Manufacturing technician jobs in Daly City, CA

Title: Manufacturing Specialist Pay: $25.00-$31.00/hour Duration: 6-Month Contract Schedule: 1st Shift (8-hour days; flexible start between 6:00 AM - 8:00 AM) Job Description Position Summary: This role provides technical and process support to the manufacturing team to ensure production goals are met while maintaining quality, efficiency, and compliance with established quality systems. Key Responsibilities Analyze production data to identify trends and recommend actions that improve efficiency, product quality, and cost. Identify process gaps and collaborate with engineering teams to drive improvements. Support validation activities as a subject matter expert, including reviewing validation plans, executing protocols, and ensuring validated state is maintained. Serve as an SME for MES and eDHR systems; collaborate with cross-functional teams during development and change management. Create, update, and support Quality Documents such as SOPs, work instructions, pFMEAs, test methods, batch record templates, and validation reports. Participate in continuous improvement initiatives using Lean and Operational Excellence methodologies. Contribute to internal audit activities and assist with corrective actions and audit responses. Test next-generation instrumentation using approved procedures. Troubleshoot product non-conformances and work closely with Manufacturing, Quality, and Life Cycle Management to resolve issues. Maintain reports tracking instrument failures and defects. Perform other duties as assigned. Required Education High School Diploma or GED. Some college-level STEM coursework or related technical training preferred. Preferred Background & Skills Bachelor's degree in Engineering, Chemistry, Biology, Physics, or related field preferred. No prior technical experience required; detailed instructions will be provided. Strong organizational skills and attention to detail. Ability to work both independently and collaboratively in a team environment. Strong communication and troubleshooting skills. Proficient with Microsoft Office (Excel, Word, PowerPoint). Experience with SOPs, DHRs, ECOs, GLP, GMP, and SAP is a plus. Hands-on experience with diagnostic or sequencing instrumentation is highly desirable.

Manufacturing Technician - Fremont, CA (On‑Site) Pay: $47.00/hour. Schedule: Full-time, Monday-Friday, 8:00 AM-4:30 PM Work Environment: In-person. Some travel to Hayward as needed An on-demand autonomous ride‑hailing company is seeking a Manufacturing Technician to support the assembly and testing of next‑generation autonomous vehicles. This team is transitioning from R&D to commercial launch, and your hands-on expertise will directly influence build quality, system reliability, and production readiness. You'll work on vehicle assembly lines, support sub‑assemblies, run software bring‑up scripts, perform light diagnostics, and collaborate closely with engineering teams. Your feedback will help refine processes, improve safety, and accelerate the company's path to mass production. What You'll Do Work closely with leads and technicians on vehicle assembly line builds Perform sub‑assembly of smaller components to support production Support bring‑up activities, including running scripts and assisting with software testing Conduct light diagnosis and troubleshooting of vehicle issues Execute daily tasks to ensure on‑time project completion Provide feedback to engineering and development teams Collaborate with cross‑functional teams as needed Follow all Environmental Health and Safety (EHS) guidelines Identify opportunities to improve quality, efficiency, and safety Ideal Candidate Profile The strongest candidates bring hands‑on mechanical skills, a positive attitude, and the ability to stay productive even during downtime. Positive attitude, quick learner, strong team player Comfortable with cutting, drilling, teardown, and rebuild work on Toyota Highlanders Experience with sub‑assembly to feed the production line Able to run basic software scripts (copy/paste, execute) Bachelor's degree + 4-6 years experience preferred; 2-4 years considered with strong soft skills Electrical work is minimal (10-15%) and can be learned CAN/LIN familiarity is a plus Automotive line experience translates well Semiconductor line experience is not a fit Required Skills & Qualifications Bachelor's degree with 4-6 years of technician or manufacturing experience, or equivalent industry experience Proficiency with basic hand and power tools Strong analytical and problem‑solving skills Understanding of basic electrical theory Ability to read electrical schematics and harness drawings Familiarity with CAN/LIN systems is a plus Automotive/OEM experience preferred Associate Degree or Certificate in Automotive Technology is a plus Why This Role Matters As a Manufacturing Technician, you'll help build and test autonomous vehicles equipped with Gen2 technology. Your work will directly influence: Build quality System reliability Safety improvements Speed to commercial launch Your hands-on insights will help refine key systems and accelerate the company's transition from prototype to production.

Job Title: Opto-Mechanical Assembly Engineer / Technician (1st and 2nd Shift) Work Schedule: On-site Rate: $36, Based on experience. Shift: Monday - Saturday 06 AM - 03:30 PM 03 / 04 PM or 12:30 - 02:30 AM (OT required) OT required on Saturday's Responsibilities: • Maintain tool schedules, complete alignment processes (milestones) per defined test times - work assignments that are moderately complex in nature where judgment is required in resolving problems • Support tool progression priorities -tests and troubleshoots assemblies and/or final systems • As required, prepares technical reports summarizing findings and recommending solutions to technical problems Additional Responsibilities: • Maintain test tooling, sending/receiving tooling to complete daily work activities (3rd party calibration) Top 3 Skills Needed: 1. Mechanical experience - hands-on mechanical work is essential. 2. Optical alignment experience - highly preferred. 3. Commitment for long-term - ability to work extended hours and sustain workload. Work Schedule: • 6 days/week (Monday-Saturday) • 10+ hours/day • Long-term engagement expected. Qualifications: • Minimum High School Diploma • At least 1 year of relevant experience (mechanical/optical) • Interview process will assess knowledge and skills. Interview Process: • 3 rounds in one day (~1.5 hours total): • Mechanical test • Written test • One-on-one interview Industry Preference: • Candidates from aeronautics or medical devices are good fits. • No fiber optics experience required. Requirements: • Performs the build, calibration, testing and troubleshooting of mechanical assemblies at a system level. • Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams. c. • Tests and troubleshoots assemblies and/or final systems. • May complete rework on assemblies and/or systems as a result of testing. • Prepares technical reports summarizing findings and recommending solutions to technical problems. May assist in the selection and set-up of specialized test equipment. • Requires experience in testing digital and/or analog systems • Ability to read complicated drawings, mathematics, handbook formulas, and a variety of testing and measuring instruments • An AA degree, military technical training or their equivalent vocational training is a +. • Will accept HS diploma with equivalent experience • Lift 50 lb requirement EXPERIENCE: • Typically requires a minimum of 2 - 4 years of related experience. • Looking for a person with strong mechanical, electrical and software skills. • NOT looking for PCB experience/ board TS. • More opto assembly BIG system level. About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Manish Rajput (****************** / *************** for more details.

CLEANROOM PACKAGING OPERATOR Location: Palo Alto, CA Reports to: Operations Manager Shift: Days Compensation: $19 - $23/hr We've built our reputation as an industry leader by delivering world-class precision metal finishing solutions for over 50 years. We proudly serve a variety of industries including aerospace, defense, medical, semiconductor, and other high-tech industries that demand uncompromising quality and reliability. Our team is dedicated to craftsmanship, innovation, and exceeding customer expectations - every component, every time. Your Role: As a Cleanroom Packaging Operator, you'll be part of the final stage of production, preparing finished parts for shipment in a controlled environment. You'll handle wrapping, sealing, labeling, and boxing while maintaining the organization and cleanliness required for high-quality work. What You'll Do: Package finished metal parts in a cleanroom environment following established procedures. Wrap, seal, label, and box items with accuracy and efficiency. Maintain organization and cleanliness in the packaging area. Inspect parts for visible flaws or irregularities before packaging. Follow quality and safety standards at all times. Assist with other production tasks as needed. What You'll Bring: Basic packaging or manufacturing experience preferred. Strong attention to detail and ability to follow instructions. Self-motivated with a positive attitude and willingness to learn. Organized, reliable, and comfortable working in a fast-paced environment. Commitment to cleanliness and quality standards. Outstanding teamwork and communication. Must meet US person status due to export regulations.

As a Manufacturing Operator, you will play a critical role in the manufacturing process by assembling high-quality products in accordance with detailed specifications and standard operating procedures. You will ensure that each component is accurately integrated, contributing to the overall integrity and performance of our medical and diagnostic products. Your responsibilities will include maintaining optimal production efficiency by monitoring workflow, identifying bottlenecks, and implementing solutions to streamline operations. You will perform rigorous quality control tests, inspecting raw materials, subassemblies, and finished goods to uphold Roches commitment to excellence and compliance with regulatory standards. In addition, you will manage inventory levels to support uninterrupted production, operate tools and machinery with precision and safety, and promptly report any issues or deviations to supervisors to ensure continuous improvement and operational excellence. Job Description Duties: • Assemble products following specifications - Accurately assemble components according work instructions - Use appropriate tools and equipment to complete builds efficiently and precisely • Maintain production efficiency - Follow standardized procedures to ensure consistent output and product quality - Monitor workflow to meet daily and weekly production targets while minimizing downtime. • Perform quality control tests by inspecting raw materials, subassemblies and finished products to ensure product integrity. • Inventory management • Operate tools and machinery safely • Report issues to supervisors Who You Are • 5 years + in the manufacturing environment • Strong problem-solving skills • Excellent communication abilities • Proficiency in industry tools/software • High School Diploma / GED required • Ability to have prompt, regular and reliable work attendance required Physical Requirements: Must be able to lift 25 pounds Standing for 8 hours per day Fully On-Site role in Santa Clara, CA. Monday-Friday 7am-3:30pm Education Requirements: High School Diploma/GED Years of Experience Required: 5 years

Medical Device Manufacturing Operators Pay $25.00 - $30.00 6 month+ assignment Onsite in Campbell, CA EDUCATION/EXPERIENCE: • A minimum of 4 years related experience in the medical device industry; or equivalent combination of education and work experience. • Must be certified on all processes of work area, including certified as expert on all critical processes. • Training, skill, or experience from a trade is preferred. • Highly skilled in product manufacturing, testing, and data collection. • Proficient with GMP, GDP procedures and requirements as they relate to production lines. • Strong ability to be reliable, work independently or in team setting and take initiative. • Strong ability to coach and train others on manufacturing processes and procedures. • High skill on operating manufacturing equipment (i.e. hot boxes, adhesives, soldering, bonding, fuse joining). • Proficient with testing: tensile, simulated use testing, or tests related to assigned projects. • Expert hand dexterity and ability to work with small components. • Strong written and verbal communication skills. • Strong computer skills, including knowledge of Microsoft office products. • Strong interpersonal skills, effective interaction with Operations and other departments ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Operate with high skill, manufacturing and packaging equipment following Standard Operating Procedures (SOPs) and Good Manufacturing Practices (GMP). • Uses high level of expertise to work with in-house and contract manufacturers and ensure products are manufactured adhering to product plans, quality, and regulatory requirements. • Collaborate with manufacturing and engineering personnel to understand product requirements, identify and implement process improvements. • Perform complex troubleshooting and maintain workspace and equipment clean. • Adhere to strict safety regulations of the company; maintain a safe, clean and organized work area, and ensure that others are doing the same. • Perform manufacturing processes using Manufacturing Process Instructions (MPI's), while assisting in the development of new processes or test procedures through feedback. • Record and review accuracy of data on lot history records (LHR's) in collaboration with manufacturing, quality, and R&D. • Meet regular attendance and punctuality expectations and adhere to all company policies. • Learn and adhere to safety requirements of manufacturing processes, equipment, handling of chemicals and materials, and apply high skills during complex operations. • Accurately use computerized operating systems to run and monitor manufacturing equipment. • May oversee the set up and operation of a variety of equipment to produce materials and assemblies. • Monitor and record critical process parameters and ensure that proper documentation and GDP guidelines are followed by others. • Contribute to manufacturing team meetings to ensure communication between members. • Help build engineering prototypes and products used in preclinical/clinical evaluations. • Must be a Certified Trainer and teach/train others on manufacturing processes. • Actively promote and support the Quality Management System, Quality Objectives, and Quality Policy. • Assure that you and functional subordinates (if applicable) are trained on all applicable procedures and processes according to Good Manufacturing Practices, applicable FDA, and Regulatory requirements. Benefits (employee contribution): Health insurance Health savings account Dental insurance Vision insurance Flexible spending accounts Life insurance Retirement plan All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

• Follow and execute established reliability test procedures and perform various environmental, mechanical, and certification testing • Photographic documentation of test setup and results • Set up and run test equipment • Record, analyze, and report test results using spreadsheets, charts, and slides • Operate thermal chambers for temperature and humidity testing • Provide timely updates on testing progress • Responsible for several tests and products throughout the development life cycle • Responsible for the safe operation of test setups • Responsible for proper use of lab equipment (only ones they've been trained to use) Develop and Execute Test Plans: Design and carry out comprehensive reliability test plans (e.g., thermal cycling, vibration, shock, humidity, burn-in, life testing) for new and existing products or equipment to simulate real-world operating conditions. Failure Analysis & Root Cause Determination: Conduct detailed failure analyses (FA) and root cause analyses (RCA) for failures identified during testing or in the field, implementing effective corrective actions and permanent solutions. Reliability Modeling & Prediction: Use statistical methods and software tools (e.g., Weibull analysis, Design of Experiments (DOE), FMEA) to predict future performance, model failure rates, and assess potential risks. Collaboration: Work closely with design, manufacturing, quality assurance, and maintenance teams to provide key input on "Design for Reliability" (DFR) and "Design for Maintainability" principles. Documentation & Reporting: Compile data, generate detailed reports, and communicate test results, findings, and recommendations to cross-functional teams and management

A leading patent consulting firm in San Francisco is seeking a Patent Agent or Associate. The role requires a degree in engineering or related fields, registration to practice before the USPTO, and a law degree for attorneys. Candidates should be confident in discussing technical details and comfortable engaging with prominent tech companies. This position offers opportunities across various fields, including AI and clean energy. #J-18808-Ljbffr

We are seeking a skilled and diligent Senior Optics Assembly & Test Technician to join our client's team. The Optics Assembly and Test Technician is a specialized professional responsible for the meticulous assembly, alignment, and testing of precision optical components, cemented doublet/triplet, and opto-mechanical assemblies. The ideal candidate will possess excellent hand-eye coordination for working with small and delicate parts, such as lenses, mirrors, and windows, and have a strong background in optics and test equipment. This position is only available to US Citizens or US Permanent Residents Duties Perform precise assembly of optical and opto-mechanical components using fixtures, hand tools, and test equipment. Align and install various optical elements, such as lenses, mirrors, and windows, while monitoring optical parameters to meet specifications. Operate and maintain a variety of optical test equipment, including interferometers, profilers, and centration testing. Execute detailed test procedures to verify the performance and functionality of assembled products. Troubleshoot and repair complex opto-mechanical assemblies that fail during testing. Thoroughly clean and inspect optical components under a microscope for defects or contamination. Read and interpret detailed work instructions, engineering blueprints, and schematic diagrams. Maintain accurate records of all production, test data, and documentation. Adhere to all safety protocols and maintain a clean and organized work area, which may include a cleanroom environment. Collaborate with engineering teams to provide feedback on manufacturability and assist with the development of new processes. Requirements Education: High school diploma or GED required. An Associate's degree or certificate in a related technical field (e.g., Optics, Photonics, or Electronics) is preferred. Experience: A minimum of 5 years of hands-on experience in a manufacturing or lab environment with optical, fiber optic, or semiconductor systems. Technical Skills: Excellent manual dexterity and hand-eye coordination for working with small, delicate components. Proficiency with precision hand tools and optical metrology equipment. Basic understanding of optical principles, physics, mechanics, and electronics. Strong computer skills for operating test equipment and documentation.

Russell Sigler Inc. is a leading independent distributor in the HVAC industry, specializing in Carrier products for over 50 years. Our mission is to deliver exceptional service and products while fostering a supportive work environment for our employees. Position Summary: The Technical Engineer provides design, systems application, and proposal preparation. Works with outside sales engineers, territory managers, and customer contracting and engineering accounts. Responsible for a variety of tasks including equipment selection, job pricing, creation of bid projects, producing submittals, placing orders, and other key job responsibilities including but not limited to the following: Key Duties and Responsibilities: Provide high-level independent ownership of projects of varying size at the different stages of execution, sometimes from start to finish including design, vetting, bidding, submittals, and final release of order Read, interpret, and make pricing and technical equipment selections, and decisions based on contract documents, including but not limited to engineering specifications, engineered equipment schedules, and architectural/engineering plans Review of engineering design and contractual documents to identify areas of risk and compliance Utilize mechanical engineering to verify mechanical equipment is being applied and implemented within the intended and acceptable range of operation Estimating and proposal writing of complex commercial engineered equipment and automation projects Technical specification writing and review Design and application support of external consulting engineering firms for commercial and industrial construction projects Project site visits for engineering and application support of commercial equipment and automation. Offsite project and opportunity meetings with contractors, engineers, owners, and complementary trades Management of multiple time-sensitive deadlines simultaneously Coordinate between the contracting sales department and engineering sales department on design changes and strategy Interact and work closely on a daily basis with outside sales engineers, territory managers, engineering firms, contractors, owners, project coordinators, central bid desk, credit department, order entry department, customer assurance department, warehouse employees, and manufacturers Provide independent high-level direct support for certain contractors, engineers, and outside sales engineers Coordination and verification of multiple external vendors and internal departments to create complex single-package equipment and automation solutions Work among a team to complete a large array of projects in varying phases, delegating work among each other, and independently completing Participate in the development and maintenance of standard operating procedures Attend and participate in job meetings, sales meetings, and trainings Participate in the training of others within and outside of the department Self and group leadership of technical development training and education Critical Knowledge and Skills: Accuracy, analytical skills, and attention to detail are required Exceptional communication and customer service skills Detail oriented Multitasking and organizational skills Good judgment and planning skills Work independently with minimal supervision in a fast-paced work environment Research using systems, software and product guides, catalogs, and manufacturing literature Review, evaluate, and make suggestions and product recommendations to customers as well as provide technical support when needed Knowledge of HVAC Carrier Products is preferred Knowledge of Carrier software (Quote Builder, Sage, HVAC Partners, ECAT, vendor websites) is preferred Work in a constant state of alertness and a safe manner Education and Experience: BS in Engineering is required, a Mechanical Engineering degree is preferred Must have a minimum 3-5 years of HVAC industry and sales experience Pay Range: Starting at $70,000.00 annum. ** Russell Sigler, Inc. (Sigler) is an equal opportunity employer. All applicants will be considered for employment based on merit, qualifications, and business need **

US Tech Solutions is a global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit our website ************************ We are constantly on the lookout for professionals to fulfill the staffing needs of our clients, sets the correct expectation and thus becomes an accelerator in the mutual growth of the individual and the organization as well. Keeping the same intent in mind, we would like you to consider the job opening with US Tech Solutions that fits your expertise and skillset. Job Description Duties: Responsible for producing innovative biotherapeutic medicine by interfacing with highly automated production systems and controls in cGMP manufacturing environment, and maintain areas in high state of inspection preparedness. Operates production equipment for Cell Culture Purification that may include process monitoring, sampling, harvesting, purification, formulation and transfer. Performs media/buffer solution preparation operations. Maintains records and clean room environment to comply with regulatory requirements utilizing current Good Manufacturing Practices (cGMP) and Standard Operating Procedures (SOP). Essential Technician: Operate systems that clean and sterilize tanks and filtration systems. Prepare solutions for the production process. Review documentation and check all calculations (e.g. tickets, labels, equipment reading). Trouble shoot equipment and process problems. Comply with safety requirements, cGMP, SOP and manufacturing documentation. Use of automation to perform production operations. Provide support to Manufacturing to meet production demands. Operate automated systems for equipment operation. Assemble and prepare equipment for production. Exhibit detail oriented documentation skills Communicate effectively and ability to work in a team environment. Exhibit professional interpersonal skills. Work with coworkers and supervisor to effectively troubleshoot minor equipment and process issues. Follows established safety and environmental guidelines and procedures for all work performed. Immediately reports safety and environmental incidents including injuries, illnesses, near misses, and safety suggestions. Fosters a positive safety culture in which no one gets hurt. Job Matrix A good working knowledge of biopharm technology and processes. Trained and skilled in all operational procedures of at least one manufacturing department. Demonstrated ability to independently document and record information related to the process. Occasionally makes routine decisions based on experience. Identifies and suggests solutions to common basic problems. Recognizes non-routine problems, investigates and suggests potential solutions. Judgment is required in resolving problems and making routine recommendations. Ability to recognize deviation from accepted practices is required. Supplementary Responsibilities: Operate bioreactors, centrifuges, other harvest systems and protein purifications units. Operate and clean fixed tank and filtration systems Operate large scale column chromatography systems. Operate small-scale cell culture areas and systems by operating cleaning, set up, and maintaining 20L bioreactors; inoculating and maintaining spinner seed cultures using aseptic techniques, maintaining cell banks; and performing general seed lab operations. Perform Solution Preparation activities (media and buffer make-up) Clean, assemble, and sterilize equipment using glass washers and autoclaves. Perform automated CIP and SIP of fixed equipment. Qualifications Degree in Life Sciences or engineering and 1 year related experience Or Associate Degree and 3 year experience Or High school and 5 years' experience Biotech certificate from approved program Additional Information Sneha Shrivastava Sr Technical Recruiter 862 - 579 - 4236

Job DescriptionWho is Anatomage? Founded in 2004, Anatomage is a world-leading health care technology company. Anatomage offers 3D medical imaging software and hardware for diagnosis, treatment planning, customized surgical devices, and anatomy education in both the dental and medical industries. About the Role As a Production Technician at Anatomage, you will be working in our Table Production department with a small team of technicians that assemble and manufacture our life-sized virtual dissection tables. Anatomage is growing at a rapid pace and we need Production Technicians to help support the increasing demand for our unique products. This person will be an integral part of that team, working onsite at our warehouse location in San Jose to produce the Anatomage Table. The ideal candidate has previous computer and/or assembly experience. This person must have strong attention to detail, comfort lifting heavy products, and enjoy assembly production. This is the perfect opportunity for someone looking to witness our technological products be created from start to finish and be part of a close-knit team. This role is $24/hr. What You'll Do Assemble hardware products in our production line Employ high standards of assembly work to ensure high quality products are being produced on schedule Quality assurance of our in-house table application software Maintain organized and safe work environment Fundamental computer navigation, installation, and troubleshooting Follow proper inventory protocol with accuracy Miscellaneous duties as needed Requirements Great attention to detail Strong organizational skills Verbal and written communication skills Able to lift up to 45 lbs without assistance on a regular basis Ability to work efficiently and effectively with minimal supervision Qualities We Look For 1-3 years in computer assembly preferred Experience using small hand tools/power tools Ability to collaborate well on a team Ability to manage and prioritize multiple tasks with competing demands Minimum Education and Experience Required High School Diploma or GED equivalent 1+ year of full time work experience Physical Requirements Climbing, stooping, kneeling, crouching, standing, walking, reaching with hands and arms, grasping and feeling with fingers and palm, talking, hearing, and performing repetitive motions Ability to push, pull, lift, and/or carry up to 45 pounds without assistance Ability to utilize close visual acuity to perform visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes Benefits What We Offer Health, Dental, and Vision care for you and your family 401K savings plan with employer matching Generous PTO leave and paid holidays Fun, casual and blooming culture Team bonding activities, catered lunches, free snacks and more when we return back to our office! About Anatomage Anatomage has been financially robust and growing for 15 consecutive years. Doctors world-wide have enthusiastically responded to the company's products, making us a market leader and setting the industry standard. Currently, thousands of clinics and hospitals use Anatomage's software for patient diagnosis and treatment planning. Leading radiology equipment companies use Anatomage's software as a key component in their systems. Anatomage offers the world's first and only life-sized virtual dissection table. Students can learn anatomy and physiology using highly interactive and accurate real human-based digital data. Institutions can offer high quality education without worrying about chemicals, facility costs, and regulatory issues. Hundreds of schools have adopted the Anatomage Table as the main teaching tool for students. At Anatomage, there is an opportunity to work alongside the best in the field. With a diverse group of people from various technical, clinical, and artistic backgrounds, Anatomage provides a culture where distinguished individuals can work and collaborate in an organic manner. Our team members all bring unique strengths and talents to their group and embrace each other's diverse perspectives. Anatomage offers a distinct work experience with an exceptional opportunity to develop careers. Our philosophy is to foster a dynamic work environment, and we are proud to let our employees' knowledge and responsibilities grow with the company. In the U.S., the standard base pay range for this role is $25.00 per hour. This base pay range is for the U.S. and is not applicable to locations outside of the U.S.. Actual amounts will vary depending on experience, performance and location. In addition to a competitive base pay, employees in this role may be eligible for incentive compensation. Incentive compensation is not guaranteed. Anatomage is an Equal Employment Opportunity employer. We do not offer H1B Sponsorship at this time. Local candidates preferred. Fraud Recruitment Disclaimer It has come to our notice that fraudulent and fictitious job opportunities are being circulated on the Internet. Prospective candidates are being contacted by certain individuals, mainly through telephone calls, emails and correspondences, claiming they are representatives, subsidiaries or under contract with Anatomage, Inc., and, thus, pretending to represent Anatomage. The main purpose of these correspondences and announcements is to obtain privileged information from individuals, or to induce people to pay a fee for services related to recruitment or training or a new role. Anatomage does not: Send job offers from free email services like Gmail, Yahoo mail, Hotmail, etc.; Request payment of any kind from prospective candidates for employment or any sort of fees; Authorize anyone to either collect money or arrive at any monetary arrangement in return for a job at Anatomage; and Request or require personal documents like bank account details, tax forms or credit card information as part of the recruitment process. Legitimate emails ******************* domains are from the organization, anything outside of the stated domain is likely a scam and fraudulent email. If you have received an offer from any domain other *******************, it is likely a scam and not a legitimate offer. Please do not provide any personal information to the imposters posing as recruiters or the HR manager of Anatomage, Inc. We recommend blocking and reporting their accounts for unauthorized and fraudulent behaviors.

Figure is an AI Robotics company producing a general purpose humanoid. Our Humanoid is designed for corporate or in-home tasks targeting labor shortages and jobs that are undesirable or unsafe. We are based in San Jose, CA and require 5 days/week in-office collaboration. We are looking for a Manufacturing Repair Technician to compliment our superstar team building and improving the product of the future. Responsibilities: Repairing full robots and smaller sub-assemblies for F.03 high volume manufacturing Diagnosing electrical, mechanical, and software issues. Document issues found, steps taken, and root cause of all repairs. Validating and improving repair procedures for repeat issues and future remanufacturing of failed in field robots and sub-assemblies Supporting any immediate need to keep manufacturing moving at a high rate Requirements: 3+ years experience working with complex systems Familiarity with computer based tools such as but not limited to Google Suite, Confluence, Jira, and an interest to learn command prompt and product specific software Comfortable using a Digital Multi Meter Familiarity with torque tools and mechanical assembly Ability to follow assembly documentation Ability to build with little to no documentation with engineering support Complex system diagnostic ability Great attitude and excited to face challenges Bonus Qualifications: Manufacturing experience Computer based design experience Automotive experience Fabrication experience Soldering experience Small brushless motor experience Robotics experience

Proterra offers a dynamic and supportive workplace where our employees can thrive personally and professionally. With cutting-edge facilities and groundbreaking projects, Proterra offers unique opportunities to grow, collaborate, and lead transformative change in the electrification of heavy-duty transportation and equipment. Our commitment to innovation extends beyond our battery solutions to our people, where we create an environment where everyone feels valued, supported, and empowered to drive change for the earth. Here at Proterra we strive to foster a culture of inclusivity, valuing diverse perspectives and encouraging bold ideas, allowing our employees to bring their full selves to work. Our employees benefit from competitive total rewards packages, and opportunities to develop professionally. Position Overview This position as part of the Advanced Manufacturing Engineering (AME) organization will be responsible for supporting building battery prototypes within the Battery Engineering organization, the design and development of novel manufacturing equipment and processes to develop new battery pack designs. The Advanced Manufacturing Engineering Technician is responsible for working with engineering teams to develop and tune processes. They will also build new equipment and fixtures to specification. The role will include collaboration with both internal and external partners, taking a hands-on role ensuring that the factory can achieve the required capacity of batteries to be used by Proterra's customers. About the Role - You will: Lead technician work and operations relates to building and troubleshooting new equipment and manufacturing fixtures, setting up prototype builds, and testing new manufacturing processes. Maintain and uphold high safety standards Support the Advanced Manufacturing Engineering team in building complex mechanical and electrical assemblies Support the development of processes and equipment to allow Proterra to build prototypes and prepare battery pack design for production launch Fabricate and/or modify existing prototype components/fixtures Execute Process Studies to help engineers determine best process parameters for a given manufacturing process Work from engineering drawings and specifications to create fixtures and equipment Provide feedback and suggestions to new and/or improved equipment and processes Keep the lab space clean, organized, and equipped with supplies or machines Collaborate with sustaining engineering and maintenance teams to train them on specialty equipment Other duties as assigned by management About Our Group: The Advanced Manufacturing Engineering group seeks to develop innovative new manufacturing processes and automation tools to establish Proterra as a world leader in battery pack manufacturing. It is comprised of several different teams focused on different aspects of battery manufacturing, including process development and automated manufacturing equipment design. This role is part of the larger Battery Technology Team. The Battery Technology Team's work is guided by our team values: INNOVATION: We think of new ideas and take bold action to bring them to life. ADAPTABILITY: We react quickly to our ever-changing environment. CONTINUOUS IMPROVEMENT: We strive to make our products, services, and processes better. TEAMWORK & COLLABORATION: We work together to solve problems with camaraderie. INCLUSION: We create welcoming spaces where everyone can bring their whole selves to a diverse work community. SUSTAINABILITY: We change the world through environmentally responsible practices. KINDNESS: We are honest, caring, and respectful with each other. You will report to the Sr Manager, Advanced Manufacturing Engineering within the Battery Engineering Organization and collaborate with other team members located at our R&D headquarters in Burlingame, CA and manufacturing facilities in Greer, SC. About You: Self-starting individual with the ability to adapt interpersonal styles and techniques to influence at all levels of the organization Customer-focused attitude, with high level of professionalism and discretion. Ability to maintain strict confidentiality, establish trust and credibility, and act with complete integrity. Detail-oriented, resourceful and diligent. Flexible and open to change Strong time management and organizational skills; proactive and the ability to work with little supervision. Sound judgment and problem-solving skills; challenge assumptions not supported by engineering analysis Ability to prioritize tasks and manage multiple priorities simultaneously. Excellent written, verbal, and presentation communication skills Ability to travel as needed to Proterra and project-related partner sites Ability to travel as needed to Proterra and project-related partner sites Your Experience Includes: Associate degree in related field or at least 8+ years of relevant experience such as: Car mechanic Manufacturing line associate Troubleshooting mechanical/electrical systems Other technical troubleshooting, test or manufacturing environments Experience managing shop operations such as checking in on other technicians' progress, reporting out status updates to management, organizing materials and tools to increase productivity Demonstrated understanding of schematics, assembly drawings, and mechanical drawings Demonstrated knowledge of basic workshop etiquette, provide verbal and written communication across all teams Working knowledge of computers and Microsoft Office products Proficiency with mechanical fabrication tools such as drill presses, saws, mills, hand tools, etc Physical Demands: May work various shifts as needed; may be requested to travel to different locations. Lifting up to 25 pounds and occasionally 50 pounds. Able to walk, stand, crouch, bench, kneel, lift, carry and reach as needed in large and tight spaces. Good eye/hand coordination and ability to identify color variations, depth perceptions and close or distance visual items. Manual dexterity with occasional repetitive finger motion. Environmental Demands: Ability to work in manufacturing environment with extreme heat and cold conditions. Wear protective clothing or respiratory protective equipment. Works with irritant chemicals, gases, etc. You Might Also Have: Experience as an engineering technician or process Experience with relevant technologies such as sensors, electronics, controls, pneumatics, valves, and mechanisms Electrical and mechanical assembly experience: crimping, cabinet builds, cable routing, soldering Machining and fabrication experience with manual milling machines, welding of steel assemblies Base Location: Burlingame, CA Common Travel Locations: Greenville, SC; Vendor Sites Travel: 0-20% Compensation: $50/hr - $60/hr Applicants must be authorized to work for any employer in the U.S. There is no immigration sponsorship available for this role (ex: H1-B, OPT, CPT, TN or any other employment sponsorship). Proterra is an Equal Employment Opportunity Employer, providing equal employment opportunities to all Employees and applicants for employment without regard to race, color, creed, religion, sex, sexual orientation, gender identity, national origin, disability, age, genetic information, veteran status, pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation or any other characteristic protected by applicable federal, state, or local law or ordinance. Proterra participates in the Electronic Employment Verification Program (E-Verify). #LI-BJ1

Working in a team of media process technicians, media process technician I will manufacture dehydrated and liquid cell culture media. Formulation technician will be able to follow batch record instructions and will be expected to weigh microgram to kilograms quantities of individual raw materials, calibrate equipment, follow safety policies and procedures, operate milling equipment, perform sterile filtration and any other tasks required to complete cell culture media manufacturing. Standard product testing, such as osmolality, pH and turbidity, will also be performed in this job. This position works closely with R&D, procurement, quality, process technology, marketing as well as external and internal customers and vendors RESPONSIBILITIES: Responsible for the staging and compounding of raw materials within weight tolerances (e.G. Micrograms to kilograms), milling, blending, aseptic liquid filling, process control monitoring and documentation of such procedures for manufacturing dehydrated culture media and liquid media in accordance with production schedules following the appropriate GMP and department procedures Completes all required documentation neatly, accurately, and in accordance with GMP. Performs cleaning, inspection, calibration and assists in the maintenance of equipment. Maintains related logs and records. Performs equipment troubleshooting. Handles raw materials per GMP and Safety requirements. Uses equipment such as pipettors, balances, osmometer, turbidimeter and pH meters. Ensure that tasks are performed in a safe and responsible manner to create an injury free and incident free workplace Required to follow through on assigned responsibilities and able to function under supervision. Responsible for promoting positive team environment through good communications and team engagement. May be required to work overtime. Performs other duties as assigned in support of business goals QUALIFICATION REQUIREMENTS: Minimum of High School Diploma or equivalent. Minimum of 6 months experience in a high-paced laboratory environment or manufacturing facility. Equivalent combination of education, training, and relevant work experience maybe considered. Must be able to read, write, and follow testing and inspection procedures. Must be able to maintain neat, accurate and complete records and logs. Mechanical aptitude and ability to disassemble and reassemble various equipment. Good communication skills and ability to work both individually and as part of a team. Flexibility with departmental work schedules including overtime. Must be able to focus with continuous attention to detail. Basic experience in weighing multiple components is required. Basic proficiency with PCs (Personal Computers) and use of Windows applications such as MS Excel, MS Word and MS PPT is required. Statistical analysis using mathematical spreadsheets such as Excel or Minitab is highly desired. Must be able to lift or move approximately 40lbs Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Hyve Solutions is a leader in the data center solutions industry, designing, manufacturing, and delivering custom Server, Storage, and Networking Solutions to the world's largest Cloud, Social Media, and Enterprise companies. We pride ourselves on collaboration, innovation and thought leadership. Our team consists of diverse, forward-thinking individuals who dare to challenge the status quo, while working with many of the world's biggest customers. Hyve Solutions is a part of Synnex Corporation, a Fortune 500 company. Become part of a team that thrives on excellence in a fast changing, high-growth technology environment! Hyve Solutions is looking for a detail-oriented, hands-on, results-driven individual with proven communication skills and a strong work ethic to work in a challenging, fast-paced, energetic environment. Responsibilities: · Perform troubleshooting, repair, preventative and general maintenance on production tools and equipment · Work with vendors to troubleshoot and resolve equipment issues · Build and install tools and equipment to support factory requirements · Support Process Engineering team on programs and projects · Document equipment and tools issues, maintenance records, tooling logs and asset recording · Order parts and supplies to support production · Provide day to day tool and equipment support to production · Work with Production and Process Engineering to determine and recommend tool and equipment needs · Provide training to production and Process Engineering personnel as needed Qualifications: · Typically requires 2+ years of related experience and Associates degree or 4 years of related experience · Proficient in MS/Office (Word, Excel, etc.) · Mechanical aptitude, good with tools and working with your hands · Ability to lift 25lbs consistently · Work with precision tooling in small places · Understanding of general safety guidelines and practices · General knowledge of electro-mechanical functionality · Excellent communication skills Hourly Rate- $24.50 @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Located in the heart of Silicon Valley, Tenergy is a total power solution provider in the rechargeable battery and renewable energy industry. With over 20 years of reputation and track record, Tenergy is a recognized leading battery brand and Power solution partner in the fast growing renewable energy sector. Tenergy serves broad spectrums of customers for their applications including consumer electronics smart devices, industrial application, medical, electrical transportation and power storage. The application and business possibility with our products is endless with increasing needs for mobility and durable power. Tenergy offers competitive products in the market due to our global logistics, scale, quality, and commitment to customer satisfaction. Job Description The candidate will work in a team work environment, perform battery testing and battery charging duties, may assemble small size battery packs and related sub-assemblies when needed. Candidate must be a team player with demonstrated skills and abilities, or the fast learner in assembly manufacturing, material handling, soldering, wiring and ability to comprehend basic prints and wiring diagrams. The candidate may perform a variety of tasks in accordance with their training, experience, and skill as assigned by their Lead or Supervisor including: Assemble small size battery packs and related sub-assemblies according to specifications and drawings. Spot soldering and welding for electrical board (PCB). QC Testing and RMA analysis. Perform battery testing according to the defined procedures. Perform battery charging according to defined operating procedures. Perform proper data recording. Report issues and troubleshooting issues identified during the testing. May assist with new battery pack design. May assist with existing battery pack design improvement. Qualifications College degree in engineering Attention to details and responsible work attitude Excellent hand-eye coordination, hands-on, manual dexterity Ability to read/listen carefully to follow instructions and procedures Team player with good communication, interpersonal skills Ability to use common sense to solve practical problems. Electrical-related knowledge and training are plus. Experience in electrical assembly and soldering is a plus. Additional Information Salary DOE $20-$23/hr. Eligible for Medical/Dental/Vision Insurance and 401K with company match, paid holidays. Work schedule is Monday- Friday 8:30am-5:00pm.

Job Description TITLE: Manufacturing Engineering Technician COMPANY SUMMARY: Imagine a world where you could bring the precision and control of surgery to catheter-based therapies. For decades, endovascular procedures have been constrained by the technological limitations of catheters that lose stability and control within the anatomy. We have created a new class of therapies to overcome these constraints by using Endoportal Control to mimic the precision and control of direct surgical access, while maintaining the minimally invasive profile of an endovascular intervention. Our vision is big, spanning the breadth of cardiovascular disease where we see compelling opportunities to reimagine therapies for millions of patients. Jupiter Endovascular is a medical technology startup located in the San Francisco Bay Area, led by a team of successful medical device entrepreneurs. We have big ambitions, with a culture built on innovation, teamwork, and speed. We have raised capital from a diversified investor base, including venture capital, private equity, and corporate strategic investors. POSITION SUMMARY: As a Manufacturing Engineering Technician, you'll be a pivotal member of the manufacturing team, supporting production of innovative medical devices for the treatment of cardiovascular disease. Reporting to the Manufacturing Engineering Manager, the Manufacturing Engineering Technician plays a critical role in maximizing production uptime by maintaining, troubleshooting and monitoring production processes, equipment, fixtures, and tooling used in the manufacturing and assembly of finished medical devices. The role will be responsible for all site equipment used in production and new product development, including laboratory equipment. This role partners closely with manufacturing engineers, quality, operations, and production personnel to ensure production safety, quality, reliability, and efficiency goals are met. The role will also support continuous process improvement, process development, process validation, process transfer and other new product introduction activities. We're seeking a passionate, high-energy professional who thrives in a medical device startup environment and can deliver on the responsibilities below. This is an in-office role. ROLES AND RESPONSIBILITIES Provide ongoing technical support for production equipment and manufacturing assembly processes. Maintain performance of production equipment, fixtures and tooling. Troubleshoot equipment and process issues to minimize production downtime. (mechanical, electrical, HMI/GUI). Perform preventive maintenance, calibration, and repairs. Create and maintain accurate equipment logs and records in compliance with QMS. Set-up and test production equipment, fixtures and tooling. Maintain accurate process and inspection documentation (MPI, QIP). Train production manufacturing assemblers on manufacturing process instructions, equipment set up, testing and regular cleaning and maintenance. Create spare parts list, maintain spare parts inventory to ensure availability and minimize downtime. Perform installation and installation qualification (IQ) for equipment spares. Remediate and maintain production equipment documentation in compliance with equipment SOPs. Identify product quality process risks and collaborate with engineers to implement mitigations. Identify and recommend process and operational efficiency improvements (throughput, yield, cycle time, etc.). Collaborate with engineers to implement improvements. Support production data collection (SPC) and data monitoring. Support implementation of lean six sigma manufacturing initiatives (e.g. - 6S, visual management). Troubleshoot and maintain performance and calibration of laboratory equipment and maintain laboratory equipment log. Assist manufacturing engineers with activities related to new product development, validation and new product introductions; to include setting up pilot lines, new equipment introduction, and executing design of experiment (DOE), process capability studies, process validation protocols (OQ, PQ), software validation, and engineering builds. Support new product introduction (NPI), process transfer and production ramp up. REQUIRED QUALIFICATIONS Required Minimum Education: High school diploma. Required Minimum Experience: 3+ years of manufacturing engineering technician or equivalent (medical device experience preferred). Experience troubleshooting, maintaining and calibrating production equipment, fixtures and tooling. Experience following Good Manufacturing Practices (GMP), Good Documentation Practices (GDP), and safety protocols (OSHA). Hands-on experience with adhesive bonding and UV curing processes. Contributed to the improvement of manufacturing processes and process documentation. Ability to effectively communicate in English (verbal and written). Proven ability to work independently with a given set of priorities. Experience using hand tools, measurement tools, and other manufacturing assembly aids. Mechanical aptitude and ability to troubleshoot electrical and mechanical equipment or fixtures. Ability to understand and adhere to standard operating procedures (SOPs) and work instructions. Ability to read & interpret manufacturing process instructions (MPI), quality inspection procedures (QIP), engineering specifications, or other engineering/manufacturing documentation. Must be able to lift objects up to 50 lbs. PREFERRED QUALIFICATIONS Experience working in a cleanroom environment. Catheter manufacturing experience (coil winding, lamination, coating). Knowledge of Quality System standards & regulations. Strong understanding of basic statistics. 3D CAD experience (On Shape or SolidWorks preferred). Fixture design, fabrication, and assembly. COMPENSATION: Our job titles may span more than one career level. The starting base pay for this role is between $35-$45 per hour. The actual base pay is dependent upon many factors, such as training, transferable skills, work experience, business needs, and location. The base pay range is subject to change and may be modified in the future. This role may also be eligible for equity, benefits, and 401(k) with matching. Jupiter Endovascular provides equal employment opportunities to all applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.