Materials process engineer entry level jobs

The Senior Metallurgist plans and directs activities concerned with developing and maintaining metallurgical standards and procedures for forged product. Supports new product introduction through contract review and development of manufacturing / testing documentation. Develops process control parameters and reviews performance to determine compliance. Performs laboratory evaluation of metallographic samples. Develops laboratories to ensure capability and conformance to requirements. Facilitates First Article/Metallurgical Qualifications. Manages product and process control data. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. New Product Introduction / Contract Review / Change Management: * Review and evaluation of customer drawing and specification requirements directly impacting metallurgical product integrity and manufacturing practices * Develops quality plans and documentation requirements to evaluate metallurgical integrity of forged product during the manufacturing process * Qualifies incoming orders to ensure specification compliance for metallurgical/special processes / complete review as quality representative * Ensure metallurgical properties through design and communication of forge, heat treat, testing, and other manufacturing instructions * Prepares first article / metallurgical qualification approval documentation Test Failure / Thermal Non-Conformance Review and Analysis: * Disposition metallurgically non-conforming material and performs root cause correction action analysis * Negotiate concessions with customers for disposition of non-conforming parts * Develop corrective action processes and continuous improvement programs for metallurgical integrity of forged product Laboratory / Production Support: * Conducts internal and external quality audits of metallurgical / special processes * Lab evaluation including metallography and NDT micro examination * Orchestrating maintenance and calibration of lab equipment with internal and external resources * Ensuring proper heat treatment through daily review of processing records * Evaluating forge and heat treat furnace performance versus pyrometry requirements including detailed review of critical product * Responsible for required calibrations per customer standards for forge and heat treat furnaces, including outsourced pyrometry work * Preparing for forge and heat treatment portions of customer / 3rd party audits * Confers with Manufacturing and Engineering personnel in planning, scheduling, coordinating and directing quality / metallurgical evaluation activities to ensure conformance to customer requirements and specifications * Incoming raw material verification / release and product testing release

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose The Supply Chain Management Operations Department is responsible for the oversight, standardization and technical leadership of the internal material handling operations at the Honda automobile powertrain and final assembly sites across North America. The Process Engineer position is responsible for engineering and executing the internal logistics flow of parts through a specific Honda plant to the production line. This position will be responsible for supporting the development and design of internal material delivery processes, working and communicating with stakeholders, and developing solutions through process analysis, time studies, work balancing, etc. Key Accountabilities Support development, documentation and implementation of processes utilizing engineering tools (Maynard Operation Sequence Technique (MOST), AutoCAD, Visio, QMF, Excel, etc.) required to achieve project and business plan targets. Areas of responsibility include manpower planning, process and vanning layout design, expectation sheet development and New Model packaging evaluations. Identify and support implementation of process improvements in support of business plan objectives and general cost reduction. Execute tasks as prescribed by and maintain Specified Action Plans (SAP). Create SAP's for projects with limited complexity (less than $100,000). Maintain assigned process design through daily maintenance, process audits, and continuous improvement. Ensure all process related documentation is completed in the standard format, stored in the proper location, and communicated to all of the appropriate parties. Assist investigation of production related issues through situation analysis, using established problem-solving techniques and support the implementation of countermeasures. Qualifications/Experience/Skills Minimum Educational Qualifications: Engineering related degree or other relevant work experience Minimum Experience: 0-2 years of experience in engineering role Other Job-Specific Skills: Problem solving and decision-making skills. Proficient verbal and written communication skills. Ability to prioritize tasks and projects. Solid organizational skills. Proficiency with Microsoft Office (Excel, PowerPoint, Outlook). Understanding of warehouse management functions and support of manufacturing operation. Working Conditions Open office environment. Substantial overtime hours required during project / new model implementations. Alternate shift times may be required during project / new model implementations. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. Rotational Program Overview AEDP is a 3-year rotational program designed for entry level hires to explore up to three different design centers in their first three years with American Structurepoint. Develop Well-Rounded Engineers through rotations across our Road group and Indianapolis, Ohio, Florida/Texas Gain Exposure to Regional Projects and varying client needs Understand the Full Project Lifecycle from design to field implementation Build Cross-Office Collaboration Skills with teams across design centers and job sites Prepare Future Project Leaders with diverse, real-world experience Enhance Engagement & Retention by aligning strengths with roles and locations Why start your career American Structurepoint: Onboarding & Training: Learn from experienced professionals and build meaningful, long-term relationships Mentorship & Career Growth: Receive support and guidance as you grow your skills and advance your career Real Projects: Contribute to high-profile, community-impacting projects from day one Industry Connections & Networking: Take advantage of exclusive industry connections and professional opportunities Future Focused: Build a strong foundation for a long, successful career with opportunities to grow within the firm Responsibilities What you will do: Contribute to roadway designs, layout alignments, create typical sections, site assessment and engineering report development. Creating construction plan sets in MicroStation ORD CAD Program Prepare design calculation documentation Develop construction cost estimates Different projects would include Roundabouts, Urban Roads, Rural Roads and Large Interstate Improvements Work is completed in the office with occasional site visits Other duties as assigned Qualifications Who you are: Students majoring in any of the following disciplines: Civil Engineering, Environmental Engineering, Construction Engineering, Land Survey or Structural Engineering or other related programs with an emphasis on Civil Engineering Reliable transportation to and from office location Strong work ethic, willingness to learn and try new things Graduating in December 2025 or May/June 2026 American Structurepoint is an equal employer opportunity, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other characteristic protected by law.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of "power" that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize "the joy and freedom of mobility" by developing new technologies and an innovative approach to achieve a "zero environmental footprint." We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose The Supply Chain Management Operations Department is responsible for the oversight, standardization and technical leadership of the internal material handling operations at the Honda automobile powertrain and final assembly sites across North America. The Process Engineer position is responsible for engineering and executing the internal logistics flow of parts through a specific Honda plant to the production line. This position will be responsible for supporting the development and design of internal material delivery processes, working and communicating with stakeholders, and developing solutions through process analysis, time studies, work balancing, etc. Key Accountabilities * Support development, documentation and implementation of processes utilizing engineering tools (Maynard Operation Sequence Technique (MOST), AutoCAD, Visio, QMF, Excel, etc.) required to achieve project and business plan targets. * Areas of responsibility include manpower planning, process and vanning layout design, expectation sheet development and New Model packaging evaluations. * Identify and support implementation of process improvements in support of business plan objectives and general cost reduction. * Execute tasks as prescribed by and maintain Specified Action Plans (SAP). Create SAP's for projects with limited complexity (less than $100,000). * Maintain assigned process design through daily maintenance, process audits, and continuous improvement. * Ensure all process related documentation is completed in the standard format, stored in the proper location, and communicated to all of the appropriate parties. * Assist investigation of production related issues through situation analysis, using established problem-solving techniques and support the implementation of countermeasures. Qualifications/Experience/Skills Minimum Educational Qualifications: Engineering related degree or other relevant work experience Minimum Experience: 0-2 years of experience in engineering role Other Job-Specific Skills: * Problem solving and decision-making skills. * Proficient verbal and written communication skills. * Ability to prioritize tasks and projects. * Solid organizational skills. Proficiency with Microsoft Office (Excel, PowerPoint, Outlook). * Understanding of warehouse management functions and support of manufacturing operation. Working Conditions * Open office environment. * Substantial overtime hours required during project / new model implementations. * Alternate shift times may be required during project / new model implementations. What differentiates Honda and make us an employer of choice? Total Rewards: * Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) * Paid Overtime * Regional Bonus (when applicable) * Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) * Paid time off, including vacation, holidays, shutdown * Company Paid Short-Term and Long-Term Disability * 401K Plan with company match + additional contribution * Relocation assistance (if eligible) Career Growth: * Advancement Opportunities * Career Mobility * Education Reimbursement for Continued Learning * Training and Development programs Additional Offerings: * Tuition Assistance & Student Loan Repayment * Lifestyle Account * Childcare Reimbursement Account * Elder Care Support * Wellbeing Program * Community Service and Engagement Programs * Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Our award-winning client is seeking a Quality Engineer to join their team. In this role, you will play a key part in ensuring the quality of our molded foam products. You will coordinate internal audits, conduct plant assessments, track non-conformance reports, and manage quality records. You will also work closely with customers to address any issues and ensure their satisfaction. Responsibilities: Oversee internal audit scheduling, facilitation, and reporting. Conduct plant assessments, track non-conformance reports, and manage document control changes. Develop and maintain measurable charting and packing documentation. Generate cost of poor quality reports, weekly customer reports, and quality alerts. Schedule and summarize dock audits. Act as a quality representative for customers, including problem investigation and resolution. Coordinate supplier control and performance reporting. Maintain a safe work environment and adhere to all safety regulations. Demonstrate strong planning skills and the ability to manage multiple priorities. Possess excellent attendance and dependability. Required Qualifications: Associate's degree in a quality-related field (preferred). Experience in an automotive and quality environment. Excellent communication, interpersonal, and verbal skills. Proficiency in spreadsheets, Windows, and word processing software. Working knowledge of statistical process control (SPC), 8D problem-solving, 5 Whys, and Value Analysis/Value Engineering (VA/VE). Benefits: Competitive salary and benefits package. Opportunity to work in a fast-paced and growing environment. Build a rewarding career with a company committed to diversity and inclusion.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description Position Summary: The Product Engineer position is responsible for Product Engineering activities to support new product introduction, continuous improvement and manufacturing. Essential Functions: * Develops processes, defines controls, and institutes effective scrap elimination efforts on assigned parts. * Maintain a high level of quality for product design. * Write, issue, and continually update Engineering instructions * Manage activities to stay on schedule for product release, while maintaining budgeted development and part costs. * Identify and implement cost reduction opportunities. * Continuously evaluations/improves processes in order to maintain or improve upon budgeted yields. * Conduct dimensional probability studies. * Initiates, completes, and submit product qualifications * Develop and implement part specific procedures * Use statistical and graphical analysis techniques to disposition yield and dimensional elements of the casting process. * Conceptual design of required tooling and coordination of detailed design and build with in house and outside tool rooms. * Other duties as assigned. Required Skills: * Proven analytical, problem solving, and process improvement ability. * Working knowledge of process control methods * Demonstrated ability to develop & execute action plans that will deliver results * Demonstrated ability to manage multiple tasks and priorities and easily adapt to changing situations and priorities. * The ability to handle high stress associated with high activity with tight deadlines. * Excellent written and verbal communication and organizational skills. * Strong interpersonal and leadership skills. Desired Skills: * Highly organized, self-motivated individual who can work independently as well as work effectively in a collaborative team environment. * Demonstrated ability to lead programs / projects. * Proficiency in a major, industry standard 3D CAD software package * Working knowledge of Zero Defect Program: PFMEA, Control Plan, Process Control * Six sigma Certification preferred * Proven experience in Manufacturing Industry. Experience & Education * Bachelor's degree in Mechanical, Metallurgical, Materials or other related Engineering discipline. * Hands-on experience in the airfoils investment casting industry a plus Physical Demands Physical Demands Not at All Infrequently Occasionally Frequently Continually 1-33% 34-66% 67-100% 1-2x hr. 3-6x hr. 7-30 hr. >30x hr. Squatting X Bending X Kneeling X Reaching X Twisting X Sitting in a chair X Stair Climbing X Ladder Climbing X Other climbing (type) X Walking of rough surfaces X Near moving machinery X All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit us at *************** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Responsibilitiesarrow_right * Maintain Excellence: Support the surveillance and execution of the Global Management System (GMS) through internal audits, ensuring FST achieves excellence. * Ensure Compliance: Effectively close non-conformities to protect FST and its customers, preventing recurring issues. * Collaborate for Success: Work with various stakeholders to evaluate customer-specific requirements related to the Quality Management System and Warranty, ensuring legal compliance. * Innovate Quality Strategies: Define and identify new quality strategies and system tools to support FST's sustainable success, especially when market requirements change or new business is acquired. * Drive Continuous Improvement: Seek opportunities to enhance the Global Quality Management System, directly impacting FST's profitability. * Monitor and Improve: Evaluate and analyze Quality Key Performance Indicators, guiding improvement projects to promptly react and avoid waste. * Ensure Compliance: Execute internal system and process audits to confirm compliance with international standards and FST requirements, identifying best practices within the organization. Qualificationsarrow_right * Bachelor's Degree in Relevant Field; advanced degree preferred or compensating years of experience * Specified Years of Industry-relevant professional experience * Relevant certifications, system experience, and training * Professional-Level English language skills preferred * * Communication & Collaboration: Communicates clearly and concisely, while engaging proactively with colleagues at all levels of the organization. * Value for Customers: Anticipates, understands and meets internal/external customers' needs and expectations. Develops solutions based on a customer centric approach. * Innovation: Drives and supports innovative ideas, while taking informed risks to seek and develop new or improved solutions. * Drive & Execution: Proactively identifies what needs to be done and takes action. Explores new ways and pursues new opportunities.

* Maintain Excellence: Support the surveillance and execution of the Global Management System (GMS) through internal audits, ensuring FST achieves excellence. * Ensure Compliance: Effectively close non-conformities to protect FST and its customers, preventing recurring issues. * Collaborate for Success: Work with various stakeholders to evaluate customer-specific requirements related to the Quality Management System and Warranty, ensuring legal compliance. * Innovate Quality Strategies: Define and identify new quality strategies and system tools to support FST's sustainable success, especially when market requirements change or new business is acquired. * Drive Continuous Improvement: Seek opportunities to enhance the Global Quality Management System, directly impacting FST's profitability. * Monitor and Improve: Evaluate and analyze Quality Key Performance Indicators, guiding improvement projects to promptly react and avoid waste. * Ensure Compliance: Execute internal system and process audits to confirm compliance with international standards and FST requirements, identifying best practices within the organization. Qualificationsarrow_right * Bachelor's Degree in Relevant Field; advanced degree preferred or compensating years of experience * Specified Years of Industry-relevant professional experience * Relevant certifications, system experience, and training * Professional-Level English language skills preferred * * Communication & Collaboration: Communicates clearly and concisely, while engaging proactively with colleagues at all levels of the organization. * Value for Customers: Anticipates, understands and meets internal/external customers' needs and expectations. Develops solutions based on a customer centric approach. * Innovation: Drives and supports innovative ideas, while taking informed risks to seek and develop new or improved solutions. * Drive & Execution: Proactively identifies what needs to be done and takes action. Explores new ways and pursues new opportunities. The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law.

We are seeking a Quality Engineer with strong expertise in IATF 16949 auditing and quality engineering to join our team. This role is critical in maintaining compliance, driving continuous improvement, and supporting supplier quality initiatives. Key Responsibilities Include * Lead and manage IATF 16949 audits (internal and external) * Develop and maintain quality systems and documentation to meet automotive standards * Support supplier quality activities, including issue resolution and PPAP documentation * Collaborate with cross-functional teams to ensure compliance and quality performance * Provide guidance and training on quality processes and standards * Perform root cause analysis and implement corrective actions for quality issues * Balance responsibilities between on-floor activities (70%) and desk work (30%) Must Have * Internal Lead Auditor certification preferred * Proven experience conducting audits (internal/external) * Automotive industry experience required * Strong understanding of IATF 16949 requirements and APQP processes * Excellent problem-solving and communication skills Nice to Have * Bachelor's degree preferred, but equivalent experience is accepted * Experience in rubber manufacturing is a plus Job Type & Location This is a Contract to Hire position based out of Bluffton, OH. Pay and Benefits The pay range for this position is $30.00 - $38.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Bluffton,OH. Application Deadline This position is anticipated to close on Dec 8, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit ****************** Job Summary Responsible for ensuring one technical process exists within the PET/Facility. This includes equipment, materials, process, and procedures with applicable validation. Leads improvement initiatives as the technical expert and acts as the first line of support for all project related work. Responsible for maintaining a strong relationship with Technical Operations and Quality areas, as well as, collaborating within the PET/Facility and with other PET Engineers. Serves as the single point of contact for all technical issues. Job Responsibilities Ensures there is one technical process with centerlines, critical process parameters, material fit for use, and operating procedures are clear and delivers a capable process Leads the following continuous process improvement efforts: changeover reduction, yield improvements, OEE improvements, maintenance reliability and waste reduction for improvement of automated pharmaceutical manufacturing equipment Ensures success criteria for technology transfer and validation is clear and the process is capable for the merge into the PET/Facility process Generates a variety of URS, FAT, SAT, commissioning and IQ/OQ/PQ protocols/ reports Coordinate and support PET's/Facility improvement initiatives that define equipment data, equipment capabilities, utilization, efficiencies and obsolescence. Manages life cycle of assets. Maintain external technical relationships and collaborates with equipment and material suppliers Identify, develop, generate and manage implementation of appropriate change controls to improve processes and address root causes identified in investigations Perform and maintain risk management activities for new and existing processes / equipment Initiate deviations and performs/facilitates the technical investigations and assessment of impacts Authors and review documents including Standard Operating Procedures, Batch Records, Rework procedures and other forms. Author, review and approve validation and change control documents such as master plans, protocols, summary reports and change requests Provides input and develops user requirements for new asset procurement Provide engineering and project management services Assist in the development of project justification and engineering proposals including providing input for capital planning process Identify and support technical training requirements for Operations/Engineering/Maintenance for new and existing processes/equipment Perform routine validation and periodic reviews activities Works collaboratively within PET as well as with other PET Engineers and Technology Community such as Technology and Engineering, global colleagues Supports and leads technical trouble shooting. On-call support as required Key contact for regulatory inspections as technical process owner Participates in annual product review process Participates in biennial critical systems review process. Responsible for process validation required as a result of changes to validated processes within the PET. Minimum Qualifications Training or experience in the applicable following technologies: mechanics, hydraulics, pneumatics, vacuum technology, electronics, programmable logic controllers, HMI, Historian/reporting, computerized systems, vision systems, refrigeration, test equipment for electrical and mechanical trouble shooting, aseptic/controlled environment, unit operations, formulation, packaging, process validation, cleaning validation, technology transfer, change control, applied statistics Proficiency in at least one of the following disciplines: automation/ controls, aseptic/packaging equipment, process/materials, maintenance, validation Preferred Qualifications BS in Engineering, or related science Strong verbal and written communication skills Proven ability to work effectively in a team environment Experience managing external technical relationships Strong mechanical/technical aptitude Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $70,000.00 - $96,250.00 per year. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters.

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit ****************** Job Summary Responsible for ensuring one technical process exists within the PET/Facility. This includes equipment, materials, process, and procedures with applicable validation. Leads improvement initiatives as the technical expert and acts as the first line of support for all project related work. Responsible for maintaining a strong relationship with Technical Operations and Quality areas, as well as, collaborating within the PET/Facility and with other PET Engineers. Serves as the single point of contact for all technical issues. Job Responsibilities * Ensures there is one technical process with centerlines, critical process parameters, material fit for use, and operating procedures are clear and delivers a capable process * Leads the following continuous process improvement efforts: changeover reduction, yield improvements, OEE improvements, maintenance reliability and waste reduction for improvement of automated pharmaceutical manufacturing equipment * Ensures success criteria for technology transfer and validation is clear and the process is capable for the merge into the PET/Facility process * Generates a variety of URS, FAT, SAT, commissioning and IQ/OQ/PQ protocols/ reports * Coordinate and support PET's/Facility improvement initiatives that define equipment data, equipment capabilities, utilization, efficiencies and obsolescence. Manages life cycle of assets. * Maintain external technical relationships and collaborates with equipment and material suppliers * Identify, develop, generate and manage implementation of appropriate change controls to improve processes and address root causes identified in investigations * Perform and maintain risk management activities for new and existing processes / equipment * Initiate deviations and performs/facilitates the technical investigations and assessment of impacts * Authors and review documents including Standard Operating Procedures, Batch Records, Rework procedures and other forms. Author, review and approve validation and change control documents such as master plans, protocols, summary reports and change requests * Provides input and develops user requirements for new asset procurement * Provide engineering and project management services * Assist in the development of project justification and engineering proposals including providing input for capital planning process * Identify and support technical training requirements for Operations/Engineering/Maintenance for new and existing processes/equipment * Perform routine validation and periodic reviews activities * Works collaboratively within PET as well as with other PET Engineers and Technology Community such as Technology and Engineering, global colleagues * Supports and leads technical trouble shooting. * On-call support as required * Key contact for regulatory inspections as technical process owner * Participates in annual product review process * Participates in biennial critical systems review process. * Responsible for process validation required as a result of changes to validated processes within the PET. Minimum Qualifications * Training or experience in the applicable following technologies: mechanics, hydraulics, pneumatics, vacuum technology, electronics, programmable logic controllers, HMI, Historian/reporting, computerized systems, vision systems, refrigeration, test equipment for electrical and mechanical trouble shooting, aseptic/controlled environment, unit operations, formulation, packaging, process validation, cleaning validation, technology transfer, change control, applied statistics * Proficiency in at least one of the following disciplines: automation/ controls, aseptic/packaging equipment, process/materials, maintenance, validation Preferred Qualifications * BS in Engineering, or related science * Strong verbal and written communication skills * Proven ability to work effectively in a team environment * Experience managing external technical relationships * Strong mechanical/technical aptitude Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $70,000.00 - $96,250.00 per year. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters.

Aero Engine Process Development Engineer Makino is a world leader in metal-cutting and machining technology. As a leader in advanced manufacturing machine tool technology, Makino enables its customers to realize the highest level of quality with the fastest time to market. When companies make the parts that matter for automotive, aerospace, medical, die-mold and other industries worldwide, they make them with Makino. About this Position: Level I Aero Engine Process Development Engineer plays a key role in supporting Makino's pre- and post-sales efforts related to aerospace engine component manufacturing. In this hands-on role, you'll gain experience evaluating customer manufacturing needs, developing process plans, designing tooling and fixtures, and creating NC programs using Siemens NX. You'll also simulate programs in CGTECH Vericut and execute them on Makino's advanced milling and grinding platforms, utilizing 3+2 and simultaneous 5-axis machining techniques. This position is based at our Corporate Office in Mason, OH, and involves a mix of computer-based and shop floor responsibilities. Travel is project-dependent and may be required up to 50% of the time. Regular on-site presence at the office or customer locations is expected. Education & Experience • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or a related technical field, plus a minimum of 2 years of relevant hands-on experience. Individuals who have completed a technical certificate program in machining, manufacturing technology, or precision tooling will also be considered with equivalent experience. • Candidates without a degree may also be considered with 5+ years of relevant hands-on experience Relevant experience may include hands-on roles such as machinist, tool maker, or CNC technician, particularly in job shops, machine shops, or precision manufacturing environments, with exposure to aerospace components, turbine engine hardware, tight-tolerance machining, or high-mix, low-volume part setup. What you need to be successful in the role: Ability to present a professional image, while demonstrating excellent communication and customer relation skills. Positive attitude, open minded team player, but capable of thinking “ outside the box ”. Ability to multi-task, are self-motivated and have the desire to work in a manufacturing environment. Operational knowledge of Multi-Axis CNC Machining Centers, with a working knowledge of Fanuc and/or Makino controls. Computer literate to support industry standard software applications. Skills you will develop in this position: Detailed knowledge of CNC part programming, with an understanding of macro programming. A thorough understanding of solid modeling and 3,4, and 5 axis CAM programming utilizing Siemens NX software. Develop milling and grinding part processing solutions for exotic metals, and high temperature alloys. Investigate new techniques and tooling, in anticipation of customer needs, develop new solutions when the existent technology is inadequate. Strong technical analysis and troubleshooting skills, with the ability to analyze and improve machining processes including but not limited to fixturing issues, CNC program and/or parameter and tooling issues. Your responsibilities: Execute Customer specific projects, which will require that you design tooling, design dressing rolls, design fixture solutions, create NC programs, etc., at either Makino Mason, or the customers facility. Perform test cuts and machine demonstrations for Aero Engine components, including virtual and digital representations. Documentation of project results and customer specific processing. Perform post-sale startup assistance and training for customers, at their facility. We believe that the interests of our company and people are inseparable, and we are committed to developing a diverse team of creative and independent professionals. Employees enjoy a stable work environment from a company with years of success and growth in the machine tool industry. Makino offers competitive pay, generous benefits, and ongoing training. Makino is an Equal Opportunity Employer, including Veterans and Individuals with Disabilities

Fantastic Opportunity to Be Part of a Great Team! Blair Rubber Co. is the manufacturer of and worldwide supplier of roofing membranes and ancillary products, and rubber linings which protect vessels and equipment from corrosion and abrasion in the harshest chemical environments. We deliver the shortest lead times in the industry and utilize the highest equipment technology to support our process. Job Description Chemical Process Engineer Co-Op Location: Seville, OH Type: Full Time Co-Op / Paid Intern Department: Plant Operations **Must be local to Ohio State** Relocation Assistance not available Blair Rubber Co. is the manufacturer of and worldwide supplier of roofing membranes and ancillary products, and rubber linings which protect vessels and equipment from corrosion and abrasion in the harshest chemical environments. We deliver the shortest lead times in the industry and utilize the highest equipment technology to support our process. Check out our introduction video here: ********************************************* WHAT'S IN IT FOR YOU? Competitive Wage ($23.00-$25.00 per Hour) Hands-on experience with an industry leader in manufacturing, contributing to the production of high-quality roofing materials. Work with a company committed to eco-friendly practices and sustainable production methods. Exposure to different roles or departments to help you clarify your career interests and path. Potential for future Internship/Co-Op placements or full-time roles upon graduation. WHEN YOU JOIN US, YOU WILL BE; Perform engineering projects utilizing sound design principles Works with operations team to identify and implement safety and production CI initiatives. Create work instructions and perform job hazard analyses for areas on the production floor. Participate in safety improvements for all equipment and continuous quality improvements for processes Creates layouts and process diagrams to support standardization and CI. Identify hazards by analyzing jobs and their associated tasks. Assist in ensuring the site complies with corporate process standards. This includes preparation for the annual corporate process audit and follow-up on all issues raised during the audit. Identifies potential areas of product improvement; recommends and assists with the development of appropriate solutions. Working in an office environment with limited exposure to the production floor where various rubber, adhesives, grease, oils, carbon black, steam and industrial manufacturing machines are used. Perform other duties as assigned OUR IDEAL CANDIDATE; Sophomore, Junior, Senior, specializing in Chemical Engineering program. Working knowledge of Microsoft Office products Excellent verbal and written communication skills Excellent interpersonal and customer service skills Excellent organizational skills and attention to detail Excellent time management skills with a proven ability to meet deadlines Ability to analyze and solve problems Take initiative to identify and resolve problems Capable of learning ERP software and other ancillary software General computer knowledge Personal Protective Equipment (PPE), safety and values focused Leading by example with safety and safe work habits Prolonged periods working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping Good hand dexterity Comprehend information and ideas presented verbally or in writing Use effective time management to ensure that tasks and projects are completed within agreed time limits Produce a tangible, positive impact Work effectively as part of a team or as an individual Achieve consistently high results Demonstrate high standards of professional conduct WORK AUTHORIZATIONS AND TRAVEL; Must be authorized to work in the United States Potential travel requirements Benefits of Employment: Blair Rubber Company recognizes that its success is due to the strength of its employees. A primary goal of Blair Rubber Company is to promote individual employee's sense of accomplishment and contribution so that employees enjoy their association with Blair Rubber Company. The Company invests in its employees so that they are the most knowledgeable in the industry, and undertakes great efforts to nurture loyalty to, and teamwork at, Blair Rubber Company. We are pleased to offer competitive compensation, health care, a progressive and challenging workplace and a commitment to teamwork and integrity. Diversity and Equal Opportunity Employment: Blair Rubber Company is an equal opportunity employer. We are committed to diversity and inclusion and are pleased to consider all qualified applicants for employment without consideration to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status or disability. Blair Rubber Company encourages and welcome applications from people with disabilities. Accommodations are available on request for candidates taking part in all aspects of the selection process.

At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil, 'all, Loctite, Snuggle, and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. Dare to learn new skills, advance in your career and make an impact at Henkel. What you´ll do * Gain hands-on experience supporting real-world projects and continuous process improvement initiatives. * Assist in the design and implementation of new processes to enhance operational efficiency. * Guide and collaborate with contractors and employees during project execution phases. * Review, design, and propose changes to active projects under supervision. * Participate in cross-functional meetings to gather input and align project goals. * Document project progress and contribute to technical reporting and presentations What makes you a good fit * A rising junior or senior graduating in 2027 or 2028 pursuing a degree in Chemical Engineering, Electrical Engineering or Mechanical Engineering. * Proficiency in Microsoft Office tools, including Excel, Word, PowerPoint, and Power BI. * Familiarity with PLC (Programmable Logic Controller) programming and automation systems is a plus. * Experience with AutoCAD for drafting and reviewing technical drawings. * Strong technical aptitude and interest in process design and improvement. Some perks of joining Henkel * Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide. * Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses. * Networking events with Henkel business leaders, experts and sustainability ambassadors. * Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals. * In-person and virtual social events to connect with other Henkel interns across the country. Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. Additional information * This internship is NOT eligible for a housing stipend or relocation support. * Henkel's Summer 2026 internship program starts on May 27th, 2026, and runs through mid-August. * Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled. * If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team. * If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed. The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. JOB ID: req75139 Job Locations: United States, OH, Delaware, OH Contact information for application-related questions: ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. Application Deadline: As long as the vacancy is listed on our Career Site, we are happy to receive your application Job-Center: If you have an application already, you can create or log in to your account here to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. Accept for all YouTube content LOAD EXTERNAL CONTENT Deactivate loading external content from YouTube. How is work at Henkel About Henkel Building on a strong legacy of almost 150 years, we are leading the way to reimagine and improve life every day. Today and for generations to come. Through our innovative and sustainable brands and technologies, across our teams around the world. Henkel holds leading positions in both industrial and consumer businesses: Our portfolio includes well-known hair care products, laundry detergents, fabric softeners as well as adhesives, sealants, and functional coatings.

At BWX Technologies, Inc. (NYSE: BWXT), we are People Strong, Innovation Driven. A U.S.-based company, BWXT is a Fortune 1000 and Defense News Top 100 manufacturing and engineering innovator that provides safe and effective nuclear solutions for global security, clean energy, environmental restoration, nuclear medicine and space exploration. With more than 7,800 employees, BWXT has 14 major operating sites in the U.S., Canada and the U.K. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. Our company supplies precision manufactured components, services and fuel for the commercial nuclear power industry across four continents. Our joint ventures provide environmental restoration and operations management at a dozen U.S. Department of Energy and NASA facilities. BWXT's technology is driving advances in medical radioisotope production in North America and microreactors for various defense and space applications. For more information, visit ************ . Follow us on LinkedIn , X , Facebook and Instagram . Manufacturing Engineer - BWX Technologies, Inc. - Barberton, Ohio Responsibilities include: Responsible for development and support of manufacturing process plans in accordance with contract technical requirements. The Manufacturing Engineer assumes responsibility for implementation of the manufacturing process and improvements to the process during the complete fabrication cycle. Ensures all design and quality requirements are satisfied. Works with Design Engineering during the component design phase to ensure the design can be manufactured in a cost-effective manner. Interfaces directly with customer representatives and prepare data or presentations as needed Identifies facility and tooling requirements, manufacturing methods and /or develops new manufacturing methods. Identifies material requirements and supports procurement. Monitors performance and controls costs of manufacture. Prepares technical procedures and documents. Resolves any problems encountered during manufacture. Works with vendors as necessary. Provides status and schedule support of products during the complete manufacturing cycle. Prepares Program Plans as required, incorporating necessary schedule and support information. Job Qualifications/Requirements: Qualifications include strong communications skills, and interest in working with multiple disciplines in support of product design and manufacture and adept with MRP & Microsoft Office programs. Bachelor's degree in engineering (Mechanical Engineering preferred) Candidate must be a U.S. Citizen and able to obtain and maintain a DOE issued Security Clearance Pay: $64,000 - $101,000 The base salary range for this position in Ohio (US-OH) at the start of employment is expected to be between $64,000 and $101,000 per year. However, the base salary offered is based on local job market factors, and may vary further depending on factors specific to the selected job candidate, such as job-related knowledge, skills, experience, and other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of participation in these benefit plans will be provided at such time the selected job candidate receives an offer of employment. If hired, the selected job candidate will be employed 'at-will,' unless employed at a location and in a position subject to a collective bargaining agreement. The company further reserves the right to modify base salary (as well as any other discretionary payment, compensation or benefit program) at any time, including for reasons related to individual performance, company or individual department/team performance, and other market factors. As a federal government contractor, BWX Technologies, Inc. and any subsidiaries, affiliates and related entities ("BWXT" or the "Company") complies with all federal, state, and local laws and customer requirements regarding health and safety protocols. As such, all BWXT new hires will be required to adhere to applicable Company health and safety requirements within the workplace as a condition of employment. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified information or matter. Position requires U.S. citizenship with (no dual citizenship) ability to obtain and maintain a Department of Energy (DOE) security clearance which involves an extensive criminal and financial background investigation, drug test and previous employment reference verifications. BWXT is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, sex, national origin, citizenship, age, disability, protected veteran or other protected status. BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid ("Agreement"). BWXT may consider any candidate for whom a recruiter or agency has submitted an unsolicited resume and explicitly reserves the right to hire such candidate(s) without any financial obligation to the recruiter or agency unless an Agreement is in place prior to presentation and such Agreement explicitly encompasses the job opening for which such fees or costs are sought. An email, verbal or other informal contact with any person within BWXT will not create a binding agreement. Agencies or recruiters without an Agreement are directed not to contact any hiring managers of BWXT with recruiting inquiries or resumes. Recruiters and agencies interested in partnering with BWXT may contact BWXT's Talent Acquisition team at [email protected]. Job Segment: Nuclear Engineering, Facilities, Manufacturing Engineer, Security Clearance, Recruiting, Engineering, Operations, Government, Human Resources

Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities , our diverse 750+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying, and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem-solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward- advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors The successful Project Engineer will have the opportunity to lead a multi-disciplinary team of engineers and technicians on municipal projects. Project engineering responsibilities include infrastructure design, preparation of construction documents, cost estimating, and thorough project QA/QC. Project Management duties include developing and managing the project scope, schedule, and budget; and delivering an overall quality project to our clients. Collaboration with a team of engineers and mentoring of entry-level staff will be essential. Your Responsibilities: Managing multi-disciplinary engineering projects and engineers. Developing and maintaining project scope, schedule, and budget. Project Management with municipal projects involving infrastructure design, site/civil design, roadway rehabilitation/reconstruction, and pedestrian/bicycle facilities. Understanding of State, Local, and Federal funding programs. Understanding ODOT design criteria, standards, and specifications. Participation in local professional society functions. Client relationship management. Business development. Requirements: Education, Experience & Licensure: Ohio Prof. Engineering License. 4-10 years' Municipal Project Engineering. Experience with AutoCAD/Civil 3D, and/or MicroStation ORD. Technical Skills: The desire and ability to build strong client relationships. Ability to train entry-level engineers and interns. Excellent communication and organizational skills and enjoy working in a team environment. Benefits Summary At OHM Advisors, our people are our greatest asset. We're committed to providing a supportive and rewarding workplace that fosters personal and professional growth. That's why we offer a competitive benefits package designed to meet your unique needs. Benefits: BCBSM Medical, Dental and Vision Company Profit Sharing Flexible Spending & Health Savings Accounts 401(k) retirement savings plan with employer matching contribution Paid professional association membership Tuition & Certification Expense reimbursement Volunteer Service Leave 100% Employer-Paid Life Insurance Short & Long-Term Disability Options Career Advancement & Enrichment Programs: Voluntary Wellness Program OHM Grad School OHM University You can read more about each of these programs on our website. OHM Advisors is an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-CC1

Advanced Level Manufacturing Engineer Be involved in the product life cycle of for the defense and aerospace industry! We are in search of manufacturing engineers to join our team of experts! If this is THE job for you, just complete the quick and easy online application for consideration. FUNCTION: Respond to customer solicitations and provide to the manufacturing and production control departments all necessary documentation and information needed to efficiently complete the requirements of a customer contract. DUTIES AND RESPONSIBILITIES: Review and respond to request for quotes to improve overall quality, productivity and understanding of customer requirements. Create routers for tools and cost-effective routing through the shop, identifying ways for expediting product where possible. Provide technical assistance to supervision and machinists/fabricators with questions pertaining to the manufacturing process. Identify fixturing and special tooling needs as required. DESIRABLE KNOWLEDGE/EDUCATION High school diploma or GED required. Advanced level of experience in an engineering role that builds a product via CNC machines or through highly advanced fabrication. Preference is given for this experience in a defense or aerospace industry. DESIRABLE EXPERIENCE/SKILL Exceptional problem solving, troubleshooting skills, attention to detail and accuracy required. Excellent communication skills with ability to work with people at levels of the organizational. Working knowledge of GD&T and blueprint reading is required. RELATIONSHIPS: Demonstrates a highly cooperative demeanor with other employees and willingly takes the initiative to help others succeed. Develop effective relationships with employees of all departments. Willing to share knowledge with those individuals who are responsible for producing parts that conform to the customer's requirements. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

We are seeking a proactive and detail-oriented individual to join our Process Improvement team as a Process Improvement Intern. This internship offers exposure to various facets of sales, services, and operations management and provides an opportunity to gain valuable hands-on experience in a fast-paced environment. The ideal candidate is organized, adaptable, and possesses strong problem-solving skills. RESPONSIBILITIES Collaborate with team members to identify inefficiencies in operational processes and propose solutions for improvement Collect, analyze, and present data related to key performance indictors (KPIs) and operational metrics. Prepare reports to track progress and identify trends Maintain accurate records and documentation related to operational processes, procedures, and compliance requirements. Participate in quality assurance processes to ensure products or services meet established standards and customer requirements. QUALIFICATIONS Must be pursuing a degree in Business Administration, Operations Management, Supply Chain Management, or related field Excellent written and verbal communication skills Demonstrated work ethic and detail-orientation Strong analytical and critical thinking skills Ability and willingness to learn in a fast-paced environment and produce high-quality work Collaboration and teamwork PHYSICAL & ENVIRONMENTAL DEMANDS No special Physical Requirements TRAVEL REQUIRED None The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-PR1

Job Title: Process Engineering Intern Reports To: Process Engineering Department Manager Status: Full-Time Non-Exempt JOB SUMMARY: The Process Engineering Intern is expected to use the academic knowledge gained to support engineers in meeting a client's needs with respect to system design and process operations. This would include the areas of design innovation, system performance improvement, quality and reliability improvements, and cost reduction opportunities. ESSENTIAL JOB FUNCTIONS: The responsibilities listed are fundamental to the position and must be performed successfully under the guidance, instruction, and mentorship of senior engineers and the department manager. Other responsibilities may be assigned. Develop process flow diagrams (PFD's). Generate Heat & Material Balances for process either by hand or using simulation software such as Aspen Tech. Assist in the development of piping and instrumentation drawings (P&ID's) for the process. Perform process calculations including line sizing, pump hydraulics, safety relieving, etc. Creating process lists, including equipment lists, utility matrices, specialty parts lists, valve lists. Aid in conveying process data needed for the sizing of instruments to be used in the process. Generate equipment specifications for vessels, heat exchangers, pumps, distillation columns, etc. and work with equipment vendors to obtain the required equipment needed for a project. Generate bid tabulations of equipment from vendor quotations. Provide input as needed to other disciplines during project execution. Work with lead engineers to expand knowledge base of the wider duties and methods of process engineering in capital projects. Work with senior engineers to develop calculation and sizing tools relevant to the process engineer field JOB REQUIREMENTS: Education/Experience: Enrollment in a 4-year BSChE degreed program Good communication and teamwork skills. Experience in previous co-op or internship related to process design on specialty chemical, pharmaceutical, and/or bio-fuels projects is a plus. Previous co-op or internship that includes Site Experience is a plus Working knowledge of basic software tools is a plus Working Hours/Environment Hours average 40 per week. Work typically performed in an indoor office setting/client site. Travel: Minimal Physical Demands: Frequently required to sit at a desk/workstation for long period of time. Ability to work at a computer terminal for extended periods of time. Light Lifting up to 20 lbs. Ability to speak to and hear employees/clients via online meeting software or in person. Body motor skills sufficient to enable incumbent to move around an office environment. Ability to analyze unique situations and develop appropriate response.