Manufacturing technician jobs in Melbourne, FL

Project Kuiper is Amazon's low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. The processing technician will work as part of a team for receiving the hardware, processing satellites into the cleanroom, perform electrical test validation and battery charging, and other movements of the spacecraft through the workzone. The satellite operations consist of using with tools and equipment like overhead cranes and forklifts. The electrical test consists of operating a power supply system and requesting/reviewing data from the spacecraft. This individual with work closely with their peers and lead, engineers, and other cross-functional organizations. The ideal candidate is comfortable in a highly technical, fast-paced, and collaborative setting; is able to follow technical work instructions; and support the team through processing operations. Key job responsibilities Adhere to safety requirements, standards and procedures in all work locations. Final assembly and test of the Kuiper satellites using various ground systems in a clean-room and Electrostatic Discharge (ESD) controlled environment. Verify satellite health using computer-controlled equipment to command and monitor satellite telemetry. Execute work assigned individually and/or with the team to meet production schedule. Use precision calibrated tools - torque wrenches, micrometers, and calipers. Use electrical test equipment tools -- multi-meters, breakout boxes, and harnesses. Perform overhead crane lift operations and use pallet jacks and forklifts for hardware movement. Perform work according to engineering drawings and technical work instructions. Check and inspect work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements. Collaborate with leads, peers, and engineers to improve processes and activities. Perform other duties, as assigned, to ensure an efficient, safe and effective work environment. Able to obtain and maintain licenses, and/or certifications as required by job responsibilities (i.e. forklift, crane, electrical). Mentor new and junior team members, as needed. Willing to work overtime and weekends as required. Shift schedule is nominally 5 days/week, 8 hours/day but may vary depending on production/launch schedules. Must be willing and able to perform extended travel up to 25% annually, either domestically or internationally as business needs demand. A day in the life The processing technician will meet with their team leads to understand objectives for the day. They will be processing satellites with mechanical and electrical ground support equipment per work instructions provided by engineering. They will document completed work and report non-conformances to their leads and engineering as they occur. Periodically, they will perform maintenance on the ground and facility systems supporting satellite movements. They will be expected to cross train with all other launch operations work areas, including mechanical areas, to support work surges and travel to other launch sites. About the team Here at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we're building an environment that celebrates knowledge sharing and mentorship. Basic qualifications : • High school diploma, GED, or equivalent experience. • 3+ years in spaceflight hardware testing and assembly. • Ability to work effectively in a collaborative team environment. • Able to obtain and maintain a US Passport & must meet customs entry requirements to include but not limited to: Yellow Fever vaccine and other immunization requirements as recommended by the U.S. Centers for Disease Control and Prevention. • Ability to pass Kennedy Space Center background check. Preferred qualifications : • Experience as a team or task lead. • Experience working with electrically energized systems. • Experience in a fast-paced processing environment. • Experience working with Foreign Object Debris (FOD), ESD sensitive hardware, and in a clean room. • Experience with forklifts, cranes, rigging, and heavy equipment (including previous certifications). • A demonstrated ability in reading/understanding technical drawings, work instructions and standard operating procedures. Additional Requirements: • Able to stand/walk for long periods of time. • Able to climb ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position. • Able to lift at least 25 lbs. unassisted. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $70,720/year in our lowest geographic market up to $76,960/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Teledyne Marine is a group of leading-edge undersea technology companies that have been assembled by Teledyne Technologies Incorporated. Through acquisitions and collaboration, over the past 10 years Teledyne Marine has evolved into an industry powerhouse, bringing the best of the best together under a single umbrella. With technologies divided into 5 core segments; Imaging, Instruments, Interconnect, Seismic and Vehicles, Teledyne Marine sales staff can address not only brand level solutions, but turn-key, customized systems that leverage our full range of technology. Our goal is to provide one-stop purchasing capability, world-wide customer support, and the technical expertise to solve our customer's toughest challenges. A Sea of Solutions…..One Supplier. For more information, visit our website at *********************** This position is responsible for assembling electrical and fiber optic jumper and cable assemblies utilizing various mechanical and hand tools. Essential Duties and Responsibilities: * Measure, cut, prepare rubber hose, cable, wire for termination * Pull wire through hose ID and any attached hardware prior to soldering * Terminate hose and cable assemblies with machined hardware per procedure * Stretch jumper assemblies utilizing a forklift and load meter * Accurately report labor hours for each order * Ability to troubleshoot issues with little to no engineering support * Maintaining security for all quality verification equipment and its calibration control * Notify errors on procedures, drawings, bills of material, and router to the support teams (Quality, Manufacturing Engineering). * Responsible for completing documentation accurately and timely * Responsible for entering data into the IFS system accurately and timely * Responsible for maintaining high quality standards and workmanship * Maintain excellent communication and working relationship with all departments within the company * Communicating special tooling needed to perform operation that may have not been identified * Adhere to all safety procedures and maintain a safe working environment Education and Experience: * HS Diploma or GED * Two year technical degree preferred * Recent experience in a mechanical, electrical or production trade * Recent experience in a manufacturing environment Job Knowledge, Skills and Abilities: * Ability to work safely with minimal or no direct supervision * Ability to accurately read a tape measure * Ability to work outside for several hours during various weather conditions * Ability to stand for several hours * Ability to use hands in a continuous motion for several minutes at a time * Ability to work with changing demands in a fast paced environment * Ability to work from verbal directions * Common sense approach to troubleshooting * Ability to learn rapidly in an engineer to order production facility * Excellent communication skills with both internal and external customers * Ability to use mechanical and pneumatic tools required to assemble Teledyne specific product * Able to read technical drawings and electrical schematics, specifications and procedures * Computer Literate Working knowledge of MS Office programs, i.e., Word, Excel, Outlook * Ability to take constructive feedback from peers, leads and / or managers * Good shop math skills Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees). What can Teledyne offer YOU? A Competitive Salary & Benefits Package Excellent Health, Dental, Vision Paid Vacation Time Paid Sick Time Life Insurance Benefits Paid Holidays 401(k) Eligibility Employee Stock Purchase Plan Fitness Challenges Educational Tuition Reimbursement Employee Fun Events throughout the year Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANUFACTURING RELIABILITY SPECIALIST, HEAT SHIELD (STARSHIP) The Manufacturing Specialist is responsible for developing and sustaining a machinery maintenance plan and maximizing equipment uptime in a high-production-rate environment. The Specialist works with a multidisciplinary team of industrial and automation engineers, production and automation technicians, sourcing, supply chain, and suppliers, setting up standards and trends for maintenance directions, spare parts, and recommended execution/instructions to ensure high machinery reliability. RESPONSIBILITIES: Partner with design and process engineering, and manufacturing teams to create maintenance plans for new machines installed on the shop floor Understand and react to engineering and suppliers' recommendations and directions for maintenance plans Give visibility of machinery up and downtime to ensure that corrective actions are being taken to improve machinery reliability Champion maintenance tickets, training, and execution by technicians and production teams Understand machinery trends and implement new plans to support machinery uptime Understand process and product changes that can impact machinery reliability plans and react accordingly Champion and foster good usage of maintenance tickets and asset management software; train technicians and engineers to properly use available systems to control machine reliability Develop machinery key performance indicators to support day-to-day operations Ensure spare parts are properly created in the systems, generating a good replenishment system to allow quick turnaround for maintenance execution Work hand-in-hand with supervisors and production planning to ensure technicians' execution of the preventive maintenance plan; make sure that proper downtimes are planned to allow for machinery preventive maintenance Develop predictive maintenance with process engineers by ensuring critical assets have proactive methods to identify potential problems Conduct regular reviews for open maintenance tickets and ensure good usage of available tools Conduct regular review of indicators with engineering and production management about trends and recommended actions in the shop floor related to machines Ensure the right tools and fixtures are available for technicians to perform all work necessary to be done on machines on the shop floor Be an active agent of continuous improvement actions that will directly impact the process and production through new systems, methodologies, and means to increase machine reliability BASIC QUALIFICATIONS: High school diploma or equivalency certificate 5+ years of professional experience maintaining manufacturing equipment PREFERRED SKILLS AND EXPERIENCE: Bachelor's degree in an engineering discipline Experience developing or supporting any of the following products/processes: mechanical/structural assemblies, fluid component/valve assembly Experience with CNC machining, forming, and bending Exposure to bonding, drilling, fastening, and other assembly manufacturing processes Knowledge of fluid systems, pumps, and related applications Knowledge and understanding of welding Strong interpersonal and collaborative skills, enthusiasm for the team's spirit of innovation, and mission of improving reliability in cutting-edge technology Demonstrated experience in implementing and controlling maintenance systems Demonstrated application of process controls in high volume manufacturing, test, and quality environment Dedicated to adopting a Lean approach to quality without compromising safety or reliability Knowledge of quality tools such as Lean principles, measurement systems analysis, design of experiments, statistical process control, root cause analysis and corrective action, process failure mode and effects analysis (PFMEA), control plans, and various problem-solving approaches Computer skill sets such as SQL, Microsoft Office, or other electronic systems ADDITIONAL REQUIREMENTS Ability to pass Air Force background check for Cape Canaveral Ability to work extended hours, weekends, and offsite as needed Must be willing to travel for business and operational needs, travel requirement is up to 15% ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to ************************ .

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is seeking an Associate Manufacturing Engineer / Manufacturing Engineer. This position will be located at our Aeronautics Systems Sector in Melbourne, FL. The qualified candidate will become part of Northrop Grumman's Production Engineering & Operations (PE&O) organization. The shifts available for this role are one of the following work schedules: 4/10A 1st or 2nd shift (10 hr/day Monday - Thursday) 4/10B 1st or 2nd shift (10 hr/day Tuesday - Friday) 3/10 1st or 2nd shift (10 hr/day Friday - Sunday) 9/80 1st or 2nd shift Roles and Responsibilities: Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations. This requisition may be filled at either an Associate Manufacturing Engineer (T01) or Manufacturing Engineer (T02). Basic Qualifications for a Associate Manufacturing Engineer (T01): A candidate, regardless of age and hiring source, must meet ALL of the below criteria. The candidate must: Be completing or has completed their Bachelor's degree from an accredited institution by May 2026. Be majoring in or having majored in a Manufacturing Engineering, Mechanical Engineering, Manufacturing Technology, Electrical Engineering, Aerospace Engineering, or related STEM degree. Ability to work any shift or extended work week as business need requires. Be able to obtain and maintain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special access within a reasonable period of time, as determined by the company to meet its business needs (U.S. citizenship is a pre-requisite). Final approved U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special Access may be required to start. Basic Qualifications for a Manufacturing Engineer (T02): A candidate, regardless of age and hiring source, must meet ALL of the below criteria. The candidate must: Be completing or has completed their Master's degree from an accredited institution by May 2026 or is completing their Bachelor's degree from an accredited institution by May 2026 and 1 year of Manufacturing engineering experience. Be majoring in or having majored in a Manufacturing Engineering, Mechanical Engineering, Manufacturing Technology, Electrical Engineering, Aerospace Engineering, or related STEM degree. Ability to work any shift or extended work week as business need requires. Be able to obtain and maintain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special access within a reasonable period of time, as determined by the company to meet its business needs (U.S. citizenship is a pre-requisite). Final approved U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special Access may be required to start. Preferred Qualifications for both an Associate Manufacturing Engineer / Manufacturing Engineer: Have an overall cumulative GPA of 3.25/4.0 or higher Previous internship/co-op or other work experience, leadership & teamwork capabilities, interpersonal communication skills, and activities (professional/community/extracurricular). Fabrication, Assembly, GD&T, process improvement, CAD modeling, machining experience. Shop Floor Liason, Cable Harness Fabrication/Assembly experience. Creating and updating work instructions experience. Active U.S. Government security clearance. Pay Range Associate Manufacturing Engineer: $58,200 - $87,200 Manufacturing Engineer: $70,200 - $105,400 Campusjobs The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

The Manufacturing Technician will sustain existing products in Manufacturing and support the transfer of new electro-mechanical product designs from R&D to Manufacturing. Key Areas of Responsibility: Support troubleshooting of Electro-Mechanical systems performs failure analysis. Performs rework and modifications to hardware including PCBs (thru-hole and SMT), wire harnesses, and electro-mechanical assemblies. Supports Engineering Change Orders (ECOs) with product testing, validation, and documentation updates. Confirms quality of parts and assemblies for Manufacturing providing information to quality department for disposition. Maintains and improves (Kaizen) manufacturing processes and documentation (work instructions, process plans). Designs and builds basic tooling and fixtures to aide in Manufacturing. Knowledge, Skills and Abilities: Associate degree or vocational training in Electronics 3+ years' experience in manufacturing environment (mechanical assembly a plus). Must be able to review and understand written procedures and technical. IPC 610 or 620 Training or certification Experience working with sheet metal, plastics, adhesives, conductive coatings, PCBAs, Wiring Harnesses, and soldering Experience with the use of test programs, digital multimeters, signal generators and specialized test apparatus in the diagnostics and testing of assemblies. Experience with assembly, testing, and troubleshooting Motion Control Systems is a plus Proper working knowledge of ESD (Electrostatic Discharge) Proficient computer skills including the use of Microsoft Office products

**Company:** NextEra Energy **Requisition ID:** 91677 NextEra Energy Resources is one of America's largest wholesale electricity generators, harnessing diverse energy sources to power progress. We deliver tailored energy solutions that fuel economic growth, strengthen communities, and help customers achieve their energy goals. Ready to make a lasting impact? Take the next step in your career with us! **Position Specific Description** We are currently seeking a qualified individual for the position of Production Technician. This is an operations position that requires shift work. 12 hour rotating shifts 0600 to 1800, and 1800 to 0600. The selected candidate for this position will be responsible for operating a combined cycle power plant in Orlando, Florida and a simple cycle power plant in Cocoa, Florida. Other duties will include maintaining and repairing electrical and mechanical equipment. + Two years power plant, industrial turbine, or equivalent military experience is required. + Combined cycle operations experience is highly desirable. + Practical knowledge of the both the Rankine and Brayton operating cycles is desirable. + Experience with a computer maintenance management system (like Maximo) is desirable. + Experience with GE MK and Emerson Ovation control systems desirable. + Electrical maintenance and troubleshooting experience desirable. **Job Overview** Employees in this position perform power plant operations as well as maintenance on station equipment. **Job Duties & Responsibilities** Under general supervision: + Repairs and calibrates equipment + Monitors equipment performance through testing + Applies general electrical, mechanical, or I and C skills + Performs other job-related duties as assigned **Required Qualifications** + High School Grad / GED + Experience: 2+ years + Valid Driver's License (NON-CDL) **Preferred Qualifications** + None NextEra Energy offers a wide range of benefits to support our employees and their eligible family members. Clickto learn more. **Employee Group:** Non Exempt **Employee Type:** Full Time **Job Category:** Technicians **Organization:** NextEra Energy Operating Services, LLC **Relocation Provided:** No NextEra Energy is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to race, color, age, national origin, religion, marital status, sex, sexual orientation, gender identity, gender expression, genetics, disability, protected veteran status or any other basis prohibited by law. NextEra Energy provides reasonable accommodation in its application and selection process for qualified individuals, including accommodations related to compliance with conditional job offer requirements, consistent with federal, state, and local laws. Supporting medical or religious documentation will be required where applicable and permitted by applicable law. To request a reasonable accommodation, please send an e-mail to, providing your name, telephone number and the best time for us to reach you. Alternatively, you may call **************. Please do not use this line to inquire about your application status. NextEra Energy will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. NextEra Energy **does not** accept any unsolicited resumes or referrals from **any third-party recruiting firms or agencies** . Please see ourfor more information. \#LI-ES1

Performs the set-up, calibration, and testing of circuits, components, instruments and electromechanical assemblies. Works from diagrams, written and verbal descriptions, layouts or defined plans to test, diagnose and troubleshoot assemblies and/or final systems including fault isolation on systems and equipment. Uses manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs, digital multimeters, signal generators and specialized test apparatus in the diagnostics and testing of assemblies. May assist in the selection and set-up of specialized test equipment. May assist with root cause analysis of product failure modes. May perform simple repairs or component removal or replacement. Experience Requirement • Ensure compliance with all safety and regulatory requirements. • Quality minded/focused individual. • Performs visual inspection of components before assembly or test. • Perform self-inspection of work completed before moving to the next step. • Ability to navigate through computer and test software • Knowledge of basic electronics theory. • Ability to identify electronic components, their function, and proper placement on a PCB. • Experienced with Test equipment, including DMM (Digital Multi Meter) and oscilloscope • Experience in troubleshooting of failed units. • Maintain accurate and organized documentation and ensure clarity, consistency, and compliance with the company's CMS standards. • Must be a self-starter with the ability to complete assignments on time. • Team member/leader experience on quality, delivery, or cost project(s) is a plus. • Knowledge and experience in 6S and process improvement • Maintains a clean and orderly work area. • Ability to work in a fast-paced environment. • Able to work overtime as required. • Experience in an ISO/FDA/FAA work environment. • Flexible with work assignments. • Other duties as assigned by the team leader/manager. Must demonstrate strong decision-making and leadership skills. • Experience in handling delicate components using ESD practices. • Must have good hand and eye coordination. • AS in Electronic Technology but not required, or 2 years of equivalent experience Physical Requirement Performing General Physical Activities - Sitting for long periods of time. Performing physical activities that require considerable use of your arms and legs and occasionally moving your whole body repeatedly, such as walking and balancing. May be able to lift a maximum of 55 lbs. Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things in a certain order or pattern according to a specific rule or set of rules. The ability to see details at close range (within a few feet of the observer).

Job Description Manufacturing Assembler / Operator Kalogon, an early stage startup based in Melbourne, seeks a full-time Manufacturing Operator to join our growing team. This role is ideal for someone who enjoys variety in their work - assembling products, maintaining and improving machines, and helping develop new operations. The ideal candidate is a hands-on problem solver who thrives in a fast-paced, casual environment where no two days are the same. Key Responsibilities: Build complex and innovative medical products with a mix of electronics assembly, machining, 3D printing, and soft-goods manufacturing. Work with precision and adaptability Independently complete each of the operations and assemblies which goes into each completed product. Contribute to process improvements aimed at reducing cycle time, improving consistency, and raising product quality. Collaborate with R&D on prototypes and pilot builds, providing hands-on feedback to refine designs for manufacturability. Required skills: Strong mechanical aptitude with the ability to quickly learn and adapt to new tools, machines, and processes. Problem-solving mindset: able to diagnose issues, think on your feet, and create practical solutions. Able to meet production deadlines while meeting quality standards Preferred: background in small-scale manufacturing, prototyping, or other hands-on technical environments (e.g. maker, technician, machinist, or fabrication experience). Qualifications: High school diploma or equivalent. Ability to work independently and follow written instructions and procedures. Basic computer literacy and ability to complete digital forms or reports. Positive attitude, strong work ethic, and a team-focused mindset. Work Environment: Air-Conditioned Environment Casual Fast paced Interesting, with lots of variety Area of work - Near I-95 and Sarno in Melbourne, FL Opportunities for overtime are available Probationary period: 3 months Benefits: 8 holiday days (5 fixed and 3 floating) 20 PTO days 401k Stock Options Reports To: Production Manager Powered by JazzHR DCaDWRk5CJ

This position can be filled as a Water Treatment Plant Operator Trainee, C, B or A. Pay will be commensurate with the level of license held. Water Treatment Plant Operator Trainee - Salary Range $21.42 - $34.38/Hourly DOQ Water Treatment Operator C - Salary Range $24.69 - $40.47/Hourly DOQ Water Treatment Operator B - Salary Range $25.74 - $42.23/Hourly DOQ Water Treatment Operator A - Salary Range $26.83- $44.06/Hourly DOQ Under the supervision of the Operations Supervisor and the direction of an assigned Certified Operator, performs entry level work in the operation and maintenance of water treatment facilities and equipment. Work involves on-the-job training related to the maintenance of a water plant. Work is performed under close supervision. The supervisor provides instructions about procedures to be followed and training tasks to be performed and standards to be maintained. Work is reviewed periodically during the training period to note progress. Performs other work as required. Examples of Duties * Participates in an on-the-job training program involving practical, "hands- on" experience with plant operations under the supervision of a Water Production plant supervisor and/or a Certified Operator; reads and comprehends a variety of technical laboratory, operations, and maintenance procedures. * Starts and stops machinery and pumps via supervisory control and data acquisition system, regulates valves and observes instrumentation; adds chemicals according to prescribed standards. * Collects and analyzes various samples periodically and reports results; maintains simple records. * Performs cleanup work on equipment and daily/weekly assigned housekeeping duties. * Assists certified operator in all work and duties required in water treatment plant operations. Minimum Qualifications * High School diploma or G.E.D. (Proof must be uploaded with application). * Water Treatment Operator Trainee Qualifications: High School diploma or GED. Must have working knowledge of nomenclature of water treatment devices. A knowledge test will be given to all applicants whose applications meet all minimum requirements. Must have successfully completed a Florida Department of Environmental Protection approved training course for Water Treatment Plant Operator C-class licensure within the last five years and provide copies of approved coursework with application. Applicant must successfully pass Florida Department of Environmental Protection Water Treatment Plant C-class licensure examination within 6 months of hire. * Must possess a State of Florida Class "B" commercial driver's license with air brake endorsement. Applicants who do not currently possess a Class "B" CDL with air brake endorsement must acquire a learner's permit within 3 months of hire and obtain the license within 6 months of hire. Applicants who possess an out of state driver's license must obtain a Florida license within 10 days of employment. * Water Treatment Plant Operator C Qualifications: High School Diploma or GED. Must possess a current State of Florida Water Treatment Plant Operator class "C" license. Minimum of one year experience at the full performance level in a Water Treatment Plant Facility. Applicant who possess an out of state driver's license must obtain a Florida license within 1O days of employment. * Water Treatment Plant Operator B Qualifications: High School Diploma or GED. Must possess a current State of Florida Water Treatment Plant Operator class "B" license. Minimum of two years experience at the full performance level in a Water Treatment Plant Facility. Applicant who possess an out of state driver's license must obtain a Florida license within 1O days of employment. * Water Treatment Plant Operator A Qualifications: High School Diploma or GED. Must possess a current State of Florida Water Treatment Plant Operator class "A" license. Minimum of four years experience at the full performance level in a Water Treatment Plant Facility. Applicant who possess an out of state driver's license must obtain a Florida license within 1O days of employment. Knowledge, Skills and Abilities * Knowledge of the operation of mechanical and electrical equipment. * Knowledge of basic mathematics and chemistry. * Ability to read and understand technical manuals. * Ability to understand and follow oral and written instructions. * Ability to establish and maintain effective working relationships with co-workers and supervision. * Ability to readily learn the operation of laboratory equipment. Physical and Mental Requirements: * Able to print, draw, see, and read letters, numbers, words, characters, and symbols which are both large and small. * Able to use hands and fingers to perform titrations and other lab tests. Dexterity is required. * Able to hear, speak and understand conversation in English in normal tones of voice. Use of senses which include sight, smell, hearing and touch as aids in the evaluation and troubleshooting of malfunctioning equipment. * Able to hear normal conversations and communicate clearly, both orally and in writing. * Able to identify and distinguish colors. * Able to smell, identify, and distinguish odors in laboratory water tests. * Able to learn, understand, remember, and complete normal tasks without assistance. * Able to wear personal protective equipment. * Exposure to outdoors, heat, noise, vibration, confined work space, chemicals, mechanical hazards, and electrical hazards. * Able to go from a standing or sitting position to a bending, kneeling, or squatting position, or vice-versa, periodically. * Able to move back and forth and sideways while in a bending, kneeling, or squatting position. * Able to operate a car, pickup truck, and dump truck. * Able to work in adverse environmental and weather conditions (day or night). * Able to load or unload vehicles with objects weighing up to 50 pounds that may be awkward to hold. * Able to lift, carry, push, or pull items which weigh 50 pounds. * Able to walk, stand, sit for periods longer than 30 minutes and walk continuously for more than five minutes at a time. * Able to climb stairs four stories high. * Able to climb ladders 35 feet high and work on scaffolds. * Able to use a variety of hand and gas powered tools and equipment. * Able to work night, weekend and holiday work shifts. * Able to work double shifts (overtime). * Able to work around chemicals used in laboratory water tests and water treatment processes. The City of Melbourne offers a generous benefit package to include: * 100% City paid medical insurance for employee only; coverage available for family * Health Insurance opt-out incentive for employees with other medical coverage * Dental . Vision * Life Insurance in the amount of 1 times your annual salary * Additional life insurance to include coverage for your spouse and child(ren) * Short-term disability * Long-term disability * Flexible Spending and Dependent Care Account * Employee Assistance Program * Wellness Program * 457 Deferred Compensation * Retirement Plans (FRS, local plan for Police and Fire personnel) * Paid Holidays * Tuition Reimbursement For more information about benefits visit ************************************************************************************************************************ 01 The information provided in your application must support your selected answers in the supplemental questions. The information you provide will be verified and documentation may be required. Please be as honest and accurate as possible. You may be asked to demonstrate your knowledge and skills in a work sample or during an interview. By completing this supplemental questionnaire you are attesting that the information you have provided is accurate. Any misstatements, omissions, or falsification of information may eliminate you from consideration or result in dismissal. "See resume" is not an acceptable answer to the questions. * Yes, I understand and agree * No, I do not agree 02 What is the highest level of education you have completed? PROOF OF EDUCATION REQUIRED FOR THE POSITION YOU ARE APPLYING FOR MUST BE UPLOADED TO APPLICATION. * Did not complete High School Diploma or GED * High School Diploma or GED * High School Diploma or GED and Some College * Associate's Degree * Bachelor's Degree * Master's or Higher 03 Do you possess a valid State of Florida driver's license, or a valid out of state driver's license? * Yes * No 04 Do you possess a valid State of Florida or a valid out of state Commercial Driver's License with air brake endorsement? * Yes * No 05 Please indicate your class of driver's license. For example: Class E, CDL B, CDL A, etc 06 Have you completed a Florida Department of Environmental Protection approved training course for Water Treatment Plan Operator C-Class Licensure within the last five (5) years? Copies of approved coursework must be uploaded with application. * Yes * No 07 Do you have working knowledge of nomenclature of water treatment devices? * Yes * No 08 Do you currently possess a Florida Department of Environmental Protection Water Treatment Plant C-class or higher license? * Yes * No Required Question Employer City of Melbourne Address 900 E Strawbridge Ave. Melbourne, Florida, 32901 Phone ************ Website *********************************

Benefits: Competitive salary Dental insurance Employee discounts Health insurance Opportunity for advancement Training & development Vision insurance Orlando, FL The Opportunity: We are seeking a detail-oriented and reliable QA/QC Technician to join our pizza production team. This role is responsible for ensuring that products meet quality and safety standards throughout all stages of production. The ideal candidate has a strong understanding of food safety protocols, attention to detail, and the ability to communicate effectively with production and management teams. Position Responsibilities:· Perform regular inspections of raw materials, in-process products, and finished goods for compliance with company specifications and regulatory standards. · Monitor critical control points (CCPs) and ensure Food Safety Plan/FSMA compliance throughout the facility. · Record, review, and report findings from quality checks and audits. · Assist in the calibration and maintenance of measuring and testing equipment. · Investigate non-conformities and work with production to resolve issues quickly and accurately. · Support continuous improvement efforts by identifying trends, reporting defects, and proposing solutions. · Verify labels, lot codes, packaging, and weights are within acceptable ranges. · Participate in internal audits and assist with documentation during audits. · Ensure all QA/QC logs, records, and forms are completed accurately and on time. Qualifications: · High School Diploma or GED required; Associate's degree in Food Science, Biology, or related field is a plus. · 2-4 years of experience in a food manufacturing or quality control environment preferred. · Working knowledge of food safety standards including HACCP, GMPs, SQF or similar certification. · PCQI certification is a plus. · Food Safety certification is a plus. · Strong attention to detail with excellent organizational skills. · Ability to work in a fast-paced, hands-on production environment. · Comfortable standing, lifting, and moving in a cold or hot production setting. · Basic computer skills (Excel, Word, QA tracking systems). Schedule and Work Environment: Full-time position: schedule includes early morning/evening shifts Monday through Friday based on production needs. Work is performed primarily on the production floor and occasionally in the office. Reports to: Director of Food Services Compensation: $55,000.00 - $80,000.00 per year We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. The Company: Flippers Pizzeria has been serving hand-crafted, artisan pizzas for over 30 years. We have 15 locations, and we are continuing to grow! Our pizza philosophy is simple. We source all natural ingredients with no artificial colors, flavors, or preservatives, and we prepare our pizzas by hand stretching and then baking in 600-degree brick ovens. NO freezers & NO microwaves. We are all fresh, all day. Flippers is pizza perfected . At Flippers Pizzeria, people are and always will be our greatest asset. We have passionate hard-working teams, and we are looking for individuals with a strong work ethic and a positive attitude. Whether you are new to restaurants or are a seasoned veteran, we can teach you the skills necessary to be successful.

Job Details ORL - Orlando, FL None None Hospitality - HotelDescription GENERAL PURPOSE This position is responsible for properly recognize the correct linen belonging to the account being processed. You must ensure there is no mixed, dirty, or damaged linen before feeding into the machine or hand-folding it. You must maintain a fast pace speed meeting company's expectations while practicing safety procedures. In addition, the Production Operators will help on making sure the machinery is working properly, by communicating with their leaders of any issues. DUTIES AND RESPONSIBILITIES Feeding machinery with sheets, Duvets, bathrobes pillowcases, towels, tablecloths napkins, mats Responsible for maintaining a clean and organized working station. Ensure the linen being process belongs to the account assigned. Identify any damaged, dirty, or mixed linen and properly place it in the correct containers. Maintain an average of 85% or above for production based on the IT system in place. (Spindle) Must be logged into the IT system in place. (Spindle) always while working on the machine. Will be required to perform other duties as requested, directed, or assigned. Qualifications QUALIFICATIONS High school diploma or equivalent preferred but not required. 3 months or more related experience in a commercial laundry or hotel industry. Ability to understand, comprehend, and follow simple instructions, short correspondence, and product labeling. Ability to add and subtract two-digit numbers. Able to work in a fast-paced environment. Ability to meet required performance goals and objectives. Ability to work in a team environment and alone. Good communications, both orally and written in English. Must have good attention to detail. APPLICABLE WORKING CONDITIONS WORKING CONDITIONS AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Inside work: protected from weather conditions FREQUENTLY OCCASIONALLY RARELY NEVER Outside work: no effective protection from weather FREQUENTLY OCCASIONALLY RARELY NEVER Both inside and outside work: activities occur both inside and outside an office enclosure FREQUENTLY OCCASIONALLY RARELY NEVER Extreme cold: below 32 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Extreme heat: above 100 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Noise: employees must shout to be heard over ambient noise level (hearing protection required) FREQUENTLY OCCASIONALLY RARELY NEVER Vibration: exposure to oscillating movements of extremities or whole body FREQUENTLY OCCASIONALLY RARELY NEVER Potential hazards: moving parts, electricity, gas, scaffolding, chemicals, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Terminal viewing: extended viewing of screens FREQUENTLY OCCASIONALLY RARELY NEVER Atmospheric conditions (in non-confined spaces): fumes, odors, mists, gases, poor ventilation, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Oils: air and/or skin exposure to oils and other cutting fluids FREQUENTLY OCCASIONALLY RARELY NEVER Respirator: use of a respirator is required FREQUENTLY OCCASIONALLY RARELY NEVER Physical stamina: due to emergency or workload demands, subject to extended work hours requiring stamina beyond normal demands or levels FREQUENTLY OCCASIONALLY RARELY NEVER None: employee is NOT substantially exposed to adverse environmental conditions (work occurs in typical indoors, office or administrative environment) FREQUENTLY OCCASIONALLY RARELY NEVER ESSENTIAL ABILITIES AND FUNCTIONS ACTIVITY FUNCTION AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Essential Non-Essential Rarely Occasionally Frequently Standing (on a hard surface) X X Stairs X Walking X X Sitting X X Twisting X X Stooping X X Crouching X X Crawling X X Talking X X Hearing X X Reaching X X Seeing X X Balancing X X Pushing up to 20 lbs. X X Pushing up to 50 lbs. X X Pulling up to 20 lbs. X X Pulling up to 50 lbs. X X Grasping X X Lifting or carrying up to 10 lbs. X X Lifting or carrying up to 20 lbs. X X Lifting or carrying up to 50 lbs. X X Feeling X X Moving (continuous motion) X X Using precise hand movements X X Reasoning or solving problems X X Reading X X Writing X X Performing mathematical calculations X X Adhering to deadlines under pressure X X Learning or retaining technical information X X Interacting with customers or visitors X X

The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading - PDFs, books, Google Docs, news articles, websites - into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting - Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do Actively ship production code to the web products Work closely with your dedicated product team Participate in product discussions to shape the product roadmap Have the opportunity to work on new and exciting features that will impact millions of lives An Ideal Candidate Should Have Experience. You've built and ship products that have scaled to thousands or millions of users Customer obsession. You are passionate about the field and have the desire to build high quality product that serves customer needs Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs Tech Stack: Vanilla JS, ReactJS, Redux, Firebase, Typescript What We Offer A fast-growing environment where you can help shape the culture An entrepreneurial crew that supports risk, intuition, and hustle A hands-off approach so you can focus and do your best work The opportunity to make an impact in a transformative industry A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Details Experienced Fort Pierce, FL Full Time High School SwingDescription Perricone Farms, a leading citrus juice supplier located in Beaumont, CA, is seeking a Production Technician 2 to join our team. This is a fast-paced position which offers long-term, consistent employment with a competitive benefits package, including but not limited to Health, Vision, Dental, Life and 401K. Pay Rate: $16.50 - $18.50 per hour + $1 Differential Shift / Hours: 2nd Shift; 3:00pm to 11:30pm, possible weekend work (If needed)) Job Duties: As a Production Technician 2, you will be responsible for and rotate through a range of job duties, including but not limited to the following primary tasks: Emptying or Filling 55-gallon Drums Assembling, Packing, and Stacking boxes Wrapping Pallets with Shrink Wrap Operating Machinery Unloading Fruit from Trucks “Grading” or Sorting Fruit Labeling Ensuring Equipment is Functioning Safely Logging Activities Daily Setting up Production Area with Appropriate Materials General Cleaning Drug Free Workplace: Notifies supervisor of unusual problems. Works in accordance with all company policies and procedures. Follows health and safety guidelines. Maintain and keep work area according to cGMP. Food Safety Requirements/Responsibilities: Comply with all Plant, State and Federal OSHA, EPA, FDA, HACCP, and SQF regulations. Conduct all verification activities to assure finished product comply with food safety and quality specifications. Participates in the yearly review of the food safety system. Assist in the maintenance of Food Safety and Quality system. Responsible for Non-GMO SGS Supply Chain Standards. Organizational Relationships: Position reports to Shift Manager Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions, extreme heat and risk of electrical shock. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions and extreme cold. The noise level in the work environment is usually moderate. This is not intended, and should not be construed, to be an all-inclusive list of all responsibilities, skills, efforts, or working conditions as associated with a job. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add or remove duties from particular jobs and to assign other duties as necessary. Qualifications Requirements: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Bi-lingual in English and Spanish helpful.

Job DescriptionSalary: Schedule: 2nd Shift (3:30 PM to 11:30 PM) - Preferred or1st Shift (7:00 AM to 3:30 PM) The Calibration Technician is responsible for the calibration, routine inspection, testing, maintenance and repair of instruments, meters, gauges and other testing and measuring equipment. In addition, this position is responsible for ESD integrity. Essential Duties and Responsibilities Manage onsite calibration program for a variety of electronic equipment to ensure measurement accuracy, precision and quality control across a wide spectrum of instruments. Ensure readings are consistent with other measurements Determine accuracy of readings Establish reliability of the instrument/equipment Calibrate to industry standards Run tests and interpret results to make effective recommendations to fix faulty or broken equipment. May source replacement parts and negotiate costs with suppliers and customers. Maintain ESD integrity within production environment. Support quality and production for data analysis reporting and product support. Prepare routine performance and measurement presentation. Report on various performance (e.g. quality/ on-time/ lean) metrics in support of management communication needs Responsible for conducting testing procedures during manufacturing processes to ensure that products comply with quality standards Understanding and following all applicable ISO guidelines and procedures. Responsible for the cleanliness of work area, equipment and surrounding work space. Participate in Quality Teams as requested. Train and mentor Production Team as required. Other responsibilities as directed and necessary for the business. Qualifications AS Degree in Electronics or other technical discipline, prefer military training (PMEL or TMDE) 3-4 years experience in the manufacturing industry, electronics preferred Experience in calibrating several disciplines of test and measurement equipment Experience working within an ISO 9001 manufacturing environment preferred Knowledge and the ability to apply understanding of metrology to processes and procedures Understanding of basic electro-mechanical tools (multi-meters, calipers, etc.) and basic hand tools (wrench, torque drivers etc.). Solid computer skills with demonstrated strength WORKING with spreadsheets and data analysis techniques, problem solving, mathematical and other workstation skills. Knowledge of ANSI / NCSL Z-540-1 and ISO 9000 Experience using Calibration Lab Software such as LabView, SureCal, Met/Cal, etc. Excellent organizational, written and verbal communication skills are required. Self-motivated, ability to work independently and quickly with a high degree of accuracy. Ability to work and communicate effectively as a team member. Willingness to work flexible hours as necessary. US Person as defined in 22 CRF Part 120.15 (U.S. citizens, lawful permanent residents, refugees and those given asylum in the United States, and temporary residents granted amnesty) since work includes ITAR controlled technical data. Physical Demands How much time is spent on the job in the following physical activities? Please check the appropriate boxes below.

READY TO BUILD A BETTER FUTURE WITH US? Cemex is a leader in the building materials industry, known for our innovation, quality, and sustainability. With over a century of expertise, we are committed to delivering products and services that meet the needs of our customers and communities across the globe. At Cemex, we believe in investing in our people, offering opportunities for growth, competitive benefits, and the chance to be part of a dynamic team. Join us and build your career with a company that's building a better future. Job Summary ABOUT THE JOB We're looking for a responsible and skilled Technician Block Production to join our team. This role is integral to our operations, requiring a strong physical presence and the ability to handle substantial weight with ease. This position involves the continuous handling of concrete blocks, each weighing an average of 50 lbs., demanding both strength and endurance. Job Responsibilities WHAT YOU WILL GET TO DO As a Technician Block Production at Cemex, your daily responsibilities will include: * Safety Compliance: Uphold and advocate for a safe and compliant working environment. * Communication & Instruction: Communicate effectively, following verbal and written instructions to ensure operational efficiency. * Physical Stamina: Maintain stamina and focus while standing for extended periods. * Climbing & Navigation: Navigate and climb conveyors and vertical ladders, demonstrating mechanical aptitude. * Role Adaptability: Learn and adapt to various operational roles including operator, cuber, and forklift duties. * Machinery Operation: Operate heavy machinery such as wheeled loaders and forklifts with proficiency. * Additional Responsibilities: Execute additional responsibilities as directed by management. * Physical Tasks: Perform various physical tasks including bending, squatting, stooping, sweeping, and shoveling. * Tool & Equipment Use: Utilize tools and equipment with dexterity and precision. * Workplace Safety: Adhering to all workplace safety protocols and guidelines. Qualifications WHO WE ARE LOOKING FOR To succeed in this role, you should bring: * Educational and Licensing Requirements: High School Diploma. * Experience: Prior experience with forklift operation is highly desirable. * Skills: A background in electrical work, welding, and fabrication is advantageous. Knowledge, Skills, and Abilities . Working Conditions * Safety First: Wearing protective equipment and adhering to safety protocols is a must. * Dynamic Environment: You'll work in diverse environments, including exposure to varying conditions such as outdoor industrial operations settings. * Physical Requirements: Expect frequent walking, sitting, lifting (up to 50 pounds), pushing, pulling, and climbing as part of your daily routine. Physical Requirements WHY CEMEX? At Cemex, we're committed to helping you reach your full potential. Whether you're just starting out or looking to take the next step in your career, we provide the resources and support you need to succeed. Let's build a better future together. APPLY NOW Legal Notices Cemex is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate based on race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state, or local law in the programs or activities which it operates. Cemex will consider for employment qualified applicants with criminal histories in a manner consistent with all local, state, and federal laws. Cemex is an E-Verify participating employer. Arizona Smoke-Free Act. Cemex complies with the State of Arizona's Smoke-Free Act (Arizona Revised Statutes § 36-601.01). Smoking and/or the use of tobacco or related products is prohibited in and on Cemex property as well as any building and/or vehicle owned or leased by Cemex. EEO Statement - En Español Cemex es una institución EEO/AA (igualdad de oportunidad/acción afirmativa) y no discrimina en base al sexo, edad, raza, color, religión, discapacidad física o mental, credo, origen nacional, estatus veterano, orientación sexual, infomación genética, identidad de género, o expresió n de género en los programas o actividades los cuales opera. Nearest Major Market: Port Saint Lucie

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Teledyne Marine is a group of leading-edge undersea technology companies that have been assembled by Teledyne Technologies Incorporated. Through acquisitions and collaboration, over the past 10 years Teledyne Marine has evolved into an industry powerhouse, bringing the best of the best together under a single umbrella. With technologies divided into 5 core segments; Imaging, Instruments, Interconnect, Seismic and Vehicles, Teledyne Marine sales staff can address not only brand level solutions, but turn-key, customized systems that leverage our full range of technology. Our goal is to provide one-stop purchasing capability, world-wide customer support, and the technical expertise to solve our customer's toughest challenges. A Sea of Solutions.....One Supplier. For more information, visit our website at *********************** This position is responsible for assembling electrical and fiber optic jumper and cable assemblies utilizing various mechanical and hand tools. Essential Duties and Responsibilities: Measure, cut, prepare rubber hose, cable, wire for termination Pull wire through hose ID and any attached hardware prior to soldering Terminate hose and cable assemblies with machined hardware per procedure Stretch jumper assemblies utilizing a forklift and load meter Accurately report labor hours for each order Ability to troubleshoot issues with little to no engineering support Maintaining security for all quality verification equipment and its calibration control Notify errors on procedures, drawings, bills of material, and router to the support teams (Quality, Manufacturing Engineering). Responsible for completing documentation accurately and timely Responsible for entering data into the IFS system accurately and timely Responsible for maintaining high quality standards and workmanship Maintain excellent communication and working relationship with all departments within the company Communicating special tooling needed to perform operation that may have not been identified Adhere to all safety procedures and maintain a safe working environment Education and Experience: HS Diploma or GED Two year technical degree preferred Recent experience in a mechanical, electrical or production trade Recent experience in a manufacturing environment Job Knowledge, Skills and Abilities: Ability to work safely with minimal or no direct supervision Ability to accurately read a tape measure Ability to work outside for several hours during various weather conditions Ability to stand for several hours Ability to use hands in a continuous motion for several minutes at a time Ability to work with changing demands in a fast paced environment Ability to work from verbal directions Common sense approach to troubleshooting Ability to learn rapidly in an engineer to order production facility Excellent communication skills with both internal and external customers Ability to use mechanical and pneumatic tools required to assemble Teledyne specific product Able to read technical drawings and electrical schematics, specifications and procedures Computer Literate Working knowledge of MS Office programs, i.e., Word, Excel, Outlook Ability to take constructive feedback from peers, leads and / or managers Good shop math skills Due to the type of work at the facility and certain access restrictions, successful applicants must be a "US Person" (US Citizens, US Nationals, lawful permanent residents, asylees or refugees). What can Teledyne offer YOU? A Competitive Salary & Benefits Package Excellent Health, Dental, Vision Paid Vacation Time Paid Sick Time Life Insurance Benefits Paid Holidays 401(k) Eligibility Employee Stock Purchase Plan Fitness Challenges Educational Tuition Reimbursement Employee Fun Events throughout the year Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Testing, documentation, troubleshooting, and inspection of Electro/Mechanical assemblies. Assemble Chassis Components, Electro-optic, and Electronic Assemblies from various forms of documentation and quality or engineering specifications, utilizing proper tools, equipment, and processes. Essential Duties and Responsibilities Assembling products or sub-assemblies in a clean room manufacturing environment, according to verbal or written instructions or by following drawings, procedures, wiring lists or set operating procedures. Operate hand tools, power tools, and/or production equipment to include manual and automated testing equipment such as: o Oscilloscopes o Pulse generators o Meters o Power supplies o Network analyzers Read and interpret blueprints and schematics. Working and performing a wide variety of electronic, mechanical, and/or electro-mechanical assembly operations on assemblies or sub-assemblies, in small scale. Assemble Printed Circuit Boards, connectors and other components into housings and make required interconnections using soldering both THT and SMT devices, wire crimping, and other techniques as specified to IPC Class 3 standards. Fabricate Cable assemblies using soldering, wire crimping, and other techniques as to IPC /WHMA-A-620, Class 3 standards. Accurately record information, traceability requirements, labor hours, and other statistics, into computer databases to comply with customer and AS9100 requirements. Assist other technicians/teammates, as , with assembly processes and tasks. Support other activities as assigned by Production Manager. The ideal candidate will have the ability to work as an active team member, constantly looking to improve processes to increase efficiency and dependability in the Mil Spec products produced. Education and/or Experience AS degree (preferred) or other formal education in electronics. Minimum of 3 years Electrical/Mechanical assembly experience, to include wiring. Certification in high reliability electronic assembly processes, per J-STD-001, IPC-A-610 & IPC/WHMA-A-620. Basic Employment Requirements Excellent communication skills, self-motivated, capable of multitasking and have high attention to detail. Ability to interpret various forms of assembly documentation. Ability to handle materials safely and lift up to 50 lbs. Must be authorized to work in the US and be eligible to obtain a passport. Must pass Security background screening process. Must be able to work over-time as needed. Work Environment/Corporate Culture The work environment is one of a professional office. 9/80 Work schedule or as assigned by Production Manager.. Full benefits package including medical, dental, STD, LTD, GTL, 401K, Holidays, Vacation, paid time off to eligible employees. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

A U.S.-based manufacturer specializing in OTC drug products, personal care, skincare, haircare, pet care, and cosmetics is seeking qualified candidates for a Manufacturing Technician position. This position will operate, maintain, and troubleshoot equipment used in the production of goods, ensuring quality and efficiency throughout the manufacturing process. This position is located in Titusville. **What's the Job?** + Follow all cGMP's (current Good Manufacturing Practices) and SOP's (Standard Operating Procedures) and Safety Procedures + Understand and follow manufacturing and filling procedures. + Set up and operate equipment used in mixing or filling. Clean/sanitize equipment, as needed. + Dispense raw materials for batches based on specific quantities on the procedure. + Use steam and cooling water systems to heat and cool batches. + Observes batch production and reports as needed. Complete required documentation properly. + Maintain accurate inventory. + Cleaning and Housekeeping to include dispose/recycle empty containers and general housekeeping and cleanliness of surrounding work area + Perform other duties as needed or assigned **What's Needed?** + High school diploma or equivalent + Experience in a manufacturing environment involving cGMP practices. Mixing experience, a plus. + Experience in manufacturing OTC drug products, personal/skincare or haircare/cosmetic items, pet care is highly desired. + Must read, write and speak in English and communicate clearly and effectively + Able to participate in team environment + Good math skills, basic computer skills for email and data entry + Ability to routinely lift up to 80 pounds + Mechanical skill a plus + Must be able to become Forklift certified **What's in it for me?** + Opportunity to be part of a great customer experience. + Potential for permanent employment + Great atmosphere and opportunity to work on a dynamic team. If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! **About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells** _ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands -_ **_Manpower, Experis, Talent Solutions, and Jefferson Wells_** _-_ creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

Fabrication Technician Job DescriptionJob Title: Fabrication Technician The Fabrication Technician is responsible for the construction, assembly, and maintenance of mechanical components and systems. This role involves operating machinery, and ensuring quality standards are met throughout the fabrication process. Responsibilities: - Operate fabrication machinery such as welders, cutters, thread machines. - Assemble components according to specifications. - Inspect finished products for quality and accuracy. - Maintain equipment and ensure a clean and safe work environment. - Collaborate with other technicians to improve fabrication processes. Qualifications: - High school diploma or equivalent; - Proven experience in fabrication or a related field. - Knowledge of safety standards and procedures. Skills: - Strong attention to detail. - Manual dexterity and physical stamina. - Problem-solving and critical thinking skills. - Effective communication and teamwork abilities. Physical Requirements: - Prolonged periods sitting at a desk and working on a computer. - Must be able to lift 15 pounds at a time. Work Environment: Fabrication Technicians typically work in manufacturing or industrial settings. The role may involve exposure to loud noises, heavy machinery, and varying temperatures. Safety equipment and protective measures are essential.