Manufacturing technician jobs in Fairfield, CT - 144 jobs

For more than 50 years, Photronics has been a global leader in photomask technology, powering the innovation behind the world's most advanced devices. Our success is built on collaboration, quality, and the dedication of our people. We are hiring a Manufacturing Technician to join our team in Brookfield, CT. This is an entry-level role responsible for assisting in daily operations by following established procedures to set up, operate, and monitor manufacturing equipment in a cleanroom environment. This role develops foundational skills in equipment operation, process monitoring, and documentation while learning to adhere to Photronics' safety and quality standards. Location: Photronics' Corporate Headquarters - Brookfield, CT (US). This is an on-site position, and we are not open to remote candidates at this time. Weekend Shift available- Fri, Sat Sun 6am-6pm Responsibilities Maintain accurate documentation in a centralized repository. Operate basic manufacturing equipment under supervision and according to standard operating procedures (SOPs). Perform equipment and process checks, escalating issues to senior technicians or supervisors. Record accurate production data and maintain logs in a central repository. Follow cleanroom protocols, PPE, and safety standards consistently. Support continuous improvement initiatives by providing feedback and observations. Collaborate with Engineering, trainers, and senior technicians. Additional responsibilities as assigned. Travel: No travel required. Qualifications (Knowledge, Skills & Attributes) Strong attention to detail, organizational skills, and ability to follow SOPs. Ability to work effectively in a cleanroom environment. Team-oriented with strong communication skills. Proficiency in Microsoft Office and data entry systems. Experience 0-2 years of manufacturing, production, or cleanroom experience preferred. Education High School Diploma, GED, or equivalent work experience. Why Photronics Be part of a global technology leader driving innovation for the world's biggest tech companies. Work in a collaborative, growth-focused environment where your expertise will have a real impact. Develop your leadership skills by mentoring and guiding a talented accounting team. Enjoy stability, challenge, and opportunity at a company with more than 50 years of proven success Competitive salary and annual bonus program. Equity compensation eligibility. Full suite of health and welfare benefits. 401k with company match. Equal Opportunity Statement: We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace. We are committed to providing reasonable accommodation for team members' disabilities and religious beliefs or practices. Agency Notice: Photronics does not accept unsolicited resumes or outreach from search firms or employment agencies. Please, no phone calls or emails to any employee regarding this opening. Resumes submitted outside of our approved agency engagement process will be considered the sole property of Photronics, and no fees will be paid if such candidates are hired. Only agencies with a valid agreement in place with Photronics and assigned to this role may submit candidates.

Responsible for the implementation of lean and six sigma process improvement projects. This position is “hands on” and mechanically inclined to bridge the gap between existing work stations and practices, to new and improved work stations and practices. The position requires the ability to build new workstations as recommended and train new lead people on operational logistics. Responsibilities: Assembles, sets up and organizes the workstations in the cells. Collects workstation related information such as equipment, services, tools and fixtures. Coordinates in procuring/fabricating the tools and fixtures and other workstation related equipment. Helps set up material and parts kanbans. Establishes Total Productive Maintenance (TPM) schedules and follows up on uptimes on the machines/ equipment involved in the project. Coordinates and helps in kaizen projects (5-S, workstation reorganization, etc.). Performs other tasks related to Lean/Six Sigma projects, depending upon the type of project, i.e., office, safety, ergonomic, etc. Requirements: Trade School graduate minimum. Associate's Degree preferred; Two or more years' experience in a maintenance or assembly technician role in a manufacturing environment with experience in a lean environment preferred; Basic knowledge of lean/six sigma practices and principles; Ability to assemble workstations with good knowledge of blueprints, tools and fixtures; Good working knowledge of hydraulics/ pneumatic systems; Ability to create and follow work instructions; Ability to coordinate with suppliers in procuring tools and items related to workstation organization; Ability to identify and assist with implementation of lean / CI projects. Knowledge of safety and ergonomic principles (proactive vs reactive with EHS standards) This person should be a team player with good communication skills Ashcroft Inc. is an Equal Employment Opportunity Employer EOE AA M/F/Veteran/Disability Please note: The position requires U.S. Citizen, Permanent Legal Resident or granted Asylee/Refugee status under the Immigration and Nationality Act.

JOB TITLE: Manufacturing Technician TYPE: Full time, regular COMPENSATION: $22.00/hr - $32.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Manufacturing Technician will play a key role in supporting the production and assembly of our advanced electro-mechanical device, SectionStar , as part of a close-knit manufacturing team. This role is hands-on, requiring expertise in assembling, testing, and troubleshooting components and systems to meet quality and performance standards. The ideal candidate would have experience working in a fast-paced production environment, preferably with medical devices, and a strong understanding of manufacturing processes and tools. We are looking for a detail-oriented team player who values precision and views medical device development as a competitive advantage. Responsibilities: Assemble, calibrate, and test electro-mechanical subsystems according to established procedures and specifications Troubleshoot and repair mechanical, electrical, and electronic components to ensure functionality and performance Conduct quality checks at various stages of production to ensure adherence to quality standards and specifications Follow all production activities in compliance with regulatory requirements (ex: ISO 13485, FDA) Maintain and troubleshoot manufacturing equipment to ensure optimal performance and minimal downtime Collaborate with engineering and quality teams to implement process improvements and resolve production issues Maintain a clear and safe working environment by following company safety protocols and procedures Qualifications: Minimum HS Diploma / GED or equivalent experience 1-3 years of manufacturing experience, preferably in medical device, electro-mechanical, optical, or automotive industries Strong attention to detail, organizational skills, and self-discipline to maintain compliance and quality standards Ability to read, interpret, and follow work instructions, specifications, and engineering drawings Strong interpersonal, verbal, and written communication skills Ability to work both independently and collaboratively in a team-oriented environment Flexibility to adapt to a fast-paced and evolving environment and assist others as needed Basic computer skills with proficiency in standard business software (ex: Microsoft Office) and a willingness to learn new technologies Mechanically inclined, with a curiosity to learn and a drive to meet aggressive milestones and deadlines Familiarity with ISO 13485 and experience developing tooling to improve processes a plus Familiarity with continuous improvement principles and experience supporting process enhancements a plus Knowledge of equipment maintenance and calibration processes a plus Work Environment: This role requires standing for extended periods, working with small components, and operating machinery in a fast-paced production environment. Flexibility to work occasional overtime may be required to meet production demands Company Offers: Competitive salary, commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) Overtime opportunities available for those interested in additional hours A collaborative and diverse work environment where our teams thrive on solving complex challenges A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Responsibilities Deliver on production goals, while focused on safety and quality Produce product per recipes and SOP's, maintaining high quality standards Package product into proper containers with proper labeling to ensure compliance with state regulations Ensure all standards for processing procedures and laboratory protocols are followed Compliance with local and state regulations Adherence to quality control methods throughout entire process Documentation of manufacturing methods are created and maintained Electronically convert packaged products in the state traceability system Manage time efficiently to meet goals while consistently producing quality product Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift Exhibit competency in basic organizational skills, communication skills and Windows based operating software Use independent judgment regarding product processing, keeping quality and goals in mind Help create a positive environment by having a positive attitude and by being self-motivated Other duties as assigned Qualifications High School Education or GED graduate; some college or college graduate preferred 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred Equivalent combinations of education and experience may be considered Must be able to work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure, and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI Ability to listen well and communicate effectively with various audiences Ability to perform monotonous tasks with great efficiency without losing qualities Must be able to follow basic instructions and accept constructive criticism Prior cannabis experience not required Additional Requirements Must have a valid driver's license or State ID card Must be a minimum of 21 years of age Must pass all required background checks Must be and remain compliant with all legal and company regulations for working in the industry Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil).

We are seeking a detail-oriented Manufacturing Technician to join our team on Night shift schedule: 10:00 PM to 6:30 AM, 5 days a week. This role involves assembling, integrating, and qualifying advanced technical products in a cleanroom environment, following precise specifications and procedures. Core Responsibilities Product Assembly & Testing accurately build and test high-precision equipment by following detailed technical documentation. Report recurring issues and contribute to process optimization alongside engineering and quality teams. Support Daily Operations Execute production tasks according to set protocols and timelines. Troubleshoot minor technical issues and keep detailed logs of completed work and hand-offs between shifts. New Product Support Participate in trial runs for new products and provide input to improve documentation and assembly methods. Identify and communicate risks that may affect production timelines. Technical Knowledge Development continuously expand knowledge of system components, tools, and procedures to support efficient assembly and diagnostics. Team Collaboration Work with peers to meet production goals, assist in training new team members, and contribute ideas for improving efficiency and quality. Health & Safety strictly follow all cleanroom and safety protocols, including the use of personal protective equipment and compliance with environmental and health guidelines. Requirements High school diploma or GED required At least 2 years of hands-on mechanical assembly experience, preferably with precision tools Comfortable using software applications for diagnostics and production tracking (experience with ERP systems, LabVIEW, or testing software is beneficial) Familiarity with lean manufacturing principles such as 5S, Kaizen, and continuous improvement Ability to read and follow detailed procedures and interpret technical data accurately Comfortable working independently or within a team in a fast-paced, highly regulated environment Work Environment & Physical Expectations This role takes place in a temperature-controlled cleanroom following strict quality and environmental standards Full-body PPE required throughout shift, including gowning multiple times daily Frequent standing, walking, bending, reaching, and occasional lifting of up to 35 lbs Must be comfortable working at heights, using ladders and platforms, and operating handling equipment such as pallet jacks or overhead cranes Visual acuity requirements include close vision, color differentiation, and depth perception Additional DetailsDue to regulatory compliance, applicants must be eligible to access controlled technology under U.S. export laws prior to the start date. Priority will be given to candidates who already meet this requirement. HAMILTON CONNECTIONS IS AN EQUAL OPPORTUNITY EMPLOYER

For more than 50 years, Photronics has been a global leader in photomask technology, powering the innovation behind the world's most advanced devices. Our success is built on collaboration, quality, and the dedication of our people. We are hiring a Manufacturing Technician to join our team in Brookfield, CT. This is an entry-level role responsible for assisting in daily operations by following established procedures to set up, operate, and monitor manufacturing equipment in a cleanroom environment. This role develops foundational skills in equipment operation, process monitoring, and documentation while learning to adhere to Photronics' safety and quality standards. Location: Photronics' Corporate Headquarters - Brookfield, CT (US). This is an on-site position, and we are not open to remote candidates at this time. Weekend Shift available- Fri, Sat Sun 6am-6pm Responsibilities * Maintain accurate documentation in a centralized repository. * Operate basic manufacturing equipment under supervision and according to standard operating procedures (SOPs). * Perform equipment and process checks, escalating issues to senior technicians or supervisors. * Record accurate production data and maintain logs in a central repository. * Follow cleanroom protocols, PPE, and safety standards consistently. * Support continuous improvement initiatives by providing feedback and observations. * Collaborate with Engineering, trainers, and senior technicians. * Additional responsibilities as assigned. Travel: No travel required. Qualifications (Knowledge, Skills & Attributes) * Strong attention to detail, organizational skills, and ability to follow SOPs. * Ability to work effectively in a cleanroom environment. * Team-oriented with strong communication skills. * Proficiency in Microsoft Office and data entry systems. Experience * 0-2 years of manufacturing, production, or cleanroom experience preferred. Education * High School Diploma, GED, or equivalent work experience. Why Photronics * Be part of a global technology leader driving innovation for the world's biggest tech companies. * Work in a collaborative, growth-focused environment where your expertise will have a real impact. * Develop your leadership skills by mentoring and guiding a talented accounting team. * Enjoy stability, challenge, and opportunity at a company with more than 50 years of proven success * Competitive salary and annual bonus program. * Equity compensation eligibility. * Full suite of health and welfare benefits. * 401k with company match. Equal Opportunity Statement: We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace. We are committed to providing reasonable accommodation for team members' disabilities and religious beliefs or practices. Agency Notice: Photronics does not accept unsolicited resumes or outreach from search firms or employment agencies. Please, no phone calls or emails to any employee regarding this opening. Resumes submitted outside of our approved agency engagement process will be considered the sole property of Photronics, and no fees will be paid if such candidates are hired. Only agencies with a valid agreement in place with Photronics and assigned to this role may submit candidates.

By joining Bio-Techne, you'll join a company with a powerful and positive purpose of enabling cutting-edge research in Life Sciences and Clinical Diagnostics. Bio-Techne, and all of its brands, provides tools for researchers to further treat and prevent disease worldwide. Pay Range: $19.20 - $26.40 Position Summary: Join the most innovative, imaginative, and fun-loving team in life science. Bio-Techne's Protein Platform Division is looking for a Manufacturing Technician with the motivation to participate in the growth of a fast-paced company engaged in cutting-edge biological research. The successful applicant will work with other members of the consumables production team to support and sustain manufacturing activities for capillary coating and cartridge fabrication in an ISO 13485 environment. Hours: Monday to Friday, 3 PM to 11:30 PM (2nd Shift) Key Responsibilities: Operate semi-automated custom equipment and software. Perform entry-level manufacturing functions. Conduct in-process QC inspections and documentation. Assist process engineers and multidisciplinary teams in improvements and troubleshooting. Detail-oriented, quick learner, responsive to feedback, and clear communicator. Ensure continual ISO 13485 quality compliance. Read and follow SOPs, WIs, and regulatory documents. Excellent written and spoken English communication skills. Safety-minded with disciplined workmanship. Familiar with Microsoft Office and basic ERP functions. Able to learn new skills and concepts as needed. Follow supervisor priorities. Adapt to daily changes within expected boundaries. Complete assigned compliance training. Meet quality and productivity expectations. Participate in continuous process improvement under supervision. Work independently on routine tasks. Experience: Experience with manufacturing, medical device manufacturing is a plus. Working with a microscope daily and understanding the use of space under a microscope is a plus. Education: High School Diploma and 2+ years' experience in a relevant manufacturing environment Why Join Bio-Techne: We offer competitive insurance benefits starting on day one: medical, dental, vision, life, short-term disability, long-term disability, pet, and legal and ID shield. We invest in our employees' financial futures through 401k plans, an employee stock purchase plan (ESPP), Health Saving Account (HSA), Flexible Spending Account (FSA), and Dependent Care FSA. We empower our employees develop their careers through mentorship, promotional opportunities, training and development, tuition reimbursement, internship programs, and more. We offer employee resource groups, volunteer paid time off, employee events, and charity drives to build a culture of caring and belonging. We offer an accrued leave policy with paid holidays, paid time off, and paid parental leave. We foster a culture of empowerment and innovation, where employees feel valued and encouraged to bring their new ideas to the table. Bio-Techne is an E-Verify Employer in the United States. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. To protect the interests of all, Bio-Techne will not accept unsolicited resumes from any source other than a candidate application. Any unsolicited resumes sent to Bio-Techne will be considered Bio-Techne property.

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You'll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers) Read and interpret technical drawings, blueprints, and work instructions Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions Ensure production tasks are completed on schedule, safely, and to the required quality Perform other related duties as needed to support efficient operations Requirements High school diploma, GED, or equivalent work experience Strong communication and collaboration skills Ability to interact effectively (verbal and written) with engineering, production, and quality teams Experience in New Product Introduction (NPI) or development environments Precision drilling experience (tolerance ~ ±0.001 in) Experience in aerospace, aviation, military, medical device, or other high-reliability industries Ability to read and interpret advanced technical drawings, manuals, and reports Proficient use of precision measuring instruments Experience working in cleanroom or controlled environments Familiarity with forklifts, cranes, or heavy equipment Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Wellness Resources

Zendex Tool Corp. - Danbury, CT Build your future with a company that builds with pride. Zendex Tool Corp. is a family-owned manufacturer with over 40 years of experience crafting high-quality vehicle mobility and lifting solutions. We believe in teamwork, craftsmanship, and caring for our people like family. We live by our SCORE values - Safety, Communication, Organization, Reporting, and Efficiency - and we're looking for motivated individuals who share those same standards. What You'll Do Operate manufacturing equipment (press brakes, punches, sandblasters, etc.) safely and efficiently Fabricate, assemble, and package products with accuracy and attention to detail Assist welders and powder coat operations Maintain an organized, clean workspace and communicate with your team to keep things running smoothly Who You Are Motivated, reliable, and eager to learn Mechanically inclined or have hands-on experience (manufacturing or restaurant back-of-house a plus) Organized and proud of your work Able to lift 50 lbs and follow clear instructions Schedule & Benefits Starting Pay : $16-18/hr, Annualized Income $33,000 up to $47,000 (assuming peak shift hours) Current Hours, M-F 7:00 AM-3:15 PM (with paid break + lunch) Peak Hours, M-F 7:00 AM- 5:00 PM (with paid breaks + lunch) 401(k) with 5% company match Annual bonus, paid vacation, sick time, and PTO for medical appointments Safe, team-oriented, and growth-focused environment 👉 Apply today and grow with a team that values craftsmanship, safety, and continuous improvement.

Job DescriptionManufacturing Associate - (Assembly & Metal Fabrication) Zendex Tool Corp. - Danbury, CT Build your future with a company that builds with pride. Zendex Tool Corp. is a family-owned manufacturer with over 40 years of experience crafting high-quality vehicle mobility and lifting solutions. We believe in teamwork, craftsmanship, and caring for our people like family. We live by our SCORE values - Safety, Communication, Organization, Reporting, and Efficiency - and we're looking for motivated individuals who share those same standards. What You'll Do Operate manufacturing equipment (press brakes, punches, sandblasters, etc.) safely and efficiently Fabricate, assemble, and package products with accuracy and attention to detail Assist welders and powder coat operations Maintain an organized, clean workspace and communicate with your team to keep things running smoothly Who You Are Motivated, reliable, and eager to learn Mechanically inclined or have hands-on experience (manufacturing or restaurant back-of-house a plus) Organized and proud of your work Able to lift 50 lbs and follow clear instructions Schedule & Benefits Starting Pay : $16-18/hr, Annualized Income $33,000 up to $47,000 (assuming peak shift hours) Current Hours, M-F 7:00 AM-3:15 PM (with paid break + lunch) Peak Hours, M-F 7:00 AM- 5:00 PM (with paid breaks + lunch) 401(k) with 5% company match Annual bonus, paid vacation, sick time, and PTO for medical appointments Safe, team-oriented, and growth-focused environment 👉 Apply today and grow with a team that values craftsmanship, safety, and continuous improvement. Powered by JazzHR rA5csl5YnG

Education and Experience: High School Diploma or GED Ability to stand for long periods of time Experience in a manufacturing or similar setting (preferred) Experience in rubber molding (preferred) Ability to lift up to 50 pounds with or without a reasonable accommodation Good vision (with or without corrective lenses) Fine motor skills in hands/wrist and good hand/eye coordination Physical Requirements for a Manufacturing Associate: This position requires the ability to lift and carry up to 25 lbs. frequently during the workday. Most of the day is spent in a standing position with frequent bending and/or squatting. Benefits: Medical, dental, and disability benefits Healthcare and dependent care FSA and HSA programs Bonus/incentive opportunity Paid Time Off Paid Parental Leave Reward and recognition programs Training and development 401(k) retirement savings plan with company match Tuition reimbursement Company Paid Life Insurance: Employee / Spouse / Child Supplemental Disability and Life Plans are available Employee Assistance Program (EAP) Salary Info: This is a first-shift position with a starting rate commensurate with experience, starting range $20.00 - $23.00 based on experience This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. Green Card Holder), Political Asylee or Refugee. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) As an EEO/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disability status

Hiring a Lab Technician in Farmingdale NY!Overview Join a dynamic and fast‑paced healthcare team as a Lab Technician, supporting critical clinical trials by assembling and preparing viral testing kits. This role is perfect for someone with a strong understanding of clinical and medical terminology who thrives in a detail‑oriented, hands-on environment. Your work will directly support life‑changing diagnostics and research. Key Responsibilities + Accurately label test tubes, vials, solutions, swabs, and other materials for viral testing kits. + Assemble testing kits by following precise instructions and quality standards. + Collaborate effectively with team members, contributing to a positive and supportive work environment. + Assist cross‑functionally where needed, demonstrating adaptability in a fast-moving setting. + Communicate clearly with supervisors and colleagues to ensure smooth workflow. Essential Skills + Strong understanding of clinical and medical terminology. + Experience in sample processing, phlebotomy, laboratory work, or related healthcare settings. + Ability to excel in a repetitive, detail-driven role with accuracy and consistency. Additional Qualifications + Positive, friendly, and easy-going demeanor. + Ability to take direction well and shift between tasks smoothly. Work Environment & Schedule + Work takes place in a clean laboratory setting, assembling testing kits-no handling of specimens and no tools required. + Responsibilities involve preparing various types of kits based on client specifications. + Standard schedule: Monday-Friday, 8:00 AM to 4:30 PM, with a 30‑minute unpaid lunch. + Occasional Saturday shifts and extended hours until 6:30 PM during peak demand periods. + Reduced summer hours can be expected during slower seasons Job Type & Location This is a Contract to Hire position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Job Description Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Job Description Required Qualifications: High School Diploma or equivalent - Required Quality Inspection Experience (2 to 4 years) Strongly Preferred High attention to detail and consistency Experience with basic measuring equipment such as calipers or micrometers and other common inspection tools Experience reading and interpreting blueprints and specifications Experience in a smaller production environment Some experience with Visual Measuring Systems desired Responsibilities: Scope: Our Quality Inspectors compare measurements, form, fit, function, and value judgments of simple and complex parts to blueprint specifications and general workmanship standards using documents, experience, and knowledge of inspection techniques of Saint-Gobain/American Seal & Engineering Co. The Quality Inspector is responsible for ensuring Good Documentation Practices are utilized throughout all quality records that are reviewed/completed/inspected/audited. Essential Functions: Inspect manufactured product for dimensional consistency, workmanship and finish. Maintains the flow of product through inspection in a timely manner meeting due dates for outside processes and customer deliveries. Inspects incoming materials for conformance to requirements, reviews certifications for conformance, issues DMR or NCMR in our ERP system if needed. Performs In-process inspection. Reviews certification packages for product and releases for shipment in ERP system. Files electronic data on server and maintains accurate and orderly certification files in QA. Assists the lead Inspector and department manager as needed. Other tasks as assigned. Comments/Special Instructions: Ideal candidate will have previous experience in a fast-paced manufacturing environment.

Maintains operation readiness by upholding safety, quality and compliance standards. Demonstrates ownership of both strategic and tactical initiatives related to machine operations. Serves as a key liaison between production and technical support teams to ensure optimal equipment performance, product quality and workplace safety. ESSENTIAL DUTIES AND RESPONSIBILITIES: Proficient in basic operation of at least 3 of the Production Technician specialties. For example, Ransohoff cleaning, Rosler deburring, operating production presses, tapping machines, locker machines, laser cutter, groover, CNC, prime/paint or other secondary equipment in use. Maintains tooling and proactively monitors tool wear; oversees tool installation for secondary operation machinery when applicable, setups as required. Recommends preventative maintenance tooling equipment on secondary operation machinery as needed. Prepares and tests equipment for safety and productivity prior to production runs, when applicable. Collaborates with cross-functional teams to contribute ideas for continuous improvement. Demonstrates working knowledge of applicable part numbers, materials and processes. Monitors inventory and non-inventory material consumption to help prevent stockouts. Proficient in reading and interpreting technical drawings and work orders. Utilizes basic computer skills to fulfill work order requirements an verify count operations. Proficient at performing in-process inspections and dimensional inspections of key characteristics and other attributes using inspection devices such as micrometer, caliper, and optical measurement equipment. If required, conducts SPC, reaction plans and executes control plans as necessary. Awareness and understanding of ERP system, scrap, and NCR processes. Applies knowledge of general safety and organization (6S), Safety Data Sheet (SDS) and Foreign Object Debris/Damage (FOD) requirements. Applies knowledge of Quality and Environment Management System (QEMS). Report immediately any machine or process challenges and all suspicious and hazardous conditions to a lead or manager. Understand and observe all safety guidelines and assure quality and safety by complying with all appropriate Click Bond policies and procedures. Assist in maintaining clean, orderly and hazard-free work areas. Able to work with minimal supervision, be a self-starter and be detail oriented. Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to gain and demonstrate the following competencies: Exceptionally detail-oriented with the ability to maintain uninterrupted focus on tasks for up to four hours. Demonstrates strong analytical, critical thinking, problem-solving, and organizational skills. Proficient in reading and interpreting technical drawings, visual aids, and work instructions; able to preform duties from memory, written instructions, or visual references. Skilled in the use of assembly and measuring tools, with the ability to perform statistical mathematics as needed. Excellent communicator - both written and verbal - with a reputation for being a good listener, objective translator and effective team builder. A lifelong learner with a consistent curiosity and drive to acquire new knowledge and apply modern best practices. Provides technical assistance to team members with their assignments as directed. A dependable team player who influences and works effectively across all levels of the organization. Must have a good command of the English language relative to the work responsibilities, both written and verbal. EDUCATION AND/OR EXPERIENCE: Minimum of High School Diploma or General Education Diploma (G.E.D.) required. Minimum 2 years production machine operator experience, or, demonstrated knowledge and skills in a manufacturing environment. Technical school preferred. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Light physical effort equal to frequent lifting or moving of lightweight materials. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Use of hand/fingers continuously through shift to manipulate components, tools, etc. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus. Regularly required to sit or stand for the length of shift, bend and reach. Able to hear typical verbal instructions and common mechanical noises indicative of safe practices. CLICK BOND WAY - KEY ATTRIBUTES: Communicates respectfully to all team members, vendors, and visitors. Models a positive attitude. Actively listens to others and supports the team environment. Asks questions and learns from mistakes. Executes tasks with minimal errors in a timely and efficient manner. Attendance is consistent and meets or exceeds company standards. Click Bond is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information or any other protected classification. Click Bond complies with federal and state disability laws. Click Bond will provide reasonable accommodation when requested by a qualified applicant or employee with a disability unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact People Operations at ************ or email: *********************

The Production Technician is responsible for all aspects of plant processing from post-crop harvest through packaging and labeling of the final product ready for customer sale as outlined by the management team and SOPs. These responsibilities include post-harvest tasks including the drying and curing stage all the way through trimming, packaging, and labeling the product. This position works in a timely manner and strives to increase productivity and acts with professional regard to the management and use of all production facilities and processing equipment. Major Areas of Responsibility include: Assists in the post-harvest plant processing of cannabis. Fan leaf removal, harvest, drying, trimming, curing, weighing, packaging, labeling, recording, and inspection of product in addition to cleaning and sanitation. Maintains a clean and organized work environment. Transport harvested plants to drying room and hang to be dried. Hand trims and/or operates a trimming machine to remove excess plant material. Weighs, records, and shreds plants waste and adds a non-cannabis medium for compliant disposal. Receives instructions and assists on tasks as delegated by management team. Works in a quick and efficient manner. Complies with all HR policies including confidentiality and non-disclosure. Minimum Qualifications (Skills, Knowledge & Abilities): All applicants must be at least 21 years of age. 1-3 years of experience in production position; including hands-on production activities. General knowledge of weights and measurement. Evening/night/weekend work may be required. Speed and precision with equipment and attention to detail. Ability to multi-task and maintain work consistency on a daily basis. High attention to detail. Standing/sitting for long periods of time. Pay rate: $19.00 / hour, plus benefits Travel %: 0 FLSA status: Non-exempt Additional Abilities Required: Exposure to pollen, dust, and plant particles due to the handling of raw plant materials. The job requires physical activity, including prolonged sitting, standing, repetitive bending, climbing, and lifting or moving up to 50 pounds (or more with a coworker). Good visual acuity, hand-eye coordination, manual dexterity, and ability to perform repetitive motions with accuracy is required. The noise level in the work environment is usually moderate. Note: Nothing in this job description restricts the company's right to assign or reassign duties and responsibilities to this position at any time. Reasonable accommodations may be made in appropriate circumstances to enable individuals to perform the essential functions of the positio n. About The Cannabist Company (f/k/a Columbia Care) The Cannabist Company, formerly known as Columbia Care, is one of the most experienced cultivators, manufacturers and providers of cannabis products and related services, with licenses in 14 U.S. jurisdictions. The Company operates 89 facilities including 70 dispensaries and 19 cultivation and manufacturing facilities, including those under development. Columbia Care, now The Cannabist Company, is one of the original multi-state providers of cannabis in the U.S. and now delivers industry-leading products and services to both the medical and adult-use markets. In 2021, the Company launched Cannabist, its retail brand, creating a national dispensary network that leverages proprietary technology platforms. The company offers products spanning flower, edibles, oils and tablets, and manufactures popular brands including dreamt, Seed & Strain, Triple Seven, Hedy, gLeaf, Classix, Press, and Amber. For more information, please visit ************************ #ENGHP

Job Title: Quality Technician III Salary: $ Depending on experience Hours: 7:00 AM - 3:30 PM Duration: Direct Hire and Special DutiesThis position requires a minimum of 7 years of advanced inspection experience, including detailed layouts, setups, and visual inspections. Responsibilities include performing inspections for receiving, first article, first piece, in-process, final, and non-routine inspection activities on components (e.g., parts, sub-assemblies, finished goods, tooling, gages, fixtures, etc.). Additional duties may be assigned as required.Compensation & Benefits Competitive pay Medical, dental, and vision insurance Paid vacation Excusable allowance hours 401(k) retirement plan Education & Experience Requirements High school diploma or technical school equivalent with emphasis in mathematics ASQ CQT certification preferred Calibration experience preferred Experience inspecting high-precision, tight-tolerance parts in industries such as: Aerospace (ISO 9001/AS9100) Automotive (IATF 16949) Medical Device (ISO 13485) Military/Government Familiarity with both low- and high-volume production environments Compliance & Citizenship Requirements Must be a U.S. Citizen or U.S. Permanent Resident Green Card holder (ITAR compliance required) Skills & ResponsibilitiesCandidates must demonstrate proficiency in the following areas: Blueprint reading and GD&T interpretation (e.g., true position, profile of a line/surface) Interpretation of customer blueprints, material specs, and MIL-SPECs Understanding of the PPAP process Programming and operation of Vision Systems and CMMs (Starrett preferred) Proficient use of inspection tools including: Micrometers, calipers, indicators, comparators, gage pins Hardness testers, concentricity gages Surface plate setups using height gages, sine plates, v-blocks, etc. Development of inspection instructions and method setup sheets Maintenance of quality records and documentation Mentoring of Level I and II Inspectors Anticipating inspection needs, taking initiative, and escalating issues appropriately Communicating inspection deviations and generating nonconformance reports Supporting lean initiatives and continuous improvement efforts Maintaining safety, environmental, housekeeping, and documentation standards Company OverviewFounded in 2010, Top Prospect Group focuses on matching high-quality candidates with top clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology and professional services. Qualified candidates are encouraged to apply immediately! Please include a clean copy of your resume, salary expectations, and any references in your application. #INDTPGSHELTON

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to learn and subsequently operate all test equipment within the Laboratory Department Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent 1 year of manufacturing or quality experience is a plus but not required Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Working knowledge of measurement instruments: i.e., calipers, etc. Basic proficiency of Microsoft Excel and Word Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements Must demonstrate acceptable vision requirement.