Manufacturing technician jobs in Phoenix, AZ - 325 jobs

About the Role Join a leading electronics manufacturing team as a Fabrication Operator! In this role, you'll work in a cleanroom environment to produce high-quality electronic components using advanced equipment and processes. If you're detail-oriented, safety-conscious, and thrive in a fast-paced setting, this is the opportunity for you. Key Responsibilities Operate and monitor fabrication equipment according to standard operating procedures. Prepare materials and tooling to meet applied standards. Perform periodic quality checks and visual inspections based on device-specific criteria. Record and maintain accurate production data. Identify and address non-compliant materials or abnormal events per specifications. Collaborate with maintenance and engineering teams during shifts. Contribute to process improvements and participate in working groups. Ensure compliance with Environmental Health and Safety regulations. Meet production targets using effective decision-making and prioritization. Qualifications High school diploma or equivalent required. Previous experience in manufacturing or cleanroom environments preferred. Ability to follow detailed instructions and maintain high attention to detail. Strong communication and teamwork skills. Comfortable working in a shift-based schedule. Schedule: 1st Shift: 6:00 AM - 2:30 PM (Mon-Fri) 2nd Shift: 2:00 PM - 10:30 PM (Mon-Fri) Compensation: $25/hr Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

The Manufacturing Associate will be assigned to operate safely a variety of equipment such as palletizers, wrappers, forklifts and other related equipment within the Plant. (S)he will contribute to the overall department production goals and maintain a clean and safe work environment. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: * Closely monitor the dairy production process * Perform changeovers as needed per the production schedule. * Troubleshoot and resolve basic to moderate operating difficulties and communicate all issues related to maintaining and operating equipment in a timely manner. * Clean equipment and perform other routine maintenance as assigned by Maintenance or the Supervisor * Reassemble equipment after maintenance, clean up, and changeovers * Operate all equipment following SOPs/training materials and adjust equipment, as needed, to efficiently and effectively operate the production line with minimal down time. * Follow Quality Assurance standards and collect required samples, as needed, for Quality Assurance testing * Ensure all paperwork is filled out in a clear, legible and accurate format, and completed with required information. * Follow all required work safe practices. This would include compliance of Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. * Other duties as assigned Qualifications: * High school Diploma or GED preferred * Experience working in manufacturing plant a plus but not required * Ability to add, subtracts, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. * Fluency in English; ability to communicate when necessary to complete duties, read and write * Ability to work in a cold and wet environment for prolonged periods of time. * Ability to work in various temperature-controlled zones ranging from cold to hot * Flexible and willing to work the demands of the department which may be subject to evenings, nights, weekends and holidays. * Must be able to frequently reach up to 31-77 inches. Physical Demands: * Regularly stand; walk; stoop, kneel, crouch, climb, or crawl * Ability to reach and handle objects, tools, or controls * Occasionally sit and occasionally climb ladders or work on a platform * Regularly lift and /or move up to 50 pounds Corporate Summary At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Sirius Staffing is a Manufacturing Technician for a contract-to-hire opportunity in Chandler, AZ.Schedule: rotating 12-hour shifts (days: 6:00 am-6:00 pm; nights: 6:00 pm-6:00 am), including holidays, weekends, and on-call schedules.Pay:$ 28.50 - $32.00/ hour.Summary: The Manufacturing Technician supports systems of chemicals and controls throughout the site. This role is highly hands-on, physically demanding, and requires strong attention to safety and teamwork. Technicians receive comprehensive safety and on-the-job training under the guidance of a Senior Technician before being assigned to work in partnered teams.Responsibilities: Perform chemical handling duties, including changing 150+ drums, bottles, totes, bulk tankers, and cylinders per shift. Climb tanker trucks using fall protection to offload chemicals into drums as needed. Navigate physically demanding tasks such as walking 5-6 miles per day, climbing ladders, lifting 25-50 lbs., bending, and maneuvering in tight spaces. Develop functional proficiency in site equipment, including chemical, slurry, and gas delivery systems. Assist with equipment troubleshooting, basic system adjustments, and technical support following training. Perform noninvasive preventative maintenance using documented procedures and maintain accurate electronic equipment logs. Follow all safety, hazardous communication (“Right to Know”), and site compliance requirements. Maintain dependable attendance and provide at least a two-hour notice if unable to report to a scheduled shift. Qualifications. High School Diploma. Strong mechanical aptitude with troubleshooting skills; technical, electronics, military, or hands-on experience preferred. Willingness to perform physical labor associated with drum and cylinder movement. Full PPE (hard hat, safety glasses, earplugs, gloves, chemical apron, etc.) is provided. Workers receive vouchers for required safety boots. Must pass a Fit for Duty Evaluation prior to reporting and annually, including Pulmonary Function Test for respirator use, audiogram baseline, and physical exam. Ability to Use a Supplied Contained Breathing Air Respirator for short periods (10-15 minutes) while working with designated chemicals Ability to work both day and night shifts-candidates interested in only one shift will not be considered. Sirius Staffing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to characteristics such as race, color, national origin, religion, gender, age, marital status, disability, veteran status, citizenship status, sexual orientation, gender identity, or any other status protected by law.

Job Title: Assembly Manufacturing Technician Company: Custom Control Sensors, LLC Employee Type: Full Time - Non-Exempt Industry: Manufacturing Job Type: Assembly Education: High School Diploma or GED Experience: Three or more years of training in a similar industry or some technical training is required Company Overview Custom Control Sensors, LLC (CCS) is a global leader in the design, development, manufacturing and supply of pressure, temperature and liquid flow switches and sensors for the Aerospace, Defense and Industrial markets. Since 1957, CCS has been providing high reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle pioneered by Custom Control Sensors. CCS' Airborne Division provides standard and custom switches, sensors and transducers to the aerospace, defense, commercial aviation and government markets. CCS also supplies original PMA parts for various Boeing, Airbus and business aviation aircraft. CCS' Industrial Division provides pressure and temperature switches, sensors and transmitters for process control of global oil & gas, petro-chemical, power generation, steel manufacturing, tire manufacturing, automotive, medical and various other industrial equipment. CCS is an ISO 9001and AS 9100 certified company. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. CCS is a growth-orientated company focused on building an energetic and vibrant work environment. We work to foster the interaction and collaboration between all associates at CCS, the connection with our customers and the opportunity for creativity. CCS is an established company with global resources offering individual opportunities to affect positive change. One person can make a great impact on our company's success Job Description: Under general supervision, employee performs a variety of production assembly operations on electronic components and final assemblies. Employee will also support activities of final assembly employees who perform final assembly operations. Employee should have familiarity with all lines in final assembly and be knowledgeable on all related processes. Employee should possess ability to clearly articulate direction to line employees and clearly express what expectations are. Employee should have 3 years or more of direct experience in a leadership role to develop into a lead role; fully trained in all aspects of teamwork and capable of training others. Employee will provide support with day to day line operations (release of jobs, meeting deadlines, maintain quality etc.) and assist in cross training for all final assembly lines. Coordinates and supports Final and Sub-Assembly departments with troubleshooting issues in addition to assisting Engineering with prototyping/development of new models. Individual will also be responsible for generating ECR's, creating and revising work instructions, writing travelers and other technical support related tasks. Key Responsibilities: Performs bench production assembly of products or parts, and the setting and synching of assembled parts; Keeps quality up to acceptable standards with little discrepant work; Performs tasks equal to or exceeding established standards; Accomplishes production quotas; Ability to read, write and follow written and verbal instructions in English; Ability to work well with only a modest amount of repeated instructions; Keeps work areas clean and orderly; Ability to work with high and low pressure systems and using different type of media (air, hydraulic, skydrol, and water) to perform the job in a safely manner Spoken communication clearly, listen carefully and seek clarification; Written communication clearly and concisely; Good computer skills, including Microsoft word, excel, and outlook Ability to read and interpret documents such as safety rule, operation instructions, ability to work from specifications, travelers and blueprints; Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form; Working consistently, working overtime and traveling, if required; Troubleshooting in Final and Sub Assembly areas Assisting Engineering with prototypes and developments of new models Skills and Requirements: Applicant must be ITAR compliant; Performs visual inspection of all parts and components just prior to assembly; Ability to acquire proficient knowledge of all Line operations; Typically supports a team of more than 8 people, may lead multiple lines/work cells Good understanding of electronics in general Ability to work with Electronic devices such as multi-meters, dielectric, insulation resistance, and output check equipment. Aware of Electrostatic Discharge (ESD) requirements. Adequate manual dexterity to safely and proficiently utilize standard production small hand tooling and fixtures; Ability to react to changes productively and perform other essential tasks as assigned Conducts himself/herself in a business-like and civil manner; Ability to handle day-to-day work challenges, adapt to changes in the work environment, manages multiple tasks and competing demands, change method to best fit the work situation; Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand, sit, walk, flex/extend hands, fingers, with opposition of thumb-palmar grasp bend, stoop, reach, turn, twist, push, pull, talk, hear and to move within all areas of the facilities and parking lots. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, color vision, depth perception and the ability to adjust and focus. An annual eye exam may be required. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline, and termination. No recruiters or recruitment agencies.

About Medivant Healthcare Medivant Healthcare is a U.S.-based pharmaceutical manufacturer specializing in the production of sterile injectable medications for hospitals, clinics, and healthcare systems nationwide. With FDA-registered facilities in Chandler and Deer Valley, Arizona, we are committed to ensuring quality, safety, and operational excellence in every stage of our manufacturing process. Position Summary The Cleanroom Manufacturing Technician is responsible for performing production and assembly activities in a controlled cleanroom environment. This role supports the manufacturing of sterile injectable products, ensuring all work is performed safely, accurately, and in compliance with FDA regulations, cGMP, and USP / standards. This is an excellent opportunity for individuals looking to start or grow a career in pharmaceutical manufacturing - full training will be provided. Shift Timings - (M - F) 12:00 PM - 8:00 PM (US - Arizona Time) Key Responsibilities Perform aseptic manufacturing and filling operations under cGMP and cleanroom guidelines. Prepare equipment and materials for sterile production, following established SOPs. Maintain cleanroom cleanliness and adhere to strict gowning procedures. Operate and monitor production equipment such as fillers, autoclaves, and lyophilizers (training provided). Assist with component preparation, labeling, packaging, and in-process inspections. Accurately complete production documentation, logbooks, and batch records. Follow all safety, quality, and compliance standards to maintain product integrity. Communicate effectively with team members and supervisors to ensure efficient workflow. Participate in ongoing training for cGMP, aseptic technique, and cleanroom operations. Qualifications High school diploma or equivalent (GED). Strong attention to detail and commitment to quality work. Willingness to follow procedures and work in a cleanroom environment. Dependable, team-oriented, and punctual. Ability to stand for long periods and perform repetitive tasks safely. Preferred (but not required): Previous experience in manufacturing, compounding, or cleanroom production. Familiarity with cGMP or FDA-regulated environments. Technical or vocational training in manufacturing, science, or healthcare fields. Work Environment Onsite role at Medivant Healthcare's Chandler and Deer Valley facilities. Controlled cleanroom environment with full aseptic gowning and PPE. Requires standing, lifting (up to 25 lbs), and manual dexterity. Full-time position, Monday-Friday, with potential overtime or occasional weekend shifts. Compensation & Benefits Hourly Rate: $20 - $25, based on experience. Medical, dental, and vision insurance. 401(k) with employer match. Paid time off and company holidays. Opportunities for advancement within manufacturing, quality assurance, or maintenance.

We have an exciting opportunity at our Mesa, Arizona facility for a Manufacturing Technician in our CMP slurries group! Our CMP Manufacturing Technicians support receiving and cleaning containers, monitoring distillations, and packaging containers. Company Overview FUJIFILM Electronic Materials, U.S.A. fuels innovation in the semiconductor industry-where chemistry meets technology. Our advanced materials and formulations enable manufacturers to build the microchips that power Artificial Intelligence, computers, electric vehicles, smartphones, and more. We're a global business-to-business supplier of chemical formulations and advanced materials used for manufacturing and packaging semiconductors. Our chemical formulations allow top manufacturers to produce microchips that both power and connect our digital world. Think you've got what it takes to build a more connected world? Then connect with us today and challenge the boundaries of what's possible-for the world and your future. We have six U.S. manufacturing and Research & Development facilities, located in: Mesa, Arizona; Castroville, California; Hollister, California; Carrollton, Texas; and North Kingstown, Rhode Island-each offering unique local experiences, from vibrant cultural scenes to historic charm. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description RESPONSIBILITIES Prepare new drums and totes for filling, including labeling. Fill and package drums and totes. Sample and test production material. Charging and monitoring process tanks. Obtain forklift certification and perform material handling operations as assigned. Correctly document containers processed as required by standard operating procedure, including manual and electronic logs, forms, and labels. Operate manual and automated equipment in support of job functions. Must be capable of making necessary mechanical connections for tank systems. Communicate equipment status and outages to the lead and other supervision, as needed for correct, safe operation. Assist maintenance to troubleshoot and operate equipment for repair activities. Maintain job associated certifications and tasks above the basic level. Maintain EHS and other facility training current. Assist with operational, quality, and safety reviews, as assigned. REQUIREMENTS High school diploma or GED Strong Communication skills Demonstrated abilities to work independently and as a team 0-2 years manufacturing experience in related industry Strong troubleshooting skills Strong mechanical aptitude a plus Good computer skills a plus Ability to lift at 60 lbs. Ability to push and pull up to 50 lbs. Perform other duties, as assigned. Excellent communication and customer service skills Ability to work well with others at all levels of the organization Must have a valid Arizona drivers' license and clean driving record Ability to work varied shifts to include 1st, 2nd, and 3rd shifts, including weekends This is a safety-sensitive position that requires candidates to successfully pass a post-offer drug screening prior to employment. One of the essential job functions is the ability to work in a constant state of alertness and in a safe manner. ADDITIONAL REQUIREMENTS We value a professional, adaptable, and collaborative work environment. The following competencies are essential for success in any role and reflect our commitment to effective teamwork, problem solving, and workplace communication. Resilience -Ability to adapt to workplace challenges, maintain professionalism, and manage responsibilities effectively. Communication -Capacity to clearly and professionally exchange ideas, interact respectfully with colleagues and customers, and foster positive workplace relationships. Reasoning & Decision Making -Ability to analyze information, follow verbal and written instructions, and make logical, sound decisions. Comprehension -Capability to understand and complete tasks as assigned and solve problems effectively. Organizational Skills -Competence in managing multiple priorities, maintaining accuracy, and staying focused despite potential workplace distractions. To all agencies: Please, no phone calls or emails to any employee of Fujifilm about this requisition. All resumes submitted by search firms/employment agencies to any employee at Fujifilm via-email, the internet or in any form and/or method will be deemed the sole property of Fujifilm, unless such search firms/employment agencies were engaged by Fujifilm for this requisition and a valid agreement with Fujifilm is in place. In the event a candidate who was submitted outside of the Fujifilm agency engagement process is hired, no fee or payment of any kind will be paid. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (********************************).

AZ AFO is hiring full time entry level and experienced technicians. We manufacture lower extremity braces that help people to walk. Come work for a company that helps to make a difference in people's lives. This is a position that you can grow in and develop specialized skills. You will learn to model products on a computer or fabricate products by hand. Duties and Responsibilities: Fabrication & Repair: Build, assemble, and repair orthotic and prosthetic devices according to specifications and clinical direction. Customization: Modify and adjust braces and orthotics to ensure proper fit and function for individual patients. Operate Production Equipment: Run and monitor machines and tools used in the fabrication process, including saws, drills, heat guns, and sanders. Quality Inspection: Conduct checks on devices and components to ensure workmanship and functionality meet required standards. Material Handling: Understand and work with various materials such as plastics, foams, carbon fiber, and metals used in medical devices. Collaboration: Communicate and work closely with clinicians and team members to meet patient needs and resolve production challenges. Record Keeping: Complete production logs and quality forms accurately and on time. Maintenance & Clean-Up: Perform regular equipment maintenance, workspace organization, and general clean-up duties. Follow Safety Procedures: Adhere to OSHA safety guidelines, wear PPE, and help maintain a safe work environment. Requirements and Qualifications: Previous manufacturing or fabrication experience is a plus but not required. Good hand-eye coordination and attention to detail. Comfortable using hand tools, power tools, and measuring equipment. Ability to stand, bend, lift up to 40 lbs., and perform repetitive tasks for extended periods. Basic math and measurement skills. Ability to read and follow work instructions in English and safety guidelines. Education and Experience: This is an entry-level position with full training provided. Strong teamwork and communication skills. Willingness to learn, take direction, and grow within the role. Dependable attendance and punctuality Working conditions: Work is performed inside a manufacturing facility that may include production floors, warehouses, and mechanical areas. Employees may be exposed to noise, moving machinery, dust fumes, and varying temperatures. Hearing protection, respirators, or other PPE may be required depending on the task. Employees must follow all OSHA and company safety rules. Physical Demands: Standing: Required for up to 6-8 hours per shift while operating machinery or working at benches. Walking: Frequent movement throughout the production area, including between workstations, equipment, and storage locations. Lifting/Carrying: Regularly required to lift and carry materials weighing up to 30 lbs., including tools, plastic components, and leather materials. Work may involve exposure to lubricants, solvents, cleaning chemicals, and other industrial materials. OHI is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.

Job Description Provide direction to manufacturing personnel in order to meet quality, cost and delivery expectations of our customers as well as maintain a clean and organized working environment for our associates. The Process Technician/Lead will accomplish this by consistent application of company policies, procedures and guidelines, communicating manufacturing-related goals and objectives including quality, throughput, customer service, on-time delivery, as well as participation in on-the-job training for associates, disciplinary & attendance tracking. This position is responsible for molding plastic parts in accordance to company requirements and standards. This includes machine set-up, secondary equipment set-up and input process parameters. All associates are expected to perform all activities in a safe manner and to report any safety concerns or injuries immediately. Essential Duties and Responsibilities: Monitor & maintain people requirements/assignments for manufacturing personnel Disposition of attendance & disciplinary issues Communicate with & train production personnel regarding customer & company expectations Facilitate the implementation of corrective action for non-complying products Monitor/track SPC & quality reports for shift Daily Shift Reporting Review, analyze and implement corrective action related to daily manufacturing results Provide direction and review performance of manufacturing personnel Coordinate all manufacturing efforts to meet required production schedule Monitor expense controls and implement corrective action as required Maintain a clean and well-organized work environment Manage the scheduled production at established efficiency and utilization standards and complete daily shift audits Manage the material flow, inventory control, quality program, scrap, safety and cleanliness of the production floor Manage and improve employee engagement Maintain staff by interviewing, selecting, and overseeing training of associates Conduct Performance Reviews Resolve employee issues by analyzing data; investigating issues; identifying solutions; and taking action as appropriate Ensure operators document production by press for your shift and audit the previous shifts prior to entering data for IQMS Set-up the injection mold presses and install molds according to specifications Read specifications and set machine controls, regulating prescribed molding temperature, volume of plastic, molding time and pressure Provide input of injection molding process and equipment for the reduction of defects, overall process improvement and the reduction of downtime Inspect and evaluate parts for quality Communicate and translate what is happening from a molding standpoint to engineers and management Monitor and troubleshoot molding process; observe equipment and materials in process to analyze and determine cause of malfunctions Make adjustments to equipment to obtain desired results Responsible for machine start-ups First response to all machine, robot, thermolater and secondary equipment alarms Ensure machines and robots are running at optimum efficiency Responsible for the accurate completion of Process Verification Troubleshoot machine, mold and material problems Provide mold and fixture preventative maintenance Store and document molds and fixtures Change mold inserts (as equipment requires) Change secondary equipment inserts and nesting Diagnose (troubleshoot) secondary equipment problems Maintain a positive and cooperative attitude with co-workers, employer, customers and suppliers Uphold a strong desire to learn new and changing technologies Perform activities in a safe manner Must know and properly use all aspects of the company LOTO program for an authorized employee Must possess a Cinova Medical issued forklift license. Must understand and be competent in all aspects of QS 9001 and ISO 13485 as it relates to the injection molding process and production activities Must have acceptable attendance record Ability to train subordinate(s) Must attend all mandatory company meetings and safety education sessions Perform any other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 3-5 years experience in a plastics manufacturing environment Experience in 5S, continuous improvement, and Lean Manufacturing processes Strong interpersonal skills with the ability to successfully lead a team and resolve issues relating to personnel, quickly and efficiently Exceptional communication skills Organizational and time management skills Working knowledge of various types of manufacturing machinery and tools Proven problem solving abilities and critical thinking Proficient computer skills Must be fully trained and perform the following duties efficiently within IQMS: Real-Time Production Monitoring Production Reporting Scheduling Shop Calendar Work Centers Verify the job has been downloaded Enter start-up rejects Production monitoring Process monitoring Work Orders monitoring Production Scheduling monitoring Plastic Injection molding background with a minimum of three years of experience in plastics processing A high level of ability to troubleshoot processing problems and make adjustments to make good parts is a requirement Ability to work independently and within a group using good judgment in decision making processes Ability to give proper and accurate instructions as well as receiving input Ability to multi-task, deliver and meet deadlines Strong Mechanical Aptitude and troubleshooting skills Effective oral and written communication with a wide variety of people Understand and follow work rules Reading, writing, and basic math functions, i.e. addition, subtraction, multiplication, division and percentages Education/Experience: High School Diploma or GED Knowledge and experience in production and manufacturing processes and techniques Knowledge of quality systems and standards, including ISO-9001 and/or ISO-13485 Knowledge of health and safety standards and compliance Knowledge of computers and working within IQMS 3-5 years of plastic injection molding experience Full understanding of injection molding and molding principals Knowledge of computers and working within IQMS Knowledge of injection molding process Scientific molding experience is a plus Language Ability: Ability to read, write, understand and follow instructions in the English language. Effective oral and written communication in the English language. Certificates and Licenses: Forklift Certification Lockout/Tagout Certification Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical machine shop environment, requiring safety glasses and steel-toed boots. Employees are required to follow company policies and procedures (located in the company handbook) related to proper dress attire and safety. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Standing and walking for periods of eight hours at a time Reaching, feeling, handling, grasping, twisting and turning Feeling part inconsistencies and variances by touch; using your fingers Lifting, carrying, pushing and or pulling heavy objects, no limit on weight but most use good judgment on how things are moved and what assisted means are utilized Ability to distinguish colors and shading If the associate requires corrective vision lenses, they must have and use them to be able to perform the part quality inspections Good communication skills with the ability to speak and perceive others clearly Job Type: Full Time **This is a 2nd shift position (hours are 3:00pm-11:30pm) Monday through Friday** Benefits: Medical; Dental; Vision; Life; STD; LTD; 401(k) with company match; Paid Time Off; Paid Sick Time Cinova Medical, Inc. is an Equal Opportunity Employer and a Drug Free Workplace. Upon hire, Cinova Medical, Inc. uses E-Verify to verify employment eligibility for roles based in the United States.

Contract, Temporary Description Candidates will need to have intermediate to advanced mechanical skills, must be able to read and understand detailed work instructions, drawings, schematics, and they will need to be able to pay specific attention to detail. Aerospace component manufacturing experience is preferred, but not required. Key Responsibilities Verify kits for correct part numbers and quantities. Collects process data on check sheets or other quality data sheets Conducts daily maintenance of tools, fixtures, and workstations Follow MOS's (Manufacturing Operation Sheets) Perform assembly duties of units per assembly drawings and work instructions Knowledge of manufacturing assembly and equipment Must be able to read and understand work processes and drawings Aerospace Manufacturing experience (a plus) Blueprints, schematic Hand and power tools Assembly/Sub-Assembly Soldering (a plus) Install electronic components, jumper wires, and hardware using drawings and instructions or assembly Requirements We need the person to be mechanical - able to assemble from blue prints; if the applicant is mechanically skilled to “work” on computers, they may have the technical mechanical skills to perform the assignment. Salary Description Min $22-$24

At Kelly Services, we work with the best. Our clients include 99 of the Fortune 100 TM companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. Job Description compensation: $14.00 to $15.00 an hour employment type: contract Kelly Services has numerous Manufacturing Technician (General Labor) roles currently available, working (12+ months in length) on-site at a Chandler, AZ high-tech manufacturing global corporation. Job Duties: Employees will work in a fast paced environment, enabling movement of materials between Fabs. Must possess the ability to push transport carts long distances between fabs. Carts require approximately 50 lbs. of force for movement. Must have the ability to walk long distances throughout the manufacturing facility. Distances could be up to a quarter mile at any given time. Employees will be walking and standing their entire shifts. Job Requirements: Requires a high level of safety awareness and adherence to Intel safety procedures and processes as well as adherence to policies required in a Clean Room environment. Must have demonstrated verbal and written communication skills. Possess basic Math skills Ability to work with minimal supervision Ability to adapt to rapidly changing priorities Ability to produce results in a timely manner Self-starter capable of managing own activity and supporting team activity High School Degree is Required Pay Rate: $14 hr. day shift and $15 hr. night shift Long-term opportunities, potential for growth (No guarantees, huge ramp-up!) As a Kelly Services employee, you will also receive great benefits, including: Performance incentives with our exclusive Kudos! program Optional health benefits, including medical, dental, vision, and prescription drug coverage, short-term disability, and group life insurance Competitive weekly pay with direct deposit or payroll card Please note that this position is not recruited for by the local office. If you are interested in this opportunity, please apply to this posting. Additional Information All your information is kept confidential as per EEO standards. Why is this a great opportunity? The answer is simple…working at our client is more than a job; it's a career. The opportunities are diverse whether you are right at the start of your career or whether you are looking for new challenges this is the job for you, so be quick and apply now!

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Moveras, LLC is one of the largest and most respected automotive remanufacturing companies in the country. We specialize in delivering high-quality, sustainable solutions for the automotive industry, providing remanufactured products that meet the highest standards of performance and reliability. As a fast-paced, innovative leader in the field, Moveras is committed to excellence and continuous improvement. We are currently seeking top talent to join our dynamic team. If you have a keen attention to detail, a passion for precision, and thrive in a fast-paced environment, we want to hear from you. At Moveras, we believe in investing in our employees and providing opportunities for growth in a collaborative, forward-thinking workplace. Join us and be part of an industry leader shaping the future of automotive remanufacturing. Job Title: Manufacturing Engineering Tech Responsibilities: Provide vital support to production/manufacturing/quality engineers on various tasks, ensuring efficient operations. Conduct inspections of sub-assemblies and finished goods prior to their release from the manufacturing cell, maintaining high quality standards. Read and evaluate blueprints Execute defined experiments as outlined. Gathering, maintaining, formatting, compiling, manipulating, and basic analysis of basic technical data to drive improvements. Assist in the planning and implementation of manufacturing engineering process and design changes to optimize plant operations. Troubleshoot and implement continuous improvement strategies involving the repair, modification, and testing of mechanical, electronic, and electro-mechanical devices, assemblies, and production equipment. Utilize knowledge of machine controls, hydraulics, pneumatics, and CNC operations to drive improvements in those methods and enhance employee training and knowledge. Maintain process controls to ensure that equipment and operations are performing according to design specifications. Utilize Microsoft Office and ERP systems to manage tasks and data. Continuously monitor/audit process adherence on the shop floor, providing real-time guidance to employees to ensure alignment to establish standards/methods. Work under general supervision, applying intermediate skills while adapting new procedures and techniques. Utilize limited experience and judgment to plan and achieve assigned tasks and goals, solving basic problems as needed. Support the orientation, training, and oversight of other employees, ensuring team alignment and productivity. Engagement/Oversite of the manufacturing training team ensuring system cohesion, adherence, and improvement. Engagement of the training team, ensuring improved efficiency and effectiveness of the training process overall. Performs other duties or special projects as required or as assigned by leadership Required Skills/Experience: Proven experience as a manufacturing floor lead, demonstrating leadership in a production environment. Strong ability to engage with team members and drive operational excellence. Solid communication skills Working knowledge of machine controls, hydraulics, pneumatics, and CNC operations. Training of personnel inside a manufacturing setting Preferred Skills/Experience: Additional experience in Lean Manufacturing methodologies. “Train the trainer” training certification Spanish speak/write/translate a strong plus Associate degree a plus, Engineering or science a strong plus

Work Schedule: Tuesday to Saturday, 1:00 PM to 9:30 PM. A shift differential will be provided. This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures Dismantle machines and equipment to gain access to problem areas Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures Inspect and measure parts to detect wear, misalignment, or other problems Remove and/or replace worn or defective parts Other duties as assigned. Qualifications: High School Diploma or GED preferred 1+ years of commercial or industrial maintenance experience or experience in a related field Experience with low and high voltage electrical systems Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. Must be able to frequently reach up to 31-77 inches. Physical Demands: Regularly lift and/or move up to 25 pounds Frequently lift and/or move up to 50 pounds Occasionally lift and/or move up to 100 pounds Regularly stand; walk; stoop, kneel, crouch, climb, or crawl Ability to reach and handle objects, tools, or controls Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to “treat associates like family and customers like friends.” Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Full-time Description ABOUT THE COMPANY WT Burnett is known for delivering custom, high-performance foam and nonwoven solutions to some of the world's most respected brands. Our success is built on innovation, quality, and a commitment to teamwork - the same qualities we look for in our people. We are looking for an Electromechanical Technician to join our WT Burnett - Fiber team in Phoenix, AZ! JOB SUMMARY The Electrician is responsible for maintaining, troubleshooting, repairing, and installing electrical and electronic systems supporting production and facility operations. This role ensures equipment reliability, safety compliance, and optimal plant performance by diagnosing system failures, performing corrective actions, and supporting continuous improvement initiatives across the Fiber location. JOB FUNCTIONS/DUTIES Diagnose, troubleshoot, and repair electrical, electronic, and mechanical components of production equipment and facility systems. Troubleshoots and repairs electrical (24V-480V) and PLC control systems (Allen Bradley & Siemens) Troubleshoots hydraulic and pneumatic systems Reads PLC ladder logic and function block logic to troubleshoot and repair Interpret and apply electrical schematics, blueprints, wiring diagrams, and control documentation. Inspect, test, and evaluate electrical systems, drives, motors, PLC components, and control panels. Disassemble and reassemble machines and electrical systems to replace defective or worn components. Install, modify, and commission new and existing electrical equipment using proper tools, materials, and methods. Perform calibrations, alignments, and adjustments to ensure accurate and safe equipment operation. Support pneumatic and hydraulic systems as needed for machine functionality. Provide technical support and training to production staff on basic equipment operation and troubleshooting. Assist with preventive maintenance programs and equipment reliability initiatives. Identify and recommend improvements to equipment, control systems, and plant infrastructure. Maintain maintenance logs, technical notes, and work order documentation. Support spare parts, tools, and maintenance inventory management. Follow all safety procedures, including Lockout/Tagout (LOTO), electrical safety, and OSHA requirements. Respond to equipment breakdowns and production interruptions as needed. Perform soldering and basic electronic repairs when required. Complete other duties as assigned by management. Requirements KEY PERFORMANCE INDICATORS Equipment uptime and reliability. Preventive maintenance completion rate. Mean time to repair (MTTR). Electrical safety compliance. Quality and accuracy of repairs. Downtime reduction. Work order completion and documentation accuracy. Support of continuous improvement initiatives. QUALIFICATIONS Two-year technical degree, trade school certificate, or equivalent education preferred. Two to three years of industrial electrical or maintenance experience, or equivalent combination of education and experience. Strong knowledge of industrial electrical systems, controls, motors, drives, and schematics. Basic understanding of pneumatic and hydraulic systems. Ability to read, write, and interpret technical documents and manuals. Ability to prepare technical reports and maintenance documentation. Strong mathematical and problem-solving skills. Ability to work independently and as part of a team. Strong troubleshooting, analytical, and communication skills. WORKING CONDITIONS Manufacturing and industrial plant environment. Exposure to energized electrical systems, moving machinery, and production equipment. Occasional exposure to wet or humid conditions, elevated surfaces, and confined spaces. Exposure to dust, fumes, and temperature variations. Moderate to high noise levels. PHYSICAL REQUIREMENTS Frequent standing, walking, bending, climbing, kneeling, crouching, and reaching Frequent use of hands for handling tools, wiring, and components Ability to lift up to 50 pounds and frequently lift up to 20 pounds Ability to climb ladders and access elevated work areas Requires close vision, distance vision, depth perception, color vision, and ability to adjust focus Salary Description $25.00

Job Description C.E. Precision Assemblies, a Trexon company, seeks a dedicated Manufacturing Engineer Technician for its Chandler, AZ location. This role offers opportunities for professional growth, and advancement within our dynamic organization. As a Manufacturing Engineer Technician, you will tackle a diverse array of complex and detail orientated tasks and projects that support our staff/company. The successful candidate should possess strong attention to detail, a "Do it Right the First Time" mentality, and the willingness to learn new processes. They will foster a collaborative team environment while demonstrating the ability to assess and enhance existing processes. Weekly Schedule: Full Time, Monday - Friday 6am-2:30pm (overtime as required) Pay: DOE Specific Position Duties: Identify and troubleshoot process, material or equipment problems to minimize down time and recommend solutions to Manufacturing Engineering. Develop, assemble, procure or modify existing and new tooling, fixtures and equipment to ensure efficient production methods. Process customer drawing Engineering Change Notices and initiate/process internal CEPA ECOs accordingly. Complete time studies to quantify processing times and identify areas for process improvements. Assist with hands on training of manufacturing employees on new products, tooling equipment and process revisions. Assist in failure analysis. Troubleshooting, rework/repair of nonconforming product to determine root cause. Promote and support lean manufacturing and continuous improvement activities in Manufacturing. Identify and document Visual Assembly Instructions to help standardize Manufacturing processes for future product builds. Create internal Bill of Materials, Labor Plans and Marking Documents according to customer documentation. Perform Document Control duties in maintaining internal CEPA and customer documentation. Interpret customer drawing requirements/criteria and providing direction/clarification to Manufacturing Technicians, Leads and Supervisor. Minimum Qualifications: 5 years of experience in manufacturing with increasing roles in technical support. Proficient in Microsoft Outlook, and Excel Strong Analytical and problem-solving skills and attention to detail Excellent communication and interpersonal skills, with the ability to collaborate effectively across the department Demonstrated ability to manage multiple priorities and meet deadlines in a fast-paced environment High level of integrity A "Do it Right the First Time" mentality Physical Requirements: Ability to sit and use a computer for extended periods Must be able to effectively use standard office equipment such as computers, printers and telephones Ability to communicate verbally and in writing with team members, other departments, customers and suppliers. Must be authorized to work in the U.S. About C.E. Precision Assemblies: Since its start in 1986, C.E. Precision Assemblies has grown into an award-winning Facility. The products we offer span a wide range of Military and Aerospace applications. We offer products for applications such as: Military Aerospace Satellite components Missile defense Communication Systems And More..... C.E. Precision Assemblies LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Sub-Zero, Wolf, and Cove the leading manufacturer of luxury kitchen appliances is a longstanding, family-owned company based in Wisconsin. This position is in the company's manufacturing facility in Goodyear Arizona. Icons of design and paragons of performance and quality, Sub-Zero, Wolf, and Cove are the refrigeration, cooking, and dishwashing specialists found in world's most luxurious homes. We look for team members who are driven by innovation and excellence, striving to serve our customers by doing what is right-with integrity, teamwork, and accountability. Our Fabrication Business Unit team is integral to the success of manufacturing luxury appliances. Our team is comprised of engineering and operations team members who are focused on continuous improvement, customer satisfaction and delivering high quality products on time. This group relies on the input and suggestions of every member to find success. Growth and development are important aspects of this position. Whether you aspire to be a leader or a technical expert, this position will set you up for success in the future. Primary Responsibilities We are seeking a motivated individual to work as a Manufacturing Engineering Technician on 2nd Shift. The hours for this position are Monday - Friday, 2PM - 10PM. This position has a strong emphasis on Fabrication within our manufacturing environment. This position would be working in a hands-on manufacturing environment where safety, quality and teamwork are of utmost importance. Individuals in this role can expect to share ownership of projects, achieve a high level of job satisfaction and feel like a valued member of the organization. Job responsibilities include, but are not limited to the following: Oversee the process of manufacturing FAI sample parts and support production on Cincinnati CNC press brakes. Provide engineering support for manual TIG welding and manual sanding/finishing processes. Help team members develop an understanding of the equipment, manufacturing process, and quality expectation. Provide guidance to maintenance mechanics when troubleshooting equipment breakdowns. Lead root cause analysis and the implementation of corrective measures Work with design and quality engineering to improve manufacturing drawings and inspection plans as part of new product introductions and continuous improvement projects Ensure safety throughout manufacturing practices, procedures and equipment We value our employees by providing: Competitive compensation based on skills Industry leading health, dental, and vision plans Generous 401 (K) savings and profit sharing Education assistance and internal training programs Electric vehicle charging Maternity & paternity leave Interested in learning more on our robust benefits package we offer? Click here! This position requires a pre-employment drug/alcohol test and background check, which will be administered after a conditional job offer is extended. A negative drug/alcohol test result is required for employment. Refusal to take the test or a positive result may disqualify a candidate from further consideration. All drug testing will be conducted in accordance with federal and state laws.

Sub-Zero, Wolf, and Cove the leading manufacturer of luxury kitchen appliances is a longstanding, family-owned company based in Wisconsin. This position is in the company's manufacturing facility in Goodyear Arizona. Icons of design and paragons of performance and quality, Sub-Zero, Wolf, and Cove are the refrigeration, cooking, and dishwashing specialists found in world's most luxurious homes. We look for team members who are driven by innovation and excellence, striving to serve our customers by doing what is right-with integrity, teamwork, and accountability. Our Fabrication Business Unit team is integral to the success of manufacturing luxury appliances. Our team is comprised of engineering and operations team members who are focused on continuous improvement, customer satisfaction and delivering high quality products on time. This group relies on the input and suggestions of every member to find success. Growth and development are important aspects of this position. Whether you aspire to be a leader or a technical expert, this position will set you up for success in the future. Primary Responsibilities We are seeking a motivated individual to work as a Manufacturing Engineering Technician on 2nd Shift. The hours for this position are Monday - Friday, 2PM - 10PM. This position has a strong emphasis on Fabrication within our manufacturing environment. This position would be working in a hands-on manufacturing environment where safety, quality and teamwork are of utmost importance. Individuals in this role can expect to share ownership of projects, achieve a high level of job satisfaction and feel like a valued member of the organization. Job responsibilities include, but are not limited to the following: * Oversee the process of manufacturing FAI sample parts and support production on Cincinnati CNC press brakes. * Provide engineering support for manual TIG welding and manual sanding/finishing processes. Help team members develop an understanding of the equipment, manufacturing process, and quality expectation. * Provide guidance to maintenance mechanics when troubleshooting equipment breakdowns. Lead root cause analysis and the implementation of corrective measures * Work with design and quality engineering to improve manufacturing drawings and inspection plans as part of new product introductions and continuous improvement projects * Ensure safety throughout manufacturing practices, procedures and equipment We value our employees by providing: * Competitive compensation based on skills * Industry leading health, dental, and vision plans * Generous 401 (K) savings and profit sharing * Education assistance and internal training programs * Electric vehicle charging * Maternity & paternity leave * Interested in learning more on our robust benefits package we offer? Click here! This position requires a pre-employment drug/alcohol test and background check, which will be administered after a conditional job offer is extended. A negative drug/alcohol test result is required for employment. Refusal to take the test or a positive result may disqualify a candidate from further consideration. All drug testing will be conducted in accordance with federal and state laws.

Work Schedule: Tuesday to Saturday, 1:00 PM to 9:30 PM. A shift differential will be provided. This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: * Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment * Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures * Dismantle machines and equipment to gain access to problem areas * Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures * Inspect and measure parts to detect wear, misalignment, or other problems * Remove and/or replace worn or defective parts * Other duties as assigned. Qualifications: * High School Diploma or GED preferred * 1+ years of commercial or industrial maintenance experience or experience in a related field * Experience with low and high voltage electrical systems * Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs * Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. * Must be able to frequently reach up to 31-77 inches. Physical Demands: * Regularly lift and/or move up to 25 pounds * Frequently lift and/or move up to 50 pounds * Occasionally lift and/or move up to 100 pounds * Regularly stand; walk; stoop, kneel, crouch, climb, or crawl * Ability to reach and handle objects, tools, or controls Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

C.E. Precision Assemblies, a Trexon company, seeks a dedicated Manufacturing Engineer Technician for its Chandler, AZ location. This role offers opportunities for professional growth, and advancement within our dynamic organization. As a Manufacturing Engineer Technician, you will tackle a diverse array of complex and detail orientated tasks and projects that support our staff/company. The successful candidate should possess strong attention to detail, a “Do it Right the First Time” mentality, and the willingness to learn new processes. They will foster a collaborative team environment while demonstrating the ability to assess and enhance existing processes. Weekly Schedule: Full Time, Monday - Friday 6am-2:30pm (overtime as required) Pay: DOE Specific Position Duties: Identify and troubleshoot process, material or equipment problems to minimize down time and recommend solutions to Manufacturing Engineering. Develop, assemble, procure or modify existing and new tooling, fixtures and equipment to ensure efficient production methods. Process customer drawing Engineering Change Notices and initiate/process internal CEPA ECOs accordingly. Complete time studies to quantify processing times and identify areas for process improvements. Assist with hands on training of manufacturing employees on new products, tooling equipment and process revisions. Assist in failure analysis. Troubleshooting, rework/repair of nonconforming product to determine root cause. Promote and support lean manufacturing and continuous improvement activities in Manufacturing. Identify and document Visual Assembly Instructions to help standardize Manufacturing processes for future product builds. Create internal Bill of Materials, Labor Plans and Marking Documents according to customer documentation. Perform Document Control duties in maintaining internal CEPA and customer documentation. Interpret customer drawing requirements/criteria and providing direction/clarification to Manufacturing Technicians, Leads and Supervisor. Minimum Qualifications: 5 years of experience in manufacturing with increasing roles in technical support. Proficient in Microsoft Outlook, and Excel Strong Analytical and problem-solving skills and attention to detail Excellent communication and interpersonal skills, with the ability to collaborate effectively across the department Demonstrated ability to manage multiple priorities and meet deadlines in a fast-paced environment High level of integrity A “Do it Right the First Time” mentality Physical Requirements: Ability to sit and use a computer for extended periods Must be able to effectively use standard office equipment such as computers, printers and telephones Ability to communicate verbally and in writing with team members, other departments, customers and suppliers. Must be authorized to work in the U.S. About C.E. Precision Assemblies: Since its start in 1986, C.E. Precision Assemblies has grown into an award-winning Facility. The products we offer span a wide range of Military and Aerospace applications. We offer products for applications such as: Military Aerospace Satellite components Missile defense Communication Systems And More..... C.E. Precision Assemblies LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.