Explore jobs
Find specific jobs
Explore careers
Explore professions
Best companies
Explore companies
Best manufacturing project engineer certifications
Manufacturing project engineer certifications allow job seekers to demonstrate their competency as an manufacturing project engineer to employers. However, not all manufacturing project engineer certifications provide the same value for job seekers.
The best certifications for a manufacturing project engineer are Six Sigma Green Belt, Engineer In Training Certification (EIT), and Microsoft Dynamics AX 2012 Lean Manufacturing.
Below is a list of the best manufacturing project engineer certifications. Obtaining an manufacturing project engineer certification will give you a leg up when you apply for jobs and increase your potential salary.
7 best certifications for manufacturing project engineers
| Rank | Manufacturing project engineer certification | Organization |
|---|---|---|
| 1 | Six Sigma Green Belt | IASSC |
| 2 | Engineer In Training Certification (EIT) | NCEES |
| 3 | Microsoft Dynamics AX 2012 Lean Manufacturing | MS |
| 4 | Certified Systems Engineering Professional (CSEP) | INCOSE |
| 5 | Certified Planning Engineer (CPE) | AAPM |
| 6 | Certified Quality Auditor (CQA) | ASQ |
| 7 | Certified Manufacturing Engineer (CMfgE) | SME |
7 best manufacturing project engineer certifications
1. Six Sigma Green Belt
The IASSC Certified Lean Six Sigma Green Belt (ICGB) is a professional who is well versed in the Lean Six Sigma Methodology who both leads or supports improvement projects, typically as a part-time role. A Lean Six Sigma Green Belt possesses a thorough understanding of all aspects within the phases of D-M-A-I-C. They understand how to perform and interpret Six Sigma tools and how to use standard principles of Lean.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
2. Engineer In Training Certification (EIT)
The EIT Certification, which is formally known as the Engineer In Training Certification, is simply a document, a number, granted by the individual’s state engineering board after they pass the Engineer In Training Exam. The Engineer in Training Exam (EIT Exam) is the first of two exams you will take as you move towards obtaining your Professional Engineering License (PE). This exam, which you may also hear referred to as the Fundamentals of Engineering exam (FE Exam), is developed and administered in all states (and a number of locations outside the US) by the National Council of Examiners for Engineering and Surveying (NCEES). The FE Exam is offered to eligible students year-round in four different testing windows.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? No
- Renewal required? No
3. Microsoft Dynamics AX 2012 Lean Manufacturing
This exam is designed for partners, consultants, pre-sales consultants, and professionals who plan to use lean manufacturing functions in Microsoft Dynamics AX 2012. Candidates should have a general working knowledge of Microsoft Dynamics AX 2012, including production and trade and logistics concepts, along with a moderate understanding of basic lean manufacturing concepts and production processes.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
4. Certified Systems Engineering Professional (CSEP)
Targeted towards systems engineers with five or more years of systems engineering work experience
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 5 year(s)
5. Certified Planning Engineer (CPE)
Our AAPM Global Board of Standards issues the CPE Certified Planning Engineer - Board Certification to qualified applicants who have met our commission requirements of: Education, Training, Experience, Industry Knowledge, Ethics, and Continuing Education.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 2 year(s)
6. Certified Quality Auditor (CQA)
The Certified Quality Auditor is a professional who understands the standards and principles of auditing and the auditing techniques of examining, questioning, evaluating and reporting to determine a quality system's adequacy and deficiencies. The Certified Quality Auditor analyzes all elements of a quality system and judges its degree of adherence to the criteria of industrial management and quality evaluation and control systems.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
7. Certified Manufacturing Engineer (CMfgE)
Professionals who earn a CMfgE demonstrate a comprehensive knowledge of manufacturing processes and practices. Pursuing a CMfgE certification requires a minimum of 8 years of combined manufacturing-related education and/or work experience, including a minimum of 4 years of work experience. A CMfgT with a minimum of 7 years manufacturing-related work experience and/or education also qualifies.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
What is the best certification for a manufacturing project engineer?
The best manufacturing project engineer certification is Six Sigma Green Belt. The Six Sigma Green Belt is awarded by the International Association of Six Sigma Certification. The advanced certification is for more experienced employees as it often requires some work experience to acquire.
Here's a bit more background on how to obtain this manufacturing project engineer certification:
- To become a certified Six Sigma Green Belt, you need to pass the exam.
- This certificate requires more than two years of work experience.
- Renew certification every year.
What are some of the most in-demand certifications for manufacturing project engineers?
The most in-demand manufacturing project engineer certification is Six Sigma Green Belt based on all active job postings. Having this manufacturing project engineer certification will give you access to more manufacturing project engineer jobs with higher salaries.
What certifications can impact a manufacturing project engineer career and salary?
The Six Sigma Green Belt certification will help you to secure a senior manufacturing engineer position, which will increase your pay and career trajectory. A senior manufacturing engineer's average salary is $83,590 whereas manufacturing project engineers make an average salary of $82,447.
The most common combination of manufacturing project engineer certifications include: Six Sigma Green Belt, Engineer In Training Certification (EIT), and Microsoft Dynamics AX 2012 Lean Manufacturing.
Online courses for manufacturing project engineers to earn certifications
1. Engineering Project Management
Master strategies and tools to more effectively and successfully manage projects.\n\nToday’s professional environment is highly competitive, continuously changing, and difficult to manage. Employees rarely reach positions of leadership without managing one or more projects or a project segment early in their career.\n\nBrought to you by the Rice Center of Engineering Leadership and team behind the engineering management master's program, the goal of this Specialization is to give you the tools...
2. Introduction to Mechanical Engineering Design and Manufacturing with Fusion 360
Design for manufacturing is the process of designing parts, components, or products with the understanding surrounding design requirements for a specific manufacturing method. This course explores the design for manufacture workflow and shows how to validate models and create the G code, the programming language needed to instruct the CNC machine on how to move. We practice the basics of part and assembly design, and tools such as animation, rendering, and simulations using Autodesk Fusion 360...
3. Manufacturing Guide for Mechanical Product Development
Learn how everyday physical products are manufactured with no prior experience in engineering...
4. Product Development & Systems Engineering
The complete Product Development & Systems Engineering course! Earn 25 contact hours AND prepare to take the INCOSE Exam...
5. Engineering and Product Design Processes
Welcome to “Engineering and Product Design Processes!” In this short course, you will learn how engineering design processes and product design processes are carried out. After the course, you will be familiar with the steps in both design processes. You will also be familiar with the main goal of each design process, as well as their similarities and differences...
6. Managing Major Engineering Projects
Accelerate your career by improving your project management skills. This Specialization delivers a rigorous exploration of the best practices for planning and delivering these major engineering projects. You’ll learn about the measures of success, how to resolve challenges of governance and typical financing approaches of these projects.\n\nIf you are an engineer or a project manager and you aspire to get involved with major engineering projects, or you are already working on one, then this...
7. Manufacturing process selection and Design for manufacturing
Learn about the basics of selecting process for a mechanical design and the principles of design for Manufacturing...
8. Mechanical design and Product development process
Learn the basic ideas and concepts behind developing mechanical products related to mechanical engineering...
9. Introduction Agile & Scrum for Product Owners
[UNOFFICIAL] Learn about agility & Scrum. Prepare for your Project Manager or Product Owner certification in 2023!...
10. The Production Part Approval Process (PPAP)
The 18-step process for ensuring new parts are consistently manufactured and meet their customers' quality expectations...
11. Agile Crash Course: Agile Project Management; Agile Delivery
Agile Project Management Basics (Scrum) & Agile Project Management Essentials (Scrum). Plus Agile Certification (Scrum)...
12. Kaizen Practitioner Masterclass for Quality Management.
Structured Approach to identify and Eliminate waste in Business for Continuous Improvement & Quality Management...
13. Lean Manufacturing A-Z: Lean Operations Management
Lean Business Operations Management, Lean Process and Systems Improvement in Production and Industry. MBA style course...
14. Process/Chemical Engineering - BOOTCAMP 2021
The only course with over 10 hours practical knowledge about main process equipment Design, Control and Safety...
15. Project Management - Complete Guide For A+ Project Managers
Complete guide to project management - stakeholders, planning, cost, quality, risks, feasibility, methods & resourcing...
16. Project Management for Beginners: Fundamentals Crash Course
Project Management Training for new Project Managers - Introduction to Project Management Certification - PMP - Agile...
17. Product Design Management for Agile Practitioners
Application of product design management principles, concepts, tools and techniques in agile product management...
18. IT Project Budget & Cost Management
Project Management tips to manage a million dollar IT Project budget from start to finish...
19. Project Management: Becoming a Successful Project manager
Project Management...
20. Project Management Essentials
A crash course in the essentials of project management for new project managers...