Mechanic jobs in Bethesda, MD - 2,569 jobs

Academy Bus is seeking an experienced Class A Diesel Bus Mechanic for our Capitol Heights, MD location. Must have experience working on Van Hool, Temsa, and Prevost Buses. Familiar with Cummins and Detroit engines. Must have experience troubleshooting issues with Electrical & Engine diagnostics on Buses with a laptop, i.e. Detroit, Allison, Cummins. Must have own tools. Earn $34.00-$42.00 per hour, based on candidate experience level. Responsibilities: Diesel Mechanic - Class A / Level 1 Repair, troubleshooting and diagnosis of modern tour bus engines and transmissions Reconditioning, preventative and routine maintenance Inspections and road tests Warranty and repair documentation Diagnosis, inspection, installation, disassembly and cleaning of components such as: Diesel engines, electronic systems/motors/controls, drive line components, tires, bearings, brake systems, seals, radiators, water pumps, coolant hoses, alternators, regulators, steering components, oil/air filters, door assemblies, controls, belts, pneumatic valves, cables, and linkages, radiators, heating, air conditioning, alternators, generators, voltage regulators, suspensions, seating, steering, and glass. Respond to road calls General welding/fabrication Train and supervise B/C Level Mechanics and maintenance staff Requirements: Must have experience working on Van Hool, Temsa, and Prevost buses Must be familiar Cummins and Detroit engines Must have AC Certification Proven ability to use hands tools, power tools, hydraulic jacks, pullers, VOA instruments, reamers, vacuum and compression pumps, welding equipment, and testing instruments Proficient in the use of diagnostic devices such as: DDEC readers, ATEC readers, SmarTire, schematics, AIC (Freon) recovery and charging equipment Valid driver's license Basic computer skills Ability to pass pre-employment background check and drug screen CDL License with Passenger and Airbrake endorsement is a plus but not required, willingness to obtain a CDL License through our in-house training department is also desirable Health Insurance and Benefits Offered Include: Medical, Dental, Vision, Prescription, and Life insurance Supplemental coverages 401K plan Paid time off Paid holidays Academy is EEO Diesel Mechanic, Bus Mechanic, Motorcoach Mechanic, Motorcoach Bus Mechanic, Diesel Technician, Bus Technician, Motorcoach Technician, Motorcoach Bus Technician, Diesel Bus Technician, Diesel Motorcoach Technician, Diesel Motorcoach Bus Technician, Diesel Mechanic, Diesel Bus Mechanic, Diesel Motorcoach Mechanic, Diesel Motorcoach Bus Technician, Class A Mechanic, Class A Diesel Technician, Class B Mechanic, Class B Diesel Technician, Class C Mechanic, Class C Diesel Technician. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The A&P Mechanic - Boeing 737-MAX 8 BBJ is responsible for performing high-level maintenance, inspections, troubleshooting, and repairs on the Boeing Business Jet (BBJ) MAX 8 aircraft. This position supports a VIP/ VVIP aviation environment that requires exceptional technical expertise, meticulous attention to detail, and the highest standards of safety, confidentiality, and professionalism. The ideal candidate has advanced experience with the 737-MAX platform, knowledge of BBJ-specific systems and modifications, and the ability to maintain both airframe and cabin systems to meet elevated customer expectations. Key Responsibilities Aircraft Maintenance & Repair Perform scheduled and unscheduled maintenance on the 737-MAX 8 BBJ, including A/B checks, cabin systems maintenance, and BBJ-specific modifications. Troubleshoot and repair MAX-series systems, including advanced avionics, fly-by-wire spoiler systems, LEAP-1B engines, and modernized electrical architecture. Conduct inspections and repairs on high-end interiors, cabin management systems (CMS), entertainment systems, lighting, galley equipment, and VIP-customized installations. Execute component replacements, SB/AD compliance, structural repairs, and configuration-controlled cabin changes per BBJ documentation. Support AOG recovery and rapid-response troubleshooting in remote or international locations as needed. Regulatory Compliance & Documentation Ensure all maintenance actions comply with FAA regulations, company procedures, and BBJ-specific maintenance programs. Accurately document work performed in digital maintenance tracking systems and aircraft logbooks. Review and apply Boeing AMM, BBJ CMP, SRM, IPC, WDM, and service bulletins. Coordinate with Quality Assurance for inspections, major repairs, and return-to-service authorization. Inspection, Diagnostics & Troubleshooting Perform detailed inspections of airframe, powerplant, avionics, and high-touch cabin systems unique to BBJ configuration. Utilize advanced diagnostic equipment and built-in test systems (BITE) to identify and resolve MAX 8 discrepancies. Conduct borescope inspections on LEAP-1B engines, APU troubleshooting, and avionics system evaluations. VIP Cabin, Interior & Special Systems Support Maintain and repair VIP furnishings, luxury materials, cabinetry, and premium finishes. Troubleshoot and support Cabin Management Systems (CMS), satellite communications, Wi-Fi, Blu-ray/AV systems, and aircraft internet hardware. Work closely with flight crews and cabin staff to ensure the aircraft meets VVIP standards of comfort and functionality. Safety, Quality & Operational Excellence Uphold the highest levels of safety, confidentiality, and customer service expected in VIP aviation environments. Support continuous improvement of maintenance processes, reliability programs, and long-term fleet health monitoring. Maintain a clean, organized workspace and strictly follow OSHA, company, and regulatory safety protocols. Coordinate with operations, flight crew, engineering, and supply chain for aircraft readiness and mission reliability. Required Qualifications Valid FAA Airframe & Powerplant (A&P) Certificate. 3-5+ years of experience maintaining Boeing 737 platforms, ideally the MAX series. Strong experience with: Boeing Business Jet (BBJ) interior and cabin systems LEAP-1B engines and MAX-series avionics Digital maintenance platforms (AMOS, TRAX, CMP, or equivalent) VIP cabin repairs, CMS systems, and premium interiors Ability to read and interpret Boeing technical data, BBJ CMP manuals, engineering drawings, and wiring diagrams. Capable of working in high-standards VIP or corporate aviation environments. Must possess an active Secret (or TS/SCI) security clearance or be eligible to obtain one. Preferred Qualifications Boeing 737-MAX or BBJ GenFam / Maintenance Training Certification. Prior experience with VVIP fleet operators, corporate aviation, charter, or government executive transport. FCC License, NCATT or avionics endorsements, or AET certifications. AOG experience with international travel capability. Strong understanding of cybersecurity and data sensitivity for VIP aircraft systems. This position does not offer relocation assistance; local candidates are preferred. Core Competencies Extreme attention to detail and craftsmanship High professionalism and discretion Strong troubleshooting and diagnostic capability Excellent communication and teamwork Ability to adapt in high-tempo VIP operations Customer-service mindset for VVIP standards

Job Title: Packaging Mechanic Overview: The Packaging Mechanic plays a crucial role in ensuring smooth operations by performing setups and maintenance tasks on assigned production lines. This position requires in-depth knowledge of each component in a bottle packaging line, the correct setup, connection between components, and efficient completion of changeovers. The ideal candidate can operate multiple machines simultaneously and perform maintenance on various equipment within the bottle packaging area, including bottle unscramblers, tablet counters, cappers, labelers, and case packers. Key Responsibilities Perform moderate to complex adjustments, maintenance, and repairs on packaging and pneumatic equipment. Conduct machine changeovers, troubleshoot mechanical and basic electrical systems, and make appropriate repairs. Execute daily preventative maintenance on packaging equipment, conveyors, compressors, and assist with equipment installations. Complete work orders for machinery repairs, interpret equipment manuals, diagnose issues, replace or repair parts, test, and adjust equipment. Utilize hand and power tools, electric meters, and material handling equipment in daily tasks. Set up full line configurations independently, identifying and reporting any faulty operations or defective materials. Ensure compliance with company policies, cGMPs, ethical practices, and SOPs, completing documentation such as operation logs and batch records accurately. Perform quality inspections during operations, adhering to product quality standards, and execute all required sampling and testing. Train and guide Packaging Operators in safe and effective machine operation, including breakdown and sanitation tasks. Adhere to proper gowning and hygiene as per SOPs and cGMPs, promoting a safe work environment by following all safety protocols. Support other mechanical or maintenance needs as required and maintain regular, punctual attendance with flexibility for extended hours and occasional weekend overtime. Additional Responsibilities Perform additional job-related tasks as assigned by management. Requirements Education and Experience: High school diploma or GED equivalent. Minimum of 2 years of experience in mechanical maintenance of bottle packaging lines, including troubleshooting, repairs, setup, and disassembly. 2+ years of experience in nutraceutical, supplement, food, or pharmaceutical manufacturing in a maintenance mechanic role for bottle packaging lines. Knowledge, Skills, And Abilities Ability to work effectively in a team environment, read and interpret blueprints, schematics, manuals, and work orders. Proficient in using measuring equipment like micrometers, calipers, scales, and Volt/Ohm Meters. Familiarity with cGMP and OSHA standards; strong mechanical aptitude for machine repair and troubleshooting. Basic English reading and writing skills, with PLC knowledge being an added advantage. General proficiency with PCs. This role requires a mechanically inclined individual capable of ensuring optimal operation of packaging machinery while maintaining the highest standards of product quality and safety. Send us an email to *********************** and tell me why you're interested.

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) - Preferred Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.82 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Flexible schedule Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Location: Washington, DC Metro Area (DC | MD | VA) (Relocation Assistance up to $10,000 Available) Job Type: Full-Time Pay Rate: $40$50 per hour (based on experience) Benefits: Flexible Scheduling Options, Health & Life Insurance (Medical, Dental, Vision), PTO, Paid & Floating Holidays, 401(k) with Matching, Tuition Reimbursement, Short- & Long-Term Disability, License Fee Coverage, Travel Pay About Us Were an elevator company serving the DC metro area and the greater areas. Our reputation is built on responsive service, high-quality workmanship, and a commitment to safety. Were looking for a skilled and motivated Elevator Mechanic to join our team and take the lead on projects ranging from routine maintenance to full installations. Your Role As an Elevator Mechanic, you'll be responsible for servicing, repairing, installing, and modernizing elevator systems in commercial buildings. Youll work independently or as part of a small team to ensure safe, reliable, and code-compliant operation of all systems. Key Responsibilities Troubleshoot and repair electrical, mechanical, and hydraulic elevator systems. Perform preventive maintenance and safety inspections. Install and modernize elevator systems according to design specs and code. Respond to service calls and after-hours emergencies as needed. Maintain accurate records of work performed and parts used. Communicate clearly with clients, team members, and supervisors. Qualifications Must have Certified Elevator Technician credential or equivalent. Must know how to read blueprints, schematics, and technical manuals. Must have OSHA 10/30 certification. Must be comfortable working at heights and in confined spaces. Strong troubleshooting and problem-solving skills. Knowledge of local, state, and national elevator safety codes. Valid drivers license and reliable transportation. Compensation & Perks Hourly Rate: $40$50/hour depending on experience and skill level Company vehicle or vehicle allowance (based on role) Overtime opportunities available Growth potential in a stable, high-demand trade Housing near the worksite (if needed) Flexible work week scheduling, health benefits, PTO, and retirement plan options How to Apply If you're a skilled elevator mechanic looking for a great team, steady work, and room to grow, wed love to talk to you! Job Type: Full-time Pay: $40.00 - $50.00 per hour Expected hours: 40 per week Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible schedule Health insurance Life insurance Paid time off Professional development assistance Tuition reimbursement Vision insurance Work Location: In person

Job Description About Us: Form Services, Inc (FSI). is proud to have been serving the construction industry in the Mid-Atlantic Region for over 60 years. We provide the latest supplies, equipment, and an expert team ready to assist with any building needs. FSI provides professional contractors with quality products, unparalleled service and the most cost-effective solutions for their Concrete Forming needs. We're currently seeking a skilled and dedicated Warehouse Mechanic to join our team and play a crucial role in keeping our warehouse operations running smoothly. Job Summary: As a Warehouse Mechanic, you will be responsible for inspecting, maintaining, and repairing machinery, forklifts, and other warehouse equipment. You'll work closely with the warehouse team to ensure all equipment operates safely and efficiently, supporting our commitment to excellence and workplace safety. Key Responsibilities: Inspect, diagnose, and repair forklifts, pallet jacks, conveyor systems, and other warehouse machinery. Perform routine maintenance, including oil changes, filter replacements, and lubrication. Troubleshoot mechanical, electrical, and hydraulic issues. Follow OSHA guidelines and ensure compliance with safety standards and company policies. Develop and execute a preventative maintenance schedule. Maintain accurate records of all maintenance and repair work. Monitor and manage inventory of spare parts and tools, ordering replacements as needed. Collaborate with warehouse staff to identify and prioritize repairs. Provide guidance to team members on proper use and care of equipment. Qualifications: High school diploma or equivalent; technical certification or vocational training in mechanics is a plus. Proven experience as a mechanic, preferably in a warehouse or industrial setting. Strong knowledge of forklift and machinery repair, including hydraulic and electrical systems. Ability to read technical manuals and schematics. Proficiency in using diagnostic tools and repair equipment. Excellent attention to detail and commitment to safety practices. Physical ability to lift heavy parts and work in various warehouse conditions. Physical Requirements: Stand, walk, bend, kneel, crouch, and climb for extended periods. Lift, push, pull, or carry up to 50 pounds regularly and up to 75 pounds occasionally. Work at heights using ladders or lift platforms. Tolerance for working in varying conditions, including exposure to heat, cold, dust, and noise. In addition to a stable, safe working environment, we offer our full-time employees competitive compensation and excellent benefits including Medical, Dental, Vision, Life Insurance/AD&D, and Union Membership. Form Services, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability.

Ensure all tasks assigned are completed in accordance with manufacturer's manuals and FAA accepted or approved data Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company's, FAA Approved Continuous Airworthiness Maintenance Program Interpret aircraft technical manuals, and electrical drawings Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor Maintain work area in a neat, clean and safe condition at all times Perform only those tasks for which proper training and qualification has been obtained Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed Perform other duties as assigned

Forklift Mechanic - Linthicum Heights, MD | Full-Time | Monday-Friday $40-$45 Hourly We are a powerhouse, family-owned leader in material handling service - and we're expanding. Right now, we're searching for one top-tier Forklift Mechanic who's ready to step into the best opportunity of their career. What We Offer health, dental, and vision plans + company-paid life insurance 401(k) with aggressive company match Generous PTO, paid holidays, and paid training Clean, modern facility with the latest diagnostic tools and lifts Your Day-to-Day Diagnose and conquer complex repairs on electric, LPG, and diesel forklifts Master hydraulics, electrics, transmissions, and drive systems Perform OSHA-compliant PMs and inspections Mentor younger techs and run your own service calls when you're ready What You Bring Proven, hands-on forklift or heavy equipment experience Certifications in forklift or heavy equipment repair Strong understanding of hydraulics, engines, transmissions, and electrical systems and schematic-reading skills Clean driving record and professional demeanor Your own professional tools If you're the tech everyone else calls when they're stuck, we want you. Compensation: $40.00 - $45.00 per hour

EMCOR Services CES has an immediate need for a HVAC Journeyman Mechanic in Washington, DC. The HVAC Mechanic trouble shoots, repairs, installs, and performs preventative maintenance on all the HVAC systems within the Central Utilities Plant (CUP), and other buildings related to the contract by performing the following duties. This is a journeyman position and requires mechanical, electrical, and plumbing aptitudes. This is a part time position. The hours are 9:00 AM to 9:00PM Saturday and Sunday and Holidays. This position is covered by the CBA for Local 99. #EGS #LI-NS1 Essential Duties and Responsibilities: Monitors safe and efficient operations of HVAC/refrigeration systems in accordance with departmental requirements; corrects deficiencies according to PM/CM and manufacturers specifications. Conducts preventive and corrective maintenance on all HVAC and refrigeration systems, as well as fan coil or dx units, and other equipment as assigned. Installs and services new HVAC/refrigeration equipment. Perform all aspects of repairs to Air Handling Units (AHU) to include filter replacement, bearing replacement, motor replacement, belt replacement and proper alignment in accordance to OEM procedures. Coordinates inspections, repairs and installation in consultation with staff in affected areas to minimize disruption of operations. Complete Work Order and Preventative Maintenance (PM) paperwork in a timely and professional manner. Participates in the computerized maintenance management system for work and equipment documentation Participate in the building management system. Monitor design parameters for status and efficiency. Assist in programming recommendations for the system. Track refrigerant loss, procurement, and storage per government standards. Install, maintain and repair all field devices for the Temperature Tracking System. Participate in the testing of HVAC shutdown by duct smoke detectors. Performs heating, ventilation, and air conditioning (HVAC) maintenance on air conditioning units, fans, air handlers, water heaters, converters, duct work and system controls. Request assistance from plumbers, painters, electricians, carpenters, and Building Engineers when necessary. Coordinates inspections, repairs, and installation with staff and tenants in affected areas to minimize disruption of CNRIC operations. Ensures compliance with department safety and quality standards to optimize effective utilization of resources and productivity. Follow and implement standard Lock Out Tag Out procedures. Complete Corrective Maintenance and Preventive Maintenance (PM) work orders in a timely and professional manner. Attends weekly Tool Box safety meetings Obtain OSHA 10 General Industry Safety and Health certification. (EMCOR provided training) Qualifications: At least there (3) years of applicable experience. Must have a current Journeyman HVAC License Must have a current Universal CFC License. Must possess a valid Driver's License. Experience with Microsoft Office Must complete an OSHA 10 General Safety and Health training class (supplied by EMCOR). Must be able to read and understand architectural and mechanical drawings. Must be able to read and understand manufacture's submittals and literature. Review and provide recommendations to preventive maintenance inspections and procedures. Must be able to specify and order material and replacement parts for equipment as necessary. Must be able to understand and implement infectious control policies and procedures. Must be able to work a schedule of 9:00 AM to 9:00 PM Saturday and Sunday and Holidays. This position will require the successful candidate to show proof of a complete COVID-19 vaccination. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee is frequently required to stand. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee maybe exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; cold and heat; risk of electrical shock and vibration. The employee is occasionally exposed to the risk of radiation. The noise level in the work environment is usually moderate. Compensation: $43.39 per hour Other Compensation: NA Benefits: Health and Welfare Benefits consistent with the Collective Bargaining Agreement Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

General Job Information There is only one city in the country that can say it is the Nation's Capital - Washington, D.C. Given that distinction, The Metropolitan Police Department is the premiere law enforcement organization in the city. We receive over 22 million visitors a year, have almost 700,000 residents, and 21,000 private business. The Department consists of more than 4,200 members: approximately 3,550 sworn members and over 650 civilian employees. We are one of the most diverse and highly trained departments in the country. We have the honor of safeguarding and protecting not only our nation's residents, but also people from all over the world. The Metropolitan Police Department (MPD) offers an attractive benefits package. The benefits package includes competitive compensation, health insurance, prescription drug coverage, dental, vision, short and long term disability and life insurance, as well a strong retirement benefit and savings options. Employees are also eligible for our employer contributed 401a plan after one year of employment. Additional perks such as discounts on wireless carriers, gym memberships, amusement park tickets and much more! Additional information can be found at: DCHR Benefits This position is located in the Metropolitan Police Department (MPD), Homeland Security Bureau (HSB), Special Operations Division (SOD), Air Support Unit (ASU). The ASU maintains and certifies all aircraft for suitability. The primary purpose of this position is to ensure the air worthiness of departmental aircrafts by performing a wide array of work involving aviation maintenance and repairs. This Aircraft Mechanic position is covered under the National Association of Government Employees (NAGE) bargaining unit and you may be required to pay an agency fee through direct payroll deductions. The incumbent will be responsible for the following: * Ensures the airworthiness of MPD aircraft, including disassembly, repair, overhaul, inspection, and modification of helicopters, to include major assemblies, sub-assemblies, components, and related systems. * Monitors and ensures compliance with all inspections and airworthiness directives as required by the Federal Aviation Administration (FAA) and the aircraft manufacturer. * Conducts inspections, diagnoses malfunctions, and troubleshoots to determine aircraft malfunction and other technical problems. * Performs operational checks of systems using external power sources, powered ground equipment or functional tests. * Removes, disassembles, inspects, repairs, adjusts, overhauls, modifies, reassembles, and installs or replaces major assemblies, sub-assemblies, components and systems, such as, hydraulic pump assemblies, main and tail rotor assemblies, drive shafts, transmissions, gearboxes, and other powertrain units, cooling fan assemblies, control valves, etc. Installs, connects and adjusts fuel, electrical and hydraulic systems. * Applies theory, operation, and integration of all mechanical, hydraulic, electrical, and other operating systems to troubleshoot malfunctions from pilots and flight crew reports of any discrepancies; as well as from observations during inspections and run-ups. * Applies the start up, operation, shutdown, and emergency procedures for the systems and the aircraft to determine symptoms of normal and abnormal operation, inter-relationships between operating systems, and any applicable safety procedures to prevent damage to equipment or injury to personnel. * Interprets technical data and guidelines, makes recommendation for additions to guidelines and the safety and housekeeping of the aircraft and work area; recognizes unsafe maintenance conditions and grounds aircraft when appropriate. * Installs and aligns fuselage and airframe parts; builds up, balances, aligns, and installs main and tail rotor assemblies. Performs temporary and permanent repairs to airframes and operates ground-handling equipment to move aircraft around the work and flight line areas. * Determines when to assign aircraft to the vendor for repairs and replacements; performs a quality assurance check to ensure that work is done correctly and aircraft is ready to return to service. * Accompanies the ASU crew to outside maintenance facilities when needed. * Performs pre-flight, daily and post-flight inspections and conducts operational checks on aircraft systems, to include accompanying pilot on test flights of aircraft to make visual and audio checks of the aircraft. Performs operational ground checks, makes final adjustments, tracks main and tail rotor blades, adjusts the pitch of blades, checks oil, fuel pressure, and vibration and makes required adjustments as necessary. * Attends all mandatory aircraft inspection and repair training. * Performs other related duties as assigned. Qualifications * Skill and a thorough knowledge of the make-up, operation, interrelationships, and installation of a variety of rotary wing aircraft systems, assemblies, structures, and surfaces. * Skill to diagnose malfunctions throughout these systems, assemblies, and surfaces and determine whether repair or replacement is needed. * Experience as a technical expert and authority as a helicopter mechanic. * Skill in the removal, replacement, and adjustment of various systems, assemblies, surfaces, or any components/parts, and in functional testing. * Skill in the use and readout of powered ground equipment, test stands, and cockpit instruments and gauges. * Skill in the use of tools common to the aircraft trade to determine the extent of repairs. * Experience in aircraft malfunctions and technical problems troubleshooting. * Skill in connecting, meshing, aligning, and adjusting the surfaces, assemblies, and systems with one another. * Proficient in the use of Tracware, Access Software AIRPAX, maintenance record software CALM, and aircraft log manager; Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Licensures, Certifications and other requirements Successful completion of a training program in airframe and powerplant mechanics, or similar, through the Federal Aviation Association (FAA) is required. FAA Certified Mechanic in Airframe and Powerplant is required. Education Bachelor degree in a related field of study, preferred. Work Experience Three (3) years of relevant experience in Turbine Helicopter maintenance and repair is required. Work Environment Work is performed in varied settings and environmental conditions associated with flight line/airport/heliport/off base operations. Dirt, grease, and dust are often present. Aircraft fluids, such as oil and hydraulic fluids may irritate the eyes or skin. Flight line aircraft maintenance duty is inherently dangerous, and requires adherence to safety procedures. Mechanics are subject to cuts, bums, electrical shocks, strains, etc. Subject to exposure to high frequency and high-intensity noises that require wearing hearing protection. Other Significant Factors Promotion Potential: No Known Promotion Potential This position operates within the confines of a 24/7 operation. Incumbent of this position is required to provide after-hours on call technical support including weekends and holidays. Incumbent may also be subjected to rotating shifts, weekend work and changes in days off. This position is deemed as "Safety Sensitive" pursuant to Chapter 4 of the D.C. Personnel Regulations, in addition to the general suitability screening, individuals applying for or occupying security sensitive positions are subject to the following checks and tests: * Criminal background check; * Traffic record check (as applicable); * Consumer credit check (as applicable); * Reasonable suspicion drug and alcohol test; and * Post-accident or incident drug and alcohol test. A background investigation is required for positions with the Metropolitan Police Department. The incumbent is required to possess and maintain a valid motor vehicle operator's permit. The District of Columbia Government is an Equal Opportunity Employer: all qualified candidates will receive consideration without regard to race, color, religion, national origin, sex, age, marital status, personal appearance, sexual orientation, gender identity or expression, family responsibilities, matriculation, political affiliation, genetic information, disability. Sexual harassment is a form of sex discrimination, which is also prohibited. In addition, harassment based on any of the above-protected categories is prohibited. Click here to review additional information Employee Disclosure & Information for Applicants

This position is HYBRID with 50% to 75% travel. This hybrid role requires the employee to reside within 50 miles of one of the following locations: Washington, DC; Albany, NY; or West Virginia. Who We Are: Headquartered in Washington, DC, Versar Global Solutions provides full mission lifecycle solutions for challenges faced by our government and commercial Customers in the natural, built, and digital environments. With nearly 2,000 team members around the world, and a rich legacy spanning more than 70 years, Versar Global Solutions delivers a broad array of planning, analysis and risk management solutions, project and program management, operations and maintenance services, and information technology applications for environmental management and remediation projects, mission critical facilities and installations, and in support of readiness and contingency operations. Who You Are: Versar is seeking Liquid Fuels Mechanics with knowledge and experience to support Versar Global Solutions' team performance on assigned United States Army Corps of Engineers (USACE) Recurring Maintenance and Minor Repair (RMMR) task orders. This position performs site maintenance tasks related to fuel systems, such as identifying and troubleshooting fuel systems discrepancies, minor construction activities, preventative and corrective maintenance, and repair projects. The individual will serve under the direction of the RMMR Site Manager with duties that include performing all phases of work; working with several subcontractors or support staff; ensure compliance with all applicable construction codes, standards, and local regulations; ensuring on-site quality control and on-site safety requirements are met; responsible for all onsite and contractor-controlled documentation. *This position is contingent upon award. What You'll Do: Perform routine maintenance inspections at various U.S. military locations in the continental United States, through anticipation and planning of recurring maintenance activities. Troubleshoot, repair, and maintain Class I, II and III hydrant systems including other supporting equipment and appurtenances. Maintain fuel storage tanks, including inspection reports of the operations for unusual circumstances to include pressure changes, leaks, corrosion, etc. Support development of scopes of work for repair and modification Service Orders for Department of Defense (DoD) Fuel facilities as part of the USACE RMMR program. Repairs will be developed in accordance with UFC 3-460-01 “Design: Petroleum Facilities,” American Petroleum Institute (API) Standard 650 “Advanced Tank & Construction,” and applicable Unified Facilities Guide Specifications (UFGS). Diagnose and correct problems using test equipment, statistical, equipment history, manufactures specifications, and industry-related standards to avoid fuel spills or fuel facility related events. Review repair specifications of equipment or components being purchased or fabricated for repair and construction projects, to ensure compliance with contractual requirements and material specifications. Procure material required by repair or maintenance work. Maintain records relating to maintenance. Document and report all activities in a centrally managed maintenance management system. Maintain good working relationship with coworkers and military management personnel utilizing good judgment in recognizing scope of authority. Investigate and adjust customer complaints and concerns regarding fuel systems maintenance. Maintain knowledge of military standards, Unified Facilities Criteria (UFCs), EM-385-1-1 Safety and Health Requirements Manual, OSHA, EPA, and other industry standards. Adhere to strictly enforced Health and Safety requirements with the highest quality standards expected. Perform all other duties as prescribed by management. What You'll Bring: Two to five years of experience in liquid fuels maintenance or construction on various types of fuel systems that can include marine loading arms, bulk fuel facilities, hot pit fueling systems, gas station dispensing systems, cathodic protection systems, and leak detection systems. Willing to waive some experience and train the right candidate. High School Diploma/GED Proficient in MS Office suite of tools, including Word and Excel; be capable of uploading daily/weekly field reports with photos to cloud-based information management systems. Ability to use/learn QuickBase, eMaint, MaintainX, Timberland and/or other software programs that manage information and schedules. OSHA 30 and/or HAZWOPER training preferred. CPR/First Aid certified preferred Experience with equipment operation and power tools. Possess working mechanical and electrical equipment knowledge. Must possess and maintain an active and valid driver's license without restrictions. Must be proficient in English, both written and verbal, to ensure effective communication and collaboration. Successful results of pre-employment screenings, including federal background check, MVR, and drug screen. Comply with company drug and alcohol policy. Be authorized to work in the US or will be authorized by the successful candidate's start date. Abilities: Ability to communicate verbally with internal and external clients. Able to exercise good judgment and conflict resolution strategies with client issues. Can work independently and is self-motivated; works well towards timelines and goals. Has the ability to apply minor mathematical concepts, including fractions, percentages, as they apply to practical situations; can conduct problem-solving. Able to react to changing situations and retain effectiveness. Physical Demands: This position requires the individual to ascend and descend ladders, scaffolds, stairs and sometimes work in confined spaces in proximity to loud equipment. Must be able to lift and carry (or otherwise move) up to 50 pounds regularly. Must be able to respond quickly to sounds and dangerous situations, if needed. Must be able to wear personal protective gear most of the day. Must be able to sit, stand, and walk, must have close and color vision, use depth and peripheral vision, and be able to adjust focus. Work Environment: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent field work at construction and client sites will require employee to be exposed to a variety of outdoor weather conditions in fueling facility environments. Employees will wear hard hats, eye protection, hand protection, foot protection and other appropriate safety equipment as needed in the field. Travel Requirements: Frequent attendance at on-site events at designated locations requires the ability to provide reliable transportation and maintain a current, valid driver's license and proof of insurance. Position will require travel at a frequency of 50% to domestic locations. Access to federal installations or other secure facilities will require security badges and employee must be able to obtain basic security clearances. Code of Ethics: All employees are expected to conduct business in an ethical manner and refrain from dishonest or unethical conduct. Employees shall act in a manner which represents their integrity, impartiality and the best interests of the company and its customers. Compensation The salary range for this position varies by geographic location and reflects the minimum and maximum compensation the Company in good faith expects to pay for this role based on market data, internal equity, and the candidate's education, experience, knowledge, skills, and abilities. Washington, DC $52,232 - $58,761 Albany, NY $50,762 - $57,107 Martinsburg, WV $49,158 - $55,303 EEO Commitment Versar Global Solutions is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. Versar Global Solutions complies with applicable state and local laws governing non-discrimination in employment in every location in which the company operates. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Versar Global Solutions expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran. Improper interference with the ability of Versar Global Solutions employees to perform their job duties is not tolerated. #LI-WJ1

Type: Full Time, Non-Exempt Work Schedule: Full-time, Day Shift Compensation: $36.67-$36.67/hr. + $10,000.00 relocation bonus Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of a ASE Master Mechanic at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance Health and Welfare Benefit ($5.85 per hour worked) Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 12 paid days of vacation at the start of employment, paid sick leave Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, as well as our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality and our dedication to providing a safe and respectful work environment to our employees. Tessera is seeking a problem solving and reliable Master Mechanic with a positive attitude. Typical duties include but are not limited to: Diagnosing the source of trouble and determining the extent of repairs required; coordinating the procurement of materials/parts, replacing worn or broken parts such as, but not limited to, engine components, bearing, piston rings, adjusting valves or other engine parts. Rebuilding carburetors, overhauling transmissions; and repairing fuel injection, lighting, and ignition systems; brake systems; steering/suspension systems; exhaust and hydraulic systems; A/C systems. Performing service, inspections, maintenance, repair, and overhaul of equipment to include, but not limited to, wheeled vehicles, track vehicles, engineer equipment, power generation, and material handling equipment, propane, natural gas, electric, gasoline, and diesel engine-powered vehicles, including light, medium, heavy, and heavy equipment trailers. Understand and follow technical manuals, lube orders, wiring and hydraulic schematics to ensure proper diagnosis and repair during non-annual and annual services. Perform major repair jobs by disassembling and cleaning parts, removal, repair and installation of assemblies, and components. Mentor employees and new hires on proper procedures pertaining to shop safety, maintenance practices, and principles and completion of required work order documentation. Coordinate with Lead Mechanic and/or Project Manager regarding the procurement of parts/materials and supplies for ongoing repairs and maintenance. Maintains a clean and safe work area, ensuring building and shop cleanliness on a routine basis. Qualifications: Five (5) years of experience is preferred; specialized vocational, technical or other formal training may be substituted in part for experience. Ability to read, understand, and follow technical manuals to ensure proper diagnosis and repair. Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. Must be able to lift and/or move up to 50 pounds. May be required to reach, kneel, walk, stand and use repetitive motion for several hours at a time based on position duties. Requirements: Required to have own toolbox or tool cart. Valid state CDL-B Driver's License is required with the ability to obtain and maintain coverage by Tessera's insurance carrier. Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

Diesel Mechanic Full Time Hanover, MD Earning Potential up to $65k, based on experience Looking for a new and exciting career? Join the Coach USA/Megabus operations team in Hanover! Dillon's Bus Lines, LLC, Maryland's premier motor coach company, has new and exciting career opportunities for Full Time Diesel Mechanics for its Hanover, MD location under the direct supervision of the Maintenance Manager. Why join with Us? Weekly Competitive Experience Based Pay Rewards & Benefits: Enjoy paid holidays, vacation, PTO, a comprehensive benefits package (including medical, dental, vision, short term disability, life insurance, 401K), Employee Assistance Program “EAP”, Free membership for “Tickets at Work” for exclusive employee deals Wear It Proud: Uniforms provided to get you in the professional spirit. Growth & Development Opportunities: Your career journey is important. We support your growth with training, opportunities to advance and obtaining a CDL. Required Experience: Class A: Master Mechanic with 5 years' experience on trucks, buses, or heavy equipment Class B: Mid-Level with 3 years' experience on trucks, buses, or heavy equipment Diagnose and Repair: Utilize diagnostic tools to identify issues with mechanical, electrical, and other breakdowns and failures, performing necessary repairs. Diesel Engines: Removal, installation, disassembly, and reconditioning of components of diesel engines. Preventative Maintenance: Conduct routine and preventative maintenance according to manufacturers' specifications to ensure vehicle reliability and longevity. What Sets You Apart: Experienced Professionals: You have a solid background in diesel mechanics, with specific experience working on Cummins and Detroit engines. ASE Diesel Certification or associate degree in diesel technology is highly regarded but not mandatory. Problem Solvers: You are adept at troubleshooting and enjoy the challenge of finding and implementing solutions to mechanical issues. Computer diagnostic skills a plus, but training is provided. Team Players: Ability to work in all weather conditions, including outdoors. Willingness to work weekends and holidays, as needed. 2nd or 3rd Shifts Available Based Upon Operational Needs. Experience Counts: Have the necessary toolkit to carry out maintenance duties independently. Experience in the Motor Coach Industry preferred. Safety Champion: Adhere to and champion safety standards to ensure a secure workplace for everyone. To learn more about your next big career change! APPLY NOW! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. ©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"©

Job Description Summary/Objective: The Mechanic is responsible for the proper repair and maintenance of all company vehicles and equipment and for the safe and proper care of equipment assigned to the mechanic. Essential Functions: Maintain and repair automotive vehicles (such as trucks, tractor-trailers, pickups, cars, heavy equipment, and mounted equipment such as mixers and hydraulic systems) and stationary equipment (such as air compressors, welding equipment, and miscellaneous equipment) to company standards; recognize failure symptoms, trouble shoot, inspect, repair or replace, reassemble and test. Coordinate with Manager to ensure the proper parts and supplies are available when needed. Recognize potential problems before they occur and perform or order the necessary repair work. Coordinate with the Manager and other mechanics to get the work done. Complete all required paperwork accurately. Supervise the Mechanic's Helper ensuring that he/she performs all work as required and follows all company policies and procedures. Operate vehicles and equipment in a safe manner at ALL times. Wear all required safety equipment. Follow all safety guidelines and notify the Manager or Safety immediately of any current or potential safety issues. Perform all required inspections. Follow all environmental regulations. Dispose of chemicals, trash, etc. in designated areas. Recycle when required. Notify the Manager immediately of any current or potential environmental problems. Keep the shop area and all tools, shop vehicles, and equipment neat, clean, and in good repair. Clean work area at the end of every work shift. Maintain security of all company equipment and tools at all times. Notify the Manager of any problems. Drive shop vehicle to various plant sites, road calls or other sites of broken equipment. Drive broken and repaired equipment when necessary. Other duties as assigned. Non-Essential Functions: Pick up equipment or supplies. Train other employees. Fill in for colleagues as needed. JOB SPECIFICATIONS Work Environment: Work time will be split between indoors/shop and outdoors/field. Exposure to dust and fumes/offensive smells. Exposure to chemicals such as fuel, grease and oil. Close proximity to moving mechanical parts. Noise level will be moderate to loud. Physical Demands: Lift a maximum weight of 100 lbs., repetitively lift 25 lbs., carry approximately 100 lbs., and push/pull approximately 50 lbs. Reach overhead and reach away from the body, pinching and gripping. Walk 1 hour per day, stand 4 hours per day, kneel 1 hour per day, squat 1 hour per day, climb 1 hour per day, lay on back 2-3 hours per day. ADDITIONAL QUALIFICATIONS Experience: Experience maintaining and repairing diesel engines. Special Skills: Written communication, verbal communication and basic mathematical skills. Basic computer knowledge. Ability to learn and use iPad, iPhone and company software applications. Certifications: Valid driver's license, CDL preferred. DOT certification. ASE certifications preferred. Mack training preferred. Industry Related Experience or Skills: Familiarity with mechanical maintenance of concrete mixers, dump or refuse trucks. Education Required: High School Preferred Education: Vocational or trade school training Bilingual in Spanish Preferred: Yes

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits? Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What's in it for YOU: * Competitive Pay Rates! Starting rate - $33.32/hour * 40 hours a week, not flat rate * OT as needed over 40 hours * Full Benefits: Medical, Vision, Dental, Life, Supplementals (STD, LTD, FSA, AD&D, etc.) and 401K plan * PTO, Paid Vacation and Sick (accrued) * Company provided uniform * (9) Paid Holidays * Maximum Boot Allowance of $250 (per anniversary) * Quarterly Attendance Bonus - If an employee does not rceive more than (2) attendance points during the previous 12 months-earn (1) Attendance Bonus Day. Year (2) you could earn (1) Bonus Paid Time Off Day and (1) Quarterly Attendance Bonus. Also, an employee who receives no attendance points will receive a quarterly bonus of $50. Paid in 1st week of second month following the quarter. * Corporate partner discount program * Career advancement through a national company Duties include, but are not limited to the following: * Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components. * Perform scheduled preventative maintenance of vehicles * Execute major and minor repairs of defective components. * Document all activities in MV's Fleet Management System. * Maintain work environment in an organized and safe condition. Qualifications Talent Requirements: * High school diploma or equivalent. * Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. * Must be able to pass a pre-employment drug screen and random drug testing. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Job Description Sigma Defense is seeking a SME - Autonomous Systems to provide the required support to the Capability Development and Innovation (CD&I) division within the Secretariat for Special Operations under the Office of the Assistant Secretary of War for Special Operations and Low-Intensity Conflict (OASW(SO/LIC)). Equal Opportunity Employer/Veterans/Disabled: Sigma Defense Systems is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Requirements 10+ years of experience. Must be a U.S. citizen. Education Requirements: Bachelor's degree from an accredited college or university in an unspecified field of study. Personnel Clearance Level: Candidate must possess or have the ability to obtain an active TS/SCI security clearance or higher. Clearance may be sponsored for the right candidate. Essential Job Duties ( not all-inclusive ): Support the development of comprehensive Counter-Unmanned Systems (CUxS) capabilities across all warfighting domains. Development will include designing and implementing systems that operate effectively in irregular and denied environments, ensuring adaptability to the most challenging operational scenarios. The work will focus on delivering advanced kinetic and non-kinetic effects, thereby creating asymmetric impacts against hostile unmanned systems. Provide expertise for identifying, countering, and neutralizing unmanned threats, integrating sophisticated technologies and innovative approaches to enhance defensive and offensive operational capabilities. Salary Range: $150,000 - $185,000 annually. Benefits Dental and Vision Insurance Medical Insurance to Include HSA, FSA, and DFSA Plans Life and AD&D coverage Employee Assistance Program (EAP) 401(k) Plan with Company Matching Contributions 160 Hours of Paid Time Off (PTO) 12 (Floating) Holidays Educational Assistance Highly Competitive Salary

Job Description The Mechanic is responsible for performing a wide range of mechanical and diagnostic repairs on vehicles, ensuring all systems operate safely and effectively in accordance with manufacturer specifications. This includes mechanical work related to suspension, steering, braking, alignments, and drivetrain. The ideal candidate will be experienced in vehicle diagnostics and precision alignments, demonstrating strong attention to detail, safety, and quality workmanship. The Mechanic works closely with estimators, technicians, and service advisors to ensure all mechanical repairs are completed accurately, efficiently, and in compliance with OEM and industry standards. ESSENTIAL DUTIES Inspect, diagnose, and repair vehicle mechanical systems including suspension, steering, brakes, drivetrain, and cooling systems. Perform precision wheel alignments and suspension work to restore proper vehicle handling and ride quality. Use OEM and aftermarket diagnostic tools to identify and resolve electrical, mechanical, and electronic control system issues. Collaborate with estimators and collision technicians to identify and verify all necessary mechanical repairs. Perform pre- and post-scan diagnostics to identify hidden damage and confirm successful repair completion. Document all diagnostic findings, repair steps, and calibration results in the repair order system. Maintain up-to-date knowledge of vehicle technologies, systems and repair procedures. Ensure all repairs comply with safety, environmental, and quality standards. Maintain tools, equipment, and work area in a clean, organized, and safe condition. Assist other team members as needed to promote an efficient, team-focused workflow. Perform other duties as assigned by management. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or equivalent required; completion of an accredited automotive technology program preferred. Minimum 3 years of experience in automotive mechanical repair, preferably within a collision repair or dealership environment. Proficiency with OEM and aftermarket diagnostic scan tools and alignment machines. Strong understanding of modern vehicle systems, including braking, steering, suspension, and electronic control systems. Language Skills Ability to read and understand repair estimates and OEM technical documentation. Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Certificates, Licenses, Registrations ASE Certifications and/or OEM-specific mechanical certifications preferred. I-CAR training and certification in mechanical or electronic systems desirable. Annual training required. Valid driver's license and clean driving record required. Physical Demands Ability to perform consistent physical activity such as standing, bending, kneeling, and lifting up to 50 lbs. Must be able to operate various diagnostic tools safely. Work involves exposure to typical shop environments including noise, dust, and vehicle fumes. WORK ENVIRONMENT Our collision center is a fast-paced, team-focused environment that emphasizes quality, safety, and customer satisfaction. Work in a well-equipped and safety-focused shop alongside a collaborative team that values professionalism, communication, and high-quality workmanship.

Human Resources announces a 1.0 FTE Roofer Mechanic. This is a 260-days, M-08 position located at Facilities & Operations. EDUCATION: Completion of tenth grade (preferably completion of high school), including some courses in industrial arts and/or shop mechanics, supplemented by training equivalent to an apprenticeship in the trade. LICENSE/CERTIFICATION: Valid driver's license; NOTE: All APS employees authorized to drive APS vehicles are subject to either Omnibus Transportation Act drug and alcohol testing procedures (if required to possess a CDL) or the Arlington Public Schools Alcohol and Drug testing procedures (if CDL is no required). PHYSICAL ATTRIBUTES: Possession of the strength and dexterity and fine and gross motor skills required to perform all essential functions, including lifting and carrying heavy objects; balancing self, materials and tools on high and/or slanted surfaces; assembling and disassembling scaffolds and equipment; and operating or utilizing all tools, equipment and vehicles. Work requires significant time spent standing, bending, stooping, working in tiring positions, and working from ladders or scaffolds. HAZARDS/UNUSUAL DEMANDS: Work involves working indoors and outdoors under a wide range of climatic conditions. Exposure to harmful fumes and sprays require use of safety goggle masks, gloves and proper ventilation. Work is performed on ladders, scaffolds, and rising platforms to a height of 40 feet. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES (The following may not include all the required skills or duties performed): Knowledge and ability to operate a broad range of power and hand glazier, roofing, carpentry and sheet metal fabrication tools and equipment; Knowledge of the common procedures, materials, hazards and safety precautions associated with roofing, glazing, and related construction activities, and ability to respond appropriately in hazardous situations; Knowledge of national, state and local codes and regulations relevant to trades; Ability to follow and give oral and written instructions, and to read and interpret plans, diagrams, drawings, prints, schematics, etc.; Ability to use arithmetic computations to measure, calculate quantities and cost, etc., and ability to maintain records; Ability to develop and maintain good leadership and interpersonal relationships; Reliable, flexible and dependable ESSENTIAL FUNCTIONS OF THE CLASS (May not include all duties performed not all incumbents perform all essential functions delineated): Performs semiskilled level maintenance, repair, and construction tasks in the glazing and roofing trade; Attends formal courses or performs on-the-job training tasks equivalent to apprenticeship training; Reads and interprets blueprints, sketches, technical instructions and manuals.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************