Manufacturing engineer jobs in Missoula, MT - 150 jobs

Internship Description Montana Precision Products - Where Precision Meets Innovation! Montana Precision Products (MPP) is at the forefront of manufacturing excellence, specializing in producing complex and high-precision components for the aerospace and industrial sectors. At MPP, you'll be part of a team that uses state-of-the-art technology to create components that power some of the most recognizable aircraft in the world, including the Boeing 737 MAX, the Airbus A320neo, and other commercial aircraft. Job Summary: Provide Engineering technical support. Assist Engineering in process, product, tooling development and maintenance. Supports continuous improvement using Six Sigma tools/skills and by planning/leading and participating in action workouts. Team with Operations and Material Flow to optimize business results including manufacturing cost, inventory, and turn-time reductions. Write and maintain Manufacturing and Quality Control Work Instructions to comply with MTPP policies and customer standards. Interface with Design, Product Support Engineering, and Quality in support of business objectives. Assist in the MRB disposition of nonconforming product and development of Rework tickets. Assist with Completes these and other job duties, as instructed. Duties and Responsibilities: Reads, interprets, prepares, and/or revises blueprints; schematics; drawings; CAD models; manufacturing, inspection, and other technical specifications and applies them within manufacturing and quality processes. Assesses customer and regulatory requirements for incorporation into work instructions and other manufacturing planning Researches tooling design, equipment capabilities, and manufacturing processes to determine a best fit solution for new product development and process improvements. Assists with process set-up for new product as well as cost and losses reductions on assigned existing product and processes. Analyzes problems with processes and product, provides input for decisions on proper actions to be taken for correction. Executes solutions effectively. May prepare and present First Article Inspection reports and any other necessary product or process review and reporting. Interacts with customers and suppliers on technical and program matters. Manages personal timetables and project status for various and concurrent projects to assure milestones and completion dates are achieved. Assists in planning and coordination within the associated manufacturing area. Supports process reviews, revisions, and training on necessary changes within areas of responsibility. Schedule: We are flexible with student schedules during the hours of 6am-6pm. Interns are expected to work 15-20 hours per week during school semesters. Full time employment is available during breaks. Interns are also eligible to participate in our company 401 (k) plan Work Environment: Shared office environment for administrative work. Frequent access to manufacturing environment is required to perform duties adequately. May be exposed to noise, dust, fumes, airborne particles, smoke (Not over OSHA Permissible Exposure Levels). Safety training and equipment are provided by MPP in accordance with applicable law, industry standards and company policy. Requirements Successful completion of 2 years education in pursuit of engineering degree CAD experience or the capability to analyze geometry through the use of CAD programs. Ability to read, interpret, and apply engineering drawings, specifications, and industry standards. Proficiency with Microsoft Office programs (Excel, Word, Access, Power Point, etc.). Ability to read/write/speak English US Person Status Ability to pass pre-employment criminal background check and drug screen Desired Characteristics: Strong interpersonal and communication skills Experience in similar industrial or manufacturing environment Strong interest and desire in manufacturing technologies and materials, specifically aerospace Makes decisions based on experience and available data Highly self-motivated with extreme attention to detail Ability to work with multi-disciplinary teams Employment Eligibility: This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to U.S. export-controlled technology. Montana Precision Products will require proof of status prior to employment. Equal Opportunity Employer: Montana Precision Products is an Equal Opportunities Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Salary Description $20.00/hr -$23.00/hr

Job Description Luna Innovations is the global leader in fiber optic sensing focused on solving some of the world's most complex measurement challenges across multiple industries. We are looking for a Signal Processing Engineer to join our team based in Missoula, MT. This position emphasizes signal processing (primarily focused on acoustic data), strong mechanical aptitude, and an interest in hands-on, practical work. While programming experience is highly valued, we welcome candidates who are new to computer programming but eager to learn and grow in this area. The Role Reporting to Senior Signal Processing Engineer, you will be responsible for (but not limited to) the following: Assisting in development of Silixa's FiberWrap flow metering application with an emphasis on data processing and system integration, including theoretical, hardware, and software components. Applying signal processing techniques to data acoustic data obtained from Silixa's industry-leading iDASTM and Carina distributed acoustic sensing (DAS) systems. Contributing to the ongoing development of Silixa products offered in the market areas of alternative energy (e.g., carbon, capture, utilization and storage; geothermal), oil/gas, and defense Participating in hands-on experimental work, including system setup, fiber installation, and equipment troubleshooting. Collaborating with team members to support data processing, hardware configuration, and technical proposal development. Learning and adhering to health, safety, and environmental (HSE) practices while actively promoting safe work practices. The Candidate The ideal candidate will have foundational knowledge in signal processing, a strong mechanical aptitude, and a willingness to learn programming skills as needed. We are looking for a motivated individual eager to grow within a multidisciplinary team while contributing to innovative projects in signal processing and acoustic data analysis. The ability to work with advanced distributed sensing systems and a willingness to travel occasionally to experimental and client sites is essential. Qualifications/Experience BS in engineering, computer science, applied mathematics, physics, or related fields with a focus on signal processing, data analysis, or mechanical systems. Preferred MS (or equivalent) in engineering, computer science, applied mathematics, physics, or related disciplines with expertise in signal processing or system modeling. Basic understanding of acoustic data processing or distributed sensing systems. Familiarity with Python or other programming tools (e.g., MATLAB, C). Demonstrable problem solving and analysis ability (examples and/or portfolio encouraged!) Fluent in English Work with colleagues across all business functions both internally and with clients (commercial, production, operations, support, R&D) Additionally, the candidate must have Excellent written and verbal communication skills, with the ability to create detailed technical reports and presentations. Strong collaboration skills, capable of working with cross-functional teams and clients across technical and commercial domains. A hands-on, practical approach to problem-solving, with a willingness to “get your hands dirty” as needed. Commitment to occasional travel for on-site experiments and client interactions. Physical Requirements & Work Environment Very occasionally required to lift, carry, or move materials weighing up to 25 lbs; heavier items may require assistance. May require occasional bending, reaching, or kneeling when accessing files, materials, or interacting with production floor personnel. Primarily office-based work. Work environment includes exposure to controlled temperature and humidity. Occasional exposure to moderate noise levels and bright lighting from nearby machinery or equipment. Luna is an Equal Employment Opportunity Employer - Luna provides equal employment opportunities to all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, sexual orientation, marital status, religion, age, disability, gender identity, results of genetic testing, or service in the military or any other characteristic. Equal employment opportunity applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Luna expressly prohibits any form of unlawful employee harassment or discrimination based on any of the characteristics mentioned above.

Applicants must be authorized to work in the U.S.; Sponsorship is not available for this position at this time.” Your Role on Our Team: The Manufacturing Engineer is responsible for providing production support as well as managing multiple moderate to highly complex projects. Individuals in this position will provide project management and necessary technical direction to assure successful and timely production concerns/issues resolved. You'll be DISRUPTIVE through these duties and responsibilities: Support production operations through troubleshooting problems, supporting maintenance, and ensuring equipment is in control. Work on continuous improvement projects to increase productivity, including any skills as related to project management and vendor relationships. Statistical process control to define problems and present quick applicable solutions to key stakeholders to implement change. Create and update operational method sheets (OMS) and related documentation and ensure they are current, accurate and understood by the team. Understanding of manufacturing quality systems and how to implement corrective actions and 8D's. Lead projects by working with cross functional resources to develop and implement new manufacturing processes and automated solutions for Service Operations Ability to conceptualize and work with integrators to develop solutions for manufacturing processes. Compile information and data to utilize in determining a business case for manufacturing operations. Responsible for the completion of assigned operations projects within budgetary and scheduling guidelines. Tracks project schedule to ensure adherence to timelines. Consistently visualizes entire scope of a project with minimal guidance. Identify project risks and implement risk reduction plans. Participate in Kaizen and project engineering within the facility. The TOOLS you'll bring with you: Bachelor of Science Degree in Mechanical or Industrial Engineering. Master's Degree preferred. Minimum 3+ years experience in manufacturing processes. Supervisory experience helpful. Proficient in Microsoft office platforms (Excel, PowerPoint, Word, PowerBI, etc) Proficient in Microsoft Visio/Lucid flow charts Proficient in AutoCad Ability to create Standard work, layered process audits, time observations/line balancing Experience successfully managing medium-high complexity projects Must possess a high level of Operations aptitude Excellent problem-identification and resolution skills Ability to work hands-on with the equipment if needed Statistical data analysis, risk analysis, flow layout and other related engineering tools Must have excellent verbal and written communication, organizational, time management and interpersonal skills. Must have high level of self-initiative and have proven “start-to-finish” project management skills. Computer knowledge and skills required. We provide these great perks and benefits: Robust health, dental and vision insurance plans Generous 401 (K) savings plan Education assistance On-site fitness center And many more, check out our benefits site HERE. Milwaukee Tool is an equal opportunity employer.

Job Title: Product Engineer Job Category: Full-Time Employee Team: Product & Engineering Headquarter Location: Missoula, MT Salary: Competitive, based on experience Who We're Looking For We're looking for a builder - a curious, motivated, product-oriented engineer who loves crafting practical, scalable software that delivers real-world value. You'll join a lean, fast-moving team at Yonder (a TOMIS company), where AI meets adventure. Our platform powers chat automation, digital marketing, and customer engagement tools for tour operators and outdoor experience brands around the world. We're scaling fast, and we need someone who can own the full stack - from backend architecture to frontend UX - and thrive in the wild terrain of a high-growth SaaS company. If you get excited about building software solutions end-to-end, AI integration, and shipping features that make customers say “damn, that's slick,” this might be your new favorite job. Role & Responsibilities Own new and existing features end-to-end. This includes understanding the user pain points, identifying a technical solution, designing, building, documenting, testing, supporting and educating. Creating internal reporting tools to monitor performance of the application and insight into customer usage. Continuously learn and adapt - AI mastery is a must. We use Cursor, but if you find another flow that works for you, that's just fine! Work with third-party platforms to build and maintain integrations. This may include emails, meetings, etc. It should go without saying, but we DO care about code quality! Your code should always keep future objectives and developers in mind. Contribute to product strategy, helping prioritize engineering work that moves the business forward. Occasional customer support. Qualifications & Requirements 3+ years of professional full-stack development experience, ideally within a startup environment or SaaS company. Strong proficiency with React, especially prior to v18. Significant Python and/or PHP experience (Laravel, Django, Flask). Experience with both SQL and non-SQL databases. We use MySQL, Postgres, and MongoDB. Familiarity with cloud platforms (AWS, GCP, or similar), Docker, CI/CD pipelines, and microservices architecture. You have opinions when it comes to structuring internal APIs for a React frontend. You are comfortable working in ambiguity. You can take loosely scoped User Stories and turn them into a feature that delights users. Strong problem-solving skills and a bias toward action - you don't wait to be told what's broken; you find and fix it. Bonus Points: Experience with AI integrations (OpenAI, vector databases, LangChain, etc.) Experience with messaging or communications platforms (Gmail API, Twilio, WhatsApp Business, etc.) Familiarity with analytics tools (PostHog, Segment, or similar). Why Yonder We're not building software in a vacuum - we're shaping how adventure operators connect with the world. Yonder is the SaaS spin-off of TOMIS, a Montana-based leader in marketing tech for tours and activities. You'll work alongside a small team of ambitious humans (and a few dogs) who value autonomy, curiosity, and creating meaningful impact. We believe in AI-driven innovation, honest work, and good energy - and we're just getting started. Physical Working Conditions: The following physical requirements represent those that are required to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting - [90%] Standing - [5%] Walking - [5%] Bending - [Occasionally] Kneeling - [Some] Lifting - [Up to 25 pounds] Reaching - [Regularly] Telephone Use - [Yes] Computer Use/Manual Dexterity - Yes Ability to travel - [10%] What We Offer You: Competitive salary, unlimited PTO, and opportunities for growth Company health insurance & dental plans Matching 401K Plan Amazing outdoor industry discounts Monthly wellness stipends, professional development stipends, & paid client visits Powder day ski policy Downtown Missoula office Remote-friendly, hybrid workplace option Dog-friendly office Culture: collaborative environment, continuous learning opportunities, community involvement, networking opportunities, work hard play hard, conference travels, team holiday & spontaneous functions APPLICATION: Video Cover Letter Required Candidates must submit a short video cover letter as part of their application. In your video, please touch on: Your business and product experience Why you're interested in TOMIS + Yonder and what excites you about our mission The skills and experience that make you a strong fit for this role (similar to what you'd include in a written cover letter) Any recent project or accomplishment you're proud of We recommend keeping it around 2-3 minutes Bonus: Find and connect with our CTO, Austin Lords, on LinkedIn - he loves meeting curious engineers who are passionate about building meaningful products. Position open until filled TOMIS is an Equal Opportunity Employer

About the Role: The Senior Electromechanical Engineer is a senior level engineering role responsible for designing, developing, and integrating advanced electromechanical systems and components for industrial products. This position leads complex product development efforts from concept through commercialization, with a strong emphasis on system integration, design for manufacturing, and technical leadership. The role is ideal for an experienced engineer who thrives in a fast paced, innovation driven environment and enjoys solving technically challenging problems. Responsibilities: Lead electromechanical design projects from concept, requirements definition, and analysis through prototyping and production release. Take ownership of assigned projects from inception to completion, ensuring technical quality and on time delivery. Develop project requirements to resolve product and process challenges and support new product development initiatives. Design complete electromechanical systems and individual components for prototype, pre commercial, and commercial products. Apply principles of electronic theory, electrical testing, and mechanical design to integrated system development. Prepare design specifications, engineering analyses, and technical recommendations for leadership review and approval. Perform CAD modeling, system layouts, tolerance analysis, and detailed engineering documentation. Support hands on prototyping, testing, calibration, and iterative design improvements. Apply design for manufacturing and design for assembly principles to support scalable, high quality production. Collaborate cross functionally with engineering, manufacturing, and product development teams while providing technical leadership. Qualifications: Bachelors or Masters degree in Electromechanical Engineering or a closely related discipline from an ABET accredited program. Ten or more years of experience in electromechanical design and product development. Strong understanding of electromechanical system integration and interaction between electrical and mechanical subsystems. Proven experience designing products for manufacture in industrial or commercial environments. Advanced proficiency with SolidWorks or similar CAD software. Strong CAD and CAE design and analysis capabilities. Excellent analytical, problem solving, and technical communication skills. U.S. Citizenship is a mandatory, non negotiable requirement for this role. Desired Qualifications: Experience developing complex machinery or industrial processing equipment from concept through commercialization. Background supporting prototype builds and transition to production manufacturing. Experience preparing technical documentation including system layouts, component specifications, and calibration instructions. Experience serving as a technical lead or mentoring junior engineers in a product development environment.

**_What Industrial Engineering contributes to Cardinal Health_** Engineering is responsible for performing research and analyses to develop design options for components, products, systems and processes. Industrial Engineering is responsible for enhancing / developing processes, layout and associated tools. Identifies, analyzes and implements new or existing technology to optimize business processes. Designs process improvements to reduce cost, cycle time, improve quality and/or increase throughput. Directs external resources / contractors as required. The Principal Industrial Engineer supports Pharmaceutical Supply Chain Operations in the areas of capital project planning and management, capacity planning, operational process change, and overall distribution center operating layout optimization. The position will also support deployment of new process and automation solutions, facilitate new building designs and layouts changes. Additional responsibilities include partnering with Operations leaders, deploying capital project investments for Pharma Supply Chain Operations, and overseeing project implementation and adoption to realize improvements. **_Responsibilities_** + Drive process engineering initiatives including conceptual operational designs, layout-change scenarios, and innovative automation solutions. Work closely with business operations partners to iterate on solutioning to optimize results. Bring modernization concepts to Operations through material handling and engineering external partnerships. + Works closely with Pharmaceutical Supply Chain Operations Vice Presidents, and site leaders to manage capital projects planned within the buildings. Develops capital budget priorities, establishes preliminary budgets,business case justifications, and formalizes all capital requests for budgeted, approved, or newly scoped projects. + Leads multifunctional teams of stakeholders and contributors to deliver large complex projects on time and under budget.Coordinates with other functional groups including Corporate Real Estate,field operations, Security, Information Technology, Inventory, Quality & Regulatory, Sales,and EH&S to ensure efforts are aligned, and coordinated as projects are developed and analyzed. + Integrated team members supporting operations leadership teams to ensure that capital projects and infrastructure are deployed, coordinated, managed, and maintained to drive building performance expectations. This role also manages and executes small construction projects independent of Corporate Real Estate / Construction including all cage and vault construction resulting from expansion or relocation needs. **_Qualifications_** + Bachelor's Degree in related field or relevant work experience, preferred + 4-6 years of experience in Operations, project and budgetary management, capital investment analysis and deployment, leading complex projects with multi-functional teams, preferred + Experience with automation solutions, facility design, material handling systems, integrated warehouse controls and execution applications, preferred + Experience with AutoCAD and other software applications to drive warehouse design and concepting, preferred + Strong Leadership skills, Strong scheduling and organizational skills + Excellent technical problem-solving capability + High level of initiative - Team player + Willing and transparent communicator + Proficient with Microsoft Office Suite + Excellent written and verbal communication skills + Moderate travel to other facilities for projects and supervision of equipment installation (25%, up to 50% during specific deployment activities and project implementations) **_What is expected of you and others at this level_** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **Anticipated salary range:** $94,900 - $135,600 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 3/13/2026 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Transportation Design Engineer (Entry to Mid-Level) About DJ&A DJ&A is a multidisciplinary consulting firm that delivers a wide variety of professional services to clients nationwide. Our specialties include: transportation design, survey & mapping, sustainability, site development and utilities, construction inspection/management, geospatial solutions, structural design, project management, community involvement, right of way services, and environmental compliance. DJ&A encourages innovation and an environment where every employee feels empowered to thrive. We design projects that serve our communities at every level, from local pedestrian and non-motorized improvements to Interstate freeways. Our work is often situated in the most scenic and inspiring locations -National Forests, Parks, Monuments, recreational facilities, and other public lands-offering unique and rewarding projects that foster career growth and a fulfilling employee experience. Working for DJ&A provides an opportunity to be the problem-solvers who have a positive impact on our communities through sustainable engineering solutions. Founded in 1973 by two former U.S. Forest Service employees who saw a need for a company that uniquely understood Forest Service projects, DJ&A has continued to grow and expand over the last 52 years by embracing the values of our founders. Today, we have a team of 180+ skilled professionals in offices in Missoula, MT (headquarters); Bozeman, MT; Vancouver, WA; Denver, CO; Reno, NV; and Albuquerque, NM. Job Summary DJ&A seeks full-time Transportation Design Engineers with 1-10 years of relevant experience. Engineer In Training (EIT) Certificate preferred. Equivalent experience in transportation design may be considered in lieu of formal certification. The ideal candidate is an analytical, organized problem-solver with strong communication skills and a passion for civil engineering. Proven experience with road, highway, and trail design is desired. This is a great opportunity for a motivated, team-oriented professional who seeks to learn and grow in their field while working on a diverse range of infrastructure projects throughout the western U.S. Primary Duties and Responsibilities Support transportation engineering designs for Local, State, and Federal agencies. Provide support for construction administration (in-office and occasional on-site). Participate in the design and delivery of roadway infrastructure projects that vary in size and complexity. Work on multidisciplinary teams in both support and lead roles. Utilize design software, including AutoCAD, Civil 3D, or Bentley MicroStation ORD, to support project design tasks. Perform detailed CAD-based design, including roadway geometric design and corridor modeling. Prepare project deliverables, including quantity calculations, cost estimates, specifications, and construction schedules. Perform quality control checks, ensure code and design standard compliance, and follow QA/QC procedures. This position may require occasional travel, including overnight and weekend stays, primarily for construction inspection and site visits. While the primary role is office based, flexibility to support fieldwork is essential. Required Skills and Abilities: Proficiency in AutoCAD Civil 3D and/or MicroStation OpenRoads. Competency with Microsoft Office Suite software (Word, Excel, etc.). Strong written and verbal communication skills. Excellent planning, organizational, and problem-solving skills. Self-motivated, independent, and results-driven. Ability to meet tight deadlines and collaborate with geographically dispersed teams. Education and Experience: B.S. in Civil Engineering or related engineering field preferred. Relevant experience in transportation design may be considered in lieu of formal education. Familiarity with AASHTO, MUTCD, NACTO, and State DOT design manuals. Physical Requirements: Prolonged periods of sitting and computer use. Ability to lift up to 15 pounds occasionally. Ability to travel to remote project sites. Ability to access and navigate job sites and construction areas with noise, dust, and uneven ground. Willingness to work occasional nights or weekends as project schedules require. Wage and Benefits Salary commensurate with qualifications and experience. $31.50-$47.00/hour depending on experience. Non-exempt employees (prior to professional licensure): overtime paid at 1.5x hourly rate for hours worked over 40/week. Exempt employees (post-licensure): overtime paid as straight time. Medical, dental and vision benefits (monthly HDHP medical premiums fully paid for employee and dependents). Long-term disability and life insurance. Health Savings Account (HSA) or Flexible Spending Account (FSA) with annual company contribution. Roth and 401(k) retirement accounts. Profit sharing and bonus plan. 9/80 work schedule. Paid time off and holidays. Professional licensure reimbursement. Professional development training. Paid volunteer time and community involvement initiatives. Friendly, supportive, knowledgeable staff with a strong team culture! DJ&A is proud to be an Equal Employment Opportunity (EEO) employer. DJ&A is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at ******************.

Transportation Design Engineer (Entry to Mid-Level) DJ&A is a multidisciplinary consulting firm that delivers a wide variety of professional services to clients nationwide. Our specialties include: transportation design, survey & mapping, sustainability, site development and utilities, construction inspection/management, geospatial solutions, structural design, project management, community involvement, right of way services, and environmental compliance. DJ&A encourages innovation and an environment where every employee feels empowered to thrive. We design projects that serve our communities at every level, from local pedestrian and non-motorized improvements to Interstate freeways. Our work is often situated in the most scenic and inspiring locations -National Forests, Parks, Monuments, recreational facilities, and other public lands-offering unique and rewarding projects that foster career growth and a fulfilling employee experience. Working for DJ&A provides an opportunity to be the problem-solvers who have a positive impact on our communities through sustainable engineering solutions. Founded in 1973 by two former U.S. Forest Service employees who saw a need for a company that uniquely understood Forest Service projects, DJ&A has continued to grow and expand over the last 52 years by embracing the values of our founders. Today, we have a team of 180+ skilled professionals in offices in Missoula, MT (headquarters); Bozeman, MT; Vancouver, WA; Denver, CO; Reno, NV; and Albuquerque, NM. Job Summary DJ&A seeks full-time Transportation Design Engineers with 1-10 years of relevant experience. Engineer In Training (EIT) Certificate preferred. Equivalent experience in transportation design may be considered in lieu of formal certification. The ideal candidate is an analytical, organized problem-solver with strong communication skills and a passion for civil engineering. Proven experience with road, highway, and trail design is desired. This is a great opportunity for a motivated, team-oriented professional who seeks to learn and grow in their field while working on a diverse range of infrastructure projects throughout the western U.S. Primary Duties and Responsibilities Support transportation engineering designs for Local, State, and Federal agencies. Provide support for construction administration (in-office and occasional on-site). Participate in the design and delivery of roadway infrastructure projects that vary in size and complexity. Work on multidisciplinary teams in both support and lead roles. Utilize design software, including AutoCAD, Civil 3D, or Bentley MicroStation ORD, to support project design tasks. Perform detailed CAD-based design, including roadway geometric design and corridor modeling. Prepare project deliverables, including quantity calculations, cost estimates, specifications, and construction schedules. Perform quality control checks, ensure code and design standard compliance, and follow QA/QC procedures. This position may require occasional travel, including overnight and weekend stays, primarily for construction inspection and site visits. While the primary role is office based, flexibility to support fieldwork is essential. Required Skills and Abilities: Proficiency in AutoCAD Civil 3D and/or MicroStation OpenRoads. Competency with Microsoft Office Suite software (Word, Excel, etc.). Strong written and verbal communication skills. Excellent planning, organizational, and problem-solving skills. Self-motivated, independent, and results-driven. Ability to meet tight deadlines and collaborate with geographically dispersed teams. Education and Experience: B.S. in Civil Engineering or related engineering field preferred. Relevant experience in transportation design may be considered in lieu of formal education. Familiarity with AASHTO, MUTCD, NACTO, and State DOT design manuals. Physical Requirements: Prolonged periods of sitting and computer use. Ability to lift up to 15 pounds occasionally. Ability to travel to remote project sites. Ability to access and navigate job sites and construction areas with noise, dust, and uneven ground. Willingness to work occasional nights or weekends as project schedules require. Wage and Benefits Salary commensurate with qualifications and experience. $31.50-$47.00/hour depending on experience. Non-exempt employees (prior to professional licensure): overtime paid at 1.5x hourly rate for hours worked over 40/week. Exempt employees (post-licensure): overtime paid as straight time. Medical, dental and vision benefits (monthly HDHP medical premiums fully paid for employee and dependents). Long-term disability and life insurance. Health Savings Account (HSA) or Flexible Spending Account (FSA) with annual company contribution. Roth and 401(k) retirement accounts. Profit sharing and bonus plan. 9/80 work schedule. Paid time off and holidays. Professional licensure reimbursement. Professional development training. Paid volunteer time and community involvement initiatives. Friendly, supportive, knowledgeable staff with a strong team culture! DJ&A is proud to be an Equal Employment Opportunity (EEO) employer. DJ&A is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at ******************.

Job DescriptionDescription: Effective communicator dedicated to continuous process improvement responsible for directing, coordinating, and exercising functional authority for planning, organization, control, integration, and completion of engineering projects within areas of assigned responsibility. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. · Responsible to learn and take ownership of assigned areas in the industrial manufacturing facility and become an area expert on the assigned processes. · Responsible to monitor day to day operation, performance of processes and uptime of equipment while always working towards process optimization. · Responsible to recommend and develop projects in assigned areas. Develops improvement ideas through individual initiative. · Responsible to perform process improvements to all aspects of the processes which may include but are not limited to capital projects, day-to-day efficiencies, material handling, preventative maintenance, scheduling and more. · Responsible to assist in permitting of new and modified processes. · Responsible to develop economic analysis and justification, complete capital requests and to manage these projects within the limitations of the budget that is submitted. · Responsible to interface with vendors and contractors and to direct their activities along with acting as the contractor field representative for these individuals. · Responsible for management of contractors required for capital projects as is necessary under the Contractor Safety Program. · Responsible to reporting project status and details to Leadership effectively. · Responsible to perform a variety of engineering functions including mechanical design, heat transfer determinations, design drawings, fluid flow, ventilation, noise analysis of equipment and physical and chemical analysis of materials. · Responsible to uphold and understand company safety policies and engage actively in safety in design. · Responsible to write, develop and update Standard Operating Procedures for new or changed processes, and assists in operator training for new or changed processes. · Responsible to perform regular troubleshooting of existing mechanical, electrical, and process equipment. · May be required to assist in other areas and with other projects as necessary. EDUCATION and/or EXPERIENCE Bachelor's degree (B. S.) in Engineering from four-year college or university and five (5) years related experience. Chemical Engineering or Metallurgical/Materials Engineering preferred. MATHEMATICAL SKILLS Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.) in its most difficult phases. Ability to deal with a variety of abstract and concrete variables. COMPUTER APPLICATION SKILLS Windows; Microsoft Excel, Word, PowerPoint, and Outlook; AutoCAD; Equation solving software; DeltaV a plus. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk and talk or hear on the phone to receive and convey instructions to and from company personnel. The employee is occasionally required to stand, use hands and fingers to operate a computer keyboard, mouse, and telephone; reach with hands and arms to inspect equipment; climb into a forklift or on production equipment and stoop or crouch to assess equipment functioning. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include viewing and assessing equipment functioning and various spatial relationships through distance, color, and peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high precarious places to assess equipment functioning; fumes and/or airborne particles of copper or zinc dust; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; live electrical equipment; and vibration. The noise level in the work environment is usually very loud when working around equipment in the plant. Requirements:

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Chemical Engineer Needed in SE Montana - Competitive Salary, Innovative Projects, and Stunning Big Sky Country Views!! The Chemical Engineer provides assistance to engineering unit personnel to support development of specifications, preparation of store orders and estimates, review of available data to support project scope development, and preparation of outage reports. Develops and prepares plans of more than average difficulty and complexity and ensures they are consistent with business plans. Employs limited knowledge of engineering theory, mathematics, and the physical sciences. Performs the necessary research of files, drawings, codes, specifications, and other departments, offices or manufacturers. Acts as liaison with drafting personnel on field revisions and minor engineering changes. Provides assistance to engineering unit personnel in problem investigations and evaluations. Assists in obtaining performance data of power plant equipment. Uses computer terminal to manipulate and analyze data to make calculations and create graphic presentations to include in reports and presentations. Provides support for project management for maintenance and capital projects. Attends conferences of engineers and representatives of other departments to develop overall plans for projects. Evaluates proposals and recommends equipment and service purchases. Checks vendors' or manufacturers' prints for correctness and conformance with specification. Visits job sites to obtain information and to discuss problems with engineering and maintenance personnel. Prepares sketches, drawings, and schematic diagrams as necessary to support Unit functions. Primary Responsibilities 1. Assists in the work on smaller engineering projects or well-defined areas of larger projects. Uses existing procedures to investigate, evaluate and assist in producing technically correct and cost-effective designs or recommendations that solve ongoing problems. 2. Builds relationships that will facilitate knowledge transfer, cross functional knowledge of related work groups, and ability to present work products effectively. 3. Works under supervision in the field and/or home office in a variety of functions and challenging but structured work that develops competencies in the function/discipline. 4. Gathers and correlates basic engineering data using well defined engineering procedures, which may include routine and diagnostic testing of components and systems, and engineering studies. 5. Continually expands and improves technical and business skill set under own initiative with instruction, guidance and direction from others. 6. Assists in a variety of topics including developing innovative procedures, improved design recommendations or new or better equipment purchase recommendations. Basic Qualifications - Engineer 1. Bachelor's Degree in engineering from a college or university accredited by ABET, or recognized by ABET as substantially equivalent. Discipline required will vary by the specific job requirements. Preferred Qualifications 1. Internship/co-op in the energy industry preferred. 2. Engineer in Training Certificate. Basic Qualifications - Senior Engineer 1. Bachelor's Degree in engineering or engineering technology. Discipline required will vary by the specific job requirements or, Professional Engineer license in the specific position discipline. Discipline required will vary by the specific job requirements. 2. Minimum 5 years related engineering experience. 3. Working knowledge of regulatory requirements and industry standards for the specific position. Preferred Qualifications 1. Bachelors Degree in engineering. 2. Professional Engineer, registered in applicable state. Jamie Mathis Jamie@jmathisrecruiting.com JM Recruiting Recruiter/Owner 406-702-1092 Office

Hiring Company: Balanced Unitized Team (BMF) Curtain Wall & Aluminum Systems Program: TN Visa Industrial Engineer (Mexican Citizens) Contract type: Full-time, on-site Salary range: USD 80,000 120,000 per year, depending on experience and skills About the Employer Balanced Unitized Team is a family-owned company based in Montana, specialized in unitized curtain wall, aluminum windows and cladding systems for high-quality construction projects. We are a close-knit team that truly cares about our people: we value respect, open communication and a healthy work environment where everyones voice is heard. Many of our employees have been with us for years, growing their careers alongside the company. From the owners to the production floor, we work shoulder to shoulder, with a strong focus on safety, quality and teamwork. We invest in our collaborators, offer opportunities to learn new skills, and recognize those who take initiative and help us improve every day. If you are looking for a place where you are more than just a number, where your work has a direct impact and you can build long-term relationships, this is the right team for you. About the Opportunity Through our TN Visa program for engineers, we are recruiting an Industrial Engineer to lead the operations of a manufacturing plant specialized in unitized curtain wall, aluminum windows and cladding systems in the United States. You will be responsible for running the plant on a day-to-day basis: leading the production team, optimizing processes, improving efficiency and ensuring quality and safety across the operation. This position is ideal for an Industrial Engineer with strong experience in manufacturing, process improvement and team leadership, who wants to grow professionally in the U.S. within a specialized and technical environment. Main Responsibilities As the Industrial Engineer leading Plant Operations, you will: Oversee daily operations on the manufacturing floor and ensure production plans and deadlines are met. Manage and coordinate a 50-100 person team (production lines, supervisors, operators). Analyze production flows, identify bottlenecks and lead continuous improvement projects (cycle time, waste reduction, layout optimization, line balancing, etc.). Design, document and standardize production processes, work instructions and best practices. Implement lean manufacturing and process optimization initiatives to improve efficiency and productivity. Use production data and KPIs to drive decisions and report plant performance to ownership and management. Lead root cause analysis for recurring quality or production issues and implement corrective and preventive actions. Collaborate closely with owners, production, quality and maintenance to ensure smooth plant operations. Promote and enforce a safety-first culture in all areas of the plant. Participate in planning and execution of new automation, machinery or technology projects in the plant. Required Profile Bachelors degree in Industrial Engineering (Licenciatura en Ingeniería Industrial) required for TN Visa category. 5+ years of experience in manufacturing, ideally in: Curtain wall, aluminum windows, cladding, facades, or Metal-mechanic / fabrication plants with technical products and high-volume production. Proven experience supervising or managing plant operations and production teams. Strong background in process optimization, lean manufacturing, continuous improvement and KPI tracking. Comfortable working both on the production floor and in an office/engineering setting. Solid analytical and problem-solving skills, with the ability to work under pressure and handle multiple priorities. Intermediate to advanced English (able to communicate with management and the plant team in the U.S.). Nice to Have Experience in factories with ISO 9000 or similar quality systems. Experience with automation projects, CAD/CAM or CNC environments. Familiarity with P6 Primavera or other project scheduling tools. Experience using or implementing AI or digital tools to improve production processes. Compensation & Benefits Annual salary between USD 80,000 and 120,000, depending on experience and profile. Initial housing provided and paid by the company during your start-up period in the U.S. Health insurance (medical, and may include dental and vision) after the eligibility period. Paid time off (PTO), including vacation days and sick leave. Paid holidays according to the company calendar. Retirement plan (401(k) or similar) with company contribution (if applicable). All necessary tools, equipment and PPE provided by the company. Ongoing training and development in plant operations, process improvement and leadership. A family-owned, team-oriented work environment where safety, respect and collaboration are core values. TN Visa & Relocation Support This position is designed under the TN Visa Industrial Engineer category for eligible Mexican citizens. You will receive full support throughout the process: Job offer and documentation from the U.S. employer Guidance for TN Visa interview and consular process Orientation and support before traveling to the U.S. Our recruitment and TN Visa guidance are free of charge for candidates. You should never pay any placement fee for this opportunity. How to Apply Please submit your CV in English and (optionally) a short paragraph explaining why you are a good fit for this role. In your CV or application, please highlight: Your Industrial Engineering degree (university, graduation year). Your experience in manufacturing plants (industry, type of processes, size of teams). Examples of process improvement / lean / efficiency projects you have led. Any experience with curtain wall, aluminum, metal fabrication or similar products (if applicable). Required Skills: Eligibility Operators Lean Manufacturing Industrial Engineering Root Cause Analysis Operations Process Optimization Analysis Collaboration Recruitment ROOT Waste Daily Operations Machinery Salary Ownership Hiring Process Improvement Recruiting Compensation Instructions Continuous Improvement Optimization Insurance Manufacturing Automation Team Leadership Construction Pressure Windows Scheduling Documentation Planning Maintenance Teamwork Design Engineering English Leadership Training Communication Management

Project Engineer ***Work Location: Grand Forks AFB (Grand Forks, ND)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for overseeing all aspects of construction projects, from planning to execution and closeout. Managing and overseeing project plans, schedules, and budgets Coordinating with architects, engineers, and contractors to ensure project milestones are met; serving as a primary point of contact for clients and stakeholders, communicating project progress, issues, and resolutions effectively Performing documents review of contract documents for schedule compliance and reasonability. Identifying potential risks and developing mitigation strategies; ensuring compliance with legal and regulatory requirements Implementing quality control measures to ensure work meets specifications and standards Conducting regular inspections and audits to identify and address quality issues Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Assisting with hosting site visits and giving presentations to owner's representatives. Providing guidance, mentoring, and training to team members; overseeing contract negotiations, administration, and compliance, resolving disputes and issues related to contracts Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Produce monthly project reports displaying project status and updates for customers Participates in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and prepares contract modification documentation. Attend and participate in meetings with customers and contractors. Performs other duties as assigned Education/Experience: Bachelor's Degree in Engineering, Construction Management, Architecture, or related field Minimum 10 years Construction Project Management experience PMP certification is preferred. Experience with Federal Construction projects, particularly USACE, is preferred. Strong background in Project Management (PM), with the ability to lead and motivate teams to achieve project goals Strong interpersonal and presentation skills are required Strong technical competencies to create presentation materials and deliver presentations via electronic methods. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

's Quality Engineering & Assurance Team** Our Quality Engineering & Assurance team is the innovative engine at our company. We are a dedicated group of builders and problem-solvers responsible for the most critical, customer-facing platforms. Within this team, the Quality practice is not a downstream function but a fully integrated partner in development. Our mission is to embed quality into every stage of the lifecycle, and as a Quality Engineer, you will be on the front lines of this effort. **Position Overview** Are you a driven Quality Engineer passionate about building the future of testing? We are seeking a creative and hands-on QE to be a key contributor to our quality practice. This is an exciting opportunity to move beyond traditional QA and dive into the world of AI-driven testing, helping us build and maintain robust quality standards for our mission-critical intelligent applications that are redefining customer interaction. **Key Responsibilities** + Design, develop, and maintain test automation frameworks using Java and Python. Write clean, efficient, and scalable automation scripts for new features to ensure robust test coverage across all deliverables. + Perform API testing: Understand API concepts, develop and execute functional tests, interpret Swagger YAML files, and validate endpoints using Postman or Rest Assured automation frameworks. + Conduct database testing: Write and execute SQL queries to retrieve, update, and delete data, ensuring database integrity and reliability. + Own quality for assigned features and components: Collaborate with product managers and developers on requirements analysis, create detailed test cases, execute comprehensive test suites (functional, integration, regression), and provide final quality sign-off. + Track and report testing progress: Use tools such as JIRA, ADO, or ALM for defect logging and reporting, ensuring transparency of feature quality to the team and stakeholders. Also understanding of CI/CD concepts. + Implement and execute test plans for AI/ML applications: Support QA activities and certify the quality of AI-powered systems, including hands-on testing of chatbots for intent recognition, conversational flow, response accuracy, and edge case handling. + Leverage modern AI tools to enhance workflow: Utilize AI code assistants like GitHub Copilot to accelerate test script development and explore generative AI for tasks such as test data creation and bug report summarization. + Ensure AI reliability and fairness: Execute test cases to identify issues related to bias, fairness, and model robustness, contributing to the overall trustworthiness of AI systems. + Develop and maintain test automation scripts and frameworks using Java and Python. + Have proficiency with test and defect management tools, particularly JIRA or any similar tools. **Required Skills & Qualifications** + Bachelor's or Master's degree in Computer Science, Engineering, or a related technical field, or equivalent practical experience. + 0 - 1 years of professional experience in a Quality Assurance or Quality Engineering role. + Some hands-on experience developing and maintaining test automation scripts and frameworks using Java and Python. + Basic understanding of the Software Testing Life Cycle (STLC) and practical experience working in an Agile/Scrum environment. + A keen interest in or prior experience testing AI-powered applications, such as chatbots or other AI/ML-based systems. + Hands-on experience with the Hybrid Automation frameworks. + Familiarity with CI/CD concepts and tools (e.g., Jenkins, GitLab, GitHub Actions). + Exposure to performance testing tools (e.g., JMeter, Gatling). + Basic knowledge of cloud platforms (AWS, Azure, or GCP) and containerization (Docker) + A passion for learning and staying up to date with the latest trends in AI and software testing. **Location** New hires will be hired to the Cognizant office in **Plano, TX** , where you will work alongside other experienced Cognizant associates delivering technology solutions. Applicants must be willing to relocate to this major geographic area. While we attempt to honor candidate location preferences, business needs and position availability will determine final location assignment. **Start Date** New hires will start in **January 2026** . While we will attempt to honor candidate start date preferences, business need and position availability will determine final start date assignment. Exact start date will be communicated with enough time for you to plan effectively. **Salary and Other Compensation:** Applications are accepted on an ongoing basis. The annual salary for this position is $65,000.00 depending on experience and other qualifications of the successful candidate. This position is also eligible for Cognizant's discretionary annual incentive program, based on performance and subject to the terms of Cognizant's applicable plans. **Why Choose Us?** Cognizant delivers solutions that draw upon the full power and scale of our associates. You will be supported by high-caliber experts and employ some of the most advanced and patented capabilities. Our associate's diverse backgrounds offer multifaceted perspectives and fuel new ways of thinking. We encourage lively discussions which inspire better results for our clients. **Benefits** Cognizant offers the following benefits for this position, subject to applicable eligibility requirements: + Medical/Dental/Vision/Life Insurance + Paid holidays plus Paid Time Off + 401(k) plan and contributions + Long-term/Short-term Disability + Paid Parental Leave + Employee Stock Purchase Plan **Disclaimer** The hourly rate, other compensation, and benefits information is accurate as of the date of this posting. Cognizant reserves the right to modify this information at any time, subject to applicable law. **Work Authorization** Due to the nature of this position, Cognizant cannot provide sponsorship for U.S. work authorization (including participation in a CPT/OPT program) for this role. _Cognizant is always looking for top talent. We are searching for candidates to fill future needs within the business. This job posting represents potential future employment opportunities with Cognizant. Although the position is not currently available, we want to provide you with the opportunity to express your interest in future employment opportunities with Cognizant. If a job opportunity that you may be qualified for becomes available in the future, we will notify you. At that time you can determine whether you would like to apply for the specific open position. Thank you for your interest in Cognizant career opportunities._ Cognizant is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

Barnard Construction Company, Inc., based in Bozeman, Montana, is a heavy-civil construction company with projects underway across North America. Barnard is ranked by Engineering News-Record , a leading construction industry periodical, as one of the nation's Top 400 civil contractors. We specialize in dam construction and rehabilitation, power transmission and distribution, tunneling, inland marine, oil, gas, utility, and sewer and water pipeline projects. We offer competitive salaries, profit sharing, 401(k)s, a generous health plan, annual bonuses, and challenging career opportunities with a financially solid company. Barnard's people are the reason for the success of the company. Our reputation attracts the highest quality personnel, people who are committed to producing projects that set a standard for excellence. At Barnard, we build the riskiest, most difficult, complex jobs we can find and we hire people who thrive on tough work and demanding opportunities. Qualifications Undergraduate degree in Engineering, Business Administration (Accounting, Management or Finance), Construction Management or a related field. Equivalent experience in a construction-related position will also be considered. Underground tunneling, underground construction or mining experience. Must be willing to travel and relocate. Project sites are located domestically and internationally, so relocation and/or travel are required. Strong organizational and time management skills. Thorough attention to detail, with the ability to recognize discrepancies. Strong work ethic - willing to do what it takes to get the job done. Ability to work independently as well as part of a team. Ability to freely access all points of a construction site in wide-ranging climates and environments. Responsibilities High level of involvement in the operations of our cost control system and analysis of construction costs. Participate in monthly forecasting revenue and costs accruals. Accumulate all necessary data and prepare monthly pay estimates. Process and estimate change orders and Requests for Information as directed by Project Manager. Coordinate and schedule shop drawings and submittals. Maintain a complete and current record of submittals, approvals, and resubmittals, including a file of letters of transmittal and dates of each transaction. Process/manage material deliveries - ensure that materials received are properly inspected for quantity and quality and in compliance with Contract documents. Manage and negotiate subcontractor and material contracts. Assist in developing and updating project schedule. Work closely with field construction personnel (Superintendents, Foremen and Crews). Equal Opportunity Employer Veterans/Disabled, E-Verify Employer

Job Description When you join Forsgren Associates, a newly acquired Apex Company, you won't just be 'going to work'. You'll be helping grow a longstanding business while receiving the recognition and support your commitment to professional growth deserves. Your Responsibilities as a Transportation Engineer: Prepare Engineering drawings, specifications, and contract documents Coordinate with clients and regulatory agencies for permitting compliance Prepare budgets and schedules for projects Support clients with services during bidding, contracting, and construction Develop and manage project scopes, schedules, and budgets Provide technical guidance and quality control What we're looking for: B.S. in Civil Engineering (or related field) Professional Engineer (PE) registration in Montana (or ability to obtain within 6 months) 4+ years of Civil Engineering experience Experience in designing transportation facilities for State transportation departments & local jurisdictions Experience with MTD's procedures and requirements Experience in AutoCAD Civil 3D, MicroStation OpenRoads, and Geopak design software Why you'll love working for us: Flexible Schedule Competitive Pay Medical, Vision, Dental, and HSA Generous PTO 401K Plan including employer contribution Apex Job Title: Engineer 2 Req ID: 10970

Job DescriptionBenefits: Company parties Competitive salary Opportunity for advancement Training & development JOB TITLE: Project Engineer JOB SUMMARY: The Project Engineer assists the Project Manager and Superintendent in our Civil division with organizing, controlling, monitoring and recording activities which are part of the construction management of a Civil Excavation project. RESPONSIBILITIES: Oversee coordination and maintenance of project documentation. Conduct field verifications quality control. Assist the safety personnel with implementation and enforcement of safety standards. May assist in creating material takeoffs and procuring materials for the project. Understand the project overall schedule and its relationship to specific tasks. May assist with coordination of subcontractors and company employees. May manage submittals, change orders, and Requests for Information. Assist the Superintendent and Project Manager in any other assigned tasks. Will be the eyes and ears on site for the Project Manager. QUALIFICATIONS: A four-year engineering or construction management degree is required. OSHA 10 and 30 certifications are desired. SWPPP certifications are desired. Must have experience with Microsoft Office Suite. Must pass a pre-employment drug screen and physical. Effective oral communication and writing skills. Ability to problem solve, forward think, and plan ahead. Working Conditions and Physical Demands This position is moderately strenuous. Applicants must be able to lift and carry objects. Applicants must be able to work in all weather conditions. Activities may include climbing ladders or scaffolding, walking, balancing, stooping, kneeling and standing for periods of time. Applicants must be able to see clearly and recognize small details. Applicants must be able use a tablet, keyboard and mouse. Applicants must be able to effectively communicate by phone, email and text messaging.

DCI Engineers - Kalispell, MT Launch your structural engineering career with DCI Engineers in our Kalispell, MT office. As a Structural Project Engineer, you'll work on diverse building projects, collaborate with talented engineers and BIM designers, and grow your technical expertise - all while contributing to a team that values innovation, mentorship, and work/life balance. What You'll Do: As a Structural Project Engineer, you will contribute to the design, analysis, and construction support of building projects, including: Perform structural design of assigned tasks under the supervision of the Project Manager Collaborate with BIM Designers to produce structural construction documents and draft details in REVIT Assist Project Managers with construction support, including shop drawing review and responding to RFIs Ensure accuracy and attention to detail in all construction documents Progressively grow your technical knowledge through internal project experience and continuing education Develop and maintain client relationships What You Bring: To succeed as a Structural Project Engineer, you should bring the following skills and experiences: 0-3 years of structural engineering experience related to building design Working knowledge and project experience using steel, concrete, and wood design materials Experience designing all categories of gravity framing and wind-resisting systems Basic knowledge of design/build codes such as AISC, ACI 318, IBC, ASCE 7 Working knowledge of structural analysis software such as RISA 3D, RAM, ETABS, Enercalc, or similar Ability to manage your time and juggle multiple tasks and projects simultaneously Desire to provide excellent service and build strong client relationships Positive attitude, willingness to learn, and effective communication skills State-issued Engineer-in-Training (EIT) certificate Structural, Civil, or Architectural Engineering degree from an ABET-accredited university (Master's preferred) Why DCI Engineers At DCI Engineers, you'll find more than just a job - you'll join a team that values collaboration, innovation, and a lifestyle you crave. With 20+ offices across the United States and 35+ years of experience, we've built a firm that challenges employees to step outside the box, provide creative solutions, and deliver exceptional value to projects. We foster a supportive and entrepreneurial culture, where mentorship, professional growth, and work/life balance are a priority. Your time outside of work fuels your productivity, creativity, and professional development, and we encourage our employees to pursue it. Compensation & Benefits Competitive salary + overtime earning opportunities Company-paid medical, dental, and vision insurance Tax-advantaged savings account options Company-paid Life, AD&D, and Long-Term Disability Voluntary Short-Term Disability, Life, AD&D, and supplemental coverage 401(k) with annual company contribution 8 paid holidays (including 1 floating holiday) Paid vacation and sick leave Paid parental leave Commuter benefits (where available) Health & Fitness Program Cell phone benefit Seminar and licensing reimbursements

PURPOSE: This Project Engineer will perform engineering project assignments with an emphasis on process improvements including design and upgrade of existing facilities. The project engineer will plan, execute, and finalize projects, meeting the deadlines and within budget guidelines. This includes acquiring resources, working with team members, and third-party contractors or consultants in order to deliver projects according to plan. KEY OBJECTIVES AND RESPONSIBILITIES: Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility. Reviews design for compliance with engineering principles, company standards, customer contract requirements, and related specifications. Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems. Prepares bid packages and equipment inquiries. Participates in evaluation and selection process. Controls expenditures within limitations of project budget. Prepares interim and completion project reports. Directs all activities associated with project implementation and successful completion. Directs draftsmen with project drawing requirements. Performs safety audits and safety evaluations of contractors and plant personnel. Additional duties as assigned. REQUIRED EDUCATION/EXPERIENCES: Bachelor's Degree (B.S.) Engineering required; Mechanical, Chemical, Civil, or Electrical preferred. COMPETENCIES: Possess excellent personal safety record. Experience with safety training, planning and troubleshooting preferred. Experience in a disciplined FEL 0-7 Project Management System preferred. Understanding of process engineering required. Basic ability to design equipment and systems. Basic ability to assess, project and review overall project costs. Experience at leading and operating both independently and within a team-oriented, collaborative environment required. General business, accounting and financial skills. Experience with MS Project, Word, Excel and Access. Strong written and oral communication skills. Demonstration of Calumet Values - Safety, Excellence, Entrepreneurship, Integrity, Innovation, Collaboration, Respect