Manufacturing technician jobs in New London, CT - 274 jobs

*5% Shift Differential* PURPOSE: Under general supervision, perform all required production operations to assemble basic to semi-complex assembled molds for shelling operations. ESSENTIAL JOB FUNCTIONS: Visually check individual pattern parts for surface defects; makes required repairs. Work from samples and any required special instructions to assemble patterns and runner systems, position and secure supports, metal chills, and other components and parts according to individual job requirements. Blend and smooth joints and connections, perform other associated duties to insure proper setup and gating of pattern for molding. Exercise care in the handling of patterns and completed units to avoid distortion of breakage, and to assure proper positioning of a wide variety of parts, components, supports, chills, vents, gates, and other features. Upon completion, prepare necessary forms pertinent to operation, and dispose of patterns as directed. Constructs complete runner systems for wax and plastic patterns; places and secures sprues, gates, cores, vents, risers, and other supports to obtain desired set-up. Cuts and forms wax supports using hands and hand tools. Constructs set-ups and notifies supervisor if completed dimension does not conform to engineering specifications. Uses creative ability and experience in preparing and determining gating set-up to control cost of operations. Work involves a variety of hand operations requiring a high degree of manual dexterity and close visual attention to properly position and blend a large number of parts, and to maintain complex inter-relationships and close dimensional tolerances in order to assure acceptable parts. Detect and report defective materials, equipment and unusual conditions to proper supervision. Follow prescribed safety regulations. Perform a variety of other tasks of equal or less complexity as assigned by supervisor, or as required by position. SPECIAL SKILLS AND PHYSICAL REQUIREMENTS: Maintain production standards with acceptable quality. Must be willing and able to cross train and work in other departments/areas. Demonstrates the ability to read, understand and complete all department and/or production documents. Must be able to set up and assemble all routine production molds and some experimental molds. Ability to inspect patterns for defects such as air bubbles, repair and remove flash, and radius fillets and edges. Ability to satisfy Repairer “C” job qualifications Requires the use of judgment to construct set-ups and runner systems, positions and secure parts, check work, make repairs, and perform duties effectively. Establishes written/photographic gating procedures for new jobs. Occasionally lifts and moves material weighting 15-35 lbs. Manual dexterity essential. Continuous mental or visual attention in positioning and securing parts, maintaining relationships, checking work, and making required repairs. Demonstrated proficiency to safely operate - Hot plates, Hot knives, Torches, Dip Tank REPORTING RELATIONSHIPS: Reports to the Wax lead person and the Wax supervisor. EDUCATION AND EXPERIENCE: Over one year experience. Use of basic mathematics, ability to read, write and speak English. Ability to perform routine arithmetic computation. Keep records, files, and makes reports. Works from verbal/written instructions, sketches, specifications, and drawings. Interprets scales, calipers, and gauges, etc., involving interpretation.

Manufacturing Technician - 3rd Shift We're excited to offer a MANUFACTURING TECHNICIAN opportunity at our North Kingstown, RI facility, where we manufacture high-purity chemicals and solvents as part of the semiconductor industry supply chain. In this role, you'll support our 3rd shift operations, ensuring products are processed and packaged safety and efficiently to meet production goals. You'll gain hands-on experience with state-of-the-art equipment and contribute to the overall manufacturing process. Whether you're starting your career or looking to grow in manufacturing, this position offers the chance to learn and make a real impact in a dynamic, fast-paced environment that supports cutting-edge technology. Company Overview FUJIFILM Electronic Materials, U.S.A. fuels innovation in the semiconductor industry-where chemistry meets technology. Our advanced materials and formulations enable manufacturers to build the microchips that power Artificial Intelligence, computers, electric vehicles, smartphones, and more. We're a global business-to-business supplier of chemical formulations and advanced materials used for manufacturing and packaging semiconductors. Our chemical formulations allow top manufacturers to produce microchips that both power and connect our digital world. Think you've got what it takes to build a more connected world? Then connect with us today and challenge the boundaries of what's possible-for the world and your future. We have six U.S. manufacturing and Research & Development facilities, located in: Mesa, Arizona; Castroville, California; Hollister, California; Carrollton, Texas; and North Kingstown, Rhode Island-each offering unique local experiences, from vibrant cultural scenes to historic charm. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description WHAT YOU'LL BE DOING * Operate, monitor, and adjust chemical manufacturing equipment to ensure safe and efficient production. * Handle and measure raw materials according to specified formulations, follow strict safety and quality guidelines. * Collect samples for QC lab analysis. * Perform basic equipment troubleshooting and maintenance. * Accurately process production data transactions in ERP system (SAP). * Follow standard operating procedures (SOPs) and adhere to safety protocols, including the proper use of personal protective equipment (PPE) and hazardous material handling procedures. * Perform equipment cleaning. * Participate in continuous improvement initiatives, safety programs, and required training to enhance operational knowledge and compliance. * Adhere to 5S practices to maintain a clean and safe work environment. QUALIFICATIONS * High school diploma or equivalent; technical certification or associate degree in a related field is preferred. * Entry-level position - no prior experience required. However, candidates with experience in a manufacturing or chemical processing environment are preferred and may be considered for higher-level roles. * Basic math skills, including the ability to perform measurements, conversions, and simple calculations related to production processes. * Ability to read, understand, and follow written instructions, SOPs, and safety guidelines in English. * Communication skills to document production activities, report issues, and collaborate effectively with team members. * Basic computer skills for data entry and reporting. Experience with SAP strongly preferred. * Fork truck driving experience preferred. * Strong attention to detail and commitment to safety and quality. * Must be able to wear required personal protective equipment (PPE), including a full or half-face respirator, as necessary. PHYSICAL DEMANDS * Ability to stand, walk, and move continuously for extended periods. * Frequent lifting, carrying, pushing, or pulling of materials and equipment, typically 5-20 lbs. * Use of hand trucks, drum dollies, or other material-handling equipment to move heavy drums of material or equipment. * Manual dexterity to operate equipment, handle materials, and perform precise tasks. * Bending, stooping, kneeling, and reaching as required for equipment operation and maintenance. * Ability to climb stairs and ladders as needed in a manufacturing setting. * Good hand-eye coordination and visual acuity to monitor equipment, read documentation, and ensure safety compliance. * Ability to wear and work in personal protective equipment (PPE) including gloves, safety glasses, respirators, and chemical-resistant uniform, as required. WORK ENVIRONMENT * Manufacturing environment with exposure to: * Chemicals, fumes, and airborne particles (with proper PPE provided). * Noise levels requiring hearing protection in designated areas. * Work may involve operating near moving machinery and heavy equipment. * Shift work, including nights, weekends, and overtime, may be required based on production needs. Candidates are selected based on their qualifications, experience, and skill proficiency. Depending on their skillset and level of expertise, successful applicants may be hired at a I, II, or Sr. level Manufacturing Technician. The responsibilities and expectations will align with the corresponding level of the position. WHY JOIN US? We value our employees and offer a comprehensive benefits package to support your health, career growth, and work-life balance, including: * Competitive Pay, typically with opportunities for overtime. * Health & Wellness Benefits (Medical w/HSA and Prescription, Dental, Vision, and loads of other Wellness Benefits) * Retirement Plans with company match AND additional contribution to help you plan for the future. * Paid Time Off (Vacation, Personal Time Off, Sick, and Holidays) * Career Development with room for advancement * Shift Premiums for 2nd and 3rd shifts * Employee Recognition Programs and a collaborative work environment * Life and Disability Insurance for added peace of mind * Employee Assistance Program (EAP) for confidential support with personal, family, or work-related challenges. * Employee Discounts & Referral Bonuses * On-site Gym to help you stay fit and energized. WHY NORTH KINGSTOWN, RI? Located in the heart of the beautiful Quonset Point Business Park, our facility is surrounded by the best that RI has to offer. With nearby golf courses (walking distance), local beaches (walking distance), and a vibrant community in North Kingstown, it's the perfect location to enjoy both work and leisure. Want more? North Kingstown is located just a short drive from the state's capital, Providence, and offers easy access to urban amenities, including theaters, museums, restaurants, and entertainment options. Join us at FUJIFILM Electronics Materials, U.S.A., Inc. and experience the perfect work-life balance in a picturesque, well-connected part of Rhode Island. TO ALL AGENCIES: Please, no phone calls or emails to any employee of Fujifilm about this requisition. All resumes submitted by search firms/employment agencies to any employee at Fujifilm via-email, the internet or in any form and/or method will be deemed the sole property of Fujifilm, unless such search firms/employment agencies were engaged by Fujifilm for this requisition and a valid agreement with Fujifilm is in place. In the event a candidate who was submitted outside of the Fujifilm agency engagement process is hired, no fee or payment of any kind will be paid. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (********************************).

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Responsibilities Deliver on production goals, while focused on safety and quality Produce product per recipes and SOP's, maintaining high quality standards Package product into proper containers with proper labeling to ensure compliance with state regulations Ensure all standards for processing procedures and laboratory protocols are followed Compliance with local and state regulations Adherence to quality control methods throughout entire process Documentation of manufacturing methods are created and maintained Electronically convert packaged products in the state traceability system Manage time efficiently to meet goals while consistently producing quality product Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift Exhibit competency in basic organizational skills, communication skills and Windows based operating software Use independent judgment regarding product processing, keeping quality and goals in mind Help create a positive environment by having a positive attitude and by being self-motivated Other duties as assigned Qualifications High School Education or GED graduate; some college or college graduate preferred 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred Equivalent combinations of education and experience may be considered Must be able to work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure, and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI Ability to listen well and communicate effectively with various audiences Ability to perform monotonous tasks with great efficiency without losing qualities Must be able to follow basic instructions and accept constructive criticism Prior cannabis experience not required Additional Requirements Must have a valid driver's license or State ID card Must be a minimum of 21 years of age Must pass all required background checks Must be and remain compliant with all legal and company regulations for working in the industry Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil).

Job Description Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! What will you be doing? Standard Fabrication - Utilize machinery to customize fabric belts (measuring, cutting, pressing) to customer specifications. Special Fabrication - Utilize machinery to customize fabric belts (perforations, v-guides, flex cutting) to customer specifications. Automated Fabrication - Utilize multiple automated machines to customize fabric belts to customer specifications. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values is how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher-level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate of $15.85/hour If you are interested in becoming a part of a World-Class Team, submit your application today! RESPONSIBILITIES OF THIS POSITION - CORE: To support the vision, mission and guiding principles of the company. While performing any procedure, all associates and contract personnel must observe applicable Safety, Health, and Environmental rules and guidelines. The use of appropriate personal protective equipment is required. Attend and participate in training opportunities and seminars relevant to this position. Adhere to appropriate company operating procedures, benefit rules, employment policies and safety policies. RESPONSIBILITIES OF THIS POSITION - PRODUCTION: Follows work instructions and is responsible for good quality Grinds tubes and belts. Measures work piece dimensions to assess conformance. Changes sandpaper when required. Initials work order upon completion of job duty and inspection of work performed as acknowledgment of properly completing task. Checks thickness gauges for accuracy. Performs minor machine maintenance such as oiling machines, dies, or work pieces. Notifies Supervisor of any equipment malfunctions or quality problems. Inspects ground tubes to meet work instruction requirements. Performs a combination of production tasks, which may include loading machinery, positioning work, setting up jobs, adjusting and operating machinery. May load and unload materials, parts or products; stock to designated work areas; pack products and may clean surface of machines and work areas. Operates machinery and equipment. Inspects ground tubes to meet work instruction requirements. Reads job specifications to determine machine adjustments and material requirements. Able to access databases as necessary to retrieve work instructions in order to perform work. Maintain own productivity while performing the duties mentioned above. Prepares material to be move to next station. Checks set-ups at beginning of shift to ensure grinder is in proper operating condition. Notifies Supervisor when supplies need replenishing. Follows all safety rule and procedures. Maintain good housekeeping in department. Performs other duties as required. First Shift - 7:00AM - 3:00PM Second Shift - 3:00PM - 11:00PM - Base Pay + $1.00 Shift Differential

Manufacturing Technician - 3rd Shift We're excited to offer a MANUFACTURING TECHNICIAN opportunity at our North Kingstown, RI facility, where we manufacture high-purity chemicals and solvents as part of the semiconductor industry supply chain. In this role, you'll support our 3rd shift operations, ensuring products are processed and packaged safety and efficiently to meet production goals. You'll gain hands-on experience with state-of-the-art equipment and contribute to the overall manufacturing process. Whether you're starting your career or looking to grow in manufacturing, this position offers the chance to learn and make a real impact in a dynamic, fast-paced environment that supports cutting-edge technology. Company Overview FUJIFILM Electronic Materials, U.S.A. fuels innovation in the semiconductor industry-where chemistry meets technology. Our advanced materials and formulations enable manufacturers to build the microchips that power Artificial Intelligence, computers, electric vehicles, smartphones, and more. We're a global business-to-business supplier of chemical formulations and advanced materials used for manufacturing and packaging semiconductors. Our chemical formulations allow top manufacturers to produce microchips that both power and connect our digital world. Think you've got what it takes to build a more connected world? Then connect with us today and challenge the boundaries of what's possible-for the world and your future. We have six U.S. manufacturing and Research & Development facilities, located in: Mesa, Arizona; Castroville, California; Hollister, California; Carrollton, Texas; and North Kingstown, Rhode Island-each offering unique local experiences, from vibrant cultural scenes to historic charm. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description WHAT YOU'LL BE DOING Operate, monitor, and adjust chemical manufacturing equipment to ensure safe and efficient production. Handle and measure raw materials according to specified formulations, follow strict safety and quality guidelines. Collect samples for QC lab analysis. Perform basic equipment troubleshooting and maintenance. Accurately process production data transactions in ERP system (SAP). Follow standard operating procedures (SOPs) and adhere to safety protocols, including the proper use of personal protective equipment (PPE) and hazardous material handling procedures. Perform equipment cleaning. Participate in continuous improvement initiatives, safety programs, and required training to enhance operational knowledge and compliance. Adhere to 5S practices to maintain a clean and safe work environment. QUALIFICATIONS High school diploma or equivalent; technical certification or associate degree in a related field is preferred. Entry-level position - no prior experience required. However, candidates with experience in a manufacturing or chemical processing environment are preferred and may be considered for higher-level roles. Basic math skills, including the ability to perform measurements, conversions, and simple calculations related to production processes. Ability to read, understand, and follow written instructions, SOPs, and safety guidelines in English. Communication skills to document production activities, report issues, and collaborate effectively with team members. Basic computer skills for data entry and reporting. Experience with SAP strongly preferred. Fork truck driving experience preferred. Strong attention to detail and commitment to safety and quality. Must be able to wear required personal protective equipment (PPE), including a full or half-face respirator, as necessary. PHYSICAL DEMANDS Ability to stand, walk, and move continuously for extended periods. Frequent lifting, carrying, pushing, or pulling of materials and equipment, typically 5-20 lbs. Use of hand trucks, drum dollies, or other material-handling equipment to move heavy drums of material or equipment. Manual dexterity to operate equipment, handle materials, and perform precise tasks. Bending, stooping, kneeling, and reaching as required for equipment operation and maintenance. Ability to climb stairs and ladders as needed in a manufacturing setting. Good hand-eye coordination and visual acuity to monitor equipment, read documentation, and ensure safety compliance. Ability to wear and work in personal protective equipment (PPE) including gloves, safety glasses, respirators, and chemical-resistant uniform, as required. WORK ENVIRONMENT Manufacturing environment with exposure to: Chemicals, fumes, and airborne particles (with proper PPE provided). Noise levels requiring hearing protection in designated areas. Work may involve operating near moving machinery and heavy equipment. Shift work, including nights, weekends, and overtime, may be required based on production needs. Candidates are selected based on their qualifications, experience, and skill proficiency. Depending on their skillset and level of expertise, successful applicants may be hired at a I, II, or Sr. level Manufacturing Technician. The responsibilities and expectations will align with the corresponding level of the position. WHY JOIN US? We value our employees and offer a comprehensive benefits package to support your health, career growth, and work-life balance, including: Competitive Pay, typically with opportunities for overtime. Health & Wellness Benefits (Medical w/HSA and Prescription, Dental, Vision, and loads of other Wellness Benefits) Retirement Plans with company match AND additional contribution to help you plan for the future. Paid Time Off (Vacation, Personal Time Off, Sick, and Holidays) Career Development with room for advancement Shift Premiums for 2nd and 3rd shifts Employee Recognition Programs and a collaborative work environment Life and Disability Insurance for added peace of mind Employee Assistance Program (EAP) for confidential support with personal, family, or work-related challenges. Employee Discounts & Referral Bonuses On-site Gym to help you stay fit and energized. WHY NORTH KINGSTOWN, RI? Located in the heart of the beautiful Quonset Point Business Park, our facility is surrounded by the best that RI has to offer. With nearby golf courses (walking distance), local beaches (walking distance), and a vibrant community in North Kingstown, it's the perfect location to enjoy both work and leisure. Want more? North Kingstown is located just a short drive from the state's capital, Providence, and offers easy access to urban amenities, including theaters, museums, restaurants, and entertainment options. Join us at FUJIFILM Electronics Materials, U.S.A., Inc. and experience the perfect work-life balance in a picturesque, well-connected part of Rhode Island. TO ALL AGENCIES: Please, no phone calls or emails to any employee of Fujifilm about this requisition. All resumes submitted by search firms/employment agencies to any employee at Fujifilm via-email, the internet or in any form and/or method will be deemed the sole property of Fujifilm, unless such search firms/employment agencies were engaged by Fujifilm for this requisition and a valid agreement with Fujifilm is in place. In the event a candidate who was submitted outside of the Fujifilm agency engagement process is hired, no fee or payment of any kind will be paid. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (********************************).

EXPERIENCE ONLY 7:00 AM to 5:00 PM Monday - Thursday and/or 7:00 AM to 3:00 PM Monday - Friday The Diecast Technician Level 1 (herein as “Diecast Tech 1”) is responsible to maintain the operation of the Diecast department on the corresponding production shift; this Job Description is applicable for 1 st , 2 nd , or 3 rd shift Diecast Tech 1. The Diecast Tech 1 works with Diecast Tenders and more senior Diecast Technicians to keep diecast machines running at target cycle rates, producing quality cast parts from metal ingots. The Diecast Tech 1 must be able to complete all the responsibilities of the Diecast Tender; continually monitors machine operations, filling pots with metal ingots, clearing cast parts from collection totes, performing in-process inspections, and supplying the department and machines with the materials and resources required for safe, consistent operations. The Diecast Tech 1 ensures machines follow approved process sheet and cast parts meet specifications per part-specific QAP's to ensure repeatable, acceptable quality diecast parts.

LiquidPiston is transforming aerospace propulsion with its breakthrough rotary engine technology. As we expand into fixed-wing UAV and aircraft applications, we're building a world-class manufacturing team to deliver advanced aerospace components with precision and performance in mind. Join us in pioneering the future of flight. Position Overview We are seeking a Composite Manufacturing Specialist/Technician to lead the hands-on fabrication of carbon fiber, Kevlar, and epoxy components for fixed-wing UAVs and aircraft. The ideal candidate will be highly skilled in composite layup and mold-making, with an eye for craftsmanship and a passion for high-performance materials. This role involves working closely with engineers to develop a dedicated composite manufacturing space, processes, and prototypes-turning ideas into flight-ready parts. Key Responsibilities Fabricate high-quality composite components (e.g., wings, fairings, and other structural elements) using carbon fiber, Kevlar, and epoxy systems Design and build molds for composite layups, including plug construction, tool prep, and vacuum bagging Comfortable with hand lay-up, vacuum bagging, Resin Transfer Molding (RTM), autoclave modeling, and compression molding techniques. Collaborate with engineering staff to develop manufacturing workflows, workspaces, and specialized tools Perform field repairs, composite part modifications, and rapid design iterations Ensure a clean, safe, and organized shop environment with a focus on consistent, top-tier fabrication quality Maintain documentation for fabrication processes, material usage, and design changes Qualifications Proven hands-on experience in composite fabrication-ideally from aerospace, marine, motor sports, or performance product sectors Strong portfolio showcasing past projects and physical components (photos required) Skilled in mold-making, layup, vacuum bagging, and finishing techniques High attention to detail with a commitment to producing both mechanically sound aesthetically pleasing parts Self-driven, reliable, and focused on quality and committed to deadlines Excellent organization, cleanliness, and shop discipline are essential Preferred Skills Experience with FEA (Finite Element Analysis) and structural optimization of composite components Comfort with CNC machining, hand tools, and general shop equipment Familiarity with small aircraft or UAV structures and aerodynamic design principles Benefits & Perks Flexible PTO: We value work-life balance and encourage time to rest and recharge. Health & Wellness: Comprehensive medical, dental, and vision coverage-you choose what works best for you. Equity Participation: Permanent employees receive RSUs (Restricted Stock Units). 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening. Powered by JazzHR S9dbN9RT8J

Employment Type: Contract Business Unit: ARI Manufacturing Support Duration: 7+ months (with likely extensions and/or conversion to permanent) Notes: Working on site with the opportunity to work remotely in some instances. 3 Key Consulting is hiring a Specialist Manufacturing for a consulting engagement with our direct client, a leading global biopharmaceutical company. Job Description: Operations is one of three foundational functions at our client with a mission to manufacture and deliver safe and effective medicine to patients around the world. The Operations Program at the Rhode Island site is divided into five functions: Supply Chain, Process Development, Quality, Manufacturing, and Facilities & Engineering. We are currently seeking highly motivated, hardworking individuals who will directly support Manufacturing operations in their newest Next Generation Biomanufacturing plant. Along with key business partners and functional groups, this position will focus on directly supporting manufacturing operations and new product introductions. The primary responsibilities for this role may include, but are not limited to the following: Support of manufacturing operations. Management of Manufacturing process documentation per required process in accordance with agreed timelines and in adherence with format, content and style guidelines, giving consideration to usability and ensuring accuracy, consistency and quality. Initiating and owning quality records (e.g. change controls, deviations, CAPAs). Why is the Position Open? Additional workload on team. Top Must Have Skills: GMP experience. Technical writing experience. Development of regulated or process documents with the ability to deliver high quality documentation. Day to Day Responsibilities: Support of manufacturing operations. Management of Manufacturing process documentation per required process in accordance with agreed timelines and in adherence with format, content and style guidelines, giving consideration to usability and ensuring accuracy, consistency and quality. Initiating and owning quality records. Basic Qualifications: Bachelor's degree in Engineering, Science or related field. Preferred Qualifications: 3 or more years of experience in Cell Culture or Purification execution and/or support. Single use technology experience. Proficient on Microsoft Office Suite. Ability to work independently and as a team player. Excellent collaboration and problem solving skills. Ability to work virtually. Ability to understand, apply and evaluate basic chemistry, biology and physical principles. Experience with Manufacturing execution and automation systems. Experience with lab equipment/testing. Experience in influencing and negotiation. Employee Value Proposition: Great Biotech/pharma to work for. Grow their skillset. Red Flags: Inexperience in GMP and technical writing Interview process: Video Skype Panel Interview We invite qualified candidates to send your resume to **************************. If you decide that you're not interested in pursuing this particular position, please feel free to take a look at the other positions on our website ******************************* You are also welcome to share this opportunity with anyone you think might be interested in applying for this role. Regards, 3KC Talent Acquisition Team

Job DescriptionSalary: $17 Westaff is looking for a Light Duty Manufacturing associate in Portland, CT! This is a temporary role** Hours:2nd shift, Monday-Friday, 3:30pm-11:30pmWILL TRAIN FOR 1 WEEK ON FIRST SHIFT Pay:$17-18/hr depending on experience The responsibilities of the Manufacturing Associate are: Trimming plastic parts and packing them into boxes. Loading/unloading material, finished products & supplies Sorting, labeling and organizing incoming shipments/inventory Counting materials for inventory APPLY TODAY for immediate consideration for the Temporary Manufacturing Associate position!! Light Duty Manufacturing Associates are eligible for free online classes, weekly pay, and benefits through Westaff. Military and Veterans are encouraged to apply!

Job DescriptionSalary: $38-$45 Senior Production Technician CT About Relevate Power Relevate Power is on a mission to become the most trusted 24/7 renewable energy provider in rural and suburban America. We develop, acquire, and operate hydropower, solar, and energy storage projectsdelivering clean, reliable energy to local organizations while prioritizing environmental health. Our culture is built around a commitment to excellence, people development, and responsible asset management. We live by our values: growing people through our company, keeping our word, maintaining safe spaces, making data-driven decisions, embracing innovation, and achieving meaningful results. Join us in shaping the future of renewable energy and uplifting the communities we serve. Position Overview As a Senior Production Technician on the Plant Operations team, you will be a hands-on leader responsible for the safe and efficient operation, maintenance, and repair of hydropower plant equipment and systems. In addition to technical expertise, youll play a key mentoring roleguiding junior technicians and setting high standards in safety, reliability, and performance. Your leadership and technical acumen will be instrumental in advancing our clean energy mission and ensuring the operational excellence of our facilities. Key Responsibilities Lead the safe operation, monitoring, and maintenance of hydropower generation stations. Perform and oversee complex maintenance, troubleshooting, and repair tasks on turbines and associated systems. Supervise gate changes and ensure accurate, timely documentation. Monitor and report critical conditions and instrument readings during periods of significant runoff to support real-time decision-making. Plan and execute station and dam operations with strict adherence to safety protocols. Diagnose and resolve hydraulic, electrical, and mechanical issues; provide technical recommendations. Lead the implementation of a comprehensive equipment quality assessment and issue reporting program. Act as a contractor liaison as needed, reporting to supervisors or project managers. Ensure team compliance with Health, Safety, Security, and Environmental (HSSE) protocols. Operate in compliance with FERC regulations and support site readiness. Provide guidance, training, and mentorship to junior Production Technicians. Set and model high standards in adaptability, professionalism, and response to emergencies or shifting priorities. Support operational continuity by being available for on-call duties, overtime, and emergency call-ins. Maintain flexibility to work at multiple stations, promoting collaboration and operational efficiency. Embody and promote Relevates values, supporting team cohesion and continuous improvement. Qualifications 5+ years of experience in hydropower operations with strong mechanical and electrical troubleshooting skills. Background in technical training, the military, or a relevant industry strongly preferred. Proficiency in reading and interpreting complex schematics (electrical, hydraulic, mechanical). Hands-on experience in rigging, lifting, welding, and electrical repair is a plus. Demonstrated leadership, mentoring, and problem-solving abilities. Strong communication skills and ability to thrive in both independent and collaborative environments. Valid drivers license and willingness to travel regionally, including occasional overnight stays. Proficiency with Microsoft Office Suite, including Outlook. Experience with hydro turbine/generator systems, industrial electrical systems, and PLCs is strongly preferred. Familiarity with PLC programming and troubleshooting is a significant advantage. Benefits Competitive salary commensurate with experience Comprehensive benefits package including: Health insurance Paid time off (PTO) 401(k) plan Bonus and/or equity opportunities Professional development support and career advancement opportunities Join Relevate Power and help lead the way in transforming Americas renewable energy landscapeone community at a time. Must be authorized to work in the US for any employer.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: * The Process Technician is responsible to organize, motivate the 2nd shift team and communicate issues to the supervisor; assuming the responsibility of emergency coordinator/IC in the absence of the 2nd shift supervisor. Responsible for quality, workflow, efficiency and communicating company expectations, as well as the inspection of products to ensure quality. The Process Technician will be cross trained in all areas and must be operational on all equipment for the inner layer facility. Duties and Responsibilities: * Monitors and produces product quality by initiating actions to prevent the occurrence of product nonconformity, identifying and records any quality problems, initiating, recommending, and providing solutions, verifying the implementation of solutions, and controlling further processing delivery of nonconforming products until the deficiency has been corrected. * Ability to be successfully cross trained in all areas. * Training of employees. * Responsible for maintaining and striving to meet Quality metrics. * Communicates regularly to supervisors and managers, suggests and composes procedural changes, maintains a clean, safe work environment, and communicates safety hazards and issues to supervisors. * Generates, accumulates, and handles hazardous wastes generated in daily operations, as directed by the Environmental, Health, and Safety Manager. * Schedules and assigns work within the unit to regulate workflow and meet required scheduled. * Monitors and reacts to multiple datasets in manufacturing such as Critical List, 48 hour list, restart list, etc. * Provides technical assistance and supervision throughout the unit. * Identifies problems in product, equipment, quality, safety. * Supports Truechem schedule as identified * Responsible for meeting department goals, corrective action, and department cleanliness. * Ensures timely responses to all levels of management, including peers. * Immediately communicates any safety or environmental concerns to management as well as recommendations for solutions. * Responsible for environmental, S5, safety and general housekeeping of the department, for the adherence to the quality and continuous improvement policy of the department, for emergency response efforts and evacuation of building personnel, and responsible during an emergency. * Responsibilities include the reporting of all accidents, near misses and safety concerns. Perform their job duties utilizing the required and appropriate personal protective equipment (PPE). Full participation in safety training and the ability to understand and follow the directions identified in Job Safety Analysis (JSA), PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and alerts. Full participation and support in all Dupont Reviews Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Has good English communication skills and mathematical skills. * Has good reading vision, color discrimination, depth perception, hearing perception, and the ability to speak clearly. * Ability to perform routine tasks. * Reads and understands procedures and blue prints. * Must be a team player and must work well with others. * Must adapt to a changing environment. * Ability to work up to 9 hours a day and is flexible to work overtime when needed. * Ability to sit and/or stand for up to 9 hours a day. * Able to lift up to 40 pounds, bending, leaning, pushing, pulling cart. * Has fine motor skills and rapid mental-muscular coordination. * Flexible and able to cross train to work in any position throughout both buildings. * Ability to safely work or come in contact with chemical, physical (noise, etc) or biological agents. * Regular attendance is an essential job function of this position. * Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident. Education: * High school diploma or GED is required. Preferred Experience: 1 Year of PCB experience required, plus proven experience leading a team preferred #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: The Process Technician is responsible to organize, motivate the 2nd shift team and communicate issues to the supervisor; assuming the responsibility of emergency coordinator/IC in the absence of the 2nd shift supervisor. Responsible for quality, workflow, efficiency and communicating company expectations, as well as the inspection of products to ensure quality. The Process Technician will be cross trained in all areas and must be operational on all equipment for the inner layer facility. Duties and Responsibilities: Monitors and produces product quality by initiating actions to prevent the occurrence of product nonconformity, identifying and records any quality problems, initiating, recommending, and providing solutions, verifying the implementation of solutions, and controlling further processing delivery of nonconforming products until the deficiency has been corrected. Ability to be successfully cross trained in all areas. Training of employees. Responsible for maintaining and striving to meet Quality metrics. Communicates regularly to supervisors and managers, suggests and composes procedural changes, maintains a clean, safe work environment, and communicates safety hazards and issues to supervisors. Generates, accumulates, and handles hazardous wastes generated in daily operations, as directed by the Environmental, Health, and Safety Manager. Schedules and assigns work within the unit to regulate workflow and meet required scheduled. Monitors and reacts to multiple datasets in manufacturing such as Critical List, 48 hour list, restart list, etc. Provides technical assistance and supervision throughout the unit. Identifies problems in product, equipment, quality, safety. Supports Truechem schedule as identified Responsible for meeting department goals, corrective action, and department cleanliness. Ensures timely responses to all levels of management, including peers. Immediately communicates any safety or environmental concerns to management as well as recommendations for solutions. Responsible for environmental, S5, safety and general housekeeping of the department, for the adherence to the quality and continuous improvement policy of the department, for emergency response efforts and evacuation of building personnel, and responsible during an emergency. Responsibilities include the reporting of all accidents, near misses and safety concerns. Perform their job duties utilizing the required and appropriate personal protective equipment (PPE). Full participation in safety training and the ability to understand and follow the directions identified in Job Safety Analysis (JSA), PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and alerts. Full participation and support in all Dupont Reviews Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: Has good English communication skills and mathematical skills. Has good reading vision, color discrimination, depth perception, hearing perception, and the ability to speak clearly. Ability to perform routine tasks. Reads and understands procedures and blue prints. Must be a team player and must work well with others. Must adapt to a changing environment. Ability to work up to 9 hours a day and is flexible to work overtime when needed. Ability to sit and/or stand for up to 9 hours a day. Able to lift up to 40 pounds, bending, leaning, pushing, pulling cart. Has fine motor skills and rapid mental-muscular coordination. Flexible and able to cross train to work in any position throughout both buildings. Ability to safely work or come in contact with chemical, physical (noise, etc) or biological agents. Regular attendance is an essential job function of this position. Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident. Education: High school diploma or GED is required. Preferred Experience: 1 Year of PCB experience required, plus proven experience leading a team preferred #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

DescriptionJob Title: Engineer IIDepartment: Engineering Schedule: Monday-Friday 7:30am - 4:00pm Facility location: Charlestown, NH Summary: Plans and designs manufacturing processes for a production facility. Details:Duties & Responsibilities: Responsible for small projects or multiple tasks within functional discipline Makes significant contribution to their team by applying their knowledge of the discipline. Works with moderate guidance on projects with short-term focus Has a solid understanding of the fundamentals of the discipline and role-continuing to develop specialized knowledge. Evaluates mechanical and electromechanical systems and products by designing and conducting research programs, applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials. Confirms system and product capabilities by designing feasibility and testing methods, testing properties. Develops mechanical and electromechanical products by studying customer requirements; researching and testing manufacturing and assembly methods and materials; soliciting observations from operators. Develops manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components. Provides training and ongoing support on manufacturing systems. Will support Electronic Production specific processes such as SMT, Wave Soldering, hand assembly techniques of circuit boards, and inspection requirements. Scope: Requires knowledge and experience in own discipline; still acquiring higher level knowledge and skills. Builds knowledge of the organization, processes and customers. Solves a range of straightforward problems. Analyzes possible solutions using standard procedures. Receives a moderate level of guidance and direction. Education & Expertise: BA/BS degree w/2-4+ years' experience or MA/MS degree w/0-2+ years' experience. Physical Demands and Abilities: Able to lift up to 35 pounds. Regularly performs repetitive task. Able to stand for entire shift. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to communicate effectively with co-workers, supervisors, and third parties. This ability to communicate requires the employee to be conversant in English as the majority of our workforce and the third parties that we encounter only speak English. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All Employees Shall: Comply with the EH&S Policy and applicable regulatory and company EH&S rules and requirements. Report to supervision conditions or practices are either unsafe or that may adversely impact the environment, to ensure prompt resolution of potential hazards. Attend scheduled EH&S training program. Actively support the organization's efforts to meet or exceed EH&S goals and plans. Recommend improved EH&S practices. Must be able to communicate effectively with co-workers, supervisors, and third parties. This ability to communicate requires the employee to be conversant in English as the majority of our workforce and the third parties that we encounter only speak English. The incumbent is responsible for complying with the policies in Whelen's “Employee Handbook”. This Job Description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company's discretion. Nothing in this position description changes or is intended to change the employment at-will relationship with the Company. Employment at-will means that an employee or the Company may terminate the employment relationship at any time, for any reason or no reason at all, with or without notice. Whelen Engineering is an equal opportunity employer and does not discriminate against any employee or applicant for employment based on race, color, religion, national origin, age, gender, sex, ancestry, citizenship status, mental or physical disability, genetic information, sexual orientation, veteran status, or military status.

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! What will you be doing? Standard Fabrication - Utilize machinery to customize fabric belts (measuring, cutting, pressing) to customer specifications. Special Fabrication - Utilize machinery to customize fabric belts (perforations, v-guides, flex cutting) to customer specifications. Automated Fabrication - Utilize multiple automated machines to customize fabric belts to customer specifications. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values is how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher-level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate of $15.85/hour If you are interested in becoming a part of a World-Class Team, submit your application today! RESPONSIBILITIES OF THIS POSITION - CORE: To support the vision, mission and guiding principles of the company. While performing any procedure, all associates and contract personnel must observe applicable Safety, Health, and Environmental rules and guidelines. The use of appropriate personal protective equipment is required. Attend and participate in training opportunities and seminars relevant to this position. Adhere to appropriate company operating procedures, benefit rules, employment policies and safety policies. RESPONSIBILITIES OF THIS POSITION - PRODUCTION: Follows work instructions and is responsible for good quality Grinds tubes and belts. Measures work piece dimensions to assess conformance. Changes sandpaper when required. Initials work order upon completion of job duty and inspection of work performed as acknowledgment of properly completing task. Checks thickness gauges for accuracy. Performs minor machine maintenance such as oiling machines, dies, or work pieces. Notifies Supervisor of any equipment malfunctions or quality problems. Inspects ground tubes to meet work instruction requirements. Performs a combination of production tasks, which may include loading machinery, positioning work, setting up jobs, adjusting and operating machinery. May load and unload materials, parts or products; stock to designated work areas; pack products and may clean surface of machines and work areas. Operates machinery and equipment. Inspects ground tubes to meet work instruction requirements. Reads job specifications to determine machine adjustments and material requirements. Able to access databases as necessary to retrieve work instructions in order to perform work. Maintain own productivity while performing the duties mentioned above. Prepares material to be move to next station. Checks set-ups at beginning of shift to ensure grinder is in proper operating condition. Notifies Supervisor when supplies need replenishing. Follows all safety rule and procedures. Maintain good housekeeping in department. Performs other duties as required.

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Full time only, M-F 8am-430pm, overtime available occasionally. $18.50/hr, going to $19/hr at 90 days. Responsibilities Deliver on production goals, while focused on safety and quality Produce product per recipes and SOP's, maintaining high quality standards Package product into proper containers with proper labeling to ensure compliance with state regulations Ensure all standards for processing procedures and laboratory protocols are followed Compliance with local and state regulations Adherence to quality control methods throughout entire process Documentation of manufacturing methods are created and maintained Electronically convert packaged products in the state traceability system Manage time efficiently to meet goals while consistently producing quality product Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift Exhibit competency in basic organizational skills, communication skills and Windows based operating software Use independent judgment regarding product processing, keeping quality and goals in mind Help create a positive environment by having a positive attitude and by being self-motivated Other duties as assigned Qualifications High School Education or GED graduate; some college or college graduate preferred 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred Equivalent combinations of education and experience may be considered Must be able to work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure, and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI Ability to listen well and communicate effectively with various audiences Ability to perform monotonous tasks with great efficiency without losing qualities Must be able to follow basic instructions and accept constructive criticism Prior cannabis experience not required Additional Requirements Must have a valid driver's license or State ID card Must be a minimum of 21 years of age Must pass all required background checks Must be and remain compliant with all legal and company regulations for working in the industry Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil).

LiquidPiston is transforming aerospace propulsion with its breakthrough rotary engine technology. As we expand into fixed-wing UAV and aircraft applications, we're building a world-class manufacturing team to deliver advanced aerospace components with precision and performance in mind. Join us in pioneering the future of flight. Position Overview We are seeking a Composite Manufacturing Specialist/Technician to lead the hands-on fabrication of carbon fiber, Kevlar, and epoxy components for fixed-wing UAVs and aircraft. The ideal candidate will be highly skilled in composite layup and mold-making, with an eye for craftsmanship and a passion for high-performance materials. This role involves working closely with engineers to develop a dedicated composite manufacturing space, processes, and prototypes-turning ideas into flight-ready parts. Key Responsibilities Fabricate high-quality composite components (e.g., wings, fairings, and other structural elements) using carbon fiber, Kevlar, and epoxy systems Design and build molds for composite layups, including plug construction, tool prep, and vacuum bagging Comfortable with hand lay-up, vacuum bagging, Resin Transfer Molding (RTM), autoclave modeling, and compression molding techniques. Collaborate with engineering staff to develop manufacturing workflows, workspaces, and specialized tools Perform field repairs, composite part modifications, and rapid design iterations Ensure a clean, safe, and organized shop environment with a focus on consistent, top-tier fabrication quality Maintain documentation for fabrication processes, material usage, and design changes Qualifications Proven hands-on experience in composite fabrication-ideally from aerospace, marine, motor sports, or performance product sectors Strong portfolio showcasing past projects and physical components (photos required) Skilled in mold-making, layup, vacuum bagging, and finishing techniques High attention to detail with a commitment to producing both mechanically sound aesthetically pleasing parts Self-driven, reliable, and focused on quality and committed to deadlines Excellent organization, cleanliness, and shop discipline are essential Preferred Skills Experience with FEA (Finite Element Analysis) and structural optimization of composite components Comfort with CNC machining, hand tools, and general shop equipment Familiarity with small aircraft or UAV structures and aerodynamic design principles Benefits & Perks Flexible PTO: We value work-life balance and encourage time to rest and recharge. Health & Wellness: Comprehensive medical, dental, and vision coverage-you choose what works best for you. Equity Participation: Permanent employees receive RSUs (Restricted Stock Units). 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening.

Employment Type: Contract Duration: 6 months with likely extensions Note: This is a hybrid role (Onsite and remote) 3 Key Consulting is hiring a Manufacturing Specialist Investigator for a consulting engagement with our direct client, a leading global bio-pharmaceutical company. Job Summary: Operations is currently seeking a Manufacturing Specialist Investigator (External worker) in our site Investigation group. In support of companies mission to serve patients, we are a diverse team working to continuously improve our clinical and commercial drug Substance Operations to ensure supply and to optimize the patient experience. The Manufacturing Specialist Investigator - conducts technical investigations from our clinical and commercial drug Substance Operations. This role understands the investigation process as well as manufacturing processes for the Rhode Island Facility. The Manufacturing Specialist Investigator owns major and trend deviations to support identifying root cause and will also participate in multi-functional idealization of design solutions (CAPAs). Also maintains close interaction with the Manufacturing leads, engineering, Process Development, Quality Controls, Supply Chain, and quality functions to mitigate product impact and contribute to product/process improvement. Basic Qualifications: Doctorate degree OR Master's degree and 3 years of Bio pharmaceutical Operations experience OR Bachelor's degree and 5 years of Bio pharmaceutical Operations experience 2+ years of experience in investigation process industry experience, non academia within biopharm environment Must have previous technical writing experience, experience In investigation process (RCA) and Drug Substance Experience Demonstrate understanding and application of Drug Substance process, data mining, Microsoft office tool, Quality and compliance. Strong technical writing and interpersonal skills (able to influence tri functional team and organizational leads) Ideal Candidate: Previous client Experience Demonstrated Six Sigma proficiency specifically for root cause analysis methodology Experience in leading continuous improvement activities by driving the implementation of process and product quality improvement initiatives Top Must have Skill Sets: 2+ years of proven ability in investigation process Strong technical writing Proven Six Sigma proficiency specifically for root cause analysis methodology Understanding and application of Drug Substance process, data mining, quality and compliance. Day-To-Day Responsibilities: Manage investigation process such as coordinating meetings, gathering evidence, data mining, performing interviews Employee Value Proposition: Growth, opportunity, experience Red Flags: No previous experience in drug substances or investigation process Interview Process: 1-2 panel interview We invite qualified candidates to send your resume to **************************. If you decide that you're not interested in pursuing this position, please feel free to look at other positions on our website *********************** You are welcome to also share this posting with anyone you think might be interested in applying for this role. Regards, 3KC Talent Acquisition Team

Senior Production Technician - CT About Relevate Power Relevate Power is on a mission to become the most trusted 24/7 renewable energy provider in rural and suburban America. We develop, acquire, and operate hydropower, solar, and energy storage projects-delivering clean, reliable energy to local organizations while prioritizing environmental health. Our culture is built around a commitment to excellence, people development, and responsible asset management. We live by our values: growing people through our company, keeping our word, maintaining safe spaces, making data-driven decisions, embracing innovation, and achieving meaningful results. Join us in shaping the future of renewable energy and uplifting the communities we serve. Position Overview As a Senior Production Technician on the Plant Operations team, you will be a hands-on leader responsible for the safe and efficient operation, maintenance, and repair of hydropower plant equipment and systems. In addition to technical expertise, you'll play a key mentoring role-guiding junior technicians and setting high standards in safety, reliability, and performance. Your leadership and technical acumen will be instrumental in advancing our clean energy mission and ensuring the operational excellence of our facilities. Key Responsibilities Lead the safe operation, monitoring, and maintenance of hydropower generation stations. Perform and oversee complex maintenance, troubleshooting, and repair tasks on turbines and associated systems. Supervise gate changes and ensure accurate, timely documentation. Monitor and report critical conditions and instrument readings during periods of significant runoff to support real-time decision-making. Plan and execute station and dam operations with strict adherence to safety protocols. Diagnose and resolve hydraulic, electrical, and mechanical issues; provide technical recommendations. Lead the implementation of a comprehensive equipment quality assessment and issue reporting program. Act as a contractor liaison as needed, reporting to supervisors or project managers. Ensure team compliance with Health, Safety, Security, and Environmental (HSSE) protocols. Operate in compliance with FERC regulations and support site readiness. Provide guidance, training, and mentorship to junior Production Technicians. Set and model high standards in adaptability, professionalism, and response to emergencies or shifting priorities. Support operational continuity by being available for on-call duties, overtime, and emergency call-ins. Maintain flexibility to work at multiple stations, promoting collaboration and operational efficiency. Embody and promote Relevate's values, supporting team cohesion and continuous improvement. Qualifications 5+ years of experience in hydropower operations with strong mechanical and electrical troubleshooting skills. Background in technical training, the military, or a relevant industry strongly preferred. Proficiency in reading and interpreting complex schematics (electrical, hydraulic, mechanical). Hands-on experience in rigging, lifting, welding, and electrical repair is a plus. Demonstrated leadership, mentoring, and problem-solving abilities. Strong communication skills and ability to thrive in both independent and collaborative environments. Valid driver's license and willingness to travel regionally, including occasional overnight stays. Proficiency with Microsoft Office Suite, including Outlook. Experience with hydro turbine/generator systems, industrial electrical systems, and PLCs is strongly preferred. Familiarity with PLC programming and troubleshooting is a significant advantage. Benefits Competitive salary commensurate with experience Comprehensive benefits package including: Health insurance Paid time off (PTO) 401(k) plan Bonus and/or equity opportunities Professional development support and career advancement opportunities Join Relevate Power and help lead the way in transforming America's renewable energy landscape-one community at a time. Must be authorized to work in the US for any employer.