Design Engineer jobs at Colliers Engineering & Design - 4319 jobs

A technology company is seeking a Physical Design Engineer in San Jose, California. In this role, you will manage backend implementation for FPGA/SoC devices, execute implementation tasks, and apply optimization techniques. Candidates should have a Bachelor's degree in Electrical Engineering or a related field, along with 3+ years of experience in physical design and proficiency in industry-standard EDA tools. The salary range for this position is $113,700 - $164,700 USD, with responsibilities including debugging design issues and collaborating with various teams. #J-18808-Ljbffr

Altera .Physical Design Engineer page is loaded## Physical Design Engineerlocations: San Jose, California, United Statestime type: Full timeposted on: Posted Todayjob requisition id: R01871# **Job Details:**### ## **Job Description:****About the Role:**As a **Physical Design Engineer** at Altera, you will play a critical role in the backend implementation flow - from RTL/netlist through GDSII/tape-out for FPGA/SoC devices. You will collaborate with architecture, logic design, DFT, CAD/EDA, and manufacturing teams to achieve performance, power, and area (PPA) goals, with a particular emphasis on programmable logic structures, block and full-chip integration, and the unique demands of FPGA technologies (e.g., configurable logic blocks, routing fabrics, I/O rings, on-chip power domains).**Key Responsibilities:*** Execute physical design implementation tasks (floorplanning, power planning, placement, clock tree synthesis (CTS), routing, engineering change orders (ECO), extraction, sign-off preparation) from netlist to GDSII.* Apply PPA optimization techniques (performance/timing closure, power reduction, area efficiency) across block-level and full-chip hierarchies.* Collaborate with front-end design, architecture, and CAD/EDA tool teams to ensure physical design constraints, timing budgets, power budgets, and DFT insertions are met.* Develop and enhance physical design flows, methodologies, scripts, and automation frameworks (TCL, Python, Perl) to accelerate turnaround, improve QoR, and reduce manual intervention.* Participate in timing, power, EM/IR integrity, signal/power noise, and DRC/LVS/ERC verification for sign-off readiness.* Integrate FPGA-specific physical design aspects: configurable logic block placement, fabric routing, I/O ring optimization, power domains for programmable regulation, and yield optimization.* Debug physical design issues and interact with CAD tool vendors and internal tool teams to drive tool enhancements or workarounds.**Salary Range**The pay range below is for Bay Area California only. Actual salary may vary based on a number of factors including job location, job-related knowledge, skills, experiences, trainings, etc. We also offer incentive opportunities that reward employees based on individual and company performance.**$113,700 - $164,700 USD**We use artificial intelligence to screen, assess, or select applicants for the position. Applicants must be eligible for any required U.S. export authorizations.### ## **Qualifications:****Minimum Qualifications:**Bachelor's degree in Electrical Engineering, Computer Engineering, or related field with 3+ years of experience in:* Hands-on digital/SoC physical design (synthesis through P&R and sign-off).* Industry-standard EDA tools (e.g., Synopsys IC Compiler/Fusion, Cadence Innovus/Encounter, PrimeTime, STAR-RCX, Calibre) for high-speed digital ASIC/SoC implementation.* Scripting/programming (TCL, Python, Perl, shell) for flow automation and productivity enhancement.* Physical design flow: floorplanning, CTS, placement, routing, power domain gating, clock domain crossing, multi-power domain design, timing closure, ECOs, and DRC/LVS/DFM resolution.* Power/IR analysis, signal/power integrity reporting, and corrective action planning.* Interfacing with front-end teams (RTL, architecture), CAD/EDA tool teams, and manufacturing/packaging teams**Preferred Qualifications:*** Experience with advanced process nodes (7nm, 5nm or smaller) or FPGA/programmable logic device flows.* Familiarity with FPGA architecture: routing fabrics, programmable logic blocks (PLBs), on-chip networks, I/O rings, static/dynamic reconfiguration.* Expertise in low-power design methodologies, power grid design, power gating, multi-voltage domain implementation, and power sign-off flows.* Prior exposure to full-chip integration flows (block-to-chip convergence) and high-frequency (1 GHz+) timing closure.* Experience in high-volume manufacturing environments, including yield and DFM/DFY considerations.* Experience mentoring or leading small physical design sub-teams or owning major P&R blocks.### ## **Job Type:**Regular### ## **Shift:**Shift 1 (United States of America)### ## **Primary Location:**San Jose, California, United States### ## **Additional Locations:**### ## **Posting Statement:**All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. #J-18808-Ljbffr

where associates are heavily supervised and are expected to learn and assist with all engineering design aspects of a project. Once trained, associates in this position will be responsible for their own design projects and may check the work of others. Responsibilities Design all parking deck, building, and wall products, and associated connections With assistance, design laterals Independently manage engineering design aspects of a project with minimal assistance or guidance Review contract documents to be familiar with project requirements Attend project meetings as directed; may lead coordination meetings May write requests for information (RFI) With assistance, answer questions from drafting subcontractors Resolve engineering design issues independently (with the exception of laterals) Assist others with resolving engineering design issues (with the exception of laterals) Check engineering design calculations and details of others for accuracy, efficiency, and adherence to Metromont standards (with the exception of laterals) and Engineering Design Process Review erection drawings, master shop tickets, and any additional shop tickets to ensure designs and standards are followed With assistance, complete repairs Must adhere to all Metromont and OSHA safety rules and regulations. Job Description Strong personal organization skills Above average ability to manage multiple priorities Self-motivated Demonstrated ability to manage multiple projects and priorities, maintain project schedules, and work effectively within a project team Above average assertiveness; proactive addressing issues or problems on projects Able to adapt to changes in work schedules, tasks, or processes Values and demonstrates safe working behaviors Strong communication skills Able to document ongoing information on projects for record keeping purposes BS Civil Engineering required

Joining Arup Arup's purpose, shared values, and collaborative approach has set us apart for over 75 years, guiding how we shape a better world. The Opportunity We are looking for an Associate Principal, Mechanical Engineer / Project Manager to join our growing multi-disciplinary team in New York (or New Jersey with flexibility to support the NY market). You will lead mechanical design and coordination for a variety of projects, including healthcare, academic buildings, institutional and government buildings, museums, laboratories, commercial offices, and mission critical facilities. This strategic hire is part of our long-term growth plan and will help strengthen our market-facing capabilities in the region. You will be responsible for contributing to business development efforts, leading projects as a PM and mentoring junior staff. As a senior leader, you will help grow the office both in terms of staff and revenue. The current team has a wide range of experience and needs support and guidance. You will be supported by the wider Arup team in the region, giving you the opportunity to grow within the organization and rise in leadership. Being part of a wider multi-disciplinary team, you will collaborate across disciplines on challenging and meaningful projects. You will provide technical support, identify key staffing needs, and take responsibility for both the technical and financial success of your projects. With Arup's flexible working policy, we expect our leaders to lead by example-being visible and accessible in the office to support our junior team members and foster a culture of excellence. The opportunity: We are seeking a candidate who brings: 10-15 years of mechanical engineering design experience, ideally in complex MEP systems. Professional Engineer (PE) license, ideally in the State of New York Experience managing large-scale projects from start to finish, with exposure to full lifecycle delivery. A strong presence in the New York market, with familiarity with local codes, clients, and project delivery. Broad sector experience, including: Property (large-scale) Healthcare Central plant (preferred but not required) Data centers / SIT (a plus) Proven leadership and mentoring capabilities. Ability to settle into a senior role and build trust quickly. The skills: Minimum 10 years of related experience with a consistent record of mechanical system design for buildings, incorporating sustainability goals. Bachelor's Degree in Mechanical Engineering required. PE required; experienced engineer of record preferred. Experience negotiating contracts, terms, and conditions aligned with commercial objectives. Proven ability to identify and win new projects aligned with strategic goals. Strong client relationship management and business development skills. Experience preparing proposals and bid submissions. Ability to identify and mitigate technical, regulatory, and contractual risks. Focus on low-carbon and zero-energy design strategies. Financial acumen in monitoring budgets, expenses, and project performance. Implementation of quality control and risk management practices. Experience identifying staffing needs and participating in recruitment and hiring. Commitment to mentoring and career development of team members. Preferred Qualifications: NCEES certification. LEED Accreditation, WELL Certification, or ASHRAE BXCP Certification. LEED AP BD+C. The Benefits - What We Offer You Please note that all applicants must apply directly via the job portal. If this role is not quite what you are looking for, but you are interested in other opportunities for a future with purpose, please sign up to our Talent Community where you will be kept up to date with roles suitable for you to shape a better world. What we offer you At Arup, we care about each member's success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognizes the contribution of each of our members to our shared success. As well as competitive, fair and equitable pay, we offer a career in which all of our members can belong, grow and thrive - through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup's legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling members to share in the results of our collective efforts. Benefits at Work - At Arup, we have a comprehensive and valuable benefits program that works for our employees and their families while keeping costs low. These benefits provide health and welfare security for you as well as paid time off for rest and renewal. As a member of Arup, everyone shares in our success through a global profit share scheme (payments are dependent on the firm's financial performance). Our Global Profit Share Plan (paid bi-annually) provides an opportunity for you to share in the success of the Firm. As a valued employee of Arup, you can also choose to participate in our 401(k) plan with up to 10% company match to help you save for your future Flexible Working - We believe that flexible arrangements create a more inclusive way of working that supports our diversity and the wellbeing of our people. Options for alternative schedules and the ability to work outside of the office for a portion of your workweek are available New York / New Jersey Hiring Range - The good faith base salary hiring range for this job if performed in NY/NJ is $171,000 to $240,000 per year. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of NY/NJ will differ. Different People, Shared Values Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at *************************************** Our Application Process We will be reviewing our candidates for this position on a rolling basis. Once you have applied you will be evaluated and potentially moved on to the next round, at which point a member of the talent resourcing team will reach out to you directly. Arup is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. Stay safe online. Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. #LI-AR2

ReqID: NEW00020A **Joining Arup** Arup's purpose, shared values, and collaborative approach has set us apart for over 75 years, guiding how we shape a better world. **The Opportunity** We are looking for an **Associate Principal, Mechanical Engineer / Project Manager** to join our growing multi-disciplinary team in New York (or New Jersey with flexibility to support the NY market). You will lead mechanical design and coordination for a variety of projects, including healthcare, academic buildings, institutional and government buildings, museums, laboratories, commercial offices, and mission critical facilities. This strategic hire is part of our long-term growth plan and will help strengthen our market-facing capabilities in the region. You will be responsible for contributing to business development efforts, leading projects as a PM and mentoring junior staff. As a senior leader, you will help grow the office both in terms of staff and revenue. The current team has a wide range of experience and needs support and guidance. You will be supported by the wider Arup team in the region, giving you the opportunity to grow within the organization and rise in leadership. Being part of a wider multi-disciplinary team, you will collaborate across disciplines on challenging and meaningful projects. You will provide technical support, identify key staffing needs, and take responsibility for both the technical and financial success of your projects. With Arup's flexible working policy, we expect our leaders to lead by example-being visible and accessible in the office to support our junior team members and foster a culture of excellence. **The opportunity:** · We are seeking a candidate who brings: · 10-15 years of mechanical engineering design experience, ideally in complex MEP systems. · Professional Engineer (PE) license, ideally in the State of New York · Experience managing large-scale projects from start to finish, with exposure to full lifecycle delivery. · A strong presence in the New York market, with familiarity with local codes, clients, and project delivery. · Broad sector experience, including: · Property (large-scale) · Healthcare · Central plant (preferred but not required) · Data centers / SIT (a plus) · Proven leadership and mentoring capabilities. · Ability to settle into a senior role and build trust quickly. **The skills:** · Minimum 10 years of related experience with a consistent record of mechanical system design for buildings, incorporating sustainability goals. · Bachelor's Degree in Mechanical Engineering required. · PE required; experienced engineer of record preferred. · Experience negotiating contracts, terms, and conditions aligned with commercial objectives. · Proven ability to identify and win new projects aligned with strategic goals. · Strong client relationship management and business development skills. · Experience preparing proposals and bid submissions. · Ability to identify and mitigate technical, regulatory, and contractual risks. · Focus on low-carbon and zero-energy design strategies. · Financial acumen in monitoring budgets, expenses, and project performance. · Implementation of quality control and risk management practices. · Experience identifying staffing needs and participating in recruitment and hiring. · Commitment to mentoring and career development of team members. **Preferred Qualifications:** · NCEES certification. · LEED Accreditation, WELL Certification, or ASHRAE BXCP Certification. · LEED AP BD+C. · The Benefits - What We Offer You Please note that all applicants must apply directly via the job portal. If this role is not quite what you are looking for, but you are interested in other opportunities for a future with purpose, please sign up to our Talent Community where you will be kept up to date with roles suitable for you to shape a better world. **What we offer you** At Arup, we care about each member's success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognizes the contribution of each of our members to our shared success. As well as competitive, fair and equitable pay, we offer a career in which all of our members can belong, grow and thrive - through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup's legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling members to share in the results of our collective efforts. **Benefits at Work** - At Arup, we have a comprehensive and valuable benefits program that works for our employees and their families while keeping costs low. These benefits provide health and welfare security for you as well as paid time off for rest and renewal. As a member of Arup, everyone shares in our success through a global profit share scheme (payments are dependent on the firm's financial performance). Our Global Profit Share Plan (paid bi-annually) provides an opportunity for you to share in the success of the Firm. As a valued employee of Arup, you can also choose to participate in our 401(k) plan with up to 10% company match to help you save for your future **Flexible Working -** We believe that flexible arrangements create a more inclusive way of working that supports our diversity and the wellbeing of our people. Options for alternative schedules and the ability to work outside of the office for a portion of your workweek are available **New York / New Jersey Hiring Range** - The good faith base salary hiring range for this job if performed in NY/NJ is $171,000 to $240,000 per year. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of NY/NJ will differ. **Different People, Shared Values** Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at *************************************** **Our Application Process** We will be reviewing our candidates for this position on a rolling basis. Once you have applied you will be evaluated and potentially moved on to the next round, at which point a member of the talent resourcing team will reach out to you directly. **Arup is an equal opportunity employer.** All qualified applicants will receive consideration without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. **Stay safe online.** Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. \#LI-AR2 EOE-Protected Veterans/Disability

Role - Mechanical Design Engineer (Plastics) Salary - $80,000 - $105,000 per year (dependent on experience) Type - Permanent My client is a well-established manufacturer and product development business specializing in engineered components and assemblies. They are looking to add an experienced Mechanical Design Engineer with a strong background in plastic materials to support the design, development, and optimization of plastic parts used across their product range. This is a design-focused role working closely with manufacturing, tooling, and quality teams to deliver robust, production-ready plastic components from concept through to release. The Mechanical Design Engineer will have the following attributes: 3+ years of experience as a Mechanical Design Engineer with a focus on plastic component design. Strong understanding of plastic materials, properties, and selection (e.g. ABS, PC, Nylon, PP, reinforced plastics). Hands-on experience designing injection-molded plastic parts and assemblies. Proficient in 3D CAD software such as SolidWorks, Creo, or Inventor. Experience producing detailed engineering drawings, tolerances, and GD&T. Good knowledge of DFM/DFA principles for plastic manufacturing processes. Detail-oriented with strong problem-solving and communication skills. Comfortable collaborating with cross-functional engineering and manufacturing teams. The Mechanical Design Engineer's role will involve: Designing and developing plastic components and assemblies from concept through production. Selecting appropriate plastic materials based on performance, cost, and manufacturability. Creating 3D models, detailed drawings, and BOMs to support manufacturing. Collaborating with tooling suppliers on mold design, reviews, and first-article approvals. Supporting prototyping, testing, validation, and design improvements. Working closely with manufacturing and quality teams to resolve production issues. Contributing to continuous improvement and design standardization initiatives. For more information about this Mechanical Design Engineer opportunity, please apply, or email Jack Smillie at *******************, who will be able to provide more details on the position. Many thanks, Premier Group

A cutting-edge startup is seeking a Senior Mechanical Engineer in San Francisco to design and develop robotic components for cell therapy manufacturing. You will lead projects from conception to production using CAD and collaborate with cross-functional teams. Ideal candidates have extensive mechanical design experience, especially in bioprocess consumables or medical devices. The position offers a competitive salary and benefits, including health insurance and flexible PTO. #J-18808-Ljbffr

Wish your job made a difference? Our mission is protecting the world's water. We work every day to support the sustainability of our most precious resource, so our people know what they're doing matters. Join our team and do work that matters. Visit www.orenco.com/jobs to learn more or check out the official job description (below). GENERAL POSITION SUMMARY The Senior Composite Design Engineer will lead the development and design of FRP (fiber-reinforced polymer composite products for infrastructure applications. This engineer leader will utilize their strong background in composite materials and processes, particularly in closed molding methods such as RTM (Resin Transfer Molding) and vacuum infusion, structural engineering capabilities and knowledge of infrastructure and related codes to develop infrastructure products like tanks, buildings, and structural covers. ESSENTIAL FUNCTIONS and KRA (Key Result Areas) Safety/Culture Continuously maintains Orenco management's safety, cultural, and professional standards. Promotes, encourages, and reinforces a positive safety culture, safe practices, and a safe work environment to all employees. Key Responsibilities Lead the design and development of FRP composite products for infrastructure applications. Collaborate with the Composite Sales Manager to develop tailored design solutions for customer projects. Collaborate with the Composite Sales Manager to identify new product development opportunities and cultivate strategic OEM (Original Equipment Manufacturing) relationships that drive innovation and long‑term business growth. Drive value engineering initiatives to enhance design efficiency and reduce cost. Oversee and optimize manufacturing processes, especially closed molding techniques (RTM, vacuum infusion). Collaborate on material selection, including resins, reinforcements, core materials, adhesives, and coatings. Interpret and apply relevant codes and standards (e.g., IBC (International Building Code), AASHTO (American Association of State Highway and Transportation Officials), ASCE (American Society of Civil Engineers), ASTM (American Society for Testing and Materials), etc.) to ensure code compliance in structural designs. Perform structural analysis and guide product testing and validation. Work closely with the retiring engineer through a transition period to absorb institutional knowledge, processes, and legacy designs. Support cross‑functional teams including production, QA/QC (Quality Assurance/Quality Control), sales, and product and project management. Interface with customers, certification agencies, and third‑party engineers as needed. Represent the company at key composite industry events (e.g., trade shows, technical conferences) to stay current with industry trends and strengthen professional networks. Regular, consistent, and predictable attendance is required. Performs other duties as assigned. EDUCATION Bachelor's degree in Mechanical Engineering, Civil Engineering, Structural Engineering, Materials Science, or related field. KNOWLEDGE/SKILLS/EXPERIENCE Minimum 5 years' experience in composite product design ( 10 + years preferred). Expertise in closed-mold composite processes Strong structural engineering capabilities and working knowledge of composite materials - resins, fibers, cores, adhesives, etc. Familiarity with infrastructure products and relevant codes and standards for infrastructure (IBC, ACI (American Concrete Institute), AISC (American Institute of Steel Construction), ASCE, AASHTO, ASTM). Proficiency in 3D modeling CAD (Computer‑aided design) (e.g., SolidWorks, Inventor, etc.). SolidWorks preferred. Proficiency in structural analysis tools desired, but not required (e.g., FEA (Finite Element Analysis) software like ANSYS (Engineering Simulation Software), SolidWorks Simulation, or similar). PE (Professional Engineer) license is highly beneficial but not required. Demonstrated ability to work independently and collaboratively in a multidisciplinary environment. Excellent communication skills and documentation practices. Ability to be flexible and change priorities with little notice. Ability to use sound judgement and follow through in problem solving and decision‑making processes. Must be willing and able to travel. Must be able to comply with current travel regulations and guidelines of airlines and destination locations. Must be able to meet and maintain Orenco's approved driver criteria; a valid driver's license, satisfactory driving record, current insurance on personal vehicle, and meet company insurability requirements. TOOLS and EQUIPMENT Computer General office equipment Multi line phone and/or VoIP Vehicle WORKING CONDITIONS Primarily indoor/outdoor working environment including time in production areas and at project sites. Travel requirements may include operation of a motor vehicle, airplane travel, and overnight stays in temporary lodging. May require the ability to visit project sites that are situated on a variety of developed and undeveloped terrain/locations. Includes exposure to outside weather conditions and occasional exposure to dust and other outside elements that may require the proper use of PPE (personal protective equipment) including but not limited to gloves. Work to be done during manufacturing business hours, however this position may on occasion work outside business hours to support department and business needs. Occasionally long hours may be required. PHYSICAL REQUIREMENTS Regular job duties include seeing, speaking, hearing, reading, writing, legible handwriting, keyboarding, prolonged periods of sitting including extended time viewing a computer screen. Intermittent physical activity includes but is not limited to touching, holding, grasping, pushing, pulling, reaching above shoulders and below knees, low back bending, twisting, turning, kneeling, crawling, stooping, squatting, standing, walking, and climbing stairs and ladders. Unassisted light lifting and/or carrying of under 20 lbs. is required. May also include occasional unassisted lifting and/or carrying of up to 50 lbs., lifting and/or carrying over 50 lbs. must be assisted. Operation of a motor vehicle and/or airplane travel may be required. Travel needs are determined by the department supervisory staff based on business need, required skill base, and assigned job tasks and responsibilities. Travel may require the ability to visit project sites that are situated on a variety of developed and undeveloped terrain/locations. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, s ex, sexual orientation, gender identity, national origin, veteran or disability status. #J-18808-Ljbffr

Altera .# **Job Details:**### ## **Job Description:****About the Role:**For decades, Altera has been at the forefront of programmable logic technology. Our commitment to innovation has empowered countless customers to create groundbreaking solutions that have transformed industries.Join us in our journey to becoming the world's #1 FPGA company!Altera is seeking a **Senior Design Automation Engineer** to join our Design Methodology Automation and Infrastructure Team.The Design Methodology Automation and Infrastructure Team is responsible for building and maintaining the core automation infrastructure that supports Altera's FPGA design flows-from RTL to GDSII. In this senior role, you will drive the architecture, development, and optimization of highly automated, reliable, and scalable flow systems that enhance design productivity and accelerate development cycles for next-generation FPGA products. You will influence technical direction, mentor junior engineers, and collaborate closely with cross-functional teams to deliver world-class automation solutions.**Key Responsibilities:*** Architect next-generation unified FPGA/SoC design methodologies spanning Front-End, handoff to Backend, Design Verification, Design-For-Test (DFT), Design Data Management/Release flows, and FPGA-specific flows such as Design Intent and Configuration Management.* Develop and integrate state-of-the-art EDA solutions, including ML/AI-enhanced tools, flows, and methodologies-sourced externally or developed internally-to create sustainable, scalable automation solutions for multiple chip design programs.* Collaborate with design automation technical leads, design domain leads, and domain managers to define and drive new design automation architectures from concept through full production deployment across upcoming product programs.* Partner with EDA vendors to evaluate, explore, and extend tool capabilities that improve design quality, shorten turn-around time, and enhance design optimization.* Architect, develop, deploy, and maintain advanced design automation flows and methodologies for digital and/or analog design at scale.* Lead evaluation, integration, and enhancement of EDA tools, driving improvements in design productivity, efficiency, and quality across multiple design teams.* Design and implement robust automation frameworks that reduce manual effort, increase reproducibility, and improve overall design throughput.* Identify workflow bottlenecks across design, verification, CAD, and methodology teams and lead cross-functional initiatives to streamline FPGA design execution.* Provide deep technical expertise in scripting, tool customization, and flow development for advanced semiconductor design needs.* Drive continuous innovation in design automation infrastructure through adoption of new methodologies, technologies, and optimizations.* Collaborate with internal and external EDA vendors, owning issue resolution, feature requests, and deployment of next-generation capabilities.* Mentor and provide technical leadership to junior engineers within the Design Automation organization.#LI-MD1**Salary Range**The pay range below is for Bay Area California only. Actual salary may vary based on a number of factors including job location, job-related knowledge, skills, experiences, trainings, etc. We also offer incentive opportunities that reward employees based on individual and company performance.$142,600 - $206,500 USDWe use artificial intelligence to screen, assess, or select applicants for the position.### ## **Qualifications:****Minimum Qualifications:**Bachelor's or Master's in Computer Science, Electrical Engineering, or equivalent, with a minimum of 10 years of experience in IC Design or Design Automation and experience in the following:* Extensive experience with industry-standard EDA tools and hands-on expertise in design methodologies across multiple domains, such as Front-End Logic Design flows, Design Intent and FPGA-specific flows, Design Verification flows, and Design-for-Test (DFT) flows (with Back-End flow knowledge considered a plus).* Strong programming skills in Python, Tcl, C-shell, C, C++, or similar languages.* Familiarity with ML/AI applications and algorithms and their use in EDA or design methodology optimizations.* Proven leadership skills for driving collaborative, cross-functional projects, with strong communication and influencing abilities### ## **Job Type:**Regular### ## **Shift:**Shift 1 (United States of America)### ## **Primary Location:**San Jose, California, United States### ## **Additional Locations:**### ## **Posting Statement:**All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. #J-18808-Ljbffr

The Senior Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Senior Project Engineer will be reporting to the Project Manager and/or Superintendent. The Senior Project Engineer will supervise a team of skilled Project Engineer professionals who support departmental and organizational goals through their efforts. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs.Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 4+ years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities. Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

A leading technology company in San Jose, California is seeking a Physical Design Engineer to play a critical role in backend implementation for FPGA/SoC devices. You will be responsible for tasks such as floorplanning, PPA optimization, and collaboration with diverse teams. The ideal candidate will have a Bachelor's degree in Electrical Engineering and over 6 years of hands-on experience. Join us to help develop innovative technology solutions. #J-18808-Ljbffr

The Truckee area Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Project Engineer will be reporting to the Project Manager and/or Superintendent. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs. Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 3 years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

A tech company in the developer tools space is looking for strong product engineers to craft developer experiences and own the lifecycle of their product end to end. You will be part of a full-stack team, working on an early product while collaborating closely with a founder. Ideal candidates have experience in web infrastructure, front-end development using React, and strong communication skills. This role is based in downtown San Francisco and offers a dynamic working environment. #J-18808-Ljbffr

Speakeasy provides curated tools for agents and crafted sdks for developers. We started our journey by building the best in class tool chain for shipping and maintaining crafted SDKs for your APIs. We've now expanded our mandate to agentic tools and MCP by launching our second product, Gram. Gram is how you connect AI to data. Safely, securely and at scale with a streamlined developer experience. Gram makes it easy to deploy code and connect APIs to create agentic tools, curate them into toolsets and deploy them as hosted MCPs. Enterprises like LaunchDarkly, Fivetran and fast moving startups like Dub and Unkey are building and launching MCP tools and apps on Gram. We're a passionate team that loves to intuitive developer experiences to abstract hard problems. We have all kinds of customers from 2 person startups to fortune 500 companies relying on us. For Gram we're building in the open. The team is working at the cutting edge of agentic tool development tracking the MCP specification. Our goal is enabling AI builders where ever they are. Working at Speakeasy means enjoying the craft of creating robust toolchains and infrastructure for other developers and builders to rely on. Our team is made of ex-founders and domain experts across various tools, languages and infrastructure. The Role We're looking for strong product engineers who enjoy crafting developer experiences and owning lifecycle of development end to end - building, shipping, running support and measuring impact. We're a full-stack team that owns the complete product end to end. We have the agency to make changes to improve our customer's experiences and grow the business. You'll be working on an early product with a fast moving team and collaborating with a founder on a daily basis. Requirements Experience architecting and scaling modern web infrastructure. Experience building applications with a modern front-end Javascript framework such as React. Collaborate in person at our San Francisco downtown office. Strong product sense and experience driving product outcomes. Strong communication skills and a desire to partner with our customers sync and async in solving their problems. Bonus Experience with open source tech Experience working with the MCP protocol or agent infrastructure Experience building web services in Golang #J-18808-Ljbffr

PTS Advance is seeking an experienced MEP Mechanical Design Engineer to join our growing team. The ideal candidate will have a strong background in mechanical building systems design and proven expertise in Revit for modeling and documentation. You'll play a key role in developing HVAC, plumbing, and piping designs for commercial, industrial, and institutional projects. Key Responsibilities: Design and develop mechanical systems for building projects, including HVAC, plumbing, and piping. Create and coordinate 3D models and detailed construction documents using Revit. Collaborate with multidisciplinary teams, including architects, electrical engineers, and contractors. Perform load calculations, equipment selection, and system layouts. Ensure designs meet applicable codes, standards, and client specifications. Support project lifecycle from concept through construction administration. Qualifications: Bachelor's degree in Mechanical Engineering or related field. 10+ years of experience in MEP mechanical design (commercial or industrial preferred). Proficiency in Revit required. Strong understanding of mechanical building codes and standards. Excellent communication and teamwork skills. Professional Engineer (PE) license is a plus.

PTS Advance is seeking an experienced MEP Mechanical Design Engineer to join our growing team. The ideal candidate will have a strong background in mechanical building systems design and proven expertise in Revit for modeling and documentation. You'll play a key role in developing HVAC, plumbing, and piping designs for commercial, industrial, and institutional projects. Key Responsibilities: Design and develop mechanical systems for building projects, including HVAC, plumbing, and piping. Create and coordinate 3D models and detailed construction documents using Revit. Collaborate with multidisciplinary teams, including architects, electrical engineers, and contractors. Perform load calculations, equipment selection, and system layouts. Ensure designs meet applicable codes, standards, and client specifications. Support project lifecycle from concept through construction administration. Qualifications: Bachelor's degree in Mechanical Engineering or related field. 10+ years of experience in MEP mechanical design (commercial or industrial preferred). Proficiency in Revit required. Strong understanding of mechanical building codes and standards. Excellent communication and teamwork skills. Professional Engineer (PE) license is a plus.

Santa Ana, CA (Onsite) Direct Hire JPC - 19745 We are looking for a CRM Engineer. This is a direct hire opportunity based out of Santa Ana, CA (Onsite). We are seeking a Microsoft Dynamics 365 Architect with a strong background in design, architecture, as well as customizations & configurations. As a Microsoft Dynamics Architect, you will play a crucial role in designing, customizing, configuring, & optimizing the Microsoft Dynamics 365 Sales (v.9) platform to meet the unique business requirements of our team. You will work closely with the CRM project team, end-users, and stakeholders to understand their needs and implement effective solutions within the Microsoft Dynamics 365 ecosystem. Qualifications: Bachelor's degree or equivalent experience. 8+ years of experience with Microsoft Dynamics CRM/D365 CE/Sales. 3+ years in an architectural or senior technical leadership role. Strong understanding of Microsoft Dynamics 365 Sales (v.9), including configuration capabilities and features. Experience with Power Platform (Power Apps, Power Automate, Power BI, Dataverse). Proficiency in C#, JavaScript, FetchXML, and Web APIs. Strong experience with Azure services (Logic Apps, Functions, Service Bus). Excellent problem-solving and analytical skills, with the ability to troubleshoot issues and provide effective solutions. Strong communication and interpersonal skills to collaborate with cross-functional teams and stakeholders. Ability to work independently and manage time effectively, delivering high-quality results within deadlines. Preferred: Microsoft Certified: Dynamics 365 + Power Platform Solution Architect Expert. Experience with Agile/Scrum methodologies and DevOps practices. Responsibilities: Solution Architecture & Design Lead end-to-end solution design for Microsoft Dynamics 365 Sales, ensuring scalability, performance, and integration readiness. Define technical and functional architecture for new and existing implementations. Collaborate with business stakeholders to translate business needs into technical requirements. Platform Configuration & Customization Guide the implementation of standard and custom entities, workflows, plugins, Power Automate flows, and model-driven apps. Oversee the use of Dynamics 365 customization tools, including JavaScript, Power Apps, and Power Platform tools. Integration & Data Strategy Design integrations with other business systems (ERP, marketing, third-party platforms) using Azure services, APIs, and middleware tools. Define data migration, synchronization, and master data strategies. Governance & Best Practices Establish development standards, documentation practices, and governance frameworks. Promote consistency, code reusability, and security compliance across all CRM projects. Team Leadership & Mentorship Serve as a technical mentor for Dynamics developers and consultants. Collaborate with project managers, business analysts, and IT stakeholders to ensure delivery of high-quality solutions. Core Competencies: Strategic thinking and problem-solving ability. Excellent communication and stakeholder engagement skills. Strong documentation and technical presentation skills. Passion for continuous learning and innovation. Physical Requirements & Work Environment: This job operates in an office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. This may not be all-inclusive, and employees are expected to perform all other duties as assigned and/or directed by management. Job descriptions and duties may be modified when deemed appropriate by management. Annual Base Salary Range for CA, CO, IL, NJ, NY, WA, and DC: $115,000 to $140,000. Actual compensation offered may vary depending on factors including but not limited to, position offered, location, education, training, and/or experience. Solugenix will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act and Ordinance. Applicants do not need to disclose their criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if we are concerned about conviction that is directly related to the job, applicants will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. About the Client Our client is a leading North American distributor of building materials. About Solugenix Solugenix is a leader in IT services, delivering cutting-edge technology solutions, exceptional talent, and managed services to global enterprises. With extensive expertise in highly regulated and complex industries, we are a trusted partner for integrating advanced technologies with streamlined processes. Our solutions drive growth, foster innovation, and ensure compliance-providing clients with reliability and a strong competitive edge. Recognized as a 2024 Top Workplace, Solugenix is proud of its inclusive culture and unwavering commitment to excellence. Our recent expansion, with new offices in the Dominican Republic, Jakarta, and the Philippines, underscores our growing global presence and ability to offer world-class technology solutions. Partnering with Solugenix means more than just business-it means having a dedicated ally focused on your success in today's fast-evolving digital world.

A leading technology research organization in California seeks a machine learning engineer to develop foundational models for robotics. The role involves enhancing hardware infrastructure, building APIs for data handling, and designing evaluation metrics. Ideal candidates have hardware and communication protocol experience, along with strong software skills in Python and a passion for robotics. Competitive pay ranges from $176,000 to $264,000, with a comprehensive benefits package. #J-18808-Ljbffr

Senior Project Engineer | Allied Resources Technical Consultants Allied Resources is seeking a Senior Project Engineer to support a major public-works construction project in the Philadelphia area. The position offers a competitive compensation and benefits package including medical, dental, vision, 401k with company match, paid time off, disability coverage, parental leave, volunteer days, and more. Job Responsibilities: Support day-to-day project coordination on a large public-works or commercial construction project, working closely with project managers, superintendents, subcontractors, and design teams. Assist with developing and maintaining project schedules, tracking progress, and preparing updates for project leadership. Manage and organize project documentation including submittals, RFIs, change orders, meeting minutes, and daily reports. Perform quantity takeoffs, track material usage, and support cost control and forecasting efforts. Review drawings, specifications, and contract documents to identify issues, inconsistencies, or potential conflicts. Support procurement activities including scope reviews, vendor coordination, material tracking, and delivery schedules. Provide technical assistance to field teams, helping troubleshoot constructability concerns and support quality control efforts. Participate in site walks, coordination meetings, and inspections; assist with punch lists, project closeout, and turnover documentation. Collaborate with internal and external stakeholders to keep communication clear, accurate, and organized throughout all phases of the project. Contribute to the implementation of safety, quality, and operational best practices across the project. Qualifications: Bachelor's degree in Construction Management, Civil Engineering, Mechanical Engineering, Architecture, or a related field preferred; equivalent experience welcomed. 2+ years of experience working as a Project Engineer, Senior Project Engineer, or similar construction engineering role. Experience supporting commercial, institutional, industrial, or public-works construction projects. Ability to read and understand construction drawings, technical specifications, and contract documents. Strong organizational and communication skills with the ability to manage multiple tasks in a fast-paced environment. Familiarity with construction or project management software (such as Procore, Bluebeam, P6, or equivalent). Strong problem-solving abilities and attention to detail. Valid driver's license and reliable transportation required. EEO Policy: Allied Resources complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Allied Resources does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender identity and expression, disability, veteran status, or any other status protected by law.