Mechanic jobs in Largo, FL - 1,424 jobs

Academy Bus is seeking a full-time Diesel Mechanic-Class A with hands-on supervisory skills for the PM shift for our Clearwater, FL location. $2500 Sign on bonus. Shift: 3:00pm - 11:30pm Pay Range: $28.00-$34.00 per hour. Pay rate will be based on candidate experience level. Responsibilities: Class A Diesel Bus Mechanic Repair, troubleshooting and diagnosis of modern tour buses Reconditioning, preventative and routine maintenance Inspections and road tests Warranty and repair documentation Diagnosis, inspection, installation, disassembly and cleaning of components such as: brakes, suspension, tires, bearings, seals, radiators, water pumps, coolant hoses, alternators, regulators, steering components, oil/air filters, door assemblies, controls, seats, belts, electric motors, pneumatic valves, cables, and linkages. Respond to road calls Basic welding/fabrication Class A Mechanics will train and supervise Mechanics and Cleaners. Requirements: Diesel Bus Mechanic 7+ years of diesel engine maintenance Proficient in the use of diagnostic devices such as: DDEC readers, ATEC readers, SmarTire, schematics, AIC (Freon) recovery and charging equipment Must have supervisory skills and experience Proven ability to use hands tools, power tools, hydraulic jacks, welding equipment, and testing instruments Must have own tools Valid driver's license Basic computer skills CDL License with Passenger and Airbrake endorsement is a plus but not required, willingness to obtain a CDL License is also desirable. Health Insurance and Benefits Offered Include: Medical, Dental, Vision, and Life insurance Supplemental coverages 401K plan Paid time off Paid Holidays Academy is EEO Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Right Way Elevator (RW) is part of American Elevator Group (AEG), the largest independent elevator service company in North America, consisting of a collection of well-established elevator service companies operating throughout the United States. Backed by Arcline Investment Management, AEG has a significant footprint in the elevator industry and is rapidly growing. We are looking for an experienced Mechanic to work in the St. Petersburg/Tampa, FL metro area to help us continue providing our customers with the best services possible. We are looking for an experienced Technician to help us continue providing our customers with the best services possible. In this role you will be providing repair services on rack and pinion and some hydraulic elevators, ensuring elevators are in proper working order.

At GAF, we cover more than just buildings. We cover each other. Under this roof, you will have the tools and resources you need to grow and develop in your career. You will experience our incredible culture and will be empowered to support your teammates, your customers, and especially your community. Under this roof, we define the future while leading the present through our deep well of experience and our responsibility to the future to drive improvements and innovation in our products. We are GAF. And under this roof, we protect what matters most. SCHEDULE - Night: 6pm-6am ( scheduled 2 - 2 - 3 ) Essential Duties * Complete the safety training required for the Mechanic III. * Within the MAXIMO Asset Management Software, develop work orders details, and add supporting documentation, reports, tests plans, & schedules. * Adheres to all plant safety and environmental guidelines, policies, and procedures while actively participating in the safety program. * Advanced knowledge of lubrication for plant equipment. * Advanced knowledge of vibration analysis. * Advanced knowledge of infrared thermography and ultrasound analysis. * Advanced knowledge of job plans for lubrication, vibration analysis, infrared thermography and ultrasound. * Direct knowledge of optimum lube inventory levels and tracks usage. * Maintains proper lube storage, including 5S standard of storage location. * Creates and prioritizes corrective work orders based upon inspection while performing tasks. * Performs root-cause failure analysis. * Understands how to follow mechanical, electrical, hydraulic, pneumatic, and P&ID drawings, sketches, plans, layouts, and instructions. * Understands how to start up and shut down production equipment. * Identify equipment parts & procure them from the store room. * Direct knowledge of how each segment of the manufacturing process works. * Maintains good housekeeping standards in all work areas. * Develops the continued improvement of production equipment, operation, process, safety, and maintenance programs in conjunction with Operations. * Develops the preventative and predictive maintenance procedures. * Operates Fork Trucks & Man Lifts. * Troubleshoots, installs, aligns, dismantles, repairs, and maintains industrial machinery, mechanical equipment, pneumatic systems, hydraulic equipment, and utility equipment (air compressors, hot oil systems, water, natural gas, emergency generator, etc.) * Installs and repairs mechanical drives, pumps, fans, chains, sprockets, gearboxes, belts, and couplings. * Advanced welding skills using oxy acetylene, MIG, TIG, & arc welding processes. Welding certification required. * Tests performance of repaired equipment and communicates results with operators. * Adjusts functional parts of the equipment and control instruments. * Performs daily preventative maintenance on the equipment, facility, infrastructure, & utilities. * Ensures equipment/plant safety devices are operational. * Maintains accurate maintenance logs including labor hours and critical preventive maintenance findings. * Uses pipefitting skills to weld, cut, fit, maintain, and install piping throughout the facility. * Uses problem solving methods to identify the root cause and eliminate failures. * Has a working knowledge and understanding of HAZMAT, MSDS, EPA, OSHA, NEC, and NFPA requirements. * Attends Operations meetings to catalog current maintenance issues. * Performs periodic proactive asset strategies, such as maintenance routes, preventative maintenance, and other tasks to improve reliability and uptime. * Direct knowledge of reliability-centered maintenance strategies. * Ability to perform basic electrical tasks. Wiring of three phase motors, troubleshooting and replacement of a variety of sensors, etc. * Strong knowledge of instrumentation and controls or equipment and utilizing this knowledge to maintain and troubleshoot equipment. Temperature, pressure, photo eyes, proximity switches, etc. * Introduction to Allen Bradley ControLogix 5000 software (in a view-only mode) to assist the electrician to troubleshoot, repair, & maintain the instrument/electrical, control, & communication systems. * Introduction to Allen Bradley Drive Tools software to to assist the electrician to maintain, install, configure, set-up parameters, and establish communication with VFD's. * Promotes the development of the Operator Interface software (Wonderware) for the purposes of maintenance, machine health, and reliability. Under This Roof, We Require: * High school graduate or equivalent experience * At least 3 years working experience in an industrial manufacturing environment in a maintenance role or equivalent experience preferred. General Knowledge, Skills and Abilities * Competent with the use of Personal Computers, with sound understanding and utilization of Google APPS, and MAXIMO Asset Management Software. * Thorough knowledge and understanding of Arc Flash and electrical PPE requirements. * Excellent Observational skills. * Advanced Math. * Troubleshooting skills for mechanical, pneumatic, hydraulic systems, and utility equipment (Air compressors, hot oil system, water, gas, backup generator, etc.) * AC/DC motor repair/replacement for single phase, and 3-phase power. * Maintenance tools used while working on mechanical, electrical, pneumatic, hydraulic, and utility systems. * Plumbing repair/replacement. * Sound knowledge of instrument/electrical/control/communication principles. * Repair/replace instrument, electrical devices. * Knows how to fabricate with metal and the welding process using oxy acetylene, MIG, TIG, & arc welding tools. * Pump & fan theory, repair, & replacement. * Capable of using calipers, gauges, micrometers, and related measuring equipment. * Comprehension and use of technical manuals. * SPC (statistical process control) charts, graphs, and data for better reliability. * Excellent verbal and written communication skills. * Able to work under limited supervision, and self-motivated. * Excellent organization skills. * Ability to work well with others at all levels of the organization. * Excellent accuracy and attention to detail. Physical Demands * Stationary Position - * Move/Traverse - * Stationary Position/Seated - Frequently * Transport/Lifting - Frequently * Transport/Carrying - Frequently * Exerting Force/Pushing - * Exerting Force/Pulling - * Ascend/Descend - * Balancing - * Position Self/Stooping - * Position Self/Kneeling - * Position Self/Crouching - * Position Self/Crawling - * Reaching - Frequently * Handling - Frequently * Grasping - * Feeling - Frequently * Communicate/Talking - Frequently * Communicate/Hearing - Frequently * Repetitive Motions - * Coordination - Frequently Base salary and/or rate of pay ranges listed are exclusive of fringe benefits and potential bonuses. Individual compensation offers will be determined based on a variety of factors, including but not limited to geographic location, relevant candidate experience and skill, education, and/or qualifications. Base Hourly Rate: $41.44 How We Protect What Matters Most: 1. We offer a wide range of health insurance options that include medical, dental, and vision for you and your family. 2. Our Family-Building benefits support the many different journeys to fertility and parenthood. 3. Other exciting programs and perks are available to help employees achieve work-life balance, including (but not limited to) a wellness program, free financial coaching, a referral program, and product rebates when purchased for an employee's primary residence. 4. We're committed to fostering a culture that reflects our values to connect, empower, evolve, and inspire. We offer many opportunities for employees to connect with one another, including through our Employee Resource Groups who focus on education and allyship for all of our employees. GAF complies with federal, state, and local disability laws and makes reasonable accommodations for applicants and employees with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact HR Services at 833-HR-XPERT. We believe our employees are our greatest resource. We offer competitive salary, benefits, 401k, and vacation packages for all full time permanent positions. We are proud to be an equal opportunity workplace and GAF, Standard Logistics, SGI, and Siplast are proud to be affirmative action employers. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a disability or special need that requires accommodation, please let us know. If applying for positions in the U.S., must be eligible to work in the U.S. without need for employer sponsored visa (work permit).

Industrial Mechanic performs entry maintenance, fabrication, overhaul and repair of mechanical equipment located within a water, wastewater, or reclaimed treatment sewer pump station or LPSS facilities. Assists and/or leads crews in a broad range of preventive maintenance, corrective maintenance, and new equipment installations, and assists with planning and estimating costs of maintenance work. Salary $45,219 - $86,320 Ideal Candidate The ideal candidate will have prior experience in maintenance best practices and procedures that support the duties, responsibilities, and skill sets required of an Industrial Mechanic. This position deals with the maintenance of water, wastewater and reclaimed water equipment such as, but not limited to the following: submersible pumps, dry pit pumps, high head pressure mobile pumps, vertical turbine pumps, split case pumps, progressive cavity pumps, peristaltic pumps, rotary lobe blowers, centrifuges, conveyors, valves, piping, gearboxes, air systems, gas compressors, gas service turbine generators, grit chambers or manual bar screens and chemical systems such as those used in treating H2S gases, water treatment, and wastewater treatment within Water Resources Department systems and Plant Facilities. This candidate will be able to troubleshoot and repair any of the above listed equipment as well as perform predictive and preventative maintenance utilizing the following tools and technologies; perform alignments on pumps and motors, utilize laser alignment equipment on blowers and motors; be able to perform vibration and ultrasound testing on motors, gearboxes, pumps, and blowers with provided vibration and ultrasound tools. Candidate should possess advanced knowledge of preventative maintenance practices, procedures, and techniques for lubrication and greasing of all the above equipment. Candidates should have some background in Stick, TIG, or MIG welding and PVC, CPVC, and flanged piping repairs. Candidates will be willing to work overtime as needed and must understand that participation in a 24/7 after-hours standby rotation program is required after successful completion of probation. Candidates should possess basic computer skills with standard software such as Excel, Word, Outlook, etc., and knowledge of a computer-operated work management system. Some positions may require possession of a CDL driver's license and/or a collection license. Core Competencies Customer Commitment - Proactively seeks to understand the needs of the customers and provide the highest standards of service. Dedication to Professionalism and Integrity - Demonstrates and promotes fair, honest, professional and ethical behaviors that establishes trust throughout the organization and with the public we serve. Organizational Excellence - Takes ownership for excellence through one's personal effectiveness and dedication to the continuous improvement of our operations. Success through Teamwork - Collaborates and builds partnerships through trust and the open exchange of diverse ideas and perspectives to achieve organizational goals. Tier 1 Tier 2 Duties and Responsibilities Note: The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform one or more of the activities described below: Reviews system designs, specifications, and products, attends pre-construction meetings, and recommends changes in water/wastewater/reclaim facilities mechanical systems. Monitors, reviews and validates work practices for quality control assurance of wastewater processes and to ensure adherence to safety standards in operation of water/wastewater/reclaim water facilities. Trouble-shoots problems and recommends corrective actions based on skilled knowledge of mechanical repair practices. Inputs and gathers data from Supervisory Control Data Acquisition system (SCADA), and Comprehensive Asset Management System (CAMS). Runs reports as necessary. Performs preventative maintenance and corrective repair work on water/wastewater/reclaim facilities and equipment. Fabricates and machines repair parts for equipment, with the ability to weld steel, brass, and aluminum. Operates lathes, mill/drill presses, welder and various other metal working power tools as needed. May direct and/or oversee the work of other employees, provide instruction, guidance, and training as required. Locates leaks, and detects defects in water/wastewater/reclaim equipment in conformance to established plans and standards. Expected to temporarily perform duties outside normal classification in the event of a declared emergency. Operates a personal computer and work in software programs associated with job. Completes various maintenance jobs on buildings and grounds. Performs other related duties as required. Duties and Responsibilities Note: The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform one or more of the activities described below: Reviews system designs, specifications, and products, attends pre-construction meetings, and recommends changes in water/wastewater/reclaim facilities mechanical systems. Monitors, reviews and validates work practices for quality control assurance of wastewater processes and to ensure adherence to safety standards in operation of water/wastewater/reclaim water facilities. Trouble-shoots problems and recommends corrective actions based on skilled knowledge of mechanical repair practices. Inputs and gathers data from Supervisory Control Data Acquisition system (SCADA), and Comprehensive Asset Management System (CAMS). Runs reports as necessary. Performs preventative maintenance and corrective repair work on water/wastewater/reclaim facilities and equipment. Fabricates and machines repair parts for equipment, with the ability to weld steel, brass, and aluminum. Operates lathes, mill/drill presses, welder and various other metal working power tools as needed. Direct and/or oversee the work of other subordinate employees, provide instruction, guidance, and training as required. Locates leaks, and detects defects in water/wastewater/reclaim equipment in conformance to established plans and standards. Expected to temporarily perform duties outside normal classification in the event of a declared emergency. Operates a personal computer and work in software programs associated with job. Completes various maintenance jobs on buildings and grounds. Performs other related duties as required. Job Specifications Knowledge of the maintenance and repair of machinery and related mechanical equipment. Knowledge of the water, reclaim, wastewater treatment systems and sewer pump/lift stations and low pressure sewer systems. Knowledge of the operation and maintenance of the water/wastewater/reclaim facilities operating equipment. Knowledge of the principals of hydraulics, electricity, combustion, and standard safety practices. Knowledge on the principles and practices of odor control and/or disinfection processes. Ability to troubleshoot and diagnose equipment problems to determine the proper remedial action to be taken, and to make the necessary repairs to equipment. Ability to understand and follow oral and written instructions. Ability to read piping and electrical diagrams, schematics, and blueprints. Ability to establish and maintain effective working relationships with others. Ability to pass medical testing and to wear various types of respiratory protection deemed necessary for the environment being worked in for the protection of the employee. The types of respiratory protection devices used are (but not limited to) Half Facepiece, Full Facepiece, Filtering Facepiece, Powered Air-Purifying (PAPRs), Supplied-Air, Self-Contained Breathing Apparatus (SCBAs), or Combination Type. Ability to perform predictive, preventive, and corrective maintenance on assigned equipment and machinery. Ability to estimate time, materials, and equipment required for assigned jobs; may requisition materials as required and/or instructed. Ability and willingness to respond to emergency situations such as floods, hurricanes, tornadoes and other natural and/or unnatural crises to provide for public health and safety. Ability and willingness to work overtime, rotating shifts, including nights, weekends and holidays. Ability to use a computer and related software. Ability to operate a fork lift, backhoe, boom/bucket truck or other heavy equipment. Ability to work effectively with others. Job Specifications Knowledge of the maintenance and repair of machinery and related mechanical equipment. Knowledge of the water, reclaim, wastewater treatment systems and sewer pump/lift stations and low pressure sewer systems. Knowledge of the operation and maintenance of the water/wastewater/reclaim facilities operating equipment. Knowledge of the principals of hydraulics, electricity, combustion, and standard safety practices. Knowledge on the principles and practices of odor control and/or disinfection processes. Ability to troubleshoot and diagnose equipment problems to determine the proper remedial action to be taken, and to make the necessary repairs to equipment. Ability to understand and follow oral and written instructions. Ability to read piping and electrical diagrams, schematics, and blueprints. Ability to establish and maintain effective working relationships with others. Ability to pass medical testing and to wear various types of respiratory protection deemed necessary for the environment being worked in for the protection of the employee. The types of respiratory protection devices used are (but not limited to) Half Facepiece, Full Facepiece, Filtering Facepiece, Powered Air-Purifying (PAPRs), Supplied-Air, Self-Contained Breathing Apparatus (SCBAs), or Combination Type. Ability to perform predictive, preventive, and corrective maintenance on assigned equipment and machinery. Ability to estimate time, materials, and equipment required for assigned jobs; may requisition materials as required and/or instructed. Ability and willingness to respond to emergency situations such as floods, hurricanes, tornadoes and other natural and/or unnatural crises to provide for public health and safety. Ability and willingness to work overtime, rotating shifts, including nights, weekends and holidays. Ability to use a computer and related software. Ability to operate a fork lift, backhoe, boom/bucket truck or other heavy equipment. Ability to work effectively with others. Ability to serve as the lead employee as directed on project teams assigned to a given assignment. Physical Requirements May require shift work which will include working nights, weekends, and holidays as well as working extended hours during times of emergency. Employee is expected to be able to work in and around confined spaces such as wet wells, vaults, manholes, trench boxes, tanks, and in areas of height using ladders, man-lifts of any kind, on top of buildings or tanks/structures wearing a harness and protective safety gear and/or in environments where toxic or chemical fumes not natural to the atmosphere exist while wearing protective respiratory equipment, as necessary. Work Category Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Requirements May require shift work which will include working nights, weekends, and holidays as well as working extended hours during times of emergency. Employee is expected to be able to work in and around confined spaces such as wet wells, vaults, manholes, trench boxes, tanks, and in areas of height using ladders, man-lifts of any kind, on top of buildings or tanks/structures wearing a harness and protective safety gear and/or in environments where toxic or chemical fumes not natural to the atmosphere exist while wearing protective respiratory equipment, as necessary. Work Category Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Minimum Qualifications Required Graduation from high school or possession of a GED Certificate; AND Four (4) years of experience in mechanical maintenance and repair/replacement of water and wastewater related equipment; OR An equivalent combination of education, training and experience that would reasonably be expected to provide the job-specific competencies noted above; AND Possession of a valid Florida Driver's License. NOTE: Some of positions in this job classification may require: Possession a valid Class B Commercial Driver's License with tanker endorsement will be required for positions associated with LPPS and Pump Stations. Possession of, or ability to obtain and maintain an appropriate level Florida wastewater collections license. A passing score on a math and technical comprehension test. Minimum Qualifications Required Graduation from high school or possession of a GED Certificate; AND Six (6) years of experience in mechanical maintenance and repair/replacement of water and waste water related equipment; AND Possession of a valid Certified Maintenance and Reliability Technician (CMRT); OR An equivalent combination of education, training and experience that would reasonably be expected to provide the job-specific competencies noted above; AND Possession of a valid Florida Driver's License. NOTE: Some of positions in this job classification may require: Possession a valid Class B Commercial Driver's License with tanker endorsement will be required for positions associated with LPPS and Pump Stations. Possession of, or ability to obtain and maintain an appropriate level Florida wastewater collections license. A passing score on a math and technical comprehension test. Emergency Management Responsibilities In the event of an emergency or disaster, an employee may be required to respond promptly to duties and responsibilities as assigned by the employee's department, the County's Office of Emergency Management, or County Administration. Such assignments may be for before, during or after the emergency/disaster.

Insight Global is looking for Commercial Mechanic to join their team for a 6-month contract to hire opportunity. This candidate will be responsible for performing preventive maintenance and repairs on HVAC systems, boilers, chillers, pumps, and other mechanical equipment. Additionally, they'll be troubleshooting and diagnosing mechanical issues to minimize downtime and ensure operational efficiency. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - 3-4 years of Commercial Mechanical maintenance experience - Must have at least 2 years of commercial experience - Great customer service skills - Any Mechanical Certifications - Hospital experience

Job Title: Mechanic Exempt (Y/N): Yes Reports To: Director of Support Services This position is accountable for coordinating, planning, and supervising specific production activities throughout the Fleet Department, while performing on-line mechanical and administrative duties. This position interacts internally and with various entities externally. Must also provide own mechanical tools that are used as a standard for working on fleet vehicles. Major Duties and Responsibilities: Prompt and regular attendance at work Prioritize, plan, and delegate workloads to fleet personnel, regulate and adjust assignments; personally oversee more complex functions as necessary Responsible for complying with all local, state, and federal laws (i.e. state permits, vehicle tags) Prepare cost estimates related to labor, tooling, machinery, equipment, material, etc.; analyze shop loads and recommend revisions in methods, equipment, tooling, or materials to effect conservation in costs or to avoid production delay Ensure compliance with all company policies and procedures (i.e. sop's. environmental audits, shop reviews, etc.) Responsible for all functions pertinent to preventative maintenance, repairing, record keeping, operation of repair facility, etc., necessary for optimum performance of all vehicles in the fleet Maintain records of parts inventory and document breakdowns of all major and minor repairs and preventative maintenance Participate in departmental and company meetings as required Work as a Vehicle Service Technician when needed Become a Car-Seat Safety Inspector within the first six months of employment Performs other such duties as may be required Minimum Qualifications: High school diploma or equivalent Current Drivers License Trade school diploma or equivalent Minimum of two years experience as a class A mechanic preferred ASE certifications preferred Physical Requirements: Regularly required to use hands to finger, handle, or feel; reach with hands and arms Must be able to talk and hear Must be able to frequently stand and walk May be occasionally required sit; climb or balance; stoop, kneel or crouch Must be able to frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 125 pounds

Monro's family of brands is one of the leading automotive service and tire dealers in the United States. We work on approximately five million vehicles a year, but with us, it is personal. Every guest is important, and every teammate is valued. That is our people-first approach. Headquartered in our hometown of Rochester, New York, where our founder, Chuck August, opened his first store in 1957, we have grown to nearly 1,300 auto repair shops and tire dealers in 32 states from coast to coast. Monro powers 16 highly respected tire and auto service brands, supporting each company's regional strength and community connections. From big cities to small towns to rural crossroads, you will find us in neighborhoods of every shape, size, and color. Under the Monro banner, we are united TEAM, and share the same mission to bring our guests the highest quality tire and auto service in the industry. Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America's leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We're looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships, if you value honesty and integrity - we have a Destination for you at Monro. Destination Monro -Your Career is Here! Job Description Automotive Mechanic/Technician The pay range for this position is between $18.00 and $40.00 per hour, based on experience and credentials. Responsible for the efficient, diagnosis, repair and maintenance of Guest's vehicles, the Automotive Technician position is a great way to start your career at Monro. Starting day 1 you will begin a comprehensive Technician training program, covering all aspects of your new role, while preparing you for the next. As an Automotive Technician for Monro, you will be an essential team member, performing repair services on Guest vehicles. More importantly, you will be part of a team working together to deliver 5 Star Guest experiences, while using your Technician skills to take care of people, their cars and ensure our guests have safe, reliable transportation. Responsibilities Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance, that you are qualified to perform Secure our guests approval to perform the work as a result of the diagnosis; and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Collaborate with teammates and provide leadership to General Service Technicians Qualifications Minimum Qualifications 2+ years of automotive technician experience Valid Driver License Own a basic set of automotive tools or participate in tool purchase program. Ability to work with hands overhead, stand for long periods and lift 50 lbs. Guest and team focused mindset Have and maintain an Automotive Technician State Inspector's license, where applicable. Preferred Qualifications ASE automotive certification in at least one of A1-A8 Automotive Technician State Inspector License Automotive technical school certificate/degree Additional Information Benefits Performance based incentives Paid vacation and holidays for Full-Time Teammates Reimbursement for ASE Certifications Reimbursement for State Inspection Licenses, where applicable 401k eligibility immediately upon hire Direct Deposit Employee Discounts Healthcare, Vision, and Dental for Full time teammates Employee Access Perks Career Advancement Opportunities Your next Destination! Growth Opportunity: At Monro we're committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

What You Will Do: The Automotive Service Technician functions as a moderate skill - level automotive technician who is able to perform diagnoses and repairs in all areas with proficiency and minimal supervision. The Automotive Service Technician - Customer Pay and Reconditioning will have progressive technical experience and may possess certifications from an accredited automotive credentialing body and maintain such certificates during the course of employment. This position requires the technician to service used car stock vehicle in preparation for sale, ensure proper functioning of main systems and safe vehicle operation. The technician shall be able to communicate and recommend the repairs needed while maintaining the required gross profit margin at time of sale. Technician will also perform repairs and maintenance to customer pay vehicle. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. Rate of Pay: $20.00 to $30.00 hourly depending on experience. Job Duties: Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and company standards. Diagnoses cause of any malfunction and performs repair. Communicates with service advisor to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines assigned vehicle to determine if further safety or service work is required or recommended. Communicates with service advisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair order. Road tests vehicles when required to ensure proper repair of vehicle. Participates inemployer-sponsored training programs, schools and events. Keeps abreast of employer and/or manufacturer technical bulletins as required. Supervises work of any apprentice technicians as assigned. Reports machinery defects or malfunctions to supervisor. Ensures that customers' cars are kept clean. Notifies service advisor immediately of anything that has happened to change the appearance or condition of the vehicle. Keeps shop area neat and clean. Maintains and is accountable for all company-owned tools and manuals. Returns them to the proper place and in the same condition as they were received. Understands, keeps abreast of and complies with federal, state and local regulations, such as hazardous waste disposal, OSHA Right-to-Know etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management. Other tasks as assigned. Education, Certificates and Licenses and Experience: Automotive technician certification(s) from the National Institute for Automotive Service Excellence (ASE) or similar accredited credentialing body preferred. 5 years of related progressive technical experience required (or combination of education and experience). Used car reconditioning experience preferred. Dealership experience preferred. Valid driver's license. Required Skills/Abilities: Moderate knowledge of all aspects of vehicle repair. Proficient mechanical repair skills. Analytical and problem-solving skills. Ability to visually diagnose mechanical issues. Proficient with computer diagnostic equipment and software. Ability to read service and repair manuals. Ability to perform repairs in a timely fashion. Ability to read work orders. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to apply concepts of basic algebra and geometry. Ability to effectively present and communicate information. Driving history that meets company requirements to be covered by general liability insurance coverage. Benefits: Health Insurance Access to supplemental coverages Paid Time Off 40 hour work week wirh opportunities for overtime Paid Holiday (salary and hourly only)

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Competitive salary Dental insurance Free uniforms Health insurance Paid time off Vision insurance Job Title: Field Service Mechanic Diesel Trucks & Heavy Equipment (Statewide Travel) Company: Red Lightning Field Service, LLC Location: Florida (Travel Required) Job Type: Full-time Pay: $35 $45 per hour (based on experience) + Overtime + Benefits About Us Red Lightning Field Service, LLC is one of Floridas fastest-growing service providers for diesel trucks and heavy equipment. We specialize in on-site diagnostics, repairs, and maintenance, helping our clients keep their equipment running at peak performance. Job Summary We are hiring a Field Service Mechanic to diagnose and repair diesel trucks and heavy equipment in the field across the state of Florida. This role is ideal for a self-starter who enjoys working independently, traveling, and solving tough mechanical challenges. Responsibilities Diagnose and repair diesel engines, hydraulics, and electrical systems on-site Perform scheduled maintenance and emergency repairs Travel daily to customer locations (some overnight stays required) Maintain service vehicle, tools, and inventory Complete work orders and communicate job status with dispatch Qualifications 5+ years of diesel and heavy equipment repair experience Strong knowledge of engine diagnostics, hydraulics, and electrical systems Valid drivers license with a clean driving record (CDL a plus) Must be able to work independently and manage time effectively Basic computer or tablet skills for service logs Benefits $35$45/hour DOE + OT pay Company-provided service truck, fuel card & specialty tools Medical, dental, vision insurance 401(k) with company match Paid time off & holidays Growth opportunities in a rapidly expanding company Schedule Monday to Friday Occasional weekends/on-call Travel required (statewide) Apply now on Indeed or send your resume to ********************************* Questions? Call us at *************

Job Description Mechanic About PURIS: PURIS operates across North America as the largest independent trenchless rehabilitation provider with 900+ employees dedicated to building lasting infrastructure with smart, sustainable resource management. The PURIS Family of Companies provide trenchless renewal solutions in the water, wastewater, and stormwater markets. Our environmentally friendly solutions work within the existing infrastructure to save time, minimize environmental impact, and cause fewer community disruptions. With an unrivaled toolbox of technologies, PURIS has the RIGHT solution for each project. Job Summary: The Mechanic will complete all repairs, preventative maintenance, programmed repairs and facility repairs to be in compliance with equipment/ facility reliability and standards. Maintenance mechanic will report any foreseeable problems to the Shop Manager. Essential Job Accountabilities: General mechanical knowledge including pumps, hydraulics and electrical Basic welding knowledge and experience Good assembly skills Experience with preventative maintenance programs Basic intermediate computer skills Experience with work order execution Has own basic tools Experience with safety training Facility repair experience. Keep up with training and process needs, requirements. Problem solve and root case diagnosis Communicates well and works in clean orderly manner Diagnose and manage employees projects Schedule repairs and maintenance of equipment Other duties as assigned Work afternoon shift and overtime when available. Education: High school diploma or equivalent Trade education in industrial mechanics (preferred) Additional Requirements/Skills: Must have a minimum of 3 years of experience with industrial mechanical repairs. Heavy truck repair experience. Must have Preventative Maintenance system experience. Possess own basic hand tools. Must be able to work in closed and open environments. Class C drivers license Experience with boiler/steam truck maintenance (preferred) Experience with vac truck maintenance (preferred) Benefits: Comprehensive and competitive benefits package that includes medical/Rx, dental, vision, critical illness and accident insurance, and short-term disability. Several 100% company-paid benefits including: Life Insurance Long-term disability Employee assistance program Bonus program 401(k) savings plan with company match Generous PTO 10 paid holidays Tuition reimbursement Career advancement opportunities PURIS and our Family of Companies are an Equal Opportunity/Affirmative Action Employer. All qualified applicants are encouraged to apply without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, protected veteran status or status as an individual with a disability.

Mechanic About PURIS: PURIS operates across North America as the largest independent trenchless rehabilitation provider with 900+ employees dedicated to building lasting infrastructure with smart, sustainable resource management. The PURIS Family of Companies provide trenchless renewal solutions in the water, wastewater, and stormwater markets. Our environmentally friendly solutions work within the existing infrastructure to save time, minimize environmental impact, and cause fewer community disruptions. With an unrivaled toolbox of technologies, PURIS has the RIGHT solution for each project. Job Summary: The Mechanic will complete all repairs, preventative maintenance, programmed repairs and facility repairs to be in compliance with equipment/ facility reliability and standards. Maintenance mechanic will report any foreseeable problems to the Shop Manager. Essential Job Accountabilities: General mechanical knowledge including pumps, hydraulics and electrical Basic welding knowledge and experience Good assembly skills Experience with preventative maintenance programs Basic intermediate computer skills Experience with work order execution Has own basic tools Experience with safety training Facility repair experience. Keep up with training and process needs, requirements. Problem solve and root case diagnosis Communicates well and works in clean orderly manner Diagnose and manage employees projects Schedule repairs and maintenance of equipment Other duties as assigned Work afternoon shift and overtime when available. Education: High school diploma or equivalent Trade education in industrial mechanics (preferred) Additional Requirements/Skills: Must have a minimum of 3 years of experience with industrial mechanical repairs. Heavy truck repair experience. Must have Preventative Maintenance system experience. Possess own basic hand tools. Must be able to work in closed and open environments. Class C drivers license Experience with boiler/steam truck maintenance (preferred) Experience with vac truck maintenance (preferred) Benefits: Comprehensive and competitive benefits package that includes medical/Rx, dental, vision, critical illness and accident insurance, and short-term disability. Several 100% company-paid benefits including: Life Insurance Long-term disability Employee assistance program Bonus program 401(k) savings plan with company match Generous PTO 10 paid holidays Tuition reimbursement Career advancement opportunities PURIS and our Family of Companies are an Equal Opportunity/Affirmative Action Employer. All qualified applicants are encouraged to apply without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, protected veteran status or status as an individual with a disability.

Full-time Description WHO WE ARE We are so excited that you are considering joining our team at Helicon, Florida's Premier Foundation Repair Company, Since 2004, located in Tampa, Florida (**************************** At Helicon, we deliver a superior level of transparency, communication, and service through our unique brand of property restoration services. We offer a relentless dedication to personalized planning, understanding, and problem-solving through the highest quality work, industry-leading expertise, and complete clarity - all backed by a promise to exceed our client's expectations every step of the way. We believe in providing our clients with confidence - in our services and their decision. WHAT YOU'LL DO As our Mechanic, you will be responsible for diagnosing, repairing, and maintaining small engines, pickup trucks, trailers, and heavy equipment. Career advancement is available. To succeed, you will need a flexible skill set, including the ability to communicate, work hard, and collaborate. DAY-TO-DAY RESPONSIBILITIES: Perform work including physical labor, using hand tools, and lifting materials; Understand project schedules, assume additional responsibilities, and work extended hours as needed to meet project deadlines; Diagnose, repair, and maintain small engines, including water pumps and generators; Perform diagnostic and repair work on pickup trucks and trailers, including brakes, lights, oil changes, and other essential maintenance tasks; Work cohesively with team members to exceed client expectations; Maintain equipment daily to ensure it functions properly and safely; Maintain quality control, and site safety; Research and determine methods and procedures on new or unique assignments in compliance with local, state, and federal regulatory requirements; Maintain internal employee communication and engagement through feedback programs, surveys, and one on one meetings; Align the work with Helicon's culture and strategic goals - Stay True, Communicate Clearly, Forecast Needs + Outperform; and Work with the team on mutually agreed-upon KPIs. Requirements WHAT WE ARE LOOKING FOR MUST HAVES: High School diploma, GED or equivalent; 1+ years of experience in mechanical repair, with a focus on small engines, pickup trucks, and trailers; Heavy equipment mechanical experience is a plus; Reliable transportation, valid FL driver's license, and a clean driving record; Familiarity with construction project team management and delegation; The ability to be coached and mentored and collaborate within a team environment; Possess excellent project management skills with the proven ability to drive ideas into action; Enjoy thinking strategically to align perspectives, voices, and opinions; Offer excellent communication and interpersonal skills with the ability to build rapport and meaningful relationships; Knowledge of mechanical and repair processes, codes, and standards; and Well-organized and able to meet deadlines. YOU WILL LOVE WORKING FOR HELICON IF YOU: Thrive working in fast-paced, high-growth environments; and Get excited about building something from the ground up. WORK SCHEDULE: Varies; will require flexible schedule, including weekends and holidays; Local day travel is required; and Position requires occasional overtime. ENVIRONMENTAL CONDITIONS: Work near or with moving mechanical parts - Frequently; Outdoor weather conditions - Occasionally; and Moderate-Loud Noise. PHYSICAL DEMANDS: Must be able to lift/carry/push or pull - up to 50 pounds; Must be able to hear equipment operating, alarms sounding, traffic, telephones; and Ability to see clearly at 20 inches/50 centimeters or less and at 20 feet/6 meters or more. Salary Description $20-24/hr

Job Description Join our team at Unite Contracting Solutions in Tampa, FL as a Mechanic! Are you a skilled Mechanic who is looking for a rewarding career with a company that values teamwork, innovation, and excellence? If so, we want you to join our team! As a Mechanic at Unite Contracting Solutions, you will play a crucial role in helping our hydraulic marine mechanics ensure that the equipment is well-maintained and in optimal working condition. Your expertise and attention to detail will help us deliver high-quality service to our marine clients and uphold our reputation as a leader in the industry. What you'll do as a Mechanic: Perform routine maintenance on hydraulic pumps, cylinders, and hoses, and various equipment to ensure they are operating efficiently Diagnose and repair marine mechanical issues promptly Inspect and test equipment to identify potential problems Keep accurate records of maintenance and repairs performed Collaborate with team members to troubleshoot complex problems and find solutions What we're looking for in a Mechanic: Proven experience as a Mechanic Strong knowledge of mechanical systems and troubleshooting techniques Attention to detail and precision in your work Ability to work independently and as part of a team Excellent communication and interpersonal skills Why work with us: At Unite Contracting Solutions, we are committed to providing our employees with the support and resources they need to succeed. As a Mechanic with us, you will have the opportunity to work with cutting-edge equipment and technologies, receive ongoing training and development, and be part of a dynamic team that is dedicated to excellence. We offer competitive pay, benefits, and a positive work environment where your contributions are recognized and valued. If you are a skilled Mechanic who is looking for a challenging and rewarding career, we want to hear from you! Please apply now to join our team at Unite Contracting Solutions in Tampa, FL. About Us: Unite Contracting Solutions is a leading contracting company based in Tampa, FL. With over 20 years of experience in the industry, we specialize in providing high-quality services to our clients in both the public and private sectors. Our team of professionals is dedicated to delivering innovative solutions, exceptional quality, and superior customer service on every project we undertake. At Unite Contracting Solutions, we are committed to excellence in everything we do, and we are always looking for talented individuals to join our team and help us continue our tradition of success. #hc192652

At FlyUSA, we're redefining the private aviation experience from start to finish. As leaders in the industry, we provide comprehensive solutions that meet the unique needs of our clientele. We're not just about flying; we're about delivering unparalleled service and creating memorable journeys. We are currently hiring an A&P Maintenance Technician to ensure the reliability and safety of our corporate jet fleet. This role involves performing maintenance and inspections, managing administrative tasks, and collaborating with external providers, all while adhering to industry regulations. Flexibility for after-hours and weekend work is essential, and the ability to work independently and troubleshoot effectively will be crucial for success. Location: Tampa, Florida (KTPA) Schedule: 4/10s Key Responsibilities: Perform maintenance and inspections on a range of corporate/business jets. Manage administrative tasks, including maintenance tracking and coordination with outside maintenance providers. Ensure all work complies with Federal Aviation Regulations and company standards. Maintain an efficient, professional work environment. Ability to work off hours and weekends. Minimum Qualifications: Current FAA Airframe and Powerplant certificate from an FAA-approved program. Knowledge of FAR 135 regulations. Proficiency in aircraft maintenance tracking systems (CMP, CAMP). Experience in MS Word and Excel. Must have maintenance experience specifically on Cessna 500 series, PC-12, Falcon 2000s and familiarity with other private jets. Preferred Qualifications: Inspection Authorization is desired. Previous AOG tech experience. Ability to work unsupervised. Strong troubleshooting skills. At FlyUSA, we invest in our people. We build careers, not just fill seats. Here's how we support our team: Health & Wellness Aetna medical plans with multiple coverage options Dental and vision coverage through MetLife Access to Teladoc and virtual care resources Over-the-counter health product allowance at CVS Employee assistance and wellness resources Financial Support & Security Employer contribution toward medical premiums Company-provided basic life insurance Optional supplemental life, accident, critical illness, and hospital indemnity plans Health Savings Account and Flexible Spending Account options 401(k) with company match (via Slavic 401k) Time & Balance Paid Time Off Sick time provided annually Paid holidays for full-time employees Your Growth & Experience Structured onboarding and support from leadership A culture built on professionalism, teamwork, and clear communication Opportunities to grow internally as we expand fleet and operations Equal Opportunity Employer: FlyUSA Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Join our team at Unite Contracting Solutions in Tampa, FL as a Mechanic! Are you a skilled Mechanic who is looking for a rewarding career with a company that values teamwork, innovation, and excellence? If so, we want you to join our team! As a Mechanic at Unite Contracting Solutions, you will play a crucial role in helping our hydraulic marine mechanics ensure that the equipment is well-maintained and in optimal working condition. Your expertise and attention to detail will help us deliver high-quality service to our marine clients and uphold our reputation as a leader in the industry. What you'll do as a Mechanic: Perform routine maintenance on hydraulic pumps, cylinders, and hoses, and various equipment to ensure they are operating efficiently Diagnose and repair marine mechanical issues promptly Inspect and test equipment to identify potential problems Keep accurate records of maintenance and repairs performed Collaborate with team members to troubleshoot complex problems and find solutions What we're looking for in a Mechanic: Proven experience as a Mechanic Strong knowledge of mechanical systems and troubleshooting techniques Attention to detail and precision in your work Ability to work independently and as part of a team Excellent communication and interpersonal skills Why work with us: At Unite Contracting Solutions, we are committed to providing our employees with the support and resources they need to succeed. As a Mechanic with us, you will have the opportunity to work with cutting-edge equipment and technologies, receive ongoing training and development, and be part of a dynamic team that is dedicated to excellence. We offer competitive pay, benefits, and a positive work environment where your contributions are recognized and valued. If you are a skilled Mechanic who is looking for a challenging and rewarding career, we want to hear from you! Please apply now to join our team at Unite Contracting Solutions in Tampa, FL. About Us: Unite Contracting Solutions is a leading contracting company based in Tampa, FL. With over 20 years of experience in the industry, we specialize in providing high-quality services to our clients in both the public and private sectors. Our team of professionals is dedicated to delivering innovative solutions, exceptional quality, and superior customer service on every project we undertake. At Unite Contracting Solutions, we are committed to excellence in everything we do, and we are always looking for talented individuals to join our team and help us continue our tradition of success.

Job DescriptionAt FlyUSA, we're redefining the private aviation experience from start to finish. As leaders in the industry, we provide comprehensive solutions that meet the unique needs of our clientele. We're not just about flying; we're about delivering unparalleled service and creating memorable journeys. We are currently hiring an A&P Maintenance Technician to ensure the reliability and safety of our corporate jet fleet. This role involves performing maintenance and inspections, managing administrative tasks, and collaborating with external providers, all while adhering to industry regulations. Flexibility for after-hours and weekend work is essential, and the ability to work independently and troubleshoot effectively will be crucial for success. Location: Tampa, Florida (KTPA) Schedule: 4/10s Key Responsibilities: Perform maintenance and inspections on a range of corporate/business jets. Manage administrative tasks, including maintenance tracking and coordination with outside maintenance providers. Ensure all work complies with Federal Aviation Regulations and company standards. Maintain an efficient, professional work environment. Ability to work off hours and weekends. Minimum Qualifications: Current FAA Airframe and Powerplant certificate from an FAA-approved program. Knowledge of FAR 135 regulations. Proficiency in aircraft maintenance tracking systems (CMP, CAMP). Experience in MS Word and Excel. Must have maintenance experience specifically on Cessna 500 series, PC-12, Falcon 2000s and familiarity with other private jets. Preferred Qualifications: Inspection Authorization is desired. Previous AOG tech experience. Ability to work unsupervised. Strong troubleshooting skills. At FlyUSA, we invest in our people. We build careers, not just fill seats. Here's how we support our team: Health & Wellness Aetna medical plans with multiple coverage options Dental and vision coverage through MetLife Access to Teladoc and virtual care resources Over-the-counter health product allowance at CVS Employee assistance and wellness resources Financial Support & Security Employer contribution toward medical premiums Company-provided basic life insurance Optional supplemental life, accident, critical illness, and hospital indemnity plans Health Savings Account and Flexible Spending Account options 401(k) with company match (via Slavic 401k) Time & Balance Paid Time Off Sick time provided annually Paid holidays for full-time employees Your Growth & Experience Structured onboarding and support from leadership A culture built on professionalism, teamwork, and clear communication Opportunities to grow internally as we expand fleet and operations Equal Opportunity Employer: FlyUSA Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Powered by JazzHR mx KmDrenre

Experienced A&P Mechanic -Various Shifts - Tampa, FL(Job Number: 337506) Textron Aviation has been inspiring the journey of flight for nine decades through the iconic and beloved Cessna and Beechcraft brands. We are passionate advocates of aviation, empowering people with the freedom of flight. As you join our legacy as a global leader in private aviation, you'll have opportunities to try new fields, expand your skills and knowledge, stretch your abilities, and build your career. We provide a competitive and extensive total rewards package that includes pay and innovative benefits to support you and your family members - now and in the future, beginning day one. Your success is our success.Description We are hiring immediately for a full time A&P or AMT mechanic. This role is critical to our mission, so we are offering up to a $15,000 Sign On Bonus. What you will be doing as an A & P Mechanic: You can expect to conduct thorough inspections, maintenance, and repairs on Cessna and Beechcraft aircraft models. Your responsibilities may include: Performs a variety of mechanical duties involving diagnosis of malfunctions and required disassembly, rework, repair, replacement, reassembly, or adjustment of various aircraft systems to prepare aircraft for flight and delivery to customer. Performs turbine engine troubleshooting, inspection, repair and engine run-ups. What you need to be successful: High school education or GED required A&P License, or partial license with the ability to obtain full license within 6 months. . Experience as an A & P Mechanic or mechanical repair of vehicles OR AMT (Aircraft Maintenance Technician) with varied jet, turboprop, piston, modification, aircraft/flight maintenance Why join Us? Your success is our success. We provide a competitive and extensive total rewards package that includes pay and innovative benefits to help you and your family members - now and in the future, beginning day one. 401K company match + additional annual contribution equal to 4% of eligible compensation Education assistance for undergraduate, graduate, and certificate programs, compensated at the start of the semester Flight training bonus program for earning pilot certifications Fertility and adoption assistance Free financial consultations and guidance And so much more At Textron Aviation, base pay is only one of the parts of our Total Rewards package and is determined within a range. This provides you the opportunities to grow and develop within your role, and depends on your experience, qualifications, and location. Qualifications Our workforce is made up of individuals throughout the world with a wide range of backgrounds, interests, and passions. Our unique perspectives lead us to be a world-class workforce, helping us develop legendary products. Because we recognize that our differences make us stronger, and studies have shown that some may be less likely to apply unless they match the job description exactly, we welcome you to apply to this role if it meets your career goals. Whether you're in the military community, a recent graduate, or looking for a career change, you could be our next great fit! This role is eligible for up to a $15,000 (pre-tax) sign-on bonus based on level of experience. Terms & conditions apply. The Company reserves the right to amend or suspend this program at any time. EEO StatementTextron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law. Preference given to Veterans of the U. S. Armed Forces. Recruiting Company: Textron AviationPrimary Location: US-Florida-TampaSchedule: Full-time Job Level: Individual ContributorShift: Second ShiftJob Posting: 11/04/2025, 8:50:00 PM

Job DescriptionBenefits/Perks Careers Advancement Opportunities Flexible Scheduling Competitive Compensation Training We are looking for a skilled Mechanic to join our busy repair shop. As an Auto Mechanic, you will assist our customers by diagnosing and repairing issues with vehicles performance and function. As an Auto Mechanic, you must have an in-depth understanding of all vehicle systems and components. You will also be responsible for maintaining repair shop equipment, preparing cost estimates, and maintaining a welcoming environment. The ideal candidate is skilled in communicating with customers, able to explain vehicle issues clearly and concisely and provide valuable advice. Responsibilities Diagnose and repair vehicles coming into the shop Carry out routine vehicle maintenance tasks such as tire rotations, oil changes, and brake pad replacements Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes Create repair estimates and timelines and convey information to customers in an easy-to-understand manner Maintain accurate repair shop records and paperwork Ensure a high level of customer satisfaction and repeat business Qualifications High school diploma or GED is required Associate degree or completion of an automotive service technician training program is preferred Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred Strong customer service and communication skills are required

Moretrench Industrial, is a leading civil, earthwork, and industrial contractor with offices in Riverview, FL. Moretrench routinely develops innovative, practical, and cost-effective solutions to challenging civil problems for its customers. As the leader in Industrial construction, we are constantly looking to expand our team and find personal that are willing to grow within our company. Moretrench is actively searching for a qualified Heavy Equipment Mechanic to join our successful construction team. Moretrench is one of the largest Industrial construction companies in Florida, offering competitive wages and opportunities for growth. Responsibilities Applicants must have documentation of two or more years of experience in truck, trailer, and heavy diesel equipment repair and maintenance. Applicant must be a high school graduate or show equivalent training, be able to efficiently perform electrical and hydraulic diagnostics, and pass a DOT pre-employment drug screen. Applicant must be a self-motivated individual and always demonstrate significant attention-to-detail. Basic computer skills to perform service reporting are desirable, however not required. Applicant must also possess all required Class I Mechanic hand tools. More experienced applicants will have experience with heavy equipment (Cat, Komatsu, etc.) loaders, excavators, tracked equipment, heavy equipment generally up to 60 ton. The safe operation of basic heavy equipment including forklifts, wheeled front end loaders, and excavators is also a plus, along with holding a valid CDL license. The available position is shop based, but 80+% of the repair is done in the field, on the job. Most job sites are within 60 miles of the office, with occasional sites out of town. The Mechanic reports to the Equipment Manager and/or onsite project Superintendent. Moretrench provides numerous internal and external training classes and encourages obtaining certifications related to quality, knowledge, and safety. Full time employees are eligible to receive benefits as well as participate in the company 401K program. Qualifications Qualified candidates must have or be: Capable of working safely, even when alone. Hands-on mechanic experience Minimum 2 years of experience in Heavy Equipment Repairs Diagnosis and troubleshooting Strong in Electrical and hydraulic systems Electric and hydraulic schematic reading and navigation Pilot system circuits E-Stop systems Machine maintenance Operating controls and functions Ability to work in a team environment with interpersonal communication skills Ability to perform physical labor and other strenuous physical tasks; to include frequent bending, kneeling and lifting and carrying up to 50 lbs Comfortable working outdoors in a high-stress environment with extreme weather fluctuations Ability to work in confined and cluttered spaces Capable of climbing and keeping balance on uneven areas Prior OSHA, First Aid, and/or Safety Training preferred Specific experience working on equipment typically found in civil, heavy, construction is a plus Additional Information Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay Moretrench Industrial is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.