Manufacturing engineer jobs in South Hill, WA

Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity. As the Equipment Engineer for an Equipment Group at Amazon Leo, you will be directly responsible for the technical activities in driving improved equipment uptime, availability, and capability improvement for equipment that supports manufacturing our next generation spacecraft. You'll be responsible for the full equipment lifecycle for key integration and test equipment, from requirements specification, design concept, sourcing, integration, qualification, pilot operation, long term OEE improvement projects, and ultimately end-of-life services associated with the equipment you support. You will leverage your expertise in electro-optical systems development & maintenance to ensure smooth integration & high system availability. You'll use data & analysis to produce preventative maintenance programs, troubleshoot protocols, critical spares plans, etc. You'll be a key animating force in the increase in production capacity through vision & execution of capital investment for production scaling & automation of additional equipment as required. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Develop system requirements, and partner with development groups to drive detail design of new equipment • Participate in sourcing plans for complex equipment (COTS & custom) • Lead equipment integration & site acceptance testing • Develop troubleshooting, preventative maintenance, and spares plans for equipment • Support 2nd line escalation of critical equipment downtime • Specify & develop facilities interface requirements (power, network, space, LN2/GN2, PCW) Train & support equipment technicians responsible for routine maintenance, troubleshoot, etc. BASIC QUALIFICATIONS- Experience with prototyping and implementation - Bachelor's degree in electrical engineering or equivalent - Experience reading & developing rack elevation diagrams, wiring diagrams, GD&T etc. - Experience with Programmable Logic Controller (PLC) & Data Acquisition (DAQ) Systems PREFERRED QUALIFICATIONS- Experience in the design of complex mechanical products and equipment at volume - Experience developing equipment maintenance protocols, including Preventative Maintenance activities, Troubleshooting Runbooks, Spare Equipment Plans, etc. - Experience with Fiber Optic Assemblies, Optical Test Systems, and Optical Metrology Equipment Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Qualifications: Bachelor of Science in Mechanical, Manufacturing, Industrial, Electrical, or Aerospace Engineering. 7 or more years direct manufacturing and manufacturing engineering experience. Understanding of engineering fundamentals for mechanical design and manufacturing including solid understanding of GD&T. Proficiency in business and engineering software (CAD, PLM, Scheduling, MSOffice, Windchill, etc). Ability to develop processes compliant to industry quality systems such as AS9100. Attentive and responsive with strong verbal and written communication skills. A demonstrated ability to work cooperatively with teams of diverse skills across large geographic distances. Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion. Must be physically able to: support production floor activities; climb stairs and work in small areas Desired: Aerospace/Launch vehicle experience. Broad experience in hardware manufacturing: welding, assembly, integration, instrumentation, cleaning, packaging, fabrication, machining, etc. Experience with Manufacturing Execution Systems/Software and processes Knowledge of fabrication processes, integration processes, and configuration management systems Understanding and applied experiences in Lean Manufacturing Familiar with applicable industry standards

KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients. Key Responsibilities: Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations. Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors. Conduct site investigations, condition assessments, and provide design and construction support. Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems. Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Preparation and review of reports. Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met. Edit and prepare design specifications. Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned. About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset. Minimum of 7-15 years of experience in mechanical engineering. Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire. Previous consulting experience is preferred, but not required. Excellent verbal and written communication skills are required. Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously. Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information. Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred. The salary range for this position is $110,000-$160,000 Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. *Please help us learn more about you, your professional goals, and why this job is a good fit for you by submitting a cover letter along with your resume. We highly encourage all applicants to provide a cover letter.*

Engineering Design & Testing Corporation (“EDT”) is a professional services organization providing forensic engineering, technical consulting, fire investigation, risk mitigation, and associated services across the United States. Founded in 1978, EDT brings more than 45 years of experience providing objective civil / structural, mechanical, and electrical forensic engineering analysis, accident reconstruction services, and expert witness and litigation support to industrial, manufacturing, insurance, and legal professionals requiring comprehensive, unbiased, technically sound opinions and reporting with a wholistic perspective. As an Employee-Owned company, our team of highly qualified experts are vested in delivering cost-effective, responsive, and reliable professional services and deliverables to our clients. Position Summary: Serves as the Engineer-In-Charge (“EIC”) responsible for coordinating with clients, performing site visits, managing resources, writing reports, and setting deadlines to ensure project deliverables are submitted in a professional and timely manner. Conducts investigations involving MEP systems, mechanical devices, and various types of machinery and / or equipment, including but not limited to, HVAC systems, hydraulic / pneumatic devices, pressure vessels, combustion equipment and / or rotating equipment. Performs root cause analyses, hazard and damage assessments, repair vs. replace evaluations and cost estimates, lab and field testing of materials, and design and manufacture defect evaluations. Must be a licensed professional engineer with a thorough understanding of fundamental engineering principles along with a firm comprehension of the function and operation of a wide range of mechanical components and equipment. Provides expert judgement and forms objective, fact based, technically sound opinions and unbiased conclusions on case assignments from insurance adjusters, independent adjusters, attorneys, and other non-legal, non-insurance clients. Must be willing to travel and physically able to climb, stand, walk and kneel for extended periods of time. Is self-motivated and capable of working independently as well as in a group environment with a dedication to ethics, quality, and customer service. This is a Hybrid/Remote role. The successful candidate must reside in the Pacific Northwest. Primary Duties & Responsibilities: Working independently, while ensuring the timely and cost-effective execution of assigned cases; Serving as the primary point of contact with clients including development and coordination of case budgets, work orders, site visits, cost estimates, and associated deliverables. Maintaining contact with clients on active cases to provide status updates, including case spend and budget status, and addressing questions, needs, or concerns at least every other week, or as otherwise agreed upon; Assisting with the development and ongoing updates to the scopes of work associated with assigned cases, as necessary; Making independent decisions for assigned cases, including the selection of applicable analysis and testing methodologies and identification and selection of resources relevant to execution of the established scope of work; Managing resources for assigned cases, including both in-house and third-party sub-contractors where applicable, to meet established deadlines; Engaging other disciplines to address areas of assignments outside of your experience or expertise / discipline, where necessary; Conducting onsite investigations, testing, and gathering applicable field data on residential, commercial and industrial properties to assess damage and gather evidence of damage and / or loss; Preparation of repair and / or replacement cost estimates, as necessary; Participating in conference calls and / or in-person meetings with clients regarding investigation status and results; Preparation of forensic reports clearly detailing the observations made, documentation and data collected from onsite inspections, laboratory examinations, applicable research conducted, testing and performance analysis results, and the associated conclusions; Providing technical support and testifying as an expert witness in depositions and court proceedings, as necessary; Collaborating with clients, colleagues, attorneys and other industry professionals, as necessary; Maintaining weekly updates to case status reports and working with the Regional Engineering Manager and Chief Engineer to address any issues with clients or your assigned cases; Conducting research and keeping current with industry best practices and emerging technologies; Developing technical topics for publication, industry presentations, and both internal and external training and continuing education development; Supporting EDT's marketing and business development resources including occasionally participating in client-relations meetings, attending industry conferences, preparing marketing and technical presentations, assisting with the development of marketing materials, preparing industry blogs and white papers, and engaging with other industry professionals; Participating in EDT's mentorship program and supporting the training and development of new engineers in conjunction with the Chief Engineer and assigned Training Coordinator; Secure and maintain professional licensure (at Company's expense) in all states where conducting investigations, including remaining current on any continuing education requirements, as necessary. Key Skills & Qualifications: Strong interpersonal skills; Excellent oral and written communication skills with a proven ability to write comprehensive technical reports; Strong organizational and time management skills; Advanced analytical and problem-solving capabilities; A high degree of integrity, honesty and moral values adhering to the Professional Engineer Code of Ethics; Ability to work independently with minimal supervision, as well as within a team environment; A collaborative demeanor with the ability to work through conflict, differing perspectives and opinions, and communicate across differing backgrounds and education levels; Ability to travel out-of-town, with periodic overnight travel required; Have strong PC, Tablet and software skills, including: MS Office - Word, Excel, PowerPoint required; Adobe Acrobat DC , Bluebeam Revu , or comparable PDF software; B.S. or M.S. Degree in Mechanical Engineering required; 4+ years' experience in forensic engineering preferred, relevant mechanical engineering & design experience considered; P.E. License with NCEES registration required; Valid driver's license required; Engineering Design & Testing Corporation is an Equal Opportunity Employer

Immediate need for a talented Process Engineer III. This is a 06 Months Contract opportunity with long-term potential and is located in Redmond, WA (Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID:25-92697 Pay Range: $65 - $70/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Requirements and Technology Experience: Skills-"ORGANIC CHEMICALS", "OPTICAL MATERIALS", "PROCESS DEVELOPMENT Master's degree in Chemical Engineering, Chemistry, Materials Engineering, Mechanical Engineering, or equivalent 4 years of experience in process development. Laboratory experience in handling organic chemicals and solvents, and use of relevant laboratory equipment. Demonstrated ability to perform design of experiment (DOE) and data analysis. Excellent data handling, documentation, and organization skills Our client is a leading Social Media Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Title: Continuous Improvement Specialist Duration: 12 months (potential multi-year contract) Key responsibilities: Work cross-functionally with teams to affect department-wide performance improvement with our internal and external partners by designing and implementing processes, metrics, and programs that enhance the end-to-end customer experience Participate in listening mechanisms, to include cross-functional meetings and improvement projects related to timeliness and quality of service delivery Coordinate monthly Continuous Improvement team communication strategy, sharing successes and engaging Operators to learn about continuous improvement methodologies Analyze operations to identify key metrics and opportunities for effective business operations Lead high impact projects that require quick action to resolve employee pain points Participate in regular operational reviews and performance reporting. Includes coordinating with the necessary stakeholders, ensuring information is relevant, accurate, easy to consume, and conveys improvement opportunities Facilitate meetings while also providing feedback and insight (i.e., Voice of the Operator intake review, roadmap prioritization, etc.) Define and drive project plans in an ambiguous, fast-paced environment Work with program managers, operations leaders, and the leadership team to communicate the impact of critical business initiatives in a global setting Influence design and development of strategic processes Audit completed projects to verify sustained impact Required Qualifications: Bachelor's degree 3+ years' experience in operations leadership, business consulting, program management, or project management experience 2+ years' experience in delivering results related to quality and/or efficiency improvements Detail oriented, excellent analytical, verbal, and written communication skills, especially narrative writing High levels of integrity and discretion in handling confidential information Preferred Qualifications: Advanced degree Six Sigma Green Belt or Lean Certification Analytical experience using Control Charts, Hypothesis Testing, Regression Analysis, and other statistical tools Experience identifying, analyzing, and solving ambiguous problems with an extreme attention to detail Passion for technology, curiosity to dive deep into the suite of technical products and commitment to learning and expanding technical knowledge Able to prioritize in complex, fast-paced environment Experience in or demonstrated ability to lead people/teams without formal responsibility and interacting and building rapport with teams of all levels Strong change management and influencing skills; ability to negotiate and communicate across all levels of the organization Demonstrated experience and proficiency in effective written and verbal communication

At Mercor, we're building the talent engine that helps leading labs and research orgs move AI forward. Our latest initiative focuses on benchmarking and improving model performance and training speed across real ML workloads. If you're an early-career Machine Learning Engineer or an ML PhD who cares about innovation and impact, we'd love to meet you. ## What to Expect As a Machine Learning Engineer, you'll tackle diverse problems that explore ML from unconventional angles. This is a remote, asynchronous, part-time role designed for people who thrive on clear structure and measurable outcomes. - **Schedule:** Remote and asynchronous-set your own hours - **Commitment:** ~20 hours/week - **Duration:** Through December 22nd, with potential extension into 2026 ## What You'll Do - Draft detailed natural-language plans and code implementations for machine learning tasks - Convert novel machine learning problems into agent-executable tasks for reinforcement learning environments - Identify failure modes and apply golden patches to LLM-generated trajectories for machine learning tasks ## What You'll Bring - **Experience:** 0-2 years as a Machine Learning Engineer or a PhD in Computer Science (Machine Learning coursework required) - **Required Skills:** Python, ML libraries (XGBoost, Tensorflow, scikit-learn, etc.), data prep, model training, etc. - **Bonus:** Contributor to ML benchmarks - **Location:** MUST be based in the United States ## Compensation & Terms - **Rate:** $80-$120/hr, depending on region and experience - **Payments:** Weekly via Stripe Connect - **Engagement:** Independent contractor ## How to Apply 1. Submit your resume 2. Complete the System Design Session (< 30 minutes) 3. Fill out the Machine Learning Engineer Screen (engineering, and research use Mercor to work on frontier projects shaping the next era of AI.

Who We Are Coughlin Porter Lundeen is a civil and structural engineering firm. Focused in the Pacific Northwest, we partner with clients across markets to bring unique project visions to life. We were founded with the goal of exceeding the standards and services provided by engineering firms. And today, more than 30 years later, that vision continues to guide all that we do. Our core values are the heart of who we are and guide how we work each day. Commitment to Quality, every drawing, every detail. Creativity, from project solutions to the way we define our roles. A “Client-First” Mindset, cultivating long-term partnerships. An Empowered Team, continued learning and development. Collaboration and Respect, with our clients and within our own professional work environment. Community, supporting the causes most important to our staff and city. Description Coughlin Porter Lundeen is seeking a structural project engineer; this position involves the design and preparation of construction documents on diverse project types including a variety of building materials. As an integral member of the design process, structural engineers are challenged to develop project management skills, lead in-house design teams, and work firsthand with a diverse range of clients. Engineers are involved with every aspect of the project from design through construction. This position requires sound technical skills, strong communication skills, and a professional attitude. Minimum Qualifications BSCE or MSCE degree (MSCE Preferred) 4+ years structural design experience P.E. license preferred Physical Requirements Ability to drive as needed to client project locations (primarily in the greater Seattle area). Able to travel by airplane domestically as needed for client projects (outside the greater Seattle area), campus recruiting, conferences, etc. Requires sitting for extended periods of time at a computer, keying and reading content. Will be required to stand, reach, bend, twist, squat, and move about freely in an office environment. May need to be able to lift up to 25 lbs. Able to use office equipment such as phone, copier, printer, etc. Benefits and Compensation $92,000-$115,00 per year (depending on experience and qualifications) Additional compensation for hours worked in excess of 40 hours weekly (paid quarterly) Medical (HSA with employer contributions), dental and vision Company paid life and AD&D insurance Company funded ORCA card PTO (15 days starting) 8 paid national holidays (including 1 floating holiday) 401(k) matching Annual bonuses and profit sharing (at company discretion) Monthly health and wellness stipend Employee assistance program Additional information regarding our workplace and benefits can be found here.

Job Title: Research Engineer Duration: 12 Months W2 Contract We are seeking a Research Engineer for our team that researches new wearable AI devices and interaction models. This role combines development of interactive AI experiences and research of human behavior. Top 3 Must-Have Skills 1+ year experience developing user interfaces / interactive experiences 2+ year experience developing with C++/C# in a game engine (Unity, Unreal), Unity is preferred. 2-3+ years in Python for data analysis (numpy, scipy) Nice-to-Have Skills Familiarity with user research, behavioral experiments Familiarity with sensing technologies (IMU, EMG, cameras, microphones) Advanced degree (MS, PhD) in a related field Experience developing for AR/VR/wearables Experience using ML libraries and/or LLMs Experience w/ C++ Responsibilities Implement user interfaces for internal demos and formal user studies Work with prototype hardware and constellations of computing devices Collaborate with researchers to build data processing pipelines

About HV Engineering HV Engineering (HVE) is a mechanical, electrical and plumbing (MEP) consulting engineering firm located in Washington State, with offices in Mountlake Terrace and Spokane Valley. HVE specializes in designs for multifamily, commercial, educational, and healthcare projects. Founded in 1996, we're known for practical solutions to client challenges and hands-on involvement from experienced principals on every project. Your Role We're seeking a candidate who is a licensed PE or EIT with significant HVAC and plumbing design experience who can provide solutions to nuanced challenges, enjoys mentoring junior engineers, and who demands quality while they oversee design efforts from concept through construction. What You'll Do Coordinate with architects, contractors and other disciplines, along with internal team members to ensure fully integrated designs Perform HVAC and Plumbing load calculations, equipment selection, and code compliance reviews Conduct QA/QC on plans, specs, and reports What You Bring Professional Engineer (PE) License or Engineer In Training (EIT) certification 5+ years of experience in plumbing/HVAC design Working knowledge of IMC, UPC, Energy Code and ASHRAE Standards Proficiency in Revit, AutoCAD and Microsoft Office Strong communication, organization, and mentoring skills What We Offer We are targeting a base salary of $100,000 to $150,000, yet it is determined by several factors including education, experience, licensing, and a history of working in the Seattle area. Medical insurance, premiums covered in full for full-time employees Dental insurance, premiums covered 75% by the company SIMPLE IRA with 3% employer match Minimum of fifteen (15) days PTO, and higher for more experienced employees Eight (8) paid holidays Hybrid work (typically, one day in office per week) Please apply by submitting your resume through LinkedIn and one of our team members will be in touch. We are not engaging with third-party recruiters or agencies. Please only apply if you are submitting your own candidacy.

Pacific Pile & Marine (PPM) is a heavy civil and marine general contractor providing top-tier services along the West Coast of the United States and Canada. Headquartered in Seattle, WA, PPM specializes in diverse marine and transportation infrastructure projects, including bridges, ports, marine structures, dredging, and environmental construction. The company serves regions across Washington, Oregon, Idaho, Montana, Alaska, California, Hawaii, and British Columbia. Known for its cutting-edge industry leadership, PPM seeks motivated, team-oriented professionals to support its innovative and impactful projects. Role Description This is a full-time, on-site Project Engineer role located in Seattle, WA or Anchorage, AK. Project Engineers are responsible for performing duties in the field and directly gathering, calculating, and compiling data for the engineering and business functions of a project. It is expected the Project Engineer will provide technical engineering information to company supervision and field crews to ensure construction work complies with all engineering standards, codes, specifications, and design instruction applicable to one or more disciplines. Essential Duties and Responsibilities: Manage the measurement, review, approval, documentation, and input of project quantities. Construct the project budget from the conformed estimate, working with the superintendent and project manager to select the appropriate work activities and cost codes. Establish and maintain the project contract administration plan. Assist project manager with reviewing and preparing month‐end cost reports including the monthly Progress Statement and Job Operations Report (JOR). Assist with cost forecasting and revenue projections. Manage the project recordkeeping and correspondence functions. Maintain tracking logs for change orders, RFI's, submittals, and letters. Maintain the project daily report. Manage the preparation, review, approval, and forwarding of the project submittals. Prepare and submit progress invoices to the owner with Project Engineer / Project Manager review. Work with superintendents, project engineers, and project managers to develop a project plan to create a project CPM Schedule. Manage and maintain the project schedule. Manage the subcontract and procurement process including directing or performing the solicitation, review, and document preparation elements. Participate in the project safety process, conduct safety inspections, and contribute to weekly toolbox meetings, mass safety meetings, and safety training. Coordinate and assist in the documentation, preparation, and resolution of change orders and extra work efforts. Generate engineering feasibility studies to support planning and scheduling efforts. Assist with managing the collection, review, approval, and processing of the daily labor timesheets. Setup, control, and manage all engineering and project records/files. Provide engineering support to field and office operations. Take the lead in working with designers and/or engineers to do value engineering, material substitutions, and engineering-related constructability issues. Manage the project turnover process as it relates to punch list, quality control, commissioning, final documentation submission, and check‐out of installed systems. Qualifications Bachelor's degree in Engineering or Construction Management or equivalent combination of technical training and related experience. Demonstrated ability to implement, utilize, and manage the cost management process including quantities, cost reports, forecasting, labor reports, and documentation & recordkeeping. Ability to efficiently perform the contract administration functions including correspondence, document control, daily reports, and change orders/claims preparation. Ability to efficiently perform the project administration processes including accounts payable, accounts receivable, and subcontractor/supplier correspondence & tracking. Demonstrated proficiency to develop, analyze, and maintain complex project schedules. Demonstrated understanding of company safety philosophy and a working knowledge of the Safety and Crisis manuals. Effective communication skills, both oral and written, including the ability to compose and edit professional letters to external organizations including customer, vendor, government agencies, and subcontractors. Ability to organize and supervise individual engineering functions. A rudimentary knowledge of survey. Strong computer skills including the ability to use Microsoft products such as Word, Excel, Project, and Outlook. Ability to give oral presentations using PowerPoint. Compensation and Benefits Washington Salary Range of $79,800 to $105,000 depending on experience. Retirement Plan including up to a 4% employer match. Three weeks paid vacation per year. 14 Paid Holidays per year. Sick leave provided per WA Paid Sick Leave Law. Employees (and their families) are covered by Medical, Dental & Vision Benefits. Annual Bonus program Valid driver's license and acceptable driving record required to operate company vehicles. A pre-employment drug screen and background check will be conducted. To apply, please email your resume and salary requirements to ***********************. Pacific Pile & Marine is an Equal Employment Opportunity Employer. All qualified applicants will be considered, regardless of race, gender, or status as an individual with a disability or veteran.

Job Title SENIOR MECHANICAL ENGINEER-SW Job Type / Status Full-Time Education Bachelor's Degree Clearance Level Required Secret Job Description Job Title: Senior Mechanical Engineer This position will involve engineering and technical support required across several departments of the Naval Undersea Warfare Center (NUWC) Division, Keyport Washington: System Acceptance & Operational Readiness Department (Code 20): The System Acceptance & Operational Readiness Department plans, organizes, directs, and controls NUWC Division, Keyport's Test, Training and Evaluation (TT&E) of undersea warfare (USW) systems and operational readiness assessment support for acquisition and Fleet customers. Code 20 conducts system evaluation activities throughout all phases of the acquisition life cycle including technology development, system design, development, and production, and in-service readiness assessment. Undersea and Combat Systems Depot (UCSD) (Code 31): The Undersea and Combat Systems Depot (UCSD) provides repair services for mechanical, electro-mechanical, and electronics systems, assemblies, and components. The UCSD provides a continuum of expert level skills including evaluating electronic, mechanical, and electro-mechanical components for feasibility of repair, repair of items to customer specifications, reverse engineering, maintenance planning and engineering, obsolescence management, and application of new maintenance technologies. The Depot exists to ensure continuity of support often as the last resort source of repair for items abandoned by industry for business or technological reasons, past their technology lifecycle, or as an alternative supplier in cases of critical need. Rapid Prototyping and Fabrication Technology Division (Code 32): The Rapid Prototyping and Fabrication Technology Division provides engineering, production, and test services required to establish a cost effective and timely source of supply for systems, assemblies, technical data, and components of varying complexity. Code 32 also provides mitigation against obsolescence by establishing a source of supply, maintaining an organic manufacturing capability, and providing technical expertise and leadership. Leading edge technological advancement in areas related to rapid prototyping, fabrication, and custom engineered solutions (CES) are also a specialty. In-Service Engineering Department (Code 40): The In-Service Engineering Department plans, organizes, directs and controls NUWC Division, Keyport's efforts to ensure Fleet operational readiness through life-cycle support of combat and weapon systems. Code 40 provides In-Service Engineering Agent (ISEA) and other technical authority functions as assigned, including design, production, test, fielding, sustainment, and improvement modifications. Capabilities include systems engineering, Fleet technical support, lifecycle logistics, obsolescence management, and acquisition engineering support. Program responsibilities include submarine systems, Naval training systems, undersea warfare weapons and vehicles, and surface warfare systems. Products and services include commercial-off-the-shelf (COTS) integration and supportability, software development, technology refreshment, obsolescence management, advanced training systems, distance support, logistics support, direct waterfront support, information assurance (IA)/cyber security, and information systems. Code 40 also provides systems and project engineering leadership for assigned integrated warfare systems technical programs and project team leadership on traditional and non-traditional work assignments, including technology insertion of aircraft carrier and surface combat systems and air and surface ship acoustic sensors, standard equipment, COTS hardware and software, and supply agent projects. Job Requirements A bachelor of science degree in mechanical engineering or higher, is desired. A minimum of seven years of experience in mechanical engineering for complex systems, including design,development, integration, and test is desired. A master of science degree in an appropriate field may be substituted for two years of experience. Experience in mechanical engineering development standards and techniques including geometric dimensioning and tolerancing (GD&T) are desired. Experience with electro-mechanical components / systems, configuration management, and computer aided design (CAD) systems is desired. For example, experience with Solid Edge/Solid Works, or equivalent, risk identification and mitigation, MATLAB, LabVIEW, T&E analysis, electronics packaging design, and tooling and fixturing design. U.S. citizenship and eligibility for a security clearance required; current clearance a plus. Preferred Qualifications: U.S. Navy submarine/underwater warfare system experience a plus. The ideal candidate will have an understanding of military specifications and requirements, drawings and other documents used to support military systems. Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. MRC offers a competitive benefit plan to employees and their eligible family members that includes health, dental, vision, life, and disability plans, paid holidays, accrued leave, accrued vacation, 401K, profit sharing, as well as, any other state or federally required benefits. The hiring wage range is $ 42.00-$58.00 per hour.

Join Meta Reality Labs and help define the next generation of Wearables and Mixed Reality experiences. Our Display, Optics, Camera, Depth and Sensors team is pioneering advanced optical systems that seamlessly merge physical and digital worlds, bringing reality through cutting-edge wearable technology. In this team we work on developing breakthrough solutions for see-through and immersive systems, designing comprehensive test frameworks, characterization protocols, and metrology solutions that ensure our displays and optical components meet the highest performance standards. Our teams seamlessly transition between strategic system-level thinking and precision-focused implementation, maturing our architectures from early concepts to production-ready designs. As a core team member, you'll explore uncharted territories for next-generation wearable devices and you will collaborate closely with cross-functional teams spanning cameras, sensors, depth perception, optics, and displays, translating visions into tangible engineering solutions. Minimum Qualifications * Bachelor's degree in Optical Engineering, Electrical Engineering, Physics, or a related technical discipline * 8+ years of industry experience with a proven track record of full product development cycle in consumer electronics or similar related field * Experience and expertise in these areas or similar related technologies: optical design software, geometrical optics, wave optics, and polarization optics, optical materials, coatings, and manufacturing processes, Imaging optics design and manufacturing, display optics, optical sensing, optical system integration and testing * Technical leadership, communication, and project management skills * Problem-solving, analytical, and critical thinking skills Preferred Qualifications * Advanced degree in Optical Engineering, Electrical Engineering, Physics, or a related technical discipline * 10+ years of industry experience with 5+ years in a technical leadership or engineering management role * Experiences in Virtual Reality, Mixed Reality, and Augmented Reality industry Responsibilities * Lead cross-functional teams in the design, development, and implementation of cutting-edge optical solutions for new optics architectures, utilizing novel materials and processes * Identify, incubate, and productize optical technologies that have the potential to revolutionize the field of wearable optics * Specify key performance metrics, test methods, and test requirements for optical components and systems * Develop and maintain technical roadmaps * Interface with stakeholders and leadership to influence product roadmaps * Stay updated on industry trends, emerging technologies, and competitor activity * Manage budgets, resources, and collaborations with global vendors About Meta Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today-beyond the constraints of screens, the limits of distance, and even the rules of physics. Equal Employment Opportunity Meta is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, reproductive health decisions, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, genetic information, political views or activity, or other applicable legally protected characteristics. You may view our Equal Employment Opportunity notice here. Meta is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, fill out the Accommodations request form.

IonQ is developing the world's most powerful full-stack quantum computer based on trapped-ion technology. We are pushing past the limits of classical physics and current supercomputing technology to unlock a new era of computing. Quantum computing has the potential to impact every area of human society for the better. IonQ's computers will soon redefine industries like medicine, materials science, finance, artificial intelligence, machine learning, cryptography, and more. IonQ is at the forefront of this technological revolution. We are looking for a Staff Optical Engineer for our optical and laser systems team. As a member of the engineering organization, you'll be part of a cross-functional team whose mission is to lead IonQ on its journey to build the world's best quantum computers to solve the world's most complex problems. In this role, you will collaborate with a highly interdisciplinary team of atomic physicists, optical engineers, opto-mechanical engineers, electrical engineers, cryo-system engineers, thermal engineers, and program managers to influence, design, and build our upcoming products. You will contribute across the entire product lifecycle from conceptual design through first engineering units. You'll develop requirements, perform trade studies, and design our current and next-generation hardware for our quantum computers. Responsibilities: Work in a (small,) cross-functional project team to design, develop and build Optical and Laser systems hardware for electro-opto-mechanical assemblies Conceptualize and analyze complex opto-mechanical assemblies, create theoretical models, conduct empirical confirmation & perform computer assisted simulations. ● Work with optical and engineering team to integrate the laser and imaging hardware into the quantum computer Analyze and test product designs. Including the development of DOEs, data collection, and data analysis Provide technical support to Vendors by generating and/or reviewing bills of materials, building documentation, assembly and test fixtures, test procedures, and driving anomalies and non-conformances to closure Design optical alignment processes and evaluate optical manufacturing methods You'd be a good fit with: B.S. in Optical Engineering, Optical Design, or another relevant degree 10+ years of experience designing optical systems 10+ years of experience developing overall product architecture A broad optical background with fluency in Zemax/Code V (or equivalent) and extensive experience implementing complex tolerance models and performing sensitivity analysis. Experience developing specifications for optical/optomechanical/optoelectronic assemblies Experience developing systems and processes for optical alignment and metrology for optical elements and optical systems preferred Knowledge of precision optical/mechanical alignment tools and techniques Able to contribute to product development road maps and long-term product vision Good knowledge of optical metrology and optical manufacturing processes Excellent verbal and written communications, presentation, and documentation skills are required Excellent cross-functional communication skills and comfortable working in diverse teams. Experience with product development lifecycle, including design verification, design validation, and design transfer Demonstrated experience with industry and design best practices You'd be a great fit with: M.S. / PhD. in Optical Engineering, Laser physics, or another relevant discipline 7+ years of industry experience developing optical products In addition to all of the above, you have experience with AMO physics, low pressure/temperature material properties and/or acousto-optic devices Knowledge and experience with complex optical systems, lasers, free-space optical systems and components Experience/success in interacting with suppliers directly, collaboration with supply chain sourcing, fostering partnerships for critical development and risk reduction Extra bonus points for direct Quantum computing or Quantum networking experience Location: This role will work onsite at our office located in Bothell, WA. Travel: up to 20% (domestic and international) Job ID: 1152 The approximate base salary range for this position is $147,336 - $192,901. The total compensation package includes base, bonus, and equity. Compensation will vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. Posted base salary figures are subject to change as new market data becomes available. Beyond base salary, total compensation includes a variable bonus and equity component and a range of benefit options found on our career site at ionq.co/jobs. Details of participation in these benefit plans will be provided when a candidate receives an offer of employment. Our US benefits include comprehensive medical, dental, and vision plans, matching 401K, unlimited PTO and paid holidays, parental/adoption leave, legal insurance, a home internet stipend, and pet insurance! IonQ's HQ is located in College Park, Maryland, just outside of Washington DC. We are actively building out our recently opened manufacturing and production facility in Bothell, WA (near Seattle). Depending on the position, you may be required to be near one of our offices in College Park, Seattle, Toronto, Canada, and Basel, Switzerland. However, IonQ will expand into additional domestic and international geographies, so don't let this stop you from applying! At IonQ, we believe in fair treatment, access, opportunity, and advancement for all while striving to identify and eliminate barriers. We empower employees to thrive by fostering a culture of autonomy, productivity, and respect. We are dedicated to creating an environment where individuals can feel welcomed, respected, supported, and valued. We are committed to equity and justice. We welcome different voices and viewpoints and do not discriminate on the basis of race, religion, ancestry, physical and/or mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, transgender status, age, sexual orientation, military or veteran status, or any other basis protected by law. We are proud to be an Equal Employment Opportunity employer. US Technical Jobs. The position you are applying for will require access to technology that is subject to U.S. export control and government contract restrictions. Employment with IonQ is contingent on either verifying “U.S. Person” (e.g., U.S. citizen, U.S. national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum) status for export controls and government contracts work, obtaining any necessary license, and/or confirming the availability of a license exception under U.S. export controls. Please note that in the absence of confirming you are a U.S. Person for export control and government contracts work purposes, IonQ may choose not to apply for a license or decline to use a license exception (if available) for you to access export-controlled technology that may require authorization, and similarly, you may not qualify for government contracts work that requires U.S. Persons, and IonQ may decline to proceed with your application on those bases alone. Accordingly, we will have some additional questions regarding your immigration status that will be used for export control and compliance purposes, and the answers will be reviewed by compliance personnel to ensure compliance with federal law. US Non-Technical Jobs. Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Accordingly, we will have some additional questions regarding your immigration status that will be used for export control and compliance purposes, and the answers will be reviewed by compliance personnel to ensure compliance with federal law. If you are interested in being a part of our team and mission, we encourage you to apply!

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. As an Optical System Liaison Engineer on the Optical Inter-Satellite Link (OISL) team, you will support the development and production of high-performance optical systems. This role provides a critical bridge between hardware design, integration, and manufacturing operations-ensuring alignment between engineering intent and real-world implementation. Key job responsibilities * Applies knowledge of OISL optical design principles to assess and resolve product/process issues through the product lifecycle. * Analyzes, conducts root cause analysis, and develops dispositions for optical system non-conformances. * Applies engineering principles to investigate technical and quality issues that cannot be resolved by operations and develops both interim and permanent solutions. * Identifies, documents, and analyzes reported problems and deviations that may impact optical performance or alignment; recommends and manages resolution. * Reviews and dispositions non-conformance events during all operational phases: procurement, storage, handling, manufacturing, assembly, testing, transportation, final integration, and launch. * Develops standard rework procedures, DFM improvements, and optical alignment aids (fixtures, tooling, methods). * Collaborates with quality, manufacturing, optical hardware vendors.and optical system experts to drive root cause analyses and maintain system integrity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the life Each day begins by reviewing test data, addressing non-conformances, and aligning with quality, integration, and design teams. You'll investigate root causes-whether optical, electrical, or mechanical-then propose and implement solutions to keep hardware on track. Hands-on work may include troubleshooting hardware, authoring rework instructions, or validating process improvements on the floor. You balance speed and rigor, ensuring fixes are well-documented and maintain design intent. Your efforts directly support the delivery of reliable, space-ready optical inter-satellite link systems. About the team The OISL team develops and delivers space-based optical inter-satellite link systems, enabling high-speed laser communication across the Kuiper constellation. The team focuses on precision hardware, alignment, and system reliability to meet the demanding requirements of spaceborne optical networks. - Bachelor's degree in mechanical engineering, electrical engineering, material science, physics or equivalent - Experience in hardware design and validation of components, subsystems and systems - Knowledge of engineering practices and patterns for the full software/hardware/networks development life cycle, including coding standards, code reviews, source control management, build processes, testing, certification, and livesite operations - Experience with hardware/software integration and real-time systems Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $86,900/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Alitheon has invented the patented concept of the FeaturePrint™. Think of a FeaturePrint as a fingerprint for any solid object. As every person has a unique fingerprint, every object has small, unique properties that make it distinct from all other similar items. Featureprinting establishes a verifiable, fingerprint-like identity for every Featureprinted object. Consider the possibilities. We've demonstrated that FeaturePrints work in the lab and in the real world. Now we need to deploy them to our customers via an enterprise-grade platform. We are a small team on a big mission and need to quickly scale to take advantage of the demand coming from Fortune 500 companies. Do you want to help design our platform? Would you like to work on a creative machine vision platform? Are you passionate about working with a small but growing start-up? If so, we would love to talk to you. Job Description Imaging and Optical Engineer You will be responsible for developing imaging solutions and collecting image data for Alitheon's Featureprint technology. This work will range from performing initial feasibility experiments for potential customers to developing and deploying systems at customer sites. You will have an ownership stake in managing our imaging lab in order to be able to deliver these solutions. This position will work closely with our Research, Engineering, and Sales/Marketing groups to come up with creative ways to image our customer's parts. Qualifications Here is what we are looking for: Ideally, you'll have a Bachelor's in Physics, Optics, E.E., or related degree. 2+ years industry, but we will consider alternate experience. You'll be devising imaging systems and need to be familiar with optical and imaging principles such as depth of field, camera gain, exposure value, calibration techniques, illumination techniques, light polarization, etc. You'll be working with software packages and libraries such as imageJ, GIMP, open CV and should have familiarity with a scripting language such as Python, Ruby, Matlab, Octave, etc. You'll need to be comfortable working with other members of the team who might be Software or Hardware engineering, researchers or technical sales engineers to define what's needed and then work independently to accomplish the task. You will need to be comfortable working with component vendors to identify and source equipment that meets project requirements. You'll need to be good at analyzing and documenting the results of your work and may occasionally be called on to communicate these results to customers or your teammates in technical presentations. Above all, we value team members who like to be challenged to learn new technologies, keep themselves up to date with the latest advances in imaging and work in a very collaborative team environment. Additional Information Work Environment We are in downtown Bellevue near the Bellevue transit center. We have a professional, fun environment where we work hard but also respect a work-life balance for team members. We offer equity, paid time off, medical, dental, vision, 401K and other benefits. Travel Requirements There is the potential to occasionally travel inside the US when we deploy at client sites, however this position is not expected to travel often. Company Address 10900 NE 8th St, Bellevue, WA 98004 All your information will be kept confidential according to EEO guidelines.

OptoFidelity is seeking 1 motivated and hands-on Optical Engineer to support our major clients cutting-edge AR development efforts in Redmond, WA. This is a 1-year contract roles with potential extensions, contributing to a specialized project in AR testing and imaging. The anticipated start date is January 5th, 2026. Each role will collaborate closely with world-class engineers on groundbreaking technologies in a fast-paced, cross-functional environment. These positions are ideal for early-career professionalsparticularly recent Ph.D. graduates or those with 24 years of relevant experience and a Bachelors or Masters degree in a related field. Types of daily work (Based on skillset) Imaging & Image Processing (Python Focus) Develop and refine imaging algorithms and analysis pipelines using Python. Perform image quality evaluation, image processing, and color analysis of optical components and AR systems. Support the development and automation of imaging-based optical metrology systems. Collaborate with cross-functional teams. Metrology & Lab Testing Perform optical and electrical testing and characterization of display and optical components. Set up and operate complex optical systems while ensuring measurement repeatability and accuracy. Conduct data analytics, document results, and communicate findings clearly to technical teams. Support failure analysis, system validation, and prototype testing. Key Responsibilities (General for either skillset) Perform and document precise optical measurements and experiments. Collaborate cross-functionally with optics, metrology, and software engineering teams. Analyze data, summarize results, and support continuous process improvement. Must-Have Qualifications BS, MS, or Ph.D. in Optical Engineering, Optics, Physics, Materials Science, or a closely related field. At least 1+ year of hands-on optics or optical characterization experience (2+ years preferred for BS holders). Comfortable working in a lab environment with hardware, optical benches, and test setups. Strong data analysis and documentation skills. Experience with Python, MATLAB, or similar technical tools. Understanding of color science and imaging principles. Nice-to-Have Qualifications Experience in electrical testing or electronics. Familiarity with optical metrology instruments (e.g., interferometers, colorimeters, imaging systems). Background in optical design, simulation, or image quality evaluation. Exposure to AR/VR system testing, hardware bring-up, or prototype validation. Knowledge of image processing or classical computer vision techniques. Salary, Perks & Benefits Competitive compensation Retirement plans: 401(k) with company match or Roth options Insurance: Medical, dental, vision, and optional life coverage Extras: Relocation support for qualified candidates, team events, and professional development opportunities Why Join OptoFidelity At OptoFidelity, you'll contribute to impactful projects with our client, at the intersection of optics, automation, and consumer electronics, working with some of the worlds leading tech innovators. We value innovation, teamwork, and continuous learning in a supportive and inclusive workplace.

Amazon Leo is an initiative to increase global broadband access through a constellation of more than 3,000 satellites in low Earth orbit. Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Export Control : This position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed. Key job responsibilities As an ECAD Tools Application Engineer, you will be responsible for providing a stable, reliable set of Electrical Computer Aided Design (ECAD) tools and database management for electrical engineering design, layout, and simulation engineers. You will anticipate tool needs, support users, and develop processes to enable to successful and rapid development of a leading-edge low earth orbit satellite constellation. A day in the life Our tools administrators help solve the problems of the day, work to lay the foundation for the future and stay on top of the most current technologies and methods to aid in our tools running at peak performance. Activities will include working with an end user to get their project back on track, creating a proposal and documents for future infrastructure needs to support scalability for the team and tools, automating processes to streamline development, and researching new tools or technologies to increase design rigor and productivity. About the team The ECAD team supports the tools and infrastructure for Electrical Engineering, PCB Design, Library Management and the interface to our Enterprise systems including PLM, ERP and our Manufacturing tools. BASIC QUALIFICATIONS - Bachelor's degree in Computer Science, Electrical,Computer Engineering or related discipline or equivalent experience. - 5+ years as an Application Engineer for one or more CAD tools such as (Mentor Xpedition, Cadence Allegro, Altium Designer). - 5+ years with frontend (design tools), and the backend (ECAD library/design database, server infrastructure) - 5+ years Enterprise Tool administration experience, debugging and solving client and server-side application issues, software installation, configuration, etc. - 3+ years of developing and documenting engineering processes related to ECAD tools and engineering activities. PREFERRED QUALIFICATIONS - Experience in Electrical Engineering design. - Experience as Application Engineer for Mentor Xpedition and Mentor EDM. - Experience automating ECAD workflows/processes. - Experience providing support for Hyperlynx, Ansys, Reliance, and other engineering applications. - Experience with Windows servers, Batch scripts, powershell, Windows file servers, HyperV - Experience with Linux servers. Bash scripts, cron, ssh, samba, etc. - Experience with PLM systems, engineering lifecycle management and workflows. - Understanding of network fundamentals; switching, routing, etc. - Experience with flexlm license servers - Experience with LDAP and SAML for user management and authentication. - Experience architecting AWS infrastructure and managing server and workstation implementation. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $116,300/year in our lowest geographic market up to $201,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

At Meta Reality Labs, we are developing the future of Wearables and Mixed Reality products. This team focuses on developing display and optics technologies for Meta products, creating see-through display systems that seamlessly blend the real and virtual realms. The role involves designing architecture and display sub-systems for wearable devices, developing and implementing test, characterization, metrology, and data solutions to support transparent display systems.We're seeking an experienced Engineer focused on Optical Engineering to join our Reality Labs team, where you'll play a pivotal role in shaping the future of these systems. As a key member of our team, you'll explore innovative architectures and design spaces for wearable systems, develop and analyze system components, and drive detailed system-level analysis. In this role, you will be part of a team where you will consistently switch between high-level thinking and meticulous attention to detail to mature our architectures and designs. **Required Skills:** Optical Engineer - Mixed Reality Responsibilities: 1. Explore architectures and design spaces for optical systems through design and prototyping using novel and conventional techniques and components 2. Develop and analyze system and subsystem components that are specified to meet the needs of advanced AR products 3. Perform detailed system level analysis (i.e. optical modeling, tolerancing, and estimating size, weight, power to predict system performance etc.) 4. Contribute to the process of design releases, prototyping and creation of related documentation 5. Collaborate with internal teams for adoption of mature technologies **Minimum Qualifications:** Minimum Qualifications: 6. Bachelors or Masters degree in the field of Optics, Optical Sciences, Optical Engineering, Physics, Electrical Engineering, Computer Sciences or a similar field, and/or equivalent work experience 7. 2+ years of experience in applied research and/or product development 8. 2+ years of experience with optical systems or similar 9. Experience maturing optical systems from proof-of-concept to early low volume prototype or production 10. Experience in scripting and/or system optimization and analysis tools 11. Knowledge of optical design, modeling methods, and tools for imaging and illumination systems as well as tolerance analysis 12. Experience working, communicating, and collaborating in a cross-functional environment **Preferred Qualifications:** Preferred Qualifications: 13. Experience designing and simulating optical systems (including illumination systems, camera modules, viewing optics with films/coatings) for eye tracking and face tracking applications through sequential and non-sequential ray tracing using Zemax and LightTools to optimize system performance, including image quality, distortion, and signal-to-noise ratio 14. Analyzing data from builds to validate design and simulation accuracy, lead iterative design cycles based on data analysis 15. Experience with illumination simulation, camera modeling, and stray light analysis 16. Experience with eye tracking technology or related fields (e.g., ophthalmology, computer vision) 17. Knowledge of programming languages such as Python, MATLAB, or C++ 18. Proven experience in analytical and problem-solving skills **Public Compensation:** $111,000/year to $164,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.