Mechanic jobs in Hartford, CT - 642 jobs

Maintenance/Custodial/Maintenance General Date Available: as soon as possible Additional Information: Show/Hide Primary Functions Performs a variety of installation, maintenance, alteration, replacement, preventive maintenance and repair tasks on various plumbing fixtures, piping (water, waste, drainage and heating) and systems support equipment, including swimming pool and irrigation systems throughout the various facilities. Include all aspects of the plumbing trade, designing and installing new installations and modifications to existing systems, repairs to all types of piping and piping systems. Cover the duties of the Heating System Mechanic when assigned. Performing all assigned duties in a safe and professional manner and in accordance with Town and Board policies and follows all federal, state and municipal code and ordinances that affect the work being accomplished. These include OSHA and EPA regulations, state licensing requirements, and State and Local code requirements, as well as any other laws, regulations, ordinances, policies, etc. that may apply. Skills and abilities Ability to read and interpret blueprints and engineering drawings, particularly as they pertain to plumbing, irrigation and heating systems and controls. Ability to operate and maintain all tools and equipment used in these trades. Ability to lift a maximum of fifty(50)pounds. Ability to crawl into and work in confining spaces, such as pipe chases/tunnels, top of, or behind, boilers, and from ladders or staging on overhead pipes, boilers, equipment, etc., safely and in accordance with all laws and regulations pertaining to the work including OSHA confined space regulations. Minimum qualifications This person shall; (1) be a U.S. Citizen, (2) be a vocational, trade or high school graduate, or have completed the G.E.D., (3) possess a valid drivers license and a clean driving record, (4) have the ability to read and write the English language at the 8th grade level, and (5) possess the ability to read and interpret blueprints and engineering drawings as they pertain to the particular trade. Must hold CT P1 license for plumbing and S2 license for heating. An F1 or F2 license for fire protection would be a plus. At least five (5) years experience in the plumbing trade and two (2) years experience in the operation, maintenance and repair of low pressure steam and circulating hot water boilers. Must have demonstrable experience in the servicing and maintaining of HVAC equipment, and working knowledge of pneumatic controls, air compressors, and related equipment. Working Conditions Subject to exposure to inadequate light and ventilation. Will be required to wear eye, face, head, hand, foot, hearing and respiratory protection when needed. Will be required to follow all safety procedures at all times. The Board of Education will provide safety equipment required for the safe conduct of the work in accordance with state and federal regulations, town policies and bargaining unit contract. Physical demands Stands, walks, stoops, kneels, lifts, and works in all types of positions. Must be able to lift 50 pounds maximum. Must be able to handle the physical demands of the job, and work at heights on roofs, power hoists, ladders and staging. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. NOTE: This job description is a guide and not all-inclusive of tasks and responsibilities that are part of this position.

Hamilton Connectios is looking to fill a Production Mechanic/ Machine Operator role for a manufacturing company in East Haven, CT. The Ideal candidate can provide full technical support to the production area. Steady, verifiable work history is a must. Please apply or call us at ********** for consideration. Responsibilities: Perform complete review of all machinery to gain a full understanding of operation Review all manuals/ documentation for any guidance needed to maintain full operational knowledge of machinery Establish an inventory for all machinery parts on hand Create a list of all parts that are replaced frequently and create a replenishment system (a spare should always be on hand) Create a log for all interruptions during production Review current schedule to ensure that the production room is set up with all necessary equipment for current jobs, Performs preventative maintenance and line change-overs in an efficient and effective manner prior to day of production Clean and maintain maintenance room Ensure adherence to applicable policies and procedures - Must be able to work both independently and as a team member Communicates and documents all project work activities, and is able to safely perform the most complex, difficult assignments with minimal to no direction and can answer questions or train other personnel in those areas All other duties assigned by management Requirements: Must pass all pre-employment screening Must be able to handle all physical aspects of the job Must have a team first approach with schedule flexibility to drive production Must be authorized to work in the US Must be able to monitor multiple high-speed assembly machines Must ensure quality expectations 1st shift Shift: 7am to 3:30pmPay: $20-$22 an hr DOE

Mechanic JobID: 677 Auto/Vehicle/Equipment Mechanic Date Available: ASAP Requires Valid Connecticut Commercial Driver's License (CDL) that includes the minimum Sub-Classification "B" and valid CDL Medical Card. MECHANIC PUBLIC WORKS DEPARTMENT SUMMARY: Diagnose repairs with software programs; determine the failure, and repair in a safe and effective manor. Repairs and maintains gasoline and diesel powered motor vehicles, construction equipment, street maintenance equipment, and other miscellaneous equipment. Overhauls major operating units such as motors, transmissions, and differentials; dismantles units and inspects parts, and makes necessary adjustments. Repairs air conditioning, electrical, hydraulic and braking systems. Performs oxygen acetylene cutting, welding and brazing, and electromagnetic arc welding and brazing. Performs complete body work and spray painting on vehicles and other equipment. Performs test drives. May respond to road calls and operate equipment for repairs. Must have ability to work after hours if required. QUALIFICATIONS: Requires High School graduate or GED with 5 years' experience in diesel and gas engines, heavy duty trucks, automobiles, construction equipment, hydraulic and air braking systems, and computerized diagnostic programs. Must have experience in making major and minor repairs. Knowledge of automated rubbish trucks preferred. Requires effective communication skills. WORK ENVIRONMENT: Both inside and outside. Exposed to weather, fumes, odors, and dust. May be exposed to toxic conditions. Risk of bodily injury. Perform duties in extreme and all types of weather conditions. Occasionally conduct driving on roadways, highways, etc. PHYSICAL DEMANDS: Heavy manual work. Ability to regularly lift, carry, and/or move up to 50 pounds, and occasionally lift, carry, and/or move up to 100 pounds. LICENSE OR CERTIFICATE: Requires Valid Connecticut Commercial Driver's License (CDL) that includes the minimum Sub-Classification "B" and valid CDL Medical Card. ASE certification is desirable. WORK SCHEDULE/CLASSIFICATION: Monday through Friday, 7:00 a.m. to 3:00 p.m., full-time position, 40 hours per week. BENEFITS: Defined Benefit Pension Plan, generous time off & medical/dental/vision/life insurance package. WAGES: Starting $34.58/hr. (Increases to $35.22 @6 months, $35.82 @1 year.) SUBMIT COMPLETED ONLINE APPLICATION TO: ***************** CLOSING DATE: Open until filled. EQUAL OPPORTUNITY EMPLOYER

Full-time Description Your experience as a heavy equipment/truck mechanic will put you at the top of our list! Hocon Gas is excited to announce the opening of a full time Fleet Mechanic position. The Fleet Mechanic will inspect, maintain, schedule and track repairs on all company vehicles. Job duties are listed below but not all inclusive as we remain flexible with each position at Hocon Gas: The Fleet Mechanic will be ordering his/her own parts and maintaining inventory. Vehicles included are light, medium and heavy-duty straight and service trucks. Knowledge of Propane and or Oil delivery truck pumping / metering systems preferred, but we will train the right individual(s) Welding and light fabrication skills are a plus. Minimum 2 years of Class 3 - 7 truck experience preferred. Must have own tools. Class “B” CDL Required, Tanker and Haz-mat endorsements obtainable within 120 days Ability to pass pre-employment drug screen Wages are based on experience Salary Description $28.00 to $35.00

At Blasius Auto Group, we are focused on making every customer, a customer for life. Motivated, driven and successful employees help support, and solidify an outstanding customer experience, for every client. We reward top performing professionals who are ready to work hard, who care, who are customer centric, and that are motivated as well as driven to exceed expectations daily. Every employee in their position at Blasius Pre-Owned are vital, critical and paramount to our continued success. Our Dealership legacy is to provide every Blasius client with an exceptional experience while offering value that our community has come to expect from an automotive dealership. We are looking for technicians to join our high performance team. If you are tired of where you work, and want to develop and train to be a class leading professional, along with an aggressive career path, in a clean and motivated work environment, then come and see what we have to offer. We are looking for automotive technicians to help build and compliment our high performance team. We provide a great working environment for your talent to be recognized, for the next chapter of your automotive career. Top talent and top performing technicians, are strongly encouraged to apply for this position. What We Offer POTENTIAL SIGN ON BONUS Medical and Dental Insurance 401K Plan Paid time off and vacation Growth opportunities based on performance Paid Training Aggressive Employee vehicle purchase programs available Family owned and operated since 1971 Health and wellness Discounts for employees on parts and service repairs Technician Specific Benefits Uniforms provided Highly productive shop ASE and state inspection certification reimbursement and all training expenses paid to further your career Continued education and web based training available Clean and professional work environment Competitive wages Responsibilities Inspect, communicate and report overall vehicle condition to service advisors, managers and the shop foreman Maintain and treat all Company Shop Equipment as if it was your own Cleanliness of your bay and lift areas as well as all client vehicles is required Consistent and Effective Communication skills to all relevant team members Strong awareness for attention to detail, as well as the ability to effectively listen and resolve conflict Professional work ethic and a positive mindset Required to be on time for your shift, and to be available to work after your shift on occasion during peak times Qualifications Must provide an outstanding communication skillset - communicates effectively with management as well as other employees. Time management - managing one's own time for efficiency and productivity. Basic computer skills, as well as the willingness to advance for more computer (Information Technology) training Clean driving record is a requirement Willing to submit to a pre-employment background check as well as a current drug screening report Experience working as an automotive technician, at a Independent Repair Facility or a Car Dealership.

Job Description At Blasius Auto Group, we are focused on making every customer, a customer for life. Motivated, driven and successful employees help support, and solidify an outstanding customer experience, for every client. We reward top performing professionals who are ready to work hard, who care, who are customer centric, and that are motivated as well as driven to exceed expectations daily. Every employee in their position at Blasius Pre-Owned are vital, critical and paramount to our continued success. Our Dealership legacy is to provide every Blasius client with an exceptional experience while offering value that our community has come to expect from an automotive dealership. We are looking for technicians to join our high performance team. If you are tired of where you work, and want to develop and train to be a class leading professional, along with an aggressive career path, in a clean and motivated work environment, then come and see what we have to offer. We are looking for automotive technicians to help build and compliment our high performance team. We provide a great working environment for your talent to be recognized, for the next chapter of your automotive career. Top talent and top performing technicians, are strongly encouraged to apply for this position. What We Offer POTENTIAL SIGN ON BONUS Medical and Dental Insurance 401K Plan Paid time off and vacation Growth opportunities based on performance Paid Training Aggressive Employee vehicle purchase programs available Family owned and operated since 1971 Health and wellness Discounts for employees on parts and service repairs Technician Specific Benefits Uniforms provided Highly productive shop ASE and state inspection certification reimbursement and all training expenses paid to further your career Continued education and web based training available Clean and professional work environment Competitive wages Responsibilities Inspect, communicate and report overall vehicle condition to service advisors, managers and the shop foreman Maintain and treat all Company Shop Equipment as if it was your own Cleanliness of your bay and lift areas as well as all client vehicles is required Consistent and Effective Communication skills to all relevant team members Strong awareness for attention to detail, as well as the ability to effectively listen and resolve conflict Professional work ethic and a positive mindset Required to be on time for your shift, and to be available to work after your shift on occasion during peak times Qualifications Must provide an outstanding communication skillset - communicates effectively with management as well as other employees. Time management - managing one's own time for efficiency and productivity. Basic computer skills, as well as the willingness to advance for more computer (Information Technology) training Clean driving record is a requirement Willing to submit to a pre-employment background check as well as a current drug screening report Experience working as an automotive technician, at a Independent Repair Facility or a Car Dealership.

WE Transport LLC Responsibility Profile: Assess vehicles and/or machinery to accurately diagnose and repair issues. Liaise with clients and drivers to determine their automotive requirements and communicate vehicular defects or problems. Provide routine inspections of vehicles and inform clients of any issues. Prepare quotes and work estimates as requested. Keep an accurate log of all work performed. Maintain and clean garage equipment and tools to ensure they are always kept in a safe and usable condition. Adhere to company work safety policies. Perform other duties as assigned. Pay range: $25-$35 depending on experience Qualifications One (1) year of mechanic experience. High school diploma. Beacon Mobility is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Beacon Mobility makes hiring decisions based solely on qualifications, merit, and business needs at the time. We Transport / Towne Bus is a premier Long Island-based school bus company serving districts throughout Nassau and Suffolk Counties, New York City, Westchester County, and Bridgeport, Connecticut. A major part of our company's repertoire includes special needs transportation and services for wheelchair-bound individuals.

Services_AME-E524 Mechanic - Full Time - Bridgeport (NJ), United States Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society. We are looking for a Mechanic to join our Services_AME team in United States . Your main tasks and responsibilities: Assembling all types of pump equipment to customer, OEM and industry standard specifications Disassembling equipment to gain access remove, clean and inspect components Inspecting & recording component measurements using instruments, tools and gages and providing inspection report Investigating and determining root cause failure Determining proper materials for repairs as per BOM Contouring impellers and pump casings to meet hydraulic requirements Setting and operating dynamic balancing equipment Performing final testing and inspections To succeed in this role, you will need: Analytical and interpersonal skills Attention to detail Extensive knowledge of and ability to use hand tools, precision measuring and testing equipment and machine shop equipment Minimum five (5) years of pump repair experience Ability to work with limited supervision Ability to travel to and work at customer sites Ability to work overtime What we offer you: 15 days of paid time off and 12 company-paid holiday 401k plan with a 6% match Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability Motivating wellness program Employee Assistance Program Paid paternal leave Gym re-imbursement No visa or work permit support can be provided for this role Our team is looking forward hearing from you! Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment. We are proud to be recognized as a Top Employer 2025 in the USA. [Not translated in selected language]

R10083408 Mechanic (Open) We are looking for you! Pay Range: $28-$32 per/hr. depending on experience and expertise $2000 Driver Referral Bonus (unlimited) Quarterly Incentive Bonus Equipment: Airgas operates a modern and efficient fleet. Most vehicles are under six years old and equipped with driver-friendly technology, such as On Board Computers, collision avoidance technology, latest camera technology and GPS navigation. Excellent Benefits: Airgas offers a full benefits package that includes: Medical, Dental, Vision, Life, AD&D, Short Term and Long Term Disability Insurance, Vacation, Sick, Paid Holidays, 401(k) Retirement Plan with company match, Tuition Assistance and much more! Benefits Start after 30 days of employment. ________________________Are you a MATCH? The primary function of this job is to diagnose and repair highway delivery equipment including hydraulic pumping and product transfer pump, develop and implement solutions to specific problems within the supply chain and logistics environment and troubleshoot/repair diesel tractors, cryogenic trailers, tube trailers and associated equipment in accordance with Airgas policies/procedures and DOT regulations. You will perform preventive maintenance, equipment upgrades, read/interpret equipment condition reports, repair orders, communicate with supervisor/operator for clarification of problems and discuss preventive techniques with operators to minimize future repairs. You will also promote safety of all employees as first priority, processes/products towards zero defects. Are you a MATCH? Required Qualifications 2+ years experience in highway equipment maintenance Experience with a variety of basic hand, power tools and equipment. Must have own hand tools Must be able to communicate in English, both verbally and written; ability to read/understand English A valid drivers license. Preferred Qualifications High school diploma or GED equivalent; technical school classes preferred Basic knowledge of transportation regulations Class A CDL with HazMat; DOT brake certification preferred (Not Required) Computer literacy; Google Chrome, TMT, on-board OEM computer diagnosis systems Someone with solid diagnostic experience in ABS and DEF systems, including maintenance software programs, is driven by results and could excel in the office and on the shop floor. ABS, DEF and experience utilizing maintenance programs is in addition to all other requirements Cryogenics exposure/experience Recruiter: Janice Garcia / ************************ / ************** Employee Benefits: Click Here ________________________ Benefits We care about and support our Airgas Families. This is evident not only through our competitive compensation but also through a comprehensive benefits package that includes medical, dental, and vision plans, short-term and long-term disability, life and accidental death and dismemberment (AD&D) insurance, Employee Assistance Program (EAP), pre-tax commuter transportation benefit, parental leave, vacation, sick time, floating holidays, jury duty and funeral/bereavement leave, and paid holidays for all eligible full-time employees. Additionally, we offer our eligible employees a 401k plan with company matching funds, tuition reimbursement, discounted college tuition for eligible employees' dependents, and an Airgas Scholarship Program for dependent children. Associates who are members of collective bargaining units should review their bargaining agreement to determine whether they are eligible for some or all of the benefits described here and to see any special terms or conditions for eligibility. _________________________ Your DIFFERENCES enhance our PERFORMANCE At Airgas, we are committed to building a workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their race, gender, sexual orientation, religion, disability or any other protected characteristic. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world. _________________________ About Airgas Airgas, an Air Liquide company, is a leading U.S. supplier of industrial, medical and specialty gases, as well as hardgoods and related products; one of the largest U.S. suppliers of safety products; and a leading U.S. supplier of ammonia products and process chemicals. Through the passion and diversity of its 18,000 associates, Airgas fosters a culture of safety, customer success, sustainability and innovation. Airgas associates are empowered to share ideas, take initiative and make decisions. Airgas is a subsidiary of Air Liquide, a world leader in gases, technologies and services for industry and healthcare. Present in 60 countries with approximately 66,500 employees, Air Liquide serves more than 4 million customers and patients. Join us for a stimulating experience: At Airgas, you matter and so does the work you do. As a member of our team, you play an important role in the success of your team, making sure our products are created sustainably and delivered safely and efficiently. In turn, you'll find a welcoming workplace where you're valued for who you are and where you can fill your potential while growing a fulfilling career - whatever path you choose. _________________________ Equal Employment Opportunity Information We are an equal opportunity employer. We welcome all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. Airgas, an Air Liquide Company is a Government contractor subject to the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Section 503 of the Rehabilitation Act of 1973. Airgas does not discriminate against qualified applicants with disabilities, and is committed to providing reasonable accommodations to the known disabilities of such individuals so as to ensure equal access to benefits and privileges of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact us by email at us-accommodationrequest@airgas.com. _________________________ California Privacy Notice

This Job is Located at: 207 Perry Road Bangor, Maine 04401 SIGN ON BONUS AVAILABLE FOR THE RIGHT CANDIDATE! (Based on experience and certifications) Whited Truck Center is a full service new and used car dealer in Bangor, Maine. We provide Top Tier service to customers across multiple counties. We specialize in Heavy Duty trucks and equipment and, as such, we only take best-in-class Technicians to join our best-in-class team. Interested in taking your career to the next level? We're looking for an experienced Peterbilt Technician to join the team. If you have a strong background in truck repair, solid diagnostic skills, and the proper certifications, this is a great opportunity to grow with a supportive, long-standing organization. You'll be responsible for inspecting vehicles, identifying needed repairs, and completing work accurately and efficiently. Benefits: Relocation Assistance & Sign On Bonus Health, Medical and Dental 401K Plan with company match Paid time off and vacation Growth opportunities Employee discounts Tool purchasing assistance Family owned and operated Long term job security Flexible Work Schedule Paid training Responsibilities: Complete repairs listed on work orders promptly and following all company standards Road-test trucks and utilize diagnostic equipment to evaluate system performance Troubleshoot, service, and repair major components, including engines, transmissions, electrical systems, suspension, steering, brakes, and HVAC Work closely with Service Advisors to communicate findings and expected repair times Perform warranty repairs according to the manufacturer's guidelines Document all work performed with accuracy and clarity Qualifications: Minimum of 2 years of hands-on technician experience High school diploma or equivalent Peterbilt certification strongly preferred ASE or additional technical certifications are highly advantageous Solid diagnostic, electrical, and engine repair abilities Strong mechanical aptitude with excellent hand-eye coordination Able to operate advanced diagnostic tools and software Professional, customer-focused communication skills Positive attitude and willingness to keep improving Works well in a fast-paced, team-oriented shop Willingness to learn new repair methods and technologies Valid driver's license with a clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

GENERAL STATEMENT OF DUTIES: Repairs and maintains automobiles, trucks, tractors, heavy equipment and other types of motor driven and mechanical equipment; does related work as required. SUPERVISION RECEIVED: Works under the guidance of the Equipment Mechanic who assigns specific tasks and inspects work in progress and upon completion for effectiveness. Overall supervision is provided by the Fleet Manager or Their designee EXAMPLES OF DUTIES: Maintains and repairs automobiles, trucks, snow plows, hoists, spreaders, scrapers, cranes, sprayers, tractors, payloaders, backhoes, snow removal equipment, hand-operated and other machinery; relines and adjusts brakes; re-faces valve seats and grinds valves; installs and adjusts main and connecting-rod bearings; installs special accessories such as fans, heaters, spreaders and other miscellaneous equipment; assists in setting up, adjusting, operating and maintaining equipment for testing brakes, wheel alignment, compression, generator, battery, starting motor, lights, ignition, and carburetion; adjusts valve and ignition timing, wheel alignment, shock absorbers, carburetor settings and generator charging rate; removes and replaces worn parts and reassembles transmissions, differentials, hydraulic and mechanical brake systems, springs, clutches, steering gear assemblies, front and rear axles, ignition and fuel systems, exhaust systems, starters, generators and magnetos; hones cylinders; replaces bushing, reams and fits wristpins; fits compression and oil rings; repairs bodies and chassis by straightening and welding fenders, bumpers, axles and frame members, builds and repairs tool boxes, seats stake body parts and side and tail gates; does necessary body painting by hand or with spraying equipment; services equipment with gas, oil, air, water and winter protection and fills out records. Able to use computerized equipment.

Job Description This position is responsible for accurately fulfilling customer orders, and loading and unloading trailers going to and from both external and internal customers. Essential Job Functions Maintain and repair, as needed all mechanical work aspects of the animal housing area. Included but not limited to manure belts, feed and water machinery, egg removal equipment, fans, air-inlets, etc. Be available at all times during egg processing in the event machinery needs repair. Monitor feed, water equipment for efficiency, and make necessary repairs as needed. Daily maintenance of manure belts and scrapers to assure they remain in good working order at all times. Inform manager immediately if belts or scrapers are not operating. Daily checks of the lighting, replace bulbs as needed, and record as required. Maintain a maintenance schedule as directed by manager. Monitor all equipment regularly to be pro-active in preventing damage and make necessary repairs as recognized. Troubleshoot problems and determine most cost efficient means of repair. Maintain record of all repairs in a clear accurate manner. Assist co-workers as needed in performing all Animal Caretaker job duties as needed. General Mechanic Capability Mechanical Skills Other job related duties. Qualifications High School Diploma preferred. Working knowledge of Microsoft Word, Outlook and Excel preferred. 2-3 years' experience working with/on complex machinery with an ability to troubleshoot. Physical Requirements Ability to lift up to 50lbs. Position requires repetitive lifting, squatting, twisting, turning, kneeling and bending. The above statements are intended to describe the general nature and level of work. It is not intended to be an exhaustive list of responsibilities and may be revised at any time.

Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Job Type: Contract-to-Hire Per Diem: $870 USD per week, applicable to employees residing more than 150 miles from the Service Center. A&P Mechanics play a key role in maintaining the safety and efficiency of customer aircraft. You'll troubleshoot, repair, inspect, and perform maintenance tasks while working closely with clients to find solutions. Troubleshoot, repair, install, inspect, and maintain aircraft. Document work per manuals and regulatory requirements. Follow safety and Environmental Health & Safety policies. Participate in 5S activities to maintain a clean workspace. Operate ground support equipment as required. Perform mechanical/electrical component removals and installations. Provide off-site maintenance support when needed. Assist with fueling, engine removal/installation, and component repairs Qualifications Valid A&P license by the FAA 3 years of corporate experience (Bombardier and Gulfstream preferred) Own basic hand tools and manage tool inventory. Ability to interpret mechanical engineering drawings. Must obtain required Ground Support Equipment qualifications. Willing to work unscheduled overtime, including weekends and holidays. Able to work outdoors in all weather conditions. Basic PC skills. Ability to obtain a SIDA badge (if applicable). US Citizenship or authorized to work in the U.S. without visa sponsorship Additional Information Here's a heads-up of the upcoming steps: Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. Interview with the Hiring Manager Offer Letter: We´ll extend you an offer and start the onboarding process. Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions You start your next challenge! Segula offers a comprehensive benefits package to all Full-Time Employees. New Hires are eligible for benefits on the 1st day of employment. Medical ,Dental and Vision coverage Employee life insurance Short & Long-Term Disability Voluntary Term Life, AD&D, & Critical Illness 401(K) with a Segula match

Experience in retubing firetube and watertube boilers.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $18.00 to $22.00/hour. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Schedule: Sunday-Wednesday 8pm-6:30am Compensation starting at $21-$26/per hour Benefits start on day one! Check out a day in the life here: You will contribute by: + Manage the repair of the MHE, including monitoring and trending, troubleshooting and repairs and preventative maintenance. + Conduct preventive maintenance (PM's) within manufacturer's guidelines/specifications and established timelines to include oil changes, filter changes, calibration of equipment, belts changes, inspections, adjustments, lubrication, etc. + Responsible for logging time and materials into computerized maintenance management system + Required to interpret and understand plans and specifications, schematics, operating and maintenance manuals + Assist the battery technicians by assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up + Assist the building and refrigeration maintenance teams. Duties will include assisting in general building repairs, electrical troubleshooting and repairs, refrigeration systems repair and maintenance, and other general maintenance activities Environment + Warehouse: Perishable Warehouse (28F to 60F) + Warehouse: Grocery Warehouse (50F to 90F) Skills + Knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, internal combustion motors, telescopic masts, reach mechanisms, and steering systems. + Working knowledge of AC/DC electrical systems as they pertain to the preventative maintenance, troubleshooting and repair of MHE. + Detailed knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, and electrical controls including PLC systems. + Detailed knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, internal combustion motors, telescopic masts, reach mechanisms, steering systems, suspension systems, etc. Years Of Experience + 1-2: Experience logging work orders and PMs into computerized tracking systems. Experience with Crown, Raymond, and Toyota material handling equipment a plus. We Offer + Benefits available from day 1 (medical, dental, vision) + Company Matched 401-k + Paid training + Weekly Pay + PTO and Holiday Pay offered + Career Progression Opportunities + Tuition Reimbursement + Employee Health & Wellness program + Employee Discounts / Purchasing programs + Employee Assistance Program + C&S Offers $100 towards the purchase of safety shoes Every person matters. We keep our values alive through a culture that embraces differences and ensures that every person matters. The Fine Print This Job advertisement does not constitute a promise or guarantee of employment. This job advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of C&S Wholesale Grocers. Qualifications High School Diploma - General Studies, KPIs, Safety & Sanitiation, Training & Development, Values & Teamwork, Warranty Shift 3rd Shift (United States of America) Company C&S Wholesale Grocers, LLC About Our Company C&S Wholesale Grocers, LLC is an industry leader in supply chain solutions and wholesale grocery supply in the United States. Founded in 1918 as a supplier to independent grocery stores, C&S now services customers of all sizes, supplying more than 7,500 independent supermarkets, chain stores, military bases and institutions with over 100,000 different products. C&S also proudly operates and supports corporate grocery stores and services independent franchisees under a chain-style model throughout the Midwest, South and Northeast. We are an engaged corporate citizen, supporting causes that positively impact our communities. Working Safely is a Condition of Employment at C&S Wholesale Grocers, LLC. C&S Wholesale Grocers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. The Company provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Company: C&S Wholesale Grocers, LLC Job Area: Facilities - Maint Job Family: Facilities Job Type: Regular Job Code: JC0979 ReqID: R-265993

Seeking a highly dependable Commercial & Industrial Boilermaker to join our team in East Windsor, CT! Our Company: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers as well as a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 98-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England. Sole focus on integrating and supplying engineered products, services, and complete thermal systems Longstanding relationship as a manufacturer's representative with a 98-year history Premier product supported by factory authorized local technicians For more information about our company, please visit our website via the following link: ***************************** Ideal Candidates will be in alignment with Blake Thermal's Core Values: Customer Focused Opportunity is Earned Solutions Provider Trustworthy Driven to Succeed Confident but Humble Summary: You're smart, love to learn your trade, aren't afraid of hard work, and believe that with the right training and support, you could become a highly qualified professional. For this position, we are seeking an exceedingly ambitious associate to be trained for the role of Commercial & Industrial Boilermaker. Ideal candidates are eager to gain education and develop practical skills, participate in training on and off the jobsite, observe all safety codes, complete assessments, and carry out as assigned. To be successful as boilermaker you must have great customer service skills as well as a drive for high-quality results. Outstanding applicants are those who are quick-learners, excellent communicators and take pride in representing themselves and Blake Thermal in the most professional way. Responsibilities: Actively participate in a variety of training and educational opportunities with interim assessments. Assist within the department, developing new skills and capabilities within the Thermal Energy and Manufacturers Representative industry. Observe and adhere to all safety procedures. Complete all assignments in an efficient, timely, professional manner. Keep an open mind when receiving feedback and constructive criticism. Communication with manager and colleagues on a day to day basis. Travel to a variety of jobsites, including but not limited to commercial and industrial settings. Learn to install, maintain, and repair Commercial/Industrial Boilers and related thermal equipment. Requirements: High school diploma or GED. Connecticut G-8 License Must maintain a valid Driver's License to drive rental vehicles & be able to pass a DOT physical for driving fleet vehicles as required. A CDL is not required. Maintain company provided equipment, tools, and/or fleet vehicle as per company policy. Possess a can-do attitude when approaching new and exciting challenges. Ability to multitask. Attention to detail. Must be at least 18 years old. Pass a pre-employment drug test and criminal background check. Skilled with computers/systems. Able to read, write and possess excellent verbal communications skills in English, other languages a plus. Physical Requirements: Moderate to occasional heavy physical demand with exposure to dust in the warehouse, hot and cold climates, inside and outside exposure when on the job, odors and noise may also be present. Ability to lift up to 75 pounds. Stand, reach, bend, squat, push, pull and move about the facility or job-site. Walk or stand at least 8+ hours per day, often ascends/descends ladders or steps on job-site. Able to use hands and able to follow safety guidelines, for both mechanical tools, manual tools, and computer entry. Benefits Professional experience within the trade. Opportunity to build a career in this industry. Compensation commensurate with experience. Periodic compensation increases with completion of advanced training modules. Shadowing, mentoring, and training opportunities with seasoned professionals. This opportunity offers a competitive salary (commensurate with experience) 401k, generous health benefits, company paid life/ AD&D, company paid training with future advancement opportunities. Blake Thermal Sales & Service, Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Blake Thermal Sales & Service, Inc. is a proud drug-free workplace.

Position Title Garage Mechanic Department Custodial Services -Group Pay Type Non Exempt Appointment Type (A) Continuing Full-Time Hours Per Week 40 Number of weeks 52 weeks per year other - # of weeks 52 Benefits Eligible Full Benefits Geographical Regional Qualifies for Relocation Reimbursement No Work Schedule Job Description General Scope of Duties Maintain, repair and overhaul automotive vehicles and grounds keeping equipment with gasoline, diesel or electric driven engines or motors and other associated mechanical, hydraulic, electrical, and electronically controlled systems. General Duties and Responsibilities * Troubleshoot, adjust, disassemble, repair, replace, and/or rebuild components of various automotive systems such as engines, transmissions, differentials, transaxles, carbureted & electronic fuel injection systems, emission control systems, charging & starting systems, power steering and other power assisted systems, braking systems, electrical, electronic, hydraulic, fuel and other assemblies, and make independent judgments based on specifications in technical manuals and using accepted trade practices * Isolate and repair malfunctions using a combination of visual and auditory examinations and a wide variety of test equipment such as computerized engine analyzers, compression testers, test benches, oscilloscopes, multi-meters, and special precision feeler and dial gauges * Service & repair grounds keeping equipment such as mowers, sweepers, blowers, vacuums, edgers, line trimmers, spray equipment, and heavy equipment such as loaders, backhoes, bobcats, and lifts * Develop procedures and perform preventive maintenance on vehicles, groundskeeping equipment and emergency generators such as changing oil & lubricants, inspecting, inventorying, changing filters, adjusting & replacing belts, and setting up PM schedules using the department's maintenance management system (CMMS) * Order, dispense and inventory fuel and lubricants maintaining records of consumption * With the assistance of the departmental administrative office, renew vehicle registrations and emission inspection to comply with motor vehicle regulations * Estimate costs for repairs to vehicles and equipment and order parts, supplies and equipment while maintaining an inventory of spare parts * Keep garage clean and free of hazards while complying with OSHA, EPA and other federal, state and local safety and health requirements * Perform pre-treatment and snow and ice removal Education and Skills * A combination of education and experience that provides a demonstrated knowledge of skilled journey-level engine mechanic duties * Ability to read and write English, communicate effectively, and keep written and computer records * Possess and maintain a valid driver's license and have the ability to effectively and safely operate a variety of vehicles, tools and equipment necessary to carry out assignments * Ability to estimate labor and material costs * Ability to work independently with little direction and under pressure * Ability to interact with a wide variety of people from all aspects of the College and community * Ability to lift up to 50 pounds unaided * Must be available for call back for snow and other campus emergencies Preferred Qualifications Physical Demands NA Driving Required Yes Salary Range $27.18 Note Connecticut College is committed to fair and competitive compensation. The final offer will reflect the candidate's experience, education, and the institution's pay structure to ensure internal equity. Applicant Credentialing Thorough applicant credentialing will be conducted on the selected candidate which will include criminal records check, DMV check and depending on the position psychological exam and pre-placement physical. Posting Detail Information Open Date 01/16/2026 Applications accepted through Open Until Filled No

As a Material Handling Equipment (MHE) Technician, you will repair and maintain electric and propane industrial lift trucks, pallet jacks, scissor lifts, and/or cherry pickers. You will follow manuals and use hand tools, power tools, and knowledge of electrical, power transmission, brake, and other mechanical systems. Job Description Schedule: Wednesday-Saturday 4pm-2:30am Compensation starting at $22-$26/per hour Benefits start on day one! Check out a day in the life here: *********************************** You will contribute by: + Manage the repair of the MHE, including monitoring and trending, troubleshooting and repairs and preventative maintenance. + Conduct preventive maintenance (PM's) within manufacturer's guidelines/specifications and established timelines to include oil changes, filter changes, calibration of equipment, belts changes, inspections, adjustments, lubrication, etc. + Responsible for logging time and materials into computerized maintenance management system. + Required to interpret and understand plans and specifications, schematics, operating and maintenance manuals. + Assist the battery technicians by assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up. + Assist the building and refrigeration maintenance teams. Duties will include assisting in general building repairs, electrical troubleshooting and repairs, refrigeration systems repair and maintenance, and other general maintenance activities. Environment + Warehouse: Perishable Warehouse (28F to 60F) + Warehouse: Grocery Warehouse (50F to 90F) Skills + Knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, internal combustion motors, telescopic masts, reach mechanisms, and steering systems. + Working knowledge of AC/DC electrical systems as they pertain to the preventative maintenance, troubleshooting and repair of MHE. + Detailed knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, and electrical controls including PLC systems. + Detailed knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, internal combustion motors, telescopic masts, reach mechanisms, steering systems, suspension systems, etc. Years Of Experience + 1-2: Experience logging work orders and PMs into computerized tracking systems. + Experience with Crown, Raymond, and Toyota material handling equipment a plus. + Candidates from an automotive or wheeled-army mechanics encouraged to apply We Offer + Benefits available from day 1 (medical, dental, vision) + Company Matched 401-k + Paid training + Weekly Pay + PTO and Holiday Pay offered + Career Progression Opportunities + Tuition Reimbursement + Employee Health & Wellness program + Employee Discounts / Purchasing programs + Employee Assistance Program + C&S Offers $100 towards the purchase of safety shoes Every person matters. We keep our values alive through a culture that embraces differences and ensures that every person matters. The Fine Print This Job advertisement does not constitute a promise or guarantee of employment. This job advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of C&S Wholesale Grocers. Qualifications High School Diploma - General Studies, KPIs, Safety & Sanitiation, Training & Development, Values & Teamwork, Warranty Shift 3rd Shift (United States of America) Company C&S Wholesale Grocers, LLC About Our Company C&S Wholesale Grocers, LLC is an industry leader in supply chain solutions and wholesale grocery supply in the United States. Founded in 1918 as a supplier to independent grocery stores, C&S now services customers of all sizes, supplying more than 7,500 independent supermarkets, chain stores, military bases and institutions with over 100,000 different products. C&S also proudly operates and supports corporate grocery stores and services independent franchisees under a chain-style model throughout the Midwest, South and Northeast. We are an engaged corporate citizen, supporting causes that positively impact our communities. Working Safely is a Condition of Employment at C&S Wholesale Grocers, LLC. C&S Wholesale Grocers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. The Company provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Company: C&S Wholesale Grocers, LLC Job Area: Facilities - Maint Job Family: Facilities Job Type: Regular Job Code: JC0979 ReqID: R-265850