masaba services jobs - 20 jobs

General Job Description Responsibilities include the use of high-pressure equipment utilizing air to clean and prepare metal surfaces in preparation for painting. Work Experience Requirements Three year of previous experience using sandblasting tools and equipment as well as knowledge of corrosion-control methods and processes preferred Ability to use a powered air-purifying respirator (PAPR) which consists of a full face hood with supplied airline respirator. Ability to lift and/or move up to 50 lbs. Ability to work standing on hard surface (e.g. concrete) for up to 12 hours per day in hot or cold environment. Good hand and eye coordination Good visual acuity. Ability to work independently. Ability to climb, bends, kneels, crouch or stoop to perform various functions of the position. Ability to reach with hands and arms. Must have excellent attendance history. Must be able to work overtime and weekends if requested. Must be able to read and understand English. Must be able to perform basic shop math functions and use standard measuring devices. Other duties as assigned Physical Requirements: This position is typically in a manufacturing setting and requires standing for long periods of time. Requires good hand-eye coordinator, arm, hand and finger dexterity, including ability to grasp. Ability to manipulate (carry, lift, move) objects weighing up to 50 pounds. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

GENERAL JOB DESCRIPTION - Will be responsible for performing accurate troubleshooting & diagnosing, timely repairs, and component installation on all models of Masaba equipment to ensure proper factory specification and correct system operation - This position will require the technician to work in the field and well as in Masaba manufacturing facilities - Provides technical support over phone, email, and text to customers on maintenance and operational issues - Must be willing to work out of town, overtime, and weekends and needed - Hold follow up meeting with required personnel to discuss engineering changes and upgrades - Assist with final equipment inspections to ensure MASABA quality goals are met - Assist with continuous improvement of department processes WORK EXPERIENCE REQUIREMENTS - Must be able to work safely with minimal supervision while on customer sites and in the Masaba manufacturing facilities - Must be coachable, able to take direction, take initiative and follow through to completion - Must be willing to learn and improve skill level for future advancement - Attention to detail and conscientious nature - Strong sense of urgency along with customer service and verbal communication skills - Strong mechanical, electrical, and hydraulics system reasoning skills - Good judgment and strong critical thinking skills - Valid driver's license with good driving record - Must be able to obtain and maintain a passport - Must be able to obtain and maintain MSHA certification - Ability to work independently and with self-motivation - Must be able to communicate clearly in English - Ability to work standing on hard surface (e.g. concrete) for long periods of time in hot or cold environment - Must be able to read and interpret basic electrical, mechanical, and hydraulic blueprints - Must be able to perform basic shop math functions and use standard measuring devices - Ability to work with hand tools - Ability to work at heights including utilizing ladders and manlifts - Ability of hands to grasp and manipulate small objects/tools - Lift and carry up to fifty pounds and crawl in tight spaces - Ability to work at high elevation - Computer application literacy including Microsoft Office Suite (Word, Excell, etc.) and ability to learn internal business system

GENERAL JOB DESCRIPTION Responsible for creating complex models, layouts, drawings and BOM's for design of new projects and modification of previous designs. Equipment categories include a wide range of customized aggregate processing equipment including; Portable Washing, Screening, and Crushing Plants, and a wide variety of Conveyor Equipment. The Mechanical Designer will work closely with the Masaba team including sales, operations, purchasing and production. This fast-paced environment affords employee a challenging environment to grow and to expand their experience and skill sets in the discipline of mechanical engineering and general business. ESSENTIAL JOB REQUIREMENTS - Familiar with drafting standards, symbols, nomenclature, engineering terms, proper use of reference materials and vendor specifications related to a specific area of work. - Prepare clear, complete, and accurate detail drawings from rough or detailed sketches, notes, or project wrap-ups. - Implement and complete any design related functions per engineering. - Design innovative products and improvements to support projects. - Work on cost reduction or product enhancement projects. - Support the shop floor with any manufacturing problems that may occur. - Support engineers as a technical resource as needed. - Create Bills of Material for production orders that meet customer specifications. - Work with others to clarify or resolve design requirement questions. - Assist Manufacturing after projects are released and on design updates as required. - Complete assignments on time as scheduled by Engineering. - Comply with all safety rules and procedures. - Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - 2D CAD Drawings (AutoCAD) - 3D CAD Modeling (Inventor Preferred or Solidworks, Catia, Creo) - Vault/Data Management - Knowledge and understanding of welding concepts and weld symbols on drawings. - Geometric Dimensioning & Tolerancing (GD&T) - Microsoft Office Suite: Excel, Word, PowerPoint, Outlook - The ability to understand mechanical concepts and processes easily. - Ability to work with hands, hand tools and/or machine tools. Language Skills Strong writing and verbal communication skills required. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Excellent prioritization and project development skills. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have experience with 2D and 3D design software and the Microsoft Office Suite

Job DescriptionGeneral Description Responsible for operating various machines including break press, punch press, drill press, lathe, plasma table, and saw. Responsible for setup and operation of machines to produce precise and accurate results of structural steel per verbal instructions or by reading engineering drawings or blueprints and interpreting dimensions to the appropriate measurements on the machine. Must be mechanically inclined and can read a ruler and blueprints to interpret dimensions to the appropriate measurements on the machine. Understanding of measurements and basic math skills are a requirement. Work Experience Requirements 2 years experience with machine operation in manufacturing environment preferred but willing to train. Must have excellent attendance history. Must be able to lift and/or move up to 50 lbs. Ability to stand on hard surface for 10 -12 hour shift per day in hot or cold environment. Good hand and eye coordination. Good visual acuity. Ability to climb, bend, kneel, crouch or stoop to perform various functions of the position. Ability to reach with hands and arms. Ability to work independently. Must be able to read and understand English. Must be able to read and interpret blueprints. Must be able to perform basic shop math functions and use standard measuring devices. Physical Requirements: This position is typically in a manufacturing setting and requires standing for long periods of time. Requires good hand-eye coordinator, arm, hand and finger dexterity, including ability to grasp. Ability to manipulate (carry, lift, move) objects weighing up to 50 pounds. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description About the Role: The Tube Laser operator plays a critical role in the manufacturing process by precisely cutting and shaping metal tubes using advanced laser technology. This position requires a strong attention to detail to ensure that all components meet exact specifications and quality standards. The operator will be responsible for setting up, programming, and maintaining tube laser machinery to optimize production efficiency. Collaboration with engineering and quality control teams is essential to troubleshoot issues and implement improvements. Ultimately, the role contributes to producing high-quality parts that support the company's manufacturing goals and customer satisfaction. Minimum Qualifications: High school diploma or equivalent. Experience operating tube laser cutting machinery or similar CNC equipment. Basic understanding of reading technical drawings and blueprints. Familiarity with metal fabrication processes and materials. Ability to perform precise measurements and quality inspections. Preferred Qualifications: Certification in CNC machine operation or laser cutting technology. Experience with programming tube laser machines using CAD/CAM software. Knowledge of safety standards related to laser operation and metal fabrication. Strong mechanical aptitude and problem-solving skills. Previous experience working in a manufacturing or industrial environment. Responsibilities: Set up and operate tube laser cutting machines according to job specifications and blueprints. Program and adjust machine parameters to optimize cutting accuracy and efficiency. Inspect finished products for quality and adherence to specifications using measuring tools. Perform routine maintenance and troubleshooting on tube laser equipment to minimize downtime. Collaborate with engineering and production teams to improve processes and resolve technical issues. Maintain accurate production records and report any discrepancies or defects. Ensure compliance with safety protocols and company policies at all times. Skills: The required skills enable the operator to accurately interpret technical drawings and set up the tube laser machine for precise cutting tasks. Proficiency in machine operation and maintenance ensures smooth production flow and reduces equipment downtime. Quality inspection skills are essential to verify that finished parts meet stringent specifications, preventing defects and rework. Preferred skills such as programming with CAD/CAM software enhance the operator's ability to customize and optimize cutting processes. Strong problem-solving and mechanical skills support quick troubleshooting and continuous improvement in daily operations. Monday - Thursday 6:00 AM - 5:00 PM One hour lunch Some Fridays may be mandatory

GENERAL JOB DESCRIPTION Responsible for the ground up design of new projects and modification of previous designs. Equipment categories include a wide range of customized aggregate processing equipment including; Portable Washing, Screening, and Crushing Plants, and a wide variety of Conveyor Equipment. The Design Engineer will work closely with the Masaba team including sales, operations, purchasing and production. This fast- paced environment affords employee a challenging environment to grow and to expand their experience and skill sets in the discipline of mechanical engineering and general business. ESSENTIAL JOB REQUIREMENTS - Develop innovative products from concept to a manufacturable product while assuring design intent and integrity is maintained. - Design custom equipment that meets all technical requirements of assigned projects including new products, product enhancements, and cost reductions. - Perform analysis or calculations on project designs to achieve desired safety factors. - Applicable knowledge of Design for Manufacturing and Design for Assembly Principles as well as material optimization. - Initiate and implement design related cost reductions and quality improvement ideas. - Provide project management and follow through on assigned projects. - Develop and maintain design documentation including 2-D drawings, 3-D CAD designs and project specifications. - Organize and maintain BOM's for all assigned projects. - Collaborate with and Support internal departments with technical information. - Work collectively with Purchasing to obtain components and materials for projects. - Assist Manufacturing after projects are released and on design updates as required. - Complete assignments on time as scheduled by Engineering. - Comply with all safety rules and procedures. - Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - 2D CAD Drawings (AutoCAD) - 3D CAD Modeling (Inventor Preferred or Solidworks, Catia, Creo) - FEA - Analysis via hand calculation or FEA Software - Vault/Data Management - Knowledge and understanding of welding concepts and weld symbols on drawings - Geometric Dimensioning & Tolerancing (GD&T) - Microsoft Office Suite: Excel, Word, PowerPoint, Outlook - The ability to understand mechanical concepts and processes easily - Ability to work with hands, hand tools and/or machine tools. Language Skills Strong writing and verbal communication skills required. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Excellent prioritization and project development skills. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have experience with 2D and 3D design software and the Microsoft Office Suite

Responsibilities include welding wide ranges from light tacking to heavy flat, up weld and overhead. Verifies welds meet product specifications and quality standards. Works with blueprints to measure and position metal components for welding operation. Operates a wide range of power tools including, but not limited to saws, grinders, drills, welders, overhead cranes, hoists, and forklifts. Must be able to comply with company safety policies, keep work area clean and neat and perform regular maintenance on tools. Work Experience Requirements 1-2 years experience in MIG welding operations preferred; welding certificate/degree is a plus. Knowledge and ability to read, understand and follow job order specifications, work instructions and blueprints. Ability to problem solve. Good shop math skills, fractions, and decimals Must be able to use standard measuring devices. Ability to operate grinders, ironworkers, torch, etc. Ability to work standing on hard surface (e.g., concrete) for up to 10 hours per day in hot or cold environment. Good hand and eye coordination. Good visual acuity. Ability to climb, bend, kneel, crouch and stoop to perform various functions of the position. Ability to reach with hands and arms. Ability to lift and/or move up to 50 pounds. Ability to work independently. Must have excellent attendance history. Must be able to work overtime and weekends if requested. Must be able to speak, read and understand English.

GENERAL JOB DESCRIPTION - Will be responsible for performing accurate troubleshooting & diagnosing, timely repairs, and component installation on all models of Masaba equipment to ensure proper factory specification and correct system operation - This position will require the technician to work in the field and well as in Masaba manufacturing facilities - Provides technical support over phone, email, and text to customers on maintenance and operational issues - Must be willing to work out of town, overtime, and weekends and needed - Hold follow up meeting with required personnel to discuss engineering changes and upgrades - Assist with final equipment inspections to ensure MASABA quality goals are met - Assist with continuous improvement of department processes WORK EXPERIENCE REQUIREMENTS - Must be able to work safely with minimal supervision while on customer sites and in the Masaba manufacturing facilities - Must be coachable, able to take direction, take initiative and follow through to completion - Must be willing to learn and improve skill level for future advancement - Attention to detail and conscientious nature - Strong sense of urgency along with customer service and verbal communication skills - Strong mechanical, electrical, and hydraulics system reasoning skills - Good judgment and strong critical thinking skills - Valid driver's license with good driving record - Must be able to obtain and maintain a passport - Must be able to obtain and maintain MSHA certification - Ability to work independently and with self-motivation - Must be able to communicate clearly in English - Ability to work standing on hard surface (e.g. concrete) for long periods of time in hot or cold environment - Must be able to read and interpret basic electrical, mechanical, and hydraulic blueprints - Must be able to perform basic shop math functions and use standard measuring devices - Ability to work with hand tools - Ability to work at heights including utilizing ladders and manlifts - Ability of hands to grasp and manipulate small objects/tools - Lift and carry up to fifty pounds and crawl in tight spaces - Ability to work at high elevation - Computer application literacy including Microsoft Office Suite (Word, Excell, etc.) and ability to learn internal business system

GENERAL JOB DESCRIPTION Responsible for creating complex models, layouts, drawings and BOM's for design of new projects and modification of previous designs. Equipment categories include a wide range of customized aggregate processing equipment including; Portable Washing, Screening, and Crushing Plants, and a wide variety of Conveyor Equipment. The Mechanical Designer will work closely with the Masaba team including sales, operations, purchasing and production. This fast-paced environment affords employee a challenging environment to grow and to expand their experience and skill sets in the discipline of mechanical engineering and general business. ESSENTIAL JOB REQUIREMENTS - Familiar with drafting standards, symbols, nomenclature, engineering terms, proper use of reference materials and vendor specifications related to a specific area of work. - Prepare clear, complete, and accurate detail drawings from rough or detailed sketches, notes, or project wrap-ups. - Implement and complete any design related functions per engineering. - Design innovative products and improvements to support projects. - Work on cost reduction or product enhancement projects. - Support the shop floor with any manufacturing problems that may occur. - Support engineers as a technical resource as needed. - Create Bills of Material for production orders that meet customer specifications. - Work with others to clarify or resolve design requirement questions. - Assist Manufacturing after projects are released and on design updates as required. - Complete assignments on time as scheduled by Engineering. - Comply with all safety rules and procedures. - Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - 2D CAD Drawings (AutoCAD) - 3D CAD Modeling (Inventor Preferred or Solidworks, Catia, Creo) - Vault/Data Management - Knowledge and understanding of welding concepts and weld symbols on drawings. - Geometric Dimensioning & Tolerancing (GD&T) - Microsoft Office Suite: Excel, Word, PowerPoint, Outlook - The ability to understand mechanical concepts and processes easily. - Ability to work with hands, hand tools and/or machine tools. Language Skills Strong writing and verbal communication skills required. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Excellent prioritization and project development skills. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have experience with 2D and 3D design software and the Microsoft Office Suite

General Job Description Responsibilities include the use of high-pressure equipment utilizing air to clean and prepare metal surfaces in preparation for painting. Work Experience Requirements Three year of previous experience using sandblasting tools and equipment as well as knowledge of corrosion-control methods and processes preferred Ability to use a powered air-purifying respirator (PAPR) which consists of a full face hood with supplied airline respirator. Ability to lift and/or move up to 50 lbs. Ability to work standing on hard surface (e.g. concrete) for up to 12 hours per day in hot or cold environment. Good hand and eye coordination Good visual acuity. Ability to work independently. Ability to climb, bends, kneels, crouch or stoop to perform various functions of the position. Ability to reach with hands and arms. Must have excellent attendance history. Must be able to work overtime and weekends if requested. Must be able to read and understand English. Must be able to perform basic shop math functions and use standard measuring devices. Other duties as assigned Physical Requirements: This position is typically in a manufacturing setting and requires standing for long periods of time. Requires good hand-eye coordinator, arm, hand and finger dexterity, including ability to grasp. Ability to manipulate (carry, lift, move) objects weighing up to 50 pounds. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

General Description Responsible for operating various machines including break press, punch press, drill press, lathe, plasma table, and saw. Responsible for setup and operation of machines to produce precise and accurate results of structural steel per verbal instructions or by reading engineering drawings or blueprints and interpreting dimensions to the appropriate measurements on the machine. Must be mechanically inclined and can read a ruler and blueprints to interpret dimensions to the appropriate measurements on the machine. Understanding of measurements and basic math skills are a requirement. Work Experience Requirements 2 years experience with machine operation in manufacturing environment preferred but willing to train. Must have excellent attendance history. Must be able to lift and/or move up to 50 lbs. Ability to stand on hard surface for 10 -12 hour shift per day in hot or cold environment. Good hand and eye coordination. Good visual acuity. Ability to climb, bend, kneel, crouch or stoop to perform various functions of the position. Ability to reach with hands and arms. Ability to work independently. Must be able to read and understand English. Must be able to read and interpret blueprints. Must be able to perform basic shop math functions and use standard measuring devices. Physical Requirements: This position is typically in a manufacturing setting and requires standing for long periods of time. Requires good hand-eye coordinator, arm, hand and finger dexterity, including ability to grasp. Ability to manipulate (carry, lift, move) objects weighing up to 50 pounds. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

GENERAL JOB DESCRIPTION Responsible for the ground up design of new projects and modification of previous designs. Equipment categories include a wide range of customized aggregate processing equipment including; Portable Washing, Screening, and Crushing Plants, and a wide variety of Conveyor Equipment. The Design Engineer will work closely with the Masaba team including sales, operations, purchasing and production. This fast- paced environment affords employee a challenging environment to grow and to expand their experience and skill sets in the discipline of mechanical engineering and general business. E SSENTIAL JOB REQUIREMENTS - Develop innovative products from concept to a manufacturable product while assuring design intent and integrity is maintained. - Design custom equipment that meets all technical requirements of assigned projects including new products, product enhancements, and cost reductions. - Perform analysis or calculations on project designs to achieve desired safety factors. - Applicable knowledge of Design for Manufacturing and Design for Assembly Principles as well as material optimization. - Initiate and implement design related cost reductions and quality improvement ideas. - Provide project management and follow through on assigned projects. - Develop and maintain design documentation including 2-D drawings, 3-D CAD designs and project specifications. - Organize and maintain BOM's for all assigned projects. - Collaborate with and Support internal departments with technical information. - Work collectively with Purchasing to obtain components and materials for projects. - Assist Manufacturing after projects are released and on design updates as required. - Complete assignments on time as scheduled by Engineering. - Comply with all safety rules and procedures. - Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - 2D CAD Drawings (AutoCAD) - 3D CAD Modeling (Inventor Preferred or Solidworks, Catia, Creo) - FEA - Analysis via hand calculation or FEA Software - Vault/Data Management - Knowledge and understanding of welding concepts and weld symbols on drawings - Geometric Dimensioning & Tolerancing (GD&T) - Microsoft Office Suite: Excel, Word, PowerPoint, Outlook - The ability to understand mechanical concepts and processes easily - Ability to work with hands, hand tools and/or machine tools. Language Skills Strong writing and verbal communication skills required. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Excellent prioritization and project development skills. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have experience with 2D and 3D design software and the Microsoft Office Suite

About the Role:

Job Description Responsibilities include welding wide ranges from light tacking to heavy flat, up weld and overhead. Verifies welds meet product specifications and quality standards. Works with blueprints to measure and position metal components for welding operation. Operates a wide range of power tools including, but not limited to saws, grinders, drills, welders, overhead cranes, hoists, and forklifts. Must be able to comply with company safety policies, keep work area clean and neat and perform regular maintenance on tools. Work Experience Requirements 1-2 years experience in MIG welding operations preferred; welding certificate/degree is a plus. Knowledge and ability to read, understand and follow job order specifications, work instructions and blueprints. Ability to problem solve. Good shop math skills, fractions, and decimals Must be able to use standard measuring devices. Ability to operate grinders, ironworkers, torch, etc. Ability to work standing on hard surface (e.g., concrete) for up to 10 hours per day in hot or cold environment. Good hand and eye coordination. Good visual acuity. Ability to climb, bend, kneel, crouch and stoop to perform various functions of the position. Ability to reach with hands and arms. Ability to lift and/or move up to 50 pounds. Ability to work independently. Must have excellent attendance history. Must be able to work overtime and weekends if requested. Must be able to speak, read and understand English.

GENERAL JOB DESCRIPTION Responsible for creating complex models, layouts, drawings and BOM's for design of new projects and modification of previous designs. Equipment categories include a wide range of customized aggregate processing equipment including; Portable Washing, Screening, and Crushing Plants, and a wide variety of Conveyor Equipment. The Mechanical Designer will work closely with the Masaba team including sales, operations, purchasing and production. This fast-paced environment affords employee a challenging environment to grow and to expand their experience and skill sets in the discipline of mechanical engineering and general business. ESSENTIAL JOB REQUIREMENTS - Familiar with drafting standards, symbols, nomenclature, engineering terms, proper use of reference materials and vendor specifications related to a specific area of work. - Prepare clear, complete, and accurate detail drawings from rough or detailed sketches, notes, or project wrap-ups. - Implement and complete any design related functions per engineering. - Design innovative products and improvements to support projects. - Work on cost reduction or product enhancement projects. - Support the shop floor with any manufacturing problems that may occur. - Support engineers as a technical resource as needed. - Create Bills of Material for production orders that meet customer specifications. - Work with others to clarify or resolve design requirement questions. - Assist Manufacturing after projects are released and on design updates as required. - Complete assignments on time as scheduled by Engineering. - Comply with all safety rules and procedures. - Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - 2D CAD Drawings (AutoCAD) - 3D CAD Modeling (Inventor Preferred or Solidworks, Catia, Creo) - Vault/Data Management - Knowledge and understanding of welding concepts and weld symbols on drawings. - Geometric Dimensioning & Tolerancing (GD&T) - Microsoft Office Suite: Excel, Word, PowerPoint, Outlook - The ability to understand mechanical concepts and processes easily. - Ability to work with hands, hand tools and/or machine tools. Language Skills Strong writing and verbal communication skills required. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Excellent prioritization and project development skills. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have experience with 2D and 3D design software and the Microsoft Office Suite

General Job Description Responsibilities include the use of high-pressure equipment utilizing air to clean and prepare metal surfaces in preparation for painting. Work Experience Requirements Three year of previous experience using sandblasting tools and equipment as well as knowledge of corrosion-control methods and processes preferred Ability to use a powered air-purifying respirator (PAPR) which consists of a full face hood with supplied airline respirator. Ability to lift and/or move up to 50 lbs. Ability to work standing on hard surface (e.g. concrete) for up to 12 hours per day in hot or cold environment. Good hand and eye coordination Good visual acuity. Ability to work independently. Ability to climb, bends, kneels, crouch or stoop to perform various functions of the position. Ability to reach with hands and arms. Must have excellent attendance history. Must be able to work overtime and weekends if requested. Must be able to read and understand English. Must be able to perform basic shop math functions and use standard measuring devices. Other duties as assigned Physical Requirements: This position is typically in a manufacturing setting and requires standing for long periods of time. Requires good hand-eye coordinator, arm, hand and finger dexterity, including ability to grasp. Ability to manipulate (carry, lift, move) objects weighing up to 50 pounds. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

GENERAL JOB DESCRIPTION Responsible for the ground up design of new projects and modification of previous designs. Equipment categories include a wide range of customized aggregate processing equipment including; Portable Washing, Screening, and Crushing Plants, and a wide variety of Conveyor Equipment. The Design Engineer will work closely with the Masaba team including sales, operations, purchasing and production. This fast- paced environment affords employee a challenging environment to grow and to expand their experience and skill sets in the discipline of mechanical engineering and general business. ESSENTIAL JOB REQUIREMENTS - Develop innovative products from concept to a manufacturable product while assuring design intent and integrity is maintained. - Design custom equipment that meets all technical requirements of assigned projects including new products, product enhancements, and cost reductions. - Perform analysis or calculations on project designs to achieve desired safety factors. - Applicable knowledge of Design for Manufacturing and Design for Assembly Principles as well as material optimization. - Initiate and implement design related cost reductions and quality improvement ideas. - Provide project management and follow through on assigned projects. - Develop and maintain design documentation including 2-D drawings, 3-D CAD designs and project specifications. - Organize and maintain BOM's for all assigned projects. - Collaborate with and Support internal departments with technical information. - Work collectively with Purchasing to obtain components and materials for projects. - Assist Manufacturing after projects are released and on design updates as required. - Complete assignments on time as scheduled by Engineering. - Comply with all safety rules and procedures. - Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - 2D CAD Drawings (AutoCAD) - 3D CAD Modeling (Inventor Preferred or Solidworks, Catia, Creo) - FEA - Analysis via hand calculation or FEA Software - Vault/Data Management - Knowledge and understanding of welding concepts and weld symbols on drawings - Geometric Dimensioning & Tolerancing (GD&T) - Microsoft Office Suite: Excel, Word, PowerPoint, Outlook - The ability to understand mechanical concepts and processes easily - Ability to work with hands, hand tools and/or machine tools. Language Skills Strong writing and verbal communication skills required. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Excellent prioritization and project development skills. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have experience with 2D and 3D design software and the Microsoft Office Suite

General Description Responsible for operating various machines including break press, punch press, drill press, lathe, plasma table, and saw. Responsible for setup and operation of machines to produce precise and accurate results of structural steel per verbal instructions or by reading engineering drawings or blueprints and interpreting dimensions to the appropriate measurements on the machine. Must be mechanically inclined and can read a ruler and blueprints to interpret dimensions to the appropriate measurements on the machine. Understanding of measurements and basic math skills are a requirement. Work Experience Requirements 2 years experience with machine operation in manufacturing environment preferred but willing to train. Must have excellent attendance history. Must be able to lift and/or move up to 50 lbs. Ability to stand on hard surface for 10 -12 hour shift per day in hot or cold environment. Good hand and eye coordination. Good visual acuity. Ability to climb, bend, kneel, crouch or stoop to perform various functions of the position. Ability to reach with hands and arms. Ability to work independently. Must be able to read and understand English. Must be able to read and interpret blueprints. Must be able to perform basic shop math functions and use standard measuring devices. Physical Requirements: This position is typically in a manufacturing setting and requires standing for long periods of time. Requires good hand-eye coordinator, arm, hand and finger dexterity, including ability to grasp. Ability to manipulate (carry, lift, move) objects weighing up to 50 pounds. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

About the Role: The Tube Laser operator plays a critical role in the manufacturing process by precisely cutting and shaping metal tubes using advanced laser technology. This position requires a strong attention to detail to ensure that all components meet exact specifications and quality standards. The operator will be responsible for setting up, programming, and maintaining tube laser machinery to optimize production efficiency. Collaboration with engineering and quality control teams is essential to troubleshoot issues and implement improvements. Ultimately, the role contributes to producing high-quality parts that support the company's manufacturing goals and customer satisfaction. Minimum Qualifications: High school diploma or equivalent. Experience operating tube laser cutting machinery or similar CNC equipment. Basic understanding of reading technical drawings and blueprints. Familiarity with metal fabrication processes and materials. Ability to perform precise measurements and quality inspections. Preferred Qualifications: Certification in CNC machine operation or laser cutting technology. Experience with programming tube laser machines using CAD/CAM software. Knowledge of safety standards related to laser operation and metal fabrication. Strong mechanical aptitude and problem-solving skills. Previous experience working in a manufacturing or industrial environment. Responsibilities: Set up and operate tube laser cutting machines according to job specifications and blueprints. Program and adjust machine parameters to optimize cutting accuracy and efficiency. Inspect finished products for quality and adherence to specifications using measuring tools. Perform routine maintenance and troubleshooting on tube laser equipment to minimize downtime. Collaborate with engineering and production teams to improve processes and resolve technical issues. Maintain accurate production records and report any discrepancies or defects. Ensure compliance with safety protocols and company policies at all times. Skills: The required skills enable the operator to accurately interpret technical drawings and set up the tube laser machine for precise cutting tasks. Proficiency in machine operation and maintenance ensures smooth production flow and reduces equipment downtime. Quality inspection skills are essential to verify that finished parts meet stringent specifications, preventing defects and rework. Preferred skills such as programming with CAD/CAM software enhance the operator's ability to customize and optimize cutting processes. Strong problem-solving and mechanical skills support quick troubleshooting and continuous improvement in daily operations. Monday - Thursday 6:00 AM - 5:00 PM One hour lunch Some Fridays may be mandatory