Material handler/forklift operator jobs in Passaic, NJ

The Stores Operations Team is a hands-on group involved in all aspects of inventory management and warehouse logistics for Con Edison. The Stock Handler is responsible for receiving, organizing, and maintaining inventory, and in certain locations, the handling of waste products to support various internal customers. This role involves operating a variety of material handling equipmentincluding forklifts, pallet jacks, and other equipmentwithin both warehouse and yard environments to support the safe and efficient movement of materials and, in certain locations, waste products. Required Education/Experience High School Diploma/GED Preferred Education/Experience Customer Service. Experience in Supplying Materials. Experience handling and managing inventory. Relevant Work Experience Excellent oral and written communication skills, as well as math and reading skills. Capable of working with minimal supervision. Computer skills are required for utilizing the department's work and inventory management systems. Licenses and Certifications Driver's License Required Physical Demands Able to work in all weather conditions, i.e. excessive heat and/or cold Perform extended driving through heavy traffic and severe off-road conditions Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs Ability to work in adverse conditions that include, noise, confined spaces, and high elevations Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday Additional Physical Demands The selected candidate will be assigned a System Emergency Assignment (i.e., an emergency response role) and will be expected to work non-business hours during emergencies, which may include nights, weekends, and holidays. Selected candidates must be capable of pushing/pulling/lifting 40 pounds in weight. Be able to perform extensive walking/climbing/standing and must be capable of working in extreme weather conditions, in heavy traffic areas, in satellite locations as required, on elevated platforms, with exposure to ambient noise. Be medically qualified and may be required to be fit-tested. Be able to work various shifts, including weekends and holiday delivery operations. Core Responsibilities Follow safe work practices and procedures and perform various work assignments at each location as required. Provide customer service to crews, ordering and issuing material and receiving internal deliveries and packages. Use required storeroom computer applications to track material received, issue material to customers, manage inventory, and perform all aspects of storeroom administration, including using the Oracle system, CARS, DEMS, reel tracking, material ordering, etc., as required. Perform inventory counts and follow storeroom management procedures. Train to operate fork trucks within three months and other equipment up to 20 tons, e.g. track trucks, cable trucks, switcher, etc. (as required). Use manual and electric packaging equipment. Perform yard operations and spare part operations, including: picking, loading, measuring cable, tagging reels, inventories, coil cutting and fabrication, re-reeling, transformer operations, crane/rigging operation etc. Perform environmental administrative and manual work such as inspecting and maintaining storage areas, spill notification/clean up, manifesting waste on EMIS and logging drums in and out on tracking forms (hard copy and computer) and on computer tracking programs. Load and unload material or drums on to vehicles with lifting devices, which includes picking and packaging company and vendor materials. Make safety the first priority and identify any potential safety and environmental hazards. If you accept a job offer in association with this posting, you will be assigned to any of the operating areas of Stores Operations (Manhattan, Brooklyn, Queens, or the Bronx). Obtain certifications and CDL licenses as required by location.

Thank you for your interest in a career at Amerex. Our company stands as a global leader in fire suppression products, driven by our commitment to our team members, communities, and customers. We embrace individual differences and actively recruit team members from diverse backgrounds and skill sets, irrespective of race, gender, or ethnicity. At Amerex, we are dedicated to continuous collaboration and innovation, striving to remain leaders in our industry. Every position is rooted in a culture that aligns with eight guiding principles: Teamwork, Excellence, Communication, Leadership, Environment, Safety, Accountability, and Trust. These principles are the foundation of McWane, Inc. and serve as a compass, offering personal guidance to navigate daily work situations. Overview General warehouse duties including accepting shipments and shipping products by unloading, preparing, loading and verifying shipments. This position is full time, Monday - Friday 8:00 a.m. to 4:30 p.m. Responsibilities Internal communication with co-workers Shipment coordination and time management Operate forklift and material handling equipment. Outgoing order preparation - palletization of order contents, stretch wrapping, labeling and preparation of shipping documents including hazardous material identification Preparation of UPS shipments utilizing UPS Worldship software and Hazardous Material software Inventory receipt and verification Daily inventory cycle count verification General warehouse duties Qualifications High School or Equivalent-3 + years job related experience preferred Computer skills for proprietary database system, MS Word, MS Outlook, MS Excel (a plus, but not required) Forklift training/certification required 3+ years shipping and receiving experience preferred Maximum lifting requirement 50 pounds 98% Accuracy on inventory transactions DOT Training & Packing requirements Reach with hands and arms, stoop, kneel and crouch Regularly lift and move objects Awareness and strict compliance of required Health and Safety guidelines Wear Personal Protective Equipment (PPE) required Additional Information All your information will be kept confidential according to EEO guidelines. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

So why join Hologic? Our PURPOSE-to enable healthier lives everywhere, every day-is driven by a PASSION to become global champions for women's health. We succeed by fulfilling our PROMISE to bring The Science of Sure to life through product quality, clinical differentiation, customer relationships and our team's talent and engagement. What to Expect: Perform physical activities corresponding to the unloading, storage, picking, labeling, packaging, and shipping of materials. Perform repetitive assembly of the company's products into complete packages including, but not limited to, software, medical or pharmaceutical products, PC boards, accessories, manuals, operating instructions, and data sheets. May perform other packaging tasks including placing labels on packages, operating small production equipment, putting manuals into binders, counting and sorting various items, and forming or breaking down boxes for the final product. When applicable, maintains related records to comply with government standards. Expert in computer transactions/scans to receive, put away, transfer, kit, ship, or return materials, identifying and resolving problems in a timely manner. Count and record departmental Cycle Count results in accordance with the site Cycle Count process to maintain inventory accuracy; gathers and analyze information skillfully. Operate with expertise the material handling equipment (MHE) required to perform activities in a safe and efficient manner, identify risk situations and take proper preventive/corrective actions. What we Expect: Provide outstanding service in support of production operations as well as customer requirements. Work closely with Warehouse Supervisor and Logistics Manager to rectify problems, such as damages, shortages, or products that fail to meet company standards. Complete all training requirements in a timely manner and maintain accurate training records and certifications. Complete all necessary transactions independently and provide support to other associates as necessary. Attend, represent and present as department Subject Matter Expert in meetings and functions as called upon. Train peers as a Subject Matter Expert in one or more functional department core responsibilities. Education & Experience: High School or General Education Degree (GED), May have an Associate Degree 2 - 4 years of experience Experience with Oracle ERP system is beneficial. Experience with Agile Product Lifecycle Management system is beneficial. The annualized base salary range for this hourly role is $39,800 - $58,700 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency and Third Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans. #LI-PR1

JOB DESCRIPTION . Placement fee 15% of Annualized Salary. The primary objective of this position is support the Shipping and Receiving with the movement of materials and finished goods in order to ensure proper material flow to run the line efficiently. Principal Duties and Responsibilities: Operate lift truck in a safe, productive manner in accordance with all safety procedures Fill out daily checklist for forklift Fill LP tanks as needed following all safety procedure. Ensure proper color stenciling and UPC label wrappers are correct on product before being loaded on trucks. Record pallets on tally sheet as needed. Record pallet weight every 30 minutes on tally sheet if pallet weights is below specification, immediate notification to supervisor is necessary. Communicate with the production FLL and LTO is pallet count isnt correct Maintain housekeeping of forklift, shipping and receiving areas. Load and unload finished products and any related raw materials following proper procedures Knowledge of warehouse storage areas and location of all products including samples and accessory items Assist other plant personnel as needed Monitor inventories and turn over in timely manner Notify your supervisor immediately of any accident, near miss accident or on-the-job injury when it occurs no matter how insignificant it may seem Operate equipment only when you are trained in its use or are working with or under the direction of a qualified employee, and you are authorized to do so by your supervisor Wear proper personal protective equipment (PPE) at all times Perform other duties as assigned by leader SKILLS AND ABILITIES The employee should hold the following abilities: Good oral and written communication skills Ability to read, write and understand English Basic mathematics skills Some knowledge of all raw materials Knowledge of finished product Ability to work with truck drivers in a positive and courteous manner COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: Log into and navigate MyOC to access PeopleSoft for paycheck/benefits enrollment information Log into and navigate University (OCU) and accomplish required online training routinely EDUCATION AND/OR EXPERIENCE The employee should have the following: High School Diploma or GED equivalency Completed and passed lift truck training programs and have a valid fork lift operator license ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: Ability to routinely lift up to 40 lbs without assistance Ability to routinely lift up to 80 lbs with assistance Work for up to 8 hours in extreme hot/cold manufacturing environment Operate/sit/drive for up to 8 hours continuously. Routinely ascend and descend stairs and forklift to enter work areas Safeguard self with Personal Protective Equipment (PPE) steel toed shoes, ear plugs, eye protection (glasses, goggles, and/or facemask) as necessary for task Push/drive floor sweeping and cleaning equipment or tools as necessary for housekeeping duties. Ability to rotate or work overtime as necessary

How would you like to work with "people who make it right?" We are the #1 coffee filter manufacturer in North America and we are located right here in Northern New Jersey! As a Material Handler, you'll play a key role in supporting our production team by safely and efficiently operating manual pallet jacks and other material handling equipment. You'll ensure raw materials are delivered to workstations on time, manage pallets, and help maintain a smooth production flow. Key Responsibilities: Operate manual pallet jacks and other equipment safely. Supply raw materials (boxes, bags) to production lines. Place empty pallets on the line and remove completed pallets to the warehouse. Shrink wrap and label pallets with proper documentation. Maintain accurate pallet counts and configurations. Use personal protective equipment (PPE) as assigned. Assist with rework area setup and conveyor adjustments. Stamp and stack boxes for production use. Communicate with leads to ensure proper line setup. Benefits: Immediate Vacation - Vacation time is prorated based on your month of hire and available from day one. Paid Sick Leave - Up to 40 hours of paid sick time per year, prorated according to your start date. Competitive Compensation - Pay is based on your skills and experience. Comprehensive Benefits Package, including: Medical, Dental, Vision, and Prescription coverage Life and Disability Insurance 401 (k) with Company Match Health Savings Account (HSA) and Flexible Spending Account (FSA) options Fitness Reimbursement Program Education Reimbursement Paid Holidays and more Compensation: Hourly Rate: Starting at $16.30

FRAUD ALERT: Please note that DSV will never request a chat interview or solicit funds from applicants or employees through its interviewing and hiring process. We do not require any form of payment and will not ask for personal financial information, such as credit card or bank account number. Our recruiters have an @dsv.com or @us.dsv.com email address. If you question the legitimacy of any DSV job posting, please reach out to *************. DSV - Global transport and logistics In 1976, ten independent hauliers joined forces and founded DSV in Denmark. Since then, DSV has evolved to become the world's 3rd largest supplier of global solutions within transport and logistics. Today, we add value to our customers' entire supply chain by transporting, storing, packaging, re-packaging, processing and clearing all types of goods. We work every day from our many offices in more than 80 countries to ensure a steady supply of goods to production lines, outlets, stores and consumers all over the world. Our reach is global yet our presence is local and close to our customers. Read more at *********** Location: USA - Plainfield, 2363 East Perry Road Division: Air & Sea Job Posting Title: Warehouse Operators Time Type: Full Time Create, coordinate and complete shipments of goods between company and clients. Coordinate with off-site logistics locations, suppliers and vendors to meet deadlines and track all shipments. Process orders and ensure shipment schedules are met. May develop and maintain operational reports and complete shipments of goods between company and clients. May act as a point of contact for customer service. Ensures the completion, accuracy, and delivery of transactions for clients. May dispatch requests to transportation providers. Duties and Responsibilities Performs daily activities for an assigned shift or within an assigned area or function. Adheres to specific warehouse work instructions for receiving, labeling, storing, shipping and value add services as required in accordance to DSV Air & Sea standard policies and procedures. Meets company objectives in the areas of performance, safety, quality, leadership, and customer service. Works with the supervisor, warehouse manager and freight forwarding teams to identify areas to improve/enhance overall service to the client. Unloads inbound shipments safely and move products to the correct destination. Efficiently stage, stack and load the merchandise in the appropriate areas Efficiently moves product from staging and/or unloading areas into the correct load door and the assigned trailer. Ensures that the trailer is secured and chocked prior to entering the trailer in accordance to the safety polices. Loads/Unloads product correctly using the appropriate handling techniques. Segregate, check, and stage inbound product correctly. Verifies the driver, trailer, and bills are all for that specific carrier and location. Counts freight with the driver and ensures all requirements are followed. Loads the trailer for safe transit and ensures the driver signs all required paperwork. Performs all Forklift activities as required. Perform labeling, sorting, wrapping, packing, and repacking as needed; maintain the facility to provide a clean, safe work environment. Maintains and organized and orderly desk/office area. Performs other duties as assigned Educational background / Work experience Must have forklift experience Skills & Competencies Mathematical Skills Basic level required with the ability to verify inventory, order accuracy, and other quality driven initiatives. Other Skills Ability to work with minimal supervision Detail oriented, organized and able to effectively manage multiple priorities Effective interpersonal skills and ability to communication orally and in writing High level of customer service skills Function / Market & Industry Knowledge / Business Acumen / Processes Preferred Qualifications Minimum 3 years of relevant work experience in customer service and logistics (will consider an equivalent combination of education and/or experience). Material Handling Certification Dangerous Goods Qualification Forklift Operation and Certification Some experience with Warehouse Management Systems Language skills English preferred (reading, writing and verbal) Computer Literacy Proficiency in basic MS Office applications. Physical and/or Mental Requirements / Working Conditions Must be able to lift, bend, stoop, reach, and climb. Must be able to lift up to 40 pounds. Must be able to operate material handling equipment. Must be able to stand for several hours per day to perform required job duties as required by the nature of the business that is supported. Working conditions are normal for a warehouse environment with exposure to changing warehouse temperatures. While performing the duties of this job, the employee rarely is exposed to fumes or airborne particles, toxic or caustic chemicals. The noise level in the work environment is usually low to moderate. The physical demands and work environment characteristics described above are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. At Will Employment DSV Air & Sea Inc. employees are hired for an undefined period of time as “at will” employees. This means that an employee may be terminated for any reason, or no reason at all, at any time, provided the discharge does not violate any law*. Additionally, each employee has the right to terminate his/her employment at any time. *Except if employed in Montana, where termination requires just cause. For this position, the expected base pay is: $16.50 - $24.80 / Hourly. Actual base compensation will be determined based on various factors including job-related knowledge, geographical location, skills, experience, and other objective business considerations. DSV does not accept unsolicited agency resumes. Please do not forward unsolicited resumes to our website, employees, or Human Resources. DSV will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of DSV and will be processed accordingly without fees DSV is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, disability, veteran status, marital status, gender identity, sexual orientation, national origin, or any other characteristic protected by applicable federal, state or local law. If you require special assistance or accommodation while seeking employment with DSV, please contact Human Resources at *************. If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. DSV reserves the right to defer or close a vacancy at any time. DSV - Global transport and logistics Working at DSV means playing in a different league. As a global leader in transport and logistics, we have been on an extraordinary journey of growth. Let's grow together as we continue to innovate, digitalise and build on our achievements. With close to 160,000 colleagues in over 90 countries, we work every day to offer solid services and meet our customers' needs and help them achieve their goals. We know that the best way to achieve this is by bringing in new talent, fresh perspectives and ambitious individuals like you. At DSV, performance is in our DNA. We don't just work - we aim to shape the future of logistics. This ambition fuels a dynamic environment built on collaboration with world-class team players, accountability and action. We value inclusivity, embrace different cultures and respect the dignity and rights of every individual. If you want to make an impact, be trusted by customers and grow your career in a forward-thinking company - this is the place to be. Start here. Go anywhere Visit dsv.com and follow us on LinkedIn and Facebook.

Stratas Foods LLC is the leading supplier of fats and oils to the Foodservice, Food Ingredients and Retail Private Label markets in North America and is a producer of quality bulk and packaged dressings, mayonnaise and sauces. Stratas Foods was formed in October 2008 as a 50/50 joint venture between ACH Food Companies (ACH) and Archer Daniels Midland (ADM). Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The forklift operator will be driving electric powered stand up industrial truck equipped with lifting devices such as forklift to push, pull, lift, stack, tier, or move products, equipment, or materials. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Company procedures and policies. Responsibilities: \tMove levers and press pedals to drive truck and control movement of the lifting apparatus. \tPosition forks under loaded pallets, skids, boxes, products, or materials and transport load to designated area. \tUnload and stack material by raising and lowering lifting devices. \tFollow GMPs and safety guidelines. \tPick customer orders as required. \tInventory material on work floor, and supply workers with materials as needed. \tInspect trailers prior to loading and unloading product. Document onto proper form. \tLoad and unload trucks and trailers. \tLoad and unload materials onto or off of pallets, skids or lifting devices. \tInspect truck daily and fill out operational checklists, recharge batteries. Qualifications Education: High School Diploma or equivalent Related Experience: 1-2 years of previous related experience driving a forklift Compensation: $20.00 Schedule: 2nd Shift 3PM - 11:30PM with the possibility of overtime Applicant must consent to a pre-employment drug screening, lift test (ability to lift 50 pounds) and physical evaluation. Additional Information Physical: Must be able to lift 50 pounds, climb stairs, lift, bend, kneel, stand for long periods of time, work in confined spaces, and work with heights. Sensory: Must have the appropriate level of sensory acuity (visual, hearing, speaking, smell and touch) to be able to identify and react to normal, abnormal and alarm conditions (chemicals, temperature, etc.) Mental/Reasoning: Must be able to logically and methodically work through and break down complex problems and processes to enable effective communication with all levels of the organization. Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, sexual orientation, military/veteran status, and any other legally protected status. Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, sexual orientation, military/veteran status, and any other legally protected status. Position Responsibilities: 100.00% - Perform functions in the assigned department such as Picking, Putaway or material movement areas as required. Work with DC leads and clerks to ensure the completion of all assigned tasks. Perform detailed tasks with minimal errors. Ability to achieve established productivity standards. Work safely and contribute to a positive work environment. Provide exceptional service to both internal and external customers through quality of work. Ensure that freight is scanned and moved to the correct destination. Keep work area safe and clean according to general warehousing practice and OSHA requirements. Will move to the work as necessary. Physical Requirements: Comfortable walking/standing 90% of the day. Heavy lifting up to 65 pounds

Requisition ID 60798 Position Type (US) Full Time Workplace Arrangement About Kerry Kerry is the world's leading taste and nutrition company for the food, beverage and pharmaceutical industries. Every day we partner with customers to create healthier, tastier and more sustainable products that are consumed by billions of people across the world. Our vision is to be our customers' most valued partner, creating a world of sustainable nutrition. A career with Kerry offers you an opportunity to shape the future of food while providing you opportunities to explore and grow in a truly global environment. About the role Our Clark location is part of our Taste Division, producing flavors and ingredients. Our Clark facility is unique in the sense they have two buildings. The North building has a fruitier smell to it, the teams in that building are producing natural flavoring and essential oils. The South building is the complete opposite, it will have savory and garlic smells because the team is producing seasonings for meat, chicken broth, and beef gravy. 220 Terminal Ave, Clark, NJ 07066 (South Building) Shift 2nd Monday to Friday 11am - 7pm Key responsibilities Warehouse Operative * Responsible for the loading/unloading of inbound and Outbound freight in accordance to site rules and operating procedures. Systematic processing of freight as well as physical handling of materials. * Accurately release the proper freight and follow the loading instructions on the bills of lading. * Inspects documents, vehicles, and freight on inbound/outbound deliveries. * Process post goods issue/inbound delivery on shipments after loading/unloading using SAP System * Unloads inbound freight and inspects for vendor non-conformance's * Moves and arranges inventory as instructed for organization, stock rotation and efficiency using RF scanners. * Maintain a clean and safe working environment and follow good safety practices as directed by safety teachings. * Maintain GMP's and complete functions listed on the sanitation schedule. * Proper handling of Allergen products and equipment according to Allergen Control Procedures * Safely operate Forklift Equipment and machinery as specified in zero tolerance policy * Other duties assigned by supervisor/manager. Qualifications and skills Minimum Requirements High School or equivalent. Must be able to proficiently operate forklifts and other equipment integral to the job functions. Some basic computer skills. Basic math skills, capable of reading and writing in English. Must have good communication skills both verbal and written. Physical Requirements Must be able to lift up to 50 lbs. Must be agile and can bend to lower heights. Must be able to see and distinguish between labels. Must be able to stand for long periods of time and walk through the warehouse. Working Environment Ambient factory environment with exposure to flavor and basic product chemicals, raw materials and finished goods. Compensation The pay range for this position is $17.34 - $27.56 per hour. Kerry typically does not hire an individual at the top or near the top of the range, as we are a pay-for-performance company, and this range is set to continue to reward performance annually while in role. Compensation decisions are dependent on the facts and circumstances of each case. The specific compensation offered to a candidate within the above range may be influenced by a variety of factors including skills, qualifications, experience, and internal equity. Kerry offers a competitive benefits package, including medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, Employee Share Plan, Life, disability, and accident insurance, and tuition reimbursement. This job posting is anticipated to expire on 1/31/2026. Kerry is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age disability, protected veteran status or other characteristics protected by law. Kerry will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditional upon the successful completion of a background investigation and drug screen. Additional information can be found at Know Your Rights Workplace Discrimination is Illegal (dol.gov). Beware of scams online or from individuals claiming to represent us. A Kerry employee will not solicit candidates through a non-Kerry email address or phone number. In addition, Kerry does not currently utilise video chat rooms (e.g., Google Hangouts) to conduct interviews. Refuse any request that asks you to provide payment to participate in the hiring process (e.g., purchasing a "starter kit," investing in training, or something similar). Kerry will not ask you to pay any money at any point in the hiring process with the exception of reimbursable travel expenses. In addition, any payments made by Kerry will be from official firm accounts bearing the Kerry name. Recruiter Posting Type DNI

Dock Workers are responsible for loading and unloading trailers for the purpose of transporting a wide variety of cargo, moving cargo, driving a forklift, or using a pallet jack or other freight for transit. Effectively and efficiently operating mobile technology and completing all required paperwork. Responsibilities * Effectively operate mobile technology. * Load and unload trailers for the purpose of transporting a wide variety of cargo. * Actual duties and schedule may vary depending on terminal location. * Equipment - Preventive Maintenance Program for all ABF equipment. * Move cargo, drive a forklift or use a pallet jack or other freight handling equipment. * Prepare wide varieties of freight for transit. * Complete all required paperwork. Requirements Additional Requirements: * This is a casual position and employee must be willing to work evenings, weekends, and on an as-needed basis. * Minimum 18 years of age. * Have a stable work record. * Have a good safety record. * Be able to pass pre-employment drug screen and post-offer company physical. * Shift days and hours required for this position vary by location and may include days, nights, and/or weekends. Being able to work the required hours at this location will be considered a minimum requirement. Other Details Work Hours: * Schedule may vary depending on Service Center location. Travel Requirements: * Minimal (0%-25%) Compensation: * This is a hourly position paid weekly. In accordance with the New Jersey Pay Transparency Act, the pay for this position is $18.00 per hour. About Us ABF Freight , an ArcBest company, is one of the nation's largest, most trusted less-than-truckload carriers. With over a century of experience, 240 service centers spanning North America, and an unwavering commitment to quality, safety and customer service, ABF offers best-in-class LTL transportation for companies of all sizes and industries. We're driven for excellence. An Equal Opportunity Employer including Vet/Disability

Pay rate range: $15/hr on W2 all inc. Duration: 12 months Job Title: Material Handler The Material Handler position requires individuals to assemble components, read and follow instructions, label wires, and inspect final products, ensuring adherence to safety practices and quality standards. Additional responsibilities include using testing equipment, maintaining a clean working area, and accurately handling, labeling, and sorting cables. Strong communication skills are essential for effective interaction with team members, QC associates, and department leaders. Computer skills, data entry, and documentation skills are highly valued. Responsibilities: Assembling components Reading and following instructions Labeling wires Inspecting final products Adhering to safety practices Using testing equipment Keeping the working area clean Handling, labeling, and sorting cables Maintaining high attention to detail Communicating effectively with team members, QC associates, and department leaders Lifting up to 50 lbs Bending and standing as needed for tasks Skills: Circuit Board Assembling Electronic Assembling Line Work Parts Assembling Soldering Packaging Sorting Coding/Batching Computer skills Data entry Lifting up to 50 LBS for the duration of the shift Requires the ability to perform normal job functions (bend, twist, pull and stand) Additional Notes Shifts: 8: 00 AM-4: 30 PM Mon-Fri Responsibilities may change based on the projects received Work location is at the 10 Enterprise location.

Job Responsibilities o Pick production materials identified on Kanban cards from designated Markets in an accurate and timely manner. o Safely operate an electric tugger to deliver production material to assigned production lines in a timely and efficient way. o Load required materials, including Purchased Goods, Work in Process Containers, Finished Goods Pallets, and Scrap Bins onto the Tugger and transport to the indicated areas and unload the materials in an accurate and timely manner. o Maintain KANBAN areas; straightening up component inventory and ensuring everything is in the correct place. o Ensure finished good skids are properly stacked, production form is filled out and delivered to a designated department. o Review inventory daily and established minimum quantity levels; record on track sheet items to be ordered. o Maintain all Kanban cards and notify leadership when an issue is identified. o Communicate continuous improvement opportunities to leadership. o Document all requests for components to be delivered to lines. o Assist Senior Supervisor - Material Control in inventory audit counts and inputting production as needed. o Maintain work area clean of debris by performing proper housekeeping on a regular basis. o Follow all general safety regulations, use provided safety equipment as required. o Perform all other duties assigned by the Senior Supervisor - Material Control. Job Requirements/Qualifications o A High school diploma, GED or equivalent is preferred. o Bilingual preferred (English/Spanish); verbal and written skills. o Ability to lift a maximum forty pounds. o Frequent walking, bending, reaching, and pushing repetitively. o Ability to operate a Tugger/Forklift. Forklift certification is required (will go through Arrow Certification process as needed) o Ability to compute basic math problems including addition, subtraction, multiplication, and division. o Must be detail orientated and demonstrate strong organizational skills. o Effective communication skills while working with department teammates and all level Supervisors. o Excellent time management skills and ability to prioritize tasks. o Previous experience with inventory management is a plus. o Must be available to work Overtime as needed. Benefits and Compensation Arrow Tool Group, through our Collective Bargaining Agreement with the UFCW Local 312 offers a range of benefits to meet our teammates' needs, based on eligibility. These benefits include, but are not limited to: Comprehensive healthcare insurance Company paid dental and vision coverage through the UFCW Basic Life/AD&D Insurance Employee Assistance Programs Participation in a multi-employer Pension Plan through the UFCW Paid Time Off Benefits including Vacation, Sick, 11 Company Paid Holidays and Bereavement Additional details about these benefits will be provided during the hiring process. The formal language of the collective bargaining agreement and plan documents govern the above offerings. Plan documents, if applicable, are available for teammate's inspection. The Company and its designated benefit plan administrators reserve the right to determine eligibility, interpretation and administration of issues related to benefits offered by the Company. Starting rate: $17/hour #LI-DNI

Thank you for your interest in becoming part of the team at Legrand! GENERAL PURPOSE This position is responsible for safely operating various machining, production, and assembly operations to produce high quality manufactured parts or assembled production. Also, this position will have the ability to set up or make minor adjustments to various machines. DUTIES AND ACCOUNTABILITIES Correctly setup and operate various machines, follow the production and quality procedures following prints and checking materials for defects, maintain production materials, inspect product to ensure high quality. Able to run various different types of equipment. Perform minor adjustments and daily maintenance to equipment Participate on Continuous Improvement Teams Provide training to other associates Basic or routine troubleshooting Able to operator material handling equipment: (Forklift, Stand Behinds, Trucks) Ability to work with minimal supervision Conduct machine and production changeovers as required Certified to operate various workstations/positions within the facility to meet production needs Inspect measurements and product to ensure quality and accuracy Transport the product to the correct location when completed Update all completed work in the correct system per the schedule Ability to understand and execute verbal instructions regarding duties to be performed Ability to perform and demonstrate all manufacturing procedures after training. Assist with other duties within the department and/or other work stations/departments when necessary Complete clean-up responsibilities and maintain work station according to 5S procedure Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in safety programs, initiatives, and investigations JOB REQUIREMENTS Essential Knowledge, Skills and Abilities Required: Ability to read, write and speak English fluently Demonstrated ability to use and interpret measurement tools such as tape measure, micrometers and calipers Ability to read and interpret assembly drawings, blueprints, BOM's and associated procedures Ability to follow directions and work with minimal supervision Flexibility and willingness to adapt to frequently changing priorities/tasks Demonstrated mechanical aptitude Basic math skills and problem solving skills Ability to operate some or all of the following types of equipment: Presses, Laser Turret, Welder, Table Saws, Edgers, Paint Sprayers, Mills and other Manufacturing Equipment as needed Ability to identify and communicate basic process improvements Must possess high level of attention to detail Works well in a Team Environment Capability to Train others Ability to work well in a team environment Provide training to other associates The ability to make decisions on imperfect information The ability to multitask and bias towards actions Proven reliability - attendance and punctuality Must understand basic lean principles - 5S, Kanban Ability to use the following hand tools: drills, screw drivers, hammers, etc. Minimum Education and Experience Required: Must have a minimum of a high school diploma or GED. Two years of previous experience in operating specific specialized equipment outside of Milestone or two years of demonstrated experience operating a variety of different types of machinery. WORKING CONDITIONS/PHYSICAL DEMANDS While performing the duties of this job, the employee is required to stand for 8 hours/day while making coordinated movements of the hands and fingers to grasp/pinch, and manipulate objects. This may include frequent use of vibrating/pneumatic tools, overhead and outstretched reaching with arms, bending/twisting/stooping, kneeling/squatting and frequently lifting/carrying up to 70 lbs. throughout the day and occasionally up to 75lbs as needed. Also may occasionally include pushing/pulling up to 100 lbs. May occasionally be exposed to dust and spray fumes. Regular shop assembly/distribution center environment (no air conditioning) Steel-toed shoes are required for working in this position. Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Milestone is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. If you'd like to work in a fun, creative, business-casual environment that offers a comprehensive benefit package, we encourage you to apply! Legrand is an equal employment opportunity employer. For California residents, please see the link for the Privacy Notice for Candidates. California law requires that we provide you this notice about the collection and use of your personal Information.

Your Job Job Specific intro paragraph Our Team 1-3 sentences to describe the team/division this role will be working in What You Will Do Bulleted list of engaging responsibilities Not a task list Who You Are (Basic Qualifications) 4-5 bulleted, objective, non-comparable requirements are recommended What Will Put You Ahead Bulleted list of preferred qualifications; Optional section At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Who We Are {Insert company language from Company Boilerplate Language Guide } At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Who we are For more than 40 years, Reworld has been a leader in sustainable waste solutions, providing our customers with innovative solutions that help them achieve carbon-negative outcomes. Our Vision Reworld is leading the charge to a carbon-negative future through revolutionary sustainable materials management solutions that reduce, reuse, recycle and reimagine waste for the benefit of society and the environment. Our Business Reworld partners with businesses by offering cutting-edge engineering and innovative solutions, to help customers reduce, reuse, recycle and recover value from waste streams and meet or exceed their sustainability goals. Our Value Reworld's differentiator comes from our ecosystem of technology, facilities and partnerships, trusted by the world's largest organizations to reimagine waste management for a smarter, more sustainable world. All that we're missing is you. Apply today! About the role The Loader Operator will operate front-end loaders, roll-off trucks, forklifts and other heavy equipment to push waste into the tipping pit, separate and load non-processable materials from tipping floors or pits, and transports material to various other facility buildings from the tip floor and metal storage areas. This individual will load ash into trucks from the ash building, unders/primary/secondary soils from designated storage areas, biomass material from designated building, belt and floor rejects from RTI, and ferrous processed by DMR from west bunker. This candidate will communicate with traffic control operator on tipping floor to maintain steady flow of traffic and provide code numbers of loaded material to truck drivers removing material from the site. This will include providing Reworld hauling tickets to driver prior to leaving the scale house. Performing safety and operational inspections as well as small preventive maintenance procedures daily, including pressure cleaning of the equipment assigned to this position; completing PM sheets and work orders as required. Refuels equipment when required and replenishes fluids including pollution control and regeneration equipment. Reporting unsafe conditions, accidents, or equipment malfunctions to the Operations supervisor is a requirement. This individual should be knowledgeable of the correct DOT weight requirements for OTR trucks as well as safety procedures and pre-caution for working around tipping floors and large amounts of traffic. Familiar with hazardous material, safety and environmental policies as well as spill prevention measures. Familiar with GHS (MSDS) requirements for all material pertaining to heavy equipment operations. Position Requirements: High School graduate or general education degree (GED) Six months to one year related experience and/or training in similar situation. Experienced in operating heavy equipment such as front-end loader, roll-off truck and forklift with some mechanical competency. Internal candidates must have completed qualification standards for prior position in company's line of progression. Physical Demands of the Role: Ability to walk, stand, sit, and climb Ability to lift/carry 50lbs Ability to work from heights and in confined spaces Qualify to wear a full-face respirator Consistently work in various weather conditions Total Rewards & Compensation: Competitive Base Salary Day one employee benefits: competitive health insurance options, PTO, retirement savings plan and 401K match The pay range for the primary location of this position is: $26.57-$35.86 All Reworld positions require a candidate's ability to perform the duties and responsibilities of the role while upholding Reworld's Values, including (but not limited to) contributing to a safe and inclusive workplace, delivering results through trust, and building breakthrough capabilities. Please note that Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. Our DEI Commitment Reworld is an Equal Opportunity Employer, has developed an Affirmative Action Program (AAP), and will not discriminate against any qualified applicants because of race, color, religion, sex, national origin, sexual orientation, gender identity, disability (including perceived disability, physical, mental, and/or intellectual disabilities), veteran status, liability for service in the Armed Forces of the United States, or any other characteristic protected by law. Know Your Rights (Click to view poster) If you are an individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site because of your disability. You can request reasonable accommodations by going to Reworldwaste.com and clicking on the ‘Contact Us' button. Under Inquires, select ‘Careers' in the Interest field, fill out all required fields including your message. In the message section, please note this is a ‘Job Application Accommodation Request'. Attention Staffing Agencies & Search Firms Reworld may sometimes selectively collaborate with staffing agencies and search firms (Agencies). Reworld will only consider candidates from Agencies with whom a signed agreement and a duly authorized work order (for a specific role) has been duly executed. Any unsolicited candidate submissions or candidate submissions from Agencies that do not meet these criteria, will be deemed invalid and ineligible for any fees.

Who we are For more than 40 years, Reworld has been a leader in sustainable waste solutions, providing our customers with innovative solutions that help them achieve carbon-negative outcomes. Our Vision Reworld is leading the charge to a carbon-negative future through revolutionary sustainable materials management solutions that reduce, reuse, recycle and reimagine waste for the benefit of society and the environment. Our Business Reworld partners with businesses by offering cutting-edge engineering and innovative solutions, to help customers reduce, reuse, recycle and recover value from waste streams and meet or exceed their sustainability goals. Our Value Reworld's differentiator comes from our ecosystem of technology, facilities and partnerships, trusted by the world's largest organizations to reimagine waste management for a smarter, more sustainable world. All that we're missing is you. Apply today! About the role The Loader Operator will operate front-end loaders, roll-off trucks, forklifts and other heavy equipment to push waste into the tipping pit, separate and load non-processable materials from tipping floors or pits, and transports material to various other facility buildings from the tip floor and metal storage areas. This individual will load ash into trucks from the ash building, unders/primary/secondary soils from designated storage areas, biomass material from designated building, belt and floor rejects from RTI, and ferrous processed by DMR from west bunker. This candidate will communicate with traffic control operator on tipping floor to maintain steady flow of traffic and provide code numbers of loaded material to truck drivers removing material from the site. This will include providing Reworld hauling tickets to driver prior to leaving the scale house. Performing safety and operational inspections as well as small preventive maintenance procedures daily, including pressure cleaning of the equipment assigned to this position; completing PM sheets and work orders as required. Refuels equipment when required and replenishes fluids including pollution control and regeneration equipment. Reporting unsafe conditions, accidents, or equipment malfunctions to the Operations supervisor is a requirement. This individual should be knowledgeable of the correct DOT weight requirements for OTR trucks as well as safety procedures and pre-caution for working around tipping floors and large amounts of traffic. Familiar with hazardous material, safety and environmental policies as well as spill prevention measures. Familiar with GHS (MSDS) requirements for all material pertaining to heavy equipment operations. Position Requirements: High School graduate or general education degree (GED) Six months to one year related experience and/or training in similar situation. Experienced in operating heavy equipment such as front-end loader, roll-off truck and forklift with some mechanical competency. Internal candidates must have completed qualification standards for prior position in company's line of progression. Physical Demands of the Role: Ability to walk, stand, sit, and climb Ability to lift/carry 50lbs Ability to work from heights and in confined spaces Qualify to wear a full-face respirator Consistently work in various weather conditions Total Rewards & Compensation: Competitive Base Salary Day one employee benefits: competitive health insurance options, PTO, retirement savings plan and 401K match The pay range for the primary location of this position is: $26.57-$35.86 All Reworld positions require a candidate's ability to perform the duties and responsibilities of the role while upholding Reworld's Values, including (but not limited to) contributing to a safe and inclusive workplace, delivering results through trust, and building breakthrough capabilities. Please note that Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. Our DEI Commitment Reworld is an Equal Opportunity Employer, has developed an Affirmative Action Program (AAP), and will not discriminate against any qualified applicants because of race, color, religion, sex, national origin, sexual orientation, gender identity, disability (including perceived disability, physical, mental, and/or intellectual disabilities), veteran status, liability for service in the Armed Forces of the United States, or any other characteristic protected by law. Know Your Rights (Click to view poster) If you are an individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site because of your disability. You can request reasonable accommodations by going to Reworldwaste.com and clicking on the ‘Contact Us' button. Under Inquires, select ‘Careers' in the Interest field, fill out all required fields including your message. In the message section, please note this is a ‘Job Application Accommodation Request'. Attention Staffing Agencies & Search Firms Reworld may sometimes selectively collaborate with staffing agencies and search firms (Agencies). Reworld will only consider candidates from Agencies with whom a signed agreement and a duly authorized work order (for a specific role) has been duly executed. Any unsolicited candidate submissions or candidate submissions from Agencies that do not meet these criteria, will be deemed invalid and ineligible for any fees.

Job Description Job Title Warehouse Operator (Full Time) About Porcelanosa Porcelanosa is firmly positioned at the forefront of the Spanish and international markets thanks not only to our solid values of innovation and quality, but also the trust placed in our large team, made up of almost 5000 skilled professionals, and our commitment to the environment and stakeholders. Porcelanosa products are designed with people in mind, intended to make their lives better and feature the finest state-of-the-art innovations. Boasting over 45 years of experience, Porcelanosa is present in more than 150 countries around the world. Our success is based on a unique business model, built on a solid corporate strategy. Why Work for Porcelanosa? At Porcelanosa, precision, reliability, and excellence are at the core of everything we do-including our distribution operations. As a Warehouse Operator, you'll play a key role in managing the movement and storage of goods to ensure accurate inventory control, efficient order fulfillment, and smooth warehouse operations. If you're detail-oriented, organized, and eager to grow your career in a fast-paced, collaborative environment, this role offers the perfect opportunity. Join us and become part of a mission-driven team that values integrity, innovation, and continuous improvement. What We Offer Competitive Compensation - Base salary plus commission opportunities 100% 401K match up to 4% 3-tier medical insurance 2-tier dental insurance Vision insurance Health Savings Account Flexible Spending Accounts Short Term and Long-Term Disability Employer-paid life insurance Voluntary Employee, Spouse and Child Life Insurance Critical Illness, Hospital Indemnity and Accident Insurance $3,000 Tuition Reimbursement Paid Time Off (PTO) Key Responsibilities Use forklift to load, unload, move and stack products. Receives, unpacks, packs, and ships materials and products. Counts and checks items and prepares reports as necessary. Operates forklift or similar material handling equipment. Unloads inbound shipments from trailers and loads outbound shipments on trailers. Loads outbound shipments on local delivery trucks according to delivery route or on customers' trucks. Stacks and takes down pallets in storage areas. Moves, stores, organizes and reorganizes a variety of material and products as directed. Use hands, hand trucks, pallet jacks or similar non-powered equipment to move materials. Reports inventory discrepancies, stocks shortages, and incomplete orders. Prepares, packs, and labels for products for shipment using protective wrapping, boxes, pallets, and crates. Identifies fragile material or poorly packaged material and may construct non-standard packing or reinforcing to ensure products protection from damage. Verifies and double checks picked product against packing slip to ensure item and quantity accuracy and inclusion of all items. Applies shipping labels, bills-of-lading, and packing lists. Maintains and organizes warehouse as directed Participate and assist in the physical counts of inventory as required. Other duties as assigned. What You Bring to the Team Requires at least 3 months of relevant experience. Forklift operation certification preferred. Valid driver's license. Basic PC skills for inputting and processing shipments and entering pulled order data into inventory/order processing system. Must adhere to good safety practices and rules and exhibit common sense. Requires ability to read and write English at a basic level. Experience with various types of equipment Commitment to Inclusion Porcelanosa provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. At Porcelanosa, we believe in a skills-first approach to recruitment and employment. This means focusing on what you can do and how you can grow, rather than traditional metrics alone. We are committed to adhering to anti-exclusion practices, removing barriers to access, and enhancing opportunities for all individuals based on merit and potential. Your skills, experience, and perspective are valuable-and we want to empower you to make your mark here with us. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, walk, bend, and lift for extended periods while performing warehouse tasks. Physical strength and stamina to lift, carry, push, or pull materials and products (typically up to 50-75 lbs). Manual dexterity and hand-eye coordination to operate warehouse equipment, such as forklifts, pallet jacks, and scanners. Visual acuity to read labels, inventory lists, and shipping documents accurately. Mobility to move safely throughout warehouse and storage areas, including climbing ladders or stairs if necessary. Tolerance for varied environmental conditions, including temperature changes, noise, and dust in warehouse settings. Ability to wear and use personal protective equipment (PPE) as required for safety. Schedule: Eight-hour shift Porcelanosa offer is contingent upon Proof of legal authorization to work in the United States for Porcelanosa, which will be confirmed by E-Verify within three business days of your hire date. Work Remotely No remote work is available. 2:00 PM - 10:30 PM

Job DescriptionHablamos Español NOW HIRING: Forklift Operators in Whippany & East Hanover, NJ Forklift Operator Pay Rate: $18.00/hr Shifts Available: 1st Shift: 7:00 AM - 3:15 PM 2nd Shift: 3:00 PM - 11:15 PM 3rd Shift: 11:00 PM - 7:15 AM Location: Whippany, NJ Key Responsibilities (GMP Environment) Safely operate forklifts to move, load, and unload materials and products. Transport materials throughout warehouse and production areas. Stack and organize pallets in designated storage areas, ensuring stability and accuracy. Follow warehouse layout and storage protocols to maintain proper inventory flow. Conduct pre- and post-shift equipment inspections (battery, forks, tires, safety features). Immediately report any product, pallet, racking, or equipment damage. Assist with inventory control: counting, labeling, and verifying stock. Load and unload trucks in accordance with safety procedures. Use scanners or WMS systems to track product movement. Maintain a clean and safe work area while following GMP and warehouse safety guidelines. Support general warehouse tasks (picking, packing, organizing) when not operating the forklift. Requirements Some clients may require a background check and drug screening. Ability to work in a fast-paced, GMP-regulated environment. Must be comfortable working in moderate to high noise levels. What to Bring When Applying Two valid forms of ID that authorize you to work in the United States. Ready to Start? Call us today at ************ Walk-ins WelcomeOffice Address: 159 Speedwell Avenue, Morristown, NJ 07960 Office Hours: Monday - Friday, 8:00 AM - 12:00 PM (Hours may vary; please call ahead to confirm.) If you want, I can also create a separate Spanish version for posting. #ZIP

Are you ready to embark on a journey where your passion for art, fashion, culture, and excellence converge? Welcome to UOVO-the epitome of sophistication in storage, management, and logistics of valuable art, fashion, and wine. We invite all voices, experiences, and talents to join us and become part of an unparalleled journey where your career aspirations align with the remarkable. With state-of-the-art facilities across the country, we work towards exceeding expectations, for both our clients and employees alike. At UOVO, we are more than logistics; we are architects of bespoke solutions and curators of extraordinary experiences. From climate-controlled storage to private viewing galleries, industry-leading technology to a full suite of services, UOVO crafts tailored solutions that go beyond preservation-they elevate. As part of the UOVO team you will work alongside industry professionals who share a passion for art, fashion, and logistics in a collaborative environment where your expertise contributes to the best-in-class employment and client experience UOVO provides! Art Handler/Driver, Long Island City UOVO seeks a Art Handler/Driver to join its dynamic and growing team. The ideal candidate will have experience working in the art world, storage/collection management knowledge, and will be comfortable moving a wide range of art objects. The Art Handler/Driver will report to the Technical Services Supervisor. Core Responsibilities Proper handling of art objects, using the appropriate methods and materials for packaging, loading & securing for safe transport Install/de-install artworks onsite or at offsite locations, often troubleshooting and utilizing critical thinking to solution scope changes Preparation and careful execution of paperwork, including bills of lading, labels, driver logs, and detailed condition reports with accompanying photos if necessary Receive and release shipments into warehouse facilities Pack artworks for local, national and international transportation and storage Maintain compliance with all local, state, DOT regulations Support to internal teams, as needed Weekend, overtime, and holiday work may be necessary; therefore, schedule flexibility is required Other projects as assigned by Manager Qualifications & Skills Team Player, able to work in a fast-paced, detail-oriented and dynamic environment Demonstrated knowledge of installation, packing and art handling Excellent communication and attention to detail to both clients and coworkers Ability to problem solve and solution onsite issues with the experience to know when to escalate problems to supervisor Valid driver's license; CDL license a bonus Ability to push and pull 150 pounds on a dolly or cart, as well as 50 pounds without mechanical aid Ability to carry 40 pounds of varying size and shape up to a distance of 90 feet Ability to stand, walk, squat, bend, kneel, crouch, twist, and reach overhead Ability to be exposed to outside weather conditions, including heat, cold, rain and snow Familiarity with the use of hand trucks, pallet jacks, jbars, dollies and other necessary warehouse equipment Experience with rigging is preferred This in-person position requires on-site presence at UOVO's Long Island City, NY facility five days a week with occasional requests to work nights and on weekends. Compensation & BenefitsUOVO offers competitive compensation, commensurate with experience.UOVO offers a robust suite of benefits including: 100% employer-covered medical plan option for team members as well as multiple Medical, Dental, and Vision plans options. 2 weeks annual paid vacation, with bi-annual increased vacation awards throughout the first 5 years of service 10 paid holidays plus one additional floating holiday Company-Sponsored Parental Leave policy Company-Sponsored Paid Sick Leave 100% 401k Employer match up to 3% of team member contributions. Flexible Savings Account, Commuter Benefits, and Childcare Benefits Company-sponsored Life Insurance and Long Term Disability Benefits Monthly Team Lunches and Birthday celebrations Team member Recognition Program ( the “Eggcellence Awards”

DESCRIPTION The Baler Operator is responsible for machinery that compresses and binds recyclable materials into bales for easy storage and transportation. This position requires the operator to monitor the machine's performance and make necessary adjustments to ensure quality and safety standards are met. The Baler Operator is responsible for conducting basic preventative maintenance and inspections of the machine, ensuring it is in proper working order. ESSENTIAL DUTIES & RESPONSIBILITIES Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Monitor the flow of materials ensuring they are loaded correctly into the baler Performs duties in a safe manner in compliance with all local, state, and federal regulations and company policies. Operates industrial balers and automated bunker system in the recycling plant. Performs all assigned basic preventative maintenance on industrial balers and associated equipment. Makes minor repairs and adjustments to industrial balers and associated equipment. Operates computer controlled automated bunker system. Properly utilize balers and bunkers to ensure single stream processing is not interrupted. Responsible for housekeeping in assigned area including equipment and work areas. Maintain timely, appropriate, and professional communications with plan operations, maintenance department, and baler supervisor. Provide daily baler production reports to plan operations. REQUIRED SKILLS & ABILITIES Performs duties in a safe manner in compliance with all local, state, and federal regulations and company policies. Operates industrial balers and automated bunker system in the recycling plant. Performs all assigned basic preventative maintenance on industrial balers and associated equipment. Makes minor repairs and adjustments to industrial balers and associated equipment. Operates computer controlled automated bunker system. Properly utilize balers and bunkers to ensure single stream processing is not interrupted. Responsible for housekeeping in assigned area including equipment and work areas. Maintain timely, appropriate, and professional communications with plan operations, maintenance department, and baler supervisor. Provide daily baler production reports to plan operations. Other duties as assigned. OTHER DUTIES All job requirements in this provided indicate the minimum level of knowledge, skills, and/or abilities deemed necessary to perform the job competently. Job descriptions are an overview of the duties, responsibilities, and requirements of the position. Employees may be required to perform other job-related assignments as requested. EXPERIENCE Must be able to read, speak, and write basic English Mechanical aptitude Previous experience operating industrial machinery Experience in the Recycling industry preferred. WORKING CONDITIONS Regular use hands and fingers to handle or operate objects, tools or controls, and reach with hands and arms Exposure to high traffic conditions and/or tight driving areas. Exposure to residential and commercial recyclables and waste. Ability to work flexible hours; overtime, weekends, and/or holidays. Ability to work overtime, weekends and/or holidays. Legally eligible to work in the United States. Valid driver's license (if applicable). Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.