Manufacturing technician jobs in Greeley, CO - 232 jobs

The Manufacturing Technician supports daily production of dietary supplement products, including equipment operation, process monitoring, and quality assurance under cGMP guidelines. You will troubleshoot equipment and process issues, perform routine cleaning and changeovers, assist with batch record documentation, and uphold safety, sanitation, and regulatory requirements specific to dietary supplements. Responsibilities Support daily production runs: monitor equipment, assist with setup/changeovers, and ensure production targets are met while adhering to quality and safety standards for dietary supplements. Operate and troubleshoot processing equipment as assigned; perform routine cleaning, calibration checks, adjustments, and basic preventive maintenance to maintain optimum performance. Verify product quality and process parameters; document observations, deviations, and corrective actions in compliance with batch records and SOPs. Follow batch records, SOPs, sanitation procedures, and line clearance; ensure proper material reconciliation and traceability of all finished products. Maintain accurate production documentation, including lot codes, run times, temperatures, humidity (if applicable), and changeover records. Ensure proper labeling, packaging integrity, and traceability of finished goods; confirm correct lot codes and expiration dating where applicable. Support cGMP compliance and safety programs; promote a clean and safe work environment; report any food-safety or product-safety concerns. Monitor line performance metrics (OEE, yield, scrap, downtime, changeover times) and implement improvements to optimize throughput while maintaining quality. Coordinate with QA, Quality Systems, Maintenance, Supply Chain, and Production Planning to resolve issues and optimize throughput within regulatory requirements. Contribute to continuous improvement initiatives (kaizen, lean) to reduce downtime, optimize changeovers, and minimize waste. Participate in safety briefings, risk assessments, and incident investigations; support corrective actions and preventive actions (CAPA) as needed. Assist with training of new technicians and operators on equipment operation, standard work, and quality requirements. Maintain inventory accuracy for packaging materials, labels, raw materials, and finished goods. Skills/Qualification Education: High school diploma or equivalent; technical diploma or associate degree in manufacturing, packaging, food science, or related field preferred. Experience: 2-5 years in food packaging operations or manufacturing; supervisory or team-leading experience preferred. Knowledge: Strong understanding of food packaging processes, labeling, serialization/traceability, allergen controls, and line clearance procedures; familiarity with GMP, HACCP, SQF/ISO 22000 or other food safety standards. Technical: Proficiency with packaging equipment (cartoners, case packers, printers/labelers, shrink wrap); basic PLC/SCADA understanding is a plus. Quality & Compliance: Excellent attention to detail; ability to interpret SOPs, batch records, allergen controls, and quality specifications. Problem Solving: Effective root-cause analysis and troubleshooting skills; able to identify food safety risks and implement mitigations. Communication: Strong verbal and written communication; ability to coach and mentor teammates; clear documentation of deviations and corrective actions. Safety: Commitment to a safe work environment; knowledge of and adherence to safety protocols; forklift certification often preferred. Math / Numeracy: Proficient in basic arithmetic (addition, subtraction) and comfortable performing simple calculations for batch yields, ingredient weights, batch scaling, and ingredient-to-batch conversions; ability to work with decimals and percentages accurately. Desired Skills/Qualification HACCP Certification or Food Safety Certification SQF/ISO 22000 awareness or certification OSHA/Safety training Allergen Control training Forklift certification Physical Requirements Ability to stand for extended periods; ability to lift/move up to 50 lbs as required by packaging operations. Ability to work in a manufacturing environment with noise, varying temperatures, and exposure to cleaning chemicals and food ingredients. Occasional bending, kneeling, and reaching; ability to operate hand tools and light machinery. Pay: $20-$25 per hour

Job Title: ACI-Certified Commercial Concrete Technician Employment Type: Full-Time | Direct Hire About the Role We are seeking an ACI-Certified Commercial Concrete Technician to support high-profile commercial and infrastructure projects throughout the Denver metro area. This role is ideal for a detail-oriented professional who takes pride in quality control, testing accuracy, and compliance with industry standards. You'll work closely with project managers, inspectors, and field teams to ensure concrete materials and placements meet specifications, codes, and ACI requirements. Key Responsibilities Perform field and laboratory testing of concrete, including slump, air content, temperature, and compressive strength Conduct inspections and testing in accordance with ACI, ASTM, and project specifications Accurately document test results and prepare detailed reports Communicate findings with project teams, contractors, and engineers Ensure quality control compliance on commercial construction projects Maintain testing equipment and follow safety procedures at all job sites Travel to multiple job sites throughout the Denver metro area as needed Qualifications Active ACI Concrete Field Testing Technician - Grade I certification (required) 2+ years of experience on commercial concrete projects preferred Strong understanding of ACI, ASTM, and construction quality standards Ability to work independently in the field with minimal supervision Comfortable working outdoors in varying weather conditions Strong attention to detail and documentation skills Valid driver's license and reliable transportation Compensation & Benefits Competitive hourly pay or salary (based on experience) Overtime opportunities Full benefits package including medical, dental, vision, and PTO Long-term stability with consistent commercial project work Opportunity for advancement and additional certifications

TITLE Manufacturing Technician - Bakery & Sandwich Making (Night Shift) REPORTS TO Area Leader COMPENSATION BASE RATE $23.24/hr. + ($3/hr. shift differential) BENEFITS *************************************************************** THE RIGHT ROLE FOR YOU NOW HIRING FOR EARLY FEBRUARY! Help us Unlock Uncrustables! Here at Smucker, our main focuses are safety and quality as we produce millions of sandwiches. Our manufacturing technicians work in a fast paced, hands on, high-performance environment. We are looking for motivated, team-oriented individuals who are ready to learn and grow with us. KEY RESPONSIBILITIES Produce high quality products in a safe and healthy manner. Perform routine tests to check the quality of products, record findings, and adjust equipment settings as necessary to maintain quality standards. Use computers to input and maintain accurate records and data and HMI (Human Machine Interface) to adjust operational settings Ability to identify and troubleshoot machinery, process, and equipment issues and make corrections as needed. Performs sanitation and basic maintenance activities including cleaning, inspection, and lubrication (CIL), clean-in-place (CIP), and clean-out-of-place (COP) activities on a routine basis. Cross train within department to gain and improve skills, knowledge, and demonstrate leadership Operate material handling equipment such as walk behind stackers, scissor lifts, pallet jacks, and waves. Performs equipment changeovers and empties or replenishes materials to keep production flowing. EDUCATION AND EXPERIENCE High School Diploma or equivalent is required. 1 year of previous manufacturing experience. (food manufacturing preferred) ADDITIONAL REQUIREMENTS Ability to read, write, and interpret documents such as safety rules, Good Manufacturing Practices, and general instructions. Good communication skills are required both verbally and written. Ability to perform critical thinking skills to problem solve and resolve conflicts. Ability to work collaboratively in cross-functional & team-oriented environment Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without reasonable accommodation. PHYSICAL DEMAND The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. While performing the duties of this job, the employee is regularly required to walk, stand, and climb steps The employee must be able to work 12-hour night shifts (6pm-6:30am) The employee must be able to squat or kneel and to bend on a frequent basis. The employee must be able to tolerate exposure to flour and yeast, oils, and peanut butter as well as other materials. The employee must be able to lift + 50 pounds on an occasional basis. The applicant must pass an occupational physical test. Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. WORK ENVIRONMENT The work environment's characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Working conditions: Weekend work. 2-2-3 weekly schedule format. Computer usage. Environment temperature varies between hot and cold conditions. Noise level is moderate to high; hearing conservation program required. Operating, being near, and crossing platforms/ladders over or under machinery. The J. M. Smucker Co. (the “Company”) is an Equal Opportunity Employer. No person will be discriminated against in hiring or in any other aspect of their employment on the basis of race, color, religion, sex (including pregnancy), age, national origin, ancestry, citizenship status, sexual orientation, gender identity or expression, transgender status, marital status, familial status, disability, genetic information, protected veteran/military status, or any other characteristic protected by applicable federal, state or local law.

The Manufacturing Technician position is designed as an introduction to the industry of cGMP manufacturing. This position is a 2 on, 2 off , 3 on "pitman" Day shift schedule with working hours from 6:00 AM to 6:30 PM. This position performs all routine/non-routine cleaning of equipment, prepares buffers/medias, glass wash of misc. parts, assembles setups and filters, autoclaves media/materials, tests filter integrity, manages process waste flows and material movement, and executes inventory management tasks at the cGMP facility to support continuous manufacturing operations. This position requires a shift schedule and gowning into a clean room environment. This position requires PPE. Must be able to document, record activities in electronic systems and comply with regulatory requirements, cGMPs, Policy Documents and SOPs. Must be able to maintain training at 95% or greater. Must always wear proper PPE and follow all safety guidelines outlined by the SOP and site policies when working in the facility. Must be able to perform general tasks as assigned by Management to support manufacturing, i.e., staging materials, discarding waste, moving equipment, and other general clean room tasks. Responsibilities: Cleaning of equipment, glasswash of misc. parts, assembles setups and filters, autoclaves medias/materials, tests filter integrity, manages process waste flows and material movement, and executes inventory management tasks. Handling and discarding of hazardous and nonhazardous waste. Computer: Includes maintaining training and job-related functions. Ordering and stocking general supplies in the manufacturing production areas. Performing other various task as assigned by the Supervisor/Manager Due to non-routine cleanings and the need to adhere to the manufacturing schedule, it is required, if necessary, to stay past the assigned shift to complete such requests. This position requires standing for long periods of time. For cleaning, this position also requires bending, kneeling, and reaching above head. This position is considered "Essential Personnel" which requires 7 days a week work coverage even though the company closes (i.e., inclement weather). This position is required to ensure cGMP production tasks are completed every day. Salary Range: $21.63/hour-$27.40/hour Salary range provided per current averages and expectations. The salary and job title for this opening will be based on the selected candidate's qualifications and experience and may be outside this range. KBI has a robust total rewards strategy which includes an annual bonus structure for all employees, medical, dental, and vision coverage, paid PTO and holidays, 401K matching with 100% vesting in 60 days and employee recognition programs. KBI Biopharma, Inc. is an EEO/AA employer and actively seeks to diversify its work force. Therefore, all qualified applicants, regardless of race, color, national origin, religion, gender, gender identity, sexual orientation, age, disability or veteran status, are strongly encouraged to apply. I understand that neither the completion of this application nor any other part of my consideration for employment establishes any obligation for KBI Biopharma, Inc. to hire me. If I am hired, I understand that either KBI Biopharma, Inc. or I can terminate my employment at any time and for any reason, with or without cause and without prior notice. I understand that no representative of KBI Biopharma, Inc. has the authority to make any assurance to the contrary. I attest with my signature below that I have given to KBI Biopharma, Inc. true and complete information on this application. No requested information has been concealed. I authorize KBI Biopharma, Inc. to contact references provided for employment reference checks. If any information I have provided is untrue, or if I have concealed material information, I understand that this will constitute cause for the denial of employment or immediate dismissal.

Job Description CNC Manufacturing Technician - Join a Fast-Growing Startup Advancing Next-Generation Composite Manufacturing! Broomfield, CO | On-site A rapidly expanding advanced manufacturing startup is building a new class of automated production systems capable of creating high-performance composite structures at an industrial scale. The team is deploying cutting-edge hardware, data-driven processes, and automation technologies to unlock faster, more efficient, and more flexible ways to produce mission-critical components for aerospace, defense, and other high-reliability industries. As a Manufacturing Technician, you will be directly responsible for supporting the operation of the company's first full-scale production line. This role involves hands-on interaction with advanced equipment, precision machining tools, automated printing platforms, and quality inspection systems. If you enjoy working with hardware, have machining or manufacturing experience, and want to help build a new generation of manufacturing capabilities, this is an exciting opportunity to join a team shaping the future of composite production. About Us We are a venture-backed startup focused on modernizing the way complex composite structures are manufactured. Our technology combines advanced material processing, automation, and intelligent factory systems to deliver production speed and part quality that exceed the limitations of traditional methods. We operate in a fast-paced environment where technicians and engineers work closely together to scale cutting-edge manufacturing platforms that support next-generation aerospace and defense programs. Job Duties Operate, adjust, and maintain manufacturing equipment including CNC mills, lathes, mixing systems, and automated deposition tools Perform post-processing, machining, trimming, and finishing operations on composite parts Conduct dimensional checks, inspections, and quality verification using measurement tools Assist with equipment setup, calibration, and troubleshooting to maintain smooth production flow Support packaging, handling, and preparation of parts for customer shipment Collaborate with engineers and operations team members to improve processes and resolve issues Document production activities, observations, and equipment performance for internal reporting Maintain cleanliness, organization, and safety across production areas Qualifications 4+ years of experience in machining, manufacturing, or technician roles Experience operating CNC mills or lathes and using inspection tools Ability to read technical drawings and follow work instructions accurately Strong attention to detail and commitment to producing high-quality parts Basic familiarity with composites, additive manufacturing, or electromechanical systems Ability to perform hands-on work in a fast-paced startup environment Clear communication, teamwork, and problem-solving skills Preferred Experience Background in aerospace manufacturing or composite production Familiarity with extrusion-based or paste-based 3D printing platforms Knowledge of material mixing equipment or resin-based processes Experience working in small teams or early-stage companies Why Join Us Contribute to building a next-generation composite manufacturing platform Work directly with experienced engineers and founders on cutting-edge production systems Join a mission-driven team expanding the capabilities of modern manufacturing Equity participation in a high-growth early-stage company Hands-on exposure to advanced machinery, automation tools, and high-performance materials Medical, dental, and vision coverage Paid vacation, sick time, and holidays 401(k) with company matching Compensation Details $25.00 - $35.00 / hr

At Areté, we are on the forefront of developing innovative solutions, with great minds from all backgrounds, to help solve the nation's most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. As an Electronics Technician for production at Arete, you will be responsible for assembling the electronics and necessary subassemblies for AIRTRAC lasers. These assemblies require soldering, following procedures, and reading schematics and drawings. You will also be responsible for the construction, integration, and test of custom cabling harnesses. You will be working with a team of scientists, engineers, and technicians to assemble, test, and calibrate electronics for lasers. You will also contribute to building, testing, troubleshooting, repairing, and modifying developmental and production electronic systems independently, or under the direction of an electrical or optical engineer. This position is based in our Niwot, CO office. This is a non-exempt, non-supervisory, full-time position. If you're looking for a rewarding career in a fast-paced and innovative environment, Arete could be the perfect fit for you. We have an impressive range of benefits, programs, and perks that we offer: Health & Wellness: Medical, Dental & Vision Insurance Life and Long-Term Disability (LTD) Vision Reimbursement Fitness Reimbursement Financial: 401(k) Retirement Plan Contributions Employee Stock Ownership Plan (ESOP) Continuing Education Assistance Work-Life Balance: Flexible Scheduling Paid Time Off (PTO) Paid Parental and Bereavement Leave What We Value: Creativity and innovation in solving challenges Integrity and responsibility in all actions Collaboration across teams and specialties Responsiveness in fast-paced environments Passion for national security and excellence Experiences and Background We Look For (required skills): Familiarity with electronic test equipment such as oscilloscopes, current clamps, AC/DC power supplies, and multimeters Ability to produce professional documentation and thoroughly document setups and testing results. AA/AS in a Technical or Engineering field or similar relevant discipline. Minimum 2 year of experience preferred, and significant relevant experience may substitute for educational requirement. Good communication skills Ability to learn new skills quickly in a fast-paced work environment Highly organized and detail oriented Good consistent work ethic Nice to Have (preferred skills): Good computer skills Soldering experience, especially J-STD-001 certification Strong fine motor skills; ability to work on small assemblies under a microscope The salary range for this role is $60,000 to $65,000; however, Arete considers several factors when extending an offer of employment, including but not limited to: the position and associated responsibilities, a candidate's work experience, education/training, and key skills. Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at ************ for assistance.

ABOUT US Black Label Services (BLS) originally started in the Oil & Gas market, building a strong presence by providing full automation systems to well-site locations and becoming a competitive parts distributor. Within a few years, we emerged as a leader in well-site automation, and as we added talent to our roster, we expanded our market base beyond Oil & Gas providing superior turn-key solutions. Today, BLS continues to lead the oil and gas industry while also excelling in Renewable Natural Gas (RNG), biogas, and water treatment facility markets. We deliver exceptional solutions through innovative electrical engineering, UL508 panel fabrication, advanced SCADA programming, and custom power distribution systems. Our expertise in automation, controls, and power distribution ensures optimal performance, while our commitment to safety and quality sets us apart as a trusted partner. With a proven track record of success, we provide reliable, efficient, and sustainable systems that meet the unique demands of RNG and biogas facilities, driving the renewable energy industry forward. POSITION SUMMARY As an Insulation Blanket Manufacturing Technician, you will be at the heart of our thermal solutions team, transforming high-performance materials into custom insulation blankets and components. Your exceptional craftsmanship, keen attention to detail, and proactive problem-solving will ensure each blanket meets our customers' exacting requirements for thermal efficiency and reliability. Requirements ROLE AND RESPONSIBILITIES * Create insulation blankets based on design specifications, patterns, and measurements. This includes cutting fabric, sewing pieces together, and fitting blankets as needed. * Alter and repair existing blankets to ensure a proper fit and restore them to a high standard. This may include resizing, and fixing tears or other damage. * Verify use of appropriate fabrics, threads, and notions for different projects. Handle and store materials with care to avoid damage. * Develop or modify blanket patterns based on design specifications or customer requirements. Ensure patterns are accurate and properly aligned. * Inspect completed blankets and repairs for quality, fit, and adherence to design specifications. Make adjustments as necessary. * Communicate with clients to understand their needs and preferences. Provide professional advice and recommendations on the use and care of insulation blankets. * Perform regular maintenance on sewing machines and equipment to ensure optimal performance. Troubleshoot and resolve any issues that arise. * Other duties as assigned QUALIFICATIONS AND EDUCATION REQUIREMENTS COMPETENCIES * Proficiency with sewing machines, sergers, and related tools * Strong sewing, alteration, and blanket-construction techniques * Manual dexterity and fine motor control for detailed work * High level of accuracy in assembly and alterations * Adept at following specifications and inspecting finished products * Clear, professional interaction with clients and team members * Ability to interpret design requirements and provide feedback * Innovative problem-solving to meet custom design and fit preferences * Adaptable workflow to accommodate changing project scopes * Comfortable sitting or standing for extended periods and performing repetitive tasks * Able to lift, carry, push, and pull items up to 10 lbs safely * Strong adherence to safety protocols in a workshop environment EDUCATION, EXPERIENCE, CERTIFICATIONS * High school diploma or equivalent required * Vocational training or technical certification in sewing, textiles, or a related field is a plus * Proven experience as a seamstress or in a similar role * Hands-on familiarity with a variety of fabric types * Sewing machine operation or textile-manufacturing credentials * Workshop safety certification (e.g., machine-safety, PPE use) BENEFITS * Medical, Dental, and Vision Insurance * Life Insurance Fully Covered by the Company * Employee Assistance Programs (EAP) * Insurance for Accidents, Hospitalizations, and Critical Illness * 401K with company match. * Accrued Paid Time Off (PTO) * Paid Holidays EQUAL EMPLOYMENT OPPORTUNITY Black Label Services is committed to creating a diverse, inclusive, and equitable environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, military or veteran status. Candidates must successfully complete a pre-employment background check and drug screening. Applications will be accepted until the position is filled.

TITLE Manufacturing Technician - Bakery & Sandwich Making (Night Shift) REPORTS TO Area Leader COMPENSATION BASE RATE $23.24/hr. + ($3/hr. shift differential) BENEFITS *************************************************************** THE RIGHT ROLE FOR YOU NOW HIRING FOR EARLY FEBRUARY! Help us Unlock Uncrustables! Here at Smucker, our main focuses are safety and quality as we produce millions of sandwiches. Our manufacturing technicians work in a fast paced, hands on, high-performance environment. We are looking for motivated, team-oriented individuals who are ready to learn and grow with us. KEY RESPONSIBILITIES * Produce high quality products in a safe and healthy manner. * Perform routine tests to check the quality of products, record findings, and adjust equipment settings as necessary to maintain quality standards. * Use computers to input and maintain accurate records and data and HMI (Human Machine Interface) to adjust operational settings * Ability to identify and troubleshoot machinery, process, and equipment issues and make corrections as needed. * Performs sanitation and basic maintenance activities including cleaning, inspection, and lubrication (CIL), clean-in-place (CIP), and clean-out-of-place (COP) activities on a routine basis. * Cross train within department to gain and improve skills, knowledge, and demonstrate leadership * Operate material handling equipment such as walk behind stackers, scissor lifts, pallet jacks, and waves. * Performs equipment changeovers and empties or replenishes materials to keep production flowing. EDUCATION AND EXPERIENCE * High School Diploma or equivalent is required. * 1 year of previous manufacturing experience. (food manufacturing preferred) ADDITIONAL REQUIREMENTS * Ability to read, write, and interpret documents such as safety rules, Good Manufacturing Practices, and general instructions. * Good communication skills are required both verbally and written. * Ability to perform critical thinking skills to problem solve and resolve conflicts. * Ability to work collaboratively in cross-functional & team-oriented environment * Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without reasonable accommodation. PHYSICAL DEMAND * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. * While performing the duties of this job, the employee is regularly required to walk, stand, and climb steps * The employee must be able to work 12-hour night shifts (6pm-6:30am) * The employee must be able to squat or kneel and to bend on a frequent basis. * The employee must be able to tolerate exposure to flour and yeast, oils, and peanut butter as well as other materials. * The employee must be able to lift + 50 pounds on an occasional basis. The applicant must pass an occupational physical test. * Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. WORK ENVIRONMENT * The work environment's characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Working conditions: * Weekend work. * 2-2-3 weekly schedule format. * Computer usage. * Environment temperature varies between hot and cold conditions. * Noise level is moderate to high; hearing conservation program required. * Operating, being near, and crossing platforms/ladders over or under machinery. The J. M. Smucker Co. (the "Company") is an Equal Opportunity Employer. No person will be discriminated against in hiring or in any other aspect of their employment on the basis of race, color, religion, sex (including pregnancy), age, national origin, ancestry, citizenship status, sexual orientation, gender identity or expression, transgender status, marital status, familial status, disability, genetic information, protected veteran/military status, or any other characteristic protected by applicable federal, state or local law.

Job Description Hirsh Precision: Where Advanced Manufacturing Thrives Join our journey from the Front Range, where we've been revolutionizing manufacturing since 1979. At Hirsh Precision, our passion for quality and cutting-edge technology drives us to innovate in the medical, aerospace, industrial, and scientific sectors. As part of our commitment to improving lives, we value integrity, quality, and service. We're looking for a dynamic individual ready to enhance our company culture while contributing to industry excellence. Core Values and Mission We're on a mission to set the benchmark for precision manufacturing excellence, delivering world-class products and services with reliability and continuous improvement. Become part of a team that prioritizes honesty, productivity, loyalty, and dedication. Role Overview Are you ready to lead the charge in new part introductions? As a key player on our Engineering Team, you'll engage in estimating, project management, and process development. If you're a self-starter with a knack for leadership and an extensive knowledge of CNC machining, manufacturing processes, and GD&T, we want to hear from you. Your role is hands-on, requiring deep experience in solving complex manufacturing challenges related to CNC operations and tooling. Key Responsibilities Craft detailed process plans and instructions Document innovative manufacturing processes Create engineering procedures and standards Spearhead efficiency initiatives by recommending design or process modifications Accurately estimate costs of machined parts or components Lead the charge in quoting activities while supporting the Estimation team Coordinate production schedules to optimize manufacturing capabilities Offer manufacturing expertise and support innovations Initiate and implement novel manufacturing methods and equipment Analyze part or component drawings for manufacturability Prepare comprehensive operational reports Conduct cost-benefit analyses on proposed designs Evaluate production performance and methodologies Provide constructive manufacturability feedback throughout the New Part Introduction process Must-Have Skills and Abilities Minimum two years of manufacturing experience Proficiency in G-Code and CAM Programming Advanced in interpreting engineering drawings Knowledgeable in CNC setup and machining cycles Familiarity with various manufacturing techniques and equipment Professional communication capabilities Preferred Experience Bachelor's degree in Process, Mechanical, or Manufacturing Engineering with 2-5 years of manufacturing experience Alternatively, 5+ years of relevant engineering experience 3D modeling software expertise, especially SolidWorks Knowledge of project management software such as Smartsheet or Microsoft Project Experience with estimating software like Paperless Parts Comfortable with Microsoft Office Suite Physical capability to lift 50 lbs. Work Environment: Split between office and factory floor. Technical Proficiencies: Expertise in GD&T Proficiency in CNC tooling, programming, and various CAD/CAM systems Utilize cutting-edge machines and technologies: CNC Mill and Lathe systems from renowned manufacturers Mastercam and Esprit CAM Software US Citizenship is required for this position

Summary$21.50 / hour Perfect Attendance Bonus, 10% Shift Differential Paid Training Benefits Full Benefits starting first day: Medical Dental Vision 401k Life Hours 40 Hours a week +Overtime 1st (7 a to 330 pm) and 2nd Shift (330pm to 1200am M-F) Positions available Performs diverse and complex assignments in support of GEHC product development and manufacturing. Assignments may include but are not limited to set up and running of data acquisition equipment for tests, carrying out experiments, reporting/documenting results of tests and measures, lead compliance and quality activities and train other team members. Responsibilities including equipment setup, manufacturing, assembly, basic testing, basic troubleshooting, reporting/documenting results of tests and assembly operations. Work is performed from very detailed instructions and significant supervision. GE HealthCare is a leading global medical technology and digital solutions innovator. Our mission is to improve lives in the moments that matter. Unlock your ambition, turn ideas into world-changing realities, and join an organization where every voice makes a difference, and every difference builds a healthier world.Job DescriptionRole Responsibilities: Test production assemblies and sub-assemblies for correct operation and compliance to performance specifications. From detailed instructions, set up or modify equipment, calibrate and operate equipment (mainly routine tests & manufacturing operations). Tune equipment as per detailed instructions. Under close supervision, performs routine experiments and troubleshooting and unknowns to achieve root cause analysis and problem resolution. Conduct experiments and diagnostic tests, as required to draw conclusions Adjust variables as directed, take specified data, and bring equipment irregularities to the attention of the supervisor. Responsible for the maintenance of standard equipment and facilities. Maintain accurate records of the work performed and other records as may be required by management. Utilize basic technical communications throughout the new product cycle to improve internal models and/or externally sourced components in terms of system performance, reliability, functionality, and serviceability. Work is highly standardized and is closely guided with close supervisor with frequent checks. Maintains daily production output. May participate in quality control inspections. Execute training plans as required. Provide strong individual contributions in the context of achieving team goals . Works with team lead, engineers, supervisors, and managers to improve quality and process efficiency. Other duties as assigned and may be asked to be included in Quality and LEAN activities, training sessions and employee activity teams. Complies with all EHS and Quality procedures and policies. Required Qualifications: Associates degree in a Manufacturing, Engineering or Technology related fields, or a High School diploma and 2 years' experience as defined by having demonstrated electrical specific skills at a technician equivalent role proven in a formal educational and/or work environment. Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem-solving techniques Ability to draw accurate conclusions from test data, malfunctions, or deviations, and assist with corrections to the existing design or process Proficiency to understand and interpret basic written technical information Demonstrated ability to work well with limited direction and information Demonstrated attention to detail and quality-minded work habits Ability to communicate using English (or local language) Preferred Qualifications: Bachelor's degree in Manufacturing, Engineering or Technology related fields Associates in Electrical Engineering Technology Thru hole and surface mount soldering experience Proficient with computer programs like Microsoft Word, Excel #LI-SAM1 #ONSITE We will not sponsor individuals for employment visas, now or in the future, for this job opening. Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No

Maybell Quantum is growing quickly, and we are expanding our technical group! If helping to lead a unique process on an outstanding team at one of the most exciting companies in quantum infrastructure sounds interesting, then Maybell may be the place for you. Maybell is a venture-backed startup of scientists, engineers, visionaries, and innovators designing and building the hardware that makes quantum science possible. Maybell Quantum is seeking an experienced Production Technician. Our ideal team member is a hands-on individual who has experience consistently following a set process, recording data, and contributing to equipment and workspace improvements. They are self-motivated with strong communication skills and can work well in teams and individually. Role: As a member of the production organization, you will work closely with the team to build Maybell's dilution refrigerators. You will be responsible for the manufacturing of the product to ensure that it meets design intent and specifications. As well as maintaining a safe, organized, and clean work environment. Efficient production of our Dilution Refrigerator Utilize careful attention to detail throughout production tasks Collaboration with the Engineering, Quality, Science, and Qualification teams Provide feedback to improve quality, safety, and productivity Perform mechanical and electrical troubleshooting Support Quality Assurance, Quality Control, and validation of subassemblies and final product Required Skills and Experience: Minimum 5 years of experience in a manufacturing environment Experience fabricating complex and/or delicate mechanical assemblies Experience operating production equipment Ability to interpret and follow Standard Work Instructions and Quality Standards Use of hand tools and calibrated measurement tools (caliper, tape measurer, multimeter) Basic computer skills (Microsoft Word, Powerpoint, Excel, Jira) and fundamental math skills Experience with Lean Manufacturing Concepts (5S, Kaizen, SMED, Kan Ban, Gemba) Safety-oriented mindset Continuous Improvement mindset Do it right the first time mindset Open to working second and third shift schedules Desired Skills and Experience: Experience with high precision measurement systems (Vacuum and Sniffer Leak Checking) Experience with operating scientific equipment Experience with tube fittings (KF, CF, VCR, Compression, Aeroquip) a plus Experience with reading Process and Instrumentation Diagrams Experience with Pumps, Pressure Gauges, Pressure Tanks, Flow Meters, and pneumatics Experience with Welding, Soldering, and Brazing a plus Experience in a Start Up culture and R&D environment Experience with production of laboratory equipment, cryogenics equipment, or robotics a plus Forklift experience a plus Physically able to lift and carry 50lbs Base salary $20-30/hour

We require up to a 1 week trial period before hiring Roameo is building a rapidly growing organization dedicated to removing the barriers to outdoor travel. We believe that the convergence of transportation, hospitality, and technology will change how people connect with nature. Roameo combines upscale mobile travel suites designed for short -term stays and curated travel itineraries to provide a new form of experiential vacation. As part of this process, the RoameOEM business unit is specifically responsible for the design, production, assembly, and maintenance of Class B motorhomes based on the Ram ProMaster cargo van. The Production Technician is the Subject Matter Expert in the fabrication, assembly, and installation of prefabricated components into cargo van camper conversions. Production Technicians initially specialize in one of the following fields, then cross -train into additional fields: sub -framing & insulation; cabinets & woodworking; electrical, plumbing, heating & ventilation; and upholstery, textiles, & finishes. The Production Technician reports to the Production Lead and is responsible for accomplishing tasks in a direct -execution capacity. Job Duties: Converts cargo vans to mobile suites in parallel with other Production Technicians with guidance from the Production Lead. Assembles, Fabricates, Installs, Mounts: sub -frame surfaces; insulation; cabinetry; appliances; upholstery; electrical harnesses; plumbing routes; heaters and cooling units; windows; floors; ceiling, wall, & door panels; aesthetic features in the vehicles. Prepares new vehicles for installation of parts and components. Cabinetry & Panels: Assemble and install flat pack parts as full cabinets. Electrical: Assemble, install, and repair 110VAC & 12VDC components and wiring harnesses including inverters, shore power plugs, outlets, lights, water pumps, relays, fans, batteries, etc. Plumbing: Assemble, install, and repair plumbing system including water pump, hot water heater, faucets, drains, fittings, water tanks, and all other components. Cross -trains (teaches and receives instruction) in other Technician specialties. Maintain tools, equipment, and materials. Maintains a safe, clean, and efficient work area. Complies with safety protocols within the workspace environment. Job Responsibilities: Ability to work independently on multiple projects. Ask detailed questions before making assumptions. Read and understand production documentation: drawings, installation instructions, etc. Ability to overcome production obstacles while ensuring timely delivery of vehicles. Disseminates information up and down the chain of command to clarify and streamline production objectives. Identifies and reports production setbacks to the Production Lead. Requirements Qualifications: (Minimum) High School Diploma or equivalent, (Preferred) Trade School or higher Graduate or demonstrable experience in lieu of education. Familiarity with processes in one or more of the following areas: construction, woodworking, fabrication, upholstery, machine operation, plumbing, or electrical systems. Comfortable using hand tools, power tools, and machinery for assembly and installation of woodwork products safely and efficiently. Familiarity with Automotive/RV/Marine systems. Possess a valid driver's license. Working Conditions This position operates in a shop environment, where temperatures are regulated in the winter and fluctuate in the summer months. It requires the ability to safely use hand tools and work in tight spaces such as in and under vans and components. Employees work closely in a team setting and have the desire to actively participate in physically demanding work. Physical tasks include the ability to lift up to 50 lbs., standing for long periods of time, squatting, kneeling and bending to install components. Benefits Position Type, Hours and Benefits Full -time position, 40+ hours a week. Monday -Friday, 8:00 a.m. to 5:00 p.m. with a 1 hour lunch break. Benefits include health insurance/dental plan offering, paid time off and paid holidays. Pay Pay: $18.00 - $25.00 per hour Benefits: Dental insurance Health insurance Paid time off Schedule: 10 hour shift Work Location: One location Work Remotely: No

Job DescriptionBenefits: Competitive salary Health insurance Training & development Looking for a career with a company that makes a difference? Apply Today! CONTENTS PROFESSIONALS DENVER, is a leading restoration company based in Denver, CO, specializing in restoring and protecting the belongings of our clients facing damage from floods, fire and smoke. With a passionate team dedicated to excellence, we aim to provide peace of mind during difficult and stressful times. We are NOW HIRING for a Contents Production Technician: A great candidate for this role would have prior cleaning experience and or moving experience. As the Contents Production Technician, your primary role will be to: Respond to service calls as needed. Perform services as assigned, following Contents Professionals production guidelines. Communicate with crew chief to make sure all customer needs are met. Support crew chief and other production personnel, as needed. Clean and maintain vehicles, equipment, warehouse, and office areas, as needed. Pay: $20-21 an hour Benefits: Contents Professionals Denver offers: Weekly Pay schedule Health Benefits Career progression Professional development Key Responsibilities Perform production processes following Contents Professionals production guidelines per work order per crew chief directions Inventory and load the van with equipment, products, and supplies needed for jobs. Set up staging area and equipment for each job. Prepare rooms for cleaning processes. Follow EZ Production Guidelines for all production processes. Assist the crew chief and other production personnel. Perform end-of-job/end-of-day cleanup and breakdown. Leave jobsite with a clean and orderly appearance. Show respect for customers home/property. Position Requirements Valid drivers license High school diploma/GED. Must be able to lift 40 pounds Any restoration experience would be great.

PharmaLogic is the fastest-growing SPECT & PET radiopharmaceutical solutions provider and contract development and manufacturing organization (CDMO) with radiopharmacies across North America. We are passionate about expanding the power of radiopharmaceutical technology to provide transformative diagnostic and therapeutic agents to patients from bench to bedside. PharmaLogic offers you an exceptional opportunity to join our dynamic team as a Pharmaceutical Production Technician ! If you have a passion for nuclear medicine and want to make a significant contribution to patient care while working in a stimulating and dynamic Overnight availability is required. Must be able to work the following rotating shifts if possible - Day shift - 6 am - 2:30 pm. Night shift - 10 pm - 6:30 am) Job Overview: As a Pharmaceutical Production Technician, you will play a vital role in the operation of the facility's cyclotron, associated chemistry modules and analytical equipment for production and QC of PET radiopharmaceuticals in compliance with applicable safety, quality, and regulatory requirements. The position involves maintenance and repairs of some equipment such as chemistry modules and analytical equipment. You will also assist in facility maintenance, system repairs, PMs, and system modifications to increase your expertise and ensure system reliability. Job Responsibilities and Duties: Operate cyclotron for PET production. Perform maintenance and repairs on synthesis modules and analytical equipment. Perform PET radiopharmaceutical production and Quality Control (QC) in cGMP environment. Responsible for routine production, packaging and shipping of radioisotopes. Ensure compliance with all regulatory commitments and company policies and procedures including cGMP and radiation safety. Maintain records to comply with FDA requirements. Order parts and supplies for maintenance and production. Clean and maintain production areas (hot cells, laminar flow hoods, etc.). Other related duties as assigned. Job Requirements │ Skills │ Education: Academic background in physics, chemistry, engineering, or electronic technology; or completion of training at an advanced military electronics school; or an equivalent combination of education and experience preferred Experience in electrical, mechanical engineering, Physics, medical equipment services or equivalent. Pharmacy tech certification a plus. Experience working with ionizing radiation and radioactive equipment preferred Experience troubleshooting, performing repairs and maintaining equipment preferred Strong analytical, troubleshooting and customer service skills. Working knowledge of cGMP environment and regulations preferred Physical and Intellectual Requirements: Manual dexterity for manipulating small items; regularly lift at least 50 pounds throughout each shift and to be able to lift 75 pounds on occasion. Able to handle standing, walking and sitting for 4+ hours with limited rest intervals; good eye-hand coordination; fair eyesight (with or without correction lenses); normal hearing in at least one ear (hearing range of 20 Hz to 20 kHz); ability to analyze situations, set priorities and meet deadlines while maintaining attention to detail in a fast-paced and dynamic environment; effective organizational skills; a commitment to continuous learning; an ability to work well both independently and as part of a team. Come join our winning team and begin a fulfilling career with us by applying today. PharmaLogic is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class. Benefits Include: 401(k) retirement benefit program Medical Dental care Disability insurance Employee assistance program Extended health care Life insurance On-site parking Paid time off Vision care

Job DescriptionOverviewLightship is the first American all-electric recreational vehicle manufacturer currently developing an aerodynamic, battery-powered trailer for the electric age. As the macro transition to an all-electric transportation ecosystem accelerates, Lightship is bringing the increased convenience and superior performance that electrification offers to a pastime enjoyed by over 11 million American families. Honoring Diverse PerspectivesLightship is committed to hiring and developing top talent from diverse backgrounds. We believe representing and supporting diverse groups is key to the success of our team members, customers, shareholders and the achievement of our mission and vision. We operate in a collaborative environment with a flat organizational structure and expect a high degree of integrity, autonomy and creativity from all members of the team. About the RoleAs a Production Technician, you're a member of a production crew, reporting to the leader of an assigned production area. You will contribute to the success of Lightship by following detailed work instructions and observing safe operating principles of all assigned equipment and standard operating procedures (SOPs) for your area of responsibility. Early work will also include building out equipment, racks and setting up workstations. A combination of hard work and a good attitude will be essential to your success. If you're willing to learn, we can teach you what you need to know to be successful.Day shift will start at 7am and finish at 3:30 pm each day (Monday - Friday) with two 15 min breaks and a half hour lunch. This role is eligible for overtime pay, and occasional extra hours may be required.Responsibilities Follow all 5S standards and job safety practices and policies including but not limited to on-the-job safety; personal protective equipment; emergency procedures, etc. Inspect parts and previous work for proper quality standards and customer specifications. Operate and maintain production equipment to meet plant production goals. Assist with performing preventative maintenance on assigned equipment. Build positive relationships across designated team by effectively collaborating, communicating, and operating with a high degree of integrity. Work with engineering and quality to develop strong work instructions, processes and provide insights on improvement. Minimum Qualifications High School Diploma or equivalent education, or equivalent practical experience. This position involves the operation of hoisting and other machinery. In accordance with Colorado and federal child labor laws, employees in this role must be 18 years of age or older at the time of hire. Preferred Qualifications 1-year experience in a mechanical job-related field with demonstrated mechanical troubleshooting skills Proficiency in the use of hand and power tools Work experience in a manufacturing environment Basic computer skills Physical Environment and Working Conditions - May be subject to all the following, but not limited to: Hot/Cold working conditions Loud/Noisy environment Standing and walking for prolonged periods of time Climbing (stairs, and other equipment as necessary) The preceding position description has been designed to indicate the general nature and essential duties and responsibilities of work performed by employees within this position. It may not contain a comprehensive list of all duties, responsibilities, and qualifications required of employees in this position. Compensation Actual pay rate will be determined based on qualifications and experience. Lightship compensation consists of the stated pay range plus equity, which gives you a stake in the company. Employee Benefits & Philosophy - Applies to Full Time Employees only- Healthcare, Dental, Vision- 401k - Flexible Paid Time Off - that we actually want you to use!- 8 Company Holidays + the company observes a period of scheduled downtime during the end of the year for a week, allowing all employees to enjoy a break- 12 weeks paid parental leave- $2,000 per year towards an RV trip of your own &/or professional development opportunities - we call this a LightTrip Lightship offers all of its full time employees and their dependents full benefits including health, dental and vision insurance and covers 100% of the insurance premium. We are on a mission to create a more healthful all-electric experience for a pastime that millions of families enjoy and believe strongly that our team should not have to worry about quality healthcare for themselves or their loved ones along the way. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description This position functions primarily in a classified ISO-8 environment and requires the individual to wear appropriate PPE. This position will perform dispensing and formulation operations and perform other duties, such as cleaning, restocking, visual inspection, and labeling, as required and/or assigned. All assigned tasks must be conducted in adherence with all applicable procedures, cGMPs, company policies and any other quality or regulatory (Ex: OSHA, DEA, FDA, etc.) requirements. Facility is a multiple shift operation where variable shifts, including weekends, may be required. Schedule: Tuesday to Friday 3 PM Until 1:30 AM (or until work is completed) Pay: $25/hour SAFETY Strictly adhere to all cGMP, health and safety requirements, procedures, and corporate policies. Authorized to immediately stop any task that is determined to be an imminent hazard. Always promote and demonstrate safe work practices and adhere to PPE requirements. Safely handle chemicals, corrosives, solvents, and other pharmaceutical compounds. Demonstrate physical ability to lift a minimum of 50 lbs. and push/pull pallets, product cans, etc. multiple times per shift. PRIMARY RESPONSIBILITIES: Perform ISO-8 dispensing and formulation operations consistent with established protocols, procedures, and regulatory/cGMP requirements. Learn to utilize all relevant equipment/technology for formulation operations. Complete and document required training to gain proficiency for all assigned job tasks. Accurately and contemporaneously document all actions performed per GDP standards. Assist with classified and non-classified area cleaning and maintenance as required. Perform visual inspection, labeling, and additional support tasks as required. Make recommendations for process improvements. Possess the ability to master multiple processes across different areas. Recognize and respond appropriately to equipment/documentation issues and deviations; obtain appropriate clarification and guidance from leadership before proceeding. Maintain a quality focused, “Right First Time”, attitude. Arrive for work on-time, prepared to work in the classified environment for the majority of each shift. Operate with Integrity by maintaining high ethical standards. Treat all employees with trust, respect, and professionalism. Speak up and hold others accountable for high integrity by providing constructive feedback. Take accountability for individual and team mistakes and participate in related corrective actions. Ensure patient safety by understanding you and your team's impact on product quality. Excel within a diverse and high performing team. Remain open to new ideas and perspectives, communicate across shifts as required, and comply with site process to create a safe work environment. Demonstrate a passion to perform by meeting personal and departmental goals. Self-driven and self-accountable, performs required tasks, and progresses on qualifications within reasonable timelines. Demonstrate innovation abilities by identifying and speaking up about viable options for improvements and exploring and creating a path for implementation. High School Diploma or equivalent. Must pass a drug test. Must speak, write, and read English. Must be a team player. Must have excellent attention to detail. Prior Sterile Compounding and Pharmaceutical Industry experience. Prior experience operating manufacturing equipment/machinery. Knowledge of FDA guidelines, cGMP, and GDP. Willingness to participate in training and gain other certifications as needed. Knowledge of basic arithmetic and chemistry calculations. Ability to work in a fast-paced environment with dynamic priorities and demands. Excellent written and verbal communication skills. Desire to expand knowledge and grow with the company. Leadership ability.

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

will be between $34 & $40 Depending on experience Night Shift: Starting at 5:00 PM Additional $2/HR for Shift Differential for Wednesday-Sunday This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures Dismantle machines and equipment to gain access to problem areas Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures Inspect and measure parts to detect wear, misalignment, or other problems Remove and/or replace worn or defective parts Other duties as assigned. Qualifications: High School Diploma or GED Preferred 2+ years of commercial or industrial maintenance experience or experience in a related field Experience with low and high voltage electrical systems Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs Demonstrated ability to troubleshoot PLCs, I/O and VFDs Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. Must be able to frequently reach up to 31-77 inches. Physical Demands: Regularly lift and/or move up to 25 pounds Frequently lift and/or move up to 50 pounds Occasionally lift and/or move up to 100 pounds Regularly stand; walk; stoop, kneel, crouch, climb, or crawl Ability to reach and handle objects, tools, or controls Shamrock anticipates closing the application window for this job opportunity on or before December 31, 2026 Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to “treat associates like family and customers like friends.” Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.