Miramar Repair shop to optimize product reliability, maximize economical parts usage, and maintain high levels of customer satisfaction * Provide status to Management and Miramar Site Teams of top cost reduction initiatives in process * Maintain proficiency in assigned SAP products * Review shop and testing practices * Issue repair shop troubleshooting recommendations * Review receiving inspection and provides test verification recommendations * Provide recommendations for parts scrap, reuse, replacement, rework, and repair determination * Review component repair work * Perform failure and test reject analysis * Develop and reviews parts rework and repair procedures * Track, review, and analyze unit reliability * Provide shop training as required. Provides initial and recurrent shop technical and process flow training as required * Provide quality, product, and reliability improvement recommendations to the Engineering Manager * Optimize shop parts usage versus component reliability to assure Miramar repair site goals are met * Coordinate overall product line (Miramar repair shop) issues as required * Participate as a member of the implementation team for new product or customer programs * Perform and maintain active role in Financial Analysis of programs and implementation of corrective actions where required to achieve established program financial goals * Develop and maintains proficiency in the computer software required to perform the job functions. * Provide technical support to the Quality department and to the Quality Manager, regarding compliance issues * Provide technical support to the EH&S department regarding issues related to the environment, health, and safety * CAD modelling experience is preferred US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

DO YOU WANT To spearhead CNC process development for precision manufacturing? To specialize in glass and glazing with your CNC expertise? To lead process improvements, cutting costs and enhancing productivity? To innovate with new tools and products for competitive advantage? To shape equipment acquisitions for enhanced manufacturing capabilities? To streamline team operations through efficient data management for automation? DO YOU HAVE WHAT IT TAKES? Experience in the glass and glazing industry is a must, but knowledge of aluminum material and fabrication would be valuable as well. Associate degree in a related field. Or experience with related training/certification (e.g., Tool & Die, Machinist, or NIMS certification Must possess extensive CNC machining process and programming knowledge. Knowledge of Good Manufacturing Practices and ISO standards is a plus. Working knowledge of online project management systems preferred. Experience leading and training others helpful. Must have good verbal and written communication skills, be team and customer-focused, and have good interpersonal skills. YOU WOULD BE RESPONSIBLE FOR Develop, train, and provide technical support to less experienced CNC Operators. Responsible for quick turnaround support and manufacture of architectural metal products. Develop machining processes and programs for the manufacturing of products in multiple-axis machining centers interfacing with the Director/Manager along with production personnel. Analyze part drawings, sketches, and design data to determine dimension and configuration of cuts, selecting cutting tools, and machine speeds and feeds, according to knowledge of machine shop processes. Perform debugging and testing of CNC programs in the machining centers. Collaborate and advise the design team on design for manufacturability. Develop and maintain CNC programs of multiple-axis machining centers using an advanced three-dimensional programming CAD/CAM system. Write instruction sheets and tool lists to guide the set-up and operation of the machining centers. Aid in the training of production operators on the use of new CNC machine control and tools. ABOUT THE COMPANY A commercial specialty contractor that fabricates and installs high-performance pre-glazed curtain wall systems and provides a full range of window and door systems for commercial and residential construction. COMPENSATION Competitive compensation package commensurate with experience. Comprehensive benefits package to include health, dental and vision insurance, 401(k) and paid time off (PTO). ABOUT FLCC At FLCC, we know it can be difficult to manage your career when you are immersed in your daily activities. Our trademarked Career Coaching and Matchmaking process, the Breistol Method , helps construction management professionals like you, go from passenger to pilot of your career. ARE YOU WHO WE ARE LOOKING FOR? APPLY NOW! CALL OR TEXT US ************

The Process Engineer II is responsible for ensuring the organization is compliant with all applicable regulations and standards in the areas of process validations. In addition, this position leads process change and improvement throughout the different areas of the company, including manufacturing. Process Engineers also participate in technology transfer to ensure the processes necessary for new products are effectively translated to the manufacturing floor. The Process Engineer II makes use of statistical analysis methods, critical thinking, process development, and scaling principles to achieve the objectives mentioned above. Requirements Duties and responsibilities Provide backup support to the Director Research and Development Operations, as needed. Perform critical review of Process Engineer I project plans and related documents to ensure implementation is accurate and timely. Independently lead and coordinate cross-functional projects and related resources to ensure completion in a timely manner. Communicate to management of performance against plan. Perform data and technical presentation reviews as needed. Understand and apply the applicable regulations and standards for equipment qualification and process validation to ensure compliance. Statistical and analytical methods to understand processes. Use LEAN Manufacturing principles to analyze and make recommendations for process optimization and implementation. Work with other department heads or designees on projects as delineated on project plans to ensure timely completion of projects. Develop equipment and process validation protocols (IQ, OQ, PQ) and reports as needed. Lead and perform equipment qualifications and process validations as needed. Develop and monitor process and equipment metrics to use for optimization analysis. Develop and implement solutions with minimal supervision. Comply with FDA and AATB tissue banking standards. Other duties as assigned. Qualifications BS in Biomedical, Mechanical, Industrial Engineering or other applicable engineering discipline. Advanced degree (Master's) a plus. A minimum of 3 years of experience in Tissue Banking, Device, Biologics, or pharmaceutical industry in a relevant engineering role. Leadership experience preferred. Strong analytical, planning, project management, critical thinking, troubleshooting, and problem-solving skills. Ability to effectively communicate with multidisciplinary teams. Excellent technical skills and writing. Strong knowledge of LEAN manufacturing principles preferred. Strong knowledge of 21CFR 1271 regulations and AATB guidelines. Highly proficient in project planning software. Microsoft Project preferred. CTBS certified (or certified within two years of employment). Strong work ethics. Working conditions Job requires working in office. Must be willing to work weekends and evening hours, as necessary. Must be willing to accommodate travel, if necessary. The job may require work to be performed inside the controlled clean room processing area where the engineer would be exposed to tissue processing. Physical requirements Job is one where the incumbent is required to stand for extended periods of time, lift heavy objects, and do repetitive tasks with few breaks while executing engineering plans. Direct reports Intern Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation, and training. Vivex Biologics complies with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Job DescriptionDescription: Who is Costa Farms? We're one of the world's largest horticultural growers-but without an ego to match our acreage. Our headquarters are in Miami, Florida, where we were founded in 1961. Costa Farms started on just 30 acres, and over the last 60 years, we've grown to more than 5,000 acres around the world. We have farms in North and South Carolina, Central and South Florida, and the Dominican Republic, plus an office in China. Costa Farms now employs nearly 6,000 people: engineers, marketers, accountants/analysts, human resources professionals, and of course, growers and plant scientists! Here at Costa Farms, we live by the values of H3: being Humble, staying Hungry, and always Hustling. The team rallies to the mission of being a lean, green, growing machine dedicated to enriching the world by bringing plants into everyone's life. True to that mission, we grow more than 1,500 plant varieties. Driven by the spirit of innovation, the team is always testing new plants and developing new solutions to make it easier for retailers and plant parents to enjoy plants. We're also continuously testing different ways of growing our plants to increase quality and improve their ecological footprint as one aspect of our many sustainability efforts. We cultivate plants, as well as a winning culture. Join the team, and you'll find opportunities to learn and grow. You'll collaborate with other driven, determined people who together keep Costa Farms an industry leader. You'll support and be supported by a team that cares about each other, our customers, our consumers, and our community. You'll also find right away that Costa Farms is committed to providing a diverse environment. We're proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetic information, disability, age, military status, marital status or veteran status, or any other group status protected by federal, state, or local law. DESCRIPTION: The Process Engineer is responsible for leading the optimization and implementation of projects designed to increase productivity and effectiveness. The successful candidate will be able to enhance business processes to maintain efficiency, reduce costs, enhance sustainability, and maximize profitability. Developing best practices and fostering sustainable cultural change. This position will be exposed to all areas of our business and manufacturing operations. Requirements: RESPONSIBILITIES: Optimize and document manufacturing processes through the entire supply chain. These business processes include procurement to payables, production operations, inventory management, and shipping Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs, and changeovers. Interact with supervisors and workers to explore initiatives, ideas, and order progress. Develop innovative solutions. Research and purchase new manufacturing technology. Prepare samples for study. Improve process capability and production volume while maintaining and improving quality standards. Develop best practices to deliver process documentation using appropriate tools (web apps, apps, MS Tools, or through integration with ERP, etc.) Ensure that process documentation is user-friendly and accessible in English and Spanish. Support shipping operations on/off-season to ensure order completion Evaluate and improve processes in manufacturing systems. Develop and implement systems that optimize all phases of the production process. Work with equipment designers and manufacturing officers to develop a cost-effective and working production process. Ensure projects are completed on time. Ensure financial budgets are followed. Collect, record, and transcribe data. Work with the compliance team to ensure business processes are being adhered to. Manage cost and time constraints Perform risk assessments Additional Responsibilities Availability for flexible schedule changes based on business needs (including but not limited to seasonal demand and additional hours outside of the regular work schedule). Collaborate with cross-functional teams to gather information or help as required. Perform additional duties as required. QUALIFICATIONS: Bachelor's degree in engineering with a specialization in Industrial or Mechanical Engineering or equivalent experience. Experience in process improvement and project management is a plus. Strong understanding of manufacturing methods /procedures/ quality. Proficient in Microsoft Office Suite. (Excel, Visio, Power BI) Experience in process simulation Working knowledge of process engineering software packages Ability to present technical information using CAD, CAD/CAM Circuit Design Bilingual (English - Spanish) is a plus. Excellent written and verbal communication skills, with the ability to present complex data to diverse audiences. Physical Demands Exerting up to 20 pounds of force frequently and/or 50 pounds of force occasionally to lift, carry, push, pull, or otherwise move objects, Bending, reaching, stretching, standing, & walking in various settings or environments. Work Environment: The role involves utilizing standard office equipment, such as computers, monitors, keyboards, mice, telephones, and other essential digital tools required for daily tasks. Must be able to work in and around various settings, including office and outdoor agricultural facilities. Indoor duties may involve using computers and standard office equipment. Outdoor duties include work outdoors in fluctuating weather conditions, including exposure to sunlight, rain, wind, and temperature changes (hot, cold, rainy, windy). Tasks often involve manual labor or physical effort. The position also requires direct contact with various plants, soil, and shipping materials and exposure to various dust, noise, and weather conditions. SKILLS: Excellent communication and interpersonal skills with the ability to effectively communicate complex information to employees. Demonstrated ability to work well in a team-oriented environment. Superior organizational, self-motivation and problem-solving skills Ability to maintain confidentiality and handle sensitive information with discretion. Strong analytical and critical thinking abilities. Capable of identifying problems, evaluating options, and implementing practical solutions. Effective time management skills to complete tasks within deadlines and maintain productivity. Ability to work independently as well as collaboratively within a team environment. Ability to troubleshoot and resolve issues efficiently. Flexibility to adapt to changing priorities and work schedules as needed. COMPETENCIES: Action Oriented Collaborates Tech Savvy Cultivate Innovation All applicants must be work-authorized. Costa Farms will not sponsor any visa for this position. After applying, follow us on LinkedIn to stay up to date on what's happening around Costa Farms and to start becoming part of our family. Come Grow with Us™! Costa Farms offers competitive wages and benefits, including: 401(k) Plan Company 401(k) Matching Contributions Health Savings Account, Flexible Spending Account, and Dependent Care Telemedicine/ Mental Health Services Health Insurance Dental Insurance Vision Insurance Pet Insurance Supplemental Insurance (Aflac) Growth Opportunities Challenging and exciting work environment Costa Farms Scholarship Employee discounts on plants Costa Farms headquarters also has: On-site gym with showers Subsidized on-site cafeteria, a quiet room, and indoor games Love Where You Work activities throughout the year This organization participates in E-Verify

Structural-Builders and Restorations (S-BR) is seeking a dedicated Project Engineer to join us. This role provides critical support to Superintendents and Project Managers in various aspects of fieldwork, procurement, reporting, and contract management. The ideal candidate will be proactive, detail-oriented, and skilled in communication, helping ensure each project runs smoothly from start to finish. Responsibilities: Assist in fieldwork coordination and provide day-to-day support to Superintendents and Project Managers. Manage procurement processes, including materials and equipment acquisition. Prepare detailed reports, pay applications, subcontracts, and other project documentation. Coordinate with various trades and maintain open communication across project teams. Ensure compliance with project plans, shop drawings, and specifications. Contribute to project problem-solving and maintain efficiency under pressure. Qualifications: Bachelor's degree in Construction or Civil Engineering, Project Management, or related field OR graduation set for upcoming semester. In-depth understanding of construction procedures, building systems, and tools. Proven ability to interpret plans, shop drawings, and project specifications. Strong math and computer skills, with proficiency in MS Office, Bluebeam, and On-Screen Takeoff. Excellent verbal and written communication skills, with the ability to interact effectively with workers, trades, and project stakeholders. Ability to prioritize tasks, meet deadlines, and adapt to a fast-paced work environment. If you are a results-driven engineer with a passion for construction and restoration, we encourage you to apply. At S-BR, we believe in fostering a supportive and collaborative work environment where employees are encouraged to grow and develop their skills. We offer competitive compensation packages, including health, dental, and vision insurance, retirement plans with company matching, and paid time off plus holidays. Our culture is emphasized by volunteer opportunities, continuous learning, team bonding, and team building events. We are committed to diversity, inclusion, and ensuring that every team member feels valued and empowered to contribute to our shared success. Join us and be part of a dynamic team that values innovation, teamwork, and excellence in everything we do! We are proud members of leading organizations such as the International Concrete Repair Institute (ICRI), Post Tension Institute (PTI), Associated Builders and Contractors (ABC), and Construction Association of South Florida (CASF), reinforcing our commitment to industry standards, quality, and continuous improvement. We are unable to provide sponsorship at this time.