Manufacturing technician jobs in Fresno, CA - 34 jobs

Manufacturing Assembler Duration: 6 months (possibly longer) Pay Rate: $18-22/hr W2 We have an opportunity for an Electrical Assembly Technician I primarily focused on Strain Gage placement and Wiring of Transducer Switches. The selected individual will have electrical/ electronics manufacturing environment with demonstrated skills in working with micro-miniature products. Preference will be given to candidates from the aerospace/ medical device manufacturing industry. Position Duties * Work under a Stereo Microscope to orient and assemble small and delicate electrical components that are sensitive to environment, process changes, and F.O.D. * Ability to position and place micro miniature parts using specialty adhesives and solder in place very fine wires using Tweezers, and small Hand Tools/Fixtures. * Solders/Welds parts by following schematic, blueprint, and Standard Work Instructions * Ensure product quality and conformance to design requirements. * Ability to reproduce the same level of quality and product functionality to deliver product consistency - this position requires a high level of dexterity, attention to detail and discipline to work diligently on repetitive tasks. * Work well under time standards to meet customer demand. * High level of commitment to process improvement and take pride in the quality of workmanship * Ability and willingness to cross-train and learn through sharing of knowledge * Perform other tasks and functions assigned by the Supervisor/ Manager from time to time. Qualifications Education & Experience: * Soldering of components to J-STD-001 and inspection per IPC-A-610 specification requirements desirable * A High School diploma, or equivalent. * Quality conscious and have good dexterity. * Demonstrated ability to read, interpret and work from drawings, controlled documentation and processes such as: layout drawings, mechanical drawings, assembly procedures/work instructions, schematics, engineering drawings, and parts lists. * 5+ years of uninterrupted electrical assembly experience using a microscope * Ensure product quality and conformance to design requirements. * Ability to work under a Microscope for extended periods of time. * Understanding of Basic Electronics. * Ability to communicate and work well in a team environment * Basic computer skills Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

The Fabrication Technician position must complete responsibilities delegated by the Fabrication & Rental manager/Foremen that include the fabrication of Skids and Maintenance of Rental boilers and related accessories. This effort involves regular contact with both internal and external parties. Our expectation is for the Fabrication Technician to be performing pressure vessel repairs, general repair of boilers, welding, pipe fitting, and other Skid buildout processes. Additionally, the Fabrication Technician will keep the scheduler of the work informed of daily work progress, maintain work areas and equipment clean and organized. Performs other related duties as required and assigned. Essential Functions The following reflects management's definition of essential functions for this job but does not restrict the tasks that may be assigned. Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasons. Must be willing to attend trainings for boiler pressure vessel welders as the schedule permits. Will keep the adequate personnel informed of ongoing tasks and problems with new and existing projects. In general will do what it takes to make our company successful with the product lines we represent and the customers we serve. It is expected that this effort will complement and result in high quality build out and repairs of Skid Projects and the repair/installation of Boiler accessories and repairs. Ability to work extended hours including nights and weekends as needed. Will understand the requirements of ASME Code repairs and its impact on estimating, inspections, welding procedures and material control. Will attend all required bi-monthly safety meetings and training as requested. Must have good communication skills and the ability to work in a team atmosphere. Must be certified in the 6G welding position and able to be certified as an employee of our company. Opening and inspection of boilers, with the understanding of the design and construction. Cleaning of the fire and watersides along with installing new gaskets. Performing refractory repairs and replacement. Capable of reading and understanding mechanical drawings. Along with the ability to make modifications to the equipment per these drawings. Capable of pipe fitting to ASME, state and local codes. Evaluate basic boiler room systems (steam and hydronic), gather information and help solve problems. Must be detail oriented in completing work orders, all required forms, summaries, and checklist daily or as required in procedures manual. Must have strong language skills as well as industry specific vocabulary. Basic mathematics, algebra, and formula knowledge are required. Must have very strong reasoning and problem solving skills. A valid driver's license is required. Must be insurable with no major infractions. Job will require some travel. Must be a team player. Must be able and willing to work the hours necessary to fulfill the needs and expectations of the position and our customers. Must have the ability to provide some ASME boiler code application support as needed on the various boilers Must display a willingness to learn, and to expand in the position. Must be very detailed in paperwork. Must have some computer skills. Other duties assigned. Competencies 1. Must have strong Communication skills 2. Proficient in communications both verbal and written 3. Interpersonal Skills 4. Safety Focus 5. Critical Thinking/Evaluation 6. Reasoning skills 7. Ethical conduct & practices 8. Time Management 9. Personal Effectiveness/Credibility 10. Flexibility 11. Timeliness 12. Initiative 13. Change Agent Requirements · One year of related experience in similar industry. · Computer knowledge a plus. · Welding & Pipefitting experience. Salary Description $45.00

Employnet is currently looking for MFG Operator in Fremont, Ca area. Pay Rate: $21.50 - $23.00 Shifts: Day Shift and Swing Shift The Manufacturing Operator is responsible for performing hands-on assembly, testing, and packaging of computer servers and related components in a high-volume production environment. This position plays a critical role in supporting the company's mission to deliver high-quality, custom-built data center hardware solutions for some of the world's leading technology companies. Key Responsibilities Assemble computer servers, racks, and subassemblies following work instructions, schematics, and quality standards. Operate manufacturing and testing equipment in accordance with established procedures. Perform visual inspections and quality checks to ensure accuracy, functionality, and adherence to specifications. Identify and report product defects or process issues to the supervisor or quality team. Maintain clean and organized workstations and follow all 5S/lean manufacturing standards. Accurately record production data, part counts, and process information in ERP or tracking systems. Follow safety procedures and participate in continuous improvement initiatives. Assist with training new operators and support team goals for productivity and quality. Qualifications Education: High school diploma or GED required. Experience: 1+ year of experience in manufacturing, assembly, or electronics production preferred. Skills: Basic understanding of mechanical and electrical assembly. Ability to read and interpret work instructions, diagrams, and BOMs. Familiarity with tools such as torque drivers, screw guns, and basic test equipment. Comfortable working in a fast-paced, team-oriented production environment. Basic computer skills for data entry and tracking. Physical Requirements Ability to lift up to 50 lbs. and stand for long periods of time. Regular use of hands, wrists, and arms for assembly tasks. Must be able to wear required PPE and comply with all safety regulations. #EmploynetJobsVisalia

**Join Our Dynamic Team at CertainTeed Insulation in Chowchilla, CA!** At CertainTeed Insulation, we take pride in our commitment to meeting customer demands through the production of top-quality products. Our manufacturing facility in Chowchilla operates 24/7, and we're on the lookout for dynamic individuals to join our team as- **_Manufacturing Associates (Inspector Packers)_** . As a Manufacturing Associate, you will play a crucial role in the production process, operating various packaging machines to create finished products. Your responsibilities will span from preparing packaging materials to conducting visual inspections, ensuring our products meet the highest standards of quality. Additionally, you'll play a key role in supporting your team during product changeovers. **_What do you bring?_** + High School Diploma or equivalent (Preferred) + Prior manufacturing experience (Preferred) + Ability to work weekends, holidays, and 12-hour shifts. + Flexibility to rotate between day shift (7:30 AM to 7:30 PM) and night shift (7:30 PM to 7:30 AM) every four (4) weeks. + Ability to read and write in English + Ability to lift up to 50 lbs. + Must be able to stand, walk, and perform repetitive tasks for long periods of time + Ability to communicate with team members and supervisors + Flexibility regarding work hours and shifts + Dependable and punctual + Commitment to following safety protocols and guidelines + Ability to troubleshoot and solve basic production related issues + Ability to adapt to changing production demands and tasks + Collaborative mindset and ability to work well in a team + Commitment to maintaining a high standard of quality in production. **_Demonstrate and Adhere to CertainTeed Values_** + An Absolute Commitment to Safety + Respect for the Environment + Dedication to Quality, Service and Customer Satisfaction + Continuous Improvement + Trust, Respect, and Integrity + Empowerment with Accountability + Teamwork and Collaboration + Progress through people - Certain states require pay information be provided in job postings. The national pay range for this position is $20.27- $24.58 per hour. However, the base pay offered may vary depending on geographic region, internal equity, job-related knowledge, skills, and experience among other factors. In addition to base salary, this position is eligible for an annual bonus. The targeted bonus amount is up to 9% of base salary based on company and individual performance measures. Saint-Gobain aims to deliver a comprehensive Total Rewards package to support our employees' well-being and help improve daily life for themselves and their families. Employees have the flexibility to choose the benefits that best needs their individual needs. Health and Wellbeing - Supporting your Wellbeing, to Thrive in Life and Work + Medical, Prescription Drug, Vision and Dental Insurance + Healthcare Saving Account and Flexible Spending Account options + LiveWell Wellness Program + Employee Assistance Program (EAP) + Paid Time Off and Paid Parental Leave Retirement and Protection - Helping to Make the Future Life You Want a Reality + 401(k) with Company Match, Retirement Accumulation Plan (RAP) Cash Balance Pension Plan + Company-provided Life Insurance, AD&D, Short-Term Disability + Voluntary employee and dependent life insurance, Long-Term Disability, Critical Illness and Accident Insurance - - Through the responsible development of innovative and sustainable building products, CertainTeed, headquartered in Malvern, Pennsylvania, has helped shape the building products industry for more than 110 years. Founded in 1904 as General Roofing Manufacturing Company, the firm's slogan "Quality Made Certain, Satisfaction Guaranteed," inspired the name CertainTeed. Today, CertainTeed is a leading North American brand of exterior and interior building products, including roofing, siding, fence, decking, railing, trim, insulation, drywall and ceilings. A subsidiary of Saint-Gobain, one of the world's largest and oldest building products companies, CertainTeed has more than 6,300 employees and more than 60 manufacturing facilities throughout the United States and Canada. ******************* - Saint-Gobain provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Saint-Gobain is an equal opportunity employer of individuals with disabilities and supports the hiring of veterans. **_What are our perks?_** We provide unique options to fit your unique lives! Our Total Rewards Program is customizable to accommodate your needs. Our menu of flexible options (*********************** includes, but is not limited to: + Excellent healthcare options: Medical, vision, prescription & dental + Family Focus & Balance: Parental leave, paid time-off and Employee Assistance Program + Financial Security: Competitive 401(k), Company-funded Retirement Accumulation Plan and Employee Stock Purchase Program (PEG) + Tuition Reimbursement: Continuing education for every season of your career + Pet Insurance options: Insurance plan & prescription discount program for your furry friends + Employee Recognition Programs + PerkSpot: Our exclusive one-stop online discount marketplace + LiveWell: Rewarding you for living a healthy lifestyle Additional Benefits - Helping Shape the Experience and Impact You Want + Group Legal + Identity Theft Protection + Auto and Home Insurance + Pet Insurance and Discounts + Back-up Child & Elder Care + PerkSpot Employee Discount Program + Group Legal + Identity Theft Protection + Auto and Home Insurance + Pet Insurance and Discounts + Back-up Child & Elder Care + PerkSpot Employee Discount Program At Saint-Gobain we design, manufacture and distribute materials which are key ingredients in the wellbeing of each of us and the future of all. Join our innovative, passionate and entrepreneurial community to improve the world of tomorrow with us.

is from 11pm to 7:30am Sunday to Thursday WHO WE ARE We are a company where people matter. We are family driven. We are financially strong. And we are looking for problem-solvers to join our growing team. BENEFITS $1.50 Shift Premium Up to 10% Retirement Contribution $600 per Year Wellness Incentive Two Weeks Starting Paid Time Off Medical, Dental, and Vision - Eligible f irst day of the month following hire date. JOIN A TOP WORKPLACE - ******************************************* Night Shift Production Operator The primary purpose of this position is to Food Processing and Ingredient liquid product manufacturing, blending and packaging. Primary responsibilities include: Blending and packaging of liquid chemicals in a GMP environment. Inspection, cleaning, and filling of drums and totes. Loading and unloading of tank trucks and railcars. Drawing samples of incoming product and finish blends and compounds. Cleaning and inspection of blenders and reactors. Careful review of worksheets. Operation of machinery as directed by supervisor. Attend all mandatory training. Complete all paperwork accurately, neatly, and according to SOP by the end of each shift. All staff members are responsible for reporting food safety problems to their supervisor or the SQF Practitioner upon observation of a known or potential issue. Uphold Hydrite's Standard of Excellence through a continuous commitment to maintain quality facilities and provide quality products and services to internal and external customers Perform all duties outlined in relevant SOPs and all other duties to be assigned. Participate in RCRA, regulatory, health & safety and process training activities as required. Review changes/additions with your supervisor. Must be RCRA compliant Works with other staff members to maintain workload balances. Provides back-up support, as necessary. Supports effective communication with all Hydrite departments where responsibilities overlap to ensure success of the branch team. REPORTING STRUCTURE This position reports to the Production Supervisor. PREFERRED EXPERIENCE Ability to follow instructions. Ability to work independently. Prior food processing product chemical blending experience recommended. Must have communication and interpersonal skills, along with the ability to read, write, and speak English. ADDITIONAL BENEFITS Benefits and perks include 401k and profit sharing, medical/dental/vision/life insurance, paid time off, tuition reimbursement, adoption assistance, legal services insurance, scholarship awards for children of employees, summer picnic, community giving events, free family wellness coaching including nutritionist and fitness coach. WANT TO STAY CONNECTED? FIND US ON SOCIAL MEDIA LinkedIn: linkedin.com/company/hydrite-chemical-co- Facebook: facebook.com/hydrite YouTube:******************************************* Learn more about Hydrite on our website: *********************** Privacy Notice for California Residents: ************************************************************** California pay range$23-$25 USD

Start a new career with us - $3,000 new hire incentive! Benefits start day 1 - No waiting period! Taylor Corporation is a growing, dynamic company with big plans for the future ― and our people. Family owned and proud of it, we power our employees' potential and strive to create opportunity and security for every member of the team. We're passionate about our work, we believe there is always a better way, and we're in this for the long haul. Ready to build a career? It's time to look at Taylor. Your Opportunity: Taylor Corporation is looking for a Press / Print Operating Technician to join our team! Your Responsibilities: • Carry out accurately and precisely detailed instructions from job orders. Identify possible errors or problems and take prompt action to correct. • Set up/adjust press for job runs to meet specifications. • Monitor product for quality during job runs. Check preciseness of detail against specifications. Take action to correct any problems. • Monitor equipment during job runs. Remain alert to mechanical problems and refer as necessary to maintenance. • Initiate the start up and running of jobs in keeping with production schedule. • Perform routine equipment maintenance and upkeep. • Meet standards for output, waste, and spoilage. • Adhere to all safety guidelines. Keep workspace clean and organized for efficiency in shift changeovers. • Complete with accuracy related logs and paperwork. Your Shift: • Monday - Friday 2:30pm-11:00pm You Must Have: • Mechanical and technical skills/aptitude • Basic math skills to read ruler and calculate label dimensions for stock optimization • Ability to operate equipment to obtain proficiency as measured through production and quality standards • Ability to understand verbal and written instructions for work orders • Ability to communicate professionally • Strong attention to detail Requirements Within This Position: • Ability to communicate and exchange accurate information and ideas so others will understand • Regularly required to remain in a stationary position • Constantly operates machinery and handles products including print materials • Frequently required to move inside the facility • Regularly move up to 25+ pounds (lift, push, pull and/or carry) We Would Also Prefer: • Ability to distinguish colors • Experience in a production related environment The anticipated hourly range for this position is $22.00 - $26.00. The actual base offered depends on a variety of factors, which may include as applicable, the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. The range listed is just one component of Taylor Corporation's total compensation and benefits package for employee. About Taylor Corporation One of the largest print and communications firms in North America, Taylor's family of companies provides a diverse set of products, services and technologies that address the toughest business challenges. We work diligently each day to create printed and digital marketing communication solutions that help power many of the world's most recognizable brands. With more than 50 years of category expertise and 10,000 employees spanning dozens of U.S. states and multiple countries, Taylor serves businesses and distributors both large and small. Our employees enjoy a comprehensive benefit package including a choice of several health plans, dental, vision, wellness programs, life and disability coverage, flexible spending accounts, health savings accounts, a 401(k) plan with company match, paid time off (PTO) and 64 hours of annual holiday pay. The Employer retains the right to change or assign other duties to this position. Taylor Corporation is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Taylor Corporation including all partners and affiliates is an Equal Opportunity Employer/Veterans/Disabled.

Serpa Packaging Solutions is seeking a Mechanical Assembly Technician to join our team! As the As a Mechanical Assembly Technician II, you will use a hands-on approach to perform assembly, maintenance, and troubleshooting of high-quality industrial machinery in a manufacturing facility. This individual must be able to complete work accurately, meet project milestone dates, and have effective communication skills. Great work culture, working environment, career growth opportunities! If this sounds like you, we want to connect! Requirements: Read and follow mechanical assembly drawings and schematics, layout drawings and bills of material. Align, fit, assemble, connect, and install system components, using jigs, fixtures, measuring instruments, hand tools, and power tools. Adjust, repair, rework, or replace parts and assemblies to eliminate malfunctions and to ensure proper operation. Under direction, may perform some basic electrical repairs and troubleshooting. Understand and meet company quality standards and objectives to fulfill customers' needs. Desired Requirements: Minimum 3-4 years of mechanical/maintenance experience, preferably in assembly Experience working with mechanical assembly projects desired Maintenance experience in Auto/Diesel, Mechanical Service, and/or Fabrication desired Strong mechanical aptitude Blueprint and mechanical schematic reading capabilities Ability to perform job duties that may require standing, kneeling, crouching, twisting upper body, and working in cramped spaces Ability to lift light and heavy weight supplies and materials up to 40 pounds Reliability and punctuality are required What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matter. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay, potential short-term incentive opportunities, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Base Salary Range: $20.00 - $26.00 If this sounds like you, we want to connect! Serpa has a track record of 38 years of strong economy proof Industries. We are known for our high quality and customized end-of-the-line machinery. Packaging Industries Markets: Pharmaceuticals Food & Beverage Household Tobacco Pet Food Dairy ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #SERPA

Requirements Knowledge, Skills, and Abilities: Experience with Microsoft Word, Excel and PowerPoint, A proven track record of exceptional organizational, planning and overall time management skills in addition to exceptional verbal and written communication, A comprehensive understanding of the core competencies of Lyons' manufacturing capabilities and proprietary product development. Education: High School Diploma with 1-3 years' experience in a laboratory environment, preferably one in food manufacturing. Additional course work in (Biology, Chemistry, Food Science) or related discipline a plus. Other Requirements: Ability to follow directions. Ability to work independently with limited supervision. Detail oriented with the ability to maintain accurate and legible documentation Additional Information Our compensation program is designed to attract, motivate, and retain the very best people. Lyons Magnus offers a comprehensive benefits plan that include: Health, Dental Insurance, Life Insurance, Long Term Disability, Sec. 125, 401(k) plan, and more. If you meet these requirements and are eager to join a dynamic company poised for further growth, please respond with your cover letter, and salary requirements. To learn more about Lyons Magnus, LLC its products and core values, visit ******************* or follow us on Instagram or LinkedIn Lyons Magnus is an Equal Opportunity Employer and with opportunities for advancement. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, protected veteran status, or other protected categories. *This organization participates in E-Verify. Salary Description $16.50 -$ 17.34/ Per hour

For over 100 years, BlueScope continues to build on our reputation of quality brands and products, leading technology and a customer-first spirit. Through our global brands, we are one of the largest manufacturers of building solutions in the world. Our diverse, bright and inspired workforce is committed to bettering the communities we serve through breakthrough thinking and innovations. Your goals, ideas and perspective can help shape our future - we look forward to hearing them! Join Our Team as an Engineering Technician! We're seeking a detail-oriented and technically skilled individual to support our engineering team in developing precise drawings and models for structural projects. As a Structural Detailer, you'll play a key role in translating engineering designs into accurate construction documents, ensuring clarity, efficiency, and compliance with industry standards. Whether you have years of experience or are eager to grow in a collaborative environment, we welcome candidates who are passionate about bringing structural designs to life. Join us in shaping the built environment with precision and innovation! BlueScope Buildings North America's Engineering department delivers safe, innovative, and high-quality structural and construction engineering solutions. We prioritize cost efficiency while supporting both internal teams-including manufacturing, project management, and field erection-and external customers with exceptional service. What We Offer * Inclusive Culture: A welcoming, equitable environment where diverse perspectives and experiences are valued. * Growth Opportunities: Access to professional development, leadership training, and career advancement. * Collaborative Team: Join a team that values mutual respect, trust, and teamwork. * Competitive Benefits: A comprehensive benefits package, flexible work options, and a focus on work-life balance. If you're ready to make an impact, we want to hear from you! What You'll Do The Engineering Technician performs Detailing activities on assigned projects and adheres to schedule and accuracy requirements. * Prepare detailed drawings and fabrication plans based on engineering designs and project specifications. * Create erection drawings, approval drawings, permit drawings, and anchor rod layouts. * Continuously develop technical expertise and improve knowledge of products, materials, and industry standards. * Upload, edit, and release parts into the manufacturing system for production. * Work closely with project teams to identify challenges, propose solutions, and ensure cost-effective, efficient project execution. * Maintain project schedules to meet customer needs and ensure high-quality service. * Contribute to department objectives, profitability goals, and continuous improvement as part of a high-performance team. What We're Looking For: We value problem-solvers with strong technical and communication skills who thrive in a collaborative environment. You'll be a great fit if you: * Associate or 2-year technical degree or 2 additional years of relevant experience We welcome candidates with diverse backgrounds and experiences who are eager to grow, innovate, and contribute to our team's success. Notice to External Search Firms: BlueScope Buildings does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. BlueScope Buildings Talent Acquisition engages with search firms directly for hiring needs. Pay Range: $48,000-$72,500 Additional Information The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

Now hiring Gerawan employees/ Ahora estamos contratando empleados de Gerawan. Job Purpose: Support, maintain and control Food Safety and Quality Assurance program. Complies with standard operating procedures, USDA regulations, company procedures and policies and HACCP activities Assist QA Manager in completing daily tasks and audits. Report any problems or issues to the QA Manager immediately Adjusts or corrects process to meet Quality Assurance standards Record keeping in accordance with governing agencies Assist in handling QA related matters Ensure all labeling for all products are compliant before and during production Promote and follow safety in the workplace Accountable for setting up sampling and testing of product. Responsible for submitting results Performs other duties as required Other duties, will be assigned Qualifications and Skills Required: Bilingual (Spanish/English) Ability to work well in a team-based environment with limited supervision Ability to work in a fast paced environment Proficiency with basic computer skills, including e-mail, Microsoft Office Pay Range ($16.90 min - $17.15 max)/hour This position may encompass other duties than the specified duties listed above. If necessary, alternative duties can be assigned at the discretion of the direct supervisor.

From tree to table, POM Wonderful delivers a whole lot of healthy. Known for our iconic double-bubble bottle, we grow, harvest, package, and market fresh pomegranates, pomegranate arils, and a selection of delicious pomegranate-blended juices and teas. With over 9,000 acres in California's Central Valley, POM Wonderful is committed to unleashing the antioxidant power of our handpicked pomegranates. The Reliability Technician III is responsible for keeping the production equipment operating at its fullest and safe operating capacity, performing, and repairing any problems as they are discovered before they have a chance to worsen, but not limited to overseeing, maintaining, performing tooling changes and setup. Installation and repair of electrical, plumbing, pneumatic, mechanical, hydraulic, and other production/processing equipment. They may be responsible for evaluating problematic systems or facilities and determining what installation or repair services need to be performed. They may be assigned to the Plastics, Serac, Extraction, Fresh or Arils Department depending on the need or opening. All these departments are part of the Reliability Department. Compensation Range: $36.00-$42.00 hourly Job Description Ensure all company and OSHA safety programs are followed. Ensure all GMP policies and Food safety procedures are followed. Ensure all required GFSI, FDA, USDA, FSMA, Third Party Audit, and company procedures and policies related to food safety are followed. Inspects work for completeness. Informs supervisor when job assignments / PM are complete and ready for inspection. Determines material, equipment, and supplies to be used. Transfers equipment from one project to another as necessary. Keeps routine records and PM records up to date. Installs, inspects, repairs and maintains the electrical, plumbing, mechanical, pneumatic, hydraulic, and other related systems in Reliability department. Inspects major contract work on mechanical and other related systems and assists when necessary in order to understand all new installations or changes. Performs other duties as assigned. Qualifications Ability to perform all mechanic I & II skills & abilities with minimal to no supervision. Extensive understanding towards “Theory of operations” for surrounding production equipment. Ability to proficiently troubleshoot when production equipment breakdown events occur. Ability to perform all PM's or work requests generated for the Reliability department with minimal supervision. Ability to generate value added work requests through performing Up Time Inspections utilizing ultra-sonic devices and other external tools to Identify premature failures of production equipment. EDUCATION & EXPERIENCE: High School or GED or related technical field. At least two years of education and training beyond high school level in general maintenance and repair, or a closely related area. 5 years' experience in maintenance operations including two years in a supervisory or lead capacity. Additional Information Access to a fully equipped On-site Gym On-site subsidized Cafe Opportunities for development and internal mobility Manager and leadership training, biweekly L&OD webinars, and eLearning offerings Companywide problem solving and continuous improvement training Company focus on wellness and health Check out our newest solar farm! ************************************************************ POM Wonderful is the largest grower and producer of fresh pomegranates and pomegranate juice in the United States as well as the worldwide leader in fresh California pomegranates and pomegranate-based products including our 100% pomegranate juices, healthy juice blends and teas. We grow, handpick and juice our own pomegranates to ensure the highest quality. POM Wonderful is part of The Wonderful Company, a privately held $5 billion company, which also has other No. 1 brands such as Wonderful Pistachios, FIJI Water, Wonderful Halos , JUSTIN Wine, and Teleflora . To learn more about The Wonderful Company, visit ****************** or follow us on Facebook, Twitter and Instagram. To view the current Corporate Social Responsibility report, visit ********************** The Wonderful Company is proud to be an Equal Opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex, sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. EEO is the law - click here for more information EEO is the law - click here for more information

General Industrial Maintenance Technician - Central Valley, CA Apply through Talent Connection to stand out from other applicants. We are partnering with a well-established manufacturing company in the Central Valley that operates multiple large-scale processing, packaging, and production lines. This organization prides itself on safety, quality, and long-term employee development. The Industrial Maintenance Technician will assist with preventive maintenance, troubleshooting, and repair of equipment across the facility. This role is ideal for someone who enjoys hands-on mechanical and electrical work in a fast-paced production environment. Job Description Responsibilities Perform preventive and predictive maintenance on production, processing, and packaging equipment. Assist with equipment disassembly, assembly, and general mechanical tasks. Diagnose issues on motors, pumps, industrial bearings, hydraulics, lubrication systems, and electrical components. Read and interpret schematics, prints, and technical documentation. Conduct daily equipment startup and monitor gauges, instrumentation, and system performance. Inspect equipment to identify potential issues before failures occur. Maintain an organized, clean maintenance shop and workspace. Perform routine facility repairs as needed. Follow all safety, sanitation, QA, and facility policies. Maintain reliable and punctual attendance. Perform additional duties as assigned. Qualifications Qualifications High School diploma or GED required. 6 months+ industrial maintenance experience preferred (or equivalent training/education). Ability to read and interpret maintenance procedures, safety documents, and equipment manuals. Strong communication skills with the ability to write basic reports and collaborate with teams. Comfortable working with measurements, basic algebra, geometry, and troubleshooting logic. Ability to interpret technical instructions, diagrams, and schematics. Preferred: SACA certification(s). Additional Information 🚀 Career Growth This role offers long-term advancement within maintenance, controls, or supervisory tracks for strong performers. Company invests in ongoing technical training and certifications. 📅 Schedule 2nd and 3rd shift options available. Consistent full-time hours. 💼 Work Environment Clean, highly regulated food-production environment. Strong focus on safety, preventive maintenance, and teamwork. 🔧 Tools & Equipment State-of-the-art production and packaging equipment. 🎯 Ideal Candidate Someone who enjoys troubleshooting, solving electrical issues, and working independently. Comfortable in a fast-paced production/manufacturing setting. 📝 Hiring Process 2-3 step interview process. Skills assessment may be required depending on experience. Quick client feedback once submitted. 🔒 Through Talent Connection Talent Connection handles all screenings, interview scheduling, and fast submissions. We advocate for you directly to hiring leadership so your resume doesn't get lost in the system. 💲 Referral Bonus $500 referral bonus for successful hires

* Branch Details Local food processing plant in Fresno, CA is now hiring a Quality Technician. Temp-to-hire opportunity! Pay: $17.00 or more depending on experience Schedule: Varies and days off may be during week days. Over time may be required. Job Duties may include but not limited to the following: Support production operations to ensure food safety and product quality Perform and document Pre-Op and Post-Op inspections of equipment and facilities Conduct Brix and pH tests on products; record all results accurately Notify supervisor of any products outside specifications Visually inspect finished goods and maintain product retain samples Verify traceability and labeling information (lot and batch codes) Requirements: Able to operate lab equipment and accurately record data Able to lift and move 30 lb. repetitively throughout the entire shift Call or visit us for more information: 7429 N First St. STE 103, Fresno, CA 559-514-6980 #FresnoBranchCA Fresno CA 3000

USC Auxiliary Services, one of the largest divisions at The University of Southern California, is focused on making a difference for over 65,000 students, athletes, faculty, staff, and guests who visit our campuses each day. Through our innovative services, our six central business units (USC Bookstores, USC Hospitality, USC Housing, USC Transportation, the USC Hotel and the Los Angeles Memorial Coliseum) collectively create the best USC experience for future leaders, scientists, filmmakers, engineers, and doctors alike. Auxiliary Services works tirelessly to welcome all visitors into the Trojan family. We are driven to succeed by our commitment to uphold our unifying values. The city of Los Angeles boasts endless attractions and tourist destinations. Amongst all of the sights and sounds, the USC Hotel offers a modern and convenient place to unwind, with 240 spacious, comfortable guest rooms and over 15,000 square feet of flexible event space. Owned and operated by the University of Southern California, and the site of a recent multi-million dollar renovation, the hotel features luxurious fabrics and artwork depicting the storied traditions of USC. Additional renovations, which include the restaurants and kitchens, are in the planning stage. We are seeking an Engineering Technician, USC Hotel, to join our rapidly growing team. Position Overview: The Engineering Technician supports the Chief Engineer in the daily operation and maintenance of the hotel's physical infrastructure. This role requires a journeyman-level background with skilled trades (such as electrical, plumbing, HVAC, or mechanical systems) and a strong working knowledge of building operations. The Engineering Technician ensures that all mechanical, electrical, plumbing, and life safety systems function efficiently, safely, and in compliance with applicable codes and standards. Responsibilities include troubleshooting MEP issues, performing routine inspections, and assisting with preventive maintenance programs. This position plays a key role in maintaining a comfortable, safe, and well-functioning environment for guests and staff. The Accountabilities: Assist in the daily operations of the engineering department, coordinating the repair and maintenance of all mechanical, electrical, HVAC, and plumbing systems. Ensure prompt response to all service requests, including urgent or emergency situations. Perform preventive maintenance and repairs on commercial freezers, walk-in refrigerators, package units, heat pumps, swamp coolers, boilers, and pumps; utilize journeyman-level trade skills to diagnose and service both low and high voltage electrical systems, with a solid understanding of controls and troubleshooting techniques. Respond to urgent guest or operational issues and be available to report on-site during emergencies such as power outages, major plumbing leaks, or equipment failures to support operational continuity. Utilize the hotel's preventive maintenance system to schedule, execute, and track routine maintenance tasks, ensuring the longevity and efficiency of all hotel equipment and infrastructure. Maintain detailed and accurate logs of all completed work. Support the ongoing development of the asset management database and assist in establishing a robust inventory accounting system under the direction of the Chief Engineer. Ensure the engineering department's compliance with all local, state, and federal safety codes and building regulations; conduct routine safety inspections and assist the Chief Engineer with the development and implementation of emergency preparedness plans. Collaborate with other departments to promptly resolve guest issues and maintain a high standard of service. Provide technical support for capital improvement projects and coordinate with vendors and contractors under the direction of the Chief Engineer. Provides general maintenance and repairs for facilities and equipment (e.g., air conditioners, heaters, appliances, furniture, pumps, copiers, cooling towers video equipment, door locks, cabinets, sinks, etc.), which may include electrical, carpentry, painting, plumbing and locksmith services. Performs installation work and on-going preventive maintenance. Resolves problems and follows through on work order requests. Maintains logs of facilities and equipment maintenance, repairs and/or requests. Communicates status of work orders to appropriate staff. Provides technical management services for telecommunications equipment repairs and access. Coordinates installation, removal and repairs. Implements software and hardware changes. Maintains equipment inventory, calling card account log and access privileges. Provides staff training on telephones and voicemail. Maintains facilities' main security accesses. Orders and maintains keys. Coordinates locksmith services. Oversees routine maintenance inspections of facilities for deficiencies, health and safety hazards, and/or code violations. Maintains on-site storage areas. Provides units with adequate space. Implements security related procedures and ensures security measures are in place. Oversees facility maintenance staff and/or student workers as assigned. Monitors and follows-up on the status of work order requests to ensure assignments are completed properly and within established timeframe. Assists with special projects as needed or required. Oversees facilities services in the absence of facilities manager. Performs other related duties as assigned or requested. The University reserves the right to add or change duties at any time. Minimum Qualifications: Education: High School or equivalent. Combined experience/education as substitute for minimum education. Experience: Minimum of 3-5 years of progressive experience in hotel engineering, facilities maintenance, HVAC/R, or a related trade field. Experience in general maintenance and repair for carpentry, electrical, plumbing, locksmith, painting, mechanics and engineering (e.g., air conditioning, heating, and refrigeration systems) trades. Knowledge of telecommunications software and hardware. Preferred Qualifications: Bachelor's degree. Specialized/Technical training Additional Information: No set schedule. May be required to work weekends, evenings and/or holidays. Must have full availability to support the needs of the business. The Trojan Family Rewards: We pride ourselves in creating the BEST USC EXPERIENCE , and that begins with our employees! We offer a wide variety of benefits and programs that support our staff and their families. For more information, please visit ****************************************** This support advocates work-life balance and employee well-being. As members of the Trojan family, employees are connected by the traditions and history that make us proud to be Trojans! The work culture thrives on mutual respect, trust and synergy amongst all of its members. USC has great minds that transform the world with their talents and research. Will you be one? Join us! FIGHT ON! The hourly rate for this position is $30.00. When determining an offer, the University of Southern California considers factors such as the scope and responsibilities of the role, the candidate's experience, education, training, key skills, internal peer alignment, applicable laws, contractual requirements, grant funding, and market conditions. Minimum Education: Specialized/technical training, Combined experience/education as substitute for minimum education Minimum Experience: 6 - 12 months Minimum Field of Expertise: Knowledge of thermodynamic laws, refrigerator cycles, electricity principles, test/detection instruments, hand/power tools, wood finishing, AC/DC currents, wiring, painting, construction and plumbing USC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other characteristic protected by law or USC policy. USC observes affirmative action obligations consistent with state and federal law. USC will consider for employment all qualified applicants with criminal records in a manner consistent with applicable laws and regulations, including the Los Angeles County Fair Chance Ordinance for employers and the Fair Chance Initiative for Hiring Ordinance, and with due consideration for patient and student safety. Please refer to the Background Screening Policy Appendix D for specific employment screen implications for the position for which you are applying. We provide reasonable accommodations to applicants and employees with disabilities. Applicants with questions about access or requiring a reasonable accommodation for any part of the application or hiring process should contact USC Human Resources by phone at **************, or by email at *************. Inquiries will be treated as confidential to the extent permitted by law. Notice of Non-discrimination Employment Equity Read USC's Clery Act Annual Security Report USC is a smoke-free environment Digital Accessibility If you are a current USC employee, please apply to this USC job posting in Workday by copying and pasting this link into your browser: *************************************************************

Serpa Packaging Solutions is seeking a Mechanical Assembly Technician to join our team! As the As a Mechanical Assembly Technician II, you will use a hands-on approach to perform assembly, maintenance, and troubleshooting of high-quality industrial machinery in a manufacturing facility. This individual must be able to complete work accurately, meet project milestone dates, and have effective communication skills. Great work culture, working environment, career growth opportunities! If this sounds like you, we want to connect! Requirements: * Read and follow mechanical assembly drawings and schematics, layout drawings and bills of material. * Align, fit, assemble, connect, and install system components, using jigs, fixtures, measuring instruments, hand tools, and power tools. * Adjust, repair, rework, or replace parts and assemblies to eliminate malfunctions and to ensure proper operation. * Under direction, may perform some basic electrical repairs and troubleshooting. * Understand and meet company quality standards and objectives to fulfill customers' needs. Desired Requirements: * Minimum 3-4 years of mechanical/maintenance experience, preferably in assembly * Experience working with mechanical assembly projects desired * Maintenance experience in Auto/Diesel, Mechanical Service, and/or Fabrication desired * Strong mechanical aptitude * Blueprint and mechanical schematic reading capabilities * Ability to perform job duties that may require standing, kneeling, crouching, twisting upper body, and working in cramped spaces * Ability to lift light and heavy weight supplies and materials up to 40 pounds * Reliability and punctuality are required What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matter. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay, potential short-term incentive opportunities, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Base Salary Range: $20.00 - $26.00 If this sounds like you, we want to connect! Serpa has a track record of 38 years of strong economy proof Industries. We are known for our high quality and customized end-of-the-line machinery. Packaging Industries Markets: * Pharmaceuticals * Food & Beverage * Household * Tobacco * Pet Food * Dairy ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #SERPA

Now Hiring in Fresno, CA. Pay Rate: $19.00 Job Requirements: The QA Receiving Technician will be responsible for inspection and reporting of all incoming raw and packaging materials. Essential Job Responsibilities: Inspect and report all incoming raw and packaging materials. Complete all required inspection documents for incoming raw and packaging materials. Ensure all incoming raw and packaging materials have the current required food safety/quality assurance documents from suppliers on file. Review, file, and maintain all receiving documents (electronic and hard copies of COAs, BOLs, Specifications, Inspection forms, etc.) Assist in mock recalls and facility audits. Place non-compliant raw and packaging materials on hold status and review with QA Management. Release raw and packaging materials from hold status when authorized. Label Verification. Temperature monitoring & verification in cold storage areas. Track shelf life of ingredients and process shelf-life extensions. Perform other duties as assigned or required. Education and Experience: 2 years of experience in a Quality Assurance Technician role 2 years of food industry experience Experience in food quality control or related field preferred Familiarity with HACCP, GMP and statistical analysis preferred Forklift certification preferred. Work Environment and Physical Demands: Ability to work in a fast-paced work environment Follow standardized work and adhere to safe work practices. Must be able to lift up to 50 lbs., stand on feet for prolonged periods of time and climb stairs as needed Equipment noise is elevated, requiring the use of hearing protection Seasonal temperatures can be expected Must wear and use all protective and safety equipment as directed by the Company #EmploynetJobsFresno

Job Description Now hiring Gerawan employees/ Ahora estamos contratando empleados de Gerawan. Job Purpose: Support, maintain and control Food Safety and Quality Assurance program. Complies with standard operating procedures, USDA regulations, company procedures and policies and HACCP activities Assist QA Manager in completing daily tasks and audits. Report any problems or issues to the QA Manager immediately Adjusts or corrects process to meet Quality Assurance standards Record keeping in accordance with governing agencies Assist in handling QA related matters Ensure all labeling for all products are compliant before and during production Promote and follow safety in the workplace Accountable for setting up sampling and testing of product. Responsible for submitting results Performs other duties as required Other duties, will be assigned Qualifications and Skills Required: Bilingual (Spanish/English) Ability to work well in a team-based environment with limited supervision Ability to work in a fast paced environment Proficiency with basic computer skills, including e-mail, Microsoft Office Pay Range ($16.90 min - $17.15 max)/hour This position may encompass other duties than the specified duties listed above. If necessary, alternative duties can be assigned at the discretion of the direct supervisor. Powered by JazzHR wa W7bEAM8n

From tree to table, POM Wonderful delivers a whole lot of healthy. Known for our iconic double-bubble bottle, we grow, harvest, package, and market fresh pomegranates, pomegranate arils, and a selection of delicious pomegranate-blended juices and teas. With over 9,000 acres in California's Central Valley, POM Wonderful is committed to unleashing the antioxidant power of our handpicked pomegranates. The Reliability Technician III is responsible for keeping the production equipment operating at its fullest and safe operating capacity, performing, and repairing any problems as they are discovered before they have a chance to worsen, but not limited to overseeing, maintaining, performing tooling changes and setup. Installation and repair of electrical, plumbing, pneumatic, mechanical, hydraulic, and other production/processing equipment. They may be responsible for evaluating problematic systems or facilities and determining what installation or repair services need to be performed. They may be assigned to the Plastics, Serac, Extraction, Fresh or Arils Department depending on the need or opening. All these departments are part of the Reliability Department. Compensation Range: $36.00-$42.00 hourly Job Description Ensure all company and OSHA safety programs are followed. Ensure all GMP policies and Food safety procedures are followed. Ensure all required GFSI, FDA, USDA, FSMA, Third Party Audit, and company procedures and policies related to food safety are followed. Inspects work for completeness. Informs supervisor when job assignments / PM are complete and ready for inspection. Determines material, equipment, and supplies to be used. Transfers equipment from one project to another as necessary. Keeps routine records and PM records up to date. Installs, inspects, repairs and maintains the electrical, plumbing, mechanical, pneumatic, hydraulic, and other related systems in Reliability department. Inspects major contract work on mechanical and other related systems and assists when necessary in order to understand all new installations or changes. Performs other duties as assigned. Qualifications Ability to perform all mechanic I & II skills & abilities with minimal to no supervision. Extensive understanding towards “Theory of operations” for surrounding production equipment. Ability to proficiently troubleshoot when production equipment breakdown events occur. Ability to perform all PM's or work requests generated for the Reliability department with minimal supervision. Ability to generate value added work requests through performing Up Time Inspections utilizing ultra-sonic devices and other external tools to Identify premature failures of production equipment. EDUCATION & EXPERIENCE: High School or GED or related technical field. At least two years of education and training beyond high school level in general maintenance and repair, or a closely related area. 5 years' experience in maintenance operations including two years in a supervisory or lead capacity. Additional Information Access to a fully equipped On-site Gym On-site subsidized Cafe Opportunities for development and internal mobility Manager and leadership training, biweekly L&OD webinars, and eLearning offerings Companywide problem solving and continuous improvement training Company focus on wellness and health Check out our newest solar farm! ************************************************************ POM Wonderful is the largest grower and producer of fresh pomegranates and pomegranate juice in the United States as well as the worldwide leader in fresh California pomegranates and pomegranate-based products including our 100% pomegranate juices, healthy juice blends and teas. We grow, handpick and juice our own pomegranates to ensure the highest quality. POM Wonderful is part of The Wonderful Company, a privately held $5 billion company, which also has other No. 1 brands such as Wonderful Pistachios, FIJI Water, Wonderful Halos , JUSTIN Wine, and Teleflora . To learn more about The Wonderful Company, visit ****************** or follow us on Facebook, Twitter and Instagram. To view the current Corporate Social Responsibility report, visit ********************** The Wonderful Company is proud to be an Equal Opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex, sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. EEO is the law - click here for more information EEO is the law - click here for more information

General Industrial Maintenance Technician - Central Valley, CA Apply through Talent Connection to stand out from other applicants. We are partnering with a well-established manufacturing company in the Central Valley that operates multiple large-scale processing, packaging, and production lines. This organization prides itself on safety, quality, and long-term employee development. The Industrial Maintenance Technician will assist with preventive maintenance, troubleshooting, and repair of equipment across the facility. This role is ideal for someone who enjoys hands-on mechanical and electrical work in a fast-paced production environment. Job Description Responsibilities Perform preventive and predictive maintenance on production, processing, and packaging equipment. Assist with equipment disassembly, assembly, and general mechanical tasks. Diagnose issues on motors, pumps, industrial bearings, hydraulics, lubrication systems, and electrical components. Read and interpret schematics, prints, and technical documentation. Conduct daily equipment startup and monitor gauges, instrumentation, and system performance. Inspect equipment to identify potential issues before failures occur. Maintain an organized, clean maintenance shop and workspace. Perform routine facility repairs as needed. Follow all safety, sanitation, QA, and facility policies. Maintain reliable and punctual attendance. Perform additional duties as assigned. Qualifications Qualifications High School diploma or GED required. 6 months+ industrial maintenance experience preferred (or equivalent training/education). Ability to read and interpret maintenance procedures, safety documents, and equipment manuals. Strong communication skills with the ability to write basic reports and collaborate with teams. Comfortable working with measurements, basic algebra, geometry, and troubleshooting logic. Ability to interpret technical instructions, diagrams, and schematics. Preferred: SACA certification(s). Additional Information Career Growth This role offers long-term advancement within maintenance, controls, or supervisory tracks for strong performers. Company invests in ongoing technical training and certifications. Schedule 2nd and 3rd shift options available. Consistent full-time hours. Work Environment Clean, highly regulated food-production environment. Strong focus on safety, preventive maintenance, and teamwork. Tools & Equipment State-of-the-art production and packaging equipment. Ideal Candidate Someone who enjoys troubleshooting, solving electrical issues, and working independently. Comfortable in a fast-paced production/manufacturing setting. Hiring Process 2-3 step interview process. Skills assessment may be required depending on experience. Quick client feedback once submitted. Through Talent Connection Talent Connection handles all screenings, interview scheduling, and fast submissions. We advocate for you directly to hiring leadership so your resume doesn't get lost in the system. Referral Bonus $500 referral bonus for successful hires