Manufacturing technician jobs in San Angelo, TX - 3,490 jobs

National Pump Company, a designer and manufacturer of high-quality pumping solutions used worldwide for municipal, industrial, and agricultural markets, is seeking an experienced pump Assembler for our Lubbock, TX manufacturing operation. The assembler is responsible for assembling, testing, and inspecting pump components and finished pump units according to engineering specifications, quality standards, and safety requirements. This role requires mechanical aptitude, attention to detail, and the ability to follow work instructions in a production environment. Key responsibilities include: Assemble pump components and subassemblies using hand tools, power tools, fixtures, and assembly equipment; Read and follow work instructions, blueprints, drawings, and bills of material; Install mechanical components such as bearings, seals, shafts, impellers, and housings; Verify correct part selection, orientation, and torque specifications during assembly; Perform visual and dimensional inspections to ensure assemblies meet specifications; and Conduct basic functional or pressure testing as required. Ready to take the next step in your career? We offer competitive compensation and a comprehensive benefits package that includes medical, dental, vision, life, and disability insurance; retirement savings; profit sharing; employee stock purchase opportunities; and tuition reimbursement. If you're looking for meaningful work, a supportive team, and the chance to make a real impact, we encourage you to apply and start the conversation-we look forward to learning more about you. Preferred Qualifications High school diploma or equivalent Minimum 1 year of experience as an assembler (pump or heavy industrial manufacturing preferred); and Ability to read blueprints and use precision measuring tools. This role is performed in a manufacturing shop environment and requires frequent standing, walking, bending, and reaching throughout the shift. The position involves lifting and moving materials up to 70-100 lbs, with or without assistance, and requires good manual dexterity and visual acuity for precision work. Employees work around industrial machinery and tools and may be exposed to noise, metal chips, cutting fluids, and other typical manufacturing conditions. The use of required personal protective equipment is mandatory.

Western Extrusions Corporation, based in Carrollton, Texas, is a leading manufacturer of high-quality extruded aluminum products. Our products serve critical industries such as Class 8 trucks, electric vehicles, truck trailers, utility-scale solar power, electrical transmission, and commercial construction. We foster a culture of learning, continuous improvement, and collaboration. Western Extrusions is committed to delivering exceptional service, capabilities, and quality while maintaining a focus on our employees and customers. Role Description This is a full-time, on-site role for a Manufacturing Supervisor on the 2nd shift, based in Carrollton, TX. The Manufacturing Supervisor will be responsible for overseeing production operations, managing workflow, and ensuring adherence to quality control standards for our Anodize Department. The role includes supervising team members, planning production schedules, and maintaining compliance with safety protocols. Additionally, the Manufacturing Supervisor will address operational challenges, promote efficiency, and ensure a productive working environment. Qualifications Strong Supervisory Skills, including team management and leadership abilities Experience with Production Planning and Manufacturing Operations Proficiency in implementing and maintaining Quality Control standards Effective Communication skills to collaborate with team members and cross-functional departments Problem-solving skills and a focus on continuous improvement Ability to work flexible hours for 2nd shift operations Knowledge of safety regulations and manufacturing best practices Knowledge of Quality Controls Standards Ability to lead a team of 40 employees

Trident Consulting is seeking a " Packaging Operator / Packaging Technician" for one of our clients. A global leader in business and technology services. Job Title: Packaging Operator / Packaging Technician Work Schedule: Monday-Friday, 8:00 AM - 5:00 PM Duration: Short-term project Positions Open: 3 Pay Rate: $22/hour on w2 (flexible by $1-$2 for the right candidate) Interview Process: • 1st Round: Virtual • 2nd Round: Onsite Job Summary The Packaging Technician is responsible for the labeling, relabeling, and packaging of reference standard solutions and neat material aliquots to support MilliporeSigma catalog and custom products. This role ensures finished goods are produced accurately, on time, and in full compliance with quality, safety, and housekeeping standards. Key Responsibilities • Perform labeling, relabeling, and packaging of MilliporeSigma finished goods • Execute packaging and labeling projects according to documented procedures and batch records • Initiate, complete, and review batch records and forms to ensure accuracy and completeness • Ensure all work meets customer requirements, production goals, and project timelines • Communicate delays, issues, or deviations in a timely manner • Maintain compliance with MilliporeSigma Quality, Safety, and Good Manufacturing Practices (GMP) • Follow proper housekeeping, PPE, and safety protocols when handling chemicals Required Qualifications • High School Diploma (required) • Associate's Degree (preferred) • Experience in the Life Sciences, pharmaceutical, chemical, or regulated manufacturing environment • Strong attention to detail and documentation accuracy • Ability to work independently and as part of a team Work Environment & Physical Requirements • Exposure to chemicals requiring Personal Protective Equipment (PPE) • Standard physical exam required • No heavy lifting over 20 lbs • No forklift operation required • No exposure to human blood, biological agents, or animal handling Additional Information • Timesheets: Time in / Time out (Weekly) • Hours: 40 hours/week • Start Day: Monday About Trident: Trident Consulting is a premier IT staffing firm providing high-impact workforce solutions to Fortune 500 and mid-market clients. Since 2005, we've specialized in sourcing elite technology and engineering talent for contract, direct hire, and managed services roles. Our expertise spans cloud, AI/ML, cybersecurity, and data analytics, supported by a 3M+ candidate database and a 78% fill ratio. With a highly engaged leadership team and a reputation for delivering hard-to-fill, niche talent, we help organizations build agile, high-performing teams that drive innovation and business success. Some of our recent awards include: Trailblazer Women Award 2025 by Consulate General of India in San Francisco Ranked as the #1 Women Owned Business Enterprise in the large category by ITServe. Received the TechServe Excellence award. Consistently ranked in the Inc. 5000 list of fastest-growing private companies in America Recognized in the SF Business Times as one of the Largest Bay Area BIPOC/Minority-Owned Businesses in 2022.

Global Industry Leader - Talent Data Solutions - Industrial and Manufacturing This is a hybrid role with the flexibility to work both virtually and from one of our US Aon offices. Aon is in the business of better decisions At Aon, we shape decisions for the better to protect and enrich the lives of people around the world. As an organization, we are united through trust as one inclusive team and we are passionate about helping our colleagues and clients succeed. What the day will look like The Global Industry Leader for the Industrial and Manufacturing sector is responsible for developing and delivering a strategic growth plan for the industry vertical. They build strong client relationships and lead business development initiatives. This role will be responsible for driving the successful implementation of the industry strategy across all client segments and regions, partnering with colleagues across business lines to harness broader Aon relationships to drive growth. Develop and Implement Industry Growth Strategy: Define and implement a strategic plan to expand market share within the vertical, including identifying market opportunities and setting clear objectives. Build and Maintain Client Relationships: Cultivate strong, trusted relationships with key client partners, understanding their business challenges and proactively identifying ways the firm can add new value. Lead Business Development Efforts: Drive regional pipeline generation and conversion by identifying and prioritizing new opportunities and supporting regional sales teams on large enterprise deals. Deliver Thought Leadership: Represent the firm as an industry expert by publishing insights, speaking publicly at conferences, and participating in industry forums to raise Aon's profile and credibility. Lead Financial Performance: Oversee the vertical's financial health, including revenue targets, budgeting, forecasting, and resource allocation. Develop and Grow Industry-Focused Teams: Mentor, and develop talent with relevant industry expertise, fostering a collaborative and impactful team culture. Collaborate Across the Organization: Work closely with other vertical leaders, service line leads, and regional leaders to harness broader firm capabilities and client relationships. Monitor Industry Trends and Regulatory Changes: Stay abreast of industry developments, regulatory shifts, and emerging risks to ensure the firm's offerings remain relevant and compliant. Drive Innovation and Solution Development: Identify client needs and market gaps, leading the development of new services, solutions, and delivery models tailored to the vertical. Lead Collaborator Communication: Provide regular updates to executive leadership and other interested parties on vertical performance, critical initiatives, and key challenges. How this opportunity is different As a thought leader and industry expert, you will represent the firm in the market, track industry trends, and drive the creation of innovative, industry relevant and client-focused solutions. This is a pivotal leadership position for a committed professional with deep industry and reward expertise and a passion for delivering value to clients. Skills and experience that will lead to success Ten plus years of experience in compensation. Proven track record in the Industrial and Manufacturing segment leading and driving growth in a complex global environment. Exceptional influential leadership. Deep understanding of Human Capital universe and needs of clients across all segments, with strengths across Rewards and Analytics. Hands-on experience of shaping and executing against a client-focused vision. Proven track record of building go-to-market strategies and driving sustained results over both a short and long-term horizon. Ability to lead strategic thinking around innovation and ideation with a strong client and commercial lens. Exceptional communication skills to convey compelling messages across all levels and geographies. Ability to work in matrixed environment and lead through influence. Education: Bachelor's degree in relevant discipline or equivalent years of industry experience. How we support our colleagues In addition to our comprehensive benefits package, we encourage an inclusive workforce. Plus, our agile environment allows you to manage your wellbeing and work/life balance, ensuring you can be your best self at Aon. Furthermore, all colleagues enjoy two "Global Wellbeing Days" each year, encouraging you to take time to focus on yourself. We offer a variety of working style solutions for our colleagues as well. Our continuous learning culture inspires and equips you to learn, share and grow, helping you achieve your fullest potential. As a result, at Aon, you are more connected, more relevant, and more valued. Aon values an innovative and inclusive workplace where all colleagues feel empowered to be their authentic selves. Aon is proud to be an equal opportunity workplace. Aon provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, veteran, marital, domestic partner status, or other legally protected status. People with criminal histories are encouraged to apply. We are committed to providing equal employment opportunities and fostering an inclusive workplace. If you require accommodations during the application or interview process, please let us know. You can request accommodations by emailing us at or your recruiter. We will work with you to meet your needs and ensure a fair and equitable experience. For positions in San Francisco and Los Angeles, we will consider for employment qualified applicants with arrest and conviction record in accordance with local Fair Chance ordinances. Aon is not accepting unsolicited resumes from search firms for this position. If you are a search firm, you will not be compensated in any way for your submission of a candidate, even if Aon hires that candidate. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. The salary range for this position (intended for U.S. applicants) is $240,000 to $280,000 annually. The actual salary will vary based on applicant's education, experience, skills, and abilities, as well as internal equity and alignment with market data. The salary may also be adjusted based on applicant's geographic location. This position is eligible to participate in one of Aon's annual incentive plans to receive an annual discretionary bonus in addition to base salary. The amount of any bonus varies and is subject to the terms and conditions of the applicable incentive plan. A summary of all the benefits offered for this position: Aon offers a comprehensive package of benefits for full-time and regular part-time colleagues, including, but not limited to: a 401(k) savings plan with employer contributions; an employee stock purchase plan; consideration for long-term incentive awards at Aon's discretion; medical, dental and vision insurance. This role does not accrue vacation. Rather, this role is eligible to take paid time off at the discretion of the employee and management in accordance with company policy and practices. Various other types of leaves of absence; paid sick leave as provided under state and local paid sick leave laws, short-term disability and optional long-term disability, health savings account, health care and dependent care reimbursement accounts, employee and dependent life insurance and supplemental life and AD&D insurance; optional personal insurance policies, adoption assistance, tuition assistance, commuter benefits, and an employee assistance program that includes free counseling sessions. Eligibility for benefits is governed by the applicable plan documents and policies. #LI-LC1 #LI-Executive #LI-HYBRID 2573297

Introduction Are you passionate about the patient experience? At HCA Healthcare, we are committed to caring for patients with purpose and integrity. We care like family! Jump-start your career as an EP Tech today with Methodist Hospital Texsan. Benefits Methodist Hospital Texsan offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation. Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more. Free counseling services and resources for emotional, physical and financial wellbeing 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service) Employee Stock Purchase Plan with 10% off HCA Healthcare stock Family support through fertility and family building benefits with Progyny and adoption assistance. Referral services for child, elder and pet care, home and auto repair, event planning and more Consumer discounts through Abenity and Consumer Discounts Retirement readiness, rollover assistance services and preferred banking partnerships Education assistance (tuition, student loan, certification support, dependent scholarships) Colleague recognition program Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence) Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Learn more about Employee Benefits Note: Eligibility for benefits may vary by location. Come join our team as an EP Tech. We care for our community! Just last year, HCA Healthcare and our colleagues donated $13.8 million dollars to charitable organizations. Apply Today! Job Summary and Qualifications General Statement of Duties: The EP Lab Technician-Certified will function as an integral part of the Cardiac Cath Lab team by participating, implementing, and assisting in the care of patients in the Electrophysiology Laboratory. Demonstrates technical proficiency during all Electrophysiology procedures while functioning in both roles of Electrophysiology Cardiovascular Scrub Technician and Electrophysiology Recorder. As the Recorder, he/she maintains good communication with the patient care team to ensure proper equipment set up, accurate monitoring, and quality data collection. Minimum Education, Experience, Training, Required Knowledge, Skill, Abilities and Other Job-Related Characteristics: 1. Education: ALL of the following: High School Graduate or G.E.D. New hires as of 06/01/2013 have to have ONE of the following: Two (2) years full-time Invasive Cardiovascular Technology experience An Associate Degree or equivalent college hours (62 semester hours) in health, science, natural science, nursing, engineering, or any primary science or higher. Graduate of an accredited (by CHEA, USDOE, or CMA) program in Invasive Cardiovascular Technology. Graduate of a NON-programmatically accredited program in Invasive Cardiovascular Technology which has a minimum of one (1) year of specialty training and includes a minimum of 800 clinical hours. 2. Experience: None 3. Employee completes initial and ongoing training and competencies as defined by service line, facility and department/unit which are specific to the needs of the patient population served (if applicable). 4. Preferred: One (1) year fulltime or fulltime equivalent in Invasive Cardiovascular Technology preferred. 5. Baccalaureate in health, science, natural science or nursing, engineering or any primary science AND six (6) months of fulltime or fulltime equivalent in Invasive Cardiovascular Technology preferred. Minimum License, Certificates, or Registrations Required: Required: A. New hires must have ONE of the below-listed certifications: B. Current certification eligible Cath Lab Technicians must successfully pass RCIS/RCES exam in 18 months from start date; RCIS (Registered Cardiac Invasive Specialist) from CCI (Cardiovascular Credentialing International) RCES (Registered Cardiac Electrophysiology Specialist) ARRT (American Registry of Radiology Technologists) RRT (Registered Respiratory Therapist) NREMT-Paramedic EMT Essential Job Functions: 1. Demonstrate advance technical proficiency for all Electrophysiology procedures while functioning in Cardiovascular Scrub Technician and Electrophysiology Recorder. This includes but is not limited to the following procedures; Diagnostic Electrophysiology studies Interventional electrophysiology, Ablation Permanent Pacemaker, Implantable cardiac defibrillator, Biventricular Pacemaker and Defibrillator Laser Lead Extraction Vascular Closure devices all of which can occur on an Elective or Emergent basis. 2. Demonstrate advance knowledge to identify cardiac structures, advanced anatomy of all heart chambers coronary vasculature, the physiology behind the dysrhythmias disease processes and assist the physician in either obtaining or entering data into the Electrophysiology Physiologic Monitoring System(s) for accurate assessment. Must verify accurate information is gathered during procedure as well as homodynamic data. 3. Practices radiation safety and observes all principles to ALARA which includes advance knowledge of all regulations, requirements set forth by the Texas Bureau of Radiation Control, the Methodist Radiation Safety Committee and the proper use and storage of personal radiation badge. 4. Will accurately report life threatening arrhythmias by demonstrating proficiency in the assessment of Cardiac function, using homodynamic as well as Electrophysiology data. Understands the abnormal physiology or disease process such as; Cardiomyopathy, Myocardial Infarction, Valvular disorders, bypass tracts, WPW and their relationship to the condition. 5. Assures that Angiographic and procedural data is properly archived for long-term storage and assures the presence of all components of procedure information in both hard copy and computerized formats. 6. Is required to assist and train new staff and existing staff members, in the scrub/recorder arena Additional Job Functions: 1. May handle, pick up, deliver, and/or stock non-controlled medications as directed by a licensed team member. 2. Takes "Call" on a rotating basis as assigned. 3. Supports the mission and vision of the Methodist Healthcare System. Understands and is committed to helping the Methodist Healthcare System and its associated facilities achieve its goals. 4. Must learn and comply with System and facility safety policies and rules; must use appropriate safety equipment and procedures at all times; must immediately report all unsafe conditions to supervisors; must be familiar with all safety features of equipment, tools or materials encompassed by job duties; and must check with supervisors (prior to job performance) if there is a question as to the safe procedure to be used for any job function. 5. Adheres to the MHS Code of Conduct and demonstrates ethical behavior as expected by our patients, colleagues and the community. Understands the personal obligation to report any activity that appears to violate applicable laws, rules regulations or the Code of Conduct itself. 6. Completes other duties as assigned. Methodist Hospital Texsan is a 120 bed acute care hospital. We remain one of South Texas's premier heart and orthopedic hospitals. We are certified in chest pain and heart failure with comprehensive cardiac services. Our orthopedic services, including the Joint Replacement Academy and the Center for Spine, hold some of the best clinical results in the industry. We achieve this by using state-of-the-art technology, such as our robotics program. Methodist Hospital Texsan is the first hospital in San Antonio to receive the Joint Commission's Gold Seal of Approval for Chest Pain Certification. We were awarded the Heart Care Center National Distinction of Excellence. This is the highest recognition a hospital can receive. Our ICU was awarded the Silver Beacon Award for Excellence. We are also recognized as a Level IV trauma center. Our 30 bed Inpatient Rehab Unit has received the Rehabilitation Stroke Certification from the Joint Commission. Methodist Hospital Texsan has been deemed one of Modern Healthcare's Best Places to Work in Healthcare for 3 years in a row. We were a recipient of the 2019 Guardian of Excellence Award by Press Ganey. Join our record setting team today! "The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you are looking for an opportunity that provides satisfaction and personal growth . click apply for full job details

Work days/Shift Hours - if applicable: 5:00 AM - 5:00 PM / 2-2-3 schedule. General Purpose The Production Supervisor role is responsible for manufacturing product using efficient and safe manufacturing processes through the supervision of production team members. Must adhere to the schedule and ensure that quality standards are met. Duties and Responsibilities Staff, train, evaluate and develop team members. Manage line efficiencies, key performance indicators and down time. Manage within labor and OPEX budget. Monitors the production process, makes routine process checks and adjusts equipment or work practices according to standard operating procedures. Ensures equipment in the area assigned is in working order and that working conditions are safe at all times. Verify the readiness of the production line at start-up and supervise change overs. Manage overall package and product quality to ensure all standards and specifications. Actively drives Good Manufacturing practices that meet company standards. Utilizes and supports The Coca-Cola Quality system. Complete daily production reports. Maintains and timely post daily track and rank reports. Flex work schedule to meet the business demands. Participation in project work and initiatives as assigned including duties as assigned. Ensure compliance with all Company Safety policies and standards, ensuring proper attire and PPE are worn. Responsible for enforcing all company policies, regulations and holding regular safety meetings to communicate safety awareness and policies. Collaborates with other departments (e.g., Risk Management, Internal Audit, Employee Services, Human Resources, etc.) to direct compliance issues to appropriate existing channels for investigation and resolution. Consults with other functions as needed to resolve difficult issues. Participation in project work and initiatives as assigned. Qualifications A Bachelor's degree preferred with a science related discipline. High School degree or GED required. At least 1 year in supervisory roles of people & processes.Demonstrated ability to lead teams showing improvement in plant KPIs. Working knowledge of the principles of manufacturing management. Working knowledge of specific supply chain capabilities, strategies and interdependencies. Demonstrated ability to collaborate cross-functionally and coordinate efforts around process improvement. Working knowledge of basic elements of Good Manufacturing Practices in a manufacturing environment. Working knowledge of key business drivers used to gauge the effectiveness and performance of an internal group or supplier. ISO (22000, 9000, 14001, etc) or other management system. Lean, Six Sigma, 5S. Working knowledge of food safety. Self-Guided Work Force. Continuous Improvement. Change Management. Leader of leaders. HACCP. Knowledge of PLCs, Ammonia Refrigeration and PMs on manufacturing equipment. Good Manufacturing Practices. Operational Excellence. Lean manufacturing concepts Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights dol.gov Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

The Role Entegris is currently seeking a Facilities Engineering Technician to join our Facilities team. This position will be based in our Burnet, TX. facility. In this role, you will be responsible for maintaining and improving the factory gloveboxes. You will be the point contact for preventative maintenance, modifications and daily health monitoring and adjustments. The ideal candidate will recognize the critical value of ensuring consistent execution of tasks while striving for continuous improvement. Join our team and make a difference! What You'll Do Be responsible for reviewing and improving glovebox maintenance tasks Execute glovebox preventative maintenance and correct issues as they arise. Assist the glovebox engineer with new glovebox installation and FAT Actively assist engineering in leading/participating Root Cause Analysis (RCA) to diagnose existing failures and help document to communicate with internal stake holders. Assist in taking actions to prevent reoccurrence of failures. Communicate effectively with other team members to promote a safe, positive, and productive working environment. Identify opportunities for improvements, waste reduction and increased productivity. Assist Manufacturing Engineering with other tasks as needed. What We Seek High school diploma/GED Required; Associate degree in a technical or mechanical field or comparable work experience preferred; Demonstrated experience (1-3+ years) of increasing responsibilities within a global organization serving the semiconductor industry. Experience handling hazardous chemicals strongly preferred; Semiconductor, manufacturing or operations experience desirable; Strong computer skills using Microsoft Office applications (SAP and PLC experience is a plus); Familiarity with working in ISO 9000/14000 environments; Desire to work in a fast-paced, deadline driven environment; Must be able to lift and/or move up to 50 lbs. and push up to 130lbs. Dependability with flexibility to work over-time as needed to support business needs; Safety focus with ability to wear appropriate PPE as required; Ability to attain respirator certification and wear a cleanroom suit. On time completion of required preventative maintenance tasks; Your dedication and commitment to the team. Your ability to solve problems and help implement corrective actions. Your demonstrated interest in continuing to learn as well as improve processes. Your ability to effectively communicate and work as a member of a team. Your ability to ensure tasks are completed to the highest standards. Why Work at Entegris Lead. Inspire. Innovate. Define Your Future.Not everyone who works for a global company shares the same background,experiences and perspectives. We leverage the differences of our employees tobring new ideas to the table. Every employee throughout the company isencouraged to share input on projects and initiatives. Our decision-makingprocess is truly a collaborative effort as we realize there are leaders at everylevel of the organization. We put our values at the core of how we operate as anorganization - not just when it's convenient, but in a lasting and meaningfulway. We want the time and energy you spend here to have a positive impact onyour life inside and outside of the office. What We Offer Our total rewards package goes above and beyond just a paycheck. Whether you're looking to build your career, improve your health, or protect your wealth, we offer generous benefits to help you achieve your goals. Generous 401(K) plan with an impressive employer match Excellent health, dental and vision insurance packages to fit your needs Flexible work schedule and 11 paid holidays a year Paid time off (PTO) policy that empowers you to take the time you need to recharge Education assistance to support your learning journey Values-driven culture with colleagues that rally around People, Accountability, Creativity and Excellence Entegris does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need Entegris immigration sponsorship (e.g., H1B, TN, STEM OPT, etc.) now or in the future. At Entegris we are committed to providing equal opportunity to all employees and applicants. Our policy is to recruit, hire, train, and reward employees for their individual abilities, achievements, and experience without regard to race, color, religion, sexual orientation, age, national origin, disability, marital or military status.

This role is primarily responsible for performing HMC Change Over level maintenance for production/operations. Perform regular operations preventive maintenance and replace parts that need to be replaced during the changeover process. Contributes to ensuring safe working practices are followed and contributes ideas to simplify and standardize the workplace. Support to troubleshoot malfunction of the HCM equipment to operators as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: Core duties and responsibilities include the following and other duties may be assigned ty the director of production and cooperation with the gels filling production supervisor. Responsible for HMC setup between the time frame established to ensure the equipment is properly set up for the production schedule. Train HMC machine operators on how to be troubleshooting the line when malfunctions occur. Troubleshoots, maintains, supports and assists with repairs to HMC production equipment. Assist with all process improvements projects and production/quality standards, Company KPIs (Key Performance Indicators) to include, but are not limited to safety, quality, cost and housekeeping. Performs preventive maintenance on all minor and major pieces of equipment related to HMC production equipment. Complies with all equipment, safety and OSHA rules and regulations. Maintain inventory of spare parts and consumable parts for equipment. Monitor facilities and manufacturing operating equipment on a daily basis, notify maintenance leadership and direct supervisor the level of spare parts, equipment problems and inefficiencies and recommend possible solutions. Identify existing and potential operational problems and efficiencies. Maintain and organize the documents and procedures related to calibration, preventative maintenance and usage of logbook. Performs related duties as assigned. Follow the Company documents (BOM) when the setup is performed and during the shift, best GMP practices and safety regulations. Perform quality checks to ensure HMC product meet company and customer quality standards e.g. (weights, Seals, code, etc.) Always maintain a safe and clean production area. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must have technical knowledge and mechanical aptitude to perform complex start up, debugging and repairs of packaging machinery. Ability to read and understand technical instructions and reference materials in order to interpret and apply Standard Operating Procedures and Work Instructions; perform practical application of mathematical calculations to solve specific mechanical problems and use many types of equipment. Must communicate effectively in order to interface with multiple internal customers and equipment vendors, contractors and others to meet project requirements. Reading, writing and speaking English clearly and concisely. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. EDUCATION AND/OR EXPERIENCE: 2-3 years as a maintenance mechanic in a manufacturing environment or 2-5 Machine operator in a manufacturing environment. Experience working in a pharmaceutical manufacturing environment preferred. Digital Logic Systems Reading Schematics and Symbols COMPETENCIES: To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops solutions. Quantity - Meets productivity standards; works in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures. Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical and environmental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and /or move anywhere from 10 - 50 pounds; and occasionally more than 100 pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Ready to take your EEG skills on the road? Join SynapseTBI, a fast-growing neurodiagnostics team, and bring life-changing testing to patients across the country. We're looking for a motivated Ambulatory EEG Technologist who loves patient care, enjoys flexibility, and is excited about a career that blends healthcare with travel. Company Description SynapseTBI offers a comprehensive protocol of objective diagnostic testing for the diagnosis of Traumatic Brain Injuries (TBI), Mild Traumatic Brain Injuries (mTBI), and Post Concussion Syndrome. Recommended and validated by the American College of Occupational and Environmental Medicine (ACOEM) for "Post TBI Patients who either have symptoms of cognitive deficits and/or have sustained a TBI sufficient to cause same", our services also include neurologist consultations, recommended treatment plans, psych evaluations, in-home TBI treatment programs including Neurofeedback, and life care plans. Role Description This is a travel role for an ERP/EEG Technician, primarily covering the Midwest Regions, preferably based in the Dallas area. The EEG Technician will be responsible for performing Neurodiagnostic Testing, assisting with epilepsy and neurophysiology studies, ensuring patient care, and working closely with medical professionals to conduct diagnostic tests, assessments and treatments. What You'll Do: ✨ Travel to patient homes, clinics, and partner sites to set up and remove ambulatory EEG studies and/or run ERP testing along with other TBI diagnostic studies ✨ Apply electrodes and ensure clean, accurate data collection ✨ Teach patients and families how the test works and answer their questions with confidence ✨ Keep equipment in top shape and maintain detailed study records ✨ Represent our company with professionalism, compassion, and a patient-first mindset What We're Looking For: ✔️ EEG experience preferred, but not required (we will teach the testing for the right candidate) ✔️ Someone that works well on their own and doesn't require a micro-manager ✔️ Credentialed techs (R. EEG T.) a plus - but not required ✔️ Someone flexible, detail-oriented, and ready to travel ✔️ Strong communication skills and a passion for helping patients ✔️ A valid driver's license and reliable transportation required Why You'll Love It Here: 🌎 Travel nationwide with all lodging and travel expenses covered 💰 Competitive salary + a comprehensive bonus plan 🩺 Full benefits (health, dental, vision, PTO) 📈 Ongoing training and career growth opportunities 💡 Work with a supportive team that values your expertise If you're looking for a career that takes you beyond the walls of a hospital and gives you the chance to explore new places while making a difference in patients' lives-this is it.

We're seeking experienced AXE 10 professionals to support line and trunk migrations, as well as related provisioning tasks, in a live network environment. You'll need a solid grasp of AXE architecture (hardware and software) and be comfortable logging into the switch, navigating it, and executing provisioning activities. While we value strong AXE 10 domain expertise, success in this role also depends on your curiosity, adaptability, and willingness to learn new tools and inventory applications. - Perform line and trunk migrations in a live production network. - Execute AXE 10 provisioning tasks and changes safely and accurately. - Log into AXE switches, navigate system interfaces, and work confidently across the architecture. - Use internal tools/applications to access inventory and pull data; reconcile discrepancies and work through imperfect records. - Follow established methods of work, documentation standards, and change management processes. - Collaborate with senior team members for on-the-job training and knowledge transfer. - Please communicate clearly, take direction, and solve problems through obstacles (e.g., inventory gaps, tool quirks). - Support continuous improvement of processes, tools, and documentation. *Skills* AXE 10, switch engineering, trunking, trunk lines, TDM/PSTN, circuit provisioning, inventory management system, remote access systems, Router, Cisco routers, switches, Telecom inventory systems, Ericsson, ss7, MOP, Legacy switches, TDM switches *Top Skills Details* AXE 10,switch engineering,trunking,trunk lines,TDM/PSTN,circuit provisioning,inventory management system,remote access systems,Router,Cisco routers,switches *Additional Skills & Qualifications* Solid AXE 10 hands-on background (not "light touch"). Provisioning + line/trunk migration experience in production environments. - Curious, adaptable, and coachable; comfortable learning new tools/inventory systems. - Problem-solver who can work through imperfect data without getting blocked. - Professional, collaborative, and aligned to established methods. - Preferred: Ericsson/vendor-side experience. *Experience Level* Intermediate Level *Job Type & Location*This is a Contract position based out of Dallas, TX. *Pay and Benefits*The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully remote position. *Application Deadline*This position is anticipated to close on Jan 21, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Do you want to learn a skilled trade in the oil and gas industry? Would you love a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a recession-proof industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.05 with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to pass a comprehensive background check and drug screening Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Technician III (Shop) Sunstate Equipment Co.: Where Safety and People are Core Values! We take care of our People and it shows! $5,000 Retention Bonus Available! Hiring Immediately; PAID WEEKLY! Typical Schedule: Monday - Friday 7AM - 3:30/4PM or 8:30AM - 5PM (Overtime Eligible) Compensation: Starting at $25 - $30+ per hour; Dependent upon Experience + Quarterly Branch Performance Bonus Location: 14901 N Interstate 35 Frontage Rd Buda TX 78610 Exceptional Perks Uniforms Provided AND cleaned for FREE Work Boot Allowance Rent ANY of our equipment for FREE FREE Prescription Safety Glasses Unique Vacation Overtime Averaging benefit that pays you overtime while you're on vacation! Medical, dental, and vision insurance eligibility after first full month of employment. 401 Retirement Plan with up to 6% company match after 90 days. 7 Company paid holidays, 2 half days, + "My Holiday", paid day off annually to observe a holiday of your choice Two weeks of vacation PTO in your first year + sick leave and personal time accrued after 90 days. Eligibility requirements for $5,000 Retention Bonus paid out in equal installments over 24 months every 6 months. Position Details & Requirements Sunstate is a proud Second Chance employer that evaluates every candidate on a case-by-case basis. You should have 3 or more years of experience as a diesel mechanic, with a construction equipment background. Extensive experience with hydraulic, electrical, and diesel engines on heavy construction equipment. Experience performing preventative maintenance, troubleshoot/diagnose malfunctions and repair equipment. Must have the necessary tools you need to perform preventative maintenance and equipment repairs. Inspect, service, and test equipment, ensuring performance to manufacturer specifications. Good understanding of reading schematics, computer diagnostic software, and welding methods. Safety oriented, maintaining industry and Sunstate safety standards performing equipment repairs. Be willing and ready to learn; this position comes with growth opportunities! Interested? Apply now! #LI-HJ1 #GULF Why Choose Us? At Sunstate, every employee is valued, respected, and fairly compensated. More importantly, every employee has a voice that deserves to be heard. We are working hard to challenge the typical ways of business and develop an environment where our employees feel safe, comfortable, and look forward to coming to work. No matter which location you visit, you can't help but feel the close-knit work-family environment. We have strategically and organically grown our company from within, promoting from the ground up and providing employees with opportunities to explore their different passions within our own walls. This culture allows our people to develop valuable, marketable skills they can use throughout their career. Plus, with benefits like Baby Bonding, My Holiday vacation time, and discounts on everything from movie tickets to cell phone bills, we're constantly evolving our resources to provide our people with tools to make their lives easier! Be YOU at Sunstate At Sunstate Equipment, we are actively fostering a workplace culture where individuals of all identities and life experiences feel genuinely valued, respected, and appreciated. As a proud equal-opportunity employer, we wholeheartedly welcome candidates from diverse backgrounds and cultures. We recognize and celebrate the unique perspectives they bring, with the understanding that they are the fuel for the innovative ideas that drive the evolution of our industry Sunstate Equipment Co. is an Equal Opportunity Employer A Drug Free Workplace and Participates in E-Verify

←Back to all jobs at FORCE PRESSURE CONTROL LLC Senior Production Technician | Valves FORCE PRESSURE CONTROL LLC is an EEO Employer - M/F/Disability/Protected Veteran Status OFS Facility Operations | Valve & Surface Pressure Control Equipment Force Pressure Control is seeking safety-oriented production personnel to work in Longview facility. Production personnel will be tasked with inspection, rebuild, and maintenance of frac valve and other surface pressure control inventory and associated equipment. Production personnel may, at times, be required to perform field-related tasks including, but not limited to, the rigging up / down of equipment, function testing, pressure testing, component alterations, etc. Working background with valve and other wellhead / surface pressure control equipment is required. The Senior Production Technician position is a full time, non-exempt position. Hourly pay rate commensurate with experience. Total compensation package includes paid time off / paid holiday schedule, health / medical / ancillary benefits, and 401(k) retirement plan sponsorship. Applicants have rights under Federal Employment Laws. Please visit our careers page to see more job opportunities.

Our small Oil & Gas client (TX operator) located in the Las Colinas area is seeking an Engineering Technician with experience in Production and Ops areas. Duties and Requirements include... - Well sketches and well file information - Daily Production - Monthly volume settlements - Input state production reports - Familiarity with Computer data collection software - Have some accounting background Please reach out if you would like to learn more ******************************** **PLEASE share this forward with your Oil & Gas Technician network as well!

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: Supply Chain Manufacturing Job Sub Function: Production Equipment Repair & Maintenance Job Category: Business Enablement/Support All Job Posting Locations: San Angelo, Texas, United States of America Job Description: About MedTech Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at *******************/. We are searching for the best talent for an Instrument Technician (Calibration) to be in San Angelo, TX. This position is under a Collective Bargaining Agreement in a union environment and the hourly rate is $27.65/hr Job Summary The Instrument Technician are accountable to utilize trade knowledge and familiarity with plant and equipment for leading a continuous improvement program on specified equipment. This will include recommending, and participating in equipment improvements and PM process improvements. Independently recognize and solve problems with the ability to make critical decisions under pressure on breakdowns and works towards effectively managing deadlines in completing breakdown, maintenance and project activities. DUTIES & RESPONSIBILITIES Under limited supervision and according to prescribed procedures, responsible for operating machinery to produce and repair parts, tools and equipment using sketches, prints or instructions manuals. Duties & Responsibility include: Must understand and demonstrate comprehension of the following but not limited to: English language Process specifications Computer functions as required Read, interpret and follow work instructions and training materials. Pass and maintain training and certification examinations as required. Assess and input data into departmental/ plant information systems. Behavioral Abilities: Strong Interpersonal Skills: Ability to work and communicate well with others Ability to give and understand instructions, both verbal and written. Must be willing to work as a member of a team. Must be willing to accept change and additional responsibilities and training associated with change. LEVEL C-2 Cognitive Abilities: Maintains inventory of spare parts and notifies facilitator when parts are needed. Able to make critical decisions under pressure. Document all equipment service activities and modifications in the Equipment Maintenance Logbook. Works towards effectively managing deadlines in completing projects as well as breakdown maintenance activities. Maintains calibration records in a neat and orderly manner. Mechanical Abilities: Possesses a good understanding of instruments and instrument systems and is capable of diagnosing problems, making necessary repairs or re-calibration as required. Is capable performing emergency repairs, routine and scheduled calibration or maintenance on instruments, components and complete instrumented systems. Can performs instrument maintenance, repairs and calibration using such equipment as oscilloscope, thermocouple simulators, electronic volt meter, ohm meter, current tester, decade resistance boxes, weights, gauge blocks, gauge wires, humidity, hand and power tools and other equipment used in the instrument mechanic trade, etc. Works from drawings, sketches, diagrams, tables, specifications and handbooks to install, repair and maintain instruments and instrumented systems. Is capable of connecting and disconnecting electrical connections, pneumatic and hydraulic fittings associated with instruments or components in a control loop. Operates in a neat and orderly manner, maintaining a clean and orderly work area, exercising care of company tools and equipment. LEVEL C-1 All the above plus the following Cognitive Abilities: Makes critical decisions under pressure during breakdowns. Works with engineers and facilitator as assigned to contribute to design changes or fabrication of prototype or experimental equipment. Ability to consistently manage a variety of tasks, some being very time consuming while under pressure of the manufacturing process. Identify creative solutions while conforming to specifications and safety requirements. Mechanical Abilities: Understands production machinery and equipment in order to effectively diagnose, calibrate or repair complex problems. Re-builds modifies, and contributes to design changes of recording or controlling instruments or automatic devices. Perform highly specialized troubleshooting and repair work with little or minimal direction. Support engineering group in developing System Design Specifications (SDS) and Control System Validation (CSV) documentation and conducting equipment process control software qualification per written protocol. Train lower classed instrument mechanics in their growth and development process. OTHER RESPONSIBILITIES Ensures departmental practices, work areas, and equipment is kept in a safe and orderly fashion. Comply with all applicable quality management system, environmental, safety and occupational health policies. (for example, ISO 13485, ISO14001 & OSHAS18001). Qualifications: High School graduate, G.E.D. or equivalent skills, experience or training. Minimum of two years of technical school, military training or equivalent OJT (on the job training) in an instrument related field Standard testing techniques and practices for instrument testing and calibration of equipment. Knowledge of instrument related diagrams, tables and specifications, etc. Does any other work of a related nature and performs other work -related duties as assigned. Follow current compliance regulations and standards. Must have good work habits (neatness, organizational skills, time management skills, etc.). Basic computer and database management skills. Interface with appropriate manufacturing representatives to ensure manufacturing operations and projects receive effective technical support. Be able to transfer knowledge through good written and verbal skills. Self-motivated and capable of taking a lead position in completing duties. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, external applicants please contact us via *******************/contact-us/careers. Internal employees contact AskGS to be directed to your accommodation resource. Required Skills: Preferred Skills:

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* **Job Function:** Supply Chain Manufacturing **Job Sub** **Function:** Production Equipment Repair & Maintenance **Job Category:** Business Enablement/Support **All Job Posting Locations:** San Angelo, Texas, United States of America **Job Description:** **About MedTech** Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at *******************/ . We are searching for the best talent for an **Instrument Technician (Calibration)** to be in **San Angelo, TX.** This position is under a Collective Bargaining Agreement in a union environment and the hourly rate is **$27.65/hr** **Job Summary** The Instrument Technician are accountable to utilize trade knowledge and familiarity with plant and equipment for leading a continuous improvement program on specified equipment. This will include recommending, and participating in equipment improvements and PM process improvements. Independently recognize and solve problems with the ability to make critical decisions under pressure on breakdowns and works towards effectively managing deadlines in completing breakdown, maintenance and project activities. **DUTIES & RESPONSIBILITIES** Under limited supervision and according to prescribed procedures, responsible for operating machinery to produce and repair parts, tools and equipment using sketches, prints or instructions manuals. Duties & Responsibility include: + Must understand and demonstrate comprehension of the following but not limited to: + English language + Process specifications + Computer functions as required + Read, interpret and follow work instructions and training materials. + Pass and maintain training and certification examinations as required. + Assess and input data into departmental/ plant information systems. + **Behavioral Abilities:** + Strong Interpersonal Skills: + Ability to work and communicate well with others + Ability to give and understand instructions, both verbal and written. + Must be willing to work as a member of a team. + Must be willing to accept change and additional responsibilities and training associated with change. **LEVEL C-2** + **Cognitive Abilities:** + Maintains inventory of spare parts and notifies facilitator when parts are needed. + Able to make critical decisions under pressure. + Document all equipment service activities and modifications in the Equipment Maintenance Logbook. + Works towards effectively managing deadlines in completing projects as well as breakdown maintenance activities. + Maintains calibration records in a neat and orderly manner. + **Mechanical Abilities:** + Possesses a good understanding of instruments and instrument systems and is capable of diagnosing problems, making necessary repairs or re-calibration as required. + Is capable performing emergency repairs, routine and scheduled calibration or maintenance on instruments, components and complete instrumented systems. + Can performs instrument maintenance, repairs and calibration using such equipment as oscilloscope, thermocouple simulators, electronic volt meter, ohm meter, current tester, decade resistance boxes, weights, gauge blocks, gauge wires, humidity, hand and power tools and other equipment used in the instrument mechanic trade, etc. + Works from drawings, sketches, diagrams, tables, specifications and handbooks to install, repair and maintain instruments and instrumented systems. + Is capable of connecting and disconnecting electrical connections, pneumatic and hydraulic fittings associated with instruments or components in a control loop. + Operates in a neat and orderly manner, maintaining a clean and orderly work area, exercising care of company tools and equipment. **LEVEL C-1** **All the above plus the following** **Cognitive Abilities:** + Makes critical decisions under pressure during breakdowns. + Works with engineers and facilitator as assigned to contribute to design changes or fabrication of prototype or experimental equipment. + Ability to consistently manage a variety of tasks, some being very time consuming while under pressure of the manufacturing process. + Identify creative solutions while conforming to specifications and safety requirements. + **Mechanical Abilities:** + Understands production machinery and equipment in order to effectively diagnose, calibrate or repair complex problems. + Re-builds modifies, and contributes to design changes of recording or controlling instruments or automatic devices. + Perform highly specialized troubleshooting and repair work with little or minimal direction. + Support engineering group in developing System Design Specifications (SDS) and Control System Validation (CSV) documentation and conducting equipment process control software qualification per written protocol. + Train lower classed instrument mechanics in their growth and development process. **OTHER RESPONSIBILITIES** + Ensures departmental practices, work areas, and equipment is kept in a safe and orderly fashion. + Comply with all applicable quality management system, environmental, safety and occupational health policies. (for example, ISO 13485, ISO14001 & OSHAS18001). **Qualifications:** + High School graduate, G.E.D. or equivalent skills, experience or training. + Minimum of two years of technical school, military training or equivalent OJT (on the job training) in an instrument related field + Standard testing techniques and practices for instrument testing and calibration of equipment. + Knowledge of instrument related diagrams, tables and specifications, etc. + Does any other work of a related nature and performs other work -related duties as assigned. Follow current compliance regulations and standards. + Must have good work habits (neatness, organizational skills, time management skills, etc.). + Basic computer and database management skills. + Interface with appropriate manufacturing representatives to ensure manufacturing operations and projects receive effective technical support. + Be able to transfer knowledge through good written and verbal skills. + Self-motivated and capable of taking a lead position in completing duties. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, external applicants please contact us via *******************/contact-us/careers . Internal employees contact AskGS to be directed to your accommodation resource. **Required Skills:** **Preferred Skills:**

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities * Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. * Assemble equipment per engineered drawings or as instructed by others. * Inspect completed components for accuracy and functionality. * Maintain an orderly work area. * Properly maintain company supplied tooling. * Aid in developing of new procedures and improving existing procedures. * Must understand and comply with all safety rules and company policies of Weatherford. * Work assignments carried out to the highest quality level. * Performs any assembly type functions, using hand or power tools. * May operate both stationary and moving overhead cranes. * Operates any equipment needed to perform job. Experience & Education REQUIRED * 1-2 years prior assembly or manufacturing experience * Mechanical aptitude. * Ability to read blueprints and wiring diagrams PREFERRED * Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED * Good verbal communication skills. * Basic computer skills * Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

Work days/Shift Hours - if applicable: Wednesday - Saturday, 1:00 PM - 11:30 PM Compensation: Starting pay ranges from $32.75 to $41.00 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. General Purpose The role of a Controls Technician is to provide competent and effective electrical and controls support to Plant operations. The ability to perform work safely, meet the needs of Operations, execute the maintenance program and comply with all safety codes such as the National Electrical Code is paramount. The Controls Technician must ensure plant electrical and control systems are installed, maintained and modified in accordance with local, state and national electrical safety codes. The Controls Technical must identify, troubleshoot and repair problems in electrical and controls wiring and programming that occur in production equipment and systems and able to work with voltages up to 600V, three-phase & single-phase A/C circuits, transformers, switchgear, and motor control centers. He/she must be able to run tests, isolate problems, replace faulty sections of wiring, and perform other tasks as necessary. He/she also performs preventive maintenance and upgrades to electronic control systems. Duties and Responsibilities Perform preventive maintenance on electrical and control systems to include disassembly, cleaning, reassembly, and calibration. Understand how to read and translate the information found within building and process blueprints and one-line diagrams to install outlets, circuits, load centers and other forms of electrical equipment. After installing the electrical equipment, test all connections to ensure all components are working properly and safely. Troubleshoot and diagnose electrical and controls issues in industrial equipment and processes using experience, system knowledge and proper instruments appropriate to the voltages and currents encountered. Meet and follow local, state and national electrical codes. Maintain motor control centers (MCC's), switchgear, industrial robots, electronic controllers on mechanized tools, as well as transformers and generators. Communicate with management, engineers, mechanics, and equipment operators to advise them if there are any potential electrical hazards. Install fiber optic cables, coaxial wires and computers in support of plant telecommunications systems. Execute the maintenance work schedule as provided by his/her supervisor. Proper execution of the work schedule will require strategic decisions to ensure the scheduled work will be completed within the period scheduled. Keep the assigned Plant Controls Specialist informed of all issues which may affect the operational capability of the area processes and equipment. Examine jobs to be done and determine scope and best way to accomplish the work. Consult with requester, maintenance planner, and/or supervisor when necessary. Obtain one-lines, drawings, instructional manuals and special procedures, as needed, from files or other sources. Make any additional sketches, diagrams, etc., necessary to clarify the intent of the work order. Ensure the safety needs are given a top priority in operations support and work execution. Some examples are Arc Flash/Shock Hazard safety, confined space entry, LOTO, hazardous materials, hand tool safe use, etc. Update the computerized maintenance management system (CMMS) as necessary to maintain accurate plant asset historical records. Have complete knowledge of plant's processes and packaging systems. Adhere to Good Manufacturing Practices (GMPs) in the execution of the work schedule and operational support. Ensure the shop is maintained in a safe and orderly fashion. Enforce plant polices in the execution of their assigned duties. Protect the integrity and quality of product at all times. Attend meetings and supports continuous improvement initiatives. Recommend equipment to be included in preventive maintenance programs. Suggest improvements to all maintenance processes, including planning scheduling, preventive maintenance, corrective maintenance, CMMS, storeroom operations, etc. Promote the conservation of energy and water. Maintain close contact with assigned maintenance crew, the production supervisor and equipment production operator technicians. Make recommendations for system improvement. Maintain necessary records and files and distributes meaningful and accurate control reports. Recommend additions to storeroom stock. Perform other tasks and special assignments as requested by management. Qualifications Education: High School Diploma or GED; technical mfg. trade, or Associate's Degree preferred. Experience: High School Diploma or GED; technical mfg. trade, or Associate's Degree preferred. Basic industrial math skills, English language reading comprehension and writing 3-5 Years of manufacturing maintenance experience focused on controls and electronics maintenance preferred. Proficiency in controls equipment, i.e. Allen Bradley PLCs, VFDs, HMIs, and Industrial Networks required. Experience with various Human Machine Interfaces Basic Programmable Logic Control (PLC) knowledge required. Must be able to use a computer and associated PLC software programs Able to execute small and medium projects involving controls equipment such as SLC 500, Controls Logix, Panel View Plus and Allen Bradley VFDs Ability to follow manufacturers specifications and schematics. Working knowledge of hand and power tools. Able to read one-line diagrams, blueprints and schematics. Ability to read and interpret a variety of technical data, such as schematics, one-line diagrams, and technical orders relating to the electrical trade. Able to calculate electrical circuit load requirements. Comprehensive knowledge of the operation, capabilities, and limitations of complex electrical power and distribution. Maintenance background, which includes hydraulics, controls, electrical, PLC's, machine tools and pneumatics Skill in troubleshooting electrical problems on large projects and applying test procedures. Skill in the use of hand and power tools of the electrician trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment. Ability to test, calibrate, troubleshoot, overhaul, repair, and install complete electrical systems. May be required to provide own tools Able to lift up to 50 pounds Ability to work on multiple levels, such as catwalks, ladders, etc. and ability to work in extreme temperatures Must have strong problem-solving skills and the ability to work efficiently under stressful situations Must be able to work flexible shift schedules up to 12-hour shifts as determined by business need Perform all tasks in a safe manner to ensure achievement of Quality, Service, Cost,Sustainability, and Safety objectives. Knowledge of safety, environmental, and security regulations, practices, and procedures. Knowledge of regulations, procedures, and policies related to records maintenance and documentation. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights dol.gov Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

Do you want to learn a skilled trade in the oil and gas industry? Would you love a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a recession-proof industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.05 with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to pass a comprehensive background check and drug screening Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.