Mechanic jobs in Boston, MA

• Perform diagnostics, repairs, and preventive maintenance on heavy-duty trucks and waste collection vehicles. The information below covers the role requirements, expected candidate experience, and accompanying qualifications. • Troubleshoot and repair hydraulic, mechanical, and electrical systems. • Conduct welding and fabrication work as needed. • Ensure compliance with safety and environmental regulations. • Maintain accurate service records and communicate with the maintenance team. xevrcyc • Perform additional tasks and duties as required to support overall operations.

Schedule: 2pm to 1030pm w/OT ESSENTIAL DUTIES AND RESPONSIBILITIES Perform preventative maintenance within DOT standards. Complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Take directions from and assist senior technicians with repairs. Utilize fleet maintenance system tablet to fully document equipment repair and parts used. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Willingness and capacity to assume increased responsibility and certifications. Other duties as assigned by manager. SUPERVISION N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: N/A WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Ability to work flexible schedule. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 1 year of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class A CDL license and DOT certification Experience with Maximo fleet maintenance system Previous mechanical and PM program experience Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) BECOME A US FOODS TEAM MEMBER! Your efforts are the foundation that defines US FOODS success based on our pillars of cultural beliefs, work ethic, collaborative spirit, and service. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $35 and $40 per hour. This role will also receive overtime compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: Stay updated by following US Foods on any of our social media platforms at the bottom of the page! ***EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status*** #LI-RS

The Industrial Machine Mechanic will be responsible for the efficient functioning of all maintenance-related activities in a manner consistent with the rules and policies established by Bradford & Bigelow. The Industrial Machine Mechanic is responsible for performing mechanical and electrical troubleshooting, diagnosing and repairing, conducting machine repairs and preventive maintenance. Bradford & Bigelow expects that the Industrial Machine Mechanic will always act to ensure the highest level of personal performance possible, will work to meet or exceed all performance goals, and will help Bradford & Bigelow achieve its mission of being a best-in-class provider in the book manufacturing industry. Essential Job Functions: Perform mechanical and electrical troubleshooting for machinery. Diagnose and repair pneumatic systems. Execute machine repairs and preventive maintenance. Work with control systems and ensure proper functionality. Service motors and gearboxes. Read and interpret electrical diagrams. Rigging equipment for moves. Dependability and reliability with respect to attendance and policy. Job Requirements: Experience in the printing industry is preferred but not required. Over 5 years of hands-on experience in mechanical and electrical troubleshooting for industrial machinery. Open to training and skill development. Bilingual (Spanish) a plus. Physical Requirements: Ability to lift heavy objects, up to 100 lbs. Capable of maneuvering inside or around machines to perform repairs. Ability to bend, crouch, and work in confined spaces for extended periods. Comfortable using hand and power tools. Operate heavy machinery (i.e. fork trucks, lifts, snow removal and lawn care equipment). Ability to tolerate being exposed to loud noises and moving machinery (PPE provided). Education and Experience: High school diploma or equivalent required. The above information indicates the general nature and level of work performed by employees within this classification. It is not a comprehensive inventory of duties and/or responsibilities

We are currently recruiting a full-time Diesel Mechanic. Position offers a competitive salary with full benefit package. Must have (5-8 yrs exp.) This role involves skilled maintenance and repair of all Public Works Department vehicles and equipment, as well as the upkeep of the Town garage. The mechanic works under the general supervision of the Superintendent and Highway Division Foreman, with significant autonomy in decision-making regarding vehicle maintenance and repairs. Responsibilities: Perform skilled repairs and maintenance on gasoline and diesel engines, including engine overhauls, brake and suspension work, electrical system repairs, and clutch replacements Operate and document a preventive maintenance program, keeping detailed records of all work performed on vehicles and equipment Repair power equipment and tools such as compressors, jackhammers, and mowers. Order and manage parts inventory, prepare and maintain repair records, and assist in developing vehicle specifications Operate vehicles for snow removal and sanding during winter, plowing, and perform emergency highway operations as needed. Ensure safe practices in vehicle servicing, maintain a daily log of activities, and update the DPW Computer Maintenance and Management System Benefits: Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance On-the-job training Opportunities for advancement Paid time off Paid training Retirement plan Vision insurance Overtime

A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. Whatyou will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including: • Observing and assisting in installing and repairing auto glass • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing • Providing additional services & products • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques. • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday. • Performs other duties as assigned • Complies with all policies and standards What you'll get: • Competitive weekly pay starting at $23.50/hour, increasing to $27.75/hour after training and certification. • Earn $5/set of wiper blades when added for customer safety. • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days. • Program to buy additional PTO or sell unused time up to 16 hours. • Up to $5,250 annually in tuition reimbursement. • Paid training and all the tools and resources you'll need to be successful. • View all our health, wealth, and life offerings at ************************* Education Qualifications • High School Diploma GED/Equivalent Preferred • Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds. • Ability to stand for extended periods, work in tight spaces, bend and twist body • Ability to use a variety of hand tools and power tools safely and effectively • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting” • Ability to work scheduled days, with flexibility on start and end times to accommodate customer's needs • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues • Problem-solving and ability to trouble-shoot issues, independently and collaboratively • Ability to read, write and interpret the English language and technical directions • Ability to communicate orally (via phone) and written (via computer or other electronic means) • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-JF1 This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we're proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability.

TruckPro is seeking a Diesel Mechanic for Heavy Duty Trucks who will be responsible for repairing medium to heavy duty trucks and all models of trailers to specific customer and industry-standard specifications. Benefits for Diesel Mechanic: Competitive Pay Day Shift Paid Training Employee Referral Bonus Medical, Dental and Vision 401K with company match Paid Time Off NO WAITING PERIOD Paid Holidays Tool Purchase Reimbursement Safety Boot Purchase Reimbursement Company culture grounded in customer service and values its people Diesel Mechanic Responsibilities Include: Perform repairs to customer vehicles and trailers Perform basic welding functions Inform customer/manager of completion times, services expenses, and possible changes Monitor the profit/loss of each job to maximize profitability while maintaining the highest standards of quality; minimize warranty claims and re-work Submit work orders for invoicing Maintain inventory and supplies Prepare list of required replacement parts Clean work area as required and maintain equipment; Adhere to all environmental, health and safety standards Successful Diesel Mechanic Candidates Will Have: Two years of diesel mechanic (truck) experience within the heavy-duty industry Fire Truck Certification(s) and/or willingness to obtain at company expense Automotive Service Excellence certification appropriate to the job or equivalent Possess your own tools and/or the willingness to purchase tools required for the job as you advance in your skill level and responsibilities ( TruckPro offers a tool purchase or reimbursement program ) Ability to lift part up to 50+ lbs Valid driver's license and/or CDL with good driving record TruckPro offers a stimulating workplace based on open collaboration, personal development, and future opportunities. Our continued success thrives on the attraction and retention of spirited people who share our passion for customer service. Physical Requirements: These physical demands are representative of those an associate must meet to be able to successfully perform the primary duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary duties: The role is a physically active role Will be required to lift, pick, pull, and stock heavy duty truck parts that might be in excess of 50+ lbs with lift assist devices Will be required to stand for long periods of time on a variety of surfaces and will be required to operate a forklift Will frequently be required to: walking, bending, twisting, stepping, stooping, reaching, lifting, pushing and climbing Will frequently use a computer in the course of completing daily activities Work Environment: The work environment described are representative of those an associate encountered while performing the primary duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary duties. The associate will be regularly exposed typical inside and outside environmental conditions, including, but not limited to dirt, dust, vibration, minimal chemical hazards, noise and temperature variances Exposure to hazards or physical risks, associated with a warehouse, vehicle services, and retail operations, which require following basic safety precautions E-Verify: TruckPro validates right to work using E-Verify. TruckPro will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. "TruckPro is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or genetic information, or any other characteristic protected by law."

Job Details Type Full Time Education Level Not Specified Salary Range $42.00 - $44.00 Hourly Travel Percentage Road Warrior Job Shift Day Job Category Air Masters Description Air Masters is a well established commercial HVAC company looking for an experienced Licensed HVAC Mechanic. We service Southeastern MA and RI. Our company services and installs and maintains all makes and models of HVAC equipment. This position will be mostly service, it will also include installations of RTUs, Heat Pumps and VRF equipment. Pay will be based on experience and certifications. This position has a significant amount of prevailing wage work. Essential Duties and Responsibilities: Minimum 3 years commercial HVAC service experience Minimum 3 years HVAC system installation experience Motivated and enjoy working in the HVAC industry Journeyman refrigeration license in either MA or RI Troubleshooting and diagnostic skills EPA universal certification Valid driver's license Must possess hand tools Good communication skills High school diploma Skills in controls installation and troubleshooting or a willingness to learn MA or RI Refrigeration (Preferred) Work Environment: This position requires the employee to work both inside and outside. The employee may be subject to loud noises and hot and cold temperatures while on work site. Positions Type and Expected hours of Work: This is a full-time 40-hour position. Days and hours of work are Monday through Friday 8:00 AM to 5:00 PM. Travel:Daily travel to job sites throughout MA and RI Physical Demands: Lifting weight up to and over 75 lbs. in both a vertical and horizontal range of motion. Crawl, stoop, stand, reach (push/pull) & bend to perform necessary work. Able to ascend and descend on extension ladders, step ladders and stairs using feet and/or hands and arms. Able to drive a company vehicle and walk around at job sites. Reading, computer input, typing and answering the phone. Clarity of vision at both over 20 feet and under 20 inches. Able to judge depth (distance & space relationships), have a good field of vision, and identify and distinguish colors. Adjustment of eye to bring object into sharp focus. Outside work Climbing stairs Dusty Environment Navigate uneven terrain Compensation & Benefits: $2,500 Sign- On Bonus Competitive Wages Health care benefits through United HealthCare Delta Dental and Vision Service Plan Significant amount of Prevailing Wage work Company provided Vehicle, Phone, Laptop Paid time off and holidays Employer-matching 401(k) retirement plan Employer-paid Employee Stock Ownership Program (ESOP) Employer-paid life and AD&D insurance; access to short and long-term disability insurance Tuition reimbursement Training and support for field and office staff We promote from within whenever possible Qualifications The RISE Group, Inc. is an E-Verify participant and will conduct background investigations and pre-employment screening of candidates for employment Pre-employment activities will be conducted on qualified applicants after acceptance of a job offer. The RISE Group, Inc. is an employee-owned company and an equal opportunity/affirmative action employer. We welcome applicationsfromall backgrounds regardless of race, color, religion, sex, national origin, ancestry, age, marital status, sexual orientation, gender identity or expression, veteran status, disability, or any other classification protected by law.

*For a quick application text APPLY1 to 82174* *About Dent Wizard* Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. *Interior Repair Technician - No Experience Needed!* Training: Fully Paid (Includes Travel, Food, and Transportation) Commission-based uncapped earning potential. First year earning potential: $50,000-$65,000 Long-term earning potential: $70,000-$110,000+ Are you detail-oriented and enjoy making things look brand new? Do you enjoy working with customers and being on the move? Join our growing team as an Interior Repair Technician and start a rewarding career-no experience required! What You'll Do: * Travel to customer locations (dealerships, auctions, and more) to perform mobile interior repairs * Repair rips, tears, burns, stains, and other cosmetic damage in vehicle interiors * Mix dyes and restore surfaces to like-new condition * Build strong customer relationships and promote our services What We're Looking For: * Strong customer service and communication skills * Detail-oriented with a passion for quality and precision * Comfortable working outdoors in various weather conditions * Manual dexterity for repetitive-motion tasks * Self-motivated with the ability to work independently * Physical ability to kneel, bend, squat, and lift up to 15 pounds * Vision abilities including close, distance, color vision, depth perception, and focus adjustment * Valid driver's license and a good driving record What We Offer: * *No experience necessary - *we provide comprehensive, paid training (includes travel and lodging) * *Unlimited, uncapped earning potential - the harder you work and the more you master your craft, the more you can make* * *Excellent benefits - *medical, dental, vision, 401(k), paid vacation, and more * *Awesome perks - *tools and supplies, company vehicle, gas card, mobile phone, and more * *Cross-training opportunities - *learn to become a Key or Wheel Tech and boost your income * *Independence - *manage your day without micromanagement * *Supportive team - *work with a fun, dynamic crew that's got your back * *Career growth - *advance to higher Tech levels or management roles All candidates selected for offer will undergo post-offer, pre-employment screening appropriate to the role. This may include, but is not limited to, a physical examination, vision assessment, background check, and drug screening. Any such screening will be appropriate for the role, the same for all employees entering the same job category and conducted in accordance with applicable laws and regulations. The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $50,000-$110,000/year We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies [Benefits Highlights Booklet]( *EOE Statement: *Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at ...@dentwizard.com.

As our Maintenance Mechanic you are are to maintain and repair plant equipment to ensure safe and reliable operations while maximizing Overall Equipment Effectiveness (OEE). Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: * Repair and maintain machinery and equipment including: pumps, motors, filling and packaging equipment, conveyors, palletizers, piping, valves, tanks, agitators, drives, gearboxes, and utilities. * Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. * Perform inspections and preventive maintenance to ensure compliance with safety and regulatory requirements as well as to ensure equipment reliability. * Work with filling line operators to efficiently change over line equipment for different label, container, and packaging sizes. * Improve OEE (Overall Equipment Effectiveness) on the filling lines by Pareto analysis of OEE data and implementation of Lean Manufacturing tools to reduce downtime. * Maintain all operating equipment in satisfactory condition. Schedule needed repairs to have minimum interference with operations. Troubleshoot/repair equipment in a timely and efficient manner. * Comply with company safety rules and procedures. Complete daily and shift clean up tasks. * Communicate results/ concerns/ issues with supervisor and co-workers. Ensure shift to shift hand-off is complete. * Support and complete small capital projects. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Required Experience: * 3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing * High School Diploma or equivalent * Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus * Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required * Ability to do basic math. * Accurately enter and retrieve computer data. * Ability to operate machinery * Ability to solve problems in a team environment. * Active participation in our Continuous Improvement Process. * Ability to consistently lift 50 pounds. * Willing to work overtime as required

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel and gasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) - Preferred Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. Pay Range: For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $27.78/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

The Role Strategy and Leadership Design and implement a best-in-class event response framework tailored to re/insurance client needs Serve as the face of Willis / Willis Re's catastrophe event response internally and externally Develop and lead a small, high-performing team of event analysts Set protocols for activating response post-event, coordinating across broking, modelling, and research Operational Delivery Oversee the production of rapid event summary packs, client impact assessments, and market commentaries Develop and operationalise a loss estimation framework, blending vendor models, proprietary analytics, and WRN input Lead and author the Willis Natural Catastrophe Review, enhancing its reach, scientific rigour, and strategic influence External Engagement Represent Willis / Willis Re in client debriefs, industry panels, and media commentary following major events Build strong relationships with cedents, reinsurers, regulators, and modelling partners Support and feed the Willis Re View of Risk with event-derived insight and scenario testing Partner with the WRN to integrate cutting-edge hazard and loss science into workflows Internal Coordination Coordinate with Cat Modelling, Broking, and Analytics teams to deliver aligned, multi-perspective outputs Act as a central point of contact during live events and drive readiness for high-impact periods (e.g., hurricane season) Note: Employment-based non-immigrant visa sponsorship and/or assistance is not offered for this specific job opportunity. Qualifications The Requirements 10+ years of experience in catastrophe risk, either in the (re)insurance industry, catastrophe modeling, hazard science or in a relevant government agency (e.g., NOAA) Proven experience leading event response or catastrophe risk communications Excellent written and verbal communicator, able to represent Willis Re publicly and credibly Demonstrated ability to communicate complex risk to executive and non-technical audiences Desired Attributes Recognised presence in the re/insurance or nat cat science community Experience working directly with clients / markets / external stakeholders on event analysis and broader tends Strong understanding of vendor models (e.g., RMS, Verisk), open-source platforms, and model limitations Skilled in synthesising research, data, and market dynamics into timely, client-ready insights Experience working with academic partners, scientific advisory boards, or research networks a plus Degree in natural science(s) Compensation and Benefits Base salary range and benefits information for this position are being included in accordance with requirements of various state/local pay transparency legislation. Please note that salaries may vary for different individuals in the same role based on several factors, including but not limited to location of the role, individual competencies, education/professional certifications, qualifications/experience, performance in the role and potential for revenue generation (Producer roles only). Compensation The base salary compensation range being offered for this role is $100,000.00-$130,000.00 USD annually. This role is also eligible for an annual short-term incentive bonus. Company Benefits WTW provides a competitive benefit package which includes the following (eligibility requirements apply): Health and Welfare Benefits: Medical (including prescription coverage), Dental, Vision, Health Savings Account, Commuter Account, Health Care and Dependent Care Flexible Spending Accounts, Group Accident, Group Critical Illness, Life Insurance, AD&D, Group Legal, Identify Theft Protection, Wellbeing Program and Work/Life Resources (including Employee Assistance Program) Leave Benefits: Paid Holidays, Annual Paid Time Off (includes state/local paid leave where required), Short-Term Disability, Long-Term Disability, Other Leaves (e.g., Bereavement, FMLA, ADA, Jury Duty, Military Leave, and Parental and Adoption Leave), Paid Time Off (only included for Washington roles) Retirement Benefits: Qualified contributory pension plan (if eligible) and 401(k) plan with annual nonelective company contribution. Non-qualified retirement plans available to senior level colleagues who satisfy the plans' eligibility requirements. Pursuant to the San Francisco Fair Chance Ordinance and Los Angeles County Fair Chance Ordinance for Employers, we will consider for employment qualified applicants with arrest and conviction records. EOE, including disability/vets

The Production Mechanic III is a skilled trade, overtime eligible position that requires a technical background. The Production Mechanic III will report to the VP of Engineering s Management team. The Production Mechanic III is responsible for ensuring the operation of machinery and mechanical equipment at all Charm Sciences facilities as needed. The pay range for this position is $31.50 to $47.00 per hour. Compensation will be determined based on education, experience, and other factors in accordance with applicable laws. Essential Functions Perform and manage preventative maintenance program to ensure all packaging equipment remains in as new condition, includes motors, pneumatic systems, and conveyor systems. Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. Troubleshoots and repairs manufacturing and packaging line equipment and parts by using hoists, cranes, and hand and power tools; examining form and texture of parts. Determines changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments. Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. Conserves maintenance resources by using equipment and supplies as needed to accomplish tasks. Continuously evaluates and guides maintenance team and practices to eliminate non-productive activities and implements productivity enhancements. Maintains a working cell phone in order to ensure consistent communication during regular working hours, unless a device is provided by the company. Nothing in this job description restricts management s right to assign or reassign duties and responsibilities to this job at any time. Knowledge, Skills & Abilities Required: 5+ years experience in an industrial/manufacturing maintenance/operation environment. 5+ years experience in industrial electrical systems, and pneumatic controls. Comprehensive knowledge PLC s and ability to work with proprietary computer base machine controls. Hands on attitude and solid work history. Available to work extra hours when needed to reach production goals. Must possess a valid driver s license. Preferred: Skilled with Microsoft Office. GMP/GLP Experience. Knowledge of OSHA Safety Rules. Supervisory Experience. Possesses basic machine shop skills. Completion of technical school or courses. Physical Requirements: Able to lift and or move up to 50 pounds frequently. Must be able to bend, push and pull equipment. Able to remain stationary for an extended length of time. The person in this position must be able to visually detect malfunctions in production equipment. The person in this position is frequently required to move about the facility and drive to other locations. Must be able to work in clean room environment. Must be able to position self for an extended period of time in front of or under equipment and have dexterity to work with trade tools. The person in this position must be able to communicate findings when troubleshooting.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. ABOUT THE ROLE You will be a member of our multi-disciplinary team and will work under the direction of a licensed engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. HERE'S WHAT YOU WILL DO Perform designs of ductwork, piping, equipment selection for HVAC systems for building design, independently for smaller/less technical projects; under the supervision of a professional engineer for complex projects. As necessary assist with Plumbing and Fire Protection Designs. Calculate heating and cooling loads, layout and design ductwork and piping using energy modeling software. Prepare Revit/BIM modeling of construction drawings of HVAC systems from schematic design to construction administration phases including layout, sketches and detail drawings as required. As necessary perform Revit/BIM modeling for plumbing and fire protection systems. Edit specifications relating to existing or new projects. Specify mechanical equipment such as boilers, chillers, and air handling units. Review shop drawings for compliance of specifications and contract documents. Interface effectively with clients and members of the project team by attending Owner, Architect, Construction Administration (OAC) meetings in conjunction with project budget. May independently research as need arises and respond to emergent issues. Assists in gathering information to respond to RFI's and review of change orders in the preparation of construction documents. Perform job site visits to verify existing conditions and observe construction progress. Site visits frequently require a physical walk-through of site. May direct activities of staff with less experience. Perform other duties as assigned. HERE'S WHAT YOU WILL NEED Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred. Minimum of 4 years of related experience required. EIT/FE in the United States preferred. LEED accreditation preferred. Excellent verbal and written communication skills. Able to effectively handle multiple projects. Experience in computer applications for engineering design programs (i.e. Revit, Trane Trace or Trane 3D Plus) required. The salary range for this position to be filled in the Boston office is $77,439 to $91,105 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at ********************************************** Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. ABOUT OUR FIRM CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don't just dream up solutions - we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It's more than a philosophy - it's who we are, and it drives us to make a meaningful, lasting difference every day. ABOUT WORKING HERE We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about. We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives. We're about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we're ready for you. Please note that candidates can only apply to our positions on our company Careers site. It's not uncommon for scammers to create positions that look legitimate on other sites; never enter your information or apply for CannonDesign positions on any platform. Should an issue arise that you feel we should be aware of, please contact us. Please provide your resume and portfolio when applying. As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct. CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm's policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign's policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints.

Job DescriptionDescription: This is a Career Opportunity role with growth potential! FSM Group, LLC, an aviation fuel management company with multiple locations in the US, has an immediate need for a Fuel Farm Mechanic for aircraft fueling at its Boston Logan International Airport operation. FSM Group where safety is paramount, strives to pay competitive wages, offer meaningful and affordable health insurance, growth opportunities for performers, and a work environment of respect. The Fuel Farm Mechanic is responsible for servicing airport fueling carts, vehicles, tanker trucks, transport vehicles and related equipment in a safe, professional, and timely manner. Essential Responsibilities: Line maintenance Perform preventative maintenance Minor/major repair of a varied assortment of equipment Troubleshooting Inspect the hydrant system Other duties as assigned. Benefits: Strong culture of promoting from within Pay on Demand Program A full set of company-provided uniforms Medical, Dental, Vision, and Life Insurance 401(k) matching program with immediate vesting Paid Time Off Premium pay for working holiday shifts …and much more! Learn more at fsmgroup.us Requirements: 1-2 years of mechanical experience of any kind (preferably auto mechanic, box truck, HVAC, refrigeration systems, etc.) Mechanical minds who enjoy problem-solving General knowledge of carburetors, alternators, starter motors, batteries, hydraulics, small engines, radiators, and diesel engines At least 18 years of age Pass a federal fingerprint background check Ability to document prior work history Have proof of US work eligibility

700 Morrissey Boulevard, Boston, MA 02122 BDC / Inside Sales Representative / Business Development$17 per Hour | $30+ Opportunity with Weekly-Paid Commissions Leads ProvidedProven Experience in Inside Sales or a Related Field Is Preferred but Not Required In-Person, Full-Time Position Walk-in Applicants are Welcome! Career Advancement is Encouraged Here! Tasca Toyota of Boston operates a busy, high volume Toyota dealership in a major metro marketplace. We compete to be one of the top Toyota dealerships in all of New England. Are you currently working in Customer Service or Inside Sales? Do you have experience working with people over the telephone, email and text? Then join us at Tasca Automotive Group and be part of a team that drives success! If you are driven by results and eager to make an impact in the automotive industry, we invite you to apply today and join the Tasca Automotive Group family! If you are passionate about automotive sales and eager to grow your career with a reputable company, we invite you to explore this opportunity. Summary: We are seeking an Inside Sales Representative to join our dynamic team. In this role, you will be responsible for driving sales through effective communication and relationship-building with potential customers. Your contributions will be vital in enhancing our customer experience and achieving our sales targets. Benefits: $17 hour | $30+ opportunity with weekly paid commissions. Leads provided 401(k) matching Health and Dental insurance with 50% company participation. Paid vacations and sick days Employee discount Excellent working conditions with an opportunity to be an integral part of a growing organization Responsibilities Inside Sales Representative: Engage with potential customers through outbound call, email and text. Identify customer needs and provide solutions. Maintain accurate records of customer interactions and sales activities. Collaborate with the sales team to develop new business. Provide exceptional customer service to ensure 100% satisfaction. Stay informed, educated and knowledgeable on the product. Requirements: Proven experience in inside sales or a related field is preferred but not required. Strong communication skills with the ability to build rapport with customers. Language diversity is a plus: Spanish, Vietnamese, Chinese Mandarin. Ability to work independently and complete daily outreach. A passion for the automotive industry is highly desirable. Dependable, looking for a good solid job and willing to show up as scheduled. Please upload your resume.Completing the online assessment will grant you priority consideration! Must be authorized to work in the U.S. without sponsorship and be a current resident. Must pass pre-employment testing to include background checks, MVR, and drug screening. We are an Equal Opportunity Employer . All qualified applicants are considered regardless of ethnicity, nationality, gender, veteran or disability status, religion, age, gender orientation or other protected status. RequiredPreferredJob Industries Customer Service

Job Description We are hiring immediately for a full time MECHANIC I position. Note: online applications accepted only. Schedule: Full time; Days and hours may vary. More details upon interview. Requirement: Prior facility maintenance technician experience is preferred. Pay Range: $35.00 per hour to $40.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1485470. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: *************************** Skg Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM's clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, including HVAC systems, high-pressure boilers, generators and steam equipment. Reads and records information from meters and gauges at specified intervals to verify operating conditions. Essential Duties and Responsibilities: Provides quality customer service by providing one-on-one attention to detail. Responds to dispatch calls for machine repairs using company vehicle. Calls on existing customers to determine adequacy of service; listens to and resolves service complaints. Visually inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area. Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair. Reviews inventory and orders parts; ships and receives machines and equipment; maintains equipment inventory. Sets up and operates mechanical equipment and small hand tools (e.g., drills, grinders welding torches) for machine and equipment repair. Maintains clean and safe work environment; performs job safely. Consistently demonstrates support of the department by striving for excellence. Contributes to the team; exhibits professionalism with customers, fellow employees and others. Performs other duties as assigned. Qualifications: Type I Refrigeration Certification & Valid Non-CDL Class C driver's license. Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. ************************************************************************************* About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

TransAction Corporate Shuttles Embark on a rewarding career journey with us - a company proudly recognized as one of the Great Places to Work in 2023-2024! A Mechanic is responsible for investigating problems with different types of motor vehicles and making repairs accordingly. Their duties include communicating with vehicle operators to discuss their concerns, carrying out routine maintenance procedures on motor vehicles and replacing parts on motor vehicles to promote their functionality. Pay is $25-$35/hour Benefits Medical Dental Vision Accident Plan Critical Illness Voluntary Short-Term Disability Plan Voluntary Life/AD&D Plan 401K w/ Employer Match Responsibility Profile: Assess vehicles and/or machinery to accurately diagnose and repair issues. Liaise with clients and drivers to determine their automotive requirements and communicate vehicular defects or problems. Provide routine inspections of vehicles and inform clients of any issues. Prepare quotes and work estimates as requested. Keep an accurate log of all work performed. Maintain and clean garage equipment and tools to ensure they are always kept in a safe and usable condition. Adhere to company work safety policies. Perform other duties as assigned. Qualifications 3-4 years of mechanic experience. High school diploma. Beacon Mobility is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Beacon Mobility makes hiring decisions based solely on qualifications, merit, and business needs at the time .

TransAction Corporate Shuttles Embark on a rewarding career journey with us - a company proudly recognized as one of the Great Places to Work in 2023-2024! A Mechanic is responsible for investigating problems with different types of motor vehicles and making repairs accordingly. Their duties include communicating with vehicle operators to discuss their concerns, carrying out routine maintenance procedures on motor vehicles and replacing parts on motor vehicles to promote their functionality. Pay is $25-$35/hour Benefits Medical Dental Vision Accident Plan Critical Illness Voluntary Short-Term Disability Plan Voluntary Life/AD&D Plan 401K w/ Employer Match Responsibility Profile: Assess vehicles and/or machinery to accurately diagnose and repair issues. Liaise with clients and drivers to determine their automotive requirements and communicate vehicular defects or problems. Provide routine inspections of vehicles and inform clients of any issues. Prepare quotes and work estimates as requested. Keep an accurate log of all work performed. Maintain and clean garage equipment and tools to ensure they are always kept in a safe and usable condition. Adhere to company work safety policies. Perform other duties as assigned. Qualifications 3-4 years of mechanic experience. High school diploma. Beacon Mobility is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Beacon Mobility makes hiring decisions based solely on qualifications, merit, and business needs at the time .

Full-time, Direct, Permanent position A&P Mechanics work independently or as a team member performing inspections, repairs and preventative maintenance on company aircraft. PRIMARY RESPONSIBILITIES: • Familiar with the policies and procedures contained in company manuals, submits changes as appropriate to eliminate conflicts and/or enhance operational effectiveness • Comply with 14 CFR (as applicable), manufacturer's specifications, company policies and procedures, as well as other methods accepted by the FAA, when accomplishing maintenance • Assist with completion of shift turnover reports in accordance with company procedures • Participate in shift meetings and briefings as required • Update aircraft fleet status information for Company aircraft as directed • Conduct on-the-job training as assigned by the Base-Manager/Supervisor • Properly executes maintenance work records • Maintain the maintenance work area in a clean and orderly condition • Adhere to material handling and control procedures specified in company manuals and by the equipment manufacturers • Responsible to open and/or close facility • Perform aircraft run-ups and taxis • Perform road trips to repair aircraft at stations other than the maintenance base • Clean aircraft after completing maintenance • Additional duties as assigned QUALIFICATIONS: • Current A&P certificate required • Must meet the recent experience requirements as stated in 14 CFR 65.83 • Minimum two years professional aircraft maintenance work experience preferred • Must have basic mechanical skills • Must own basic set of aircraft maintenance tools • Must take instruction and guidance well • Must be goal oriented, have an exceptional attention to detail, and must work well in team situations and also as an individual • Must be able to lift 40 lbs. • Must be able to perform moderately strenuous physical tasks which include bending, stooping, kneeling and working overhead for long periods of time • Must hold a valid driver's license • Must have a high school diploma or equivalent • Must have a flexible schedule and be able to work any shift including nights, weekends and holidays