Manufacturing engineer jobs in Murfreesboro, TN - 182 jobs

**GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc.)** **To help facilitate administration of relocation benefits if you are selected, please apply using the permanent address you would move from.** **Work Arrangement:** **Onsite:** This role is categorized as onsite. This means the successful candidate is expected to report to an assigned facility on a full-time basis. Each successful candidate will be offered an onsite role at a specific location. Candidate location preferences are considered but cannot be guaranteed. **What You'll Do:** Our plants are the groundwork for GM and a hotbed of innovation. We need controls engineer interns to assist maintenance personnel in operation and maintenance of specialist equipment. As a Controls Engineer Intern, you would be accountable for controls engineering and electrical support for industrial manufacturing equipment. These tasks would teach you electrical root causing analysis and problem solving as well as leadership skills to provide technical support and direction to support personnel/skilled trades within the organization. Quality and safety are extremely meaningful to us, so enforcing safe work practices is the highest priority and implementing objectives for ergonomics, health/safety, and housekeeping, which means that you would have to investigate system and equipment problems and provide technical input in problem resolution. **Responsibilities:** + Leads electrical projects including new or operations improvements, and periodic repair and replacement + Participates in functional area plant meetings and related activities to represent engineering and to assist in reaching the plant's performance goals + Develops cost estimates, investment forecasts, business cases, appropriation requests and plans for minor project activity + Utilizes statistical methods for continuous improvement on plant systems + Develops and monitors planning timetables and projects schedules + Coordinates and communicates the development of changes to improve conditions for the assembly process + Programming of manufacturing technology (PLC, robotics, HMI) + Analyzes product, process and technology to determine the best methods of manufacture + Assists in the design and building of tools and equipment or recommends improvements to existing processes **Job Location** We have opportunities available in the locations below for this role. Please indicate in your application which of these locations you are interested in. + Arlington, TX + Defiance, OH + Detroit, MI + Grand Rapids, MI + Lansing, MI + Moraine, OH + Orion, MI + Parma, OH + Saginaw, MI + Spring Hill, TN + Wentzville, MO Specific physical requirements of the position include the ability to: + Walk and stand for prolonged periods of time. + Read standardized work instructions, operate machines and tools, and perform quality inspections. + Promptly detect and respond to safety instructions, alarms, and signals. Wear personal protective equipment, for example: safety glasses, gloves, hats, ear plugs, and safety shoes. + Work in a loud manufacturing environment that is not climate controlled (conditions can be hot or cold). + Frequently and repetitively bend, twist, kneel, crouch, and reach to perform work. + Lift or carry materials weighing up to 15 pounds and periodically carry or lift materials weighing up to 40 lbs. + Occasionally sit, climb (including ladders and lifts) and drive vehicles and equipment. **Required Qualifications:** + Pursuit of a Bachelor's degree in one of the following areas: Electrical Engineering/Electrical Engineering Technology, Controls Engineering, Computer Engineering, or Computer Science + Must be graduating between August 2026 and June 2028 + Able to work full-time, 40 hours per week + Must be willing to work in a plant environment **What Will Give You a Competitive Edge (Preferred Qualifications):** + Outstanding interpersonal and relationship management skills with the ability to effectively collaborate with varying levels of the organization + Excellent written and verbal communication skills with the ability to distill complex subjects to a wider audience + Emerging partnership and collaboration skills and ability to learn from and share knowledge with co-workers in a fast-paced environment + Evidence of strong character with integrity, honesty, accountability and trust + Consistently demonstrates innovative thinking that is customer-centric + Excellent project management skills and the proven ability to manage multiple projects at any given time. Start dates for this internship role are May & June of 2026. **What you'll get from us (Benefits):** + Paid US GM Holidays + GM Family First Vehicle Discount Program + Result-based potential for growth within GM + Intern events to network with company leaders and peers **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Simpson Strong-Tie is a leader in engineered structural connectors, software, and solutions for the building industry. We maintain a reputation as a trusted manufacturer, partner, and corporate citizen committed to our customers and employees. Our founder, Barc Simpson established 9 Principles of Business we live out as company values and have made Simpson Strong-Tie an inspiring place to work since 1956. Our team of talented people are dedicated to our shared mission: to provide solutions that help people design and build safer, stronger structures. Learn about our company culture directly from our team. YOU As an Associate Lean Continuous Improvement Engineer, you will be responsible for streamlining the manufacturing process, eliminating waste, increasing efficiency and driving continuous improvement through the plant and warehouse/ shipping department. You will facilitate Kaizen events and support team leaders to identify bottlenecks in processes, collect and analyze data, implement countermeasures, evaluate process after change, compile results, present findings and solutions, recommend permanent changes to processes, and train associates on continuous improvement methods. This position will work Monday through Friday, 8am to 4:30pm. WHAT YOU'LL BE DOING (% of Time) Support the implementation of the Lean Continuous improvement roadmap through training our associates on 5S and Lean Methods and Tools and managing the improvement projects pipeline. (35%) Lead Lean (kaizen) events aimed to remove process waste and serve as a coach/mentor to team leads and associates. (35%) Collect, organize and analyze data, summarize findings, develop conclusions for projects and key business metrics and/or processes (cost savings, efficiency, utilization). (20%) Maintain project-tracking pipeline, prepare cost benefits analysis for review with management team, and make recommendations for prioritizations. (10%) Other assignments as needed/requested. DESIRED SKILLS AND EXPERIENCE If you can do everything listed above, you've got what it takes. Perhaps some of the following would be helpful too: Bachelor's degree in industrial /manufacturing engineering, preferred. 1-year experience in Lean Continuous Improvement, required. Lead kaizen events, conduct time studies, conduct root cause analysis and 5Whys, conduct 5S, teach A3 thinking and PDCA, and conduct Value Stream analysis. Analytical ability: Data collection and statically significant analysis. Ability to perform advanced Microsoft Excel skills such as, V-lookup, Pivot tables and charts, Nested If Statements, and Macros. Project management, presentation skills/power point skills. PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is frequently required to sit, talk, and hear, and sometimes walk and stand. While performing the duties of this job, the employee may occasionally push or lift up to 25 lbs. WORK ENVIRONMENT This job is operated in a professional office environment where standard office equipment such as computers, phones, printers/scanners, etc. are frequently used. TRAVEL REQUIRED This job requires 10% domestic travel. WORK STATUS & LOCATION This full-time, exempt position is located in Gallatin, TN. RELOCATION Relocation is not available for this position. Pay $57,900 - $92,600/ year REWARDS AT SIMPSON STRONG-TIE We recognize and reward employees with a carefully designed and comprehensive rewards package, including competitive compensation, quarterly bonuses or commission and first-rate benefits. May exclude some positions, such as seasonal jobs. Quarterly Bonuses/Commission: You will be eligible for either a bonus or commission, paid on a quarterly basis. We believe all employees affect customers, sales and revenue - directly or indirectly - and should be rewarded by sharing the company profits. Benefits: We provide a wide range of benefits for eligible full-time employees including: medical, dental, vision, retirement contributions, employee stock purchase and bonus plans, pay for holidays, vacation, sick days, funerals and jury duty, years of service awards, employee discounts, employee referral bonuses, charitable contribution matching, education reimbursement and more. View benefit plan details here: ******************************** In keeping with our values and commitment to diversity, equity, and inclusion in our communities, we are an equal opportunity employer. This means that our employment decisions are based on your qualifications and merit, and our business needs. Please note all job offers are contingent upon a successful background investigation and drug test. Simpson Strong-Tie's drug policy is based upon Federal Law, and therefore will screen applicants for amphetamines, including methamphetamines, cocaine, phencyclidine and opiates. #NowHiring #GetHired #Hiring #HiringNow Company: Simpson Strong-Tie Company Inc.

We are seeking a highly skilled Injection Mold Process Engineer to support the design and manufacturing of headliner and soft trim components. This role encompasses responsibilities from early design input through tooling development, process optimization, and equipment integration to ensure product quality and manufacturability. Responsibilities * Collaborate with design teams to review headliner and soft trim concepts for manufacturability. * Recommend product improvements to align with engineering, performance standards, and equipment specifications. * Assess process feasibility, operating conditions, and quality requirements during design reviews. * Develop RFQs for forming tools, piercing dies, assembly equipment, poka-yokes, and vision systems. * Evaluate tooling and equipment drawings for compliance with specifications. * Design and assemble new or modified mechanical components for industrial machinery and equipment. * Investigate process failures and operational issues; diagnose root causes and implement corrective actions. * Analyze product test results against design/quality specifications and adjust equipment as needed. * Use multi-meter to interpret electrical readings for basic troubleshooting of equipment. * Modify form tools and assembly equipment to meet design, quality, and performance requirements. * Operate or learn to operate forming presses, water jets, and assembly equipment for trials and operator training. * Provide hands-on troubleshooting and resolution of tooling/equipment manufacturing issues. Qualifications * Experience with headliner and soft trim tooling and assembly processes. * Strong understanding of tooling design, process engineering, and equipment integration. * Understanding of PLC ladder logic. * Ability to use Auto-Cad, Solid Works, and/or Catia. * Proficiency in Basic Windows, Excel, PowerPoint, and Word. * Fanuc and/or Yaskawa Robot programming required. * Proficiency in reading and interpreting technical drawings and specifications. * Ability to read and understand electrical, hydraulic, and pneumatic schematics. * Hands-on experience with forming presses, water jets, and assembly equipment. * High school diploma with 10 years maintenance experience; or BS Degree in Mechanical Engineering, Industrial Engineering, or Engineering Technology; or AAS in Mechatronics, Maintenance, or Tooling. Job Type & Location This is a Permanent position based out of Murfreesboro, TN. Pay and Benefits The pay range for this position is $90000.00 - $110000.00/yr. Health, Vision, Dental, 401K, PTO, Paid Holidays Workplace Type This is a fully onsite position in Murfreesboro,TN. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Manufacturing Engineer - Manufacturing - Base Salary to 105k/year - Ashland City, TN Our client is a global manufacturer, with 12,000 employees and operations across seven countries, produces residential and commercial water heaters, boilers, and water treatment products. As a stable category leader, the company fosters a culture of continuous improvement, emphasizing Lean and Six Sigma principles along with a strong commitment to safety and ergonomics. In this Manufacturing Engineer role, the focus is on driving process improvements, managing capital projects, and applying design-for-manufacturability (DFM) strategies to enhance throughput, quality, and cost efficiency within a high-volume industrial plant. Responsibilities: Apply ergonomic and safety standards across processes, equipment, and facilities Develop, evaluate, and improve manufacturing methods using data and analysis Assess new technologies/processes to lift efficiency, productivity, quality, and cost Build capital justifications for tooling, equipment, and savings initiatives Analyze labor/space/flow; design equipment and workspace layouts for max efficiency Serve on Product Development System (PDS) teams to ensure DFM, tooling, and equipment readiness for launches Partner with vendors on specifications; source equipment/materials; evaluate to quality standards Estimate cycle times, staffing, and costs to inform management decisions Collaborate with management/engineering on capacity, schedules, and constraints Implement Lean tools: continuous improvement, kaizen/blitzes, Kanban, line balancing, TPM, takt time Team with maintenance on troubleshooting, installations, and equipment setup Qualifications: Bachelor's in Mechanical Engineering or related field 5+ years' related manufacturing engineering experience Hands-on with Six Sigma, Lean, and continuous-improvement methodologies Strong technical communication: reports, procedures, presentations to cross-functional groups Proficient in applied math and statistics (probability, statistical inference, geometry/trig; fractions/percentages/ratios) Demonstrated problem solving: define issues, collect data, establish facts, draw valid conclusions Ability to read/analyze technical procedures, standards, and regulations Compensation: Base salary to 105k/year Relocation Assistance available Comprehensive benefits: medical & dental insurance, company-paid life insurance, 401k retirement savings plan, short- & long-term disability, tuition assistance #INDALL

Our client is a global manufacturer, with 12, 000 employees and operations across seven countries, produces residential and commercial water heaters, boilers, and water treatment products. As a stable category leader, the company fosters a culture of continuous improvement, emphasizing Lean and Six Sigma principles along with a strong commitment to safety and ergonomics. In this Manufacturing Engineer role, the focus is on driving process improvements, managing capital projects, and applying design-for-manufacturability (DFM) strategies to enhance throughput, quality, and cost efficiency within a high-volume industrial plant. Responsibilities: Apply ergonomic and safety standards across processes, equipment, and facilities Develop, evaluate, and improve manufacturing methods using data and analysis Assess new technologies/processes to lift efficiency, productivity, quality, and cost Build capital justifications for tooling, equipment, and savings initiatives Analyze labor/space/flow; design equipment and workspace layouts for max efficiency Serve on Product Development System (PDS) teams to ensure DFM, tooling, and equipment readiness for launches Partner with vendors on specifications; source equipment/materials; evaluate to quality standards Estimate cycle times, staffing, and costs to inform management decisions Collaborate with management/engineering on capacity, schedules, and constraints Implement Lean tools: continuous improvement, kaizen/blitzes, Kanban, line balancing, TPM, takt time Team with maintenance on troubleshooting, installations, and equipment setup Qualifications: Bachelor' s in Mechanical Engineering or related field 5+ years' related manufacturing engineering experience Hands-on with Six Sigma, Lean, and continuous-improvement methodologies Strong technical communication: reports, procedures, presentations to cross-functional groups Proficient in applied math and statistics (probability, statistical inference, geometry/trig; fractions/percentages/ratios) Demonstrated problem solving: define issues, collect data, establish facts, draw valid conclusions Ability to read/analyze technical procedures, standards, and regulations Compensation: Base salary to 105k/year Relocation Assistance available Comprehensive benefits: medical & dental insurance, company-paid life insurance, 401k retirement savings plan, short- & long-term disability, tuition assistance #INDALL

To become the world's greatest baker, we need the world's greatest team members Reporting to the Continuous Improvement Team Leader, the Continuous Improvement Engineer will initiate and drive execution on projects related to standardizing best practices, continually reducing costs and increasing overall efficiencies; all within a fast-paced, high-growth food manufacturing environment. What FGF Offers: * FGF believes in Home Grown Talent, accelerated career growth with leadership training, unleashing your * Competitive Compensation, Health C Welfare Benefits including Vision C Dental and flexible options at competitive * 401k matching program * Discount program - Restaurants, gyms, shopping, * Tuition reimbursement Primary Responsibilities * As part of the Continuous Improvement (CI) team, work on multiple projects related to operations, including Manufacturing, Supply Chain, Sanitation, Quality, and Maintenance C Reliability * Collect and analyze data following a structured methodology (DMAIC) to implement sustainable improvements in all aspects of Operations * Working with a multidisciplinary team, the CI Engineer will support planning and execution of key continuous improvement projects under the guidance of the CI Team Leader * Support commissioning activities of new equipment and manufacturing lines * Create an environment which continues to foster continuous improvement and lean manufacturing * Lead training sessions for multiple teams including Production, Sanitation, Quality, and Maintenance * Support troubleshooting and driving completion of projects to enable them to be brought to fruition * Ensure that a safe working environment is maintained at all times * Working in automation and development of prototype applications Required Experience * Completed Post-Secondary Education Engineering, Business Management or a related field * 1-3 years' experience in a Continuous Improvement role in manufacturing * Certifications in Lean Six Sigma is an asset * Experience with Excel Advanced Functions and VBA is an asset * Experience with Microsoft Power Platform (Power Bi, PowerApps, Power Automate, or interest in learning) is an asset * Must have strong working knowledge of Microsoft Office * Prior work experience in a food manufacturing environment is an asset * Must possess excellent analytical skills * Must have demonstrated ability to interact with others and is adept at leading and motivating a team * Excellent interpersonal, organizational and communication skills are required * Flexible working different work schedules when needed * Must be flexible, high energy and passionate in getting things done * Valid driver's license What is the recipe for a great career at FGF? Working at FGF Brands, there is never a dull moment! FGF is a leading North American bakery company with facilities across the USA and Canada with a specialized focus across all key bakery categories, including naan, muffins, croissants, donuts, cakes, artisan breads and flatbreads. As an innovative company that is continually growing there is always challenging yet rewarding work to be a part of. We have an entrepreneurial spirit that encourages all our Team Members to use their own creativity and out-of-the-box thinking to come up with solutions and new ideas. Job Level B-HO

Purpose Ensure consistency of RMA products through use of Control Plans and Standard Operating Conditions (SOC's) that ensure our customers receive the same product every time. Promote and lead standardization and relentless continuous process improvement. This position's performance results will be measured in these specific key areas: (1) reduced internal rejects and customer complaints, (2) increased Job Rate, (3) reduced Yield Loss, and (4) increases in Cpk for key process and product parameters. Areas of Responsibility / Tasks Performance must reflect appropriate level of expertise and achievement of the desired results for the items listed below: General Policy Safety Help transfer best process and equipment practices across production lines. Work with S & E Coordinator, where necessary, to update PPE requirements. Implement necessary environmental controls to avoid pollution and contamination. Quality & Product Development Supervise customers receive same formulations and finished product every time, following Product & Process Control Plans. Coordinate with RMA Commercial Teams to ensure all customer requirements are being consistently met. Work with Technology Team and Procurement organization to promote standardization of raw materials where possible. Use data and the Voice of Customer (internal and external) to determine where improvements are necessary, initiate corrective action and measure success. Process Engineering Support equipment & process design during project phase. Support project activities like budget, scope & schedule. Supervise process operational conditions for production lines. Operations Ensure plant is “starting where they stopped” on all production runs and that SOC's are updated in timely manner to reflect actual, optimal and sustainable run conditions. Support Plant Manager on KPI goals as related to process improvements through CIT team leadership and involvement. Focus on Job Rate, Yield Loss, Safety and Quality. Supports utilization of Company ERP's systems, (Control Plan, SOC, In-Process Sheet, Stock Requisition, Raw Material Audit Form, etc.) and ensures correct and consistent use on shop floor. Drive improvements via Management by Walking Around (MBWA). Uphold the Ravago Code of Conduct standards. Other duties as assigned by the Plant Manager. Minimum Qualifications/ Education / Experience / Certifications Education: Must have a min of Bachelor of Science in Engineering (BSE) from an Accredited Engineering Program (Mechanical, Chemical, Electrical, Polymer or Materials Engineering or related Engineering field) Experience: Working primarily on manufacturing shop floor and not behind desk. Demonstrated leadership capabilities. Must possess excellent interpersonal, people management and problem solving skills. Must have excellent written and verbal communication capabilities. Detail oriented, system thinker, disciplined, ability to prioritize and multi-task. Proficient in Microsoft Excel, PowerPoint, Word, ERP's) Experience in reading, designing, and modifying schematics and wiring diagrams using AutoCAD. Experience in designing, analyzing, and optimizing polymer extrusion, compounding, and blending processes. Competencies; Knowledge, Skills, Abilities (KSA) To perform this role successfully, an individual must have experience achieving desired result(s) in their areas of responsibility. The requirements listed below are representative of observable behaviors and essential knowledge, skill, and abilities required of a successful incumbent within our culture. Must be comfortable working in a shared space, with constant noise, with/or without the use of a private office. Must be comfortable working in a non-climate controlled environment. Schedules may vary from week to week based on business demands in excess of 40 hours with or without notice. All injuries regardless of severity must be reported to your Supervisor/HR immediately. Work Environment / Conditions The work environment/conditions described herein are representative of those that an incumbent may experience, and therefore must be adaptable to work in a shared space, with constant noise, with/or without the use of a private office. Schedules may vary from week to week based on business demands in excess of 40 hours with or without notice. Physical Requirements / Demands The physical demands described herein are representative of those that must be met by an incumbent to successfully perform the essential functions of this job. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions & physical demands of this role. Must be able to lift 55lbs. Must have color vision. Have use of fingers and hands for writing and typing Ability to climb straight incline ladders. Occasionally reach with hands and arms, stoop, kneel, crouch or crawl. Travel Some overnight travel away from home plant location may be required. Weekend and holiday travel generally will not be required IND1

Job DescriptionDesign the Backbone of Clean Energy & Carbon Conversion Type: Full-Time Seniority: Mid to Senior Level / Technical Contributor Join Enexor BioEnergy Enexor is a venture-backed, early-stage climate tech company just outside of Nashville, TN, developing distributed systems that turn organic and plastic waste into clean energy and high-purity CO₂. We are reimagining how the world addresses emissions, waste, and energy access-one modular system at a time. We're not just solving problems. We're redefining what's possible at the intersection of engineering, energy, and sustainability. Why This Role Matters We're hiring a Process Engineer with a strong mechanical foundation to help design and deploy our next-generation waste-to-energy and carbon capture systems. This is not a modeling-only role. You'll work end-to-end-translating high-level process concepts to concrete designs by developing P&IDs, performing mass and energy balances, modeling processes, selecting hardware, guiding physical builds, and gaining insights from testing. By diving into technical challenges to turn concepts into reality, your work will sit at the core of how our systems perform in the real world. This role is perfect for process design engineers with a systems background and strong mechanical intuition who want to own full process-mechanical design and get hands-on in fabrication, instrumentation, and deployment. What You'll Do Design & Simulate Separation Processes: Build and validate cyclic adsorption (TSA/PSA) flowsheets in process modeling software (including custom isotherm and kinetic models); analyze breakthrough curves, cycle efficiency, and heat integration. Perform Mass & Energy Balances: Develop detailed mass-energy balances for energy systems and carbon capture processes. Translate Models into Hardware: Generate PFDs and P&IDs from your process simulations; size pressure vessels, adsorption beds, heat exchangers, pumps/blowers, and piping networks based on process conditions. 3D CAD Layout & Mechanical Detailing: Create or review CAD assemblies and AutoCAD schematics to ensure the process equipment fits skid dimensions and meets requirements. Support Fabrication, Commissioning, & Testing: Work with the shop and controls teams to oversee fabrication, instrumentation, and loop checks; participate in testing development and data review. Data Analysis & Model Refinement: Use testing results to update simulation parameters and re-optimize cycle timings or hardware specs. Cross-Functional Collaboration: Partner daily with chemical, mechanical, and controls engineers plus technicians, aligning on control strategies, safety interlocks, and operational procedures. Continuous Improvement: Identify design-to-cost opportunities and reliability enhancements; propose material, cycle, or control refinements to boost capture rate and reduce parasitic loads. Requirements What We're Looking For Education: B.S. or M.S. in Chemical Engineering or Mechanical Engineering with significant process modeling experience. Process Modeling: 3-8 years designing and simulating adsorption or gas-separation processes-expertise in Aspen Plus (including custom isotherms & dynamic cycles), gPROMS, or equivalent. Transport & Thermodynamics: Deep understanding of mass-transfer, reaction kinetics, heat-transfer, and property estimation methods. Experimental Validation: Proven ability to validate simulation and modeling results through lab-scale or pilot-scale experimentation-designing tests, analyzing data, and refining models accordingly. Mechanical Aptitude: Hands-on experience sizing pressure vessels, piping networks, heat exchangers, pumps, and blowers; experienced in SolidWorks/Inventor and AutoCAD. Field & Commissioning Experience: Familiarity with pilot-scale builds, instrumentation calibration, loop checks, and on-site troubleshooting. Bonus Points For: Hands-on experience with cyclic adsorption systems (TSA/PSA) using Aspen Adsorption or equivalent. Designing modular or containerized process skids for rapid deployment. Control-system co-simulation (DCS/PLC loop tuning, model-based control strategies). CFD or multiphase-flow modeling to support detailed mechanical design. Scaling processes from pilot to demonstration or commercial units. Familiarity with gas-analysis instrumentation. Benefits Why You'll Love It Here Mission with urgency: Your designs will help clean up emissions and generate real impact. Hands-on everything: If you're not satisfied just modeling, you want to see your ideas come to life through building, testing, and owning full systems. Flat org, fast feedback: Make decisions, iterate quickly, and learn fast. Equity upside: Be part of a venture-backed team building breakthrough clean tech systems. Compensation & Benefits Competitive salary + equity opportunity in a fast-growing climate tech company. 401(k) plan and health insurance stipend (QSEHRA). Paid vacation and holidays. Ready to Design Systems That Matter? Send your resume and a brief note to ******************. Highlight your experience with process-mechanical systems, gas treatment, or thermal integration.

We are in search of a Mechanical Process Engineer. This position can be performed in either of our Tullahoma, TN or Farmington Hills, MI offices. Join our team turning abstract ideas into realities. Collaborate with industry experts to develop solutions to mission-critical challenges, such as NASA's return to the moon, the DoD's national security initiatives, international automotive manufacturers' development of fuel-efficient and electric vehicles, and the DoE's energy research. We tackle challenges in emerging technologies, cyber, intelligence, space exploration, energy transformation, and resiliency to ensure national security. As the world's thinkers, visionaries, and doers, we disrupt the status quo and affect real, meaningful change in how we provide solutions to our customers, operate our business, and support communities. Our Group specializes in the design, construction, and operation of unique and complex research and development facilities, including, as examples, wind tunnels (aerospace, automotive, and motorsports), rocket test stands, climatic chambers, jet engine test cells, acoustic chambers, altitude test facilities, captive trajectory systems, and nuclear facilities. Our projects span the automotive, motorsports, defense, nuclear, and aerospace markets. Recent clients include Audi, Boeing, BMW, Fiat Chrysler, Ford, Honda, General Motors, NASA, U.S. Air Force, U.S. Navy, U.S. Department of Energy, Volkswagen, confidential F1 motorsports clients, and many others in North America, Europe, and Asia. Our capabilities and some recent project photos and videos can be found in the downloadable zip file at *********************************** . Use "anontg" as both the user name and password. Most of your designs will be unique, and you will usually be working on several projects at one time in a dynamic, challenging, and even fun environment. This position will provide you with an exciting opportunity to lead and manage projects as part of a multi-discipline team of professionals. We are looking for a mechanical process engineer who will work to ensure client satisfaction and deliver key projects within scope, budget, and schedule. You should be a self-motivated professional with at least 5 years of progressive design experience. Essential Duties and Responsibilities: * Working on and leading project teams to develop new designs for various process systems supporting automotive and aerospace research and test facilities. * Taking ownership of the technical schedule and budget performance of the work assigned to them * Under direction of a senior engineer; planning, scheduling, conducting and coordinating engineering work through the selection and adaptation or modification of techniques, procedures and criteria * Analyzing features or work and applying sound engineering principles and practices * Reviewing results from assigned tasks and from junior engineer and determining if results are complete, correct, and adequately documented. * Developing technical reports and presentations for project management and clients * Formally checking the work of others for completeness * Working closely with structural, machine design, controls and instrumentation and aerodynamics/fluid dynamics engineers. * Sizing and specifying piping/ducting and piping/ducting components, selection of compressors, pumps and fans, valves, flow measurement and fluid conditioning equipment. * Designing * High pressure cryogenic and pneumatic piping systems * High Temperature systems including steam systems * Refrigeration, vacuum, and fuel systems * Specialty HVAC systems and components * Working in a fast-paced environment and under deadlines while maintaining high quality standards * Supporting Project Manager and Senior Engineer in on-going design efforts * Participating in internal and external meetings and design reviews with team members and clients * Gathering information, interviewing stakeholders, making studies, performing calculations, and preparing rough layouts and sketches as required. * Installation support and supervision: working with suppliers, subcontractors and other trades from the office and project sites * Create engineering calculations and specifications and oversee the creation of engineering drawings. * Traveling will be required at times to support design reviews, attend factory acceptance testing of equipment, provide support for construction activities and provide support for startup/commissioning activities at job sites. * Participating in proposal development and support marketing activities. * Field work will be required including climbing up on test stands and working around machinery. * Must be able to work independently and as part of a multi-disciplined team to meet project budgets and schedules. #LI-DH1 #TGhotjobs #cjpost #MOIP #CMSHotJobs MINIMUM EDUCATION, EXPERIENCE, TRAINING, AND /OR SKILL REQUIREMENTS: * B.S. Mechanical Engineering from an accredited engineering school. * Minimum 5 Years engineering experience or 2 - 3 Years engineering experience and a MS degree from an accredited engineering school. * Prior design experience with process systems is preferred * Self-motivated with the ability to work collaboratively and independently * Ability to work in a multi-discipline team environment is required * Proficiency in Microsoft Office Word, PowerPoint and Excel * Demonstrate: * Knowledge and experience with common process piping systems * Strong mechanical and process engineering analytical skills * Excellent oral and written communications, self-motivation, team-oriented work practices, strong technical problem solving and strong organizational approach * High ethical values and strong commitment to self-development, teamwork, and desire to work in Due to federal requirements for portions of the assigned work US Citizenship is required. * Experience with management of scope, schedule, and budget of individual projects * Design experience including layout of process drawings and specifications * Knowledge of AMSE B31.1 and B31.3 and ASME B&PV Code * Knowledge of thermodynamics, fluid flow - compressible and incompressible, thermal sciences, and process systems. Experience in design and/or maintenance of mechanical process systems is preferred but not required. * Software experience preference: AutoCAD, AutoPipe, Caesar II, Mathcad, Creo, AFT * Preferred skills and certifications * FE/EIT certification * Previous DOE nuclear, DoD, NASA, or test facility experience ESSENTIAL FUNCTIONS OF THE POSITION Unusual or Special Physical Requirements of Position Examples: Specify % of Time * Field Work * Special clothing/equipment Other * Office and computer-based work for 80 - 90% of time * Occasional site visits requiring general access around construction and project sites, involving ability to access upper and lower levels. 10-20% of time. * Special clothing/equipment and other PPE may be required during site visits (15%) * Must be able to lift 50 lbs Description of Work Environment Examples: Specify % of Time * Indoors/Outdoors * Travel / Transportation Requirements * Other * Office Environment for 80 - 90% of time * Field work may be required including outside work (10 - 20%) * Travel to perform field work at project sites or to attend customer meetings (10 - 20%) Equipment and Machines Involved in Work Tasks Examples: Specify % of Time * Office equipment/machines * Office equipment (Computers, fax, telephones, copiers etc.) 80 - 90 % * During travel to construction and project sites, use handheld equipment such as measurement equipment, cameras, etc (10 - 20%) Criticality of Attendance Examples: Specify * Overtime, regular days, etc. * Shift: 1 st , 2 nd, 3 rd . * Regular day shift attendance is mandatory. (100%) Work arrangement is for work to be performed in the office (baseline). Hybrid work arrangement possible for proven performers and depending on project responsibilities. * Occasional overtime may be required to meet demanding project schedules (10 - 20%) #CMSTechGroup #Techgroup

Designs, implements and monitors new processes and continuously improves existing processes to meet customer needs and the overall strategic business plan. Coordinates designs and projects of new and existing products. Key Responsibilities: · Learn, support, develop, and optimize all wire and cable-related equipment and processes. · Continuously improve existing equipment by increasing efficiency, reducing scrap, and minimizing downtime. · Support the installation and commissioning of new equipment. · Collaborate closely with operations and maintenance teams to establish effective maintenance protocols and drive performance improvements. · Develop and implement processes and procedures for new equipment. · Enter product specifications and quality control requirements into the ERP system. · Diagnose and troubleshoot issues related to: o Processes (human error, procedural gaps, etc.) o Raw materials (supplier quality, contamination, etc.) o Equipment (mechanical failures, design flaws, etc.) · Optimize productivity by improving run rates, standardizing processes, reducing scrap, and maximizing material efficiency. · Design and procure tooling and equipment as needed. · Create plant layouts and equipment/tooling drawings. · Support cross-functional efforts, occasionally assisting with maintenance, operations, and engineering across other locations. Raw Material Management: · Establish incoming material inspections. · Troubleshoot material-related issues. · Collaborate with suppliers to identify root causes and determine resolutions. · Qualify new materials. Quality Control: · Develop and maintain product specifications. · Create and implement testing procedures. · Conduct operator training as necessary. Continuous Improvement / Lean Manufacturing: · Monitor and enhance wire & cable equipment KPIs. · Potential involvement with regulatory bodies (NRTL) and industry standards including UL, ETL, SAE, ASME, ASTM, ANSI, CSA, NEMA, NEC, and ISO (9001:2015; 14001). · Participate in production review meetings to ensure efficient manufacturing methods. · Apply statistical analysis to estimate and improve future manufacturing cycle times. Customer and Project Interface: · Act as a technical liaison between customers and internal development/validation teams. · Develop and manage project plans while coordinating with customers to drive progress. · Define product applications and performance criteria. · Prepare and deliver technical documentation for internal and external stakeholders with precision and clarity. · Domestic and international travel may be required. · Perform other duties as assigned. Requirements / Attributes Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Industrial or Chemical or related field is a must have Minimum 5 years of professional experience in wire drawing, extrusion (can be chemical or plastics), & jacketing processes. These are must-haves. Solid understanding and knowledge of electrical, mechanical and chemical processes and principles Sound problem-solving and decision-making skills Detail-oriented with excellent planning and organization skills able to prioritize Motivated individual who needs little or no guidance Ability to work in a team environment Must have strong project management skills, PMP (Project Management Professional certification preferred) Knowledge and experience with Lean Six Sigma principles and concepts; Black Belt certification is preferred Knowledge and experience in ISO 9001;2015 and/or IATF 16949 is preferred Proficient computer skills in Microsoft Excel, Word, PowerPoint, and AutoCAD

Bonnell Aluminum is looking for a self-motivated Process Manufacturing Engineer for the Carthage, Tennessee facility, who will report to the Engineering Manager. Ideal candidate will develop an effective working relationship with the area department manager to facilitate coordination and prioritization of work for that area of responsibility. The work will involve projects related to process, productivity, cost, safety and quality improvements. Must be ready to work as part of a team and independently as needed. PRIMARY RESPONSIBILITIES: Duties and Tasks/Essential Functions: Technology and Process Area Expert Develop in-depth technical understanding of the operation and maintenance requirements for the equipment and process. Develop capital project process and execution expertise. Develop user-level expertise in current and future ERP/MES (Enterprise Resource Planning/Manufacturing Execution System) Responsibilities/Scope/Complexity Must demonstrate a strong commitment to safety procedures and lead or be involved in identifying and implementing safety improvement ideas. Ability to use work breakdown structure to effectively manage small and large projects. Support operations in reviewing equipment efficiencies, downtime, and scrap. Make recommendations for improvements to equipment and operating procedures to improve productivity. Provide technical and engineering support in the ongoing operation and maintenance of existing equipment. Provide oversight of vendors and contractors as needed for specific projects. Makes decisions within known work processes and make recommendations for improvements using a data-based approach (Sig Sigma, Lean, etc.). Ability to run routine data analysis. Positive and productive interactions with internal and external customers and suppliers. Continuous Improvement (Operational Excellence) Ownership and execution of continuous improvements in the area of responsibility, which will include collaborative development of a prioritized list of CI projects for each process and sub-processes for each technical area. Execution of Continuous Improvement projects based on Division, Plant and Area of Responsibility targets/goals. Tracking and overall facilitation of focused activities relating to: Safety Risk Reductions Quality Improvements Productivity Improvements Cost Reductions - Annual area cost reduction, tracking and auditing Revenue Enhancements Capability Improvements General Efficiency Improvements (Time, Inventory, Motion, Waiting, Over Processing, Defects) Lean Events (Project, Kaizen, Burst, Do-it) Facilitate Lean Events Conduct Team Member training Key resource for area team leaders, including team leader CI training Overall event scheduling and coordination Use of the DMAIC process for continuous improvement projects Responsible for all project status briefs and report-outs. Responsible for collecting, evaluating, prioritizing, and executing waste stoppers submittals from operators and recommending for possible recognition. Capital Project Management Capital justifications for small/large projects Project write-up and submittal Technology Specifications Construction/Installation Management Contractor Management Start-up and Commissioning Operations Training & Qualification Systems, Safety, Quality, Productivity, and Reliability assessments and mitigations REQUIREMENTS Educational and Experience Requirements Must have a Mechanical Engineering degree or similar discipline from an accredited college with a GPA equivalent to or greater than 3.0 on a 4.0 scale. 5-7 years of experience in maintenance, engineering, and/or technical activities in a manufacturing environment. Knowledge of Paint Line, Anodizing, Casting, and Aluminum Extrusion processes are desirable. Familiarity with PLCs and various machine programming languages required; ability to program machines desirable. Automation and robotics experience is a plus. Lean Six Sigma Green Belt or Black Belt desirable Ability to travel as required Skills/Knowledge Subject Matter Expert - Developing subject matter knowledge and expertise Leadership - Developing leadership skills Critical Thinking - Tactical critical thinking Work Process Management - Learning roles and processes Communication Skills - Ability to communicate effectively verbally and written, including presentations. Required Tools/Software Knowledge Microsoft Office suite including Word, Excel, Outlook and PowerPoint Project Management Software Quality Companion and Minitab Working knowledge of J.D. Edwards data queries would be a plus AutoCAD modeling and drawing creation COMPENSATION: Salary: Based on experience and degree Employee Benefits: Paid Vacation Medical, Dental and Life Insurance 401 (K) plan On-site Clinic On-site Fitness Center

Job Description Work for an automated machine-building company that designs and manufactures custom machinery for all industries including automotive, cosmetics, injection molding, medical, and others. This OEM works closely with its customers to bring their visions to life while also ensuring that productivity and profitability are maximized. Join their team in La Vergne, TN as a Controls Engineer! Why work here: The company promotes a team atmosphere in the workplace and makes a concerted effort to keep the lines of communication open between all employees and management through daily interactions as well as social activities scheduled throughout the year. Their facilities and equipment are modern and use state-of-the-art technology. They pay competitive wages based on performance and offer clean and, in some cases, air-conditioned facilities to work in. Health, dental, & vision Paid vacation Paid sick time 401k Matching And more! Duties & Responsibilities: Design complex automation equipment per defined project scope including all control systems and robotics. Have knowledge in robotic programming, PLC programming, Robot simulation, and HMI programming, and be able to implement it into robust designs. Generate electrical schematics and BOMs in compliance with established company standards and applicable regulatory codes. Create and document control system software programs using structured programming techniques, for PLCs, HMIs, PCs, and Robots as necessary. Develop approved drawings, programming, and design standards for the department. Responsible for reviewing assigned project schedules and providing the necessary effort\work hours to ensure all targets can be made or making a detailed request for assistance to Controls Engineering Manager immediately when it is determined targets cannot be made with your individual effort. Test and debug machines and systems. Support installation, testing, and debugging of machines and systems at customers' facilities. Responsible for updating all drawings after a job is complete. Responsible for writing portions of the machine operation manual, specifically, the Controls and Operation sections. Communication with customers, vendors, and co-workers in a professional and courteous manner. Participate in design and review meetings for assigned projects. Provide support for any control system issue or concern with customers. Travel for machine installation as required. Travel as required for Sales calls or meetings. Assist the Applications department with quotations including pricing, write-up, concept drawings, and schedule when requested. Qualifications: BS/AS Degree in Engineering discipline and/or relevant experience in lieu of degree 5+ years of Industrial Automation experience Experience with various controls platforms (Allen-Bradley, Siemens, and others) Experience with PLC and HMI programming and troubleshooting Must be able to travel up to 30% Experience with AutoCAD Electrical or other drafting software Experience with programming robots (ABB, Fanuc, and others)

Our client, a manufacturing company located in the Lebanon, TN area, is hiring a full-time Quality Engineer. Responsibilities include, but are not limited to: Support plant quality systems and customer quality requirements Lead root cause analysis and corrective actions for quality and production issues Develop and maintain PFMEA, Control Plans, and Work Instructions Monitor KPIs, scrap, warranty data, etc..and drive continuous improvement Support internal and external audits Interface with customers and suppliers on quality issues Support APQP, PPAP, and new product launches Qualifications Bachelor's degree in Engineering or related field 2+ years of quality engineering experience within a manufacturing environment. Experience with problem-solving tools and data analysis. Our Client Offers: Annual base salary Health, dental, and vision insurance, 401(k) with company match, paid time off and holidays, and more. Opportunities for professional growth and advancement Pay Details: $60,000.00 to $80,000.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc.) To help facilitate administration of relocation benefits if you are selected, please apply using the permanent address you would move from. Work Arrangement: Onsite: This role is categorized as onsite. This means the successful candidate is expected to report to an assigned facility on a full-time basis. Each successful candidate will be offered an onsite role at a specific location. Candidate location preferences are considered but cannot be guaranteed. What You'll Do: Our plants are the groundwork for GM and a hotbed of innovation. We need controls engineer interns to assist maintenance personnel in operation and maintenance of specialist equipment. As a Controls Engineer Intern, you would be accountable for controls engineering and electrical support for industrial manufacturing equipment. These tasks would teach you electrical root causing analysis and problem solving as well as leadership skills to provide technical support and direction to support personnel/skilled trades within the organization. Quality and safety are extremely meaningful to us, so enforcing safe work practices is the highest priority and implementing objectives for ergonomics, health/safety, and housekeeping, which means that you would have to investigate system and equipment problems and provide technical input in problem resolution. Responsibilities: Leads electrical projects including new or operations improvements, and periodic repair and replacement Participates in functional area plant meetings and related activities to represent engineering and to assist in reaching the plant's performance goals Develops cost estimates, investment forecasts, business cases, appropriation requests and plans for minor project activity Utilizes statistical methods for continuous improvement on plant systems Develops and monitors planning timetables and projects schedules Coordinates and communicates the development of changes to improve conditions for the assembly process Programming of manufacturing technology (PLC, robotics, HMI) Analyzes product, process and technology to determine the best methods of manufacture Assists in the design and building of tools and equipment or recommends improvements to existing processes Job Location We have opportunities available in the locations below for this role. Please indicate in your application which of these locations you are interested in. Arlington, TX Defiance, OH Detroit, MI Grand Rapids, MI Lansing, MI Moraine, OH Orion, MI Parma, OH Saginaw, MI Spring Hill, TN Wentzville, MO Specific physical requirements of the position include the ability to: Walk and stand for prolonged periods of time. Read standardized work instructions, operate machines and tools, and perform quality inspections. Promptly detect and respond to safety instructions, alarms, and signals. Wear personal protective equipment, for example: safety glasses, gloves, hats, ear plugs, and safety shoes. Work in a loud manufacturing environment that is not climate controlled (conditions can be hot or cold). Frequently and repetitively bend, twist, kneel, crouch, and reach to perform work. Lift or carry materials weighing up to 15 pounds and periodically carry or lift materials weighing up to 40 lbs. Occasionally sit, climb (including ladders and lifts) and drive vehicles and equipment. Required Qualifications: Pursuit of a Bachelor's degree in one of the following areas: Electrical Engineering/Electrical Engineering Technology, Controls Engineering, Computer Engineering, or Computer Science Must be graduating between August 2026 and June 2028 Able to work full-time, 40 hours per week Must be willing to work in a plant environment What Will Give You a Competitive Edge (Preferred Qualifications): Outstanding interpersonal and relationship management skills with the ability to effectively collaborate with varying levels of the organization Excellent written and verbal communication skills with the ability to distill complex subjects to a wider audience Emerging partnership and collaboration skills and ability to learn from and share knowledge with co-workers in a fast-paced environment Evidence of strong character with integrity, honesty, accountability and trust Consistently demonstrates innovative thinking that is customer-centric Excellent project management skills and the proven ability to manage multiple projects at any given time. Start dates for this internship role are May & June of 2026. What you'll get from us (Benefits): Paid US GM Holidays GM Family First Vehicle Discount Program Result-based potential for growth within GM Intern events to network with company leaders and peers About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

We are seeking a Mechanical Engineer to join the team. This role supports cutting-edge projects across the automotive industry, as well as Department of Defense (DOD) and Department of Energy (DOE) initiatives. The ideal candidate will bring strong expertise in mechanical process design and systems design, contributing to innovative solutions that advance technology and performance in mission-critical applications. Responsibilities * Develop, optimize, and validate mechanical processes for R&D and production environments. * Support design, integration, and testing of mechanical systems for diverse applications. * Prepare technical reports, design documentation, and process specifications. * Analyzing features or work and applying sound engineering principles and practices * Developing technical reports and presentations for project management and clients * Designing: * High pressure cryogenic and pneumatic piping systems * High Temperature systems including steam systems * Refrigeration, vacuum, and fuel systems * Specialty HVAC systems and components * Create engineering calculations and specifications and oversee the creation of engineering drawings. Qualifications * U.S. Citizenship is mandatory due to project requirements. * Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related discipline from an accredited institution. * 4+ years of experience in mechanical process design or systems engineering. * Knowledge of engineering principles, materials, and manufacturing processes. * Ability to work independently and in team settings on complex R&D projects. * Experience with aerospace systems, defense-related engineering, or energy sector projects. * Familiarity with AFT Impulse/Fathom, AutoPIPE, simulation software, or Ceasar 2. * Strong fundamentals in thermodynamics. * Problem-solving, analytical, and communication skills. Work Environment The work environment requires on-site presence, with half days on Fridays. The role features a Monday through Friday schedule with a 40-hour work week and little to no overtime. The team specializes in designing, constructing, and operating unique and complex research and development facilities, including wind tunnels, rocket test stands, climatic chambers, jet engine test cells, acoustic chambers, altitude test facilities, captive trajectory systems, and nuclear facilities. Projects span the automotive, motorsports, defense, nuclear, and aerospace markets. Job Type & Location This is a Contract position based out of Tullahoma, TN. Pay and Benefits The pay range for this position is $57.69 - $76.92/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tullahoma,TN. Application Deadline This position is anticipated to close on Jan 17, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Our client is a global manufacturer, with 12,000 employees and operations across seven countries, produces residential and commercial water heaters, boilers, and water treatment products. As a stable category leader, the company fosters a culture of continuous improvement, emphasizing Lean and Six Sigma principles along with a strong commitment to safety and ergonomics. In this Manufacturing Engineer role, the focus is on driving process improvements, managing capital projects, and applying design-for-manufacturability (DFM) strategies to enhance throughput, quality, and cost efficiency within a high-volume industrial plant. Responsibilities: Apply ergonomic and safety standards across processes, equipment, and facilities Develop, evaluate, and improve manufacturing methods using data and analysis Assess new technologies/processes to lift efficiency, productivity, quality, and cost Build capital justifications for tooling, equipment, and savings initiatives Analyze labor/space/flow; design equipment and workspace layouts for max efficiency Serve on Product Development System (PDS) teams to ensure DFM, tooling, and equipment readiness for launches Partner with vendors on specifications; source equipment/materials; evaluate to quality standards Estimate cycle times, staffing, and costs to inform management decisions Collaborate with management/engineering on capacity, schedules, and constraints Implement Lean tools: continuous improvement, kaizen/blitzes, Kanban, line balancing, TPM, takt time Team with maintenance on troubleshooting, installations, and equipment setup Qualifications: Bachelor's in Mechanical Engineering or related field 5+ years' related manufacturing engineering experience Hands-on with Six Sigma, Lean, and continuous-improvement methodologies Strong technical communication: reports, procedures, presentations to cross-functional groups Proficient in applied math and statistics (probability, statistical inference, geometry/trig; fractions/percentages/ratios) Demonstrated problem solving: define issues, collect data, establish facts, draw valid conclusions Ability to read/analyze technical procedures, standards, and regulations Compensation: Base salary to 105k/year Relocation Assistance available Comprehensive benefits: medical & dental insurance, company-paid life insurance, 401k retirement savings plan, short- & long-term disability, tuition assistance #INDALL

Design the Backbone of Clean Energy & Carbon Conversion Type: Full-Time Seniority: Mid to Senior Level / Technical Contributor Join Enexor BioEnergy Enexor is a venture-backed, early-stage climate tech company just outside of Nashville, TN, developing distributed systems that turn organic and plastic waste into clean energy and high-purity CO₂. We are reimagining how the world addresses emissions, waste, and energy access-one modular system at a time. We're not just solving problems. We're redefining what's possible at the intersection of engineering, energy, and sustainability. Why This Role Matters We're hiring a Process Engineer with a strong mechanical foundation to help design and deploy our next-generation waste-to-energy and carbon capture systems. This is not a modeling-only role. You'll work end-to-end-translating high-level process concepts to concrete designs by developing P&IDs, performing mass and energy balances, modeling processes, selecting hardware, guiding physical builds, and gaining insights from testing. By diving into technical challenges to turn concepts into reality, your work will sit at the core of how our systems perform in the real world. This role is perfect for process design engineers with a systems background and strong mechanical intuition who want to own full process-mechanical design and get hands-on in fabrication, instrumentation, and deployment. What You'll Do Design & Simulate Separation Processes: Build and validate cyclic adsorption (TSA/PSA) flowsheets in process modeling software (including custom isotherm and kinetic models); analyze breakthrough curves, cycle efficiency, and heat integration. Perform Mass & Energy Balances: Develop detailed mass-energy balances for energy systems and carbon capture processes. Translate Models into Hardware: Generate PFDs and P&IDs from your process simulations; size pressure vessels, adsorption beds, heat exchangers, pumps/blowers, and piping networks based on process conditions. 3D CAD Layout & Mechanical Detailing: Create or review CAD assemblies and AutoCAD schematics to ensure the process equipment fits skid dimensions and meets requirements. Support Fabrication, Commissioning, & Testing: Work with the shop and controls teams to oversee fabrication, instrumentation, and loop checks; participate in testing development and data review. Data Analysis & Model Refinement: Use testing results to update simulation parameters and re-optimize cycle timings or hardware specs. Cross-Functional Collaboration: Partner daily with chemical, mechanical, and controls engineers plus technicians, aligning on control strategies, safety interlocks, and operational procedures. Continuous Improvement: Identify design-to-cost opportunities and reliability enhancements; propose material, cycle, or control refinements to boost capture rate and reduce parasitic loads. Requirements What We're Looking For Education: B.S. or M.S. in Chemical Engineering or Mechanical Engineering with significant process modeling experience. Process Modeling: 3-8 years designing and simulating adsorption or gas-separation processes-expertise in Aspen Plus (including custom isotherms & dynamic cycles), gPROMS, or equivalent. Transport & Thermodynamics: Deep understanding of mass-transfer, reaction kinetics, heat-transfer, and property estimation methods. Experimental Validation: Proven ability to validate simulation and modeling results through lab-scale or pilot-scale experimentation-designing tests, analyzing data, and refining models accordingly. Mechanical Aptitude: Hands-on experience sizing pressure vessels, piping networks, heat exchangers, pumps, and blowers; experienced in SolidWorks/Inventor and AutoCAD. Field & Commissioning Experience: Familiarity with pilot-scale builds, instrumentation calibration, loop checks, and on-site troubleshooting. Bonus Points For: Hands-on experience with cyclic adsorption systems (TSA/PSA) using Aspen Adsorption or equivalent. Designing modular or containerized process skids for rapid deployment. Control-system co-simulation (DCS/PLC loop tuning, model-based control strategies). CFD or multiphase-flow modeling to support detailed mechanical design. Scaling processes from pilot to demonstration or commercial units. Familiarity with gas-analysis instrumentation. Benefits Why You'll Love It Here Mission with urgency: Your designs will help clean up emissions and generate real impact. Hands-on everything: If you're not satisfied just modeling, you want to see your ideas come to life through building, testing, and owning full systems. Flat org, fast feedback: Make decisions, iterate quickly, and learn fast. Equity upside: Be part of a venture-backed team building breakthrough clean tech systems. Compensation & Benefits Competitive salary + equity opportunity in a fast-growing climate tech company. 401(k) plan and health insurance stipend (QSEHRA). Paid vacation and holidays. Ready to Design Systems That Matter? Send your resume and a brief note to ******************. Highlight your experience with process-mechanical systems, gas treatment, or thermal integration.

Work for an automated machine-building company that designs and manufactures custom machinery for all industries including automotive, cosmetics, injection molding, medical, and others. This OEM works closely with its customers to bring their visions to life while also ensuring that productivity and profitability are maximized. Join their team in La Vergne, TN as a Controls Engineer! Why work here: The company promotes a team atmosphere in the workplace and makes a concerted effort to keep the lines of communication open between all employees and management through daily interactions as well as social activities scheduled throughout the year. Their facilities and equipment are modern and use state-of-the-art technology. They pay competitive wages based on performance and offer clean and, in some cases, air-conditioned facilities to work in. Health, dental, & vision Paid vacation Paid sick time 401k Matching And more! Duties & Responsibilities: Design complex automation equipment per defined project scope including all control systems and robotics. Have knowledge in robotic programming, PLC programming, Robot simulation, and HMI programming, and be able to implement it into robust designs. Generate electrical schematics and BOMs in compliance with established company standards and applicable regulatory codes. Create and document control system software programs using structured programming techniques, for PLCs, HMIs, PCs, and Robots as necessary. Develop approved drawings, programming, and design standards for the department. Responsible for reviewing assigned project schedules and providing the necessary effort\work hours to ensure all targets can be made or making a detailed request for assistance to Controls Engineering Manager immediately when it is determined targets cannot be made with your individual effort. Test and debug machines and systems. Support installation, testing, and debugging of machines and systems at customers' facilities. Responsible for updating all drawings after a job is complete. Responsible for writing portions of the machine operation manual, specifically, the Controls and Operation sections. Communication with customers, vendors, and co-workers in a professional and courteous manner. Participate in design and review meetings for assigned projects. Provide support for any control system issue or concern with customers. Travel for machine installation as required. Travel as required for Sales calls or meetings. Assist the Applications department with quotations including pricing, write-up, concept drawings, and schedule when requested. Qualifications: BS/AS Degree in Engineering discipline and/or relevant experience in lieu of degree 5+ years of Industrial Automation experience Experience with various controls platforms (Allen-Bradley, Siemens, and others) Experience with PLC and HMI programming and troubleshooting Must be able to travel up to 30% Experience with AutoCAD Electrical or other drafting software Experience with programming robots (ABB, Fanuc, and others)

Our client, a manufacturing company located in the Lebanon, TN area, is hiring a full-time Quality Engineer. Responsibilities include, but are not limited to: Support plant quality systems and customer quality requirements Lead root cause analysis and corrective actions for quality and production issues Develop and maintain PFMEA, Control Plans, and Work Instructions Monitor KPIs, scrap, warranty data, etc..and drive continuous improvement Support internal and external audits Interface with customers and suppliers on quality issues Support APQP, PPAP, and new product launches Qualifications Bachelor's degree in Engineering or related field 2+ years of quality engineering experience within a manufacturing environment. Experience with problem-solving tools and data analysis. Our Client Offers: Annual base salary Health, dental, and vision insurance, 401(k) with company match, paid time off and holidays, and more. Opportunities for professional growth and advancement Pay Details: $60,000.00 to $80,000.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.