Manufacturing engineer jobs in San Bernardino, CA

Senior R&D Engineer (SolidWorks) Contract Visa: USC /Green Card- W2 role Mandatory: Medical Device experience, SolidWorks, change management (any PLM) is MUST JD: 1.Good in SolidWorks (1 to 2 years) 2.Windchill Change management experience 3.Medical Device Product development 4.Validation & Verification (V&V) 5. Good in communication and interpersonal skills Ritesh Rawat Raas infotek corporation 262 Chapman road, Suite 105A, Newark, DE-19702 Phone: ************ Ext: 142, Email: **************************** Website: raasinfotek.com

We are seeking an experienced and dynamic Manufacturing Manager to oversee daily operations within our manufacturing facility. The ideal candidate will lead production teams, ensure quality standards, and optimize manufacturing processes to meet company goals. This leadership role requires strategic planning, excellent communication skills, and a strong understanding of manufacturing systems. The Manufacturing Manager will play a key role in driving efficiency, safety, and continuous improvement across all production activities. Direct hire, Located in Placentia, CA 92870 Offering $110K-130K DOE Duties Monitor all manufacturing operations and processes to ensure compliance to ISO 9001 and safety standards. Analyze operating reports and plan for annual budgets to support business needs that help to meet or exceed company targets and goals. Maintain a safe work environment and follow all safety regulations Oversee daily floor manufacturing operations, while mentoring manufacturing Supervisors and Process Engineer to support you with daily task and activities. Use Strategy Deployment to develop and create a continuous improvement mind set with a focus on safety, first pass reliability, decreasing scrap, and increasing efficiency. Support manufacturing departments to help with inventory management, equipment maintenance, and material management in the plant. Support the quality department to establish best in class quality and establish standard processes and training for all plant personal. Analyze operating expenses and look for ways to reduce costs in our production and labor cost. Responsible for ensuring conflicts are managed and resolved among departments and employees. Responsible for hiring and training new employees along with performance managing employees to meet company standards. Support the maintenance department activities to help reduce downtime on machines and keep the facility in excellent working condition. Ensure all legal requirements, company safety procedures, and local and state health and safety regulations are met. Maintain a safe work environment through training, equipment, and process improvements. Develop and communicate productivity and efficiency goals and plans to meet those goals Establish cost control programs to meet or beat budgeted/forecasted levels in staffing and manufacturing expenses. Responsible for continuous improvement in manufacturing operations to ensure quality products - minimize defects and control waste and scrap. Establish and achieve scrap/material usage variance goals. Develop and implement programs to reduce material costs through better production methods in Compounding, Casting, Coating, and Converting. Experience Bachelor's Degree in an engineering discipline or related field. 5 years' experience in a manufacturing organization. 3 years' experience in a supervisory/management experience. Understanding of a processing related environment (example: coating, roll to roll printing and extrusion concepts). Demonstrate strong leadership, team building and advanced coaching skills. Experienced in talent development ability to motivate people, assess, and develop employee skills. Demonstrated understanding of the principles and applications associated with manufacturing operations, maintenance and engineering. Excellent planning and organizational skills, with the ability to balance production and maintenance needs. Excellent interpersonal communication and listening ability. SAP experience Six Sigma, Lean Certifications a plus. Must demonstrate strong critical thinking and problem-solving skills. Excellent communication skills required (interpersonal, verbal, written, listening, presentation). Must have the ability to communicate effectively with all levels of organization and external suppliers and customers. Basic to advanced computer skills in MS Office Positive outlook, professional demeanor, with a strong work ethic, that includes attendance, organization, accuracy, attention to detail, good judgement, and discretion. Personally guided by, espouses, communicates, works with, and through, values of integrity, excellence, inspirational, teamwork and accountability

The Manufacturing Manager is an integral member of Clark Pacific's operations leadership team. They are instrumental in executing continuous improvement initiatives with minimal oversight. The Manufacturing Manager will enhance manufacturing capabilities throughout the department and safely deliver on-time and on-budget projects with exceptional quality. Onsite: Adelanto, CA Salary: $130,000-$150,000 Essential Duties and Responsibilities Reasonable accommodations may be made to enable qualified individuals to perform the essential functions. Exercise a high level of professionalism and confidentiality when working with staff, projects and proprietary information. Engage in a broad spectrum of projects with impact throughout the manufacturing process to identify, address, improve, and sustain operational effectiveness and efficiency. Develop a culture of creativity and accountability in project teams, solve problems in new ways while keeping organizational commitments; establish appropriate cadence for reviews to maintain progress, resolve issues, all while maintaining an agile and adaptive working style promoting initiative, accountability, and quick iteration learning and revision. Analyze internal MFG data and trends to inform decision making and action plans. Secure buy-in from key internal stakeholders through effective and efficient communications and relationships. Utilize agile teams with cross-functional resources, form teams and project groups to address opportunity areas. Identify succession planning and developmental opportunities for emerging operational leadership; activate professional development and stretch assignments to foster a learning culture that readies talent for a growing business. Implement enhancements to capital equipment that further the Company's position as a leader in prefabricated building products, present business cases, where appropriate, for automation and new equipment investments. Challenge and voice relevant concerns in a constructive manner; coach and teach others on the team to engage constructively in meetings and encourage vibrant discourse. Develop and mentor staff through on-boarding, open communication, learning, and development opportunities; build and maintain employee morale and motivation; ensure the team is appropriately staffed with required competencies; foster a diverse and inclusive workplace. Other duties as assigned. Key Interfaces - Internal: Operations leadership Engineering Finance Human Resources Labor workforce Key Metrics and Deliverables Financial: Operations Margin; Budget performance Behavioral: Safety performance Delivery: Delivery to schedule Quality: Minimizing rework Skills and Abilities Exceptional communication skills, both written and verbal, as well as effective listening and engagement with all levels of the organization. Ability to build strong relationships and engage and motivate teams representing diverse backgrounds and viewpoints; exceptionally collaborative. Always lead with a spirit of collaboration. Excellent organization skills to drive topics with multiple stakeholders/interests. Problem solving skills that aim to remedy and prevent reoccurrence. Comfortable escalating issues while maintaining positive relationships with team members and other organizations. Passionate about Clark Pacific's vision and mission; able to promote, demonstrate, and communicate the mission, values and core competencies of Clark Pacific to others. Ability to read plans and blueprints. Able to exercise appropriate discretion when handling confidential and/or sensitive information. Display willingness and interest in stepping up into greater leadership role if the situation requires or the opportunity presents itself. Proficient with Microsoft Excel, and Microsoft Office Suite programs. Work Environment General office environment will be experienced. There will be regular exposure to manufacturing environments which may present hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. There will be periodic exposure to outside weather conditions, including extreme cold and extreme heat, wet and/or humid environments. Physical Demands  Frequent: Sitting at desk, utilizing computers/phones, standing/walking Periodic: Repetitive foot, leg, hand, arm, shoulder, and torso movements Occasional: Business travel. Bending squatting, stooping, reaching, pushing, pulling, and lifting Experience and Education Undergraduate degree (or equivalent), preferably with a specialization in business or engineering; MBA or other relevant master's degree preferred. 10+ years' experience in a manufacturing industry with demonstrable escalating scope of responsibility

We are seeking a Senior Project Engineer to join our team at a leading commercial general contractor specializing in public works projects. This role is pivotal in ensuring the successful execution of complex, multimillion-dollar builds, including infrastructure, educational facilities, municipal buildings, and other public-sector developments. The Senior Project Engineer will serve as a technical leader, coordinating between field operations, design teams, and stakeholders to deliver projects on time, within budget, and to the highest quality standards. Key Responsibilities: Manage and track RFIs, submittals, change orders, and contracts in alignment with project specifications. Ensure compliance with public works requirements, including prevailing wage, safety standards, and regulatory guidelines. Maintain accurate project records and reporting for owners, architects, and governing agencies. Review drawings, specifications, and schedules to identify conflicts, risks, and opportunities for value engineering. Support field teams with technical problem-solving and ensure quality control across all phases of construction. Oversee subcontractor performance and verify adherence to contract documents. Act as a liaison between owners, architects, engineers, and subcontractors to ensure alignment and resolve issues promptly. Prepare and deliver progress updates, meeting minutes, and project status reports to stakeholders. Provide guidance to junior engineers and project staff, fostering professional growth and technical excellence. Collaborate with project managers and superintendents to drive efficiency and maintain project momentum. Qualifications: Bachelor's degree in Civil Engineering, Construction Management, or related field 2+ years of experience in commercial construction, with a strong background in public works projects preferred. Proficiency in Procore, AutoCAD, Microsoft Office Suite or similar software. Strong understanding of public contracting processes, regulatory compliance, and quality assurance. Excellent communication, organizational, and leadership skills.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

**Summer 2026 Intern - Manufacturing Engineering** As a **Summer 2026 Intern - Manufacturing Engineering** in **Victorville** , **CA** at Keurig Dr Pepper (KDP), you will be a part of the beverage revolution. We are committed to innovation, sustainability, and excellence in everything we do. We are seeking a motivated and detail-oriented Engineering Intern to join our team for a hands-on learning experience. This internship offers the opportunity to work alongside experienced engineers on real-world projects that support our manufacturing, packaging, and sustainability goals. **Shift/Schedule:** + The KDP 2026 Summer Internship Program will run from June 1 - August 7, 2026 + Full-time; 40 hours per week + Monday-Friday + 8:00am until 5:00pm + In-Person in our **Victorville, CA** facility **As a Manufacturing Engineering Intern you will:** + Assist with data collection, analysis, and reporting for ongoing engineering projects. + Support process improvement initiatives to enhance efficiency, quality, and safety. + Participate in equipment troubleshooting and root cause analysis. + Help develop and update standard operating procedures (SOPs) and technical documentation. + Collaborate with cross-functional teams including operations, maintenance, and quality. + Contribute to project planning, execution, and follow-up activities. **Elements of the KDP Internship Program include:** + Engaging and partnering on innovative projects to gain experience in a challenging, cross functional team environment + Participate in meet & greets and lunch & learns with KDP executives and other organization leaders + Receive professional development training such as networking, professional skills development and presenting + Be paired with a mentor to enhance your knowledge of other parts of the business and build your network + Complete a project from start to finish and present it and your takeaways to your team, department vice president and other KDP stakeholders **Total Rewards:** + $31.00/hour + Paid bi-weekly + $2,500.00 Sign-on Bonus, paid within first 30 days of employment **Requirements:** + Must be an undergraduate currently enrolled in a full-time academic program from an accredited college or university, majoring in Supply Chain, Engineering, Material Sciences, or another related field + Available to work 40 hours per week (M-F, 8am-5pm) + Excellent organizational skills and attention to detail with a demonstrated ability to manage multiple projects, prioritize requests, and meet deadlines + Strong communication skills including excellent listening, written, and verbal abilities + Ability to work cross-functionally, be independently driven, and a self-starter + Strong skills in Microsoft Excel, SAP, and PowerPoint **Please note** : This position is limited to persons with permanent right to work in the United States. We incorporate HireVue, an automated interview tool, into our campus recruitment process. Please visit this link (************************************************** to learn more about HireVue and how to prepare. *We recommend checking with your campus career center for additional preparation resources such as InterviewStream, Big Interview and more. **Company Overview:** Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partners brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. **A.I. Disclosure:** KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to **************** . Keurig Dr Pepper is an equal opportunity employer and affirmatively seeks diversity in its workforce. Keurig Dr Pepper recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law.

Career-defining. Life-changing. At iRhythm, you'll have the opportunity to grow your skills and your career while impacting the lives of people around the world. iRhythm is shaping a future where everyone, everywhere can access the best possible cardiac health solutions. Every day, we collaborate, create, and constantly reimagine what's possible. We think big and move fast, driven by our commitment to put patients first and improve lives. We need builders like you. Curious and innovative problem solvers looking for the chance to meaningfully shape the future of cardiac health, our company, and your career About This Role: Position Summary We are seeking a motivated and detail-oriented Manufacturing Engineer Intern to join our team in a Class II medical device manufacturing facility. This internship provides hands-on experience in production process support, equipment qualification, and continuous improvement within a highly regulated environment. The intern will work closely with manufacturing, quality, and engineering teams to ensure safe, efficient, and compliant production operations. This internship is a 6-month term position with flexible scheduling to accommodate academic commitments, and may be either part-time or full-time. Key Responsibilities * Provide day-to-day support for manufacturing operations, including troubleshooting equipment and process issues. * Assist with equipment qualification (IQ/OQ/PQ) and process validation activities to ensure compliance with FDA QSR (21 CFR Part 820) and ISO 13485. * Participate in continuous improvement projects to improve process efficiency, yield, and quality. * Help develop and update standard operating procedures (SOPs), work instructions, and manufacturing documentation. * Support new product introduction (NPI) activities, including production line setup and process development. * Assist with capacity analysis, workflow optimization, and layout improvements. * Collaborate with quality engineering on nonconformance investigations, root cause analysis, and corrective/preventive actions (CAPA). * Follow Good Documentation Practices (GDP) and maintain compliance with environmental health and safety (EHS) protocols. Qualifications Required: * Currently pursuing a Bachelor's or Master's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related field. * Strong problem-solving and analytical skills. * Ability to work collaboratively with cross-functional teams. * Effective written and verbal communication skills. Preferred: * Coursework or experience in lean manufacturing or Six Sigma methodologies. * Exposure to regulated manufacturing environments (medical device, aerospace, automotive, etc.). * Familiarity with manufacturing equipment, assembly processes, or automation. * Experience with CAD software for fixture/tooling design and manufacturing layouts. * Proficiency in Microsoft Office; familiarity with data analysis tools (Excel, Minitab, etc.). Learning Outcomes By the end of the 6-month internship, the student will have gained: * Practical experience supporting day-to-day manufacturing operations in a regulated industry. * Understanding of equipment qualification, process validation, and compliance requirements. * Skills in process optimization, documentation, and cross-functional collaboration. * Exposure to lean manufacturing principles and continuous improvement techniques. Work Environment & Physical Requirements * Work is performed in both office and controlled manufacturing areas. * Requires use of personal protective equipment (PPE) when on the production floor. * Ability to lift up to 25 lbs and stand for extended periods during process observation or equipment support. Location: Orange County Actual compensation may vary depending on job-related factors including knowledge, skills, experience, and work location. Estimated Pay Range $30 - $40 per hour As a part of our core values, we ensure an inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws. iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at ********************* About iRhythm Technologies iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all. Make iRhythm your path forward. Zio, the heart monitor that changed the game. There have been instances where individuals not associated with iRhythm have impersonated iRhythm employees pretending to be involved in the iRhythm recruiting process, or created postings for positions that do not exist. Please note that all open positions will always be shown here on the iRhythm Careers page, and all communications regarding the application, interview and hiring process will come from a @irhythmtech.com email address. Please check any communications to be sure they come directly from @irhythmtech.com email address. If you believe you have been the victim of an imposter or want to confirm that the person you are communicating with is legitimate, please contact *********************. Written offers of employment will be extended in a formal offer letter from an @irhythmtech.com email address ONLY. For more information, see *********************************************************************************** and *****************************************

Job DescriptionDescription: RxSight is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world's first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company's mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: The Manufacturing Injector Cleanroom Lead reporting to the Injector Cleanroom Supervisor will focus on fully understanding the company's technology and the processes necessary to manufacture it. With an emphasis on understanding process requirements, timing, cadence, training, available talent and application in real-time manufacturing. After training on manufacturing procedures, the Injector Cleanroom Lead can coordinate the execution of all processes to maintain production flow to meet company production quotas, timelines, and quality standards. The Injector Cleanroom Lead performs planning, coordination, and organization of daily manufacturing activities. Responsibilities include LAL packaging, accessories as well as special adhoc projects relating to manufacturing. A critical component of this position is maximizing the LAL sterile loads both from a maximum quantity and timing standpoint. Direct communication and support with supervisor. Requirements: ESSENTIAL DUTIES AND RESPONSIBILITIES: The Injector Cleanroom Lead will interact with the other functions including but not limited to Engineering, Quality, Chemist and R&D. It is expected that this individual will have the depth and breadth of experience to contribute to the oversight of the overall manufacturing of the LAL lenses. The Manufacturing Injector Cleanroom Lead will interact with the other functions including but not limited to Engineering, Quality, Warehouse and Planning. It is expected that the lead will have the depth and breadth of experience to contribute to the overall processing of injectors and cartridges. The lead must complete the work with the highest Quality standards possible within the allowed time given to maintain the highest efficiencies. Coordinates and communicates the execution of the following activities, to meet production goal timelines: Oversees and supports the execution of: MICA III Cleanroom Activities: Component Cleaning & Inspection ERP system (QAD) work order data entry and closure MICA II Activities Micro-Abrasion Abrasive Sieving Cartridge Label Production MICA I Activities Component Assembly Component Sealing Packaging Assembly The Lead may also be certified to train in the above activities. Is responsible for collaborating and publishing a high-level weekly task plan for manufacturing activities. Coordinates training of personnel to meet production goal timelines. Coordinates production assistance in validation protocols, execution. With guidance from engineering, perform tests, gather test data and records results in accordance with manufacturing requirements. Support process improvement initiatives to enhance production efficiency, as well as ensure business continuity and regulatory compliance. The Injector Cleanroom Lead may also be certified to train in the activities. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: Past Medical Device Packaging Experience. Demonstrated ability to develop and implement Processes. SUPERVISORY RESPONSIBILITIES: This position has a large team of Injector Cleanroom Associates with varying skill levels. EDUCATION, EXPERIENCE, and TRAINING: Three to five years related experience and/or training; experience in medical device packaging. Training to be completed per the training plan for this position as maintained in the document control system. The training requirements on TRN-10007 Insider Trading Policy, TRN-10008 Global Anti-Bribery and Anti-Corruption Policy and TRN-10009 Code of Business Conducts and Ethics must be diligently completed within 30 days from the hiring date and on an annual basis. CERTIFICATES, LICENSES, REGISTRATIONS: This job does not require certification, licensing, or registrations aside from the training and certification provided by RxSight. COMPUTER SKILLS: Baseline skills with Microsoft office applications (Word, Excel, Outlook, Teams), online spreadsheets (Smartsheet) and ERP system software (QAD) preferred. Notice to Staffing Agencies and Search Firms: RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight's Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances.

About Our Client: Accepting no less than the absolute best, our client has climbed to the top, gaining a reputation for both excellence and satisfaction. Working at this company will give you the opportunity to work with some of the top technical professionals in the industry who are bringing cutting-edge products to forefront. Offering results-driven people a place where they can truly make a difference on a daily basis, this is an opportunity you will not want to miss! Key Responsibilities: Recommending and implementing improvements to production processes, methods, and controls. Coordinating the manufacturing launch of new or revised products. Providing mentorship to team members to enhance their skills and performance. Leading projects related to tooling design and process development. Ensuring product and process quality by designing test methods, testing finished products, and performing process capability studies. Creating and approving product drawings and documentation to ensure accuracy and compliance. Establishing and performing verification and validation activities, including design verification testing, process validation, packaging validation, and shelf-life studies. Preparing product and process reports by collecting, analyzing, and summarizing test data. Evaluating and solving production problems to maintain efficiency and quality. Representing manufacturing in cross-functional meetings to facilitate collaboration. Ensuring new equipment and tooling meet process validation requirements according to established procedures. Targeting and implementing cost reduction initiatives to improve profitability. Training employees on current and new manufacturing processes to ensure compliance and skills development. Qualifications: Bachelor's degree in Engineering, Manufacturing, or a related field. Prior experience in manufacturing support roles in the medical device or healthcare industries. Relevant experience supporting process improvement and new product introductions. Proven ability to support manufacturing processes or projects. Strong understanding of process improvement, continuous improvement, and cost reduction initiatives. Experience in supporting NPI (New Product Introduction) and equipment/process launches. Proficiency with computer skills including Word, Excel, and SolidWorks Knowledge of medical devices, healthcare, or vascular device manufacturing. Familiarity with process development and equipment support. Experience with Vascular or Neurovascular product lines. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Job DescriptionDescription: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Manufacturing Engineer - Satellite Structures As a Manufacturing Engineer specializing in Satellite Structures, you will lead project management activities while collaborating closely with customers and production teams to ensure program success. Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. Primary Responsibilities: Manage schedules, resources, and deliverables for complex composite manufacturing projects. Drive program execution from planning through delivery, ensuring alignment with customer requirements and budget. Support secondary activities in design, manufacturing, quality assurance, tooling, and materials as needed. Frequent customer communication/interaction Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting andimportant work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer. Requirements: B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. Knowledge of Advanced Fiber-Reinforced and/or Aluminum Honeycomb Composites and associated manufacturing methods. Ability to operate in a fast-paced environment and contribute immediately upon hire. Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee.)

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Staff Manufacturing Engineer Location: Irvine, CA on -site Position Description: The NPI Manufacturing Engineer will play a key role in transitioning new products from design into full -scale or Low-Rate production. This role requires a multidisciplinary engineer with both electrical and mechanical expertise, capable of bridging design intent with manufacturing reality. The NPI Manufacturing Engineer will develop and release work instructions and routers, design and implement jigs and fixtures for production and testing, and partner closely with design engineering, supply chain, and production teams to ensure smooth, efficient, and scalable product launches. Required Skills/Qualifications: • 5 + years of industry experience in Manufacturing Engineering • Strong foundation in both mechanical and electrical engineering principles. • Hands-on experience developing detailed work instructions, standard operating procedures, and manufacturing routers. • Proficiency in designing and building production and test jigs/fixtures. • Demonstrated ability to support DFM (Design for Manufacturability) and DFT (Design for Test) activities. • Experience in troubleshooting assembly and test processes, resolving production issues quickly and effectively. • Experience in setting up work area with high efficiency workflow for low and high-volume production. • Strong communication skills to interface across engineering, manufacturing, and quality teams. • Proficient with CAD tools (SolidWorks preferred). • Familiar with ERP/MRP systems for router and BOM management. Preferred Skills/Qualifications: • Prior experience with aerospace or defense manufacturing. • Knowledge of IPC standards and aerospace/defense quality standards (AS9100, ISO 9001). • Familiarity with PCB assembly, harness builds, and electromechanical assemblies. • Experience in Lean Manufacturing, Six Sigma, or similar continuous improvement methodologies. • Hands-on shop floor experience with prototype builds and process validation. • Exposure to automation or semi-automation in assembly/test environments Education: • Bachelor's degree in mechanical, Electrical, Manufacturing Engineering, or related field. • Equivalent experience may be considered in lieu of degree. Clearance Level Required: NO Travel: 10% Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment or warehouse. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must have the ability to stand, climb, occasionally lift a minimum of 25 lbs. • Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine • Involves movement between departments, floors, and worksites to facilitate work. • May be performing physical activities including, but not limited to, heavy lifting and moving of items, climbing in and out of equipment, crawling, and working outdoors Other Requirements: It is an essential requirement for the person in this role to have a legal right to work in the United States and be eligible to obtain any required Export Authorization and DoD Clearance. Salary: $120,000-$157,000 annually Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability. DZYNE provides paid time off and paid holidays. Additionally, DZYNE offers a 401K plan with an employer match. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment.

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Qualifications Ensures compliance with GMP's and internal protocol. Uses appropriate statistical support and Design of Experiments (DOE) when developing recommendations. Equipment and Fixturing: Determine specific requirements of manufacturing operation in order to specify equipment, fixturing, and process parameters. Collaborate on design with suppliers to fulfill equipment and fixturing requirements. Qualification and Validation: Develop plans to evaluate process repeatability and stability through equipment qualification and process validation. Applies six sigma methodology as appropriate. Leadership: Lead projects/studies in operations related programs including product iterations, cost reduction programs, process changes across product lines and manufacturing layout synergies. May lead work of lower level engineers and / or technicians and provide performance input to reviewing manager. Additional Information If you are interested and want to apply, Please contact: Sagar Rathore ************ ******************************

About ITT: ITT is a leading manufacturer of critical components for harsh environments that serves fast-growing end markets in flow, aerospace and defense, energy and transportation. Building on our heritage of innovation, we partner with our customers to deliver solutions to the key industries that underpin our modern way of life. Headquartered in Stamford, CT, we have more than 11,700 employees globally with operations in ~40 countries and sales in more than 125. At our core is our engineering DNA, with 1,280+ engineers, 1,700+ active global patents and ~51 manufacturing locations. Our businesses are organized in three distinct segments, each based around our core engineering DNA: Industrial Process: A global leader in centrifugal and twin-screw pumps and engineered valves for chemical, energy, mining, and industrial applications. Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Bornemann, Habonim, Engineered Valves, Rheinhütte Pumpen and Svanehøj. Motion Technologies: A global leader in brake pads (ICE and electrified brake pads) and shock absorbers (energy absorption solutions) for transportation applications. Our leading brands include Friction Technologies, KONI and Axtone. Connect and Control Technologies: A leader in critical applications for the aerospace, defense and industrial markets, including harsh environment connectors and control components. Our leading brands include ITT Cannon, Enidine, Aerospace Controls and kSARIA. Position Summary Major(s): Mechanical Engineering, Electrical Engineering, Junior year desired Internship Schedule: May - August 2026, full-time, 40 hours per week About the experience: The Manufacturing Engineering ITT Cannon intern will have the opportunity to work for the founding and most storied aerospace and defense electrical connector manufacturer in North America. They will obtain first- hand experience in the design and validation of electrical connectors used in the harsh environment military and aerospace environment. The intern will be guided and mentored by experienced design engineers throughout the process, ensuring they have a meaningful and productive experience. Essential Responsibilities Participate in all design stages of a specific harsh environment electrical connector development project including: Interpreting customer design input requirements. Including regulatory and environmental constraints in order to develop scope of work and estimate project hours and project schedule Participate in early-stage concept development, including designing and creating preliminary 3D CAD models. Present design concepts to engineering department as part of Preliminary Design Review Perform design changes based on team feedback on selected final design concept. Finalize 3D CAD model and generate 2D CAD drawings of selected design. Work with procurement to select vendors, receive quotations, and procure prototypes of selected design. Create Design Validation Test Plan for selected design Work with ITT Cannon internal engineering lab and possibly external labs to observe testing set up and provide technical assistance as necessary. Interpret design validation test results to determine if design changes are necessary. Work with Engineering Documentation to release final design. The intern will be guided throughout the design project by engineering team members but will be able to be a full participant in the design process. Safety is a core value at ITT. Our employees understand and follow all ITT safety policies and procedures, participate in workplace inspections, safety training, and in the development of job safety analyses. Position Requirements Currently enrolled in a Mechanical Engineering or Electrical Engineering program (BS/MS/PhD), in good standing Knowledge of basic mechanical and electrical design principles. Knowledge of metals, plastics, and rubber materials helpful, but not required. Knowledge of designing for CNC machining and injection molding preferred Knowledge/experience in CAD, Word, Excel, and PowerPoint Must continue enrollment in degree program upon completion of the internship This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Equal Pay Act Statement We aim to pay our ‘ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based not only on ‘what' they accomplish, but also on ‘how' they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. Specific benefits are dependent upon whether or not the position is part of a collective-bargaining agreement. The salary offered to a candidate is based several factors such as candidate experience and qualifications, location, as well as market and business considerations. Equal Pay Act Range The hourly range for this role is $22.69 to $33.85. Not ready to apply? Connect with us for general consideration.

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

This role is with Anheuser-Busch. Anheuser-Busch uses RippleMatch to find top talent. Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? SALARY: $25 per hour + housing & travel stipends based on eligibility SHIFT: Rotating shifts, including nights & weekends COMPANY: Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That's right, over 100 of America's most loved brands, to be exact. But there's so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? ROLE SUMMARY: Our University Programs are crafted to fast-track the careers of future leaders, allowing current students to gain exposure to a variety of roles and challenges in our Brewery and Manufacturing Operations. We believe in learning by doing. We value curious and ambitious people who are open and willing to embrace opportunities in different locations across our company. If this sounds like you, then we encourage you to apply to our Supply (Brewery & Manufacturing Operations) Internship. In your internship, you will have the opportunity to have an in-depth exposure to our Brewery and/or Manufacturing Operations and obtain relevant experiences right from the start. The internship takes place over the course of 10-weeks; however, we are flexible to adjust as necessary based on the external environment and business need. Throughout the program, Supply Interns will gain an in-depth view of the manufacturing side of the business while experiencing either the corporate headquarters, the Supply (Brewery) or Can Plant Operations (MCC) organizations, as well as flexing creative and analytical muscles through project work. Interns can be placed in various different areas of the Supply business; from working in our Brewing Department where they will have close ties to the process in which BEER is made, our Packaging Department to work with how the BEER is packaged in cans bottles or kegs, our Technical Operations group to work with teams on how the cans are made, or you may have the opportunity to work on our Corporate Team and help implement an initiative for process improvements across our Supply locations. JOB RESPONSIBILITIES: Bring your authentic self to work every day, lead with humility and drive top performance in a fast-paced industrial manufacturing environment. As an intern you will be assigned project(s) that will result in process improvement and be responsible for reporting on deliverables to senior leaders of the company. Use Lean Manufacturing techniques to accomplish tasks within project scope Shift work may be required to understand the full scope of the project. Train and gain a full understanding of the process your project focus will be on Build relationships with operators and technicians in respective areas for aid in projects Development opportunities to help boost skillset and build long-term leadership potential. Upon successful completion of the intern, you will be given the opportunity to present your final project(s) and results to our members of the Supply leadership team. JOB QUALIFICATIONS: Current university student with a GPA of 3.0 or greater. A background in Engineering or Science is preferred, but all majors are accepted. Geographical & Functional mobility - open to experiencing different functions and locations across the U.S. for this internship. Our breweries are 24/7 - 365 day a year facilities which requires alternating shift work. Must have flexibility to work varying shifts including weekends, holidays, & overtime based on business need. Must have the ability to walk up and down elevated catwalks and stairs, stand for long periods of time, and work in all environmental conditions including extreme temperatures. Ability to leverage data and insights to provide effective solutions to complex problems. Can demonstrate leadership capabilities in previous work experience and/or extracurricular activities. Self-motivated to drive results and deliver above and beyond expectations. Ability to collaborate, be an active listener, seek diverse opinions and input from others, and foster an inclusive environment. Embraces ambiguity and thrives in a fast-paced environment. Able to effectively manage several projects and teams at once, while being agile in the face of setbacks and change. Questions the status quo, seeks opportunities to improve processes, not afraid of change and willing to take calculated risks. As a general rule, the Company does not offer practical training positions for F-1 visa holders nor sponsor individuals for purposes of obtaining temporary work visas (e.g., H-1B) or permanent residency (“Green Cards”). Individuals who require sponsorship will be removed from the selection process. WHY ANHEUSER-BUSCH: At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale.

TITLE: MANUFACTURING ENGINEER CLASSIFICATION: Exempt REPORTS TO: Technical Manager SUMMARY/OBJECTIVE Plans and designs manufacturing processes in the industrial plant. Maximizes efficiency by analyzing equipment layout, workflow, assembly methods, and workforce utilization. Determines parts and tools needed to achieve manufacturing goals. Conduct oneself according to product or project requirements. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. * Safety: Ensures all designs, processes, and practices are safe for all levels of use. * Designs, implements and controls the launch of new products and/or processes * CAD drawings: Controlling, Creating, and Understanding blueprint reading. * GD&T schemes * CNC programming verification a plus * Manufacturing process improvement projects: (DMAIC/DMEDI) Define the problem, Measure current baseline, Analyze/Explore to determine root cause/solutions(s), Improve current state to achieve project goals and Control improved process. * Ensures Maximized Production efficiencies: Set up times, machine utilization, OEE, Process Op times, and SD of all. * Process improvement utilizing Engineering (Scientific Method), Six Sigma Methodology (preferred), and Quality tools to improve Quality, OEE, and Cycle time. * SPC: Implement and maintain SPC at key points to identify improvement opportunities and process stability * SPC: Function as a Subject Matter Expert, mentoring staff of all levels. * Initiate & participate in manufacturing and product meetings as needed * Prepares and presents on processes, products, or other topics as deemed necessary by management, or as needed to complete personal project(s) or goals * Owns production process including Design, Improvements, SOPS, Work Instructions, OEE, Quality * Performs a variety of tasks as needed to achieve goals and objectives. * Relies on experience and judgment to plan and achieve goals. * A certain degree of creativity and latitude is required to achieve goals. * Must be physically present with regular and dependable attendance. * IS0-9000 Knowledge including but not limited to: o Non-conforming material reports including material review and root cause analysis. o Corrective action implementation and verification o Implementation & Verification of production documentation o Warranty issues: product returns and reworks * Lean Six Sigma experience is a plus. COMPETENCIES * Computer literate * Proficient in MS Office, Project, and Excel * Programming as needed to complete projects * Microsoft Project * Minitab (statistical software) * CAD/CAM * Basic CNC Programming and Code * Ability to operate CNC equipment * Mechanical and Technical capacity * Problem solving/analysis, ability to determine root cause and corrective action of a given problem. SUPERVISORY RESPONSIBILITY None Indirectly oversee all production personnel, ensuring product conformance and shop safety. WORK ENVIRONMENT This job mainly operates in an office setting, however, working on the shop floor may also be necessary. Routine use of standard office equipment such as phones, photocopiers, filing cabinets, and fax machines. This position requires prolonged computer use. The employee is exposed to shop floor machinery atmospheric conditions such as fumes or airborne particles, noise, extreme weather, vibration, and moving mechanical parts. Note, personal protective equipment (PPE) is required when entering the plant including ear plugs, safety glasses, and steel toe boots. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee frequently is required to sit; walk; stoop; bend; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to kneel, and crouch. This position requires the ability to occasionally lift up to 50 pounds. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position. Days and hours of work are Monday through Thursday, 7:00 a.m. to 5:00 p.m. Occasional evening and weekend work may be required as job duties demand. TRAVEL Little to no travel is expected for this position. REQUIRED EDUCATION AND EXPERIENCE * Bachelor's degree in manufacturing/industrial engineering * 2+ years of related field experience * Familiar with standard concepts, practices, and procedures with aluminum casting and machining field. * Related experience and/or Degrees may be considered in lieu of required education and experience. PREFERRED EDUCATION AND EXPERIENCE * Master's degree in manufacturing/industrial engineering * Lean Six Sigma Blackbelt * 5+ years of related experience ADDITIONAL ELIGIBILITY QUALIFICATIONS None required for this position. AAP/EEO STATEMENT Edelbrock is proud to be an equal-opportunity workplace and an affirmative-action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or any other characteristic. We are an Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Manufacturing Intern - FloridaJob Locations: Groveland, Miami, Jacksonville Interns spend the summer working directly on high impact projects within one of our manufacturing departments. Interns work in a fast-paced, innovative environment where they will be asked to be a key part of our operations. During this 10-12 week internship, participants are encouraged to think outside the box and use a continuous improvement mindset to approach projects and come up with solutions. Interns gain hands on experience in work related to their field of study. Essential Functions Rotate through multiple areas of the manufacturing plant to gain an overall understanding of the manufacturing process. Provide support to plant team members to gain hands on experience with production methods, machines, and processes. Assist with research on new and existing projects and support major decision making. Receive intellectual and creative opportunities to tackle a problem and develop proposed solutions. Attend department meetings and action plan based on feedback. Learn to collaborate and communicate across all levels of the organization. Create a presentation on internship experience, projects, and outcomes and present to department leadership. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: Current Junior/Rising Senior pursuing a Bachelor's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$0.00 - $0.00 / Hourly Benefits *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview We are seeking a highly motivated Manufacturing Test Engineer to join our Powertrain Manufacturing team. This role focuses on the development, implementation, and continuous improvement of in-line and end-of-line testing for electric drive units (EDUs), stators, and rotors in a production environment. The engineer will work closely with cross-functional teams including design, quality, and production to ensure testing systems are robust, reliable, and aligned with manufacturing and product performance requirements. What You'll Do: Define and manage test specifications, parameters, and acceptance criteria to ensure functional and quality compliance. Analyze test data, diagnose failures, and implement root cause analysis and corrective actions. Drive continuous improvement of testing processes through data-driven analysis, process optimization, and feedback loops with manufacturing engineering and quality teams. Train maintenance and production teams on test equipment operation and troubleshooting procedures. Lead the end-to-end sourcing and implementation of a high-volume electric drive unit EOL test rig, including scope definition, RFQ generation, vendor evaluation and selection, and technical/commercial alignment with internal stakeholders. Oversee vendor management through design, build, FAT/SAT, and on-site commissioning, ensuring successful integration and production launch at the manufacturing facility with full adherence to safety, quality, and throughput requirements. Who You Are: Bachelor's degree in Electrical Engineering, Mechanical Engineering, Mechatronics, or related field. 5-10+ years of experience in test engineering, preferably in electric powertrain or automotive manufacturing. Proven experience with specifying, sourcing, and launching automated test equipment in a high-volume environment. Experience with test automation, data acquisition systems, and industrial instrumentation. Knowledge of statistical process control (SPC) and design of experiments (DOE) methodologies. Strong analytical and problem-solving skills; ability to work in a fast-paced, collaborative environment. Key Benefits & Perks: Comprehensive Health, Dental & Vision (HDV) - 100% employee covered Early-stage Stock Options Robust Retirement Savings (401k, HSA, FSA) Generous Paid Time Off (PTO) & Parental Leave Annual Vacation Bonus Wellness & Fertility Benefits Cell Phone Stipend Complimentary Meals & Stocked Kitchens California Pay Range$120,000-$150,000 USDEqual Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

Compensation Salary: $85,000-$95,000 + Hiring Bonus At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our Ontario location. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Core Values: Determination: Meet challenges head on! Innovation: Always look for better! Well-Being: Seek the success, health and happiness of all! Benefits: Competitive compensation, being paid on a weekly basis. Health, Dental and Vision Insurance with the options of using Kaiser and VSP for vision! Medical FSA Dependent Care FSA Employer paid life insurance paid by Clark Pacific Voluntary Ancillary Benefits such as Critical Illness, Accident Insurance and Whole life insurance. 401k matching 100% of the first 3%, then 50% of the next 2% *Benefits will be subject to a waiting period* Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #LI-MV1