Manufacturing lead technician jobs near me - 258 jobs

SummaryWe are seeking a highly skilled and experienced External Manufacturing Leader to oversee and manage relationships with external manufacturing partners across various sites, specifically those involved in the production of radiotracers. The ideal candidate will have a deep understanding of regulatory frameworks, including 21 CFR 212, and familiarity with radiopharmaceuticals, radiopharmacies, and Board of Pharmacy requirements. This role will focus on ensuring safety, quality, compliance, delivery, speed, and cost across these manufacturing sites while managing the complexities of radiotracer production.Job DescriptionRoles & Responsibilities: Serve as the primary point of contact and key liaison between the company and external manufacturing partners, particularly those involved in radiotracer production Cultivate and maintain strong, effective relationships with external manufacturing sites to ensure consistent, high-quality production and compliance. Lead and participate in regular business reviews, aligning the external manufacturers' performance with corporate goals, and addressing any issues proactively. Safety & Compliance: Ensure all external manufacturing operations adhere to safety regulations, particularly in the production of radiotracers, and comply with environmental, health, and safety (EHS) guidelines. Monitor and enforce compliance with 21 CFR 212 (for the production of radiopharmaceuticals), FDA regulations, and other relevant guidelines, ensuring all manufactured radiotracers meet stringent regulatory standards. Oversee adherence to the Board of Pharmacy regulations, particularly with respect to radiopharmacies and the handling of radiopharmaceuticals. Quality & Delivery Assurance: Manage the quality assurance processes to ensure the consistent production of high-quality radiotracers in compliance with GMP, FDA, and other regulatory requirements Ensure timely and accurate delivery of radiotracers, working with external manufacturers to address any issues related to production delays or capacity. Collaborate with the quality assurance team to resolve deviations, implement corrective and preventive actions, and continuously improve quality control processes. Speed & Cost Management: Optimize manufacturing processes to balance speed-to-market needs with cost-effectiveness, particularly for the production of radiopharmaceutical products. Work closely with external manufacturers to drive cost-saving initiatives while maintaining high quality and compliance standards. Ensure that external manufacturing costs are managed effectively, including negotiating pricing and terms with vendors to align with the company's financial objectives. Risk Management: Proactively identify and mitigate risks related to external manufacturing operations, including production, regulatory compliance, and supply chain risks, especially with radiotracers. Develop and implement contingency plans to address potential disruptions in radiotracer production, supply chain issues, or regulatory changes. • Cross-functional Collaboration: Collaborate with internal teams, including Supply Chain, Operations, Regulatory Affairs, and R&D, to ensure alignment and smooth operations across external manufacturing activities. Provide leadership and regular updates to senior management on the performance of external manufacturers, focusing on key issues, risks, and solutions. Performance Metrics: Define, monitor, and report on key performance indicators (KPIs) for external manufacturing performance, ensuring alignment with business goals for radiotracer production. Track and report on the performance of external partners to drive continuous improvement in quality, safety, cost, speed, and compliance. Required Qualifications: Bachelor's degree in Engineering, Pharmaceutical Sciences, Life Sciences, Chemistry, or related field; advanced degree (e.g., MBA, Master's in Supply Chain, or similar) preferred. Experience: 8+ years of experience in external manufacturing or operations management within regulated industries such as pharmaceuticals, biotechnology, or radiopharmaceuticals. Proven track record in managing relationships with multiple external manufacturing sites, including contract manufacturing organizations (CMOs). Solid experience in quality management, compliance, and driving continuous improvements in manufacturing operations, particularly in regulated environments. Demonstrated success in optimizing production processes for speed and cost while maintaining high regulatory standards. Desired Qualifications: In-depth experience with radiotracers, radiopharmacies, and 21 CFR 212 regulations, including handling and production of radiopharmaceuticals. Extensive knowledge of 21 CFR 212, FDA regulations, and GMP as they apply to radiopharmaceuticals and external manufacturing. Strong understanding of radiopharmacy operations, Board of Pharmacy requirements, and the handling of radiotracers in accordance with industry standards. Strong leadership, interpersonal, and communication skills to effectively manage cross-functional teams and external partners. Excellent problem-solving, negotiation, and conflict resolution skills. Ability to analyze complex data, identify areas for process improvement, and implement actionable solutions. Familiarity with Lean Manufacturing, Six Sigma, or other continuous improvement methodologies. Proven ability to manage multiple projects simultaneously and prioritize tasks effectively. Strong knowledge of SAP, Oracle, or other ERP systems is a plus. • Preferred Qualifications: Experience in managing global manufacturing operations, particularly in the production of radiotracers. Prior experience working in a radiopharmaceutical company or a similar regulated manufacturing environment. Certification in quality management or project management is a plus. We will not sponsor individuals for employment visas, now or in the future, for this job opening. For U.S. based positions only, the pay range for this position is $140,000.00-$210,000.00 Annual. It is not typical for an individual to be hired at or near the top of the pay range and compensation decisions are dependent on the facts and circumstances of each case. The specific compensation offered to a candidate may be influenced by a variety of factors including skills, qualifications, experience and location. In addition, this position may also be eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). GE HealthCare offers a competitive benefits package, including not but limited to medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, life, disability, and accident insurance, and tuition reimbursement.Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No Application Deadline: February 09, 2026

Shapes Technician/Production. Allied Mineral Products, Inc. is a leading manufacturer of monolithic refractories worldwide, headquarters in Columbus, Ohio. Due to our continued growth we are looking for technicians in our Shapes department to work: 1st shift Mon - Fri 6:00 am - 2:30 pm Pay range: $20.25 - $28.16 We are looking for energetic, motivated and results-driven individuals to join our Team. Duties and Responsibilities Receives, inspects and evaluates all raw materials. Assists in the development, revision, etc. of raw materials as needed. Responsible for completing daily assignments to meet customer demands for production. Stages materials for daily production demand and weighs all production batches including additives. Assists in the training of any new employees as needed. Reads and interprets water charts for production recipes. Assists in maintaining an orderly plant layout - cleans and organizes areas as necessary. Interacts with vendors when necessary. Cleans mixer and staging areas. Makes sure the area is ready for the next day's staging of materials. Assembles forms using hand tools and power tools. May use various glues, adhesives and other bonding agents; grease and other form release agents; screws, bolts and other fasteners. Materials used to construct the form may include wood, rubber, steel, plastics and/or Styrofoam. As required by production (based on QA checks or problems), repairs forms using hand tools, power tools, and necessary materials typically used in form construction. Reviews blueprints/sketches of shape specifications. Compares assembled forms and finished shape measurements to blueprints to evaluate quality. Uses lifting equipment to move shapes and forms as needed. Uses hand tools and power tools to finish shapes prior to drying. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. Minimum Qualifications: Strong work ethic Dependable and able to follow instructions Great attention to details Ability to read/use a tape measure Ability to evaluate 3D shape against written specifications Good math skills Ability to routinely lift 50+ lbs. Must be able to read, speak and write English Outstanding Attendance Production or Forklift experience a plus Must be at least 18 years old Allied offers: Competitive wages Health Insurance: medical, vision, dental, and STD, LTD. Company contribution to a Health Savings Account. Employee Stock Ownership Plan (ESOP), 401K, profit sharing, and other. Tobacco free environment Tuition reimbursement Onsite fitness facility Family/Company events Vacation, holidays, and personal time off paid. Allied Mineral Products offers competitive wages, health, dental, STD, LTD and ESOP retirement plan and profit sharing. The ability to pass a drug screen and physical (to wear a respirator) is required prior to starting work should an offer be made. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

For one of our ongoing project, we are looking for an Oracle Cloud Lead - MFG Costing Position is based out of East Coast but can be done from anywhere in EAST Coast Remotely. Must have deep understanding of the Oracle Cloud Cost Management for planning, cost accounting, and analysis of manufacturing costs for the discrete or process manufacturing work method. Sound knowledge on work definitions to use in costing, efficiently enter material and resource including various costing methods like standard, actual, and FIFO (first-in, first-out). Good to have Oracle Cloud SCM knowledge Knowledge in Oracle Manufacturing Cloud and Oracle Cost Management Cloud

Mavericks Wanted When was the last time you achieved the impossible? If that thought feels overwhelming, you might want to pause here, but if it sparks excitement...read on In 2015, we pioneered a “moneyball for biotech” approach, pooling projects and promising early-stage research from academia together under one financial umbrella to reduce risk and unleash innovation. This model allows science and small teams of experts to lead the way. We build bridges to groundbreaking advancements in rare disease, and develop life-changing medicines for patients with unmet needs as fast as humanly possible. Together we define white space, push boundaries and empower people to solve problems. If you're someone who defies convention, join us and work alongside some of the most respected minds in the industry. Together, we'll ask "why not?" and help reengineer the future of biopharma. What You'll Do This individual will be the account manager for drug product manufacturing at CMOs for BridgeBio's Attruby program. Responsibilities include oversight of day-to-day manufacturing activities as the technical and operational lead, which includes commercial routine manufacturing, technical transfer (including process validation activities), documentation review/batch disposition, quality event support etc. This individual will work with colleagues in DP Formulation/CMC, Analytical Operations, Supply Chain, Quality Assurance, Quality Control, RA CMC etc, while serving as an important point of technical contact between Eidos and the CMOs. Responsibilities Day-to-day activity oversight of commercial DP CMOs for small molecule solid-oral dose manufacturing and release of bulk DP, in collaboration with various CMC functions Holds teleconferences with CMO and suppliers; takes meeting minutes, tracks action items, creates workflows for complex and interdisciplinary CMC procedure and processes. Ensures delivery of DP batches on time and in full in accordance to supply plans Leads or supports documentation review and approval (MBRs, specs, methods), change controls and documentation for batch disposition Oversees investigations related to deviations and complaints, with proper evaluation of impact to product and processes. Manages the close out of the investigations in a timely manner with the proper root cause analysis and establishment of appropriate CAPAs Identifies and leads key process problem resolution activities and process improvement initiatives, resolves issues. Candidate must have technical (formulation/chemical engineering) background of small molecule tablet manufacturing on commercial, large scale production (process, equipment, analytical etc) Create and disseminate technical transfer information and documents required by CMOs for feasibility, transfer, validation and routine manufacturing Partner with CMC/QA/QC/RA CMC functions to develop and operate appropriate CMC procedures, ensure product meets established quality standards, adheres to established approved parameters filed in various regions. Works closely with supply chain group to design production schedules while maximizing production and cost efficiencies Where You'll Work This is a U.S. based remote role that will require quarterly, or as needed visits to our San Francisco Office. Who You Are BS/MS (Life Sciences, Engineering) with at least 5-7 years relevant experience in commercial bulk DP manufacturing (preferably solid oral dose of small molecule) and analytical activities required in commercial DP manufacturing CMO management or experience within manufacturing plant (experience in commercial manufacturing; engineering knowledge at industrial scale) Experience in formulation development, process validation and tech transfer in support of marketing applications. Working knowledge of modern analytical methods pertaining to small molecule DP Project leadership experience with cross-functional CMC experience. Ability to effectively interface with highly skilled internal staff, ability to build good work relationships while being able to work independently Familiarity with FDA and ICH guidelines, such as 21CFR210 and 211, and thorough understanding of cGMP, quality and regulatory requirements, including the preparation and writing of key sections of regulatory documents (such as NDAs, MAAs and INDs) Understanding of supplier performance management (KPI, quality metrics, adherence to supply and quality agreements etc) as well as metric selection, measurement and analysis Self-motivated individual with strong attention to detail and time management skills with excellent oral and written communication skills Up to 25% travel may be required; may function as a technical person in plant during production and during tech transfer activities Rewarding Those Who Make the Mission Possible We have high expectations for our team members. We make sure those working hard for patients are rewarded and cared for in return. Financial Benefits: Market leading compensation 401K with 100% employer match on first 3% & 50% on the next 2% Employee stock purchase program Pre-tax commuter benefits Referral program with $2,500 award for hired referrals Health & Wellbeing: Comprehensive health care with 100% premiums covered - no cost to you and dependents Mental health support via Spring Health (6 therapy sessions & 6 coaching sessions) Hybrid work model - employees have the autonomy in where and how they do their work Unlimited flexible paid time off - take the time that you need Paid parental leave - 4 months for birthing parents & 2 months for non-birthing parents Flex spending accounts & company-provided group term life & disability Subsidized lunch via Forkable on days worked from our office Skill Development & Career Paths: People are part of our growth and success story - from discovery to active drug trials and FDA pipelines, there are endless opportunities for skill development and internal mobility We provide career pathing through regular feedback, continuous education and professional development programs via LinkedIn Learning, LifeLabs, Spring Health & BetterUp Coaching We celebrate strong performance with financial rewards, peer-to-peer recognition, and growth opportunities At BridgeBio, we strive to provide a market-competitive total rewards package, including base pay, an annual performance bonus, company equity, and generous health benefits. Below is the anticipated salary range for candidates for this role who will work in California. The final salary offered to a successful candidate will depend on several factors that may include but are not limited to the type and length of experience within the job, type, and length of experience within the industry, educational background, location of residence and performance during the interview process. BridgeBio is a multi-state employer, and this salary range may not reflect positions based in other states. Salary$129,000-$177,000 USD

Mars Petcare- Manufacturing Maintenance Lead- Columbus, OH Pay Range: Based on experience: $43- $57/hour & $1.50/hour shift premium Sign On Bonus: $5,000K This site manufactures petfood: Pedigree, Cesar, Nutro, Iams, Whiskas and Sheba. Shift Schedule: Rotating Shift (must be available for all) 1st Shift Saturday-Sunday: 7:00 AM - 7:30 PM Monday-Friday: 7:00 AM - 3:30 PM Weekend Off 2nd Shift Monday-Friday: 3:00 PM - 11:30 PM Weekend Off 3rd Shift Monday-Friday: 11:00 PM - 7:30 AM Saturday-Sunday: 7:00 PM - 7:30 AM 5 Days Off Monday- Friday Description of Role: This role includes indirect oversite of planning, maintenance, and troubleshooting of the site's manufacturing equipment, utilities, and factory infrastructure. This role also includes coaching and developing of the associates on team. What are we looking for? Minimum Requirements: High school diploma, GED or higher 3+ years' experience in a maintenance technician related role Mechanical disciplines (including hydraulic and pneumatic systems) Experience in electrical disciplines (such as AC/DC electrical systems from 4-20mA to 480 VAC, variable frequency drives (VFDs) and 3-phase power) Familiar with PLC controls Demonstrated ability to develop and coach peers Physical Requirements: Can perform the essential functions of the job with or without reasonable accommodation. Frequent lifting/carrying (10-50 lbs) and pushing/pulling (50-300 lbs) Frequent bending, stooping, twisting, handling, and gripping. Ability to work at elevated heights, climb stairs, lean over equipment, and operate in confined spaces. Ability to stand and work on feet for extended periods, with shifts lasting 12 hours Capable of working in hot, cold and wet conditions Proficient in understanding, communicating, reading, and writing in English. Preferred Qualifications: Technical degree or relevant certification Industrial electrical experience Over 5 years of experience maintaining and troubleshooting process and packaging systems Prior manufacturing experience Proficient in PLC and instrumentation troubleshooting What will be my Key Responsibilities? Assist technicians in troubleshooting, repairing, replacing, and calibrating electrical sensing devices and instrumentation, including: Photoelectric, inductive, capacitive, pressure, temperature and weight, position sensors Flow and analytical instruments 480V electrical power systems Instrumentation, motor controls, VFDs, servos, I/O devices/modules, PLCs, and HMIs Indirectly coach, coordinate and develop the technical team Support factory utilities infrastructure, including air compressors, boilers, chillers, and wastewater systems Perform ad hoc requests as needed Total Rewards Pay: Based on experience between $43- $57/hour Shift Differential: $1.50/hour Sign on Bonus: $5K Annual Bonus and Merit Increases Benefits Starting Day One: Medical, Vision, and Dental Up to 6% 401(k) match Vacation time Tuition reimbursement Short/Long-Term Disability 18 weeks parental leave What can you expect from Mars? Work with diverse and talented Associates, all guided by the Five Principles. Join a purpose driven company, where we're striving to build the world we want tomorrow, today. Best-in-class learning and development support from day one, including access to our in-house Mars University. An industry competitive salary and benefits package, including company bonus.

Duties and responsibilities: Hands on leader, able to run the machines as an operator can to fill voids in the schedule Oversee and coordinate daily manufacturing activities, ensuring production schedule and quality standards are met Assign tasks to team members, monitor progress, and adjust resources as needed to optimize efficiency Ensure proper use of machinery, tools, and equipment to maintain high productivity Identify and resolve production issues promptly and minimize downtime Lead, train, and mentor production team members to enhance skills and performance Assist in performance evaluations and provide constructive feedback Foster a positive and collaborative work environment, promoting teamwork and accountability Address employee concerns and escalate issues to management when necessary Implement and support continuous improvement initiatives. Monitor product quality and ensure adherence to company standards. Maintain accurate records of production output, quality checks, and equipment maintenance Work with the Quality Assurance team to ensure products meet standards Provide assistance with production planning as needed Make sure that all materials are available for daily production, including reviewing next day's work orders Anticipate or resolve any issues that may hold up production. Communicate effectively with upper management regarding production status and challenges Any other duties as assigned by Supervisor Needed experience & technical knowledge: Experience with Microsoft Excel preferred Familiar with hand tools, measurement scales standard and metric Dedicated to making quality products Strong organizational and time management skills Interested in making continuous improvements Ability to coach others while providing hands-on contribution Physical Demands The physical demands described here and above are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions of the position. They must have the ability to communicate information and ideas so others will understand. .Must have the ability to observe details at close range Work Environment The work environment characteristics described here and above are representative of those that an employee encounters while performing the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions of the position. Disclaimer The preceding has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this position. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time 6:30AM - 3:00PM

As a Senior Manager / Director - Global Sheet Metal Fabrication SME at Vertiv, you will lead strategic initiatives to advance our global data center infrastructure capabilities through expert-level knowledge of sheet metal fabrication. This role is responsible for developing and executing a global strategy for sheet metal processes, assessing fabrication technologies, recommending equipment, and optimizing internal production workflows. You will collaborate across engineering, operations, and supply chain teams to drive innovation, standardization, and continuous improvement in sheet metal manufacturing. A key focus will be building a high-performing global community, sharing best practices, and implementing both short-term improvements and long-term strategic roadmaps. Responsibilities Design, develop, and implement a Global Sheet Metal Fabrication Strategy aligned with Vertiv's operational and product goals. Lead end-to-end process optimization initiatives to improve efficiency, precision, and quality in sheet metal production across global facilities. Collaborate with cross-functional teams to drive innovation, integrate automation technologies, and elevate fabrication capabilities. Establish and promote standardized procedures to ensure consistency, reliability, and excellence in sheet metal operations worldwide. Stay current with industry trends and emerging technologies, guiding their integration into Vertiv's manufacturing ecosystem. Provide technical leadership to troubleshoot manufacturing challenges, enhance product designs, and support cost-reduction efforts. Partner with the Advanced Manufacturing Technology team to implement future/connected factory technologies and digitization initiatives. Drive strategic project management of global initiatives, balancing short-term optimization with long-term roadmap execution. Foster a culture of best practice sharing and build a global community of sheet metal experts to support continuous improvement. Contribute to the design and implementation of cutting-edge solutions that position Vertiv as a leader in data center infrastructure. Qualifications Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field; advanced degree preferred. Minimum 15+ years of experience in sheet metal fabrication, with proven success in a global leadership or SME role. Deep expertise in metal fabrication technologies, equipment selection, design principles, and manufacturing processes. Demonstrated ability to standardize procedures and drive operational excellence across multiple global sites. Strong background in strategic project management, with experience leading global initiatives and transformation programs. Proven track record of collaborating across functions, providing technical leadership, and driving cost-effective solutions. Experience with connected factory technologies, automation, and digital manufacturing systems. Strong analytical and problem-solving skills, with the ability to guide innovation and troubleshoot complex manufacturing issues.

With over 35 years of cross-industry management consulting experience, DeWolff, Boberg & Associates has successfully provided services to a variety of clients worldwide and has conducted over 700 projects in 20 countries. Management Consultants gain exposure to Fortune 500 companies in various industries and work side by side, “on the floor”, coaching frontline managers and supervisors in behavioral changes that drive sustainable performance and financial improvements. Armed with training in our proven methodology and the knowledge gained as previous business leaders, Management Consultants customize solutions for our client's existing people, processes and business environments to help them achieve dramatic improvements in productivity, quality, service and profitability. This position requires 100% weekly, Sunday-Friday travel to designated project locations. We focus on implementation and transformational change and deliver value by: Professionally service client organizations to solve business issues, create value, maximize growth and improve overall performance for sustainability Quickly become familiar with client business challenges and technologies to understand the environment for behavioral changes Gather, organize and analyze data regarding key business drivers to present information in a manner that is meaningful to clients by using metrics and analytics to guide organizational decision-making Thoroughly understand client resource utilization to identify waste in time and resources to provide operational and performance improvement opportunities Openly, respectfully and professionally discuss business and organizational shortcomings with clients to provide valuable feedback and influence solutions for long-term sustainability Empower frontline accountability of actions, roles and responsibilities by guiding clients through self-explorations of their business segments and staff utilization Collaborate with frontline leaders on a daily basis to improve leadership and management behaviors Effectively coach clients to approach their business issues as forward thinkers to exude confidence for improving behaviors and process efficiencies Assist the client with tool building and/or modification Foster a spirit of teamwork and unity among project team members that allows for healthy disagreements - expeditiously resolve conflicts by approaching with positive cohesiveness, supportiveness and working effectively together to enable the overall team to succeed Travel and Per Diem: All travel reward points and air miles earned personally belong to each Management Consultant and can be used as preferred Weekend travel flexibility including company paid companion flights or other city destination accommodations All employees are eligible to receive a pre-tax biweekly travel reimbursement per diem while working at a client site provided they stay at project site hotel A pre-tax biweekly allowance is included for parking and transportation fare to and from employees' home airport Benefits: DB&A has a competitive benefits package and offers 2 plan options that pays 100% of medical premiums for employee Medical, dental, vision, short & long-term disability Insurance, FSA, 401(k) Two weeks paid vacation + one week paid PTO + paid year-end holiday closure Advancement Opportunities: At DB&A, our people are our greatest asset which is why we believe strongly in the internal growth and development of our employees. As a Management Consultant, individuals have the opportunity to drive their careers based on performance and contributions. We offer a three-tier Consultant Career Track and a Project Manager Career Track with the ability to advance directly from Senior Consultant to Project Manager. As a Project Manager, there is also upward potential to become a Chief of Operations and/or a Shareholder of DB&A. Our remarkable team consists of highly competitive and committed business professionals who are passionate about building life-long rewarding careers with us. Professional Requirements: Bachelor's Degree in Business, Management, Engineering or related field Minimum of 5 years of direct supervision and management experience (Manufacturing, Distribution or Engineering industries preferred) Demonstrated ability to manage conflict, build consensus and facilitate problem-solving and collaboration amongst cross functional teams Strong observation, analytical, numerical reasoning, business acumen and leadership skills Strong facilitation skills and ability to build relationships and interface with clients at all levels of the organization Ability to balance delivery of results, problem solving and client management Ability to juggle many responsibilities at one time to effectively partner with clients throughout the project lifecycle Develop a high level of personal and professional credibility with all levels of the organization and external client Ability to adapt to fast-paced, high pressure and changing environments Exceptional communication (verbal, written and presentation) skills Ability to succeed in a team environment and deliver/receive daily constructive feedback Advanced proficiency in MS Office Suite specifically Excel Ability to pass a pre-employment background, criminal, financial/credit and drug screening The Equal Employment Opportunity Policy of this corporation is to provide a fair and equal employment opportunity for all job applicants regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status or disability. Our corporation hires and promotes individuals solely on the basis of their qualifications for the job to be filled. This corporation believes that all employees should be provided with a work environment which enables each team member to be productive and to work to the best of his/her ability. We do not condone or tolerate an atmosphere of intimidation or harassment based on race, color religion, national origin, gender, sexual orientation, age, marital status or disability. We expect and require the cooperation of all employees in maintaining a discrimination and harassment-free atmosphere.

Job Description Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Beckman Coulter Diagnostics, one of Danaher's 15+ operating companies, our work saves lives-and we're all united by a shared commitment to innovate for tangible impact. You'll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact - innovating at the speed of life. As a global leader in clinical diagnostics, Beckman Coulter Diagnostics has challenged convention to elevate the diagnostic laboratory's role in improving patient health for more than 90 years. Our diagnostic solutions are used in routine and complex clinical testing, and are used in hospitals, reference and research laboratories, and physician offices around the world. Every hour around the world, more than one million tests are run on Beckman Coulter Diagnostics systems, impacting 1.2 billion patients and more than three million clinicians per year. From uncovering the next clinical breakthrough, to rapid and reliable sample analysis, to more rigorous decision making-we are enabling clinicians to deliver the best possible care to their patients with improved efficiency, clinical confidence, adaptive collaboration, and accelerated intelligence. Learn about the Danaher Business System which makes everything possible. The Technician Production Operations is responsible for maintaining and repairing equipment throughout reagent operations to a high level. This position reports to the Filling Manager and is part of the Technical Support Team located in Chaska and will be an on-site role. In this role, you will have the opportunity to: Install, diagnose, repair, and maintain a variety of equipment related to production. This includes, but not limited to, motors, pumps, relays, and other equipment. Perform routine preventative maintenance on all production equipment and machinery. Install and maintain a variety of machine tools and equipment with minimum direction. The essential requirements of the job include: Minimum 1+ years of work experience Knowledge of mechanical systems and their functions A two-year associate's degree or higher degree Travel, Motor Vehicle Record & Physical/Environment Requirements: if applicable for role Required lifting weight: minimum of 35 lbs. daily Required to stand for long periods of time (up to 8 hours) Frequently twist and bend and use tools It would be a plus if you also possess previous experience in: Trade school degree in Electrical Engineering Technology, Mechatronics, Industrial Automation, or Manufacturing Engineering Technology Ladder Logic and Structured Text programming; familiarity with SCADA and HMI systems Electrical schematics and wiring, Knowledge of sensors, actuators, and industrial networks Beckman Coulter Diagnostics, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info. At Beckman Coulter Diagnostics we believe in designing a better, more sustainable workforce. We recognize the benefits of flexible, remote working arrangements for eligible roles and are committed to providing enriching careers, no matter the work arrangement. This position is eligible for a remote work arrangement in which you can work remotely from your home. Additional information about this remote work arrangement will be provided by your interview team. Explore the flexibility and challenge that working for Beckman Coulter Diagnostics can provide. The hourly range for this role is $26.44/hr - $33.65/hr. This is the range that we in good faith believe is the range of possible compensation for this role at the time of this posting. This range may be modified in the future. This job is also eligible for bonus/incentive pay. We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.

Hungry for a new career? Imagine...working for a company that knows that its people are the key to its success in the marketplace. A company in which achieving extraordinary results and having stimulating work experience are part of the same process. We cultivate and embrace a diverse employee population. We recognize that people with diverse backgrounds, experiences and perspectives fuel our growth and enrich our global culture. We are looking for an individual who enjoys working in a fast-paced, team-oriented environment, likes to be challenged, and values the opportunity to make a difference. We are looking for a Manufacturing Supervisor that supervises hourly associates working in the manufacturing department making sure they complete their duties and follow all QA and safety procedures in a timely manner with the least possible waste. RESPONSIBILITIES: Supervise and direct associates in performing job duties and ensure assigned tasks are completed. Enforce, develop and maintain safe working practices for all production associates. Develop and train production associates in their respective work areas. Provide guidance and input to associates about career development feedback and opportunities. Counsel production associates on job performance and implement or make recommendations on disciplinary actions as necessary. Conduct performance reviews and other periodic performance feedback. Responsible for hiring, managing, disciplining and terminating associates. First Shift: Early morning machine component and associate set-up. Review daily production schedule. Ensure daily paperwork and documentation is completed on a timely and accurate manner. Ensure the use of correct products at the correct settings. Ensure that product produced is of the highest quality watching for proportions and correct placement of components in each sandwich. Monitor sanitation to verify constant removing of waste, garbage and other material from the floor. Return to stock items not used during the day. Complete resource planning to ensure we have needed staffing daily to ensure completion of orders. Review and verify accuracy of associate time punches in ADP. Review cost of goods and variance reports. Plan/schedule next day's production run. Responsible for maintaining HACCP compliance for department. This position is primarily responsible for directly supervising production associates and/or temporary associates. Other duties as assigned. Regular and predictable attendance is an essential function of this position. QUALIFICATIONS: Associate's degree (A.A.) or equivalent from two-year college or technical school; or two years of related experience and/or training; or equivalent combination of education and experience. Must be able to communicate in English, fluency in other languages is preferred. Knowledge of and training in Good Manufacturing Practices (GMPs). Safe Food Handling knowledge and training, manufacturing or production techniques. Understanding of HACCP requirements. BENEFITS: SK Food Group provides competitive salaries and a wide variety of benefits including programs that provide for your health and welfare, help you prepare for retirement and truly enable you to balance your work and family life. Medical, Dental & Vision Insurance Associate Bonus Programs Family & Friends Referral Bonuses DailyPay - Access Earned Pay Sooner 401k Retirement Plan with company match Paid Time Off and Paid Holidays Paid Parental Leave Health & Dependent Care Flex Spending Accounts Dependent scholarship opportunities Educational Tuition Assistance ABOUT US: Established in 1943, the SK Food Group is a leader in the food manufacturing and wholesale food sales industry. We produce a complete line of products for many different market segments including retail, convenience stores, vending and the transportation industry. In addition, we pride ourselves on the sub-contract manufacturing and private labeling capabilities our company offers to customers throughout the United States. Please visit ************************** for more information.

+ Role will support the execution of manufacturing/quality systems such as continuous improvement, technology transfer / new product introductions, manufacturing process/procedures, risk assessments, process validation, training, and non-conformance. They will apply process, operational, scientific expertise, basic compliance knowledge, and analytical and troubleshooting skills to support operations. You may also serve as the primary production process owner for process support systems and assist with process ownership responsibilities on more complex process systems. **Responsibilities may include, but are not limited to:** + Bring continuous improvement initiatives for cost reduction or cycle time reduction and participate in the assessment or implementation of such special projects or initiatives. + Support process monitoring parameters and control limits based off KPIs and recommend improvements. Collect process-monitoring data and support the assessment of deviations. Provide support of timely execution of the process monitoring quarterly reports. + As a document owner, initiate, revise, and approve manufacturing procedures to ensure all procedures reflect current operations. Assess process performance by; observation of floor operations, review of performance data and provide troubleshooting support. Evaluate, plan, and implement solutions for process improvement opportunities. + Assist in generation of training materials and / or in providing training on scientific or technical aspects of the process. Execute risk evaluations for new processes or changes to existing processes and issue the summary reports of these evaluations. + Participate in technology transfer / NPI process to assess requirements for documentation, materials, training, and equipment modifications. Assess, prioritize, justify, and provide implementation and project management support for process or equipment modification projects. + Ensure that all Non-conformance are triage within the established goal. Assist with investigations, corrective actions and NC/CAPA closure within established goal. Monitor and communicate incidents trends. Review equipment/system Root Cause Analysis investigations and support trend evaluations. **Basic Qualifications:** + Doctorate degree + Masters degree and 2 years of experience + Bachelors degree and 4 years of experience + Associates degree and 8 years of experience + High school diploma / GED and 10 years of experience **Must Have Skill Sets:** + Quality & Compliance Knowledge (GMP, CAPA, documentation control, risk assessments) + Technical Expertise in Manufacturing Processes + Process Improvement & Continuous Improvement **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** . "US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran"

Tosoh SMD, Inc. is a global leader in semiconductor materials. Our superior products help customers introduce cutting edge technologies that make our lives easier and move us into the future. Our state-of-the-art manufacturing facility and materials laboratory located in Grove City, OH manages the entire life cycle of our products, including supply chain development, research and development, manufacturing, testing and distribution. Our innovative and devoted team of scientists, engineers, metallurgical experts, manufacturers and managers continuously collaborate and strategize to improve and create new materials for a wide range of customers' semiconductor needs. These products are used in many final applications like automotive, mobile devices, computers, artificial intelligence, 5G networks and industrial automation. As one of over 100 Tosoh Corporation's family of companies our motto is "We Make the Material That Makes Your Devices Work". The Manufacturing Supervisor works to develop and optimize manufacturing team performance within their defined department. Provides direction to manufacturing to lead operators and employees, with or in place of the Manufacturing Manager. Responsible for ensuring safe and correct set up of equipment, managing the workflow for production needs, and ensuring efficiency during the daily manufacturing operations. Reporting Relationships The Manufacturing Supervisor reports to the Manufacturing Manager. Major Duties and Responsibilities Understand and adhere to all safety requirements and coach those behaviors to the Tosoh team. Communicate identified risks to all levels of leadership and provide proposals for resolution. Required to be an emergency response and safety team member. Managing the use of equipment and employee operations based off scheduling needs and customer demand. Accountable for performance and standardization of 5S (Sort, Set in Order, Shine, Standardize, and Sustain) in defined department to maintain a safe, organized, and efficient work environment for you and your team members. Assist with the development of process documentation. Communicate and identify differences between actual process and documentation. Communicate and document non-conformances for employee and department development. Drive resolution of non-conformances through review of non-conforming orders in the department. Drive team achievement of defined output standards as measured by daily operational efficiency for the department. Assist in direct production needs as required to meet business objectives. Ensure adherence to production schedule through monitoring dispatch information and resolving gaps that would prevent adherence to schedule. Drives root cause analysis of performance variance to key metrics amongst team members and drives improvement actions. Responsible for employee career progression through development plans and performance reviews. Identifies gaps in manufacturing operations and pursues closure through reallocation of resources, cross-training, interviewing, hiring, and successfully on-boarding new-hires. Provides counseling/coaching of employees and maintains proper documentation of each session. Maintain regular and reliable attendance. Leads development of team culture through alignment with company values and code of conduct. Maintain a positive attitude, display enthusiasm for assigned tasks, and communicate effectively and professionally with team members. Demonstrate flexibility of schedule when pursuing or performing training opportunities to achieve personal and company objectives. Education High school diploma or GED. Skills and Qualifications Previous experience in manufacturing leadership or job-related leadership is required. Effective organizational, interpersonal, and communicational skills Effective utilization of basic computer applications, including office and production systems Physical Requirements Ability to lift and move up to 40 pounds on a regular and routine basis. Frequent bending and twisting required. Must be able to stand and walk for extended periods of time. Must be able to wear required personal protective equipment (PPE) as defined by process. Tosoh SMD, Inc. is an Equal Opportunity Employer M/F/Disabled/Veterans

Job purpose This position is responsible for leading the day-to-day operations of the Customer Service and Costing Team, including pricing implementation, competitive analysis, and initiatives to strengthen overall service margins. The role also provides effective customer service to both internal and external customers by leveraging a strong working knowledge of company services, processes, and cross-functional team capabilities. Duties and responsibilities Partners with customers to develop quotes and to deliver maximized customer satisfaction while driving revenue and margin in a timely fashion Review customer RFQs, specifications, drawings, and technical requirements to develop detailed cost estimates Prepare accurate material, labor, overhead, and outside processing cost calculations Develop and maintain bills of materials (BOMs) and routing estimates Collaborate with Engineering and Manufacturing to validate processes, cycle times, and feasibility Source and evaluate vendor and subcontractor quotes as needed Analyze historical cost data and production performance to improve estimate accuracy Identify cost-saving opportunities and process improvements during the estimating phase Support Sales with pricing strategies, margin analysis, and proposal preparation Maintain estimating documentation, pricing models, and cost databases Assist with post-job cost reviews to compare estimated vs. actual costs Daily Oversight of Front-End Team Qualifications Associate or bachelor's degree in manufacturing, Engineering, Business, or a related field (or equivalent experience) 3+ years of experience in manufacturing estimating, customer service, or similar roles Hands-on experience with ERP systems (required) *Epicor Preferred Strong understanding of manufacturing processes (fabrication, machining, assembly, or similar) Experience creating and managing BOMs and routings Ability to read and interpret engineering drawings and specifications Proficiency in Microsoft Excel and ERP-based reporting Strong communication, organizational, interpersonal, and multitasking skills High attention to detail with the ability to work in a fast-paced environment Preferred Qualifications Experience in engineered-to-order (ETO) or make-to-order (MTO) manufacturing Prior customer-facing experience in a manufacturing or industrial environment Familiarity with cost rollups, margin analysis, and post-job cost reviews Working conditions Moderate noise (i.e. business office with computers, phone, and printers, light traffic). Ability to work in an open office environment Ability to sit at a computer terminal for an extended period. Physical requirements While performing the duties of this job, the employee is regularly required to stand and/or sit at a desk Specific vision abilities required by this job include close vision requirements due to computer work Light to moderate lifting is required Regular, predictable attendance is required; including quarter-driven hours as business demands dictate. Direct reports Front-End Team

Location: Groveport, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Manufacturing Technician for our client. This position is responsibilities include using precision measuring instruments, performing equipment testing, interpreting mechanical drawings, conducting quality inspections, preparing products for shipment, and maintaining a clean and organized work area.What's a Typical Day Like? Work with a team to assemble, troubleshoot, and repair company equipment Use precision measuring instruments and gauges Perform equipment testing Interpret mechanical drawings Conduct quality inspections on products and parts Prepare finished products for shipment Maintain a clean and orderly work area What Are the Requirements of the Job? Experienced in manufacturing, assembly, or other related fields for 2-4 years Experienced with 5T-15T overhead cranes Familiar with assembly tools and metal shop equipment Experience with basic hand tools Mathematically and mechanically inclined. Able to handle physical workload Able to pass a drug test and background check Able to work with minimum supervision in a multi-task in a fast-paced environment Ability to work in fast-paced environment. Ability to move or lift up to 50+ lbs. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Ability to utilize hand/eye coordination. Capability to stand for prolonged periods of time Communication skills. How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

M.H. Eby, Inc.- a leading manufacturer of aluminum trailers and truck bodies is looking for experienced laborers to work in our fast-growing company. Candidates must be trainable and willing to learn! TIG Welders Fabricators Assemblers First and Second shift positions available! At M.H. EBY, Inc., we foster a culture that rewards initiative, hard work, and teamwork. Join our dynamic team and grow your career with us. Benefits: * Paid Time Off after 90 days * Paid Holidays * 401K & Profit-Sharing Plan * Medical and Dental insurance * FSA * Life Insurance * Short Term Disability Insurance General tasks may include welding and/or fabricating aluminum, operating CNC machinery, operating forklifts and overhead cranes, operating various hand tools, and much more. On-the-job experience is not required, but good attitude, good work ethic, and a team mentality is a must. MH Eby, Inc is a third-generation family-owned company established in 1938. Headquartered in Lancaster County, Pennsylvania with 7 additional locations spanning from Ohio to Montana, Eby designs and builds aluminum transportation equipment including Livestock, Grain and Equipment trailers, and a full line of truck bodies. All locations offer comprehensive service and parts to support our customers. All applicants will be considered. Potential hires must pass a physical and drug screen before starting employment. Experience is preferred but we will train the right candidate. Starting wage based upon experience.

Job Description Join the dynamic team at Superior Plastics as a Full Time 1st or 3rd Shift Manufacturing Supervisor in Plain City, Ohio! This exciting opportunity places you at the forefront of our production processes, where your leadership will directly impact our efficiency and product quality. Embrace the challenge of supervising a dedicated team in a fast-paced manufacturing environment, enhancing your skills in management and technical operations. With a competitive pay range of $20 to $25 per hour, depending on experience, your expertise will be recognized and rewarded. You'll thrive in an onsite role where collaboration and innovation are valued, making every shift an opportunity for professional growth and contribution. You will receive great benefits such as Medical, Dental, Vision, 401(k), Company Paid Life Insurance, Health Savings Account, Company Paid Disability, Paid Time Off, Paid Holidays, Snack/Drink Room, and we are 100% Employee Owned Business. Take the next step in your career and apply today to be a vital part of a company committed to excellence in the manufacturing industry! What does a Manufacturing Supervisor do? As a Manufacturing Supervisor at Superior Plastics, your daily responsibilities will center around ensuring smooth operations on the production floor. You will oversee a team of operators, providing guidance and support to optimize productivity and maintain high safety standards. Your role will involve monitoring production schedules, quality control, and troubleshooting any issues that arise during the shift. You will be responsible for conducting regular team meetings to foster communication, as well as implementing training programs for new staff to ensure they are well-prepared. Additionally, you'll collaborate with other departments to streamline processes, maintain equipment, and uphold compliance with industry regulations. Strong problem-solving skills and effective communication will be vital as you work to achieve daily production goals while motivating your team to maintain a positive work environment. Are you the Manufacturing Supervisor we're looking for? To excel as a Manufacturing Supervisor at Superior Plastics, several key skills are essential. First and foremost, strong leadership abilities are crucial to effectively guide and motivate your team while fostering a productive work environment. Excellent communication skills will allow you to convey expectations clearly and facilitate collaboration among team members. Problem-solving skills are vital for quickly addressing production challenges and ensuring efficient operations. A keen eye for detail will help you maintain high standards of quality control and safety compliance. Additionally, time management skills are important for balancing multiple tasks and meeting production deadlines. You should also possess a solid understanding of manufacturing processes and best practices, enabling you to make informed decisions. Finally, adaptability is essential, as you'll need to navigate a dynamic environment and respond to changing production demands proactively. Get started with our team! If you think this job is a fit for what you are looking for, great! We're excited to meet you!

SummaryThe Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies.Job Description Roles and Responsibilities Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. Develop strong working relationships with casting supplier technical teams. Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. Act as a change agent to advance world-class performance and standard work across the supply base. Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. Review and approve significant/special processes; ensure adherence to standards and qualification requirements. Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. Ability to travel to supplier sites 30%-50% Minimum Required Qualifications Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field Desired Characteristics and Experience Additive manufacturing experience. Metal Injection Molding (MIM) experience. Proficiency with Siemens NX or comparable CAD. Sand Castings Experience. Titanium Experience. Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. Strong problem solving and project management skills. New Product Introduction experience. Experience maturing technologies and processes. Excellent communication and stakeholder management; ability to influence without authority Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( Safety, Quality, Delivery and Cost in that order) . Pay and Benefits: The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No #LI-Remote - This is a remote position

At Kelly Services, we work with the best. Our clients include 99 of the Fortune 100 TM companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. Job Description Kelly Services has been providing outstanding employment opportunities to the most talented individuals in the marketplace. We are proud to offer a temporary opportunity to work as a Manufacturing Technician for one of our top Life Science clients located in West Chester, OH. By working with Kelly in this role, you would be eligible for: - A competitive hourly pay rate with weekly payment via direct deposit - Online continuing education via the Kelly Learning Center - Several employee discounts - And more! *This is a 6+ month temporary position at 40 hours per week* Qualifications . Experience working with machines and performing repairs 2. High school diploma or equivalent Additional Information All your information is kept confidential as per EEO standards. Why is this a great opportunity? The answer is simple…working at our client is more than a job; it's a career. The opportunities are diverse whether you are right at the start of your career or whether you are looking for new challenges this is the job for you, so be quick and apply now!

Job Description Majestic Plastics is a Custom Plastic Injection Molder and have strived for the upmost quality of our product for the last 25 years. We are 100% Employee-Owned! Ready to dive into the thrilling world of manufacturing? Join our team at Majestic Plastics in Bellefontaine, Ohio, where you'll become an essential part of our Injection Molding operations! As a Manufacturing Technician, you'll work hands-on with advanced machines and presses, helping to shape plastic components for the automotive industry. This exciting onsite role offers a competitive pay range of $19.00 - $22.00 per hour. Picture yourself problem-solving daily, pushing the boundaries of innovation, and collaborating with energetic molders in a factory environment that values safety and excellence. You will have benefits such as Snack/Drink Room, Medical, Dental, Vision, Company paid Life Insurance, Paid Time Off, 401k Plan with Company Match, Monthly Perfect Attendance Bonus, ESOP - Employee Stock Ownership Plan, Holiday Pay, and Company paid Disability. This position invites you to explore the art of automation while mastering the maintenance of our cutting-edge equipment. Don't miss your chance to be part of something majestic-apply today! Are you excited about this Manufacturing Technician job? As a Manufacturing Technician at Majestic Plastics in Bellefontaine, Ohio, your role will involve crucial mold setup and startups, ensuring our injection molding machines and equipment are primed for success. Get ready to flex your problem-solving muscles as you tackle maintenance and repairs on our advanced machines while supporting automation and ultrasonic welding setups. Your expertise will directly contribute to our production activities, fostering a fun and energetic factory environment where every day brings fresh challenges and opportunities for innovation. Join us, and let's make magic happen together in the world of injection molding! Knowledge and skills required for the position are: Experience with injection molding would be nice but always willing to train the right individual Maintenance and repair abilities Good attendance Attention to detail Make your move We're looking for talented individuals like you to join our team and help us achieve our goals. If you're passionate, driven, and committed to making a difference, we want to hear from you! Don't wait - apply now and take the first step towards a fulfilling career with endless possibilities. Let's work together to make great things happen!