Manufacturing technician jobs in Union, NY - 50 jobs

**Basic Qualifications:** + High School Diploma or GED equivalency + 5 years inspection experience in a Manufacturing environment + Ability and willingness to use advanced hand tools and measuring devices (i.e. - optical comparators, CMM, programmable and specialized testers) as required. + Ability to perform advanced mathematical calculations (addition, subtraction, etc.), may have to perform metric conversions, conversions to decimals, and use geometry. **Essential Functions & Responsibilities:** + Applies basic judgement and has the ability to propose different solutions. + Uses prior experience and on-the-job training to solve straightforward problems/tasks. Accesses technical and analytic skills required to solve problems. + Daily dispositioning of nonconforming material + Partners cross-functionally with internal resources to arrive at decisions. + Applies established interpersonal skills and leads by example for peers and employees. + Develops understanding of GD&T and advanced measurement principles as applicable. + Identifies and documents non-conforming parts, while using Oracle to maintain inspection records. + Perform job responsibilities according to internal process specifications and third-party requirements. + Assist support functions in root cause analysis; Must be able to multi-task and work within deadlines. + Uses manual and automated measuring / testing equipment to assure product quality. + Cross-trains with employees as needed based upon knowledge and experience. + Compliantly completes all written and/or electronic labor tracking documentation. + Communicates with team to ensure all team members are aware of product deficiencies, new processes, or issues. Provide feedback to appropriate support functions. + Assists leading and supporting team initiatives; participates in Careful Selection process. + Report problems to appropriate resource and/or Coach. + Proactively work to improve efficiency and quality of products. + Participate in and support team initiatives. + Utilize proper PPE, safety equipment, and low safety procedures per position requirements. + Understand and abides by the GE Leadership behaviors. + Other duties as be required **Desired Qualifications:** + 5 - 10 year's inspection experience in a manufacturing environment. + Knowledge of Quality System requirements (AS9100). + Knowledge of electrical components and test methods to include ohm meter, gauss meter, surge test, bipot, etc. + Knowledge of assembly techniques; knowledge of geometric dimensions and tolerances. + Proficiency in understanding special process operations (e.g., brazing, soldering, welding, coating, etc.) as required within the department. + Demonstrates blueprint interpretation, electrical inspection, mechanical inspection, and procedural knowledge. + Inspect all raw materials and purchased parts to determine conformance to design requirement. + Use statistical process control and statistical quality control techniques as required. + Possess Weld and Braze inspection certification; Ability and willingness to pass visual acuity exam. + General knowledge of electrical components and test methods. + Possess knowledge of inspection in multiple areas of the site. + Assembly, solder, or electronics manufacturing experience preferred. + Experience in self-directed team environment; lean manufacturing knowledge. - Strong oral and written communication skills. + Demonstrated ability to analyze and resolve problems. + Humble: respectful, receptive, agile, eager to learn. + Transparent: shares critical information, speaks with candor, contributes constructively. + Focused: quick learner, strategically prioritizes work, committed. + Leadership ability: strong communicator, decision-maker, collaborative. + Problem-solver: analytical-minded, challenged existing processes, critical thinker. **Physical demands:** + Ability to continuously use hands and fingers in repetition. + Ability to occasionally bend, stoop, twist, crouch, squat, climb, and/or balance. + Ability to continuously sit; ability to occasionally lift to 20 lbs.; ability to push/pull up to 22 lbs. *All job descriptions are subject to change. The pay for this position is $27/hour. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close 3/31/26. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable). _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

JOB SUMMARY/OBJECTIVE - The Manufacturing Associate Assembly 2 will be responsible for a wide variety of manufacturing operations on cables and harnesses. Able to train on high level operations based on the needs of the business. To excel in this key role, you must be able communicate clearly. This position's specific duties and responsibilities include, but are not limited to: KNOWLEDGE/SKILLS: Must be able to build cable assemblies of varying difficulty. Teaches people how to build cables assemblies. Skilled usage of most equipment in one or more work areas. Understands processes and procedures and recognizes non-conformance or problems in production processes. Routinely provides training on simple tasks to lower-level Associates. Routinely communicates to leads and senior manufacturing staff with manufacturing issues and concerns. May include other duties as assigned and/or special projects. Must follow and obey all company policies and procedures. Must be a Team player. Must know MS Outlook, Word, Excel, and Intuitive MRP software. May include other duties as assigned and/or special projects. QUALIFICATIONS - EDUCATION/EXPERIENCE: High School or equivalent. 1 year of i3 manufacturing experience or 2 years outside general manufacturing experience. Computer skills and use of computer programs/software specific to the manufacturing process, tracking and traceability of product. May generate routine reports using established computer programs. Requires visual acuity and manual dexterity. Requires oral communication skills. Must be available for overtime work. Must have superior English reading and writing skills. PREFERRED QUALIFICATIONS: 1 year minimum of i3 manufacturing experience. 2 years of outside manufacturing experience with the ability to understand the workflow of the production process from raw material to final customer output. Ability to read manufacturing instructions and interpret manufacturing designs/drawings/diagrams. Can implement changes in processes flows based on verbal or written guidance. PHYSICIAL/ENVIRONMENTS REQUIREMENTS: Requires visual acuity (visual ability to resolve fine detail) and manual dexterity (fine hand and finger movements.) Must be able to stand for periods up to 4 hours. Must be able to lift at least 10lbs frequently; up to 35lbs occasionally, and heavier weights with assistance. Must be able to wear required safety protective equipment including but not limited to safety shoes and glasses. WORK AUTHORIZATION/SECURITY CLEARANCE: No special clearances required. HOURS: FULL-TIME WORK PERKS: This company is proud to offer comprehensive benefits options that includes: Health, Dental, & Vision Insurance Life Insurance PTO & Paid Holiday Long & Short Disability 401K Exceptional growth opportunity MUST BE ABLE TO COMMUTE: Binghamton, NY (Required) WORK LOCATION: In person i3/SureScan is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

Additive Manufacturing Technician (Wednesday-Saturday Shift) Incodema3D Ready to build the future? Incodema3D is seeking a passionate and hands-on Additive Manufacturing Technician to join our innovative team. If you thrive in a collaborative, high-tech environment and are excited by the future of metal 3D printing for aerospace and defense, we want to hear from you. The Role Join a small, dedicated team responsible for the safe and precise operation of our advanced metal 3D printers. This full-time role operates on a four-day work week (Wednesday-Saturday, 2:00 p.m. to 12:30 a.m.) or (Sunday-Wednesday 2:00p.m. to 12:30a.m.), giving you a balanced schedule with maximum impact. What You'll Do Print and produce: Start and monitor critical print jobs, ensuring precision and quality. Material preparation: Handle and verify specialized metal powders. Post-processing: Expertly unload parts, remove powder, and finish products using bandsaws and media blasting. Ensure quality: Execute tasks with a high level of detail and problem-solving to meet our exacting standards. What You Bring Mechanical aptitude and a desire for hands-on, technical work. Strong work ethic and reliability. Excellent communication and organizational skills. A minimum of 1 year of manufacturing or related technical experience. High school diploma or equivalent. The Incodema3D Culture We believe in innovation and the power of our people. Our inspiring work environment empowers you to make a tangible impact on the future of 3D printing. Join a team where your contributions matter. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, military or veteran status, or any other status protected by law. In the event you require special assistance or an accommodation to apply due to a disability, please contact us at **************. Important Note: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. Citizen, lawful permanent resident of the U.S. protected individual as defined by U.S.C 1324b (a)(3), or eligible to obtain the required authorization from the U.S. Department of State.

Job Description Manufacturing Technician is responsible for the semi finished or finished product by using required skills to operate, adjust, clean and set-up equipment in order to maintain quality, safety and regulatory standards for the production and distribution of pharmaceutical products. Must be available for all shifts! ***Please call 607-334-5055 to be considered or visit www.staffworkscny.com and complete an application today*** INDITES

The Manufacturing & Packaging Technician is responsible for the semi-finished or finished product by using required skills to operate, adjust, clean and set-up equipment in order to maintain quality, safety and regulatory standards for the production and distribution of pharmaceutical products. ORGANIZATION STRUCTURE The Manufacturing & Packaging Technician reports to the Operations Line Manager. RESPONSIBILITIES Manufacturing or Packaging Pharmaceutical Technician: Sets-up equipment and tends machines to produce a variety of pharmaceutical products Inspects, weighs and tests ingredients and finished products to ensure accuracy and quality Transports materials, ingredients, compounds, products and supplies into and out of manufacturing modules to facilitate the manufacturing process Loads ingredients into machine for manufacturing process Unloads manufactured product from machines Cleans manufacturing equipment and modules for regular housekeeping and product changeovers Performs data entry to ensure accuracy ESSENTIAL FUNCTIONS Physical ability to perform tasks that may require prolonged standing, sitting, walking, bending, kneeling, squatting, twisting, pushing and pulling. Reach and perform work above the head. Use hands for fine manipulation and repetitive tasks. Climb stairs/ladders/platforms, etc. on equipment for purposes of operating, maintaining and troubleshooting. Lift objects up to 40 pounds without assistance or over 40 pounds with assistance. Manipulate, tip, roll, and place a drum weighing up to 200 pounds onto scales and pallets. Use basic hand tools such as wrenches, screwdrivers, pliers, hammers, and other hand tools as required. Operate high speed equipment. Use basic math skills for batch record calculations & analyze data. Operate a computer to input and access data. Troubleshoot and replace basic equipment components. Meet the requirements of safe operation and personal safety by understanding and properly using required personal protective equipment including PAPR and following safe practices. Give and discern the various visual and audible alarms and signals for equipment startup, evacuation, fires, etc. Read and apply SOP's (Standard Operating Procedures) to daily work to meet cGMP (Good Manufacturing Practices) compliance. The ability to effectively participate in decision making processes incorporating the following skill: Conflict Resolution, Problem Solving, Planning, Effective Communications, Time Management & Priority Setting. Maintain accurate records and data. Read, write legibly, and comprehend high school level material, as well as technical training materials on various operations and systems in the language that is the accepted norm for the site. Know and use the terminology and functions of machines and components. Maintain acceptable attendance. Comply with random drug testing. Work overtime as required as needed. QUALIFICATIONS Full Time Position High School Diploma/GED Trade School Certification or College degree in Mechanical/Technical Discipline - Desired Industrial experience desired in manufacturing or packaging (or in pharmaceutical/food industries) Mechanical aptitude & Logical Thinking Strong literacy Documentation of work Math Skills Ability to work in a team environment Ability to Willing to work across (3) different shifts or extended work hours GMP DECISION-MAKING AUTHORITY The Manufacturing/Packaging Technician must follow and comply with all cGMP process/procedures. An Equal Opportunity Employer, including disability/vets.” “This role will offer a base hourly rate that commensurate with experience and demonstrated skills starting at $18.00 an hour.

Benefits: 401(k) matching Dental insurance Health insurance Paid time off Vision insurance FUNCTION Perform all tasks related to production of custom wire screens and screen products in a safe, efficient, and quality oriented manner. Work is done in a fast paced, team based environment, and includes hand assembly operations and operating machinery to meet exacting quality standards. All work is done in accordance to documented procedures, work standards, industry practices, and the Company employee handbook. POSITION LOCATION Conklin NY Starting Hourly Rate: $18.50/hr. Candidate has opportunity to increase hourly rate after 90 day review period. Based on performance and attendance. SPECIFIC DUTIES/FUNCTIONAL TASKS Use of tape measure, and ability to measure accurately. Perform product specific math, involving adding and subtracting of fractions. Setup and operation of metal shears, punch presses, and press brakes, using Lock out/Tag out procedures, and prescribed forming tooling. Setup and operation of wire straightening and crimping equipment, using Lock out/Tag out procedures, and prescribed forming tooling. Operation of custom manufacturing equipment to perform product line tasks. Documentation of quality inspection and labor records in accordance with procedures Ability to read and comprehend job traveler, with all specific and pertinent details for each production order Recognition and selection of raw materials specific to product lines to meet customer requirements (wire type, diameter, metal gauge) Commitment to meet daily production goals, including reporting of results Maintenance of work area in a clean and orderly manner, relying heavily on 5S practices Active involvement in safety inspections, walk-throughs, and improvement projects May involve fork truck operation, with approval and licensing through internal programs Other duties as assigned to support production and facility goals REQUIRED SKILLS, KNOWLEDGE, AND ABILITY Ability to read a tape measure, and do math with fractions (1/16ths) Ability to work both individually and as a part of a team Must be detail oriented, quality conscious, and willing to make decisions to support the organizations positive quality reputation Ability to learn and retain new tasks and operations Ability to step between various duties in the job description seamlessly OTHER REQUIREMENTS Must have reliable transportation Must comply with all company policies, including drug screening policy Must supply and maintain their own safety shoes. Company provides an annual boot allowance. Must meet position overtime requirements as schedule demands PHYSICAL DEMANDS The work load is planned on an 8-9 hour work day, 5 days per week, in a non-stationary shop environment. Additional work hours may be required each day to meet team production goals. Duties involve standing and walking, and lifting product between 30 and 80 pounds. Product is generally lifted between floor and waist height, and majority of lifting as done as part of a two person team. Tables, lift carts, fork trucks, and cranes are available as needed. PERFORMANCE METRICS Competence and mastery of assigned work areas Performance of overall team in meeting daily goals Production Utilization and efficiency on both an individual and production area basis On time delivery of the production area and facility Quality as measured in both customer returns and internal product scrap rates Attendance and Punctuality COMPENSATION We offer a very attractive starting pay, Paid Sick Leave, Holiday and Vacation . Employer sponsored Health Insurance, AFLAC supplemental Health and Life Insurance. 401K with a generous Safe Harbor Match.

Requisition ID 61538 Position Type (US) Full Time Workplace Arrangement #LI-Onsite About Kerry Kerry is the world's leading taste and nutrition company for the food, beverage and pharmaceutical industries. Every day we partner with customers to create healthier, tastier and more sustainable products that are consumed by billions of people across the world. Our vision is to be our customers' most valued partner, creating a world of sustainable nutrition. A career with Kerry offers you an opportunity to shape the future of food while providing you opportunities to explore and grow in a truly global environment. About the role Our Norwich, NY location is part of our Applied Health and Nutrition Division and one of our specialty sites that creates proteins, lactose, coatings, and flavors. The location lies within Chenango County and is advantageously located within a 50-mile radius of the major cities of Binghamton, Syracuse, Utica, Cooperstown and Oneonta. 158 State Hwy. 320, Norwich, NY 13815 Hourly Rate $21.00/hour + $2.50 Shift Dif $1000 sign on Bonus; pays after 90 days Shift/Working Hours 715PM - 745AM - Working 3 on, 3 off, 2 on, 2 off - you would have every other weekend off. Compensation incentive for cross training! Under the direction of the Production Manager, Department Supervisor and/or Shift Team Leader, the Relief Operator is responsible for operating any piece of equipment in manufacturing according to approved procedures. Key responsibilities ESSENTIAL JOB FUNCTIONS * Individual would need to learn all equipment in manufacturing. * Operator is responsible for operating and helping with all blenders, packaging, batch setting, filtration devices, TRS, HTST's, cooler, evaporators, dryer, and CIP systems. * Individual is responsible for master sanitation in their area. * Perform in-process testing according to approved methods to ensure finished product meets targeted specifications. * Fill out master batch records on time and in a neat, orderly fashion according to GMP's. * Individual shall be able to operate forklift truck in a safe manner and use proper safety measures. * Must be able to lift 55 lbs. * When operating packer must be able to lift 55# at an interval of 1 box every 2 minutes. * Demonstrates leadership in the area of safety. * Individual will be responsible for ensuring all transactions in SAP are accurate. * Demonstrate the ability to multitask and grow into a leader as opportunities are available. Qualifications and skills * Have a good working knowledge of arithmetic and be confident in its use. * Knows multiple jobs in department. * Be neat and consistent in whatever this individual does. * Be able to write clearly and legibly. * Be able to read and understand written instructions from the department supervisor or shift group leader. * Be capable of strict adherence to company policies and yet able to use common sense in making many daily decisions required in this position. * Individual should be capable of adjusting his/her work schedule to the requirements of the department. * REQUIREMENTS * Previous experience in a manufacturing environment * Knowledge of multiple jobs preferred. * Demonstrated ability to multitask. * Leads by influence. Compensation Data The pay rate for this position is $21.00 per hour. Kerry offers a competitive benefits package, including medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, Employee Share Plan, Life, disability, and accident insurance. This job posting is anticipated to expire on 5-2026. Kerry is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age disability, protected veteran status or other characteristics protected by law. Kerry will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditional upon the successful completion of a background investigation and drug screen. Additional information can be found at Know Your Rights Workplace Discrimination is Illegal (dol.gov). Beware of scams online or from individuals claiming to represent us. A Kerry employee will not solicit candidates through a non-Kerry email address or phone number. In addition, Kerry does not currently utilise video chat rooms (e.g., Google Hangouts) to conduct interviews. Refuse any request that asks you to provide payment to participate in the hiring process (e.g., purchasing a "starter kit," investing in training, or something similar). Kerry will not ask you to pay any money at any point in the hiring process with the exception of reimbursable travel expenses. In addition, any payments made by Kerry will be from official firm accounts bearing the Kerry name. Recruiter Posting Type DNI

In partnership with the United States Department of Agriculture (USDA) Natural Resource Conservation Service (NRCS), ELYON International is recruiting Engineering Technicians in New York state. The ELYON Engineering Technician (Civil) will be an integral part of the NRCS Team and provide support for a variety of programs, projects, and special tasks. Work must be completed in accordance with NRCS policies, guides, and the state Field Office Technical Guide (FOTG). The anticipated workload will require working outdoors in the field, in the office, and other business locations and environments. Duties shall include but not be limited to: Assisting agency staff with project planning, documentation and implementation both in the office and in the field. Inventorying and evaluating potential new project sites to support conservation practice systems. Assist and complete required engineering surveys to support future designs and construction project layout. Assisting with development of engineering design calculations, drawings, specifications, cost estimates, asbuilts, etc. Assist and complete construction inspection of construction projects during construction and report findings to the appointed government representative or responsible NRCS employee. Evaluate and assist with evaluating construction materials to verify that they meet or exceed specifications - this shall occur during construction activities but shall also include going to rock quarries to verify required material size requirements and material quality requirements. Develop, maintain, and complete construction project job diaries as required. Communicate daily, or as needed with NRCS employees, the design approver, owner and others on construction projects for progress updates, project coordination, potential problems, substandard construction work, potential needs for contract design, cost, or specification modifications. Keep track of ongoing quantities for construction projects, and make NRCS employees, the design approver, owner and others aware of potential quantity overruns. Assisting with non-inherently governmental and non-sponsor paperwork processing and activities Verify that all construction projects assigned are following the required construction specifications and are following all required permit regulation requirements and keep files that document these activities, including but not limited to manufacturer's material specifications, quality of construction work, equipment breakdowns, substandard materials, OSHA construction safety violations, regulatory permit violations, material testing results, communications with contractors, landowners, agency personnel, material providers, regulatory personnel, local unit of government Sponsors, NRCS employees, the design approver, owner, other appointed Construction Inspectors, various county and district employees, and others Provide documentation that is accurate and complete, this will require the gathering of information, recording of data, establishing and maintaining files, and transmitting the information in the required format to the appropriate personnel. Contractor employee shall have a working knowledge of AutoCAD Civil 3d 2016, or similar technical and agency software, and the capability to be trained on such technical and agency software to improve skills. Actual experience and formal educational training are desirable when available. Contractor employee shall with appropriate guidance develop and complete engineering drawings, modify AutoCAD Civil 3d 2016 drawings to the point of completing many standardized NRCS drawings, modify and develop new drawings when needed. The Contractor employee will interpret these and other construction drawings and 9 specifications, explain these interpretations to contractors, landowners, agency personnel, material providers, regulatory personnel, local unit of government Sponsors, NRCS employees, other Construction Inspectors, and various county, district employees and others. Contractor employee will, after appropriate training and support on agency equipment, be able to independently download survey data, and produce contour maps/drawings when needed. Contractor employee shall be able to analyze data to produce surfaces, profile views and sections views from the surveyed data. Contractor employee will review and provide comments to NRCS staff on construction drawings and specifications developed by NRCS or others when needed to verify technical adequacy and accuracy of the materials and documents in question. Contractor employee will have either a working knowledge of or the willingness and capability to be trained on a variety of surveying equipment. Contractor employee shall use and troubleshoot setup problems for various forms of surveying equipment, self levelling levels, total station equipment, data collectors, GPS total stations, etc. Following initial training on agency specific equipment, the contractor employee shall be able to independently operate such equipment and will train others on its use. The Contractor employee will be expected to independently work with agency specific, TEAMS, SharePoint sites, shared drives and computer systems which may require some initial training. Communicate effectively both verbally and in writing with appropriate contractors, landowners, agency personnel, material providers, regulatory personnel, local unit of government Sponsors, NRCS employees, other Construction Inspectors, various county and district employees and others as needed on all assigned projects. Much of this work will be conducted outside in various weather conditions, and in various environments. Much of the work will be conducted in and around water bodies. The Contactor employee may expect to be working in wet conditions, on construction sites with numerous pieces of heavy equipment, along state, county, and city roads where traffic will be ongoing, in agricultural areas where wildlife and livestock will be commonly present, around Confined Animal Feeding Operations (CAFOs) where livestock waste will be commonly present, and often being stored, and along very steep slopes. Contractor employee will have a working knowledge of OSHA rules and regulations for construction projects, shall follow these rules and regulations, and shall inform others present what the regulations are, and when they are not being followed. Observed violations shall be reported to the appropriate project responsible party, government supervisor or other authorized agency government official. Contractor employee shall be provided all necessary personal protective equipment from the Contractor. Assists with typing, generating, assembling, reviewing, updating, completing, and distributing reports, paper or digital, for inventory, dam assessment, dam inspection, project inspection, quality reviews, progress, and other reports required by any NRCS Program, initiative, database, task order or policy. Assist with maintenance, repairs, and inspections of motor vehicles, as needed. Utilizes a variety of computer hardware and software applications and small office machines, NRCS business tools and locally developed Excel spreadsheets and Access databases to extract information needed to develop reports, maintain schedules, track 10 work progress, and complete assignments. The contractor employee shall demonstrate the use of appropriate language to communicate ideas in words and print based on the audience and situation. Performs duties in a manner supportive of a safe and healthy work environment, and exercises safety precautions when exposed to dangerous objects, chemicals, extreme temperatures, etc. Contractor employee will assist with preparing training materials, facilities, and tools for streamlining planning, design and implementation processes as assigned. 2To perform the duties of the position, in addition to driving a privately owned vehicle (POV), the Contractor employee may be required to travel via a Government Owned Vehicle (GOV) to other locations, as needed. The employee of the Contractor shall be allowed to use a GOV to travel from the office to established work location to established satellite offices as allowed by the availability of GOVs. The Contractor employee must serve as an incidental motor vehicle operator. This involves the operation of a motor vehicle on both public and private roads during daylight hours and occasionally after dark. A valid state driver's license is required Desired Education: Minimum experience shall be 1-year similar job experience. Minimum education shall be a High School degree or equivalent. Desired Skills/Qualification/Experience: Possess and maintain a valid state issued driving license. Functionally proficient and experienced in the use of Adobe Acrobat DC, Distiller or Professional. Functionally proficient and experienced in utilizing a variety of computer hardware and software applications, such as but not limited to Microsoft Windows, Word, Excel, Access, Windows File Explorer, and PowerPoint; Be functionally proficient in saving, editing, deleting, and managing digital files. Knowledgeable and experienced in operating small office machines, such as calculators, fax machines, scanners, and copy machines. Knowledgeable and experienced in general office procedures, such as but not limited to scheduling meetings, preparing reports, creating, and editing spreadsheets, and filing both paper and digital formats. Functionally proficient and experienced in the use of Microsoft Outlook for email and calendars as well as internet browsers such as Microsoft Edge, Google Chrome, Mozilla Firefox, etc. Possess professional and courteous communication skills. Have the ability to function proficiently, professionally, and respectfully in an office environment. Skillful in working and communicating with the general public. Proficient in reading, writing, speaking, communicating, and understanding in English. Physically capable of mobility and accomplishing duties in on-site, field environments. Capable of working independently and be a self-starter. Capable of maintaining professionalism in all situations and environments. Capable of effectively contributing as a member of a team. Possess efficient telephone and email communication skills while being professional, courteous, and respectful. Much of this work will be conducted outside in various weather conditions, and in various environments. Much of the work will be conducted in and around water bodies. You will be expected to work in water, on construction sites with numerous pieces of heavy equipment, along state, county, and city roads where traffic will be ongoing, in agricultural areas where operational equipment, wildlife, and livestock will be commonly present, around Confined Animal Feeding Operations (CAFOs) where livestock waste will be commonly present, and often being stored, and along very steep slopes. In addition to motor vehicles, you will be expected to travel as a passenger in ATV's and UTVs in the various areas of work listed above. After completion of appropriate safety training and upon receipt of operator certification, you will be required to safely operate off road ATV's and UTV's. Benefits: Medical, Dental, Vision, Short Term Disability, Workers Compensation and Life Insurance 11 Paid Federal Holidays 56 Hours of paid Sick Leave per calendar year 80 Hour of Vacation after 1 year of service

The Manufacturing & Packaging Technician is responsible for the semi-finished or finished product by using required skills to operate, adjust, clean and set-up equipment in order to maintain quality, safety and regulatory standards for the production and distribution of pharmaceutical products. ORGANIZATION STRUCTURE The Manufacturing & Packaging Technician reports to the Operations Line Manager. RESPONSIBILITIES Manufacturing or Packaging Pharmaceutical Technician: Sets-up equipment and tends machines to produce a variety of pharmaceutical products Inspects, weighs and tests ingredients and finished products to ensure accuracy and quality Transports materials, ingredients, compounds, products and supplies into and out of manufacturing modules to facilitate the manufacturing process Loads ingredients into machine for manufacturing process Unloads manufactured product from machines Cleans manufacturing equipment and modules for regular housekeeping and product changeovers Performs data entry to ensure accuracy ESSENTIAL FUNCTIONS Physical ability to perform tasks that may require prolonged standing, sitting, walking, bending, kneeling, squatting, twisting, pushing and pulling. Reach and perform work above the head. Use hands for fine manipulation and repetitive tasks. Climb stairs/ladders/platforms, etc. on equipment for purposes of operating, maintaining and troubleshooting. Lift objects up to 40 pounds without assistance or over 40 pounds with assistance. Manipulate, tip, roll, and place a drum weighing up to 200 pounds onto scales and pallets. Use basic hand tools such as wrenches, screwdrivers, pliers, hammers, and other hand tools as required. Operate high speed equipment. Use basic math skills for batch record calculations & analyze data. Operate a computer to input and access data. Troubleshoot and replace basic equipment components. Meet the requirements of safe operation and personal safety by understanding and properly using required personal protective equipment including PAPR and following safe practices. Give and discern the various visual and audible alarms and signals for equipment startup, evacuation, fires, etc. Read and apply SOP's (Standard Operating Procedures) to daily work to meet cGMP (Good Manufacturing Practices) compliance. The ability to effectively participate in decision making processes incorporating the following skill: Conflict Resolution, Problem Solving, Planning, Effective Communications, Time Management & Priority Setting. Maintain accurate records and data. Read, write legibly, and comprehend high school level material, as well as technical training materials on various operations and systems in the language that is the accepted norm for the site. Know and use the terminology and functions of machines and components. Maintain acceptable attendance. Comply with random drug testing. Work overtime as required as needed. QUALIFICATIONS Full Time Position High School Diploma/GED Trade School Certification or College degree in Mechanical/Technical Discipline - Desired Industrial experience desired in manufacturing or packaging (or in pharmaceutical/food industries) Mechanical aptitude & Logical Thinking Strong literacy Documentation of work Math Skills Ability to work in a team environment Ability to Willing to work across (3) different shifts or extended work hours GMP DECISION-MAKING AUTHORITY The Manufacturing/Packaging Technician must follow and comply with all cGMP process/procedures. An Equal Opportunity Employer, including disability/vets.” “This role will offer a base hourly rate that commensurate with experience and demonstrated skills starting at $18.00 an hour.

The Role Amphenol Aerospace Operations is seeking a Customer Quality Technician to work out of its state-of-the-art facility in Sidney, NY. The key responsibilities of this Customer Quality Technician include, but are not limited to: Technical support of customer quality issues/escapes Regular communication with customer via phone, email, and occasional on-site visits Customer quality documentation review through PO's Support of corrective action responses based on customer escape issues and data RMA product review and disposition Maintain a working knowledge of product workmanship standards & quality procedures manual Ability to read and understand technical drawings, specs. , and documents Screening/inspecting product on-site at customer facilities when needed Location Sidney, NY 30 Minute Drive from Binghamton, NY 20 Minute Drive from Oneonta, NY Salary: $50,000 - $65,000 The Person The key skills and qualities of a Customer Quality Technician at Amphenol Aerospace Operations: High school diploma and at least 5 years of applicable experience or an associate degree in a technical curriculum and one year of experience is required Equivalent education and experience are acceptable Microsoft Office and Data3 software Bending, sitting, typing, lifting, standing, driving etc. Daily could be up to a total of 4-5 hours total for any one 10%-25% travel in support of customer quality issues The Company With manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive wage and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol - Making History, Designing the Future

located in Cortland, NY. The Engineer, Network is responsible for the implementation and support of network infrastructure, including LAN, WAN, WLAN and SDWAN to support critical healthcare operations across The Guthrie Clinic (TGC). This role ensures high availability and performance for clinical systems, patient care services, and administrative functions across the hospital network. The Engineer collaborates with IT teams, vendors, and hospital stakeholders to align network solutions with organizational goals and regulatory requirements. This position will be a technology advocate throughout the organization for the effective application of technology to meet business needs and to support business changes and growth. Technology functions include network infrastructure, architecture and protocols (routers, switches, wireless controllers, access points, firewalls, network appliances), network automation and operations, patch management, application delivery, monitoring and cloud computing. Experience: 1. Preferred three to five (3 to 5) years of experience in implementing and managing complex network infrastructure in an enterprise environment; healthcare experience preferred. 2. Highly experienced information systems professional with a strong technical background and proven track record of accomplishments in a large, complex multi-level organization. 3. Experience in network protocols (e.g., TCP/IP, BGP, OSPF, MPLS) and technologies (e.g., Cisco, Extreme, Palo Alto). 4. Proficiency in network security tools (e.g., firewalls, IDS/IPS, NAC). 5. Knowledge of software-defined networking (SDN) and cloud-based network solutions (e.g., AWS, Azure). 6. Knowledge of Azure networking services (e.g., MS Azure VNET, ExpressRoute, vWAN, etc.) 7. Proficient with monitoring and logging tools for access management and troubleshooting using such tools as Syslog, ACS, Netflow, Solarwinds and protocol analyzers. 8. Knowledge of network security and encryption standards. 9. Intermediate troubleshooting skills. 10. Ability to work with network security devices such as Palo Alto, Cisco ASA. 11. Experience with ITSM functionalities such as change control, CMDB and ticketing systems. 12. Strong knowledge of healthcare information systems (e.g., Epic, Cerner), cybersecurity and clinical operations. 13. Prior experience delivering high availability systems in a 24/7 environment across geographically dispersed business units. 14. Demonstrated ability to facilitate evaluation of technologies and achieve consensus on technical standards and solutions among a diverse group of information technology professionals. 15. Demonstrated commitment to customer service who has provided responsive and effective support, developed solid working relationships with customers, and delivered high quality, value-added services that met/exceeded customer expectations. - Equally adept at developing technology strategies and the operation of existing technical infrastructures. Significant experience and knowledge of computing architecture and implementation of networked computing structures. 1. Polished professional with demonstrated information technology experience and strong communication skills that can rapidly gain and maintain credibility with customers and IT colleagues. Education: 1. Bachelor's degree in Information Technology, Computer Science, Healthcare Administration or related field strongly desired or an equivalent combination of education and experience. Licenses/Certifications: 1. Preferred certifications include CCNA Essential Functions: - Responsible for installation and maintenance of network devices. - Monitors functions of network devices to ensure acceptable performance. - Creates and maintains documentation related to network configuration and network topologies. - Serves as subject matter expert across network technologies and solutions supporting LAN, WAN, WLAN and SDWAN. - Troubleshoots and resolves LAN, WAN, WLAN and SDWAN incidents. - Provide level 2 escalation support and troubleshooting to resolve complex network incidents and tasks. - Anticipates and provides solutions for complex problems and issues, recommends upgrades and enhancements. Rapidly absorbs complex technical and conceptual information to identify issues and implications. Able to present understandable alternatives to both technical and non-technical individuals at all levels of the organization. - Monitors industry trends, maintains knowledge of developments in network infrastructure, architecture and protocols, network automation and operations, patch management, application delivery, monitoring and cloud computing. - Maintain current working knowledge of IT best practices and innovative solutions within both healthcare and industry. Identifies leading edge technologies for potential early adoption that will result in service differentiation and create competitive advantage. Collaborates with other TGC IT departments, TGC management and business leaders assisting in the evaluation and validation of emerging technologies. Identifies strategies to mitigate risk associated with leading edge technologies. - Promotes the use of TGC's PMO methodology and standards to manage IT initiatives. - Demonstrates commitment to customer service by providing responsive and effective support, developing solid working relationships with customers and IT colleagues, and delivering high quality, value-added services that exceed customer expectations. - Demonstrates a commitment to excellence in Customer Service with all internal and external customers of TGC. - Willingness to travel between sites in the TGC Pennsylvania/New York regional footprint (Sayre, Towanda, Troy, Corning, Cortland, Binghamton, etc.) - Performs related duties as assigned and unrelated duties as requested. Other Duties: Other duties as assigned Pay Range: Minimum $41.40/hr, Maximum $64.61/hr

Basic Qualifications: * High School Diploma or GED equivalency * 5 years inspection experience in a Manufacturing environment * Ability and willingness to use advanced hand tools and measuring devices (i.e. - optical comparators, CMM, programmable and specialized testers) as required. * Ability to perform advanced mathematical calculations (addition, subtraction, etc.), may have to perform metric conversions, conversions to decimals, and use geometry. Essential Functions & Responsibilities: * Applies basic judgement and has the ability to propose different solutions. * Uses prior experience and on-the-job training to solve straightforward problems/tasks. Accesses technical and analytic skills required to solve problems. * Daily dispositioning of nonconforming material * Partners cross-functionally with internal resources to arrive at decisions. * Applies established interpersonal skills and leads by example for peers and employees. * Develops understanding of GD&T and advanced measurement principles as applicable. * Identifies and documents non-conforming parts, while using Oracle to maintain inspection records. * Perform job responsibilities according to internal process specifications and third-party requirements. * Assist support functions in root cause analysis; Must be able to multi-task and work within deadlines. * Uses manual and automated measuring / testing equipment to assure product quality. * Cross-trains with employees as needed based upon knowledge and experience. * Compliantly completes all written and/or electronic labor tracking documentation. * Communicates with team to ensure all team members are aware of product deficiencies, new processes, or issues. Provide feedback to appropriate support functions. * Assists leading and supporting team initiatives; participates in Careful Selection process. * Report problems to appropriate resource and/or Coach. * Proactively work to improve efficiency and quality of products. * Participate in and support team initiatives. * Utilize proper PPE, safety equipment, and follow safety procedures per position requirements. * Understand and abides by the GE Leadership behaviors. * Other duties as be required Desired Qualifications: * 5 - 10 year's inspection experience in a manufacturing environment. * Knowledge of Quality System requirements (AS9100). * Knowledge of electrical components and test methods to include ohm meter, gauss meter, surge test, bipot, etc. * Knowledge of assembly techniques; knowledge of geometric dimensions and tolerances. * Proficiency in understanding special process operations (e.g., brazing, soldering, welding, coating, etc.) as required within the department. * Demonstrates blueprint interpretation, electrical inspection, mechanical inspection, and procedural knowledge. * Inspect all raw materials and purchased parts to determine conformance to design requirement. * Use statistical process control and statistical quality control techniques as required. * Possess Weld and Braze inspection certification; Ability and willingness to pass visual acuity exam. * General knowledge of electrical components and test methods. * Possess knowledge of inspection in multiple areas of the site. * Assembly, solder, or electronics manufacturing experience preferred. * Experience in self-directed team environment; lean manufacturing knowledge. * Strong oral and written communication skills. * Demonstrated ability to analyze and resolve problems. * Humble: respectful, receptive, agile, eager to learn. * Transparent: shares critical information, speaks with candor, contributes constructively. * Focused: quick learner, strategically prioritizes work, committed. * Leadership ability: strong communicator, decision-maker, collaborative. * Problem-solver: analytical-minded, challenged existing processes, critical thinker. Physical demands: * Ability to continuously use hands and fingers in repetition. * Ability to occasionally bend, stoop, twist, crouch, squat, climb, and/or balance. * Ability to continuously sit; ability to occasionally lift to 20 lbs.; ability to push/pull up to 22 lbs. * All job descriptions are subject to change. The pay for this position is $27/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close 3/31/26. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable). This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

JOB SUMMARY/OBJECTIVE: The Manufacturing Associate Assembly 1 will be responsible for performing basic manufacturing operations in which tasks are well established. To excel in this key role, you must be able communicate clearly. This position's specific duties and responsibilities include, but are not limited to: KNOWLEDGE/SKILLS: Must be able to retain all training. Must have the ability to read and follow written manufacturing instructions. Must have the ability to use basic measuring equipment. Should know what a drawing/blueprint is and will be involved in blueprint reading training. Must have the ability to properly use all assigned hand tools. Will receive training on area specific tools based on assignment. Must follow and obey all company policies and procedures. Will learn how to build cable assemblies or build other items as required. Computer use is mandatory, and skills needed to report your work in the manufacturing software must be learned. Must be a Team player. May include other duties as assigned and/or special projects. QUALIFICATIONS - EDUCATION/EXPERIENCE: Up to one year of manufacturing experience or related experience. High school Diploma or GED. Basic reading, writing and math skills. Must be able to communicate both verbally and in writing. Should have some manufacturing environment experience. Must be able to work 40 hours a week, minimum. Must be able to work overtime as required. PHYSICIAL/ENVIRONMENTS REQUIREMENTS: Requires visual acuity (visual ability to resolve fine detail) and manual dexterity (fine hand and finger movements.) Requires limited supervision for routine processes. Must be available for overtime work. Must be able to stand for periods up to 4 hours. Must be able to lift at least 10lbs frequently; up to 35lbs occasionally, and heavier weights with assistance. Must be able to wear required safety protective equipment including but not limited to safety shoes and glasses. WORK AUTHORIZATION/SECURITY CLEARANCE: No special clearances required. HOURS: FULL-TIME WHAT WE OFFER: 401(k) Health, Dental, & Vision Insurance Life Insurance PTO & Paid Holiday Long & Short Disability Opportunities for career growth and development. A collaborative and dynamic work environment. Recognition and rewards for exceptional performance. MUST BE ABLE TO COMMUTE: Binghamton, NY (Required) WORK LOCATION: In person i3 Assembly LLC is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

Additive Manufacturing Technician (Wednesday-Saturday Shift) Incodema3D Ready to build the future? Incodema3D is seeking a passionate and hands-on Additive Manufacturing Technician to join our innovative team. If you thrive in a collaborative, high-tech environment and are excited by the future of metal 3D printing for aerospace and defense, we want to hear from you. The Role Join a small, dedicated team responsible for the safe and precise operation of our advanced metal 3D printers. This full-time role operates on a four-day work week (Wednesday-Saturday, 2:00 p.m. to 12:30 a.m.) or (Sunday-Wednesday 2:00p.m. to 12:30a.m.), giving you a balanced schedule with maximum impact. What You'll Do Print and produce: Start and monitor critical print jobs, ensuring precision and quality. Material preparation: Handle and verify specialized metal powders. Post-processing: Expertly unload parts, remove powder, and finish products using bandsaws and media blasting. Ensure quality: Execute tasks with a high level of detail and problem-solving to meet our exacting standards. What You Bring Mechanical aptitude and a desire for hands-on, technical work. Strong work ethic and reliability. Excellent communication and organizational skills. A minimum of 1 year of manufacturing or related technical experience. High school diploma or equivalent. The Incodema3D Culture We believe in innovation and the power of our people. Our inspiring work environment empowers you to make a tangible impact on the future of 3D printing. Join a team where your contributions matter. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, military or veteran status, or any other status protected by law. In the event you require special assistance or an accommodation to apply due to a disability, please contact us at **************. Important Note: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. Citizen, lawful permanent resident of the U.S. protected individual as defined by U.S.C 1324b (a)(3), or eligible to obtain the required authorization from the U.S. Department of State.

Job Description Packaging Technicians Must be available to work all shifts! The Packaging Technician is responsible for the semi-finished or finished product by using required skills to operate, adjust, clean and set-up equipment to maintain quality, safety and regulatory standards for the production and distribution of pharmaceutical products. Essential Functions: 1. Promote and adhere to safety requirements. 2. Operate equipment during production run. 3. Adjust materials for proper placement. 4. Start and stop equipment when required. 5. Maintain clean work area. Experience: No previous experience required. Employees will be provided direct supervision and guidance to gain sufficient skill to perform the requirements of the position. ***Please call 607-334-5055 to be considered or visit www.staffworkscny.com and complete an application today*** INDITES

The Manufacturing & Packaging Technician is responsible for the semi-finished or finished product by using required skills to operate, adjust, clean and set-up equipment in order to maintain quality, safety and regulatory standards for the production and distribution of pharmaceutical products. ORGANIZATION STRUCTURE The Manufacturing & Packaging Technician reports to the Operations Line Manager. RESPONSIBILITIES Manufacturing or Packaging Pharmaceutical Technician: Sets-up equipment and tends machines to produce a variety of pharmaceutical products Inspects, weighs and tests ingredients and finished products to ensure accuracy and quality Transports materials, ingredients, compounds, products and supplies into and out of manufacturing modules to facilitate the manufacturing process Loads ingredients into machine for manufacturing process Unloads manufactured product from machines Cleans manufacturing equipment and modules for regular housekeeping and product changeovers Performs data entry to ensure accuracy ESSENTIAL FUNCTIONS Physical ability to perform tasks that may require prolonged standing, sitting, walking, bending, kneeling, squatting, twisting, pushing and pulling. Reach and perform work above the head. Use hands for fine manipulation and repetitive tasks. Climb stairs/ladders/platforms, etc. on equipment for purposes of operating, maintaining and troubleshooting. Lift objects up to 40 pounds without assistance or over 40 pounds with assistance. Manipulate, tip, roll, and place a drum weighing up to 200 pounds onto scales and pallets. Use basic hand tools such as wrenches, screwdrivers, pliers, hammers, and other hand tools as required. Operate high speed equipment. Use basic math skills for batch record calculations & analyze data. Operate a computer to input and access data. Troubleshoot and replace basic equipment components. Meet the requirements of safe operation and personal safety by understanding and properly using required personal protective equipment including PAPR and following safe practices. Give and discern the various visual and audible alarms and signals for equipment startup, evacuation, fires, etc. Read and apply SOP's (Standard Operating Procedures) to daily work to meet cGMP (Good Manufacturing Practices) compliance. The ability to effectively participate in decision making processes incorporating the following skill: Conflict Resolution, Problem Solving, Planning, Effective Communications, Time Management & Priority Setting. Maintain accurate records and data. Read, write legibly, and comprehend high school level material, as well as technical training materials on various operations and systems in the language that is the accepted norm for the site. Know and use the terminology and functions of machines and components. Maintain acceptable attendance. Comply with random drug testing. Work overtime as required as needed. QUALIFICATIONS Full Time Position High School Diploma/GED Trade School Certification or College degree in Mechanical/Technical Discipline - Desired Industrial experience desired in manufacturing or packaging (or in pharmaceutical/food industries) Mechanical aptitude & Logical Thinking Strong literacy Documentation of work Math Skills Ability to work in a team environment Ability to Willing to work across (3) different shifts or extended work hours GMP DECISION-MAKING AUTHORITY The Manufacturing/Packaging Technician must follow and comply with all cGMP process/procedures. An Equal Opportunity Employer, including disability/vets.” “This role will offer a base hourly rate that commensurate with experience and demonstrated skills starting at $18.00 an hour.

The Role Amphenol Aerospace Operations is seeking a Quality Technician to work out of its state-of-the-art facility in Sidney, NY. The key responsibilities of this Quality Technician include, but are not limited to: Technical support of customer quality issues/escapes in relation to RMA's Product review, assist quality engineering with disposition, containment and work orders Support of corrective action responses based on customer escape issues and data Maintain a working knowledge of product workmanship standards & quality procedures manual Determine rework and process work orders Review of rejection trends Location Sidney, NY 30 Minute Drive from Binghamton, NY 20 Minute Drive from Oneonta, NY Salary: $50,000 - $65,000 The Person The key skills and qualities of a Quality Technician at Amphenol Aerospace Operations: High school diploma and at least 5 years of applicable experience OR an associate degree in a technical curriculum and 1 year of experience in manufacturing or manufacturing support environment required Familiarity with quote and order processing preferred Proficiency with Microsoft Office and Data3 software Strong written and verbal communication skills, ability to communicate with customer via phone and email Ability to read and understand technical drawings, specs. , and documents Attention to detail Proactive problem solving skills Bending, sitting, typing, lifting, standing, etc. daily An annual eye exam must be passed with or without corrective lenses The Company With manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive wage and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally. Amphenol - Making History, Designing the Future

located in Sayre, PA. The Senior Engineer, Network is responsible for the implementation and support of network infrastructure, including LAN, WAN, WLAN and SDWAN to support critical healthcare operations across The Guthrie Clinic (TGC). This role ensures high availability and performance for clinical systems, patient care services, and administrative functions across the hospital network. The Sr. Engineer collaborates with IT teams, vendors, and hospital stakeholders to align network solutions with organizational goals and regulatory requirements. This position will be a technology advocate throughout the organization for the effective application of technology to meet business needs and to support business changes and growth. Technology functions include network infrastructure, architecture and protocols (routers, switches, wireless controllers, access points, firewalls, network appliances), network automation and operations, patch management, application delivery, monitoring and cloud computing. Experience: 1. Preferred five to seven (5 to 7) years of experience in implementing and managing complex network infrastructure in an enterprise environment; healthcare experience preferred. 2. Highly experienced information systems professional with a strong technical background and proven track record of accomplishments in a large, complex multi-level organization. 3. Experience in network protocols (e.g., TCP/IP, BGP, OSPF, MPLS) and technologies (e.g., Cisco, Extreme, Palo Alto). 4. Proficiency in network security tools (e.g., firewalls, IDS/IPS, NAC). 5. Experience with software-defined networking (SDN) and cloud-based network solutions (e.g., AWS, Azure). 6. Knowledge of Azure networking services (e.g., MS Azure VNET, ExpressRoute, vWAN, etc.) 7. Proficient with monitoring and logging tools for access management and troubleshooting using such tools as Syslog, ACS, Netflow, Solarwinds and protocol analyzers. 8. Knowledge of network security and encryption standards. 9. Advanced troubleshooting skills. 10. Ability to work with network security devices such as Palo Alto, Cisco ASA. 11. Experience with ITSM functionalities such as change control, CMDB and ticketing systems. 12. Strong knowledge of healthcare information systems (e.g., Epic, Cerner), cybersecurity and clinical operations. 13. Prior experience delivering high availability systems in a 24/7 environment across geographically dispersed business units. 14. Demonstrated ability to facilitate evaluation of technologies and achieve consensus on technical standards and solutions among a diverse group of information technology professionals. 15. Demonstrated commitment to customer service who has provided responsive and effective support, developed solid working relationships with customers, and delivered high quality, value-added services that met/exceeded customer expectations. - Equally adept at developing technology strategies and the operation of existing technical infrastructures. Significant experience and knowledge of computing architecture and implementation of networked computing structures. 1. Polished professional with demonstrated information technology experience and strong communication skills that can rapidly gain and maintain credibility with customers and IT colleagues. Education: 1. Bachelor's degree in Information Technology, Computer Science, Healthcare Administration or related field strongly desired or an equivalent combination of education and experience. Licenses/Certifications: 1. Preferred certifications include CCNP, CCIE, CISSP Essential Functions: - Responsible for installation and maintenance of network devices. - Monitors functions of network devices to ensure acceptable performance. - Creates and maintains documentation related to network configuration and network topologies. - Serves as subject matter expert across network technologies and solutions supporting LAN, WAN, WLAN and SDWAN. - Troubleshoots and resolves LAN, WAN, WLAN and SDWAN incidents. - Collaborate with network architect to design and build functional networks. - Provide level 3 escalation support and troubleshooting to resolve complex network incidents and tasks. - Mentors team members designing and building technical solutions. - Anticipates and provides solutions for complex problems and issues, recommends upgrades and enhancements. Rapidly absorbs complex technical and conceptual information to identify issues and implications. Able to present understandable alternatives to both technical and non-technical individuals at all levels of the organization. - Monitors industry trends, maintains knowledge of developments in network infrastructure, architecture and protocols, network automation and operations, patch management, application delivery, monitoring and cloud computing. - Maintain current working knowledge of IT best practices and innovative solutions within both healthcare and industry. Identifies leading edge technologies for potential early adoption that will result in service differentiation and create competitive advantage. Collaborates with other TGC IT departments, TGC management and business leaders assisting in the evaluation and validation of emerging technologies. Identifies strategies to mitigate risk associated with leading edge technologies. - Promotes the use of TGC's PMO methodology and standards to manage IT initiatives. - Demonstrates commitment to customer service by providing responsive and effective support, developing solid working relationships with customers and IT colleagues, and delivering high quality, value-added services that exceed customer expectations. - Demonstrates a commitment to excellence in Customer Service with all internal and external customers of TGC. - Willingness to travel between sites in the TGC Pennsylvania/New York regional footprint (Sayre, Towanda, Troy, Corning, Cortland, Binghamton, etc.) - Performs related duties as assigned and unrelated duties as requested. Other Duties: Other duties as assigned

Basic Qualifications: * High School Diploma or GED equivalency * 5 years inspection experience in a Manufacturing environment * Ability and willingness to use advanced hand tools and measuring devices (i.e. - optical comparators, CMM, programmable and specialized testers) as required. * Ability to perform advanced mathematical calculations (addition, subtraction, etc.), may have to perform metric conversions, conversions to decimals, and use geometry. Essential Functions & Responsibilities: * Applies basic judgement and has the ability to propose different solutions. * Uses prior experience and on-the-job training to solve straightforward problems/tasks. Accesses technical and analytic skills required to solve problems. * Daily dispositioning of nonconforming material * Partners cross-functionally with internal resources to arrive at decisions. * Applies established interpersonal skills and leads by example for peers and employees. * Develops understanding of GD&T and advanced measurement principles as applicable. * Identifies and documents non-conforming parts, while using Oracle to maintain inspection records. * Perform job responsibilities according to internal process specifications and third-party requirements. * Assist support functions in root cause analysis; Must be able to multi-task and work within deadlines. * Uses manual and automated measuring / testing equipment to assure product quality. * Cross-trains with employees as needed based upon knowledge and experience. * Compliantly completes all written and/or electronic labor tracking documentation. * Communicates with team to ensure all team members are aware of product deficiencies, new processes, or issues. Provide feedback to appropriate support functions. * Assists leading and supporting team initiatives; participates in Careful Selection process. * Report problems to appropriate resource and/or Coach. * Proactively work to improve efficiency and quality of products. * Participate in and support team initiatives. * Utilize proper PPE, safety equipment, and low safety procedures per position requirements. * Understand and abides by the GE Leadership behaviors. * Other duties as be required Desired Qualifications: * 5 - 10 year's inspection experience in a manufacturing environment. * Knowledge of Quality System requirements (AS9100). * Knowledge of electrical components and test methods to include ohm meter, gauss meter, surge test, bipot, etc. * Knowledge of assembly techniques; knowledge of geometric dimensions and tolerances. * Proficiency in understanding special process operations (e.g., brazing, soldering, welding, coating, etc.) as required within the department. * Demonstrates blueprint interpretation, electrical inspection, mechanical inspection, and procedural knowledge. * Inspect all raw materials and purchased parts to determine conformance to design requirement. * Use statistical process control and statistical quality control techniques as required. * Possess Weld and Braze inspection certification; Ability and willingness to pass visual acuity exam. * General knowledge of electrical components and test methods. * Possess knowledge of inspection in multiple areas of the site. * Assembly, solder, or electronics manufacturing experience preferred. * Experience in self-directed team environment; lean manufacturing knowledge. • Strong oral and written communication skills. * Demonstrated ability to analyze and resolve problems. * Humble: respectful, receptive, agile, eager to learn. * Transparent: shares critical information, speaks with candor, contributes constructively. * Focused: quick learner, strategically prioritizes work, committed. * Leadership ability: strong communicator, decision-maker, collaborative. * Problem-solver: analytical-minded, challenged existing processes, critical thinker. Physical demands: * Ability to continuously use hands and fingers in repetition. * Ability to occasionally bend, stoop, twist, crouch, squat, climb, and/or balance. * Ability to continuously sit; ability to occasionally lift to 20 lbs.; ability to push/pull up to 22 lbs. * All job descriptions are subject to change. The pay for this position is $27/hour. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close 3/31/26. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable). This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No