Manufacturing engineer jobs in Washington

Amazon Leo is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Product Design (PD) strives to constantly raise the bar on the customer experience. Product Design Engineers engage with an experienced cross-disciplinary team to conceive, design and bring to market innovative consumer products for the Amazon Leo program. Key responsibilities include mechanical part and assembly design, testing, evaluating, and down selection. These positions identify key design attributes, and work quickly and efficiently to converge on an electromechanical design for the system. They highlight concerning issues to leadership and provide recommendations on how to revolve them. The output of their work is the physical product. They know intimately the rationale and tradeoffs behind each and every detail of the design from material selection, a reinforcing rib, a molding gate, etc. They work with manufacturing partners early to scale their designs for high volume manufacturing while optimizing for cost, performance and challenging schedules. They have the ability to communicate effectively and efficiently with PD team members, cross functional teams, and executives. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Lead Architect / PD Technical Lead for an outdoor consumer electronics product. • Work with cross functional team in assessing project/risk readiness for PD owned deliverables. • Concise and accurate communication with PD members, cross functional teams, and executives. • Independently able to change priorities based on high value judgements. • Customer focused when solving ambiguous problems. • Negotiate and collaborate with external teams to manage priorities and allocate PD resources effectively. • Ability to create scalable solutions while solving tactical problems. • Up to a total of 25% international and domestic travel may be required. BASIC QUALIFICATIONS- Bachelor's degree in mechanical engineering or equivalent - 7+ years of experience in consumer electronics products with the last several years as architect or technical lead designing IP66 outdoor rated electronics/telecommunications products. - 5+ years of experience with 3D CAD modeling, tooling reviews and drawing release for production tooling. - 5+ years of experience with designing for high volume manufacturing and assembly processes (should include multiple tools in several of: plastic injection / thermoforming, casting, sheet metal, machining, various finishing processes) - 5+ years of experience designing Printed Circuit Boards (PCBs), flexes and electrical interconnects PREFERRED QUALIFICATIONS- MS or PhD in Mechanical Engineering or other closely related engineering field of study. - 15 + years of experience in consumer electronics products with the last 5 years as architect or technical lead designing IP66 outdoor rated electronics/telecommunications products. - Subject Matter Expert in several mechanical engineering disciplines. - 5+ years of experience with Phase Array antennas including products used in the field. - Excellent written and verbal communication skills at both the engineering and executive level. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Amazon Logistics (AMZL) is searching for a Sr PE Innovation Engineer to take the AMZL Process Engineering Innovation team to the next level. Our logistics teams are changing the way we interact with customers around the globe every single day and solving some of the biggest logistical challenges facing not just Amazon, but the entire industry. We are looking for an experienced, customer-obsessed Engineer to join the Amazon Logistics WW Process Engineering Team. This Engineer will be responsible for driving change, large-scale business communications, mitigating risks to plan, goal tracking, data delivery and governance, process improvement, and other ad-hoc projects that drive efficiency and reduce risk across the PE Innovation portfolio for Process Engineering. The right candidate can influence without authority and present to senior leadership. They will be a strong advocate for the team and will work hand-in-hand with key stakeholders in developing and growing strategic relationships, both internally and externally, as well as creating and streamlining internal processes. The Engineer will strive for service excellence, and drive centralization and adoption of our mechanisms with all global stakeholders. This highly visible, cross-functional role will require effective collaboration and efficient communication with multiple teams (Product, Tech, Program, Finance, Legal, SMEs, Local Ops, GP, etc.) and global stakeholders. The right candidate is proactive in understanding and communicating critical business needs, and knows how those translate into solutions. This person must have experience building long-term, strategic relationships, and becoming influential partners. This position requires heavy verbal and written communication on status, risks and our sourcing pipeline. This role is a great fit for a professional team-player who is flexible, and very comfortable with ambiguity. The successful applicant will merge a strong technical depth with bar raising communication skills. The Engineer will possess a strong business and project management background, and is able to thrive and succeed in an entrepreneurial environment, and not be hindered by opposing priorities. They will not only successfully develop and drive programs across teams, but is willing to roll up their sleeves, dive into the weeds to get the job done, focusing on the data and details to ensure the right inputs are top of mind for our customers and stakeholders. To be successful in this role you will need to be able to influence and work with senior leaders across multiple organizations and geographies. You will work with organizations such as Worldwide (WW) Engineering and Design, WW Tech SME, Last Mile Delivery and Tech as well as Operations to innovate at scale and drive the development roadmap. Key job responsibilities • Handle a high volume of requests, engagements and interactions in fast paced environment • Track existing and set up new metrics as required to validate vendor and team performance • Develop and implement performance improvement plans, working cross-functionally with internal and external stakeholders • Report on performance in weekly and monthly forums with partner teams and senior leadership • Set measurable targets that align with the overall goals of the organization • Comprehend the technical requirements of our internal customers and become an expert in field • Influencer: Innovative pioneer with the ability to identify opportunities and influence organizations to gain support and overcome resistance with data and persuasion. • Significant experience overseeing partner teams through good judgment, making and data. • Doer: Ability to successfully deliver end-to-end technology and vendor operations projects, working through the many obstacles along the way • Communicator: Ability to present to senior leadership, communicate expectations and requirements equally well with business and technology teams, and capacity to write well-reasoned and data-oriented proposals, performing your own data examination as necessary • Problem Solver: Ability to utilize exceptional problem-solving skills to work through difficult tasks BASIC QUALIFICATIONS- 5+ years of design & innovation, research & development work experience - Bachelor's degree in Engineering or a foreign equivalent - Experience with design & innovation and research & development - Experience in management of engineering design projects - Experience using business or technical software like MS Excel, MS Project, and CAD software PREFERRED QUALIFICATIONS- 5+ years of specialty (with progressive responsibility) experience - Master's degree in Engineering (any domain), Operations, Business Administration, or a related field - Knowledge of concepts like system architecture, optimization, system dynamics, system analysis, statistical analysis, reliability analysis, electronic system design, and decision making - Experience with complex automated material handling equipment, packaging technologies, and systems and high-speed manufacturing - Experience with design-in-safety Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $118,900/year in our lowest geographic market up to $205,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. THE ROLE Have you wanted an opportunity to manufacture electric propulsion systems for an advanced satellite constellation? The Propulsion Manufacturing Engineer will develop, implement and refine processes used to fabricate and qualify electric propulsion systems. You will mentor colleagues within the team. Key job responsibilities - Support architecture determination and designing the propulsion system configuration - Provide input into designs to enhance manufacturability and reduce costs - Develop and own inspection, manufacturing, qualification and acceptance tests including hardware and workflow design - Design and carry out process development tests - Process and interpret assembly and test results to generate design guidance. - Coordinate with other Amazon Leo team members to establish a path towards volume production. BASIC QUALIFICATIONS- Experience in developing functional specifications, design verification plans and functional test procedures - 6+ years supporting production in a manufacturing capacity or related field PREFERRED QUALIFICATIONS- Master's degree in electrical engineering, computer engineering, or equivalent - Experience working with interdisciplinary teams to execute product design from concept to production - Experience with the project management of technical projects Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Test & Evaluation (BT&E) team is seeking an Associate Manufacturing Engineer to join our team in Tukwila, WA. The selected candidate will be responsible for fabrication planning and installation by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and support in the lab during the build/installation. The primary focus of this position is the lead, manage and support of the design & fabrication efforts located in Tukwila, WA. These efforts represent a wide variety of research and production programs primary in support of Boeing Commercial airplanes (BCA) and Boeing Defense, Space and Security (BDS) programs. Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. Position Responsibilities Include: Assist in the development and implementation of production and tooling methodologies Participate as a member of an Integrated Product Team (IPT) in the integration of technical solutions Work with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build Assist in implementing manufacturing plans Resolve technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts Assist in the implementation of Lean principles and technologies Interface with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 3+ years of experience working in a production and/or manufacturing environment 1+ years of experience managing projects 1+ years of experience working in a design engineering, industrial engineering or manufacturing role Ability to read, understand and interpret engineering drawings General Drawing Interpretation & GD&T knowledge Preferred Qualifications (Desired Skills/Experience): 3+ years of experience working in a lab test, flight test, or similar test environment Experience in support of commercial and military customers. Experience in Project management Boeing BCA/BDS/BT&E Manufacturing Engineering experience in Systems Lab Test. Experience in ME and processes across multiple engineering disciplines Experience with PDM, CAPP, CMES, MESci, EPARTs, GOLDesp Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Union: This is a union-represented position. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $89,250 - $120,750 Applications for this position will be accepted until Dec. 08, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Ready to apply Before you do, make sure to read all the details pertaining to this job in the description below. Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. xevrcyc Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Who We Are Coughlin Porter Lundeen is a civil and structural engineering firm. Focused in the Pacific Northwest, we partner with clients across markets to bring unique project visions to life. We were founded with the goal of exceeding the standards and services provided by engineering firms. And today, more than 30 years later, that vision continues to guide all that we do. Our core values are the heart of who we are and guide how we work each day. Commitment to Quality, every drawing, every detail. Creativity, from project solutions to the way we define our roles. A “Client-First” Mindset, cultivating long-term partnerships. An Empowered Team, continued learning and development. Collaboration and Respect, with our clients and within our own professional work environment. Community, supporting the causes most important to our staff and city. Description Coughlin Porter Lundeen is seeking a structural project engineer; this position involves the design and preparation of construction documents on diverse project types including a variety of building materials. As an integral member of the design process, structural engineers are challenged to develop project management skills, lead in-house design teams, and work firsthand with a diverse range of clients. Engineers are involved with every aspect of the project from design through construction. This position requires sound technical skills, strong communication skills, and a professional attitude. Minimum Qualifications BSCE or MSCE degree (MSCE Preferred) 4+ years structural design experience P.E. license preferred Physical Requirements Ability to drive as needed to client project locations (primarily in the greater Seattle area). Able to travel by airplane domestically as needed for client projects (outside the greater Seattle area), campus recruiting, conferences, etc. Requires sitting for extended periods of time at a computer, keying and reading content. Will be required to stand, reach, bend, twist, squat, and move about freely in an office environment. May need to be able to lift up to 25 lbs. Able to use office equipment such as phone, copier, printer, etc. Benefits and Compensation $92,000-$115,00 per year (depending on experience and qualifications) Additional compensation for hours worked in excess of 40 hours weekly (paid quarterly) Medical (HSA with employer contributions), dental and vision Company paid life and AD&D insurance Company funded ORCA card PTO (15 days starting) 8 paid national holidays (including 1 floating holiday) 401(k) matching Annual bonuses and profit sharing (at company discretion) Monthly health and wellness stipend Employee assistance program Additional information regarding our workplace and benefits can be found here.

KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients. Key Responsibilities: Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations. Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors. Conduct site investigations, condition assessments, and provide design and construction support. Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems. Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Preparation and review of reports. Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met. Edit and prepare design specifications. Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned. About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset. Minimum of 7-15 years of experience in mechanical engineering. Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire. Previous consulting experience is preferred, but not required. Excellent verbal and written communication skills are required. Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously. Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information. Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred. The salary range for this position is $110,000-$160,000 Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. *Please help us learn more about you, your professional goals, and why this job is a good fit for you by submitting a cover letter along with your resume. We highly encourage all applicants to provide a cover letter.*

The Killeen Group is seeking several Project Engineer Leads on behalf of a leading manufacturer in Skagit County, WA. This growing company provides award-winning service to the commercial aerospace, space and defense markets. The Project Engineer Lead is a key force behind the success of the engineering team - responsible for ensuring the team can successfully complete assigned projects and requires a passion for leadership and mentorship. This role will serve as a technical expert, be the primary point of contact to resolve customer issues, pursue proactive resolutions to issues at every stage of the project, implement risk mitigation strategies, and encourage and support less experienced engineers in their professional development. Title: Project Engineer Lead Location(s): Onsite - Hamilton, WA Type: Salaried, Full-time Salary: $95,000-145,000/yr + Bonus Travel: On-site with potential opportunities for off-site Duties: Interact frequently with shop floor to ensure project health; may have daily presence on shop floor. Manage engineering projects to produce technical deliverables with fixed cost and schedule constraints. Manage project scope and is responsible for the execution of the team's work. Manage a team of engineers to execute project scopes. Perform risk assessments, frequently encourages less experienced engineers to identify improvement areas. Direct and participate in engineering activities, including design, engineering reviews, and work order preparation. Assure all team members have a complete understanding of all quality requirements for projects. Responsible for assuring the team has materials organized and ready for manufacturing, including monitoring purchasing activities. Monitors and reports project financial performance. Shall, at all times, demonstrate cooperative behavior with colleagues and supervisors. Identify process improvement areas. Communicate directly with customers to establish detailed requirements and deliverables, provide project status, and discuss risks. Qualifications: Required: This position requires the ability to obtain a U.S. Secret Security Clearance (U.S. Citizenship Required). The Company will assist in gaining this access once employed. Special Access Program or other Government Access Requirements are mandatory for this position and requires candidate agreed to enter a Continuous Evaluation program. 5+ years engineering experience in a manufacturing environment. Proven experience working directly with senior leadership, managing strategic initiatives, and influencing decision-making Expertise in leading complex engineering or business projects, coordinating cross-functional teams, and ensuring timely execution and stakeholder alignment Strong analytical and problem-solving skills, with a proactive, inquisitive, and intuitive approach to challenges Advanced project management abilities, with demonstrated success in executing initiatives and meeting strategic objectives Strong leadership and interpersonal skills, with the ability to collaborate effectively and influence stakeholders at all levels Proven ability to manage confidential data and executive-level discussions with professionalism and discretion Ability to thrive in a fast-paced, dynamic environment, balancing multiple priorities with efficient and effective time management High level of integrity, professionalism, and discretion in handling confidential information Exceptional verbal and written communication skills in English, with experience presenting to executives, managing customer relations, and negotiating contracts Benefits: Medical, dental, and vision insurance with employer contribution Disability insurance as well as Life/AD&D insurance HSA (Health Savings Account) with employer contribution and FSA (Flexible Savings Account) 401k with employer matching Paid time off and paid holidays (including two floating holidays) Education reimbursement program Education reimbursement program available after 1-year of service Next Steps: If selected and progressed, you will: Conduct a screening call with a Killeen Group recruiter Conduct 1-3 interviews with hiring company

Engineering Design & Testing Corporation (“EDT”) is a professional services organization providing forensic engineering, technical consulting, fire investigation, risk mitigation, and associated services across the United States. Founded in 1978, EDT brings more than 45 years of experience providing objective civil / structural, mechanical, and electrical forensic engineering analysis, accident reconstruction services, and expert witness and litigation support to industrial, manufacturing, insurance, and legal professionals requiring comprehensive, unbiased, technically sound opinions and reporting with a wholistic perspective. As an Employee-Owned company, our team of highly qualified experts are vested in delivering cost-effective, responsive, and reliable professional services and deliverables to our clients. Position Summary: Serves as the Engineer-In-Charge (“EIC”) responsible for coordinating with clients, performing site visits, managing resources, writing reports, and setting deadlines to ensure project deliverables are submitted in a professional and timely manner. Conducts investigations involving MEP systems, mechanical devices, and various types of machinery and / or equipment, including but not limited to, HVAC systems, hydraulic / pneumatic devices, pressure vessels, combustion equipment and / or rotating equipment. Performs root cause analyses, hazard and damage assessments, repair vs. replace evaluations and cost estimates, lab and field testing of materials, and design and manufacture defect evaluations. Must be a licensed professional engineer with a thorough understanding of fundamental engineering principles along with a firm comprehension of the function and operation of a wide range of mechanical components and equipment. Provides expert judgement and forms objective, fact based, technically sound opinions and unbiased conclusions on case assignments from insurance adjusters, independent adjusters, attorneys, and other non-legal, non-insurance clients. Must be willing to travel and physically able to climb, stand, walk and kneel for extended periods of time. Is self-motivated and capable of working independently as well as in a group environment with a dedication to ethics, quality, and customer service. This is a Hybrid/Remote role. The successful candidate must reside in the Pacific Northwest. Primary Duties & Responsibilities: Working independently, while ensuring the timely and cost-effective execution of assigned cases; Serving as the primary point of contact with clients including development and coordination of case budgets, work orders, site visits, cost estimates, and associated deliverables. Maintaining contact with clients on active cases to provide status updates, including case spend and budget status, and addressing questions, needs, or concerns at least every other week, or as otherwise agreed upon; Assisting with the development and ongoing updates to the scopes of work associated with assigned cases, as necessary; Making independent decisions for assigned cases, including the selection of applicable analysis and testing methodologies and identification and selection of resources relevant to execution of the established scope of work; Managing resources for assigned cases, including both in-house and third-party sub-contractors where applicable, to meet established deadlines; Engaging other disciplines to address areas of assignments outside of your experience or expertise / discipline, where necessary; Conducting onsite investigations, testing, and gathering applicable field data on residential, commercial and industrial properties to assess damage and gather evidence of damage and / or loss; Preparation of repair and / or replacement cost estimates, as necessary; Participating in conference calls and / or in-person meetings with clients regarding investigation status and results; Preparation of forensic reports clearly detailing the observations made, documentation and data collected from onsite inspections, laboratory examinations, applicable research conducted, testing and performance analysis results, and the associated conclusions; Providing technical support and testifying as an expert witness in depositions and court proceedings, as necessary; Collaborating with clients, colleagues, attorneys and other industry professionals, as necessary; Maintaining weekly updates to case status reports and working with the Regional Engineering Manager and Chief Engineer to address any issues with clients or your assigned cases; Conducting research and keeping current with industry best practices and emerging technologies; Developing technical topics for publication, industry presentations, and both internal and external training and continuing education development; Supporting EDT's marketing and business development resources including occasionally participating in client-relations meetings, attending industry conferences, preparing marketing and technical presentations, assisting with the development of marketing materials, preparing industry blogs and white papers, and engaging with other industry professionals; Participating in EDT's mentorship program and supporting the training and development of new engineers in conjunction with the Chief Engineer and assigned Training Coordinator; Secure and maintain professional licensure (at Company's expense) in all states where conducting investigations, including remaining current on any continuing education requirements, as necessary. Key Skills & Qualifications: Strong interpersonal skills; Excellent oral and written communication skills with a proven ability to write comprehensive technical reports; Strong organizational and time management skills; Advanced analytical and problem-solving capabilities; A high degree of integrity, honesty and moral values adhering to the Professional Engineer Code of Ethics; Ability to work independently with minimal supervision, as well as within a team environment; A collaborative demeanor with the ability to work through conflict, differing perspectives and opinions, and communicate across differing backgrounds and education levels; Ability to travel out-of-town, with periodic overnight travel required; Have strong PC, Tablet and software skills, including: MS Office - Word, Excel, PowerPoint required; Adobe Acrobat DC , Bluebeam Revu , or comparable PDF software; B.S. or M.S. Degree in Mechanical Engineering required; 4+ years' experience in forensic engineering preferred, relevant mechanical engineering & design experience considered; P.E. License with NCEES registration required; Valid driver's license required; Engineering Design & Testing Corporation is an Equal Opportunity Employer

Pacific Pile & Marine (PPM) is a heavy civil and marine general contractor providing top-tier services along the West Coast of the United States and Canada. Headquartered in Seattle, WA, PPM specializes in diverse marine and transportation infrastructure projects, including bridges, ports, marine structures, dredging, and environmental construction. The company serves regions across Washington, Oregon, Idaho, Montana, Alaska, California, Hawaii, and British Columbia. Known for its cutting-edge industry leadership, PPM seeks motivated, team-oriented professionals to support its innovative and impactful projects. Role Description This is a full-time, on-site Project Engineer role located in Seattle, WA or Anchorage, AK. Project Engineers are responsible for performing duties in the field and directly gathering, calculating, and compiling data for the engineering and business functions of a project. It is expected the Project Engineer will provide technical engineering information to company supervision and field crews to ensure construction work complies with all engineering standards, codes, specifications, and design instruction applicable to one or more disciplines. Essential Duties and Responsibilities: Manage the measurement, review, approval, documentation, and input of project quantities. Construct the project budget from the conformed estimate, working with the superintendent and project manager to select the appropriate work activities and cost codes. Establish and maintain the project contract administration plan. Assist project manager with reviewing and preparing month‐end cost reports including the monthly Progress Statement and Job Operations Report (JOR). Assist with cost forecasting and revenue projections. Manage the project recordkeeping and correspondence functions. Maintain tracking logs for change orders, RFI's, submittals, and letters. Maintain the project daily report. Manage the preparation, review, approval, and forwarding of the project submittals. Prepare and submit progress invoices to the owner with Project Engineer / Project Manager review. Work with superintendents, project engineers, and project managers to develop a project plan to create a project CPM Schedule. Manage and maintain the project schedule. Manage the subcontract and procurement process including directing or performing the solicitation, review, and document preparation elements. Participate in the project safety process, conduct safety inspections, and contribute to weekly toolbox meetings, mass safety meetings, and safety training. Coordinate and assist in the documentation, preparation, and resolution of change orders and extra work efforts. Generate engineering feasibility studies to support planning and scheduling efforts. Assist with managing the collection, review, approval, and processing of the daily labor timesheets. Setup, control, and manage all engineering and project records/files. Provide engineering support to field and office operations. Take the lead in working with designers and/or engineers to do value engineering, material substitutions, and engineering-related constructability issues. Manage the project turnover process as it relates to punch list, quality control, commissioning, final documentation submission, and check‐out of installed systems. Qualifications Bachelor's degree in Engineering or Construction Management or equivalent combination of technical training and related experience. Demonstrated ability to implement, utilize, and manage the cost management process including quantities, cost reports, forecasting, labor reports, and documentation & recordkeeping. Ability to efficiently perform the contract administration functions including correspondence, document control, daily reports, and change orders/claims preparation. Ability to efficiently perform the project administration processes including accounts payable, accounts receivable, and subcontractor/supplier correspondence & tracking. Demonstrated proficiency to develop, analyze, and maintain complex project schedules. Demonstrated understanding of company safety philosophy and a working knowledge of the Safety and Crisis manuals. Effective communication skills, both oral and written, including the ability to compose and edit professional letters to external organizations including customer, vendor, government agencies, and subcontractors. Ability to organize and supervise individual engineering functions. A rudimentary knowledge of survey. Strong computer skills including the ability to use Microsoft products such as Word, Excel, Project, and Outlook. Ability to give oral presentations using PowerPoint. Compensation and Benefits Washington Salary Range of $79,800 to $105,000 depending on experience. Retirement Plan including up to a 4% employer match. Three weeks paid vacation per year. 14 Paid Holidays per year. Sick leave provided per WA Paid Sick Leave Law. Employees (and their families) are covered by Medical, Dental & Vision Benefits. Annual Bonus program Valid driver's license and acceptable driving record required to operate company vehicles. A pre-employment drug screen and background check will be conducted. To apply, please email your resume and salary requirements to ***********************. Pacific Pile & Marine is an Equal Employment Opportunity Employer. All qualified applicants will be considered, regardless of race, gender, or status as an individual with a disability or veteran.

Engineering Line Lead Jubilant HollisterStier LLC, a well-established member of the business community in Spokane, Washington, provides a complete range of services to support the pharmaceutical and biopharmaceutical industries. The Allergy business is a worldwide leader in the manufacture of allergenic extracts, targeted primarily at treating allergies and asthma. Jubilant HollisterStier is also a nationally recognized contract manufacturer of sterile injectable vials, and lyophilized products. Jubilant HollisterStier is a proud member of the Jubilant Pharma family. Our Promise: Caring, Sharing, Growing We will, with the utmost care for the environment and society, continue to enhance value for our customers and stakeholders by providing innovative products and economically efficient solutions' through growth, cost effectiveness and wise investment of resources. Job Description: The CMO Engineering Line Lead position provides leadership, manufacturing support and coordination of the engineering department for the CMO line specific projects. This position ensures that contract projects, equipment functionality, compliance support, and capital expenditures are executed per Jubilant HollisterStier management initiatives, compliance guidelines, the JHS project management system, and the capital budget schedule. It is the responsibility of this position to ensure line specific compliance of the CMO equipment and team with state, local, and federal regulations. This position ensures operations and projects are carried out under adherence to GEPs and cGMPs. Responsibilities: Provide technical oversight and leadership to the engineering team roles responsible for their area of responsibilty within the CMO Business Unit. Drive technical improvements and internal/external responses to equipment and facility observations. Management of the assigned capital project schedules and budgets. Assign and oversee engineering projects including internal capital, compliance, and contract manufacturing. Coordinate and supervise engineering resources to ensure adequate and appropriate staffing for current and upcoming projects. Ensure designated area, equipment,and engineering infrastructures are compliant to local, state, federal, and international regulatory agencies. Execute high level projects from conception, consistent with upper management objectives for business growth. Manage and execute facility and equipment updates to meet company growth and economic objectives. Support client audits and technical visits. Effectively communicate project status, constraints and current or potential issues to upper management. Qualifications: BS in: Mechanical, Chemical, Electrical, Manufacturing, or similar engineering discipline 3+ years of related experience Pharmaceutical experience FDA regulated Industry experience Facility engineering experience Office (Word, PowerPoint, Excel, AutoCAD & SAP) Ability to work independently without routine instructions. Preferred Qualifications: Supervisory experience Shift: Day Compensation: The salary range for this position is $103,050 - $151,100 depending on experience. Midpoint and above is reserved for employees who have longevity with Jubilant HollisterStier and consistently exhibits outstanding performance over a period of time in the role Benefits: Medical, Dental, Vision, Flexible Spending and Health Savings Accounts Life, AD&D, Short and Long Term Disability 401(k) with company match Generous paid time off plan Employee Assistance Program Optional Benefits: Voluntary Life and AD&D for employee & family Supplemental Medical coverage (Critical Illness, Hospital Indemnity and Accident coverages) Pet Insurance ID Theft Protection Perk Spot Discount Program Jubilant HollisterStier is a great place to grow! If you're up for a rewarding challenge, we invite you to take the first step and apply today! *************************************************** *Please click on the Spokane, WA link* Jubilant HollisterStier is an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to their protected veteran status and will not be discriminated against on the basis of disability. If you require assistance applying for a position, please contact our HR Department at: ******************************

Title: Continuous Improvement Specialist Duration: 12 months (potential multi-year contract) Key responsibilities: Work cross-functionally with teams to affect department-wide performance improvement with our internal and external partners by designing and implementing processes, metrics, and programs that enhance the end-to-end customer experience Participate in listening mechanisms, to include cross-functional meetings and improvement projects related to timeliness and quality of service delivery Coordinate monthly Continuous Improvement team communication strategy, sharing successes and engaging Operators to learn about continuous improvement methodologies Analyze operations to identify key metrics and opportunities for effective business operations Lead high impact projects that require quick action to resolve employee pain points Participate in regular operational reviews and performance reporting. Includes coordinating with the necessary stakeholders, ensuring information is relevant, accurate, easy to consume, and conveys improvement opportunities Facilitate meetings while also providing feedback and insight (i.e., Voice of the Operator intake review, roadmap prioritization, etc.) Define and drive project plans in an ambiguous, fast-paced environment Work with program managers, operations leaders, and the leadership team to communicate the impact of critical business initiatives in a global setting Influence design and development of strategic processes Audit completed projects to verify sustained impact Required Qualifications: Bachelor's degree 3+ years' experience in operations leadership, business consulting, program management, or project management experience 2+ years' experience in delivering results related to quality and/or efficiency improvements Detail oriented, excellent analytical, verbal, and written communication skills, especially narrative writing High levels of integrity and discretion in handling confidential information Preferred Qualifications: Advanced degree Six Sigma Green Belt or Lean Certification Analytical experience using Control Charts, Hypothesis Testing, Regression Analysis, and other statistical tools Experience identifying, analyzing, and solving ambiguous problems with an extreme attention to detail Passion for technology, curiosity to dive deep into the suite of technical products and commitment to learning and expanding technical knowledge Able to prioritize in complex, fast-paced environment Experience in or demonstrated ability to lead people/teams without formal responsibility and interacting and building rapport with teams of all levels Strong change management and influencing skills; ability to negotiate and communicate across all levels of the organization Demonstrated experience and proficiency in effective written and verbal communication

Job Title: Research Engineer Duration: 12 Months W2 Contract We are seeking a Research Engineer for our team that researches new wearable AI devices and interaction models. This role combines development of interactive AI experiences and research of human behavior. Top 3 Must-Have Skills 1+ year experience developing user interfaces / interactive experiences 2+ year experience developing with C++/C# in a game engine (Unity, Unreal), Unity is preferred. 2-3+ years in Python for data analysis (numpy, scipy) Nice-to-Have Skills Familiarity with user research, behavioral experiments Familiarity with sensing technologies (IMU, EMG, cameras, microphones) Advanced degree (MS, PhD) in a related field Experience developing for AR/VR/wearables Experience using ML libraries and/or LLMs Experience w/ C++ Responsibilities Implement user interfaces for internal demos and formal user studies Work with prototype hardware and constellations of computing devices Collaborate with researchers to build data processing pipelines

Amphenol CMT is a leading innovator in the design and manufacturing of advanced medical devices that transform and elevate patient care. We specialize in engineering high-performance interconnects, flex circuits, molded components, precision bearings, and fully integrated solutions for surgical, interventional, monitoring, and other mission-critical applications. Guided by a culture of innovation, collaboration, and lean principles, we deliver exceptional solutions and premium service that set new standards in the industry. As part of the global Amphenol family-one of the world's largest providers of high-technology interconnect, sensor, and antenna solutions-CMT is proud to contribute to products that enable the electronics revolution and improve lives worldwide. MicroConnex, a CMT business unit, is a recognized leader in developing and fabricating specialized flex circuit technologies for high-density, demanding applications-further expanding our expertise and impact across critical industries. SUMMARY The Applications Engineer plays the role of a technical expert in customer-facing activities such as assessing their needs, informing them of our capabilities, and reviewing customer-supplied design data for accuracy and manufacturability. They blend their industry expertise with knowledge of markets, helping the team prepare to best serve its customers. Additionally, a person in this role acts as a liaison to other engineers and Sales team, to communicate the technical details of the job and to provide update on the progress of setup and manufacturing. *PAID RELOCATION AVAILABLE! ESSENTIAL JOB FUNCTIONS Creates complex technical proposals for customers by integrating knowledge of product, regulatory requirements, market, price point, organizational capabilities, and corporate strategy. Communicates with customer to establish understanding of customer's technical requirements and convey design capabilities, product performance, and organizational expertise. Identifies new business opportunities. Manages customer expectations and balances against internal capabilities for complex and challenging projects, processes, and products. When required, creates, and maintains project schedule, resources, and budget, which includes the generation of milestones required to complete assigned projects. Oversees the establishment and maintenance of a project quality culture that prioritizes compliance, risk management, and operational excellence. Directs the development and implementation of communication plans that effectively convey project status, risks, and successes to all stakeholders, including executive leadership Directs the development and implementation of cost estimate processes in preparation for sales quotations for customer cable assemblies to be manufactured by Amphenol CMT. Directs in a cross functional team a complete technical assessment for each project quoted, determining tooling requirements and cost, testing requirements and adapters required, level of manufacturing data required and determines if further clarification and/or documents are required from the customer. Is someone that can discover problems and present solution options to Customer technical contacts with onsite technical support involving industry standards, medical specifications, design assistance, Amphenol CMT production capabilities, and material requirements. Partner with process engineers to ensure process capabilities align with customer requirements and planned market positioning for growth. Collaborate with Sales team in communication with customers on the progress of a work order. Ensure expected yield levels are appropriate to meet customer requirements. Assist in post-shipment support, such as customer complaints and RMAs. Support Sales team during customer visits and trade shows to showcase product capabilities. *Other duties as required in support of the department and the company* SUPERVISOR RESPONSIBILITIES The responsibilities of this role do not include supervising other employees. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Bachelor's degree in engineering/sciences with 10+ years in related engineering role, required. Advanced technical degree or a degree in management/marketing field, preferred. 5+ years' minimum experience in a flexible printed circuits manufacturing unit. Background in medical industry, preferred. CERTIFICATES, LICENSES, REGISTRATIONS IPC certifications in standards or design, preferred. Project Management Professional (PMP) certification, preferred. Relevant certification in Lean Manufacturing, Six Sigma, or similar methodologies, preferred. SPECIFIC SKILLS and/ or KNOWLEDGE Strong customer focus and interaction - strong interpersonal relationship/customer skills. Exceptional communication skills (written and verbal) with emphasis on active listening and technical documentation. Able to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write technical protocols and reports. Ability to effectively present information and respond to questions from other employees, managers, or customers. Able to travel internationally. Broad engineering abilities and understanding of electrical, mechanical, and mfg/industrial engineering disciplines. Proficient in MS Office Suite and SharePoint. Knowledge of ERP systems, SAP preferred. Ability to view and modify Gerber or DXF data. Ability to read customer drawings and stackups. Excellent analytical, problem-solving, and attention-to-detail skills. Team player with the ability to collaborate with various departments. Strong communication skills to effectively convey standards and procedures. Reliable and flexible to work additional hours on short notice to complete orders or special projects to meet customer or internal demands. Able to work independently with minimal supervision. LANGUAGE REQUIREMENTS Excellent verbal and written communication skills in English. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; reach with hands and arms; talk and/or hear. The employee frequently is required to sit. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Amphenol CMT is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection in specific locations. Ability to compile with JSA in specific areas. EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL 20% to 50% - to customer sites and Amphenol CMT manufacturing sites as needed. SALARY INFORMATION: According to several states' laws, this position's salary range falls between $130k and $160k annually. However, this salary information is merely a general guideline. When extending an offer, Amphenol CMT considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations.

About HV Engineering HV Engineering (HVE) is a mechanical, electrical and plumbing (MEP) consulting engineering firm located in Washington State, with offices in Mountlake Terrace and Spokane Valley. HVE specializes in designs for multifamily, commercial, educational, and healthcare projects. Founded in 1996, we're known for practical solutions to client challenges and hands-on involvement from experienced principals on every project. Your Role We're seeking a candidate who is a licensed PE or EIT with significant HVAC and plumbing design experience who can provide solutions to nuanced challenges, enjoys mentoring junior engineers, and who demands quality while they oversee design efforts from concept through construction. What You'll Do Coordinate with architects, contractors and other disciplines, along with internal team members to ensure fully integrated designs Perform HVAC and Plumbing load calculations, equipment selection, and code compliance reviews Conduct QA/QC on plans, specs, and reports What You Bring Professional Engineer (PE) License or Engineer In Training (EIT) certification 5+ years of experience in plumbing/HVAC design Working knowledge of IMC, UPC, Energy Code and ASHRAE Standards Proficiency in Revit, AutoCAD and Microsoft Office Strong communication, organization, and mentoring skills What We Offer We are targeting a base salary of $100,000 to $150,000, yet it is determined by several factors including education, experience, licensing, and a history of working in the Seattle area. Medical insurance, premiums covered in full for full-time employees Dental insurance, premiums covered 75% by the company SIMPLE IRA with 3% employer match Minimum of fifteen (15) days PTO, and higher for more experienced employees Eight (8) paid holidays Hybrid work (typically, one day in office per week) Please apply by submitting your resume through LinkedIn and one of our team members will be in touch. We are not engaging with third-party recruiters or agencies. Please only apply if you are submitting your own candidacy.

Amphenol CMT is proud to be an industry leader in the advanced development and manufacturing of critical medical devices that transform and elevate patient care. We specialize in tailored interconnects, precision components, and fully integrated solutions for surgical, robotic, interventional, and general healthcare applications, all crafted to redefine what's possible in modern medicine. Driven by a culture of innovation, collaboration, and lean principles, we deliver exceptional solutions and premium service that set new benchmarks in the industry. Amphenol CMT is a proud part of the global Amphenol family, one of the world's largest providers of high-technology interconnect, sensor and antenna solutions across virtually every end market. Our products Enable the Electronics Revolution and help deliver the future of healthcare. SUMMARY The Applications Engineer plays the role of a technical expert in customer-facing activities such as assessing their needs, informing them of our capabilities, and reviewing customer-supplied design data for accuracy and manufacturability. They blend their industry expertise with knowledge of markets, helping the team prepare to best serve its customers. Additionally, a person in this role acts as a liaison to other engineers and Sales team, to communicate the technical details of the job and to provide update on the progress of setup and manufacturing. *PAID RELOCATION AVAILABLE! ESSENTIAL JOB FUNCTIONS Creates complex technical proposals for customers by integrating knowledge of product, regulatory requirements, market, price point, organizational capabilities, and corporate strategy. Communicates with customer to establish understanding of customer's technical requirements and convey design capabilities, product performance, and organizational expertise. Identifies new business opportunities. Manages customer expectations and balances against internal capabilities for complex and challenging projects, processes, and products. When required, creates, and maintains project schedule, resources, and budget, which includes the generation of milestones required to complete assigned projects. Oversees the establishment and maintenance of a project quality culture that prioritizes compliance, risk management, and operational excellence. Directs the development and implementation of communication plans that effectively convey project status, risks, and successes to all stakeholders, including executive leadership Directs the development and implementation of cost estimate processes in preparation for sales quotations for customer cable assemblies to be manufactured by Amphenol CMT. Directs in a cross functional team a complete technical assessment for each project quoted, determining tooling requirements and cost, testing requirements and adapters required, level of manufacturing data required and determines if further clarification and/or documents are required from the customer. Is someone that can discover problems and present solution options to Customer technical contacts with onsite technical support involving industry standards, medical specifications, design assistance, Amphenol CMT production capabilities, and material requirements. Partner with process engineers to ensure process capabilities align with customer requirements and planned market positioning for growth. Collaborate with Sales team in communication with customers on the progress of a work order. Ensure expected yield levels are appropriate to meet customer requirements. Assist in post-shipment support, such as customer complaints and RMAs. Support Sales team during customer visits and trade shows to showcase product capabilities. *Other duties as required in support of the department and the company* SUPERVISOR RESPONSIBILITIES The responsibilities of this role do not include supervising other employees. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Bachelor's degree in engineering/sciences with 10+ years in related engineering role, required. Advanced technical degree or a degree in management/marketing field, preferred. 5+ years' minimum experience in a flexible printed circuits manufacturing unit. Background in medical industry, preferred. CERTIFICATES, LICENSES, REGISTRATIONS IPC certifications in standards or design, preferred. Project Management Professional (PMP) certification, preferred. Relevant certification in Lean Manufacturing, Six Sigma, or similar methodologies, preferred. SPECIFIC SKILLS and/ or KNOWLEDGE Strong customer focus and interaction - strong interpersonal relationship/customer skills. Exceptional communication skills (written and verbal) with emphasis on active listening and technical documentation. Able to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write technical protocols and reports. Ability to effectively present information and respond to questions from other employees, managers, or customers. Able to travel internationally. Broad engineering abilities and understanding of electrical, mechanical, and mfg/industrial engineering disciplines. Proficient in MS Office Suite and SharePoint. Knowledge of ERP systems, SAP preferred. Ability to view and modify Gerber or DXF data. Ability to read customer drawings and stackups. Excellent analytical, problem-solving, and attention-to-detail skills. Team player with the ability to collaborate with various departments. Strong communication skills to effectively convey standards and procedures. Reliable and flexible to work additional hours on short notice to complete orders or special projects to meet customer or internal demands. Able to work independently with minimal supervision. LANGUAGE REQUIREMENTS Excellent verbal and written communication skills in English. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; reach with hands and arms; talk and/or hear. The employee frequently is required to sit. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Amphenol CMT is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection in specific locations. Ability to compile with JSA in specific areas. EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL 20% to 50% - to customer sites and Amphenol CMT manufacturing sites as needed. SALARY INFORMATION: According to several states' laws, this position's salary range falls between $130k and $160k annually. However, this salary information is merely a general guideline. When extending an offer, Amphenol CMT considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. Certain roles are also eligible for additional rewards, including merit increases and annual bonus. These awards are discretionary and allocated based on individual and company performance. U.S.-based employees have access to medical, dental, and vision insurance, a 401(k) plan and company match, short-term and long-term disability coverage, basic life insurance, and wellbeing benefits, among others. U.S.-based employees also receive, per calendar year, up to 11 scheduled paid holidays, up to 80 hours of paid time off and sick paid time off.

Job Title SENIOR MECHANICAL ENGINEER-SW Job Type / Status Full-Time Education Bachelor's Degree Clearance Level Required Secret Job Description Job Title: Senior Mechanical Engineer This position will involve engineering and technical support required across several departments of the Naval Undersea Warfare Center (NUWC) Division, Keyport Washington: System Acceptance & Operational Readiness Department (Code 20): The System Acceptance & Operational Readiness Department plans, organizes, directs, and controls NUWC Division, Keyport's Test, Training and Evaluation (TT&E) of undersea warfare (USW) systems and operational readiness assessment support for acquisition and Fleet customers. Code 20 conducts system evaluation activities throughout all phases of the acquisition life cycle including technology development, system design, development, and production, and in-service readiness assessment. Undersea and Combat Systems Depot (UCSD) (Code 31): The Undersea and Combat Systems Depot (UCSD) provides repair services for mechanical, electro-mechanical, and electronics systems, assemblies, and components. The UCSD provides a continuum of expert level skills including evaluating electronic, mechanical, and electro-mechanical components for feasibility of repair, repair of items to customer specifications, reverse engineering, maintenance planning and engineering, obsolescence management, and application of new maintenance technologies. The Depot exists to ensure continuity of support often as the last resort source of repair for items abandoned by industry for business or technological reasons, past their technology lifecycle, or as an alternative supplier in cases of critical need. Rapid Prototyping and Fabrication Technology Division (Code 32): The Rapid Prototyping and Fabrication Technology Division provides engineering, production, and test services required to establish a cost effective and timely source of supply for systems, assemblies, technical data, and components of varying complexity. Code 32 also provides mitigation against obsolescence by establishing a source of supply, maintaining an organic manufacturing capability, and providing technical expertise and leadership. Leading edge technological advancement in areas related to rapid prototyping, fabrication, and custom engineered solutions (CES) are also a specialty. In-Service Engineering Department (Code 40): The In-Service Engineering Department plans, organizes, directs and controls NUWC Division, Keyport's efforts to ensure Fleet operational readiness through life-cycle support of combat and weapon systems. Code 40 provides In-Service Engineering Agent (ISEA) and other technical authority functions as assigned, including design, production, test, fielding, sustainment, and improvement modifications. Capabilities include systems engineering, Fleet technical support, lifecycle logistics, obsolescence management, and acquisition engineering support. Program responsibilities include submarine systems, Naval training systems, undersea warfare weapons and vehicles, and surface warfare systems. Products and services include commercial-off-the-shelf (COTS) integration and supportability, software development, technology refreshment, obsolescence management, advanced training systems, distance support, logistics support, direct waterfront support, information assurance (IA)/cyber security, and information systems. Code 40 also provides systems and project engineering leadership for assigned integrated warfare systems technical programs and project team leadership on traditional and non-traditional work assignments, including technology insertion of aircraft carrier and surface combat systems and air and surface ship acoustic sensors, standard equipment, COTS hardware and software, and supply agent projects. Job Requirements A bachelor of science degree in mechanical engineering or higher, is desired. A minimum of seven years of experience in mechanical engineering for complex systems, including design,development, integration, and test is desired. A master of science degree in an appropriate field may be substituted for two years of experience. Experience in mechanical engineering development standards and techniques including geometric dimensioning and tolerancing (GD&T) are desired. Experience with electro-mechanical components / systems, configuration management, and computer aided design (CAD) systems is desired. For example, experience with Solid Edge/Solid Works, or equivalent, risk identification and mitigation, MATLAB, LabVIEW, T&E analysis, electronics packaging design, and tooling and fixturing design. U.S. citizenship and eligibility for a security clearance required; current clearance a plus. Preferred Qualifications: U.S. Navy submarine/underwater warfare system experience a plus. The ideal candidate will have an understanding of military specifications and requirements, drawings and other documents used to support military systems. Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. MRC offers a competitive benefit plan to employees and their eligible family members that includes health, dental, vision, life, and disability plans, paid holidays, accrued leave, accrued vacation, 401K, profit sharing, as well as, any other state or federally required benefits. The hiring wage range is $ 42.00-$58.00 per hour.

Amazon Logistics Rural Network (RSR) is undergoing growth at an unprecedented level on a global scale. Our logistics teams are changing the way we interact with customers around the globe every single day and solving some of the biggest logistical challenges facing not just Amazon, but the entire industry. In order to meet the needs of millions of customers worldwide in an environment where speed is of the essence, we are consistently looking for the next breakthrough or innovation which will disrupt the delivery business and enable a step change in the way millions of customers get their orders. Amazon is seeking a Senior Process Engineer to support the RSR Process Engineering team. This individual will be the owner of processes and products ensuring delivery to the vision of the next generation of RSR delivery station. This is a unique opportunity at a critical juncture in Amazons growth to drive end to end product delivery from inception to execution. We are looking for a hands-on leaders with experience managing new product and process development for high dollar value programs. To be successful in this role you will need to be able to influence and work with senior leaders across multiple organizations and geographies. You will work with organizations such as Worldwide (WW) Engineering and Design, WW Tech SME, Last Mile Delivery and Tech as well as Operations and Safety to innovate at scale and drive the development roadmap. You will manage large, complex initiatives, deal with ambiguity and advocate on behalf of the customer to develop the next generation of RSR delivery stations. Responsibilities include: - Initiate, define, plan and manage the roll out of the product features and enhancements for the next generation of RSR Delivery Stations. - Work closely with a partner teams in Engineering, Tech and Operations to build impactful products - Identify new programs to onboard and integrate. - Lead execution of the product with high-level of discipline and engagement with the product development teams. - Present concepts, designs, program updates and roadmap to senior leadership on a frequent basis. Strong written and verbal communication skills. - Hold partner teams accountable for delivery of project roadmap. Own a part of the vision of the next generation RSR DS roadmap, including execution. Meet defined milestones and delivery dates. - Drive a culture of innovation across the RSR Strategic Planning and Process Engineering Org. - 30% travel based on business needs Strategic Planning and Process Engineering Org. - 30% travel based on business needs BASIC QUALIFICATIONS- 5+ years of directly managing and responsible for multiple large projects experience - Bachelor's degree - Experience and strong technical background in relevant fields of automated or non-automated material handling equipment PREFERRED QUALIFICATIONS- Master's degree in engineering, mechanical, operations, supply chain, business administration, or equivalent STEM field - Experience in Lean Management, Six Sigma and other operations engineer tools Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $107,600/year in our lowest geographic market up to $177,900/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity. As the Equipment Engineer for an Equipment Group at Amazon Leo, you will be directly responsible for the technical activities in driving improved equipment uptime, availability, and capability improvement for equipment that supports manufacturing our next generation spacecraft. You'll be responsible for the full equipment lifecycle for key integration and test equipment, from requirements specification, design concept, sourcing, integration, qualification, pilot operation, long term OEE improvement projects, and ultimately end-of-life services associated with the equipment you support. You will leverage your expertise in electro-optical systems development & maintenance to ensure smooth integration & high system availability. You'll use data & analysis to produce preventative maintenance programs, troubleshoot protocols, critical spares plans, etc. You'll be a key animating force in the increase in production capacity through vision & execution of capital investment for production scaling & automation of additional equipment as required. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Develop system requirements, and partner with development groups to drive detail design of new equipment • Participate in sourcing plans for complex equipment (COTS & custom) • Lead equipment integration & site acceptance testing • Develop troubleshooting, preventative maintenance, and spares plans for equipment • Support 2nd line escalation of critical equipment downtime • Specify & develop facilities interface requirements (power, network, space, LN2/GN2, PCW) Train & support equipment technicians responsible for routine maintenance, troubleshoot, etc. BASIC QUALIFICATIONS- Experience with prototyping and implementation - Bachelor's degree in electrical engineering or equivalent - Experience reading & developing rack elevation diagrams, wiring diagrams, GD&T etc. - Experience with Programmable Logic Controller (PLC) & Data Acquisition (DAQ) Systems PREFERRED QUALIFICATIONS- Experience in the design of complex mechanical products and equipment at volume - Experience developing equipment maintenance protocols, including Preventative Maintenance activities, Troubleshooting Runbooks, Spare Equipment Plans, etc. - Experience with Fiber Optic Assemblies, Optical Test Systems, and Optical Metrology Equipment Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Who We Are Coughlin Porter Lundeen is a civil and structural engineering firm. Focused in the Pacific Northwest, we partner with clients across markets to bring unique project visions to life. We were founded with the goal of exceeding the standards and services provided by engineering firms. And today, almost 30 years later, that vision continues to guide all that we do. Our core values are the heart of who we are and guide how we work each day. Commitment to Quality, every drawing, every detail. Creativity, from project solutions to the way we define our roles. A “Client-First” Mindset, cultivating long-term partnerships. An Empowered Team, continued learning and development. Collaboration and Respect, with our clients and within our own professional work environment. Community, supporting the causes most important to our staff and city. Description Coughlin Porter Lundeen is seeking a structural staff engineer; this position involves the design and preparation of construction documents on diverse project types including a variety of building materials. As an integral member of the design process, structural engineers are challenged to develop project management skills, lead in-house design teams, and work firsthand with a diverse range of clients. Engineers are involved with every aspect of the project from design through construction. This position requires sound technical skills, strong communication skills, and a professional attitude. Required Qualifications BSCE or MSCE degree (MSCE Preferred) 0-4 years structural design experience Licensure: Minimum EIT required and in process to get P.E. Requires effective interpersonal, communication, and presentation skills. Must have initiative, be resourceful, and able to work independently. Must be able to effectively prioritize, manage time and projects, and multi-task in a demanding, fast-paced environment. Works effectively as an individual or as part of a project team. Requires fluency in English with strong verbal and written skills. Must be able to effectively collaborate with all levels of management, staff, and clients in diverse environments. Must be proficient in the MS Office Suite of software. Adherence to our core values. Ability to drive locally and travel domestically as needed. Physical Requirements Ability to drive as needed to client project locations (primarily in the greater Seattle area). Able to travel by airplane domestically as needed for client projects (outside the greater Seattle area), campus recruiting, conferences, etc. Requires sitting for extended periods of time at a computer, keying and reading content. Will be required to stand, reach, bend, twist, squat, and move about freely in an office environment. May need to be able to lift up to 25 lbs. Able to use office equipment such as phone, copier, printer, etc. Benefits and Compensation $80,000-90,000 per year (depending on experience and qualifications) Additional compensation for hours worked in excess of 40 hours weekly (paid quarterly) Medical (HSA with employer contributions), dental and vision Company paid life and AD&D insurance Company funded ORCA card PTO (15 days starting) 8 paid national holidays (including 1 floating holiday) 401(k) matching Annual bonuses and profit sharing (at company discretion) Monthly health and wellness stipend Employee assistance program Additional information regarding our workplace and benefits can be found here.