Manufacturing technician jobs in Duluth, MN

Details Department:Imaging Schedule:Full Time|Evening|8 hr Shifts Hospital:All Saints Hospital *NEW GRADS Welcome!* #NextGenHealthcare Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Perform computerized tomographic procedures for the diagnosis of disease and injury according to protocols established by radiologists. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and/or medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and report abnormal activity. Monitor protocols and recommend updates or refinements as warranted. Follow radiation safety procedures and guidelines. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist credentialed from the Wisconsin Radiography Examining Board obtained prior to hire date or job transfer date required. One or more of the following required: Nuclear Medical Tech credentialed from the Nuclear Medicine Technology Certification Board (NMTCB) obtained prior to hire date or job transfer date. NMTCB(CT) Computed Tomography Specialty Certification or ARRT(CT) Radiologic Technologist specializing in Computed Tomography required in addition to CNMT Certified Nuclear Medicine Technologist Certification. Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Nuclear Medicine or Radiation Therapy specialty also accepted. Radiologic Technologist specializing in Computed Tomography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Pay Non-Discrimination Notice Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Electromechanical Technician ***$5000 Hiring Bonus*** Charter Wire is a leading Tier 1 supplier and manufacturer of Engineered Shaped Wire, Cold Finished Bar, and Cold-Headed and Stamped Components to various industries, including Automotive, Agriculture, Construction, Consumer, Industrial, and Oil & Gas. Charter Wire is a member of the Charter Manufacturing family of companies. Why Work Here: SCHEDULE: Get a dependable 8-hour first shift, Monday-Friday, with occasional overtime. BENEFITS: Access great benefits like medical, dental, vision, 401(k) match, and paid time off. GROWTH: Expand your skills with on-the-job training, process improvement opportunities, and internal advancement-we promote from within. SAFETY: Work in an environment committed to safety and continuous improvement. STABILITY: Join an established Midwest company with four generations of family ownership. Position specifics: Location: Charter Wire - 7850 N. 81st Street, Milwaukee, WI 53222 Shift: 10:00 PM - 6:00 AM, Monday-Friday What You'll Do: As an Electromechanical Technician, you'll play a critical role in maintaining, troubleshooting, and repairing production machinery. You'll work with both mechanical and electrical systems across high-speed stamping presses, cold forming machines, and automated equipment in a dynamic production environment. Maintain and troubleshoot electromechanical equipment using hand tools, welding equipment, and measuring devices Perform preventive maintenance to reduce downtime and ensure equipment reliability Diagnose and resolve issues using technical documents such as blueprints, schematics, and manuals Collaborate with cross-functional teams to support continuous improvement Follow safety protocols and use appropriate PPE Support process improvements and participate in ongoing training What You'll Need: Technical degree in a related field, journeyman's card, or 5+ years of industrial maintenance experience Proficiency in reading complex electrical schematics and code books Broad knowledge of electrical codes, electronic controls, and electrical theory Experience with line setups, inspections, and electrical testing equipment Strong math skills (fractions, percentages) Nice to Haves: Experience with PLCs and drives (Allen Bradley, Siemens) Familiarity with AC/DC motors, HVAC, and hydraulic/pneumatic systems Experience with welding/torch equipment and precision measuring tools Excellent communication and teamwork skills Problem-solving mindset and eagerness to keep learning Physical Requirements: Frequent standing and walking Occasional sitting, reaching, forceful motion, and lifting up to 60 lbs Minimal climbing and lifting over 100 lbs Ability to meet physical demands with or without reasonable accommodation Ready to put your mechanical and electrical expertise to work? Apply today and grow your career with Charter Wire. We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

We offer: Competitive pay starting between $ 25.00 - $28.11 per hour plus a $1.50 shift differential for afternoon or midnight shift. Medical, vision, dental, and life insurance starting on your first day 401k with generous company match Up to three weeks paid vacation in your first year Up to twelve paid holidays On-site physical therapy, employee assistance program, and medical support Paid parental leave Employee stock discount Opportunities for advancement The Impact You'll Make in this Role As a Production Operator you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: Supporting production by monitoring processes, ordering inputs, loading materials, inspecting materials, and performing quality inspections to release product. Operate automated production converting, molding, assembly, and packaging equipment. Monitor process, order inputs, load materials, inspect materials, perform quality inspections to release product. Operate equipment in a safe manner. Follow plant and department safety rules and practices. Work closely with other operators and service groups to optimize the process. Monitor equipment and make the required adjustments to maintain quality and desired output. Computer use is required to run process operation. Meet performance/output goals. Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Possess a High School Diploma/GED or higher (completed prior to start). Ability to work overtime, weekends, and holidays as needed. Ability to work 8 to 12 consecutive hours per day on a weekly fixed (i.e., 7am - 3pm, 3pm - 11pm or 11pm - 7am) or rotating shift (i.e., Days/Afternoons). Ability to lift/carry heavy materials. Ability to comprehend, understand, and apply written and verbal directions from standard operating procedures, safety rules and supervisor coaching. Ability to wear personal protective equipment in accordance with safety rules. Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process Work location: New Ulm, MN Travel: Does not include travel Relocation Assistance: Is Not Authorized The starting rate of pay for this position between $25.00 - $28.11 /hour. This targeted compensation range represents a good faith estimate and can vary based on factors including, but not limited to, job-related knowledge, skills, and experience. Other benefits and incentives may apply; pay and benefits overview: . This information is being disclosed in accordance with local Pay Transparency Rules. Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws. U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum (but excluding persons in nonimmigrant status such as H-1B, L-1, F-1, etc.) or non-U.S. citizens. To comply with these laws, and in conjunction with the review of candidates for those positions within 3M that may present access to export controlled technical data, 3M must assess employees' U.S. person status, as well as citizenship(s). The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. The decision whether or not to file or pursue an export license application is at 3M Company's sole election. Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. #INDPROD All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

This position is responsible for a variety of tasks to package quality cheese that meets customer expectations and supports the achievement of the company's vision, mission and values. Essential Functions Assemble, line, fill and seal 640-pound boxes of cheese according to SOPs. Operate packaging room production equipment according to SOPs. Monitor box weight targets according to cheese types. Maintain good communications with lead and/or supervisor to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Actively participate in extraneous prevention and solids recovery. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Comply with all company safety rules to achieve no injuries and no lost-time accidents. Understand and adhere to all GMPs and food safety policies and procedures and perform all work in a manner that ensures the highest standard of food safety and quality. Perform regular CIP and general housekeeping responsibilities. Safely handle, prepare and use chemicals while wearing proper PPE. Assist in training of new or untrained packaging room employees. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for day shift are from 5:00 a.m. - 5:00 p.m. and night shift from 5:00 p.m. - 5:00 a.m. This position will work alternating weekends. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00 AM to 5:00 PM or 5:00 PM to 5:00 AM

QA Engineer - Minneapolis, MN (Hybrid, Local Candidates Only) Rate Type: W2 or IC (S-Corp or C-Corp) only Job ID# 84005 We are looking for an experienced QA Engineer to join our growing team in Minneapolis, MN. This role reports to the Director of QA Engineering and will focus on testing, building, and supporting test automation for our proprietary software solutions. You will collaborate with project teams to deliver strategic and tactical enhancements while working closely with Infrastructure, DevOps, InfoSec, and Release Management teams. Responsibilities Design, implement, and maintain Test Cases and Test Plans for proprietary software. Build and maintain Automated Test Suites using modern frameworks. Conduct functional, exploratory, user acceptance, and automated testing throughout the SDLC and release process. Promote engineering excellence by developing high-quality software testing practices. Mentor other QA engineers on User Acceptance Testing, including issue tracking and triaging bugs vs. enhancements. Contribute to development across the entire stack (backend, DB, front end, UI). Collaborate with business partners, product owners, and technology teams in a highly agile, collaborative environment. Support high-velocity delivery while maintaining quality and safety standards. Qualifications Bachelor's degree or equivalent experience in a relevant field. 5+ years of experience in software testing and test development. Strong knowledge of testing methodologies: black box, white box, functional, system, exploratory, and automated testing. Experience with Test Automation Frameworks such as Appium or Selenium. Proven track record in creating comprehensive test plans and test cases for custom software. Experience testing web applications, web APIs, and data-driven applications. Hands-on experience designing and implementing automated test suites. Familiarity with CI/CD pipelines and Agile delivery environments. Experience with cloud platforms and service-oriented architectures (SOA) is a plus. Strong SQL coding and debugging skills. Excellent communication skills and ability to quickly understand complex business problems.

Operations Technician support the Sheboygan site with daily maintenance activities and assist the Maintenance Department to keep the entire site running. Learn how a maintenance department operates in a growing industrial environment while working on tasks such as observing maintenance activities, performing time studies, digitizing tasks, improving the shop area, and tagging equipment in the field. Key Responsibilities: Use computer skills or mechanical ability to support maintenance work. Follow all safety rules and report unsafe conditions to management. Complete miscellaneous tasks as assigned and contribute to department goals. Maintain excellent attendance and follow schedule requirements. Use proper documentation practices. Accept guidance from supervisors and technicians. Communicate clearly both verbally and in writing. Suggest improvements to processes when possible. Stay self-motivated, productive, and meet assigned deadlines. Read, understand, and follow all work instructions and procedures. Use software such as CMMS, web browsers, Word, Excel, and email. Learn and redline drawings, including various types of schematics. Safely operate hand tools, power tools, and shop equipment (grinder, drill press, sandblaster, band saw, etc.) with guidance. Read gauges, understand units of measure, and use precision measuring tools. Work well with the Maintenance team and demonstrate strong teamwork skills. Required Qualifications: High school diploma or equivalent. Must be at least 18 years old. Mechanically inclined. Able to work and collaborate with Maintenance personnel. Preferred Qualifications: Prior work experience. Vocational training or shop-related training. Relevant high-school classes (e.g., shop, technical education, mechanics).

Pay Rate: Pay Rate: $19.00 an hour with $2.00 an hour additional shift differential on swing and grave shift ESSENTIAL DUTIES AND RESPONSIBILITIES Disassemble, clean and reassemble burners, broilers, equipment, hoods, vents and ovens Sanitize food contact surfaces Ensure show kitchens present a positive image to guests Clean and sanitize counter tops and front surfaces Clean and change fry-o-lators Clean walls, shelves, reach-in coolers, mats and floors using specialized equipment Ensure dish machine controls are set properly and accurate quantity of chemical is used Rinse and scrub dishes as necessary before running through machine KNOWLEDGE AND CERTIFICATION, SKILLS AND ABILITIES Preferred Knowledge and Certification: Previous janitorial or food service experience Required Skills: Accurate and detail-oriented Required Abilities: Ability to work fast and efficiently Ability to follow established dress code policies and practice good personal hygiene Ability to learn appropriate chemical usage and proper equipment usage Ability to interact with guests, coworkers and management in a professional and courteous manner Ability to operate heavy equipment such as floor buffing machines, sky ladders and hood cleaning equipment PHYSICAL DEMANDS Must be able to walk and / or stand and exert fast-paced mobility for periods of up to 8 hours Must have a good sense of balance, and be able to bend, kneel and stoop Must be able to reach and twist routinely Must be able to push, pull and grasp objects routinely Must be able to climb a ladder and work at high elevations Must have the ability to independently lift 25+ pounds routinely Must be able to perform repetitive hand and wrist motions Must have good eye hand coordination WORKING ENVIRONMENT Work is performed in the kitchen including chemicals, fumes and hot and cold temperatures and may include going onto the gaming floor, which has flashing lights, frequent loud noises and cigarette smoke Must be able to work in cramped, tight quarters Must be willing to work a flexible schedule including all shifts, weekends and holidays Must handle hazardous materials

What they will be doing/ working on: This person will be working on electro-mechanical systems, helping to design, test, troubleshoot, and assemble prototype electronic circuits and specialized test equipment. They will work with both hardware and software tools (like oscilloscopes and signal generators) to diagnose and fix issues in electrical and mechanical components. They will also: Assemble and test electronic circuits (analog, digital, and video-based). Identify and fix malfunctions in electronic systems. Perform advanced electrical diagnostics on components and subassemblies. Mentor and guide junior technicians, checking their work for quality. Find alternative components for obsolete parts. Use soldering skills to repair and modify circuits. This role is hands-on and requires strong troubleshooting, assembly, and testing skills for electronic hardware. What You'll Do Assemble and test prototype electronics and systems (analog, digital, video, logic). Diagnose, troubleshoot, and fix issues down to the component level. Use tools like oscilloscopes, signal generators, and test software to validate performance. Help build and check out custom test setups and experimental equipment. Collaborate with engineers and other techs to improve designs and solve technical problems. Mentor junior technicians and perform quality checks before final testing. What You Bring Strong hands-on skills with electrical and mechanical assembly. Experience reading schematics and circuit diagrams. Advanced troubleshooting and soldering (through-hole and surface-mount). Ability to find replacement components for outdated parts. Comfortable working with minimal instruction and taking initiative. Clear communication skills for working with cross-functional teams. Your Background 2-year degree in Electronics Technology (required) 4-year degree (preferred) 7-10 years of relevant experience

Key Accountabilities Production Duties Execute manufacturing process by operating designated production equipment. Select intermediates or raw materials, move and load it into production machines. Understand bill of materials and/or formula specifications, so the proper quantities of materials are added in the proper sequence. Manufacture product in a safe and timely manner and according to predefined process instructions to meet specific quality standards. Accurately read control instruments, prepare neat & accurate records for all operations as required. Responsible for completion of all quality test requirements to verify final product quality. Ensure efficient, uninterrupted production and identify and facilitate process improvements, monitor equipment and report production information in a complete, accurate and timely manner. Keep records for production, raw material deliveries, quality samples and equipment and process performance. Prepare product packaging for next step in production or for final shipment to customer according to department specifications. Ensure proper operation, maintenance and cleanliness of various laboratory instruments. Work in accordance with all relevant requirements and internal safety guidelines. Perform other duties as assigned. Quality, Safety, Health and Environment Responsible for housekeeping in the plant and maintaining a clean, safe and clutter free work environment. Know the significant quality, safety & health, and environmental (QSHE) aspects/ impacts associated with work, including relevant legal/ other requirements and emergency preparedness and response. Understand and use the Corporate Sustainability Policy and the Integrated Management System (IMS) as guidance to continuously improve the QSHE aspects of job. Solid line(s) to Production Supervisor Dotted line(s) to None Number of direct reports n/a Number of total reports n/a Number of dotted line(s) reports n/a Performance Measures Productivity, QSHE rules, no quality claim. Other requirements Good command of both oral and written local language is required. Internal contacts Warehouse and Distribution team Production team External contacts Education High school diploma or equivalent education required Experience 5 years of industrial / manufacturing experience in a chemical or related field. Experience in a maintenance role for a manufacturing or related operation. Knowledge and skills Computer skills and laboratory experience are preferred.Basic chemistry knowledge preferred.Ability to communicate efficiently verbally and in writing with coworkers, supervisors and customers.Ability to work rotating shifts, overtime, and weekends, including operating facility alone on nights and weekends.Ability to work inside and occasionally outside exposed to heat, cold, dirt, and noise.

Production Technician -Immediate opening, starting at $24/hr.....Start earning PTO immediately Schedule is a rotating schedule, the plant operates 24 hours The Manufacturing Production Technician is a progressive role starting with operating production drying equipment. This position is responsible for maximizing product output and maintaining specifications. Training provided. Starting pay is $24 per hour with a $1 per hour shift differential for night and weekend shifts. Pay range is: $24-$33 per hour. The plant is a 24 hour, 7 day per week operating facility. This position will work a fixed schedule with night and weekend pay differential. 80 hours of vacation, pro-rated the 1st year. Tiered pay increases as experience is gained along with advancement opportunities. Responsibilities include but are not limited to: * Operate Drum Dryers and related equipment for optimal production output while ensuring safety, quality and reliability * Change Knife blades on drum dryers * Perform Rework/Blend-back when require * Follow all Plant Safety Rules and Company Policies including perform Lockout/Tagout, Hot Work, and Confined Space work according to company and OSHA requirements * Complete shift checklists with good detail and accuracy * Maintain good Housekeeping in all work areas including scraping floors and drying equipment, cleaning overhead ledges/pipes, blowing down, sweeping, shoveling, dispose industrial waste into dumpster, etc. * Operate Industrial Powered Trucks (Forklifts) * Maintain all equipment in proper working order by performing production level maintenance when necessary. Report all equipment malfunctions * Write "Work Order Requests" Must be able to operate a forklift. Must follow all plant safety rules, keep work area clean, and perform other related duties as assigned. Qualifications: High school degree or GED required Education/Training in an industrial field or at least one year of related experience (Preferred) Mechanical Aptitude Ability and willingness to learn Experience using hand tools Previous manufacturing or chemical processing experience preferred Fork Truck operating experience preferred Drivers License preferred Competencies: Ability to communicate well and follow detailed written and verbal instructions. Strong problem solving and critical thinking abilities. Demonstrate strong judgement. Ability to effectively work as a team. Physical Demand: Lifting and handling up to 55 lbs pounds of weight is required. Occasional heavier weights may be encountered during cleanup. Working Conditions: Exposure to dust, cold and hot temperatures at times.

Job Description Production Technician -Immediate opening, starting at $24/hr.....Start earning PTO immediately Schedule is a rotating schedule, the plant operates 24 hours The Manufacturing Production Technician is a progressive role starting with operating production drying equipment. This position is responsible for maximizing product output and maintaining specifications. Training provided. Starting pay is $24 per hour with a $1 per hour shift differential for night and weekend shifts. Pay range is: $24-$33 per hour. The plant is a 24 hour, 7 day per week operating facility. This position will work a fixed schedule with night and weekend pay differential. 80 hours of vacation, pro-rated the 1st year. Tiered pay increases as experience is gained along with advancement opportunities. Responsibilities include but are not limited to: Operate Drum Dryers and related equipment for optimal production output while ensuring safety, quality and reliability Change Knife blades on drum dryers Perform Rework/Blend-back when require Follow all Plant Safety Rules and Company Policies including perform Lockout/Tagout, Hot Work, and Confined Space work according to company and OSHA requirements Complete shift checklists with good detail and accuracy Maintain good Housekeeping in all work areas including scraping floors and drying equipment, cleaning overhead ledges/pipes, blowing down, sweeping, shoveling, dispose industrial waste into dumpster, etc. Operate Industrial Powered Trucks (Forklifts) Maintain all equipment in proper working order by performing production level maintenance when necessary. Report all equipment malfunctions Write "Work Order Requests" Must be able to operate a forklift. Must follow all plant safety rules, keep work area clean, and perform other related duties as assigned. Qualifications: High school degree or GED required Education/Training in an industrial field or at least one year of related experience (Preferred) Mechanical Aptitude Ability and willingness to learn Experience using hand tools Previous manufacturing or chemical processing experience preferred Fork Truck operating experience preferred Drivers License preferred Competencies: Ability to communicate well and follow detailed written and verbal instructions. Strong problem solving and critical thinking abilities. Demonstrate strong judgement. Ability to effectively work as a team. Physical Demand: Lifting and handling up to 55 lbs pounds of weight is required. Occasional heavier weights may be encountered during cleanup. Working Conditions: Exposure to dust, cold and hot temperatures at times.

What we do... Ceres Global and its subsidiaries add value across agricultural, energy and industrial supply chains through efficient sourcing, storing, transporting and marketing of high-quality agricultural commodities, value-added products and raw materials. Leveraging its network of commodity logistics centers and team of industry experts, Ceres Global connects farmers to customers around the world. Headquartered in Minneapolis, Minnesota, Ceres Global has 12 locations across Saskatchewan, Manitoba, and Minnesota. What we need... The Production Operator's primary responsibility is work as a member of a team to safely and efficiently unload / load various types of commodities to and from ships, rail cars, or within the facility. This position requires consistent outside work, exposure to the elements, and schedule flexibility. Regular hours for this position can vary between 7 am and 5 pm, Monday through Friday and will require some overtime and weekend work at times. Starting pay is $27.04 an hour. In additionto pay, we offer eligible full-time employees and their dependents health,dental, vision, and life insurance. Other full-time employee benefits include 401(k), short term disability, long term disability, paid holidays, and paidtime off. What you'd do... ESSENTIAL DUTIES AND RESPONSIBILITIES (Other duties may be assigned) Safety Adhere to company safety policies and watch out for the safety of others Understand and follow operating procedures and safety policies Ability to perform work safely and productively with others Grain handling Assist with the unloading and loading of various raw grain commodities Perform housekeeping activities (sweeping, shoveling, cleaning) Assist with other general duties within the facility (general maintenance, landscaping) Operate railcar loading / unloading systems and equipment Operate ship loading / unloading systems and equipment Operate mobile equipment safely including trucks, frontend loader and locomotive EDUCATION/SKILLS/EXPERIENCE REQUIRED High School Diploma or GED equivalent Experience in a manufacturing or warehouse environment preferred Valid driver's license and reliable transportation to and from the facility (which is not easily accessible by public transportation) Fluent in English at a level to be able to communicate with customers and colleagues as well as able to read and understand procedures and policies Willingness to work outside in various weather conditions Basic math skills Computer skills for light data entry Strong communication skills Willing to work flexible hours and weekends as necessary As a part of the pre-employment selection process, candidates are required to submit to and receive satisfactory results from all pre-employment criminal background, drug, and employment verification checks Physical Requirements: Able to repetitively climb up and down railcars/ladders safely, walk up and down steps, and work at heights, sweep, and shovel grain Ability to work outside, including in inclement weather Can carry at least fifty (50) pounds Able to stand and walk for the majority of each shift #ceresglobal

Hours: 2nd shift; Monday - Thursday 3:30pm - 2:00am The Manufacturing Engineering Technician is responsible for performing regular repair and preventative tool maintenance, troubleshooting production tooling problems, and assisting with the introduction of new tooling and processes into production. Essential Duties and Responsibilities: * Completes assigned preventative maintenance tasks on time * Works with the manufacturing engineer and production staff to assist in root cause determination of tool related issues. Specific responsibilities include tool maintenance logs and tool recommendations to improve process quality * Ensures that all assigned work areas are kept clean, orderly, and presentable at all times by applying 5S principles * Wears proper protective equipment * Complies with all paperwork, such as work instructions, that govern job duties. May be assigned to different work areas as production needs require * Address sustaining problems with tool/process improvement recommendations and/or engineering change requirements submitted through the area Manufacturing Engineer * Will be required to perform other duties as requested, directed or assigned Education and/or Experience: High School Diploma or GED Knowledge, Skills, Abilities: * Ability to operate measurement tools including scales, micrometers, and calipers * Ability to operate basic hand tools such as screw drivers, drill drivers, hammers, etc * Read and interpret engineering drawings * Ability to assemble off engineering drawings * Knowledge of basic machinery design, use, repair, and maintenance * Attention to detail * Must be able to work as part of a team * Microsoft Office This opportunity is located in Duluth, Minnesota. As the home to our corporate headquarters, Duluth is a four-season city on the western tip of Lake Superior and was voted "Best Town" by Outside Magazine. The splendor of the largest freshwater lake in the world offers a multitude of outdoor activities for adventure or rejuvenation. The North Shore lifestyle is known its year-round activities, including bicycle and snowmobile trails, kayaking, rock climbing, fishing, hiking, golfing, sailing and skiing. And as a top employer in the area, Cirrus Aircraft was recently named "Best Overall Large Company to Work for in the Northland" and "Best Workplace Culture" by the Duluth News Tribune readers. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law. Our Benefits: Cirrus provides a range of exciting benefits, including: * 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. * Employer-Paid Coverages: Group term life, short- and long-term disability insurance. * Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. * Free Health Tracking: With rewards for meeting health goals. * Generous PTO: 100 + hours accrued within the first year. * Employee Referral Bonus: For referring talented candidates. * Career Development: Tuition reimbursement and professional growth opportunities. * Exclusive Discounts: Access to partner and marketplace discounts. * Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus!

Job DescriptionBenefits: Overtime Opportunities 401(k) Competitive salary Opportunity for advancement Paid time off Training & development Production Technician Bring Restoration to Life Are you dependable, driven, and energized by tangible results? Do you take pride in helping others bounce back from setbacks? Join our veteran-led, family-run team where we dont just restore propertieswe bring them back to life, making fire and water damage disappear Like it never even happened! Why Youll Love Working Here A Supportive Culture: Were a tight-knit, energetic crew fueled by respect, work ethic, and genuine support. Mission That Matters: Every action you take helps families and businesses reclaim their spaceand peace of mind. Growth & Learning: Sharpen your skills, pursue IICRC certifications, and build a career utilizing state-of-the-art industry technologynot just a job. What Youll Do Collaborate closely with Project Managers and Leads to drive restoration projects from start to finish. Load gear, tools, and supplies with precision and care. Follow all safety and risk protocols to ensure a secure work environment. Prep work zones and carry out demolition, cleanup, drying, moisture checks, and material removal. Coordinate with your team to ensure efficiency throughout each project. Wrap up each job with thorough cleanup and breakdown of tools and equipment. Keep our warehouse, office, and grounds shipshape through regular maintenance. Maintain cleanliness and sanitation of all gear and vehicles. Embrace ongoing training and development to elevate your restoration expertise. What You Bring A solid work ethic, honesty, and accountability. Good communication skillsyou talk with the team, not at them. A High School diploma/GED. Restoration, construction, or related experiencedefinitely a plus but not required. IICRC certifications? Even better! A valid drivers license and willingness for on-call shifts. Physical readiness for activity: think moving up to 100 lbs (with help), climbing ladders, working in attics/ tight spaces, working with your hands, and handling repetitive tasks. Schedule Full-time, between the hours of 7AM7PM (MonFri), minimum 40hrs/week. Expect evenings, occasional weekends, and local travelwith occasional out-of-area work. Physical Demands Frequent lifting up to 50 lbs, occasional up to 100 lbs (assisted), working overhead, in confined spaces, utilizing SERVPRO Solvents, hand tools and on feet all day. Ready to Make a Difference? If you're looking for a role where hard work, reliability, and care truly matterswhere every day brings a new restoration missionjoin us. Let's make the hard times Like it never even happened, together. Apply Now Send your resume, certifications, or a note about why you shine in handson, detail-driven roles. We're excited to meet the person who brings both grit and heart to the job.

Ready to join a six-time U.S. Best Managed Company? At KENT Worldwide, we're seeking a Production Specialist at our Superior, WI Facility. is designed and intended to be performed in Superior, WI. The position of Production Technician measures, blends, and pasteurizes product while following all safety guidelines, process controls, operating procedures, work instructions, and requirements set up by the FDA and upper management. They also clean and sanitize the production equipment, utensils, and environment according to relevant work instructions. Communication with other on-site departments will be instrumental in a Production Technician's ability to ensure batches meet all required specifications in a timely manner. Primary Duties & Responsibilities: * Participate in Preventive Control, Quality, and Safety initiatives. * Follow written SOPs / Work Instructions, along with GMPs, and other core procedures as applicable. * Complete all required pre-op and post-op sanitation and cleaning. * Measure batches accurately with proper documentation. * Blend and Pasteurize batches while completing required documentation. * Record and communicate any deviations to quality and supervisor. * Follow procedures to complete required sanitation of processing equipment, as well as ingredient containers and measurement utensils. * Assist on the packing line as needed. * Maintain work areas in a clean and orderly manner. * Routinely navigate and utilize digital user interfaces (PLC screens, android mobile devices) to complete picking work, product pasteurization, and equipment cleaning. Education, Experience & Qualifications: * High School diploma or equivalent * Demonstrated work reliability * The ability to do basic math (+-x÷) * Read and write clearly * Basic Computer Literacy

Ready to join a six-time U.S. Best Managed Company? At KENT Worldwide™ , we're seeking a Production Specialist at our Superior, WI Facility. is designed and intended to be performed in Superior, WI. The position of Production Technician measures, blends, and pasteurizes product while following all safety guidelines, process controls, operating procedures, work instructions, and requirements set up by the FDA and upper management. They also clean and sanitize the production equipment, utensils, and environment according to relevant work instructions. Communication with other on-site departments will be instrumental in a Production Technician's ability to ensure batches meet all required specifications in a timely manner. Primary Duties & Responsibilities: Participate in Preventive Control, Quality, and Safety initiatives. Follow written SOPs / Work Instructions, along with GMPs, and other core procedures as applicable. Complete all required pre-op and post-op sanitation and cleaning. Measure batches accurately with proper documentation. Blend and Pasteurize batches while completing required documentation. Record and communicate any deviations to quality and supervisor. Follow procedures to complete required sanitation of processing equipment, as well as ingredient containers and measurement utensils. Assist on the packing line as needed. Maintain work areas in a clean and orderly manner. Routinely navigate and utilize digital user interfaces (PLC screens, android mobile devices) to complete picking work, product pasteurization, and equipment cleaning. Education, Experience & Qualifications: High School diploma or equivalent Demonstrated work reliability The ability to do basic math (+-x÷) Read and write clearly Basic Computer Literacy

Acuren is currently recruiting for NDT Level II Technician(CR/DR a plus) to support operations in Duluth, MN. THIS WILL BE A FULL-TIME (NESTED) POSITION. SIGN-ON BONUS AND RELOCATION ASSISTANCE AVAILABLE FOR QUALIFIED APPLICANTS. Responsibilities Set up and calibrate nondestructive testing equipment Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations Apply testing criteria in accordance with applicable specifications or standards and evaluate results Interpret radiographs, cathode ray tube (CRT) or digital readouts, conductivity meters and visual indicators Organize and report test results Perform specialized inspections May instruct and supervise others Perform other job-related tasks as assigned by management Requirements High School Diploma or equivalent Some college preferred Certified Level II Technical background in NDT methods and procedures Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections Knowledge of NDT equipment Experience in report writing Benefits Competitive salary Medical, dental, vision, and supplemental insurance 401K Plan Paid Holidays Paid Time Off Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability , Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-SP1

Hours: 2nd shift; Monday - Thursday 3:30pm - 2:00am The Manufacturing Engineering Technician is responsible for performing regular repair and preventative tool maintenance, troubleshooting production tooling problems, and assisting with the introduction of new tooling and processes into production. Essential Duties and Responsibilities: Completes assigned preventative maintenance tasks on time Works with the manufacturing engineer and production staff to assist in root cause determination of tool related issues. Specific responsibilities include tool maintenance logs and tool recommendations to improve process quality Ensures that all assigned work areas are kept clean, orderly, and presentable at all times by applying 5S principles Wears proper protective equipment Complies with all paperwork, such as work instructions, that govern job duties. May be assigned to different work areas as production needs require Address sustaining problems with tool/process improvement recommendations and/or engineering change requirements submitted through the area Manufacturing Engineer Will be required to perform other duties as requested, directed or assigned Education and/or Experience: High School Diploma or GED Knowledge, Skills, Abilities: Ability to operate measurement tools including scales, micrometers, and calipers Ability to operate basic hand tools such as screw drivers, drill drivers, hammers, etc Read and interpret engineering drawings Ability to assemble off engineering drawings Knowledge of basic machinery design, use, repair, and maintenance Attention to detail Must be able to work as part of a team Microsoft Office This opportunity is located in Duluth, Minnesota. As the home to our corporate headquarters, Duluth is a four-season city on the western tip of Lake Superior and was voted “Best Town” by Outside Magazine . The splendor of the largest freshwater lake in the world offers a multitude of outdoor activities for adventure or rejuvenation. The North Shore lifestyle is known its year-round activities, including bicycle and snowmobile trails, kayaking, rock climbing, fishing, hiking, golfing, sailing and skiing. And as a top employer in the area, Cirrus Aircraft was recently named “Best Overall Large Company to Work for in the Northland” and “Best Workplace Culture” by the Duluth News Tribune readers. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law. Our Benefits: Cirrus provides a range of exciting benefits, including: 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. Employer-Paid Coverages: Group term life, short- and long-term disability insurance. Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. Free Health Tracking: With rewards for meeting health goals. Generous PTO: 100 + hours accrued within the first year. Employee Referral Bonus: For referring talented candidates. Career Development: Tuition reimbursement and professional growth opportunities. Exclusive Discounts: Access to partner and marketplace discounts. Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus!

Acuren is currently recruiting for NDT Level II Technician(CR/DR a plus) to support operations in Duluth, MN. THIS WILL BE A FULL-TIME (NESTED) POSITION. SIGN-ON BONUS AND RELOCATION ASSISTANCE AVAILABLE FOR QUALIFIED APPLICANTS. Responsibilities * Set up and calibrate nondestructive testing equipment * Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection * Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations * Apply testing criteria in accordance with applicable specifications or standards and evaluate results * Interpret radiographs, cathode ray tube (CRT) or digital readouts, conductivity meters and visual indicators * Organize and report test results * Perform specialized inspections * May instruct and supervise others * Perform other job-related tasks as assigned by management Requirements * High School Diploma or equivalent * Some college preferred * Certified Level II * Technical background in NDT methods and procedures * Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections * Knowledge of NDT equipment * Experience in report writing Benefits * Competitive salary * Medical, dental, vision, and supplemental insurance * 401K Plan * Paid Holidays * Paid Time Off Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-SP1