Assembler jobs at Manufacturing Technology - 361 jobs

Responsible for core assembly of heat exchangers within the production environment. Supervisory Responsibilities: * None Duties and Responsibilities: Assembly of cores for heat exchangers Operate equipment and tools to stretch, compress, size and cut FIN material Conduct general deburring of parts to meet quality standards Utilize basic hand tools and general mechanical tools effectively Required Skills and Abilities: Demonstrate mechanical aptitude Must be able to read and interpret engineering blueprints. Strong adherence to safety protocols and operational directions communicated in English Ability to work overtime based on the business needs which may include weekends. Education and Experience: High School diploma, Trade School Diploma, or GED required Manufacturing/Production background preferred, not required. Ability to read, write, and converse in English. Physical Requirements: Ability to lift up to 50 lbs. with or without accommodations. Ability to walk, stand, stoop, and bend 80% of the time during a shift Ability to work in a production environment with constant standing and movement Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Posting Start Date 01-15-2026 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary Principle Accountabilities: Reads work orders, follows production drawings and sample assemblies. Positions and aligns parts in specified relationship to each other in jig, fixture or other holding devices. Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits or performs similar operations to join or secure parts in place. Mounts assembled components to boards or units. May install multi-level subassemblies and modules into Racks using complex configurations. Installs finished assemblies or subassemblies in cases and cabinets. Assembles and attaches hardware, such as caps, clamps, knobs and switches, to assemblies. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating and color-coding parts and assemblies. Tends machines that press, shape or wind component parts. Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards. Sets up station with the correct documents and components per assembly drawing. Handles/install polarized/non-polarized components on designated location on product. Adjusts or trims materials from components to achieve specified electrical requirements or dimensional characteristics. Assist in performing repair work. Communicates any process problems with peers, leads, supervisors and/or engineers. Perform preventative maintenance on production line machinery. SPECIALIZED JOB RESPONSIBILITIES may be required for certain positions. These could include one or more of the following duties: Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals and contact points. Will complete light physical tasks such as changing conveyor width, loading boards on pallets Performs solder masking, taping non-solderable area, installing e-prom into the sockets and placing Rev labels on the boards per production's documents. Inspects nonconforming solder join defects on PTH and SMT chips component. Collects data using the SPC charts. Fills out returned forms of conforming and nonconforming materials and prepares set up kits for incoming shift. Completes basic touch up, removal and placement, inspecting own work and the work of others following applicable work instructions and quality procedures. Detects nonconforming defects and their defect codes to enter into shop floor control systems. Assists, instructs and qualifies new operators. Reports deviations from standard procedures to engineering or supervisor and provides inputs on quality improvements. Systems - Assemble complex units for wiring, connecting difference sub-assemblies and nodes into large rack systems. Education / Experience Completion of a high school degree or equivalent is preferred. Typically requires 1 year of electronic assembly or related experience. Knowledge / Skills / Abilities Basic mechanical skills. Demonstrates basic manufacturing line knowledge and participates in process. Manual dexterity required for operating machinery and computers. Good attention to detail. Excellent eye-hand coordination required. Requires understanding of and ability to use a wide variety of tools. Basic computer skills. Must be able to use a microscope. Ability to read and comprehend simple instructions. Ability to effectively present information in one-on-one and small group situations to other employees, leads and supervisors of the organization. Scope / Impact Low impact, limited to the specific work area. Decision Making / Discretion Limited expectations to make decisions outside immediate work assignments. Decisions only affect individual tasks. Supervision / Leadership Able to understand and receive work instructions from line lead, supervisor/manager and manufacturing support. Receives detailed verbal and written general instructions on new assignments. Requires close supervision. Work Environment: While performing the duties of this job, the employee is regularly exposed to work that requires repetitive motion. Employee may be occasionally exposed to toxic or caustic chemicals. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Have the ability, visual acuity and manual aptitude to recognize and accurately assemble/install components according to manufacturing documentation. While performing the duties of this job, the employee is regularly required to sit, handle small components, and reach with hands and arms. The employee may be required to use a microscope for long periods of time. The employee frequently is required to talk and hear. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 20 pounds. Systems employees may lift up to 50 pounds and push 200 pound racks. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Job Posting Start Date 01-20-2026 Job Posting End Date 02-09-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary Principle Accountabilities: Reads work orders, follows production drawings and sample assemblies. Positions and aligns parts in specified relationship to each other in jig, fixture or other holding devices. Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits or performs similar operations to join or secure parts in place. Mounts assembled components to boards or units. May install multi-level subassemblies and modules into Racks using complex configurations. Installs finished assemblies or subassemblies in cases and cabinets. Assembles and attaches hardware, such as caps, clamps, knobs and switches, to assemblies. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating and color-coding parts and assemblies. Tends machines that press, shape or wind component parts. Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards. Sets up station with the correct documents and components per assembly drawing. Handles/install polarized/non-polarized components on designated location on product. Adjusts or trims materials from components to achieve specified electrical requirements or dimensional characteristics. Assist in performing repair work. Communicates any process problems with peers, leads, supervisors and/or engineers. Perform preventative maintenance on production line machinery. SPECIALIZED JOB RESPONSIBILITIES may be required for certain positions. These could include one or more of the following duties: Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals and contact points. Will complete light physical tasks such as changing conveyor width, loading boards on pallets Performs solder masking, taping non-solderable area, installing e-prom into the sockets and placing Rev labels on the boards per production's documents. Inspects nonconforming solder join defects on PTH and SMT chips component. Collects data using the SPC charts. Fills out returned forms of conforming and nonconforming materials and prepares set up kits for incoming shift. Completes basic touch up, removal and placement, inspecting own work and the work of others following applicable work instructions and quality procedures. Detects nonconforming defects and their defect codes to enter into shop floor control systems. Assists, instructs and qualifies new operators. Reports deviations from standard procedures to engineering or supervisor and provides inputs on quality improvements. Systems - Assemble complex units for wiring, connecting difference sub-assemblies and nodes into large rack systems. Education / Experience Completion of a high school degree or equivalent is preferred. Typically requires 1 year of electronic assembly or related experience. Knowledge / Skills / Abilities Basic mechanical skills. Demonstrates basic manufacturing line knowledge and participates in process. Manual dexterity required for operating machinery and computers. Good attention to detail. Excellent eye-hand coordination required. Requires understanding of and ability to use a wide variety of tools. Basic computer skills. Must be able to use a microscope. Ability to read and comprehend simple instructions. Ability to effectively present information in one-on-one and small group situations to other employees, leads and supervisors of the organization. Scope / Impact Low impact, limited to the specific work area. Decision Making / Discretion Limited expectations to make decisions outside immediate work assignments. Decisions only affect individual tasks. Supervision / Leadership Able to understand and receive work instructions from line lead, supervisor/manager and manufacturing support. Receives detailed verbal and written general instructions on new assignments. Requires close supervision. Work Environment: While performing the duties of this job, the employee is regularly exposed to work that requires repetitive motion. Employee may be occasionally exposed to toxic or caustic chemicals. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Have the ability, visual acuity and manual aptitude to recognize and accurately assemble/install components according to manufacturing documentation. While performing the duties of this job, the employee is regularly required to sit, handle small components, and reach with hands and arms. The employee may be required to use a microscope for long periods of time. The employee frequently is required to talk and hear. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 20 pounds. Systems employees may lift up to 50 pounds and push 200 pound racks. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

The Assembler will work on production equipment, not automated, such as RF Sealer and will assist the production areas in various tasks including sorting, counting, 6S activities, replenishing supplies, organizing stock, hanging blades, and assignments. May serve as a backup to other positions at the direction of management; other duties as assigned. Duties and Responsibilities * Work on non-automated equipment such as RF Sealer and other kitting functions * Perform work per work instructions and area metrics * Keep work area clean by disposing empty boxes and cardboard, as well as keeping material * Inform proper personnel of material shortage * Train others in all areas * Adhere to all safety requirements in the work area * Practice 6S Knowledge, Skills and Abilities * Understand and follow verbal and written instructions * Basic math skills * Work well with others Education and Experience Requirements * High school diploma or equivalent Milwaukee Tool is an equal opportunity employer.

Centrifugal Assembler BH Job ID: 3604 SF Job Req ID: 16554 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title : Centrifugal Assembler Location : Buffalo, NY Schedule : Monday - Friday 7:00AM - 3:30 PM Pay Range : Starting Pay will range between $28.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled assembler to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. Responsibilities : * Perform a variety of tasks to support the assembly and test of industrial machinery and compression equipment within the plant, in accordance with predetermined standard work. * Read, understand, and apply method sheets, assembly diagrams, and blueprints. * Detect quality defects and unsafe conditions. * Be knowledgeable, and follow all applicable safety rules and procedures. * Interpretation of drawings and specifications to determine dimensions, identify materials for construction, and assemble components. * Operate power pneumatic and hand tools required for performing job duties. * Maintain and inspect tools and equipment and create work orders for repaired as needed. * Loading and unloading of equipment utilizing fork trucks, and hoists. * Work in a team environment, and assist co-workers in other areas as needed/directed, suggesting process improvement ideas. * Maintains safe and clean working environment by complying with procedures, rules, and regulations. * Material handling activities may include managing inventory levels by checking stock to determine inventory level, anticipating needed supplies, shipping and receipt of supplies. * Assembles components by examining connections for correct fit, fastening parts and subassemblies. * Perform general housekeeping of the work area. * Tasks can include but are not limited to welding, painting, operating machines and presses, assembly and disassembly of parts, wiring, shipping preparation, and performing quality checks and tests. * All other duties as assigned by the supervisor/team leader. Requirements : * High School Diploma or General Equivalent Diploma (GED) is required. * Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding. * Basic mechanical aptitude to use equipment and maintain general understanding of business process. * Familiar with and can utilize power tools. * Knowledgeable of and able to utilize computer systems. * Frequently required to sit, stand, and walk for extended periods. * Reaching and handling with high levels of dexterity. * Must be able to lift up to 25 pounds from floor to waist. Occasionally required to lift up to 50 pounds. * Occasionally required to work near moving mechanical equipment. * Frequent exposure to various chemicals, sealants, and lubricants. * Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. * Normal exposure to moderate noise levels. Occasional exposure to high noise, levels where hearing protection will be required. Core Competences : * Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures. * Able to rely on experience and judgment to plan and accomplish goals. * Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices. * Ability to identify routine problem causation, and correct routine problems, and willingness to learn. * Broad working knowledge and experience with standard work instructions. * Team oriented, must have the ability to work cohesively with others. * Must possess ability to work well in a manufacturing environment. * Must be detail-oriented and self-motivated. * Must be able to work in a multi-tasked environment. Preferences: * Three (3) years in manufacturing experience preferred. * Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred. Pay Range: Starting Pay will range between $28.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What we Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

Apply Description Assembly Employee COMPANY: United Equipment Accessories, Inc. Review blue prints and work instructions to produce accurate work product that meets quality standards, safety requirements and allotted run times while also meeting efficiency and productivity goals of the department Generate minimal waste and maintain a clean and organized work area at all times Other projects and duties as assigned by the Production Supervisor REPORTING RELATIONSHIPS: This position reports directly to the Production Supervisor. No positions report directly to this position. REQUIREMENTS: EDUCATION - High school diploma or equivalent is required. EXPERIENCE - Entry-level position - job assignment will be commensurate with the level of demonstrated skills through school and previous positions. Prior experience working in a manufacturing environment assembling components is a plus. SKILLS - Effective communication and listening skills are essential to collect and share work-related information with employees at all levels of the organization. Must be able to interpret and follow written and verbal instructions and utilize measuring instruments. Professionalism and the ability to work well in a team or individual setting is required. Superior attention to detail and strong mechanical aptitude is crucial to produce quality work and operate necessary equipment. PHYSICAL - Regularly required to stand or sit for long periods at a time, walk, bend, kneel and talk. Use of fingers, hands and arms is necessary to reach, grab, and assemble parts; as well as pushing and pulling motions to operate equipment. The ability to hear ( with mechanical assistance if necessary ) sufficiently to understand and comprehend individual one-on-one conversations is essential. Must be able to distinguish color and possess specific vision abilities including near vision, distance vision and ability to adjust focus ( with corrective lenses if necessary ) to perform the requirements of the position. Unassisted lifting up to 50 lbs. is required. MENTAL - Must be able to read, write and speak English fluently and possess basic math knowledge. The ability to communicate clearly on technical and business levels while maintaining professional conduct is essential. Must be able to read and interpret blue prints and work instructions and effectively work under time and budget constraints. WORKING CONDITIONS: The Assembly Employee will primarily work in a plant setting which is a smoke free environment that has typical factory hazards including noise, dust, cutting, drilling, finishing, solvents, lubricants, tripping hazards, blocked walkways, and hazards common to manufacturing such as sharp tools and objects, moving parts, metal shavings and slivers, unfinished surfaces, flames, sparks, and smoke. United Equipment Accessories, Inc. functions in a real market environment that changes at various times of the year which occasionally may create high output or greater time pressure demands. ESSENTIAL DUTIES, RESPONSIBILITIES, AND MEASUREMENTS OF PERFORMANCE: Follow rules and processes as outlined in the Employee Handbook and Safety and Quality Manuals as to conduct and performance standards expected of all employees Maintain a positive work attitude that reflects the UEA Core Values (Care, Hardworking/Dedicated, Creative Problem Solver and Knowledge Seeker) Responsible for familiarization with the complete scope and proposed method of design for all assigned United Equipment Accessories' projects Review blue prints, work instructions and the production schedule to achieve product specifications and allotted assembly time frame Operate assembly machinery and equipment to join, solder, attach, prepare, reinforce, or construct components as specified Remain on task, work efficiently, produce work with minimal waste, and complete work according to budgeted labor hours Accurately record work in process, job details, labor and attendance information utilizing ERP and other designated computer systems Select proper equipment and materials, verify integrity and maintain specifications through work process observation, making corrective adjustments as necessary Proper usage of gauges, hand tools and precision measurement tools to perform product validation and inspection to ensure quality conformity Report internal and external mistakes or issues that negatively impact operations, product quality or quantity to the supervisor or quality assurance in a timely manner Seek opportunities to increase overall efficiency, reduce job costing and optimize equipment, processes and materials Maintain a tidy work area and clean equipment Perform regular monitoring and service checks on tools and equipment, immediately reporting malfunctions, maintenance and repair requirements to ensure equipment meets optimal safety and performance levels Work individually or collaborate with others - when necessary or requested - to complete orders Demonstrate physical, regular, and punctual attendance and communicate scheduled and unscheduled absences in advance Complete tasks and projects accurately, timely and within budget and priority guidelines Follow through and communicate questions, project information and status to the appropriate people Demonstrate collaborative working relationships, good judgment, reasoning and professional conduct in all business interactions with employees at all levels of the organization Maintain a professional appearance and demeanor appropriate for the position and situation Perform other duties as directed by the Production Supervisor or designee

Assembler I BH Job ID: 3630 SF Job Req ID: 16699 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: Assembler (First shif Location: Southern Pines, NC About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled assemblerto perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product.This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great?manual dexterity. Ability to?interpret instructions represented in manuals, drawings, schematics etc. and follow?them with precision.? Responsibilities: * Read print drawings to determine dimensions, design, and materials for construction. * Assemble parts according to standard work / job breakdown sheets of unit being assembled, bill of materials and work order instructions, and assembly drawings * Fastens parts together with bolts, screws, speed clips, rivets, or other fasteners according to torque specifications * Operates pneumatic and manual presses to assist in assembly operation, which includes setting up the presses * Set-up and operate identification equipment (stampers, labelers, etc.) * Test product for compliance to meet specifications using manual and automatic test equipment * Paint, label and pack completed product for shipment * Achieve daily departmental productivity and quality levels * Follow all ISO procedures and safety rules, including wearing personal safety equipment * Keep Team Lead informed of mechanical/machine malfunctions or any supplies/tools needed * Handle product to and from stock * Perform in-process testing and make necessary corrections to meet standard work and Procedures for Qualification (PFQ) * Notify team lead of non-conformance material * Report changes in work orders, bill of materials, and pick lists to team lead. * Contribute to department/cell communication boards * Check off and sign work order cover sheets * Complete daily hour by hour production sheet * Maintain work area in accordance with 5S standards * Identify and report all safety issues to team lead * Participate and/or lead continuous improvement events and training * Suggest ideas for overall improvements to the area processes * Cross-train across multiple product lines * All other duties as assigned by the supervisor/team leader. Requirements: * High School Diploma or GED * 1+ years of experience in a manufacturing setting Core Competencies: * Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures. * Able to rely on experience and judgment to plan and accomplish goals. * Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices. * Ability to identify routine problem causation, and correct routine problems, and willingness to learn. Preferences: * 2+ years of experience in a manufacturing setting preferred. * Ability to read and comprehend simple instructions in English, short correspondence, and memos, such as supervisory instructions, safety rules, operating and maintenance instructions, procedure manuals, and work orders * Ability to effectively share information about job duties in one-on-one and small group situations to customers, clients, and other employees * Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding. * Basic mechanical aptitude to use equipment and maintain general understanding of business process. * Familiar with and can utilize power tools. * Forklift certification is required to operate forklift equipment, but is not a required job responsibility for assembly Travel & Work Arrangements/Requirements * This position will be based on-site SAFETY REQUIREMENTS While performing the duties of this job, the employee must wear OSHA approved safety glasses, hearing protection and steel toe safety shoes.? Gloves are required to be worn when handling or moving parts. OSHA approved hearing protection (ANSI approved ear plugs) is required when on the shop floor.? Painters must wear a respirator. * The following is a summary of the Job Safety Analysis (JSA) that was performed for this job: * Hazard communication, fire safety, Personnel Protective Equipment (PPE), & detailed JSA training will be reviewed before any job assignment.? The JSA describes identified hazards and what protection the employee must take to protect employees from injury. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.? Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to stand; use hands to finger; handle, or feel; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear * The employee must regularly lift and/or move boxes that weigh up to 50 pounds. The employee may be required to lift and/or move bar stock/baskets that vary in weight above these amounts.?The employee must get assistance from other co-workers or by using a material handling device, forklift, or hand truck when lifting items * The employee is freque ntly required to climb or balance; and to stoop, kneel, crouch, or crawl * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and depth perception WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, toxic or caustic chemicals, airborne particles and vibration from hammering of parts and using hand tools * Since it is a manufacturing environment, the noise level is usually loud due to the different machinery being operated (i.e. forklifts, hand tools, machines in other departments) and the testing that occurs. Normal noise exposure in the area ranges from 80-90 d BA; hearing protection is required while on the plant floor What we Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

11308 Hwy 36 Bellville Texas 77418-0640 **_Why Valmont_** **We're Here to Move the World Forward.** Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now. This position is an individual contributor entry Assembler role that is responsible for primarily pulling the cable as needed in the assembly of concrete poles in accordance with company's written procedures. The incumbent will also be assigned to assist in various tasks and duties in relation to the pole assembly process, pole inspection, and post-job cleanup. Essential Functions - CABLE PULLING: Verifying the strand, pulling the strand and placement into tip tension plate, pulling cable, cutting the strand, and placing the strand at the base tension plate. - ASSEMBLY OF POLE: Removing straps from coils; installation strand and spiral; installation of chucks on strand; marking hole patterns; cut cable; skill saw operation; marking poles; untangle spiral; tightening rebar; verify mold; cutting slacks with chop saw; inserting slacks; tying slacks; plate inspection; installation of 8mm wire, chucks on 8 mm wire, strand and spiral wire, structure rings, ground wire, ground tanks and rings, proper use of tie gun; sequence it takes to assemble a cage safely; recognizing the materials needed to assemble a cage; pull spiral to proper pitch; detention strand; wire puller; pulling and installing rings. - POLE INSPECTION: Work with lubrication molds operators on the group reinforcement tension stand and the cranes. Produce and control the correct implementation of the reinforced basket. Correct and fix the pre-stressing steel cars on the spire constantly. Work with Crane Operator to transfer products from basket to tension stand. Report noticed defects and faults to the manager. Conduct strenuous and physically demanding task for long hours and in extreme environmental conditions. Gather, inspect, repair and replace reusable materials and components for production rotation. Compliance with the general OHS and fire safety instructions and workplace instructions. - POST-JOB CLEANUP: Basic cleanup duties, general housekeeping, use of basic hand tools, and reading tape measure. Clean general work and ensure equipment, tools and materials are properly stored. - Other duties assigned by the management staff Other Important Details about the Role: - The ability to communicate and interact with coworkers in a professional manner - The ability to pay attention to detail and follow work instructions - The ability to work overtime as needed Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities) - High School Diploma or GED is highly desirable but not required - One year of general labor experience preferably in a manufacturing environment or willing to learn - The ability to communicate and interact with coworkers in a professional manner - The ability to pay attention to detail and follow work instructions - The ability to work overtime as needed - The ability to work in extreme temperatures with exposure to chemicals and irritating particulates - The ability to recognize and solve practical problems Highly Qualified Candidates Will Also Possess These Qualifications - High School Diploma or GED - Basic mathematics (Fractions and Measurement) - English comprehension (Read & Write) - More than one year of general labor experience preferably in a manufacturing environment - Experience in working with concrete or in a similar manufacturing environment - Knowledge of reading a tape measure and using basic hand tools. **Benefits** Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: + Healthcare (medical, prescription drugs, dental and vision) + 401k retirement plan with company match + Paid time off + Employer paid life insurance + Employer paid short-term and long-term disability including maternity leave + Work Life Support + Tuition Reimbursement up to $5,250 per year + Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2026-02-06 Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology. Valmont serves two primary markets - agriculture and infrastructure - and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries. That's what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world. + That's the value we add.

11308 Hwy 36 Bellville Texas 77418-0640 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. This position is an individual contributor entry Assembler role that is responsible for primarily pulling the cable as needed in the assembly of concrete poles in accordance with company's written procedures. The incumbent will also be assigned to assist in various tasks and duties in relation to the pole assembly process, pole inspection, and post-job cleanup. Essential Functions • CABLE PULLING: Verifying the strand, pulling the strand and placement into tip tension plate, pulling cable, cutting the strand, and placing the strand at the base tension plate. • ASSEMBLY OF POLE: Removing straps from coils; installation strand and spiral; installation of chucks on strand; marking hole patterns; cut cable; skill saw operation; marking poles; untangle spiral; tightening rebar; verify mold; cutting slacks with chop saw; inserting slacks; tying slacks; plate inspection; installation of 8mm wire, chucks on 8 mm wire, strand and spiral wire, structure rings, ground wire, ground tanks and rings, proper use of tie gun; sequence it takes to assemble a cage safely; recognizing the materials needed to assemble a cage; pull spiral to proper pitch; detention strand; wire puller; pulling and installing rings. • POLE INSPECTION: Work with lubrication molds operators on the group reinforcement tension stand and the cranes. Produce and control the correct implementation of the reinforced basket. Correct and fix the pre-stressing steel cars on the spire constantly. Work with Crane Operator to transfer products from basket to tension stand. Report noticed defects and faults to the manager. Conduct strenuous and physically demanding task for long hours and in extreme environmental conditions. Gather, inspect, repair and replace reusable materials and components for production rotation. Compliance with the general OHS and fire safety instructions and workplace instructions. • POST-JOB CLEANUP: Basic cleanup duties, general housekeeping, use of basic hand tools, and reading tape measure. Clean general work and ensure equipment, tools and materials are properly stored. • Other duties assigned by the management staff Other Important Details about the Role: • The ability to communicate and interact with coworkers in a professional manner • The ability to pay attention to detail and follow work instructions • The ability to work overtime as needed Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities) • High School Diploma or GED is highly desirable but not required • One year of general labor experience preferably in a manufacturing environment or willing to learn • The ability to communicate and interact with coworkers in a professional manner • The ability to pay attention to detail and follow work instructions • The ability to work overtime as needed • The ability to work in extreme temperatures with exposure to chemicals and irritating particulates • The ability to recognize and solve practical problems Highly Qualified Candidates Will Also Possess These Qualifications • High School Diploma or GED • Basic mathematics (Fractions and Measurement) • English comprehension (Read & Write) • More than one year of general labor experience preferably in a manufacturing environment • Experience in working with concrete or in a similar manufacturing environment • Knowledge of reading a tape measure and using basic hand tools. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2026-02-06

11308 Hwy 36 Bellville Texas 77418-0640 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce. Are you ready to move the world forward? Apply now. This position is an individual contributor entry Assembler role that is responsible for primarily pulling the cable as needed in the assembly of concrete poles in accordance with company's written procedures. The incumbent will also be assigned to assist in various tasks and duties in relation to the pole assembly process, pole inspection, and post-job cleanup. Essential Functions * CABLE PULLING: Verifying the strand, pulling the strand and placement into tip tension plate, pulling cable, cutting the strand, and placing the strand at the base tension plate. * ASSEMBLY OF POLE: Removing straps from coils; installation strand and spiral; installation of chucks on strand; marking hole patterns; cut cable; skill saw operation; marking poles; untangle spiral; tightening rebar; verify mold; cutting slacks with chop saw; inserting slacks; tying slacks; plate inspection; installation of 8mm wire, chucks on 8 mm wire, strand and spiral wire, structure rings, ground wire, ground tanks and rings, proper use of tie gun; sequence it takes to assemble a cage safely; recognizing the materials needed to assemble a cage; pull spiral to proper pitch; detention strand; wire puller; pulling and installing rings. * POLE INSPECTION: Work with lubrication molds operators on the group reinforcement tension stand and the cranes. Produce and control the correct implementation of the reinforced basket. Correct and fix the pre-stressing steel cars on the spire constantly. Work with Crane Operator to transfer products from basket to tension stand. Report noticed defects and faults to the manager. Conduct strenuous and physically demanding task for long hours and in extreme environmental conditions. Gather, inspect, repair and replace reusable materials and components for production rotation. Compliance with the general OHS and fire safety instructions and workplace instructions. * POST-JOB CLEANUP: Basic cleanup duties, general housekeeping, use of basic hand tools, and reading tape measure. Clean general work and ensure equipment, tools and materials are properly stored. * Other duties assigned by the management staff Other Important Details about the Role: * The ability to communicate and interact with coworkers in a professional manner * The ability to pay attention to detail and follow work instructions * The ability to work overtime as needed Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities) * High School Diploma or GED is highly desirable but not required * One year of general labor experience preferably in a manufacturing environment or willing to learn * The ability to communicate and interact with coworkers in a professional manner * The ability to pay attention to detail and follow work instructions * The ability to work overtime as needed * The ability to work in extreme temperatures with exposure to chemicals and irritating particulates * The ability to recognize and solve practical problems Highly Qualified Candidates Will Also Possess These Qualifications * High School Diploma or GED * Basic mathematics (Fractions and Measurement) * English comprehension (Read & Write) * More than one year of general labor experience preferably in a manufacturing environment * Experience in working with concrete or in a similar manufacturing environment * Knowledge of reading a tape measure and using basic hand tools. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: * Healthcare (medical, prescription drugs, dental and vision) * 401k retirement plan with company match * Paid time off * Employer paid life insurance * Employer paid short-term and long-term disability including maternity leave * Work Life Support * Tuition Reimbursement up to $5,250 per year * Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2026-02-06

Job Description Shop Assembly Assemble finished product using sub-assemblies, parts, and fasteners. Loads outbound shipments and unloads incoming deliveries. Shop Assembly Essential Duties and Responsibilities: Check specifications to determine required assembly, exterior finish on product, and any special directions Checks stock for adequate supplies of sub-assemblies, parts, and fasteners for the particular run Assembles components by examining connections for correct fit, fastening parts, and sub-assemblies, per customer order. Preps fully assembled equipment accurately in preparation for prompt shipment Loads outgoing shipments and unloads incoming deliveries. Maintains clean and safe working environment Help set up and tear down trade shows Makes short deliveries Performs other duties as requested, directed or assigned. Shop Assembly Experience and Education: High School Diploma (or GED or High School Equivalence Certificate) Experience using small hand and power tools 1+ year in shop or manufacturing environment Shop Assembly Essential Skills: Dependability Mechanical aptitude Experience operating a forklift

This position requires the assembling of many machine parts according to instructions and within a specific time frame, while using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as directed by the Lead Person or Supervisor. ESSENTIAL FUNCTIONS Read, interpret, and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately perform the assembly and wiring portion of the Automation build process. Train other employees how to build the subsections of Automation Equipment. Perform quality work checks to ensure the product meets quality standards. Identify product defects and complete appropriate documentation when defects are identified. Perform all work in accordance with quality standards and established safety procedures Maintain a clean and safe work area specified time frame. Performed adjustments needed to ensure factory settings and specifications using schematics and/or engineering documentation. Lifting up to 50 pounds unassisted. May be required to climb using a safety harness or ladder up to 16' feet tall. May be required to work beyond normal business hours when necessary. Supporting company policies and procedures, goals and objectives, ISO policies and good manufacturing practices. Must be able to work unsupervised at times. Must adhere to all safety policies and wear required PPE. Employees are to speak only English during an emergency and while performing job duties where there is potential for an emergency. The rule does not apply to casual conversations between employees when they are not performing a job duty. Non-field-related positions require in-office work 4-5 days a week at the assigned facility location. NON-ESSENTIAL FUNCTIONS Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to perform work accurately and thoroughly Demonstrate commitment to an Injury-Free Environment through own actions and mentoring others. Ability to use critical thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea. Communicate and enforce corporate environmental, health, and safety programs. Fill out forms, as needed. PAY RANGE Hourly rate of $20.00-$22.00 REPORTING RELATIONSHIP Lead Person Department Supervisor Production Manager SUBORDINATE STAFF None KNOWLEDGE Sit Down Forklift and Overhead Crane is highly preferred. Be able to use the metric system. Must be a good communicator and listener. Must be able to use Hand and Power Tools. Must have previous heavy equipment/ machinery assembly experience. Must know metric measurements. MATHEMATICAL SKILLS Ability to perform basic mathematical computations. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Must know metric measurements. PHYSICAL DEMANDS Lift up to 50 pounds unassisted, daily Walk and stand on cement flooring throughout a 10 hour shift Use fine motor skills to tighten bolts and wire. Constant bending, lifting, pulling, pushing, grasping, twisting at the waist, reaching above the head & reaching outward and kneeling. WORK ENVIRONMENT Climate Controlled year round Low noise decibel levels

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success -- so we give you unlimited access to everything you need to thrive and deliver your best. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to support the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Learn more about our story HERE. Your Role: As an Assembler you will assemble parts in an assigned area until final product is complete. Shift hours: 1st-7am-3pm; 2nd shift-3pm-11pm; 3rd shift 11pm-7am Duties and Responsibilities Work on non-automated equipment such as RF Sealer and other kitting functions Perform work per work instructions and area metrics Keep work area clean by disposing empty boxes and cardboard, as well as keeping material Inform proper personnel of material shortage Train others in all areas Adhere to all safety requirements in the work area Practice 6S Knowledge, Skills and Abilities Understand and follow verbal and written instructions Basic math skills Work well with others Education and Experience Requirements High school diploma or equivalent Physical and Weight Lifting Demands The physical and weight lifting demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Milwaukee Tool is an equal opportunity employer. Milwaukee Tool is an equal opportunity employer.

The responsibility of the Assembler is to take various molded products and trim and/or assemble them into finished goods within quality and efficiency standards. Duties and Responsibilities Pull and review work instructions prior to starting a job. Review production priorities. Ensures that all necessary information and tools required for each job are in place before work begins. Retrieves product for trimming or assembly and moves to designated areas when complete. Finishes molded product using various methods designated for the job. These methods include, but not limited to: Use of hand and power tools. Use of pallet jack. Use of hot iron. Use of open flame. Completes product labels and ensures product is identified throughout each operation. Responsible for final inspection of product and ensures that product is of good quality before shipping to the Customer. Use of Reporting system to record production. Knowledge, Skills and Abilities Good communication skills Good organizational skills Ability to read and write proficiently in English Ability to use hand and power tools Ability to operate and maintain industrial equipment Education and Experience 1-2 years' experience in manufacturing preferred Working Conditions Able to work in hot humid environment for extended periods of time. This job is in a typical manufacturing environment, to include, but not limited to: Ovens, torches, and rotating tools Forklifts and other moving machinery Loud work environment Physical Requirements Must be able to remain stationary with intermediate walking throughout the shift. Frequently lift parts weighing up to 50 pounds alone and parts more than 50 pounds with assistance and must be able to transport these up to 20 feet. Frequently positions self to maneuver around the parts, materials, and molds. Must be able to operate the hand and tools and write legible.

Job Description Assembler The Assembler is responsible for assembling components and systems used in the production of ambulances and specialty vehicles. This role requires attention to detail, the ability to follow work instructions, and a commitment to quality and safety in a fast-paced manufacturing environment. Key Responsibilities Assemble parts, subassemblies, and finished components per work instructions Install mechanical, electrical, and interior components Use hand tools, power tools, and measuring devices Read and follow blueprints, diagrams, and assembly instructions Inspect work for quality and accuracy; correct defects as needed Maintain a clean and organized work area Follow safety, quality, and production standards Work collaboratively with team members, leads, and quality personnel Qualifications High school diploma or GED required Manufacturing or assembly experience preferred Ability to read work instructions and basic drawings Familiarity with hand and power tools Strong attention to detail and manual dexterity Ability to work independently and as part of a team Preferred Experience Ambulance, automotive, RV, or specialty vehicle manufacturing Mechanical, electrical, or interior assembly experience Experience in a lean or production-based environment Physical Requirements Ability to lift up to 50 lbs Prolonged standing, bending, kneeling, reaching, and climbing Ability to work in a manufacturing environment Use of required personal protective equipment (PPE) What We Offer Competitive pay based on experience Medical, dental, and vision insurance 401(k) with company match Paid time off and paid holidays On-the-job training and advancement opportunities Stable work environment with consistent production Equal Opportunity Employer We are an equal opportunity employer and do not discriminate based on race, color, religion, sex, age, national origin, disability, veteran status, or any other protected status.

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our Rise talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company with problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. This is a position with WM Technologies, LLC and affiliate of SPX Enterprises, LLC, which manufactures and sells Weil-McLain branded products. Weil-McLain is a leading North American brand of hydronic comfort heating systems for residential, commercial, and institutional buildings since 1881. Position Responsibilities: Assembles cast iron section to relatively large or heavy subassemblies and complete units. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Stop the line due to Safety or Quality. Relies on instructions and pre-established guidelines to perform the functions of the job. Maintain area cleanliness in accordance with 5S principles. Uses hand tools and power tools to assemble block units according to product specifications. The most qualified candidates will demonstrate the following: May required a High School Diploma or GED Must be able to lift up to 50 pounds frequently May require 0-3 years of experience in the field or in a related area. Must qualify on at least one task and the upstream and downstream tasks. Must be able to use air/battery operated tools, lifting devices, and calibrated tools. Follows standard operating procedures and work instructions. Must have excellent attendance record. How we live our culture Our culture is at the center of what we do, and more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads. What Benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave Competitive health insurance plans and 401(k) match, with benefits starting day one Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion We value different backgrounds, experiences, and voices, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential. We are an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.

Assembles materials and products manually, operates auxiliary equipment and performs quality functions to ensure product meets quality criteria. Follow all work processes implemented in the department, all safety and company guidelines as outlined in Cambro employee handbook. ESSENTIAL JOB FUNCTIONS Ensures quality standards are maintained in handling, packaging and finishing of all products assembled/packaged. Comply with safety, operating policies, procedures regarding equipment, materials, and finished goods. Performs sanding, polishing, cleaning, assembly and packing job tasks as assigned. Ensures correct quantity of product per carton and proper assembly/packaging requirements are followed. Read and follow assembly schedule, write tickets and make labels, W.I.P., or products accurately. Verifies box and UPC label accuracy with packaged product. Fills out and maintains required data on production-related forms. Inspects the product at each step of the secondary and/or packaging process for quality defects. Performs necessary post-molding operations and rework as required to adhere to quality standards. Flexible to work on all packing/assembly operations Maintains a clean and organized workstation. Maintains strict housekeeping guidelines and safety practices at all times. Recognize and report any problems, issues, discrepancies, or questions to Process Technician and/or Supervisor in a timely fashion. Must be able to read and understand instructions for assembly, packaging and operating secondary machinery. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or up to six months related experience; or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively with employees of organization. Must be a good team player, self-motivated and open-minded. Must be able to work with minimal supervision, meet and maintain high quality work standards, and adapt quickly to new projects/assignments. Must be able to work any shift as needed. PREFERRED QUALIFICATIONS English preferred PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars, trucks, forklifts and other equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground Operation of foot controls or repetitive foot movement Risk of exposure to bio-hazard while working such as: bloodborne pathogens, sewage, hospital waste, etc. PPE REQUIREMENTS Safety glasses Utility gloves Steel-toe slip-resistant shoes Hardhat Hearing protection (e.g. ear plugs, ear muffs) Face shields Face covering (mask) in accordance with company policy. Mfg Assembler CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

is responsible for the manual assembly of materials and products. ESSENTIAL JOB FUNCTIONS Performs assembly and packing tasks assigned in various operations. Reads and follows assembly schedule. Interprets packaging instructions for proper accuracy of components as required per schedule. Maintains housekeeping standards consistently. Maintain reliable and consistent attendance, including being punctual, and dependable in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform job successfully. Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to immediate manager. Able to understand and demonstrate Cambro company culture, display company core values (Safety, Quality, Respect, and Service). Understands department's key performance indicators and contributes to achieve these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Less than high school education; or up to three months related experience or training; or equivalent combination of education and experience. Ability to communicate in English. Ability to read and interpret safety rules, procedures and SDS (Safety Data Sheets). Ability to add, subtract, multiply, and divide all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PREFERRED QUALIFICATIONS Working knowledge of AS400 system. High school diploma or equivalent plus one or more years' related experience. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Use of special visual or auditory protective equipment PPE REQUIREMENTS Safety glasses Safety -toe slip-resistant shoes Hearing protection (e.g. ear plugs, ear muffs) Mfg Assembler CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

What Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the world- improving the efficiency of today's industrial equipment and preparing for the future of motion on our planet and beyond. New employees can start contributing right away, and there are many opportunities to advance your career at your own pace. Join our global team of 19,000 people in 45 countries, and start helping our customers push the limits of what's possible in their world of motion. Assembler Scope: Precision assembly of bearing components into finished bearing assemblies for Aerospace applications. This is a second shift position, with regular work hours of 3:00 p.m. to 11:00 p.m. Monday - Friday. Required Skills Ability to read, interpret, and apply precise and complex technical work instructions Blue Print reading PC skills Mechanical trouble shooting and problem solving Attention to detail Flexibility Assembly experience Strong work ethic Willingness to work second shift Responsibilities Follow work instructions / training documents specific to each assembly, inspection, and packaging operations. Obtain, read, and use appropriate blueprints for product. Verify all parts and components match order and part numbers for assembly. Set up assembly and/or packaging machinery per specific work instructions and training documents. Perform ring washing operations per specific work instructions and training documents (if applicable). Perform assembly of bearings per specific work instructions and training documents. Perform quality inspections per work instructions and training documents. Perform packaging operations for bearing assemblies per work instructions and training documents. Laser mark bearings per training document. Complete all required documentation. Customer Focus - Apply clear understanding of customer (internal and external) technical requirements for each order. Assure conformance of all products and assemblies to requirements. Team Participation - Collaborate with a variety of plant teams focused on continuous improvement. Occasionally serve as facilitator of such teams. Regularly rotate to other tasks and assist team members in meeting Team Metrics. Training - Continuously develop and upgrade training materials used to train other Assemblers, and occasionally assist in training. Requires continuous self-development of skills and business knowledge and the exercise of both. Safety - Requires daily participation in individual and team safety responsibilities such as departmental inspections, maintaining good housekeeping, and proper use of Personal Protective Equipment (PPE). Continuous Improvement - Generate and implement ideas for quality improvements and cost savings. This position may require access to United States export controlled technical data (“CTD”) and hardware under the Departments of US State (ITAR) and/or Commerce (EAR). Eligible candidates are; US Citizens, Green Card holders, Asylees or others eligible to receive US export license authorizations. Candidate must be authorized to work in the US. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.