Explore jobs
Find specific jobs
Explore careers
Explore professions
Best companies
Explore companies
Best manufacturing technician certifications
Manufacturing technician certifications allow job seekers to demonstrate their competency as an manufacturing technician to employers. However, not all manufacturing technician certifications provide the same value for job seekers.
The best certifications for a manufacturing technician are Certified Pharmacy Technician (CPhT), Master Certified Electronics Technician (CETma), and OSHA Safety Certificate .
Below is a list of the best manufacturing technician certifications. Obtaining an manufacturing technician certification will give you a leg up when you apply for jobs and increase your potential salary.
15 best certifications for manufacturing technicians
| Rank | Manufacturing technician certification | Organization |
|---|---|---|
| 1 | Certified Pharmacy Technician (CPhT) | PTCB |
| 2 | Master Certified Electronics Technician (CETma) | ETA |
| 3 | OSHA Safety Certificate | Delaware Tech... |
| 4 | Certified Manufacturing Specialist (CMS) | ATMAE |
| 5 | EPA Amusement Operators Safety Certification (EPA) | EPA |
| 6 | Forklift Safety and Inspector | CIC |
| 7 | Six Sigma Green Belt | IASSC |
| 8 | Certified Phlebotomy Technician (CPT) | NHA |
| 9 | Emergency Medical Technician (EMT) | NREMT |
| 10 | Microsoft Dynamics AX 2012 Lean Manufacturing | MS |
| 11 | Incident Safety Officer - Fire Suppression Certification (ISO) | FDSOA |
| 12 | Certified Manufacturing Engineer (CMfgE) | SME |
| 13 | Certified Technical Professional (CTP) | ATMAE |
| 14 | Certified Medical Office Manager (CMOM) | PMI |
| 15 | Certified Quality Auditor (CQA) | ASQ |
15 best manufacturing technician certifications
1. Certified Pharmacy Technician (CPhT)
PTCB's pharmacy technician certification program enables technicians to work more effectively with pharmacists to offer safe and effective patient care and service. Certification is achieved by meeting specific eligibility requirements and earning a passing score on the Pharmacy Technician Certification Exam (PTCE). The PTCB certification program is accredited by the National Commission for Certifying Agencies (NCCA).
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? Every 2 year(s)
2. Master Certified Electronics Technician (CETma)
A technician with six or more years combined work and electronics training may be eligible for the ETA Master Certified Electronics Technician (CETma) certification. The Master certification was created to showcase those technicians who are able to demonstrate proficiency in the many fields of electronics. In addition to the Associate level certification, one must successfully obtain six other certifications, with no more than two originating from the same specialized category, in order to qualify.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 1 year(s)
3. OSHA Safety Certificate
This 40-hour program covers both the Construction 1926 and General Industry 1910 Standards, how to effectively interpret the Federal Register, health issues related to a work environment, recognition of physical hazards related to the violation of OSHA standards, and employer implementation of their own pro-active safety and health procedures.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? No
- Renewal required? No
4. Certified Manufacturing Specialist (CMS)
Certified Manufacturing Specialist (CMS) program is geared toward programs with a strong manufacturing emphasis
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
5. EPA Amusement Operators Safety Certification (EPA)
A comprehensive, equipment specific safety program designed to provide operators and their employees with a thorough understanding of best risk management practices. Industry accidents, which serve to put a spotlight on potential issues, can often be avoided through the utilization of proper risk management techniques.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
6. Forklift Safety and Inspector
Most personnel operating and working around forklifts have had little or no quality training. This training program exceeds OSHA's new training requirements.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? Every 2 year(s)
7. Six Sigma Green Belt
The IASSC Certified Lean Six Sigma Green Belt (ICGB) is a professional who is well versed in the Lean Six Sigma Methodology who both leads or supports improvement projects, typically as a part-time role. A Lean Six Sigma Green Belt possesses a thorough understanding of all aspects within the phases of D-M-A-I-C. They understand how to perform and interpret Six Sigma tools and how to use standard principles of Lean.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
8. Certified Phlebotomy Technician (CPT)
A Certified Phlebotomy Technician (CPT) draws blood from patients or donors in hospitals, blood banks, or similar facilities for analysis or other medical purposes.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 2 year(s)
9. Emergency Medical Technician (EMT)
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? Every 2 year(s)
10. Microsoft Dynamics AX 2012 Lean Manufacturing
This exam is designed for partners, consultants, pre-sales consultants, and professionals who plan to use lean manufacturing functions in Microsoft Dynamics AX 2012. Candidates should have a general working knowledge of Microsoft Dynamics AX 2012, including production and trade and logistics concepts, along with a moderate understanding of basic lean manufacturing concepts and production processes.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
11. Incident Safety Officer - Fire Suppression Certification (ISO)
A fire department incident safety officer's mission is to promote safety standards and practices in the fire, rescue and emergency services community. Members of the Fire Department Safety Officers Association, applicants sponsored by the Authority Having Jurisdiction (AHJ) and individuals meeting the duties and requirements of a company officer or an Incident Scene Safety Officer may apply.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 5 year(s)
12. Certified Manufacturing Engineer (CMfgE)
Professionals who earn a CMfgE demonstrate a comprehensive knowledge of manufacturing processes and practices. Pursuing a CMfgE certification requires a minimum of 8 years of combined manufacturing-related education and/or work experience, including a minimum of 4 years of work experience. A CMfgT with a minimum of 7 years manufacturing-related work experience and/or education also qualifies.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
13. Certified Technical Professional (CTP)
Certified Technical Professional (CTP) program is designed to serve graduates of both 2-Year and 4-Year Programs. The exam is broad-based, geared to technical programs without a management component that result in either an associate (AS, AAS) degree or a baccalaureate (BS, BA) degree.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
14. Certified Medical Office Manager (CMOM)
Experienced medical office professionals with exceptional administrative skills are eligible to sit for the Certified Medical Office Manager (CMOM) exam. To attain CMOM certification, all candidates must demonstrate a high level of knowledge in financial management, managed care contracting, personnel, and time management. Risk management, medical record keeping and facility management issues should also be mastered.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required?
15. Certified Quality Auditor (CQA)
The Certified Quality Auditor is a professional who understands the standards and principles of auditing and the auditing techniques of examining, questioning, evaluating and reporting to determine a quality system's adequacy and deficiencies. The Certified Quality Auditor analyzes all elements of a quality system and judges its degree of adherence to the criteria of industrial management and quality evaluation and control systems.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
What is the best certification for a manufacturing technician?
The best manufacturing technician certification is Certified Pharmacy Technician (CPhT). The Certified Pharmacy Technician (CPhT) is awarded by the Pharmacy Technician Certification Board. This certification is great to have as it shows an improvement in your competency to perform your role. You can earn this certification at the beginning of your career, as it often doesn't require a minimum education level and work experience.
Here's a bit more background on how to obtain this manufacturing technician certification:
- To become a certified Certified Pharmacy Technician (CPhT), you need to pass the exam.
- Lucky you - certification doesn't require more than two years of work experience.
- Renew certification every 2 year.
What are some of the most in-demand certifications for manufacturing technicians?
The most in-demand manufacturing technician certification is Six Sigma Green Belt based on all active job postings. Having this manufacturing technician certification will give you access to more manufacturing technician jobs with higher salaries.
What certifications can impact a manufacturing technician career and salary?
The Certified Pharmacy Technician certification will help you to secure a pharmacist technician position, which will increase your pay and career trajectory. A pharmacist technician's average salary is $34,419 whereas manufacturing technicians make an average salary of $37,853.
The most common combination of manufacturing technician certifications include: Certified Pharmacy Technician (CPhT), Master Certified Electronics Technician (CETma), and OSHA Safety Certificate .
Online courses for manufacturing technicians to earn certifications
1. Sensor Manufacturing and Process Control
"Sensor Manufacturing and Process Control" can also be taken for academic credit as ECEA 5343, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our fourth course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled "Sensors and Sensor Circuits", our second course entitled "Motor and Motor Control Circuits", and our third course entitled "Pressure, Force, Motion, and Humidity...
2. Simulation of Manufacturing Process Using R Simmer
Welcome to "Simulation of Manufacturing Process Using R Simmer". This is a project-based course which should take about 2 hours to finish. Before diving into the project, please take a look at the course objectives and structure. By the end of this project, you will gain introductiory knowledge of Discrete Event Simulation, Manufacturing Process Analysis, be able to use R Studio and Simmer library, create statistical variables required for simulation, define process trajectory, define and...
3. Manufacturing process selection and Design for manufacturing
Learn about the basics of selecting process for a mechanical design and the principles of design for Manufacturing...
4. The Production Part Approval Process (PPAP)
The 18-step process for ensuring new parts are consistently manufactured and meet their customers' quality expectations...
5. Process Capability Analysis
A Powerful Tool Set for Understanding your Manufacturing Process Relative to Your Customers' Quality Expectations...
6. Manufacturing Guide for Mechanical Product Development
Learn how everyday physical products are manufactured with no prior experience in engineering...
7. Leadership, Business Process Improvement, & Process Mapping!
Learn the leadership, communication, and process mapping skills to accelerate your career!...
8. Statistical Process Control (SPC) Using Microsoft Excel
A Deep Dive into Analyzing your Process Data to Drive Quality Improvements within your Organization...
9. Process Mining with Celonis
Learn and practice how to combine data science and process mapping techniques to visualize processes with real data...
10. Process Improvement
#1 Process Improvement course: The step by step guide on how to deliver effective and lasting process improvements...
11. Basic Good Manufacturing Practices (GMP)
Learn the good practices that applies to the pharmaceutical industry...
12. Medical Device Process Validation. ISO 13485. IQ OQ PQ.
Validate a process to gain approval to sell medical devices in the EU, U.S. & Internationally. Compliance to ISO 13485...
13. Batch Processing with Spring Batch & Spring Boot
Batch Processing of Data with Java Spring Framework & My SQL. Item Reader, Item Writer, Item Processor & JPA Reader...
14. Operations Management A-Z: Business Processes and Systems
Operations Management: Supply Chain & Business Processes in Industry for Manufacturing and Services Organizations...
15. ISO 22000:2018. Food Safety Management System
Understand the requirements for a food safety management system applicable for any organization in the food chain...
16. ISO 13485 - IQOQPQ - Process Validation for Medical Devices
Installation Qualification (IQ), Operational Qualification (OQ) & Performance Qualification (PQ) Medical Devices...
17. Process/Chemical Engineering - BOOTCAMP 2021
The only course with over 10 hours practical knowledge about main process equipment Design, Control and Safety...
18. Advanced Process Control & Safety Instrumented Systems SIS
Learn how the main process equipment such as chemical reactors , pumps , compressors & heat exchangers are controlled...
19. Business Process Mapping
The complete guide to map any business process...
20. Mechanical design and Product development process
Learn the basic ideas and concepts behind developing mechanical products related to mechanical engineering...