Quality Control Inspector jobs at Matrix Service Company

Responsibilities Conduct quality inspections on incoming concrete deliveries to insure proper mix being used. Assist in concrete service issues. Assist with jobsite inspectors as well as testing companies. Maintain accurate records of any issues on jobsite. Collaborate with production teams to address quality issues. Skills Concrete construction experience Ability to interpret blueprints Familiarity with testing equipment and industry standards Excellent attention to detail with strong analytical skills. Ability to work collaboratively in a team environment while maintaining independent judgment

William A. Hazel, Inc., a total site development contractor for over 60 years, is looking for a Quality Control Officer. The individual in this position is responsible for promoting, monitoring, and coordinating the Company's Quality Management Plan for all projects assigned. This person will assist the Corporate Quality Control Manager and the Construction Managers in the implementation of quality control procedures and provide oversight and guidance to ensure that construction, safety, and quality standards are upheld. Essential Functions Analyze daily schedule for possible high risk work items and coordinate with any lab subcontractors for each day's work Manage time as required to monitor work without direction from Corporate QC Manager Identify and report any work deficiencies/non-conformities for tracking and resolution. Assist the Corporate QC Manager in identifying root causes Fill out daily reports and document regular on-site construction to ensure compliance with contract documents Monitor, observe, and report on field quality control for materials testing activities and coordinate routine field tests Inspect materials delivered to the project to verify that the materials received are accompanied by required documentation and are free of damage or defect. Check that materials are stored onsite in a manner that will protect them from weather or equipment damage. Be a subject matter expert for standards and specifications for projects assigned, and provide guidance for project teams Ensure William A. Hazel, Inc receives documentation of QA tests and inspections, document through pictures when QA documents are not available Create and provide records related to quality system to document control procedures Coordinate with the Corporate QC Manager to determine weekly high-risk items for William A Hazel, Inc. that will need higher levels of oversight and monitor them accordingly Must feel comfortable working with teams in the field as well as attending meetings in the office Review hazard analysis, contractor work plans, progress reports, quality reports, and other tasks assigned by the Corporate QC Manger Identify conflicting or unclear project requirements and notify Project Management Staff Actively coordinate with the Corporate Quality Control Manager Maintain relationships with QA inspectors and ensure William A Hazel, Inc. is not held responsible for requirements above and beyond those specified in the contract Required Skills/Abilities Must be able to pass drug and alcohol test. Must have a valid Driver's License. Ability to respond effectively to the most sensitive inquiries or complaints Exceptional organizational and time management skills Ability to read and comprehend contract documents, including complex plans, specifications, and shop drawings Knowledge of concrete, asphalt, earthwork, and/or utility construction methods and testing Must be able to work outside in all types of weather conditions. Good communication skills. Proficient personal computer skills including electronic mail, record keeping, routine database activity, word processing, spreadsheet, graphics, etc. Experience coordinating inspection duties with multiple simultaneously operating crews Willing and able to obtain the following certifications within 6 months of hiring: OSHA 10 First Aid/CPR Virginia DEQ Storm Water Inspection Virginia DEQ Erosion and Sediment Control Inspection VDOT ESCCC Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Transportation is the responsibility of the employee. If the driving of a company vehicle is required, then the guidelines of the company's driver qualifications standards must be met. Must be able to pass all required contract security and citizenship requirements Education and Experience Minimum 7 years' experience managing or responsible for quality assurance/control for highway, site development, paving, utility relocations, or related experience. A bachelor's degree may substitute for up to two years of relevant field experience. Experience on either DOT, Municipal, or USACE projects Knowledge of VDOT, WVDOH, or FHWA standards Knowledge of ISO 2015:9001 Knowledge of USACE RMS CM and EM-385-1-1 Knowledge of VDOT, AASHTO, and/or ASTM test procedures Preferred certifications: USACE QCM Virginia DEQ RLD VDOT Intermediate Work Zone Traffic Control VDOT Asphalt Field Level 1 VDOT Concrete Field Level 1 VDOT Soils and Aggregate Compaction VDOT Pavement Marking VDOT Guardrail Installation Training (GRIT) Benefits Paid time off, health, dental, life and disability insurance. Education assistance 401k/matching William A. Hazel, Inc. is an equal opportunity employer. We do not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability, genetic information or any other characteristics protected by law.

Thalle Construction Co., Inc. is pleased to announce a career opportunity for a Quality Control Technician on the Central Everglades Planning Project (CEPP) Everglades Agricultural Area (EAA) A-2 Reservoir in Palm Beach County, Florida. This project marks the largest contract in the Jacksonville District's history, valued at $2.87 billion. Thalle will oversee the construction of a 17.75-mile embankment dam and associated structures. This project offers potential Project Team members a valuable opportunity to broaden their professional experience and advance their careers throughout its duration. The CEPP plays a vital role in Everglades restoration, aiming to enhance ecosystem health, improve water storage, and increase resilience to climate change. Thalle, established in 1947, is a heavy civil construction company with a corporate office located in Hillsborough, NC and a regional office in Alvarado, Texas. Thalle currently has active heavy civil construction projects spanning from New York to South Florida to Texas and continuing to expand our geographical footprint. Our diverse and expansive project scope of heavy civil infrastructure projects incorporates all degrees of civil construction that includes but is not limited to; Conventional Concrete, Roller Compacted Concrete and Earthen Dams, Navigational Waterway Locks, Reservoirs, Large Diameter Underground Utilities, Treatment Facilities, Landfills, Site Work, Mass Soil & Rock Excavation, Coal Ash Closures, DOT Highway & Bridge Construction, and on demand emergency services, etc. We are a proud representative of The Tully Group (Tully) who was established in 1921 and developed into one of the nation's largest privately held, family-owned construction firms. Tully's corporate office, located in New York City, has provided an opportunity to develop and sustain a long history of heavy civil projects in the Metro New York Area and New Jersey. Visit ***************** for more information. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, and 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify, and Drug Free Workplace. Location: Palm Beach County, FL Job Title: Quality Control Technician Overview: The Quality Control Technician is responsible for full inspection of products and installation to ensure compliance with the contract plans and specifications. This position reports to, collaborates with, and follows the direction of the Quality Control Manager. Duties and Responsibilities: Inspect work during construction and during final inspection to ensure compliance with the contract documents. Provide inspection for surface preparation, concrete testing data, formwork, misc. metals, reinforcing bar, water stop, concrete finish and curing operations. Review installation plans and materials to ensure compliance with the contract document. Prepare daily field inspection reports. Report deficiencies to the project Quality Control and Operations Teams. Education and/or Work Experience Requirements: 5 (+) years' experience in the area of heavy civil works construction similar to the work being performed at this project. Ability to interpret complex construction plans and specifications. Ability to write reports using Microsoft Word or Excel. Ability to work with a fast-paced team in an aggressive construction environment. United States Army Corps of Engineers Project Experience is preferred. Strong ability to multitask, work independently under pressure, and within tight deadlines. Prior heavy civil site project experience such as water control, dam, levee, concrete, and mass excavation experience. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state, and local standards. Must be able to lift and carry up to 50 lbs. Must be able to move freely about a construction site that at times present a demanding terrain including, but not limited to climbing of ladders and stair towers, uneven and often wet surfaces, and slopes. Must be able to talk, listen and speak clearly on telephone.

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Herzog Contracting Corp. is currently seeking a Quality Control Inspector in San Antonio, TX to join our team. Duties and Responsibilities: . * The candidate is responsible for controlling the quality of all construction works under the direction of the QC Manager. Dedicated full time to the construction project, with no other responsibilities other than quality related duties. Also responsible for the construction quality control documentation including reports, completed submittals and approved shop drawings in a controlled and secure documentation system. * Additionally, the candidate is expected to identify and implement quality management needs beyond ISO 9001:2015 on a project-specific basis as needed. * The candidate will be responsible for conducting daily inspections and surveillances of construction and testing activities and suppliers/manufacturers in accordance with contracts and specifications requirements. The candidate must provide examples of similar experiences and accomplishments and demonstrate effective communication skills.Regular and consistent engagement, participation and promotion of Herzog's Culture and its essential behaviors are a requirement for this position. * Regular and consistent engagement, participation and promotion of Herzog's Culture and its essential behaviors are a requirement for this position. * Regular and predictable attendance and punctuality are a requirement for this position. * Other duties as assigned. Qualifications: * Four-year college degree or equivalent field experience * 5 years of experience in heavy civil and/or track construction, in inspection is preferred. * Certified Construction Quality Control Manager (CQCM) with Corps of Engineers preferred. * Familiar with the Three-Phase Program of inspection. * Knowledge of company quality control program applicable to work. * Ability to determine acceptability and rejectability of work base on assigned criteria. * Previous quality control inspection experience. * Familiarity and knowledge of codes and standards applicable to specific construction activity is expected. QC inspection certifications from DOT, ASQ and other recognized training institutions are preferred * The candidate is also expected to be willing to travel and relocate to fulfill the position's requirements. * Ability to write detailed reports and demonstrated computer skills necessary to access, research, and document results in the electronic medium are expected. * Valid driver's license and favorable driving record. * Strong written and verbal communication skills. * Bilingual is a plus. Pre-Employment Requirements: * Subject to pre-employment background check and motor vehicle report review. * Maintain valid driver's license and endorsements as required per position. * Subject to pre-employment physical, medical evaluation, and drug screen due to the safety sensitive nature of this position. * Successfully complete and maintain any required safety certification and testing on an annual basis. Physical Requirements: The physical demands described below must be met by an employee to successfully perform the essential job functions of this role. This is a non-exhaustive overview of the physical requirements of this job. * Able to walk on uneven surfaces * Occasionally ascend/descend step ladders and/or stairs * Regularly sit and stand for an extended period of time. * Regularly kneel, bend, and squat * Must successfully pass color/vision examinations as required by the position. * Must be able to hear and distinguish auditory signals. * Able to work in conditions with loud noise; work on/around heavy/moving machinery. * Able to work outdoors in all weather conditions (hot, cold, rain, snow, and sleet). Safety: * Herzog is nationally recognized for its excellent corporate safety record which results from all employees at all levels, in all positions adhering to established policies and procedures. Reporting any and all safety violations to your immediate supervisor is a prerequisite for continued employment. Safety diligence by all results in a safe work environment for all. Benefits: * Herzog offers a robust benefits package including medical and dental coverage. The plans are specific to projects and locations. Why Herzog: Founded in 1969, Herzog is headquartered in St. Joseph, Missouri, with a satellite office in Fort Worth, Texas. Over the course of our 50+ year history, Herzog has become a national leader in the construction, operations and maintenance of commuter rail, light rail, streetcar, and freight rail projects. We believe our culture is at the heart of our existence. It is that belief which empowers every member of our professional family to act with purpose and passion as they advance their career throughout their personal pursuit of excellence. Backed by over five decades of experience, Herzog delivers exceptional customer service and elite results. Our success is the outcome of our relentless pursuit of excellence, our passion for our customers, safety without compromise, and a deep-rooted belief in the power of team. We invite you to join us on our journey to excellence as we work to be better today than yesterday and better tomorrow than today. It is the policy of Herzog Contracting Corp. to provide equal opportunity in employment for all qualified individuals regardless of race, color, religion, ethnicity, national origin, ancestry, disability, medical condition, age, citizenship, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, genetic information, military status, veteran status, and any other characteristic protected by law.

Digital Building Components, as part of the DPR Families of Companies is looking for an experienced Quality Control Inspector. Quality Control Inspectors are expected to visually inspect all products going through the factory within their assigned areas. This position is expected to be carried out in a professional, courteous, and non-biased manner, with a “Team” approach. The Quality Control Inspector is also required to create, process, and “upload” documents into the company's database pertaining to all quality processes (which include hard copies if necessary, the use of computers, I pad's, etc. The Quality Control Inspector is expected to inspect product (including components and subcomponents) visually and with the use of aids, including gauges, tape measures, a variety of inspection tools, etc. and finalize/provide a pass/fail outcome on all work. Inspectors are not “production” personnel, and therefore have a separate reporting structure from production and shall not perform any production-related work. Duties and Responsibilities: Work with the quality manager to identify quality issues and help ensure the highest quality product Work professionally with area leads, production personnel, weld technicians (including robots), and “others” to report, address, and document quality issues and concerns. Document and track all quality inspections using electronic reporting app, paper documents, and any other DBC assigned method(s). Read and understand production details and spool sheets Help create and implement the proper quality check(s) utilizing tools Attend any training that aids in job functions (roles and responsibilities) Manage and maintain document creation, flow, distribution, and uploading (which may include digital and hard copies). Aid in training new and existing employees Meet quality inspection requirements to assist in production flow Document review, control and improvement Aid in designing efficient details and design improvements Create a positive, respectful, and productive team atmosphere Participate in leadership training and functions Maintain and provide a clean and organized work environment Dress appropriately for the work performed (and meeting all company safety requirements). Crosstrain and assist Quality Control Inspectors in various areas (including the Finish Shop). Actively promote a safe working environment (as applicable) throughout the entire factory Able to use and read measuring tape, micrometers, calipers, multimeter, and other measuring devices in the performance of their duties. Able to operate electronic devices such as iPhone, iPad, and capable to use Microsoft suite products such as Excel, Word, PowerPoint, Outlook programs, etc. Education and Experience: Strong attention to detail and the ability to read blueprints. 2 to 5 years' experience in QC/QA in a manufacturing or construction environment. Experience with Microsoft Office products to create reports and record data. Ability to work with and assist others to maximize system effectiveness and efficiency. Ability to build positive and effective relationships with co-workers. Effective written and verbal communication skills. Demonstrates a commitment to a safety- first environment. Ability to read various gauges accurately (i.e. tape measurer, calipers and indicators). Ability to work overtime to meet production schedules to include weekend as needed. Required knowledge on tile installation/process and its products since the role is conducting daily inspection of that process within production. Physical Requirements: This job involves: walking and/or standing for up to 10 hrs. per day, bending, climbing, lifting and stretching. It requires the use of hands and fingers to hold, grasp push and lift items. Lifting requirements up to 40 lbs. Dust, noise and heat are common working conditions. Occasional use of cleaning chemicals. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Job Description ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

Job Details Experienced Humble-Shop - Humble, TX Full Time Not Specified Negligible Any Skilled Labor - TradesDescription Our Employee Value Proposition Critical to the production process, the QC Inspector inspects and ensures the quality of welds and dimensional accuracy of work performed by production staff. The QC Inspector uses a high degree of proficiency while utilizing full skills of the trade including knowledge of codes and standards to verify that the final product is free of defects and meets the requirements of the contract documents. To perform this job successfully, an individual must be able to perform each core responsibility satisfactorily. Core Responsibilities Perform a dimensional and visual inspection of shop fabrication, which includes final paint inspections, weld preparations and final welds. Responsible for fabricated materials conforming to drawings, shop standards, specifications and applicable codes. - - Record and maintain in-process and final inspection records for quality assurance and production control. Identify and remedy drawing discrepancies with detailers. Coordinates with customers' inspectors during inspection phases. Inform foremen of defects in fabrication. Assists shop personnel with the interpretation of codes, drawings and specifications Education/Training - Work Experience High School Diploma or equivalent and at least 3 years of related experience. Completion of a verifiable vocational or training program may substitute for one (1) year of experience. Current or prior CAWI, AWS-CWI, SCWI, or CWB in accordance with CSA W178.2 preferred or an individual with training or experience or both in metals fabrication, inspection and testing who is competent to perform the work. Specialized Knowledge - Certificates & Licenses As outlined in the Core Competencies, an individual must have thorough knowledge and an advanced understanding of each competency outlined above in order to carry out the essential functions of this position. Specialized Knowledge is also required in the following areas: Knowledgeable of dimensional tolerances in accordance with the AISC Code of Standard Practice and AWS Structural Welding Codes. Knowledgeable in requirements for inspection of high-strength bolted connections in accordance with RCSC. Language Skills: Ability to read and interpret documents such as Structural Steel Blueprints, safety rules, operating and maintenance instructions, and procedure manuals. Equipment/Tools Knowledge & Skills: may include but not limited to a Tape measure, weld gauges, level, square, & flashlight. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: AWS-CWI preferred. Knowledge of AWS and AISC codes applicable to steel fabrication and erection. Demonstrated knowledge of various methods of weld testing procedures. DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

Job Details Experienced Phoenix-Shop - Phoenix, AZ Full Time Not Specified Negligible Second Shift Skilled Labor - TradesDescription Our Employee Value Proposition Critical to the production process, the QC Inspector inspects and ensures the quality of welds and dimensional accuracy of work performed by production staff. The QC Inspector uses a high degree of proficiency while utilizing full skills of the trade including knowledge of codes and standards to verify that the final product is free of defects and meets the requirements of the contract documents. To perform this job successfully, an individual must be able to perform each core responsibility satisfactorily. Core Responsibilities Perform a dimensional and visual inspection of shop fabrication, which includes final paint inspections, weld preparations and final welds. Responsible for fabricated materials conforming to drawings, shop standards, specifications and applicable codes. - - Record and maintain in-process and final inspection records for quality assurance and production control. Identify and remedy drawing discrepancies with detailers. Coordinates with customers' inspectors during inspection phases. Inform foremen of defects in fabrication. Assists shop personnel with the interpretation of codes, drawings and specifications Education/Training - Work Experience High School Diploma or equivalent and at least 3 years of related experience. Completion of a verifiable vocational or training program may substitute for one (1) year of experience. Current or prior CAWI, AWS-CWI, SCWI, or CWB in accordance with CSA W178.2 preferred or an individual with training or experience or both in metals fabrication, inspection and testing who is competent to perform the work. Specialized Knowledge - Certificates & Licenses As outlined in the Core Competencies, an individual must have thorough knowledge and an advanced understanding of each competency outlined above in order to carry out the essential functions of this position. Specialized Knowledge is also required in the following areas: Knowledgeable of dimensional tolerances in accordance with the AISC Code of Standard Practice and AWS Structural Welding Codes. Knowledgeable in requirements for inspection of high-strength bolted connections in accordance with RCSC. Language Skills: Ability to read and interpret documents such as Structural Steel Blueprints, safety rules, operating and maintenance instructions, and procedure manuals. Equipment/Tools Knowledge & Skills: may include but not limited to a Tape measure, weld gauges, level, square, & flashlight. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: AWS-CWI preferred. Knowledge of AWS and AISC codes applicable to steel fabrication and erection. Demonstrated knowledge of various methods of weld testing procedures. DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-IF1

JobID: 8665 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-IF1

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

The Quality Control Inspector supports Cooper Steel of Virginia's goals, values, and philosophy by exhibiting the following behaviors: excellence, quality service, commitment, and accountability. As a member of the Cooper Steel team, performance includes demonstration of the following accountabilities: communication, teamwork, job knowledge and leadership. The Quality Control Inspector is responsible for checking and inspecting welds and fabrication processes in accordance with the AISC Standards. This position is also responsible for completing audits and necessary paperwork. PRIMARY DUTIES AND RESPONSIBILITIES include the following: Promote a strong quality culture throughout the company maintaining Cooper Steel of Virginia's core priorities: Safety, Quality, Production Interpret blueprints to fabricate structural steel Determine the appropriate welding equipment or method based on requirements Set up components for welding equipment in accordance with specifications Align components using tape measure and squares Weld components using semi-automatic welding equipment in horizontal and flat positions Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety Work with minimal supervision to complete work tasks assigned Provide evaluations and recommendations on performance of systems and operations Assist and Estimate hours on new job based on shop capabilities Work in observance of OSHA and NIOSH safety standards Other duties as assigned SUPERVISORY RESPONSIBILITIES No supervisory responsibilities QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE High School Diploma or equivalent Working Knowledge and comprehension of AWS D1.1 CWI PREFERRED Prior experience in a similar role is preferred Must have welding experience (flux-core, MIG weld) OTHER SKILLS Strong functional and technical skills; ability to communicate effectively with a diverse range of individuals; good judgment; strong attention to detail; ability to work effectively with others. While performing certain duties of the job, the employee is required to stand, stoop, bend, twist, lift, pull, and reach. Use of hands for gripping and grasping required. Specific vision abilities are required. Lifting is required up to 75 lbs. Must be flexible in hours worked and willing to work overtime. WORK ENVIRONMENT Position performs work mostly in the Shop setting which includes a variety of working conditions. These include the following conditions: noise level fluctuations from moderate to high, use of personal protective equipment, machine/equipment use. Position involves everyday risks or exposure to elements that require safety precautions. Position will be required to work in adverse weather conditions such as heat, humidity, cold, precipitation, etc. Cooper Steel is an equal opportunity workplace and an affirmative action employer. All applicants will be considered for employment without regard to race, color, religion, sex, gender identity, national origin, veteran status, disability status, or any other factors. All employment is decided based on qualifications, merit, and business need.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-IF1

US-MA-Boston Type: Regular Full-Time # of Openings: 1 The LiRo Group Boston MA We are currently seeking an experienced Fireproofing/Firestopping Inspector for the Boston, MA area Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities Inspecting Fireproofing thickness and perform pull testing in Buildings and structures. Inspecting Firestopping installations Ensuring the correct application & installation of fireproofing systems Documenting inspection results Qualifications Past Firestop Experience Knowledge of all Firestop materials and codes. Effective organization, communication, and leadership skills ICC Spray Applied Fireproofing ICC Firestopping Inspector Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. We offer a competitive salary commensurate with experience, a comprehensive benefits package and a positive work environment. The LiRo Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 PI8db320160233-26***********5

Job Details Duffield - Duffield, VA Full TimeDescription Responsible for support for the Concrete, Assembly, Framing/Patch, and Paint department's inspections as assigned on shelters. Responsible for assuring the department's complete rework and issues illustrated on write-ups from inspections. Essential Duties: Troubleshoot for present or potential problems Handle assigned inspections Know and understand all aspects of VFP's work assigned to you Working with Engineering and Production to resolve problems Make precise, detailed documentation Inspect incoming material from vendors used in the concrete department for manufacturing shelters Perform other duties as required by supervisor and/or manager Qualifications KNOWLEDGE, SKILLS, AND ABILITIES Excellent oral and written communication and interpersonal skills Demonstrated ability to coordinate a high level of activity under a variety of conditions and constraints EDUCATION AND EXPERIENCE Able to read blueprints Able to read a tape measure Simple math additions and deductions Minor computer skills a plus

Job Details Duffield - Duffield, VA Full TimeDescription Responsible for final inspections in electrical and other departments as applicable, on assigned shelters prior to shipment to customers. Responsible for assuring departments complete rework and issues illustrated on write-ups from inspections. Essential Duties: Troubleshoot for present and/or potential problems Perform all electrical inspections Perform some mechanical inspections Assist with all department inspections, as assigned Must be familiar with and have the ability to perform all aspects of VFPs electrical duties/tasks Work with Engineering and Production to resolve problems Interface with customers having issues/concerns Create and maintain precise and detailed documentation Perform other duties as assigned Qualifications Two (2) or more years experience with the NEC (National Electric Code) or equivalent Two (2) or more years experience with fire suppression systems and HVAC (heating, ventilations, and air conditioning) or equivalent Excellent verbal/written communication and interpersonal skills Demonstrated ability to coordinate a high level of activity under a variety of conditions and constraints Ability to read blueprints