Manufacturing technician jobs in Maple Grove, MN - 465 jobs

This role is responsible for meeting daily customer demand and production schedules. The Manufacturing Technician I ensures safety and quality standards are maintained at all times. The Manufacturing Technician I will assemble products by using a variety of specialized equipment, fixtures, work instructions and test equipment to perform a series of operations to correctly produce/assemble/test medical devices. Work with Manufacturing Lead and/or Specialist to ensure customer demand and the production schedules are met. Participate in basic problem-solving activities to ensure stable operation of the work cell. Report problems or concerns with quality, processes, equipment, materials and labor to Manufacturing Lead or Production Supervisor. Observe, maintain, coordinate and complete standard work. Participate in DBS concepts and continuous improvement activities within designated work area. Sustain 5S activities by maintaining a clean and organized work area to facilitate manufacturing functions. Participate as an active member of the production team and assist in product processing. Follow documented policies and procedures as designated by the company's Quality System. Complete required documentation relating to regulatory requirements. Qualifications: Minimum Education & Experience: High school diploma or some work experience. Ability to read and follow documents such as safety rules, operating procedures, and work instructions. Ability to communicate effectively through oral and written communications. Ability to work with others collaboratively. Preferred:GMP knowledge Medical device manufacturing experience. Microscope experience Ability to analyze and solve problems. Physical Requirements: Must be able to work in areas that may contain adhesives, solvents, and chemical processes. Ability to frequently sit, stand, walk, reach with hands at arm's length, climb or balance, stoop, kneel, crouch, bend and twist. Ability to regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 50 pounds. Ability to observe and inspect small parts over extended periods of time Specific vision requirements include close vision and color vision. Must be willing and able to conform to controlled environments with regard to apparel and personal hygiene.

**Department:** Production **Electric Machinery Company, a division of WEG Electric Corp.** **Minneapolis, MN** Manufacturing Technician (Union Environment) Department: Production ** The Manufacturing Technician positions work with team members to meet production goals. Performs activities related to **Assembly** , **Lamination** , or **Winding** in a manufacturing environment, while adhering to all safety standards. **Requirements:** + High school diploma preferred but not required. **Major Areas:** + **Assembly** ; responsible for the assembly of motor, generators and drives. + **Lamination** ; responsible for assembling laminated subassemblies for stator winding, pole winding, exciter winding and rotor assembly. + **Winding** ; performs the setup, layout, winding, connecting, testing and troubleshooting of electrical AC or DC rotating equipment. **Salary:** + 1st Shift; salary range $20.00 hourly to $24.00 hourly + 2nd Shift salary range $20.00 hourly to $24.00 hourly (plus $2.00/hour differential) + Will compensate with experience. Position is full-time. **Skills Matrix:** + Skills and advancement within the department is documented via the Skills Matrix. The skills matrix outlines the skills Assembly, Lamination, and Winding, an opportunity to increase your salary. **Pay Types:** + Voluntary weekend overtime; Saturday is paid at time and half; and Sundays are paid at double time! **Job Type** **:** + Monday - Friday, 1st shift 7:00 a.m. - 3:30 p.m. + Monday - Friday, 2nd shift 3:30 p.m. - 12:00 a.m. + Full-time (Union) **Benefits:** + Medical, Dental & Vision Insurance eligible your 1st day on the job + 401K with Match 1st month following hire + Quarterly Bonus Program payout potential + Company paid Holidays (12) and Paid Birthday (1) (use anytime throughout the year) + Paid Time Off (PTO) available immediately + Company paid Short- & Long-Term Disability + Company paid Life Insurance + $6,000 annual Tuition Reimbursement program + Company provided tools + Company provided uniforms (laundered) + Company reimbursement for Safety Shoes & Safety Glasses + Secure, onsite free parking **Physical Requirements:** + Routinely lifts and moves objects up to 20 lbs. + Occasionally lifts and moves objects up to 50 lbs. + Routinely ascends/descends ladders and stairs. + Occasionally works at heights or on platforms. + Occasionally positions self in various works spaces, including low, tight or confined spaces. + Routinely remains in a stationary position, often standing or sitting for prolonged periods of time. + Routinely uses repetitive motions including the wrists, hands or fingers to operate machinery or tools. + Occasionally moves from one work station to another to accomplish tasks. **Company cannot provide sponsorship for this position** **Please, no agencies**

Why Join Bracco Medical Technologies? We care as much about our employees as we do our patients. Our culture fosters a work environment where employees can thrive, be passionate and have fun along the way. Each member of the Bracco Medical Technologies team has the power to make a difference......every day! As a member of the Production Operations team, the Lead Production Operator will be responsible for leading all production activities for designated product line(s). This individual will train Production Operators on assembly processes, techniques and skills needed to perform assembly of ACIST Medical devices and other production tasks, ensure that Standard Operation Procedures (SOP's) and Work Instructions (WI's) are followed and meet quality requirements and standards, provide day-to-day workflow guidance to ensure daily goals are met, and assist with documentation updates to management as necessary. Primary Duties & Responsibilities: Training Learn and understand a wide variety of production job duties at a high level of detail and maintain that knowledge by performing those duties when you are not training. Coordinate and deliver employee training to production operators ensuring that procedures are followed and meet all quality requirements. Scope includes new-hire training, temporary employee training and on-going employee cross-training. Provide ongoing feedback and coaching to employees during training to maximize their learning Coach and train employees to achieve maximum quality and productivity and ensure employees are following procedures. Escalate non-compliance issues as needed to management. Report on progress of employees under guidance during training periods to management. Conduct routine training audits to identify training gaps. Conduct re-training to correct deficiencies. Create, implement and maintain a training matrix for the production lines. Integrate training plans within the Learning Management System (LMS) Complete all training documentation requirements timely and accurately including post-training follow-up. Assist in developing and maintaining training metrics to drive performance improvements. Assist in collecting and providing training key performance indicators (KPI's). Observe and audit work to make proposed changes to processes or documentation that enhance production while positively contributing to safety, quality, cost, etc. Actively seek to improve documented procedures including but not limited to standard operating procedures and work instructions and provide suggestions for improvement and/or corrections to Manufacturing Engineer and management. Stay current with changes and enhancements made to existing processes and products to ensure revisions are accurately presented during training. Interact directly with manufacturing engineering and production personnel as well as cross-functional personnel to help identify and solve problems impacting production processes and training Identify gaps in training curriculum, obtains approval for resolution, and take action to correct. Production Line Lead Become the SME on your designated production lines. Able to communicate, delegate, encourage, and motivate line workers to meet production deadlines and goals in positive and creative manner. Encourage teamwork, initiative and sets good example. Report line down time and non-conforming material to management. Assist with all tasks related to production including but not limited to performing assembly and test duties Monitor and ensure there are no stockouts of sub-assemblies Maintain a clean and organized work area. Use basic problem-solving skills to ensure stable operation of the work cell. Report problems or concerns with quality, processes, equipment, materials to Production Supervisor. Update production metrics and facilitate regular team communication. Perform timely transactions online utilizing ERP/MRP system Understand and comply with ACIST Medical Quality Policy, ESD precautions, and OSHA guidelines as applicable Become knowledgeable with SAP and help production operators with inventory and processing questions. Create and close Production Orders for Production lines. Maintain quarterly (Point Of Use) inventory for designated area Assist Team Lead with work activities in designated areas Qualifications (Knowledge, Skills & Abilities): Minimum High School diploma or equivalent 3 - 5 years electro/mechanical medical operations experience or advanced degree in operations 2+ years experience in team lead or similar role Knowledge and ability to use of mechanical assembly tools Advanced level of computer proficiency including MS Word, Excel, Outlook, and MRP Systems and database systems Knowledge of Good Manufacturing Procedures (GMP's), ISO regulations, and Quality Systems as it pertains to hardware manufacturing at Medical Device Manufacturers Demonstrated ability to follow manufacturing processes including problem solving The ability to maintain accurate documentation (e.g., record trace ability information onto routers, and transact materials online) Ability to work effectively in a team environment and contribute to maintaining positive interpersonal relationships and foster cooperation within and outside the department The physical ability to lift and package assemblies up to 45 lbs Ability to handle multiple tasks simultaneously Ability to communicate in a clear and understandable format. Deal with constructive criticism and be able to use that in learning opportunity. Preferred: 4-7 years electro/mechanical medical device operations experience or advanced degree in Operations management Demonstrated experience or proven ability utilizing measurement equipment (i.e. DMM, caliper, micrometer, oscilloscope) Sense of urgency and self-motivation Compensation & Total Rewards: Estimated Starting Hourly Range: $29.00 - $32.00/hour *Estimated Starting Hourly Range is reflective of the range Bracco Medical Technologies reasonably expects to pay for the position. The range provided is based on compensation and market data specific to the position. Total Rewards: Paid Time Off, Company Holidays & Paid Family Leave - We provide PTO and Company Holidays to help you recharge, relax and do what's important to you, when it's important to you. Our 100% paid family leave options for parents, grandparents and eligible family members provide support for growing families as well. Achieve - Beyond competitive compensation, we offer options to help you plan for a financially secure future, including an annual incentive plan and 401k savings plan contributions. Live well - We offer comprehensive benefit options to help protect you along the way, including medical, dental, vision, and life insurance, employer HSA contributions, employee assistance program, short-term disability, etc. Evolve - Through structured on-the-job learning, workshops, seminars, and our tuition reimbursement program, you'll find many opportunities to grow, personally and professionally. Choose - You won't find “stuffy” here-whether your position requires a hybrid or in-the-office working arrangement. That means business casual for your attire and flexibility in your schedule, wherever possible. Bracco Medical Technologies is an Affirmative Action/Equal Opportunity Employer. Bracco Medical Technologies desires priority referrals of protected veterans for all openings.

Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Beckman Coulter Diagnostics, one of Danaher's (*********************************** 15+ operating companies, our work saves lives-and we're all united by a shared commitment to innovate for tangible impact. You'll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact - innovating at the speed of life. As a global leader in clinical diagnostics, Beckman Coulter Diagnostics has challenged convention to elevate the diagnostic laboratory's role in improving patient health for more than 90 years. Our diagnostic solutions are used in routine and complex clinical testing, and are used in hospitals, reference and research laboratories, and physician offices around the world. Every hour around the world, more than one million tests are run on Beckman Coulter Diagnostics systems, impacting 1.2 billion patients and more than three million clinicians per year. From uncovering the next clinical breakthrough, to rapid and reliable sample analysis, to more rigorous decision making-we are enabling clinicians to deliver the best possible care to their patients with improved efficiency, clinical confidence, adaptive collaboration, and accelerated intelligence. Learn about the Danaher Business System (************************************************************ which makes everything possible. The Senior Technician Production (SMS final integrator/module assembler) for Beckman Coulter Diagnostics is responsible for supporting the daily production needs which include following established operation procedures, maintaining appropriate training records for your role, sustaining a smooth flow of material and the execution of work orders to on-time completion. We operate using Daily Management principles, providing immediate guidance and feedback to our associates, and focusing on daily, monthly, and quarterly objectives. Our work delivers both instruments and reagents to customers in hospital and laboratory environments, supporting patient health. This position reports to the Manager of Production Operations and is part of the SMS assembly Team l ocated in Chaska, MN and will be an on-site role. In this role, you will have the opportunity to: + Execute the daily production plan to due date conformance and quality standards; Understand workflow and daily production goals. + Able to execute complex assembly tasks and module level testing following standard operating procedures with minimal supervision. + Troubleshoot issues as they arise, escalating as necessary or working directly with Technicians, Engineering and Quality to fix assembly related issues on the manufacturing line. The essential requirements of the job include: + High school degree (or equivalent). + And must have 5+ years of experience. + Train to and follow SOPs, engineering drawings, work orders, and other specifications while maintaining FDA requirements. Travel, Motor Vehicle Record & Physical/Environment Requirements: + Ability to travel 75% to Miami, FL facility for on-going training and support in first year of employment. Timeline is subject to change based on business needs. + Ability to lift, move or carry equipment up to 40 lbs. + Ability to stand/walk for prolonged periods of time to perform tasks. It would be a plus if you also possess previous experience in: + Experience in a regulated industry preferred (e.g., FDA, ISO) + Proficiency with Microsoft applications, including Word, PowerPoint, and Excel and the basic Windows operating system. Beckman Coulter Diagnostics, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info (**************************************************************************************** . The hourly range for this role is $24-$28 USD. This is the range that we in good faith believe is the range of possible compensation for this role at the time of this posting. This range may be modified in the future. This job is also eligible for bonus/incentive pay. We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. Join our winning team today. Together, we'll accelerate the real-life impact of tomorrow's science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. For more information, visit *************** . Danaher Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. The U.S. EEO posters are available here (********************************************************************************************** . We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact:************** or applyassistance@danaher.com .

This role is responsible for meeting daily customer demand and production schedules. The Manufacturing Technician I ensures safety and quality standards are maintained at all times. The Manufacturing Technician I will assemble products by using a variety of specialized equipment, fixtures, work instructions and test equipment to perform a series of operations to correctly produce/assemble/test medical devices. Work with Manufacturing Lead and/or Specialist to ensure customer demand and the production schedules are met. Participate in basic problem-solving activities to ensure stable operation of the work cell. Report problems or concerns with quality, processes, equipment, materials and labor to Manufacturing Lead or Production Supervisor. Observe, maintain, coordinate and complete standard work. Participate in DBS concepts and continuous improvement activities within designated work area. Sustain 5S activities by maintaining a clean and organized work area to facilitate manufacturing functions. Participate as an active member of the production team and assist in product processing. Follow documented policies and procedures as designated by the company's Quality System. Complete required documentation relating to regulatory requirements. Qualifications: Minimum Education & Experience: - High school diploma or some work experience. - Ability to read and follow documents such as safety rules, operating procedures, and work instructions. - Ability to communicate effectively through oral and written communications. - Ability to work with others collaboratively. Preferred: - GMP knowledge - Medical device manufacturing experience. - Microscope experience - Ability to analyze and solve problems. Physical Requirements: - Must be able to work in areas that may contain adhesives, solvents, and chemical processes. - Ability to frequently sit, stand, walk, reach with hands at arm's length, climb or balance, stoop, kneel, crouch, bend and twist. - Ability to regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 50 pounds. - Ability to observe and inspect small parts over extended periods of time - Specific vision requirements include close vision and color vision. - Must be willing and able to conform to controlled environments with regard to apparel and personal hygiene.

Job Title: Senior Production Technician Department: Operations Reports to: Director of Manufacturing Pay Range: $50,000.00 to $80,000.00 Salary - based on experience Full-Time, Monday-Friday, 40 hours/week About Elucent Medical: Elucent Medical is a medical device company focused on developing surgical navigation technologies, particularly for cancer surgery, to improve patient outcomes through precision and efficacy. The company's solutions are designed to transform traditional surgical instruments into "smart" tools, enhancing surgical precision and patient outcomes. Job Summary: The Senior Production Technician will investigate and conduct root cause failure mode analysis on the Elucent navigation system, which consists of an electromechanical chassis, computer, display, and an electrical patient pad. This will require understanding assembly drawings, electrical schematics manufacturing procedures, as well as the ability to trace the interaction of software programming with hardware functionality. This will also require using equipment such as soldering equipment, electrical test equipment (oscilloscope, multi-meter), vision systems, and standard mechanical tools for assembly. Supervisory Responsibilities: None. Job Responsibilities: Investigation and identification of root cause for non-conforming systems. Evaluation of returned capital assets for potential repairs and necessary upgrades as part of the depot service repair activities. Assist manufacturing engineering with process improvements, fixture development, and equipment maintenance and validations. Provide overflow capacity for standard production activities by assisting with capital asset builds, production release testing, and crating for shipment. Assist with experimentation and evaluation of new designs, processes, and software revisions. Qualifications Education and Experience: 5+ years of Production Technician experience. GED of HS diploma, preferred Associates or Technical degree Medical device experience required. Electrical experience required. Extensive solder experience required. Startup, small business experience preferred. Required Skills/Abilities: Ability to work independently to troubleshoot non-conforming capital systems and sub-components. Identify root cause failure modes. Self-starter who can thrive in a fast-paced environment. Creative troubleshooting with minimal guidance from engineering. Physical Requirements / Work Conditions: Lift 55 lbs, stand 4 hrs. Light Manufacturing. Elucent Medical Benefits, Culture and Work Environment At Elucent Medical, we prioritize our employees' well-being by providing comprehensive benefits including comprehensive health insurance, a generous retirement savings plan with company matching, flexible work arrangements, generous paid time off, and ongoing professional development opportunities, ensuring a fulfilling and balanced work life. Fulltime Employees are provided: 401(k) 401(k) matching (4%) Dental insurance Health insurance Vision insurance Paid Holidays Paid Vacation Days Paid Sick Days Short Term Disability Long Term Disability Life Insurance Pet Insurance Employee Assistance Programs Affirmative Action / EEO Statement Elucent Medical provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Requisition ID: 912465 Store #: WM0029 Optical Coating BPARK Position: Full-Time Total Rewards: Benefits/Incentive Information Since 1915, Walman Optical has served thousands of independent eye care professionals providing solutions for all of their optical needs. Our experienced and knowledgeable team helps businesses grow while providing quality eyewear and unmatched service for an exceptional patient experience. With us, you'll bring our most advanced technology and innovative products to our partners. As a division of Walman, our collective mission is to enrich the lives of our customers, employees and the communities we serve through better vision. Walman is part of EssilorLuxottica, a global leader in the design, manufacture and distribution of world-class vision care products, including iconic eyewear, advanced lens technology and cutting-edge digital solutions. Join our global community of over 200,000 dedicated employees around the world in driving the transformation of the eyewear and eyecare industry. Discover more by following us on LinkedIn!GENERAL FUNCTION Responsible for all aspects of the Anti-Reflective (AR) Coating process to produce quality eyewear that meets customer standards. Primary responsibility is the daily operation and maintenance of the large-capacity AR coating machines and final quality inspection of outgoing lenses. The Sr Production Technician will be responsible for adhering to the company's quality and safety requirements during all operations. MAJOR DUTIES AND RESPONSIBILITIES Operate large-capacity AR coating machines. Perform daily and weekly maintenance of the vacuum coating chambers and equipment involved in the AR coating process. Keep a current and accurate log of all processes and maintenance for the machines. Perform all aspects of operation of the AR Coaters, including: Clean machine and make ready for operation. Inspect each lens for accuracy and any other defects present on lens surface. Log all scratches or other conditions found. Place lenses into appropriate tooling based on lens diameter and shape. Load lenses into AR coating machine and select correct recipe and chemicals for each different AR coating process. Perform all necessary parts change-outs and other maintenance items in a timely manner. Perform necessary quality testing on finished product. Perform final inspection on all batch coated lenses and ensure adherence to the cosmetic standards. Verify performance of coating runs and ensure coating meets desired specification. Perform troubleshooting of machine/equipment problems and work with supervisor to resolve issues. Pack completed work. Review rejected lenses and re-work or assign proper breakage codes. Sandblast machine parts as needed. Follow standard procedures while continually evaluating opportunities for improvement. Provide recommendations to improve processes to simplify jobs, eliminate non-value-added tasks and reduce costs. Effectively communicate with all levels of the organization to ensure understanding and the proper application of company policies, practices and procedures. Actively participate and engage in continuous improvement processes Maintain work area and common areas of department in a neat, clean, and organized condition. Understand and follow all company and manufacturer's policies and procedures and ensure compliance with all attendance & safety rules and regulations. Maintain confidentiality of all proprietary and HIPAA protected information. Willingly assist others as necessary to keep work current, meet deadlines or maintain an even workload. Cooperate with other employees and demonstrate a good attitude. Perform an acceptable quantity and quality of work on time as required. Provide proper training, work direction, and technical guidance for less experienced employees. Attends in-house or sponsored training meetings when necessary. Perform other duties as assigned. This position requires exposure to one or more hazardous substances/chemicals which requires safety training. BASIC QUALIFICATIONS High school diploma, GED or equivalent work experience 3+ years of manufacturing experience Ability to multi-task, orient to detail and operate in a fast-paced environment Ability to lift and/or move up to 50 pounds and lift up to 15 pounds above head. Specific vision abilities required by this job, including close vision. Pay Range: Starting Rate at $20/hour; more for experience This posting is for an existing vacancy within our business. Employee pay is determined by multiple factors, including geography, experience, qualifications, skills and local minimum wage requirements. In addition, you may also be offered a competitive bonus and/or commission plan, which complements a first-class total rewards package. Benefits may include health care, retirement savings, paid time off/vacation, and various employee discounts. EssilorLuxottica complies with all applicable laws related to the application and hiring process. If you would like to provide feedback regarding an active job posting, or if you are an individual with a disability who would like to request a reasonable accommodation, please call the EssilorLuxottica SpeakUp Hotline at ************ (be sure to provide your name, job id number, and contact information so that we may follow up in a timely manner) or email ********************************. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, national origin, social origin, social condition, being perceived as a victim of domestic violence, sexual aggression or stalking, religion, age, disability, sexual orientation, gender identity or expression, citizenship, ancestry, veteran or military status, marital status, pregnancy (including unlawful discrimination on the basis of a legally protected pregnancy or maternity leave), genetic information or any other characteristics protected by law. Native Americans in the US receive preference in accordance with Tribal Law. .job Title{ display:none !important; } Nearest Major Market: Minneapolis Job Segment: Social Media, Marketing

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Identify and implement corrective actions to minimize downtime for manufacturing-related issues. Evaluate and order essential tools and fixtures to promote safety and efficiency for production team members. Implement Lean Manufacturing initiatives and participate in continuous improvement activities. Assist with new product launches and process development. Recommend product improvements and maintain standard drawings and work instructions. Support manufacturing of custom/standard product bills, routings, and supplemental data. Provide documentation for estimating the cost of materials and labor of manufactured products. Understand product complexity and equipment requirements to select appropriate manufacturing lines/processes. Work with multi-functional team members on capital planning and acquisition projects. You have: We're looking for a proven candidate who can bring a flawless execution to our ambitious projects. The ideal candidate will possess the following: High School diploma or G.E.D. or equivalent experience; a 2-year or 4-year degree is preferred. Minimum of 2 years of experience in a manufacturing environment. Strong analytical thinking abilities. Initiative to be a self-starter and work independently with minimal supervision. Flexibility in swiftly evolving business situations and the capacity to excel in a dynamic work setting. Proficiency, or the capacity to acquire, computer software such as Microsoft Office, JD Edwards, and SolidWorks. Ability to detail processes in work instruction format. Experience in Lean Manufacturing and Continuous Improvement projects. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $20.40 - $37.80 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Reports to: Production Manager

Job Title: Electromechanical TechnicianJob Description We are seeking a skilled Electromechanical Technician to join our dynamic team. In this role, you will collaborate closely with harness designers and engineers to build and install wire harnesses on prototype systems. You will assist engineers with assembling and testing prototype electrical subsystems, as well as performing hands-on testing, troubleshooting, and maintenance of electrical systems. Your support will be crucial in diagnostics, repairs, and maintenance of electrical assemblies, as well as in maintaining the organization of our electrical lab area. Responsibilities * Collaborate with harness designers and engineers to build and install wire harnesses on prototype systems. * Assist engineers in assembling and testing prototype electrical subsystems. * Perform hands-on testing, troubleshooting, and maintenance of electrical systems. * Support engineering team members with diagnostics and repairs of electrical assemblies. * Maintain and organize the electrical lab area. * Maintain inventory and organization of laboratory supplies and order replacements as needed. Essential Skills * Experience with electromechanical systems, soldering, and wire harness. * Proficiency in using test equipment and prototyping. * Ability to perform electrical assembly and read blueprints and schematics. Additional Skills & Qualifications * Associate's degree or higher in Electrical Engineering Technology or Electronics. * Ability to read and interpret technical schematics and wiring diagrams. * Experience using oscilloscopes, multimeters, power supplies, and other standard lab equipment. * Experience with soldering and crimping. * Understanding of electrical theory, circuit design, and testing methodologies. * Proficiency in Microsoft Office. Work Environment The work environment is a laboratory setting where you will work with advanced test equipment and collaborate with a team of engineers. Expect a hands-on role that requires attention to detail and adherence to safety protocols. The dress code is casual, suitable for a lab environment. Job Type & Location This is a Contract to Hire position based out of Anoka, MN. Pay and Benefits The pay range for this position is $28.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Anoka,MN. Application Deadline This position is anticipated to close on Jan 31, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SMT Manufacturing Engineering Technician Bloomington, MN | Direct-Hire | $20-$30/hr + OT (Flexible) | 100% Onsite | 2nd shift We are seeking a hands-on, detail-oriented SMT Manufacturing Engineering Technician to support ongoing production, process improvement, and quality initiatives in a precision manufacturing environment. This role plays a key part in troubleshooting equipment, validating tooling setups, and supporting engineering with documentation, testing, and layout activities. It's an ideal opportunity for someone with strong technical aptitude and a collaborative mindset. POSITION RESPONSIBILITIES: Set up and troubleshoot SMT production equipment and fixtures, assisting with maintenance, test stands, and tooling validation to ensure uptime and consistency. Collaborate with manufacturing and engineering teams to execute equipment qualifications, process validations, and new tooling trials. Assist with drafting, revising, and releasing work instructions, quality documentation, and test procedures. Support fixture and equipment development by coordinating with vendors, ordering parts, and overseeing timely build and testing. Use precision measurement tools to conduct part layouts and dimensional verification, reporting results to engineering. Maintain tooling and gauge records, track equipment performance, and ensure calibration documentation is up to date. Contribute to root cause analysis and corrective action plans for process or product issues, participating in MRB and failure investigations. Support lean initiatives on the production floor by identifying improvement opportunities and collaborating on waste-reduction efforts. REQUIRED QUALIFICATIONS: Associate degree in Mechanical, Manufacturing, or related Engineering Technology field or equivalent experience. 3+ years of hands-on experience in a manufacturing environment. Proficiency with mechanical measurement tools (calipers, micrometers, height gauges, etc.). Experience supporting validation, process improvement, and test documentation. Ability to interpret engineering drawings and schematics. PREFERRED QUALIFICATIONS: Familiarity with 3D CAD systems such as SolidWorks or AutoCAD. Exposure to lean manufacturing tools or quality systems (ISO 9001, 8D, FMEA, etc.). Ability to work independently on test setups, equipment troubleshooting, and layout tasks. BENEFITS: Competitive salary with performance-based incentives PTO and paid holidays Medical, dental, and vision coverage 401(k) with company match Ongoing training and professional development opportunities Be the first to learn about future positions by joining our Newsletter and following us on LinkedIn! Konik is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other protected class status. Konik has been creating impactful relationships between technical talent and employers for more than 50 years. Konik has specialized in placing professional, qualified personnel in Minnesota and western Wisconsin businesses since its inception, and maintains a strong commitment to customer service.

Job Description We are seeking a dedicated Manufacturing Engineering Technician to enhance our production processes. This role involves collaborating closely with Manufacturing Engineers and production teams to optimize manufacturing operations. Key responsibilities include troubleshooting equipment and process issues, maintaining equipment, and updating process documentation. The technician will also support engineers in project development by building or procuring test equipment and conducting tests, including process validations. Key Responsibilities: Develop and revise production documentation, such as travelers, routings, drawings, work and inspection instructions, and BOMs, ensuring the availability of accurate information for quality product assembly. Assist in improving manufacturing methods and procedures, including drafting change orders and deviations. Program production equipment effectively. Identify and resolve process, material, or equipment issues, offering solutions to minimize downtime. Design, assemble, procure, or modify tooling, fixtures, and equipment for efficient production methods. Schedule, perform, and document routine maintenance on manufacturing and testing equipment. Collaborate and communicate effectively with colleagues at various organizational levels. Contribute to team success by undertaking additional tasks as necessary. Qualifications and Skills: Associate Degree in Engineering Technology or a related field, or equivalent education and experience. Strong communication skills and the ability to work well both independently and within a team. Proficiency in computer software, including Microsoft Office Suite (Word, Excel, Outlook), SolidWorks or similar, and Altium or similar. Knowledge of electronics industry standards (IPC-A-610, J-STD-001, IPC-A-620) is preferred. Familiarity with lean methodology is advantageous. Hands-on problem-solving capabilities and a self-motivated, self-directed approach. Ability to pass a background check and drug screening. Physical Requirements: Ability to perform computer and desk work for extended periods. Capability to perform machine and production-related tasks, requiring good hand/finger dexterity and eyesight. Ability to lift and carry up to 25 pounds. #hc197148

Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, MN Manufacturing Technician (Union Environment) Department: Production The Manufacturing Technician positions work with team members to meet production goals. Performs activities related to Assembly, Lamination, or Winding in a manufacturing environment, while adhering to all safety standards. Requirements: High school diploma preferred but not required. Major Areas: Assembly; responsible for the assembly of motor, generators and drives. Lamination; responsible for assembling laminated subassemblies for stator winding, pole winding, exciter winding and rotor assembly. Winding; performs the setup, layout, winding, connecting, testing and troubleshooting of electrical AC or DC rotating equipment. Salary: 1st Shift; salary range $20.00 hourly to $24.00 hourly 2nd Shift salary range $20.00 hourly to $24.00 hourly (plus $2.00/hour differential) Will compensate with experience. Position is full-time. Skills Matrix: Skills and advancement within the department is documented via the Skills Matrix. The skills matrix outlines the skills Assembly, Lamination, and Winding, an opportunity to increase your salary. Pay Types: Voluntary weekend overtime; Saturday is paid at time and half; and Sundays are paid at double time! Job Type: Monday Friday, 1st shift 7:00 a.m. - 3:30 p.m. Monday Friday, 2nd shift 3:30 p.m. - 12:00 a.m. Full-time (Union) Benefits: Medical, Dental & Vision Insurance eligible your 1st day on the job 401K with Match 1st month following hire Quarterly Bonus Program payout potential Company paid Holidays (12) and Paid Birthday (1) (use anytime throughout the year) Paid Time Off (PTO) available immediately Company paid Short- & Long-Term Disability Company paid Life Insurance $6,000 annual Tuition Reimbursement program Company provided tools Company provided uniforms (laundered) Company reimbursement for Safety Shoes & Safety Glasses Secure, onsite free parking Physical Requirements: Routinely lifts and moves objects up to 20 lbs. Occasionally lifts and moves objects up to 50 lbs. Routinely ascends/descends ladders and stairs. Occasionally works at heights or on platforms. Occasionally positions self in various works spaces, including low, tight or confined spaces. Routinely remains in a stationary position, often standing or sitting for prolonged periods of time. Routinely uses repetitive motions including the wrists, hands or fingers to operate machinery or tools. Occasionally moves from one work station to another to accomplish tasks. Company cannot provide sponsorship for this position Please, no agencies

Senior Production Technician Location: Eden Prairie, MN Job Title: Senior Production Technician Department: Operations Reports to: Director of Manufacturing Pay Range: $50,000.00 to $80,000.00 Salary - based on experience Position Type and Expected Hours of Work: Full-Time, Monday-Friday, 40 hours/week About Elucent Medical: Elucent Medical is a medical device company focused on developing surgical navigation technologies, particularly for cancer surgery, to improve patient outcomes through precision and efficacy. The company's solutions are designed to transform traditional surgical instruments into "smart" tools, enhancing surgical precision and patient outcomes. Job Summary: The Senior Production Technician will investigate and conduct root cause failure mode analysis on the Elucent navigation system, which consists of an electromechanical chassis, computer, display, and an electrical patient pad. This will require understanding assembly drawings, electrical schematics manufacturing procedures, as well as the ability to trace the interaction of software programming with hardware functionality. This will also require using equipment such as soldering equipment, electrical test equipment (oscilloscope, multi-meter), vision systems, and standard mechanical tools for assembly. Supervisory Responsibilities: None. Job Responsibilities: Investigation and identification of root cause for non-conforming systems. Evaluation of returned capital assets for potential repairs and necessary upgrades as part of the depot service repair activities. Assist manufacturing engineering with process improvements, fixture development, and equipment maintenance and validations. Provide overflow capacity for standard production activities by assisting with capital asset builds, production release testing, and crating for shipment. Assist with experimentation and evaluation of new designs, processes, and software revisions. Qualifications Education and Experience: 5+ years of Production Technician experience. GED of HS diploma, preferred Associates or Technical degree Medical device experience required. Electrical experience required. Extensive solder experience required. Startup, small business experience preferred. Required Skills/Abilities: Ability to work independently to troubleshoot non-conforming capital systems and sub-components. Identify root cause failure modes. Self-starter who can thrive in a fast-paced environment. Creative troubleshooting with minimal guidance from engineering. Physical Requirements / Work Conditions: Lift 55 lbs, stand 4 hrs. Light Manufacturing. Elucent Medical Benefits, Culture and Work Environment At Elucent Medical, we prioritize our employees' well-being by providing comprehensive benefits including comprehensive health insurance, a generous retirement savings plan with company matching, flexible work arrangements, generous paid time off, and ongoing professional development opportunities, ensuring a fulfilling and balanced work life. Fulltime Employees are provided: 401(k) 401(k) matching (4%) Dental insurance Health insurance Vision insurance Paid Holidays Paid Vacation Days Paid Sick Days Short Term Disability Long Term Disability Life Insurance Pet Insurance Employee Assistance Programs Affirmative Action / EEO Statement Elucent Medical provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Requisition ID: 913352 Store #: WM0029 Optical Coating BPARK Position: Full-Time Total Rewards: Benefits/Incentive Information Since 1915, Walman Optical has served thousands of independent eye care professionals providing solutions for all of their optical needs. Our experienced and knowledgeable team helps businesses grow while providing quality eyewear and unmatched service for an exceptional patient experience. With us, you'll bring our most advanced technology and innovative products to our partners. As a division of Walman, our collective mission is to enrich the lives of our customers, employees and the communities we serve through better vision. Walman is part of EssilorLuxottica, a global leader in the design, manufacture and distribution of world-class vision care products, including iconic eyewear, advanced lens technology and cutting-edge digital solutions. Join our global community of over 200,000 dedicated employees around the world in driving the transformation of the eyewear and eyecare industry. Discover more by following us on LinkedIn!GENERAL FUNCTION Responsible for all aspects of the Anti-Reflective (AR) Coating process to produce quality eyewear that meets customer standards. Primary responsibility is the daily operation and maintenance of the large-capacity AR coating machines and final quality inspection of outgoing lenses. The Sr Production Technician will be responsible for adhering to the company's quality and safety requirements during all operations. MAJOR DUTIES AND RESPONSIBILITIES Operate large-capacity AR coating machines. Perform daily and weekly maintenance of the vacuum coating chambers and equipment involved in the AR coating process. Keep a current and accurate log of all processes and maintenance for the machines. Perform all aspects of operation of the AR Coaters, including: Clean machine and make ready for operation. Inspect each lens for accuracy and any other defects present on lens surface. Log all scratches or other conditions found. Place lenses into appropriate tooling based on lens diameter and shape. Load lenses into AR coating machine and select correct recipe and chemicals for each different AR coating process. Perform all necessary parts change-outs and other maintenance items in a timely manner. Perform necessary quality testing on finished product. Perform final inspection on all batch coated lenses and ensure adherence to the cosmetic standards. Verify performance of coating runs and ensure coating meets desired specification. Perform troubleshooting of machine/equipment problems and work with supervisor to resolve issues. Pack completed work. Review rejected lenses and re-work or assign proper breakage codes. Sandblast machine parts as needed. Follow standard procedures while continually evaluating opportunities for improvement. Provide recommendations to improve processes to simplify jobs, eliminate non-value-added tasks and reduce costs. Effectively communicate with all levels of the organization to ensure understanding and the proper application of company policies, practices and procedures. Actively participate and engage in continuous improvement processes Maintain work area and common areas of department in a neat, clean, and organized condition. Understand and follow all company and manufacturer's policies and procedures and ensure compliance with all attendance & safety rules and regulations. Maintain confidentiality of all proprietary and HIPAA protected information. Willingly assist others as necessary to keep work current, meet deadlines or maintain an even workload. Cooperate with other employees and demonstrate a good attitude. Perform an acceptable quantity and quality of work on time as required. Provide proper training, work direction, and technical guidance for less experienced employees. Attends in-house or sponsored training meetings when necessary. Perform other duties as assigned. This position requires exposure to one or more hazardous substances/chemicals which requires safety training. BASIC QUALIFICATIONS High school diploma, GED or equivalent work experience 3+ years of manufacturing experience Ability to multi-task, orient to detail and operate in a fast-paced environment Ability to lift and/or move up to 50 pounds and lift up to 15 pounds above head. Specific vision abilities required by this job, including close vision. Pay Range: Starting rate at $18/hour; higher for experience. Plus shift differntial for overnight work! This posting is for an existing vacancy within our business. Employee pay is determined by multiple factors, including geography, experience, qualifications, skills and local minimum wage requirements. In addition, you may also be offered a competitive bonus and/or commission plan, which complements a first-class total rewards package. Benefits may include health care, retirement savings, paid time off/vacation, and various employee discounts. EssilorLuxottica complies with all applicable laws related to the application and hiring process. If you would like to provide feedback regarding an active job posting, or if you are an individual with a disability who would like to request a reasonable accommodation, please call the EssilorLuxottica SpeakUp Hotline at ************ (be sure to provide your name, job id number, and contact information so that we may follow up in a timely manner) or email ********************************. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, national origin, social origin, social condition, being perceived as a victim of domestic violence, sexual aggression or stalking, religion, age, disability, sexual orientation, gender identity or expression, citizenship, ancestry, veteran or military status, marital status, pregnancy (including unlawful discrimination on the basis of a legally protected pregnancy or maternity leave), genetic information or any other characteristics protected by law. Native Americans in the US receive preference in accordance with Tribal Law. .job Title{ display:none !important; } Nearest Major Market: Minneapolis Job Segment: Social Media, Marketing

Reports to: Production Manager The technical services group is responsible for the assembly, integration, testing, installation, maintenance, training and support of the Avonix industrial x-ray imaging systems. Area of responsibilities are divided into levels. Levels 1, 2, and 3 primarily focus on factory production. Level 4 supports final production testing and focuses on installation, maintenance and customer support. Areas of Responsibility - Level 2: Will include, but not limited to the following: Assembly of mechanical and electrical subcomponents. Integration of subcomponents Machine build. Electrical wiring and terminations. Quality inspections. Basic machine startup and trouble shooting. PLC program loading, testing and trouble shooting. Motion controller programming, testing and trouble shooting. Assist with system installations. Approximate 90% factory production work / 10% field installations. Other duties as assigned. Required Knowledge, Skills, and Abilities: Alignment with the Avonix ACE core values. Basic knowledge of general mechanical assembly. Basic knowledge of general electrical assembly and circuits. Average computer skills. Basic understanding of PLC programming or the ability to learn and master the skill. Basic understanding of motion programming or the ability to learn and master the skill.. Ability to effectively communicate with Avonix employees, customers and management in a professional manner. Ability to provide technical solutions with a high degree of professionalism. Self-motivated, well organized and attention to detail. Strong mechanical and electrical aptitude with a strong desire to learn and succeed. Education and Experience: Two years' experience in related assembly or machine build technology. Certificates, License, Registrations: US Citizen, Green Card holder or equivalent.

Job Title: Electromechanical TechnicianJob Description We are seeking a skilled Electromechanical Technician to join our dynamic team. In this role, you will collaborate closely with harness designers and engineers to build and install wire harnesses on prototype systems. You will assist engineers with assembling and testing prototype electrical subsystems, as well as performing hands-on testing, troubleshooting, and maintenance of electrical systems. Your support will be crucial in diagnostics, repairs, and maintenance of electrical assemblies, as well as in maintaining the organization of our electrical lab area. Responsibilities * Collaborate with harness designers and engineers to build and install wire harnesses on prototype systems. * Assist engineers in assembling and testing prototype electrical subsystems. * Perform hands-on testing, troubleshooting, and maintenance of electrical systems. * Support engineering team members with diagnostics and repairs of electrical assemblies. * Maintain and organize the electrical lab area. * Maintain inventory and organization of laboratory supplies and order replacements as needed. Essential Skills * Experience with electromechanical systems, soldering, and wire harness. * Proficiency in using test equipment and prototyping. * Ability to perform electrical assembly and read blueprints and schematics. Additional Skills & Qualifications * Associate's degree or higher in Electrical Engineering Technology or Electronics. * Ability to read and interpret technical schematics and wiring diagrams. * Experience using oscilloscopes, multimeters, power supplies, and other standard lab equipment. * Experience with soldering and crimping. * Understanding of electrical theory, circuit design, and testing methodologies. * Proficiency in Microsoft Office. Work Environment The work environment is a laboratory setting where you will work with advanced test equipment and collaborate with a team of engineers. Expect a hands-on role that requires attention to detail and adherence to safety protocols. The dress code is casual, suitable for a lab environment. Job Type & Location This is a Contract to Hire position based out of Anoka, MN. Pay and Benefits The pay range for this position is $28.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Anoka,MN. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

We are seeking a dedicated Manufacturing Engineering Technician to enhance our production processes. This role involves collaborating closely with Manufacturing Engineers and production teams to optimize manufacturing operations. Key responsibilities include troubleshooting equipment and process issues, maintaining equipment, and updating process documentation. The technician will also support engineers in project development by building or procuring test equipment and conducting tests, including process validations. Key Responsibilities: Develop and revise production documentation, such as travelers, routings, drawings, work and inspection instructions, and BOMs, ensuring the availability of accurate information for quality product assembly. Assist in improving manufacturing methods and procedures, including drafting change orders and deviations. Program production equipment effectively. Identify and resolve process, material, or equipment issues, offering solutions to minimize downtime. Design, assemble, procure, or modify tooling, fixtures, and equipment for efficient production methods. Schedule, perform, and document routine maintenance on manufacturing and testing equipment. Collaborate and communicate effectively with colleagues at various organizational levels. Contribute to team success by undertaking additional tasks as necessary. Qualifications and Skills: Associate Degree in Engineering Technology or a related field, or equivalent education and experience. Strong communication skills and the ability to work well both independently and within a team. Proficiency in computer software, including Microsoft Office Suite (Word, Excel, Outlook), SolidWorks or similar, and Altium or similar. Knowledge of electronics industry standards (IPC-A-610, J-STD-001, IPC-A-620) is preferred. Familiarity with lean methodology is advantageous. Hands-on problem-solving capabilities and a self-motivated, self-directed approach. Ability to pass a background check and drug screening. Physical Requirements: Ability to perform computer and desk work for extended periods. Capability to perform machine and production-related tasks, requiring good hand/finger dexterity and eyesight. Ability to lift and carry up to 25 pounds.