Mechanic jobs in Columbia, MD - 2,462 jobs

Academy Bus is seeking an experienced Class A Diesel Bus Mechanic for our Capitol Heights, MD location. Must have experience working on Van Hool, Temsa, and Prevost Buses. Familiar with Cummins and Detroit engines. Must have experience troubleshooting issues with Electrical & Engine diagnostics on Buses with a laptop, i.e. Detroit, Allison, Cummins. Must have own tools. Earn $34.00-$42.00 per hour, based on candidate experience level. Responsibilities: Diesel Mechanic - Class A / Level 1 Repair, troubleshooting and diagnosis of modern tour bus engines and transmissions Reconditioning, preventative and routine maintenance Inspections and road tests Warranty and repair documentation Diagnosis, inspection, installation, disassembly and cleaning of components such as: Diesel engines, electronic systems/motors/controls, drive line components, tires, bearings, brake systems, seals, radiators, water pumps, coolant hoses, alternators, regulators, steering components, oil/air filters, door assemblies, controls, belts, pneumatic valves, cables, and linkages, radiators, heating, air conditioning, alternators, generators, voltage regulators, suspensions, seating, steering, and glass. Respond to road calls General welding/fabrication Train and supervise B/C Level Mechanics and maintenance staff Requirements: Must have experience working on Van Hool, Temsa, and Prevost buses Must be familiar Cummins and Detroit engines Must have AC Certification Proven ability to use hands tools, power tools, hydraulic jacks, pullers, VOA instruments, reamers, vacuum and compression pumps, welding equipment, and testing instruments Proficient in the use of diagnostic devices such as: DDEC readers, ATEC readers, SmarTire, schematics, AIC (Freon) recovery and charging equipment Valid driver's license Basic computer skills Ability to pass pre-employment background check and drug screen CDL License with Passenger and Airbrake endorsement is a plus but not required, willingness to obtain a CDL License through our in-house training department is also desirable Health Insurance and Benefits Offered Include: Medical, Dental, Vision, Prescription, and Life insurance Supplemental coverages 401K plan Paid time off Paid holidays Academy is EEO Diesel Mechanic, Bus Mechanic, Motorcoach Mechanic, Motorcoach Bus Mechanic, Diesel Technician, Bus Technician, Motorcoach Technician, Motorcoach Bus Technician, Diesel Bus Technician, Diesel Motorcoach Technician, Diesel Motorcoach Bus Technician, Diesel Mechanic, Diesel Bus Mechanic, Diesel Motorcoach Mechanic, Diesel Motorcoach Bus Technician, Class A Mechanic, Class A Diesel Technician, Class B Mechanic, Class B Diesel Technician, Class C Mechanic, Class C Diesel Technician. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

SNI has an immediate need for an On-Road Field Diesel Mechanic to join a well-established and successful residential and commercial site developer! The successful On-Road Field Diesel Mechanic will have experience maintaining, repairing, and troubleshooting heavy diesel-powered equipment at various job sites throughout the Baltimore, Maryland area. You will be provided with a company truck and will be tasked with working on heavy equipment and diesel engine mechanics, excellent troubleshooting skills, and the ability to work independently in a field environment. RESPONSIBILITES: Perform on-site maintenance and repairs of heavy diesel-powered equipment, including excavators, bulldozers, loaders, and other construction machinery. Travel to various job sites to diagnose and resolve mechanical and diesel engine issues. Conduct routine maintenance services, including oil changes, filter replacements, and inspections of diesel engines and associated systems. Troubleshoot and repair hydraulic, electrical, and diesel engine systems. Maintain accurate records of maintenance and repair activities. Drive and maintain the company-provided service truck. Perform maintenance and repairs to light trucks as needed. Ensure all work is performed safely and efficiently. QUALIFICATIONS: Minimum of 3-5 years of experience in heavy equipment and diesel engine maintenance and repair. Strong mechanical and technical skills, with a focus on diesel engines. Excellent troubleshooting and diagnostic abilities, especially with diesel systems. Familiarity with hydraulic and electrical systems. Light truck maintenance and repair experience is preferred. Ability to work independently and manage time effectively. Valid driver's license and a clean driving record. Post-secondary degree or certification in heavy equipment/diesel mechanics is preferred but not required. Experience with diagnostic tools. Familiarity with parts and electronic components of complex machinery and engines. Benefits Health Insurance Dental and Vision Insurance Life Insurance Paid Holidays Paid Vacation Year End Bonus 401K/Profit Sharing Short Term Disability Safety Training

The A&P Mechanic - G650 is responsible for performing high-level maintenance, inspections, troubleshooting, and repairs on the G650 aircraft. This position supports a VIP/ VVIP aviation environment that requires exceptional technical expertise, meticulous attention to detail, and the highest standards of safety, confidentiality, and professionalism. The ideal candidate has advanced experience with the G650 platform, knowledge of G650-specific systems and modifications, and the ability to maintain both airframe and cabin systems to meet elevated customer expectations. Key Responsibilities Aircraft Maintenance & Repair Perform scheduled and unscheduled maintenance on the G650, including A/B checks, cabin systems maintenance, and Gulfstream-specific modifications. Conduct inspections and repairs on high-end interiors, cabin management systems (CMS), entertainment systems, lighting, galley equipment, and VIP-customized installations. Execute component replacements, SB/AD compliance, structural repairs, and configuration-controlled cabin changes per BBJ documentation. Support AOG recovery and rapid-response troubleshooting in remote or international locations as needed. Regulatory Compliance & Documentation Ensure all maintenance actions comply with FAA regulations, company procedures, and Gulfstream-specific maintenance programs. Accurately document work performed in digital maintenance tracking systems and aircraft logbooks. Review and apply service bulletins. Coordinate with Quality Assurance for inspections, major repairs, and return-to-service authorization. Inspection, Diagnostics & Troubleshooting Perform detailed inspections of airframe, powerplant, avionics, and high-touch cabin systems unique to G650 configuration. Utilize advanced diagnostic equipment and built-in test systems (BITE) to identify and resolve discrepancies. Conduct borescope inspections on LEAP-1B engines, APU troubleshooting, and avionics system evaluations. VIP Cabin, Interior & Special Systems Support Maintain and repair VIP furnishings, luxury materials, cabinetry, and premium finishes. Troubleshoot and support Cabin Management Systems (CMS), satellite communications, Wi-Fi, Blu-ray/AV systems, and aircraft internet hardware. Work closely with flight crews and cabin staff to ensure the aircraft meets VVIP standards of comfort and functionality. Safety, Quality & Operational Excellence Uphold the highest levels of safety, confidentiality, and customer service expected in VIP aviation environments. Support continuous improvement of maintenance processes, reliability programs, and long-term fleet health monitoring. Maintain a clean, organized workspace and strictly follow OSHA, company, and regulatory safety protocols. Coordinate with operations, flight crew, engineering, and supply chain for aircraft readiness and mission reliability. Required Qualifications Valid FAA Airframe & Powerplant (A&P) Certificate. 3-5+ years of experience maintaining G650 platforms. Strong experience with: G650 interior and cabin systems Digital maintenance platforms (AMOS, TRAX, CMP, or equivalent) VIP cabin repairs, CMS systems, and premium interiors Ability to read and interpret data, manuals, engineering drawings, and wiring diagrams. Capable of working in high-standards VIP or corporate aviation environments. Must possess an active Secret (or TS/SCI) security clearance or be eligible to obtain one. Preferred Qualifications G650 Maintenance Training Certification. Prior experience with VVIP fleet operators, corporate aviation, charter, or government executive transport. FCC License, NCATT or avionics endorsements, or AET certifications. AOG experience with international travel capability. Strong understanding of cybersecurity and data sensitivity for VIP aircraft systems. This position does not offer relocation assistance; local candidates are preferred. Core Competencies Extreme attention to detail and craftsmanship High professionalism and discretion Strong troubleshooting and diagnostic capability Excellent communication and teamwork Ability to adapt in high-tempo VIP operations Customer-service mindset for VVIP standards

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) - Preferred Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.82 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Flexible schedule Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Location: Washington, DC Metro Area (DC | MD | VA) (Relocation Assistance up to $10,000 Available) Job Type: Full-Time Pay Rate: $40$50 per hour (based on experience) Benefits: Flexible Scheduling Options, Health & Life Insurance (Medical, Dental, Vision), PTO, Paid & Floating Holidays, 401(k) with Matching, Tuition Reimbursement, Short- & Long-Term Disability, License Fee Coverage, Travel Pay About Us Were an elevator company serving the DC metro area and the greater areas. Our reputation is built on responsive service, high-quality workmanship, and a commitment to safety. Were looking for a skilled and motivated Elevator Mechanic to join our team and take the lead on projects ranging from routine maintenance to full installations. Your Role As an Elevator Mechanic, you'll be responsible for servicing, repairing, installing, and modernizing elevator systems in commercial buildings. Youll work independently or as part of a small team to ensure safe, reliable, and code-compliant operation of all systems. Key Responsibilities Troubleshoot and repair electrical, mechanical, and hydraulic elevator systems. Perform preventive maintenance and safety inspections. Install and modernize elevator systems according to design specs and code. Respond to service calls and after-hours emergencies as needed. Maintain accurate records of work performed and parts used. Communicate clearly with clients, team members, and supervisors. Qualifications Must have Certified Elevator Technician credential or equivalent. Must know how to read blueprints, schematics, and technical manuals. Must have OSHA 10/30 certification. Must be comfortable working at heights and in confined spaces. Strong troubleshooting and problem-solving skills. Knowledge of local, state, and national elevator safety codes. Valid drivers license and reliable transportation. Compensation & Perks Hourly Rate: $40$50/hour depending on experience and skill level Company vehicle or vehicle allowance (based on role) Overtime opportunities available Growth potential in a stable, high-demand trade Housing near the worksite (if needed) Flexible work week scheduling, health benefits, PTO, and retirement plan options How to Apply If you're a skilled elevator mechanic looking for a great team, steady work, and room to grow, wed love to talk to you! Job Type: Full-time Pay: $40.00 - $50.00 per hour Expected hours: 40 per week Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible schedule Health insurance Life insurance Paid time off Professional development assistance Tuition reimbursement Vision insurance Work Location: In person

Ensure all tasks assigned are completed in accordance with manufacturer's manuals and FAA accepted or approved data Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company's, FAA Approved Continuous Airworthiness Maintenance Program Interpret aircraft technical manuals, and electrical drawings Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor Maintain work area in a neat, clean and safe condition at all times Perform only those tasks for which proper training and qualification has been obtained Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed Perform other duties as assigned

Forklift Mechanic - Linthicum Heights, MD | Full-Time | Monday-Friday $40-$45 Hourly We are a powerhouse, family-owned leader in material handling service - and we're expanding. Right now, we're searching for one top-tier Forklift Mechanic who's ready to step into the best opportunity of their career. What We Offer health, dental, and vision plans + company-paid life insurance 401(k) with aggressive company match Generous PTO, paid holidays, and paid training Clean, modern facility with the latest diagnostic tools and lifts Your Day-to-Day Diagnose and conquer complex repairs on electric, LPG, and diesel forklifts Master hydraulics, electrics, transmissions, and drive systems Perform OSHA-compliant PMs and inspections Mentor younger techs and run your own service calls when you're ready What You Bring Proven, hands-on forklift or heavy equipment experience Certifications in forklift or heavy equipment repair Strong understanding of hydraulics, engines, transmissions, and electrical systems and schematic-reading skills Clean driving record and professional demeanor Your own professional tools If you're the tech everyone else calls when they're stuck, we want you. Compensation: $40.00 - $45.00 per hour

Job Description Forklift Mechanic - Linthicum Heights, MD | Full-Time | Monday-Friday $40-$45 Hourly We are a powerhouse, family-owned leader in material handling service - and we're expanding. Right now, we're searching for one top-tier Forklift Mechanic who's ready to step into the best opportunity of their career. What We Offer health, dental, and vision plans + company-paid life insurance 401(k) with aggressive company match Generous PTO, paid holidays, and paid training Clean, modern facility with the latest diagnostic tools and lifts Your Day-to-Day Diagnose and conquer complex repairs on electric, LPG, and diesel forklifts Master hydraulics, electrics, transmissions, and drive systems Perform OSHA-compliant PMs and inspections Mentor younger techs and run your own service calls when you're ready What You Bring Proven, hands-on forklift or heavy equipment experience Certifications in forklift or heavy equipment repair Strong understanding of hydraulics, engines, transmissions, and electrical systems and schematic-reading skills Clean driving record and professional demeanor Your own professional tools If you're the tech everyone else calls when they're stuck, we want you.

Diesel Mechanic Full Time Hanover, MD Earning Potential up to $65k, based on experience Looking for a new and exciting career? Join the Coach USA/Megabus operations team in Hanover! Dillon's Bus Lines, LLC, Maryland's premier motor coach company, has new and exciting career opportunities for Full Time Diesel Mechanics for its Hanover, MD location under the direct supervision of the Maintenance Manager. Why join with Us? Weekly Competitive Experience Based Pay Rewards & Benefits: Enjoy paid holidays, vacation, PTO, a comprehensive benefits package (including medical, dental, vision, short term disability, life insurance, 401K), Employee Assistance Program “EAP”, Free membership for “Tickets at Work” for exclusive employee deals Wear It Proud: Uniforms provided to get you in the professional spirit. Growth & Development Opportunities: Your career journey is important. We support your growth with training, opportunities to advance and obtaining a CDL. Required Experience: Class A: Master Mechanic with 5 years' experience on trucks, buses, or heavy equipment Class B: Mid-Level with 3 years' experience on trucks, buses, or heavy equipment Diagnose and Repair: Utilize diagnostic tools to identify issues with mechanical, electrical, and other breakdowns and failures, performing necessary repairs. Diesel Engines: Removal, installation, disassembly, and reconditioning of components of diesel engines. Preventative Maintenance: Conduct routine and preventative maintenance according to manufacturers' specifications to ensure vehicle reliability and longevity. What Sets You Apart: Experienced Professionals: You have a solid background in diesel mechanics, with specific experience working on Cummins and Detroit engines. ASE Diesel Certification or associate degree in diesel technology is highly regarded but not mandatory. Problem Solvers: You are adept at troubleshooting and enjoy the challenge of finding and implementing solutions to mechanical issues. Computer diagnostic skills a plus, but training is provided. Team Players: Ability to work in all weather conditions, including outdoors. Willingness to work weekends and holidays, as needed. 2nd or 3rd Shifts Available Based Upon Operational Needs. Experience Counts: Have the necessary toolkit to carry out maintenance duties independently. Experience in the Motor Coach Industry preferred. Safety Champion: Adhere to and champion safety standards to ensure a secure workplace for everyone. To learn more about your next big career change! APPLY NOW! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. ©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"©

This position is HYBRID with 50% to 75% travel. This hybrid role requires the employee to reside within 50 miles of one of the following locations: Washington, DC; Albany, NY; or West Virginia. Who We Are: Headquartered in Washington, DC, Versar Global Solutions provides full mission lifecycle solutions for challenges faced by our government and commercial Customers in the natural, built, and digital environments. With nearly 2,000 team members around the world, and a rich legacy spanning more than 70 years, Versar Global Solutions delivers a broad array of planning, analysis and risk management solutions, project and program management, operations and maintenance services, and information technology applications for environmental management and remediation projects, mission critical facilities and installations, and in support of readiness and contingency operations. Who You Are: Versar is seeking Liquid Fuels Mechanics with knowledge and experience to support Versar Global Solutions' team performance on assigned United States Army Corps of Engineers (USACE) Recurring Maintenance and Minor Repair (RMMR) task orders. This position performs site maintenance tasks related to fuel systems, such as identifying and troubleshooting fuel systems discrepancies, minor construction activities, preventative and corrective maintenance, and repair projects. The individual will serve under the direction of the RMMR Site Manager with duties that include performing all phases of work; working with several subcontractors or support staff; ensure compliance with all applicable construction codes, standards, and local regulations; ensuring on-site quality control and on-site safety requirements are met; responsible for all onsite and contractor-controlled documentation. *This position is contingent upon award. What You'll Do: Perform routine maintenance inspections at various U.S. military locations in the continental United States, through anticipation and planning of recurring maintenance activities. Troubleshoot, repair, and maintain Class I, II and III hydrant systems including other supporting equipment and appurtenances. Maintain fuel storage tanks, including inspection reports of the operations for unusual circumstances to include pressure changes, leaks, corrosion, etc. Support development of scopes of work for repair and modification Service Orders for Department of Defense (DoD) Fuel facilities as part of the USACE RMMR program. Repairs will be developed in accordance with UFC 3-460-01 “Design: Petroleum Facilities,” American Petroleum Institute (API) Standard 650 “Advanced Tank & Construction,” and applicable Unified Facilities Guide Specifications (UFGS). Diagnose and correct problems using test equipment, statistical, equipment history, manufactures specifications, and industry-related standards to avoid fuel spills or fuel facility related events. Review repair specifications of equipment or components being purchased or fabricated for repair and construction projects, to ensure compliance with contractual requirements and material specifications. Procure material required by repair or maintenance work. Maintain records relating to maintenance. Document and report all activities in a centrally managed maintenance management system. Maintain good working relationship with coworkers and military management personnel utilizing good judgment in recognizing scope of authority. Investigate and adjust customer complaints and concerns regarding fuel systems maintenance. Maintain knowledge of military standards, Unified Facilities Criteria (UFCs), EM-385-1-1 Safety and Health Requirements Manual, OSHA, EPA, and other industry standards. Adhere to strictly enforced Health and Safety requirements with the highest quality standards expected. Perform all other duties as prescribed by management. What You'll Bring: Two to five years of experience in liquid fuels maintenance or construction on various types of fuel systems that can include marine loading arms, bulk fuel facilities, hot pit fueling systems, gas station dispensing systems, cathodic protection systems, and leak detection systems. Willing to waive some experience and train the right candidate. High School Diploma/GED Proficient in MS Office suite of tools, including Word and Excel; be capable of uploading daily/weekly field reports with photos to cloud-based information management systems. Ability to use/learn QuickBase, eMaint, MaintainX, Timberland and/or other software programs that manage information and schedules. OSHA 30 and/or HAZWOPER training preferred. CPR/First Aid certified preferred Experience with equipment operation and power tools. Possess working mechanical and electrical equipment knowledge. Must possess and maintain an active and valid driver's license without restrictions. Must be proficient in English, both written and verbal, to ensure effective communication and collaboration. Successful results of pre-employment screenings, including federal background check, MVR, and drug screen. Comply with company drug and alcohol policy. Be authorized to work in the US or will be authorized by the successful candidate's start date. Abilities: Ability to communicate verbally with internal and external clients. Able to exercise good judgment and conflict resolution strategies with client issues. Can work independently and is self-motivated; works well towards timelines and goals. Has the ability to apply minor mathematical concepts, including fractions, percentages, as they apply to practical situations; can conduct problem-solving. Able to react to changing situations and retain effectiveness. Physical Demands: This position requires the individual to ascend and descend ladders, scaffolds, stairs and sometimes work in confined spaces in proximity to loud equipment. Must be able to lift and carry (or otherwise move) up to 50 pounds regularly. Must be able to respond quickly to sounds and dangerous situations, if needed. Must be able to wear personal protective gear most of the day. Must be able to sit, stand, and walk, must have close and color vision, use depth and peripheral vision, and be able to adjust focus. Work Environment: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent field work at construction and client sites will require employee to be exposed to a variety of outdoor weather conditions in fueling facility environments. Employees will wear hard hats, eye protection, hand protection, foot protection and other appropriate safety equipment as needed in the field. Travel Requirements: Frequent attendance at on-site events at designated locations requires the ability to provide reliable transportation and maintain a current, valid driver's license and proof of insurance. Position will require travel at a frequency of 50% to domestic locations. Access to federal installations or other secure facilities will require security badges and employee must be able to obtain basic security clearances. Code of Ethics: All employees are expected to conduct business in an ethical manner and refrain from dishonest or unethical conduct. Employees shall act in a manner which represents their integrity, impartiality and the best interests of the company and its customers. Compensation The salary range for this position varies by geographic location and reflects the minimum and maximum compensation the Company in good faith expects to pay for this role based on market data, internal equity, and the candidate's education, experience, knowledge, skills, and abilities. Washington, DC $52,232 - $58,761 Albany, NY $50,762 - $57,107 Martinsburg, WV $49,158 - $55,303 EEO Commitment Versar Global Solutions is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. Versar Global Solutions complies with applicable state and local laws governing non-discrimination in employment in every location in which the company operates. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Versar Global Solutions expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, marital status, amnesty, or status as a covered veteran. Improper interference with the ability of Versar Global Solutions employees to perform their job duties is not tolerated. #LI-WJ1

EMCOR Services CES has an immediate need for a HVAC Journeyman Mechanic in Washington, DC. The HVAC Mechanic trouble shoots, repairs, installs, and performs preventative maintenance on all the HVAC systems within the Central Utilities Plant (CUP), and other buildings related to the contract by performing the following duties. This is a journeyman position and requires mechanical, electrical, and plumbing aptitudes. This is a part time position. The hours are 9:00 AM to 9:00PM Saturday and Sunday and Holidays. This position is covered by the CBA for Local 99. #EGS #LI-NS1 Essential Duties and Responsibilities: Monitors safe and efficient operations of HVAC/refrigeration systems in accordance with departmental requirements; corrects deficiencies according to PM/CM and manufacturers specifications. Conducts preventive and corrective maintenance on all HVAC and refrigeration systems, as well as fan coil or dx units, and other equipment as assigned. Installs and services new HVAC/refrigeration equipment. Perform all aspects of repairs to Air Handling Units (AHU) to include filter replacement, bearing replacement, motor replacement, belt replacement and proper alignment in accordance to OEM procedures. Coordinates inspections, repairs and installation in consultation with staff in affected areas to minimize disruption of operations. Complete Work Order and Preventative Maintenance (PM) paperwork in a timely and professional manner. Participates in the computerized maintenance management system for work and equipment documentation Participate in the building management system. Monitor design parameters for status and efficiency. Assist in programming recommendations for the system. Track refrigerant loss, procurement, and storage per government standards. Install, maintain and repair all field devices for the Temperature Tracking System. Participate in the testing of HVAC shutdown by duct smoke detectors. Performs heating, ventilation, and air conditioning (HVAC) maintenance on air conditioning units, fans, air handlers, water heaters, converters, duct work and system controls. Request assistance from plumbers, painters, electricians, carpenters, and Building Engineers when necessary. Coordinates inspections, repairs, and installation with staff and tenants in affected areas to minimize disruption of CNRIC operations. Ensures compliance with department safety and quality standards to optimize effective utilization of resources and productivity. Follow and implement standard Lock Out Tag Out procedures. Complete Corrective Maintenance and Preventive Maintenance (PM) work orders in a timely and professional manner. Attends weekly Tool Box safety meetings Obtain OSHA 10 General Industry Safety and Health certification. (EMCOR provided training) Qualifications: At least there (3) years of applicable experience. Must have a current Journeyman HVAC License Must have a current Universal CFC License. Must possess a valid Driver's License. Experience with Microsoft Office Must complete an OSHA 10 General Safety and Health training class (supplied by EMCOR). Must be able to read and understand architectural and mechanical drawings. Must be able to read and understand manufacture's submittals and literature. Review and provide recommendations to preventive maintenance inspections and procedures. Must be able to specify and order material and replacement parts for equipment as necessary. Must be able to understand and implement infectious control policies and procedures. Must be able to work a schedule of 9:00 AM to 9:00 PM Saturday and Sunday and Holidays. This position will require the successful candidate to show proof of a complete COVID-19 vaccination. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee is frequently required to stand. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee maybe exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; cold and heat; risk of electrical shock and vibration. The employee is occasionally exposed to the risk of radiation. The noise level in the work environment is usually moderate. Compensation: $43.39 per hour Other Compensation: NA Benefits: Health and Welfare Benefits consistent with the Collective Bargaining Agreement Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Type: Full Time, Non-Exempt Work Schedule: Full-time, Day Shift Compensation: $36.67-$36.67/hr. + $10,000.00 relocation bonus Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of a ASE Master Mechanic at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance Health and Welfare Benefit ($5.85 per hour worked) Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 12 paid days of vacation at the start of employment, paid sick leave Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, as well as our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality and our dedication to providing a safe and respectful work environment to our employees. Tessera is seeking a problem solving and reliable Master Mechanic with a positive attitude. Typical duties include but are not limited to: Diagnosing the source of trouble and determining the extent of repairs required; coordinating the procurement of materials/parts, replacing worn or broken parts such as, but not limited to, engine components, bearing, piston rings, adjusting valves or other engine parts. Rebuilding carburetors, overhauling transmissions; and repairing fuel injection, lighting, and ignition systems; brake systems; steering/suspension systems; exhaust and hydraulic systems; A/C systems. Performing service, inspections, maintenance, repair, and overhaul of equipment to include, but not limited to, wheeled vehicles, track vehicles, engineer equipment, power generation, and material handling equipment, propane, natural gas, electric, gasoline, and diesel engine-powered vehicles, including light, medium, heavy, and heavy equipment trailers. Understand and follow technical manuals, lube orders, wiring and hydraulic schematics to ensure proper diagnosis and repair during non-annual and annual services. Perform major repair jobs by disassembling and cleaning parts, removal, repair and installation of assemblies, and components. Mentor employees and new hires on proper procedures pertaining to shop safety, maintenance practices, and principles and completion of required work order documentation. Coordinate with Lead Mechanic and/or Project Manager regarding the procurement of parts/materials and supplies for ongoing repairs and maintenance. Maintains a clean and safe work area, ensuring building and shop cleanliness on a routine basis. Qualifications: Five (5) years of experience is preferred; specialized vocational, technical or other formal training may be substituted in part for experience. Ability to read, understand, and follow technical manuals to ensure proper diagnosis and repair. Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. Must be able to lift and/or move up to 50 pounds. May be required to reach, kneel, walk, stand and use repetitive motion for several hours at a time based on position duties. Requirements: Required to have own toolbox or tool cart. Valid state CDL-B Driver's License is required with the ability to obtain and maintain coverage by Tessera's insurance carrier. Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

General Job Information There is only one city in the country that can say it is the Nation's Capital - Washington, D.C. Given that distinction, The Metropolitan Police Department is the premiere law enforcement organization in the city. We receive over 22 million visitors a year, have almost 700,000 residents, and 21,000 private business. The Department consists of more than 4,200 members: approximately 3,550 sworn members and over 650 civilian employees. We are one of the most diverse and highly trained departments in the country. We have the honor of safeguarding and protecting not only our nation's residents, but also people from all over the world. The Metropolitan Police Department (MPD) offers an attractive benefits package. The benefits package includes competitive compensation, health insurance, prescription drug coverage, dental, vision, short and long term disability and life insurance, as well a strong retirement benefit and savings options. Employees are also eligible for our employer contributed 401a plan after one year of employment. Additional perks such as discounts on wireless carriers, gym memberships, amusement park tickets and much more! Additional information can be found at: DCHR Benefits This position is located in the Metropolitan Police Department (MPD), Homeland Security Bureau (HSB), Special Operations Division (SOD), Air Support Unit (ASU). The ASU maintains and certifies all aircraft for suitability. The primary purpose of this position is to ensure the air worthiness of departmental aircrafts by performing a wide array of work involving aviation maintenance and repairs. This Aircraft Mechanic position is covered under the National Association of Government Employees (NAGE) bargaining unit and you may be required to pay an agency fee through direct payroll deductions. The incumbent will be responsible for the following: * Ensures the airworthiness of MPD aircraft, including disassembly, repair, overhaul, inspection, and modification of helicopters, to include major assemblies, sub-assemblies, components, and related systems. * Monitors and ensures compliance with all inspections and airworthiness directives as required by the Federal Aviation Administration (FAA) and the aircraft manufacturer. * Conducts inspections, diagnoses malfunctions, and troubleshoots to determine aircraft malfunction and other technical problems. * Performs operational checks of systems using external power sources, powered ground equipment or functional tests. * Removes, disassembles, inspects, repairs, adjusts, overhauls, modifies, reassembles, and installs or replaces major assemblies, sub-assemblies, components and systems, such as, hydraulic pump assemblies, main and tail rotor assemblies, drive shafts, transmissions, gearboxes, and other powertrain units, cooling fan assemblies, control valves, etc. Installs, connects and adjusts fuel, electrical and hydraulic systems. * Applies theory, operation, and integration of all mechanical, hydraulic, electrical, and other operating systems to troubleshoot malfunctions from pilots and flight crew reports of any discrepancies; as well as from observations during inspections and run-ups. * Applies the start up, operation, shutdown, and emergency procedures for the systems and the aircraft to determine symptoms of normal and abnormal operation, inter-relationships between operating systems, and any applicable safety procedures to prevent damage to equipment or injury to personnel. * Interprets technical data and guidelines, makes recommendation for additions to guidelines and the safety and housekeeping of the aircraft and work area; recognizes unsafe maintenance conditions and grounds aircraft when appropriate. * Installs and aligns fuselage and airframe parts; builds up, balances, aligns, and installs main and tail rotor assemblies. Performs temporary and permanent repairs to airframes and operates ground-handling equipment to move aircraft around the work and flight line areas. * Determines when to assign aircraft to the vendor for repairs and replacements; performs a quality assurance check to ensure that work is done correctly and aircraft is ready to return to service. * Accompanies the ASU crew to outside maintenance facilities when needed. * Performs pre-flight, daily and post-flight inspections and conducts operational checks on aircraft systems, to include accompanying pilot on test flights of aircraft to make visual and audio checks of the aircraft. Performs operational ground checks, makes final adjustments, tracks main and tail rotor blades, adjusts the pitch of blades, checks oil, fuel pressure, and vibration and makes required adjustments as necessary. * Attends all mandatory aircraft inspection and repair training. * Performs other related duties as assigned. Qualifications * Skill and a thorough knowledge of the make-up, operation, interrelationships, and installation of a variety of rotary wing aircraft systems, assemblies, structures, and surfaces. * Skill to diagnose malfunctions throughout these systems, assemblies, and surfaces and determine whether repair or replacement is needed. * Experience as a technical expert and authority as a helicopter mechanic. * Skill in the removal, replacement, and adjustment of various systems, assemblies, surfaces, or any components/parts, and in functional testing. * Skill in the use and readout of powered ground equipment, test stands, and cockpit instruments and gauges. * Skill in the use of tools common to the aircraft trade to determine the extent of repairs. * Experience in aircraft malfunctions and technical problems troubleshooting. * Skill in connecting, meshing, aligning, and adjusting the surfaces, assemblies, and systems with one another. * Proficient in the use of Tracware, Access Software AIRPAX, maintenance record software CALM, and aircraft log manager; Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Licensures, Certifications and other requirements Successful completion of a training program in airframe and powerplant mechanics, or similar, through the Federal Aviation Association (FAA) is required. FAA Certified Mechanic in Airframe and Powerplant is required. Education Bachelor degree in a related field of study, preferred. Work Experience Three (3) years of relevant experience in Turbine Helicopter maintenance and repair is required. Work Environment Work is performed in varied settings and environmental conditions associated with flight line/airport/heliport/off base operations. Dirt, grease, and dust are often present. Aircraft fluids, such as oil and hydraulic fluids may irritate the eyes or skin. Flight line aircraft maintenance duty is inherently dangerous, and requires adherence to safety procedures. Mechanics are subject to cuts, bums, electrical shocks, strains, etc. Subject to exposure to high frequency and high-intensity noises that require wearing hearing protection. Other Significant Factors Promotion Potential: No Known Promotion Potential This position operates within the confines of a 24/7 operation. Incumbent of this position is required to provide after-hours on call technical support including weekends and holidays. Incumbent may also be subjected to rotating shifts, weekend work and changes in days off. This position is deemed as "Safety Sensitive" pursuant to Chapter 4 of the D.C. Personnel Regulations, in addition to the general suitability screening, individuals applying for or occupying security sensitive positions are subject to the following checks and tests: * Criminal background check; * Traffic record check (as applicable); * Consumer credit check (as applicable); * Reasonable suspicion drug and alcohol test; and * Post-accident or incident drug and alcohol test. A background investigation is required for positions with the Metropolitan Police Department. The incumbent is required to possess and maintain a valid motor vehicle operator's permit. The District of Columbia Government is an Equal Opportunity Employer: all qualified candidates will receive consideration without regard to race, color, religion, national origin, sex, age, marital status, personal appearance, sexual orientation, gender identity or expression, family responsibilities, matriculation, political affiliation, genetic information, disability. Sexual harassment is a form of sex discrimination, which is also prohibited. In addition, harassment based on any of the above-protected categories is prohibited. Click here to review additional information Employee Disclosure & Information for Applicants

The Distribution Mechanic III is responsible for maintaining and repairing all equipment, piping systems, valves, and machinery at our power plant located in Baltimore, Maryland. This is a full-time, hourly, union position and reports to the Distribution Manager. The compensation for this position is $34.16 per hour plus a 10% bonus target. Responsibilities Maintain safe working conditions in accordance with established Company policies Identify, report and/or correct unsafe work environments Operate all hand/power tools in a competent manner Install, repair, replace, and trouble shoot piping systems, valves, steam traps, pumps Perform preventive maintenance as scheduled Must be able to work overtime as required Exercise caution in the use and maintenance of all company equipment Respond to emergency situations immediately and work quickly to correct the problem(s). Participate in training to continue education and skills in craft Demonstrated ability to communicate orally and in writing Perform other duties as assigned by Distribution Manager Participate in training to further welding skills, as needed by the department Takes rotating, on-call (beeper) on weekends, back shifts, and holidays Must be able to work overtime as required Basic Qualifications HS Diploma or GED Minimum one year experience in an industrial maintenance setting Preferred Qualifications Ability to work with minimum supervision Ability to perform basic computer operations and use email Other Qualifications Valid MD 4th or 5th Grade Stationary Engineers License Minimum one year Pipefitting experience Minimum one year Welding experience Minimum one year Rigging certification Physical Requirements Must possess a valid driver's license and insurable by Company's vehicle insurance carrier. Must have and maintain a driving record meeting the standards of the company. Must complete pre-employment screenings including a company physical exam in addition to drug testing. Ability to lift and maneuver up to and including 50 pounds. Ability to work in confined spaces. Ability to climb and tolerate heights up to 100 feet. Must be able to walk, stand, lift, climb, bend, kneel, stoop, and/or reach. Ability to tolerate heat in an industrial production plant environment. Benefits Personal Leave FMLA up to 12 weeks based on approval Nonpaid benefit Paid Time Off (PTO) 120 hours accrued annually which equals 4.62 hours per pay period Sick Leave 40 hours per calendar year prorated based on month of hire Paid Parental Leave 100% pay up to 160 hours upon birth or adoption of a child; must be used in weekly increments 7 paid holidays annually Floating holidays 40 hours per calendar year prorated based on month of hire 401K plan Including Roth option with matching contributions: 100% of first 1% your contributions and 50% of the next 5% of your contributions.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits? Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What's in it for YOU: * Competitive Pay Rates! Starting rate - $33.32/hour * 40 hours a week, not flat rate * OT as needed over 40 hours * Full Benefits: Medical, Vision, Dental, Life, Supplementals (STD, LTD, FSA, AD&D, etc.) and 401K plan * PTO, Paid Vacation and Sick (accrued) * Company provided uniform * (9) Paid Holidays * Maximum Boot Allowance of $250 (per anniversary) * Quarterly Attendance Bonus - If an employee does not rceive more than (2) attendance points during the previous 12 months-earn (1) Attendance Bonus Day. Year (2) you could earn (1) Bonus Paid Time Off Day and (1) Quarterly Attendance Bonus. Also, an employee who receives no attendance points will receive a quarterly bonus of $50. Paid in 1st week of second month following the quarter. * Corporate partner discount program * Career advancement through a national company Duties include, but are not limited to the following: * Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components. * Perform scheduled preventative maintenance of vehicles * Execute major and minor repairs of defective components. * Document all activities in MV's Fleet Management System. * Maintain work environment in an organized and safe condition. Qualifications Talent Requirements: * High school diploma or equivalent. * Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. * Must be able to pass a pre-employment drug screen and random drug testing. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Company: Keystone Aerial Surveys, a Vexcel Company Why Work With Us? Keystone Aerial Surveys, a Vexcel company, is at the forefront of high-resolution aerial imagery and geospatial data. Our cutting-edge services power industries like government, insurance, telecommunications, and more. If you're passionate about aviation and want to work with the best in the field, this is your opportunity! What You'll Do: As our A&P Mechanic with IA (preferred), you'll take the lead in maintaining, repairing, and inspecting our aircraft to the highest standards. You'll also handle the installation and removal of our advanced aerial cameras and sensors, ensuring everything is flight-ready and FAA-compliant. Responsibilities: Ensure aircraft and equipment compliance with all FAA, OSHA, industry, and company guidelines, maintaining them in a clean and orderly condition Complete necessary maintenance, repairs, and/or replacements on aircraft, subsystems, and components Install and/or remove a variety of aerial cameras and sensors in compliance with FARs and manufacturer's installation procedures Perform inspections and preventive maintenance of aircraft and equipment, managing and scheduling maintenance events Conduct 50/100/Annual inspections with certification as per IA requirements Maintain a clean, safe, and orderly environment in hangars, workshops, and other areas Maintain complete and accurate maintenance records and reports

Job Title: Mechanic FLSA Status: Non-Exempt Frontier Railroad Services, LLC is a railroad construction company based in New Stanton, PA performing new construction and rehabilitation for customers in the Eastern United States. SUCCESSFUL INDIVIDUALS ARE WILLING TO WORK AS A TEAM AND TAKE A HIGH DEGREE OF PERSONAL SATISFACTION IN A HARD DAY'S WORK. Job Description This individual will be responsible for working in an outdoor environment repairing and maintaining railroad construction equipment. Essential Functions: Troubleshoot and repair equipment - electrical, hydraulic, diesel and mechanical. Provide training and technical knowledge on full range of equipment. Perform scheduled preventive maintenance activities on equipment. Provide clear work order documentation and reports when needed. Ensure compliance in all railroad, safety, health, and environmental regulations, policies and procedures for a goal of zero incidents and injuries. Report to the Project Superintendent with a dotted line to the equipment manager. Overall responsibility for keeping all machine running efficiently. Stay in constant contact with the equipment manager and have E/M order parts as needed and as frequently as required to keep the gang up to optimal performance. Perform all repairs as necessary both emergency and permanent repairs on a daily basis. Maintain a set of tools required to perform the work. Ensure that all equipment operators perform greasing, safety and oil checks daily and that records are maintained in accordance with FRA regulations. Overall support for the gang as necessary inclusive of operating a machine in emergency situations. Report to the E/M every night on the needs for the following day/turns. Provide support as needed to move equipment from jobsite to Jobsite. Perform other duties as assigned. Additional Responsibilities: Evaluate and make recommendations regarding required repairs. Provide a high level of communication with home office and supervisory staff. Employee is responsible for supplying steel toe boots and mechanic's tools. Qualifications: Minimum of 2 years of field service or mechanic experience. You must have your own basic mechanic's tools. Prior work experience in an outdoor setting including excessive heat and cold. Must have experience with troubleshooting, repairing and maintaining heavy equipment. Knowledge of mechanical, hydraulic and electrical assemblies and testing experience. Capable of reading variable schematic logic for both low / high voltage electrical and a variety of hydraulics. Basic computer skills. Strong troubleshooting abilities a plus. Detail Oriented. Able to operate company vehicle. Compensation Competitive wage. Medical, dental and vision care. Life insurance and disability. 401k retirement plan. Daily per diem in most cases. Hotel and travel expenses paid in most cases. Opportunity to advance with a growing company. Unfortunately, due to the number of applications we receive, we will only contact those individuals we believe would be the best match for the requirements of the position. EEO Statement: Frontier Railroad Services provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Frontier Railroad Services complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Lime is the largest global shared micromobility business, operating in close to 30 countries across five continents. We're on a mission to build a future where transportation is shared, affordable and carbon-free. Our electric bikes and scooters have powered more than one billion rides in cities around the world. Named a 2025 Time 100 Most Influential Company, Lime continues to set the pace for shared micromobility globally, spurring a new generation of clean alternatives to car ownership. We are looking for Mechanics to maintain our fleet of shared vehicles. This role is ideal for mechanically-inclined operations professionals that want to broaden and build their career experiences. Teamwork is at the heart of our operation, as mechanics work together to identify critical parts of our product lines that can be improved and ensure the safe working condition of our fleet. What you'll do: * Ensure operational compliance of fleet and complete quality checks for deployment * Perform repairs from basic maintenance to complex electronic part replacement * Follow established safety procedures to ensure Lime riders are on the safest vehicles * Manage battery operations such as inspection, rotation, check in/out, and more * Ensure accurate documentation of completed quality checks for vehicles and parts * Support inventory management and organization of tools, parts, and vehicles * May assist with any level of tire maintenance including changes, inflation, or assembly * Maintain and abide by safety and hygiene standards within the warehouse * Maximize the number of operational vehicles by efficiently completing tasks assigned * Safely operate a pallet jack or push cart on a frequent basis * Additional job related tasks as assigned About you: * Must be at least 18 years of age * Experience in a similar industry preferred * Ability to lift up to 65lbs / 35 kg on a frequent basis required * Knowledge of cell phone applications. iOS experience preferred * Ability to work various shifts including evenings and weekends * Experience safely operating a pallet jack or push cart * Strong problem-solving skills, with the ability to perform quick and efficient repairs * Self-motivated with and the ability to work independently with minimal supervision * Strong organizational skills with the ability to manage daily tasks * A safety-oriented mindset, capable of conducting rigorous quality checks * Excellent communication skills with the ability to work well within a team This is a contracted position employed and compensated by a third-party employer. By submitting an application, candidates acknowledge and agree that Lime may share their submitted information with the designated third-party employer, who may then contact them regarding the role. Compensation and benefits, if any, are determined and provided solely by the employer of record. If you want to make an impact, Lime is the place for you. Not sure if you meet all the qualifications? If this role excites you we encourage you to apply. Explore all opportunities on our career page. Lime is proud to be an Equal Opportunity Employer. We believe different perspectives help us grow and achieve more. That's why we're dedicated to building and developing a team that reflects a wider range of backgrounds, abilities, identities, and experiences. If you require a reasonable accommodation during the application or hiring process, please email recruiting-operations@li.me for assistance.

The Hydrovac Diesel Mechanic is responsible for ensuring the safe, reliable, and efficient operation of our diesel-powered hydro-excavation trucks, vacuum units, and related heavy equipment. This position combines proactive maintenance with responsive repairs, and requires strong mechanical, hydraulic, pneumatic, and electrical diagnostic skills. The goal is to minimise equipment downtime, maintain compliance with all regulatory standards (DOT, OSHA, manufacturer), and support our field operations by keeping our fleet ready and safe. Requirements Maintenance & Repairs Perform inspections, diagnosis, and repair of diesel engines, transmissions, chassis, hydraulics, pneumatics, vacuum and blower systems, and associated components. Conduct preventative maintenance services (PMIs) including greasing, fluid checks, belt and hose replacements, alignments and adjustments. Oil changes are performed by an outside service. Carry out comprehensive safety checks on trucks and equipment to ensure fleet road and job-site readiness. Troubleshoot breakdowns in the field and at the shop, perform emergency service calls when required, and coordinate with field crews for fast resolution. Maintain parts inventory, monitor consumable supplies, and ensure required specialty tools are available. Coordinate with field operations teams to schedule work orders, minimise downtime, and maintain operational continuity. Recordkeeping & Compliance Maintain accurate service records, inspection logs, and comply with regulatory requirements (DOT, OSHA, manufacturer) for all fleet assets. Support safety audits, regulatory inspections, and internal fleet review processes. Participate in continuing education, review of technical and regulatory publications, and stay current with diagnostic tools, OEM standards and new equipment technologies. Shop & Work Environment Maintain a clean, safe, orderly shop environment in compliance with company, state and federal safety standards. Operate a wide range of hand and power tools, welding equipment, hydraulics test benches, diagnostic software, and scanning/monitoring tools. Occasionally, travel to job sites or remote locations to assist with field service of hydrovac units or equipment deployment as needed. Lift, move and manipulate heavy objects (tires, drums, components), work in confined spaces, under vehicles or in challenging field conditions. Qualifications Required: High school diploma or GED. Minimum 3 years of hands-on heavy equipment or commercial diesel truck repair experience. Strong mechanical aptitude and diagnostic skills: diesel engines, chassis, hydraulics, pneumatics, electrical systems. Ability to use diagnostic scan tools and mechanical testing instruments. Valid driver's license; willingness/ability to obtain a CDL (Class B or higher) is preferred. Strong communication skills-must coordinate with operations, field team, and document work clearly. Preferred: Experience with hydrovac, vacuum truck or industrial service equipment (e.g., high-pressure water systems, vacuum systems). Welding/fabrication experience (MIG/TIG/Stick) and familiarity with OEM repair procedures. Knowledge with electronic diagnostics. Knowledge of DOT compliance, laws, rules, and regulations Benefits Union wages Overtime available Union Benefits Medical, Dental, and Vision Retirement Vacation Training Pension