Mechanic jobs in New Brunswick, NJ - 1,011 jobs

Academy Bus is seeking a full-time Diesel Mechanic Foreman for our new Perth Amboy, NJ location. $2500 Sign On Bonus. Every Friday is Pay Day. Pay rate is $35.00-$44.00 per hour. Pay based on candidate experience level. Shift is 5:00am-6:00pm. Responsibilities: Train and supervise mechanics and maintenance staff Repair, troubleshooting and diagnosis of modern motor coach bus engines and transmissions Reconditioning, preventative and routine maintenance Inspections and road tests Warranty and repair documentation Diagnosis, inspection, installation, disassembly and cleaning of components such as: Diesel engines, electronic systems/motors/controls, drive line components, tires, bearings, brake systems, seals, radiators, water pumps, coolant hoses, alternators, regulators, steering components, oil/air filters, door assemblies, controls, belts, pneumatic valves, cables, and linkages, radiators, heating, air conditioning, alternators, generators, voltage regulators, suspensions, seating, steering, and glass. Respond to road calls General welding/fabrication Requirements: 7+ years of diesel engine maintenance Must have supervisory experience Minimum personal tool value $5000 Proven ability to use hands tools, power tools, hydraulic jacks, pullers, VOA instruments, reamers, vacuum and compression pumps, welding equipment, and testing instruments Proficient in the use of diagnostic devices such as: DDEC readers, ATEC readers, SmarTire, schematics, AIC (Freon) recovery and charging equipment Valid driver's license Basic computer skills Ability to pass pre-employment background check and drug screen CDL License with Passenger and Airbrake endorsement is a plus but not required, willingness to obtain a CDL License is also desirable Health Insurance and Benefits Offered Include: Medical, Dental, Vision, Prescription, and Life insurance Supplemental coverages 401K plan Paid time off Paid holidays Academy is EEO. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Our client is establishing a state-of-the-art pharmaceutical manufacturing facility in Branchburg, New Jersey, dedicated to producing high-quality sterile injectable IV bag specialty products. They are seeking a skilled, safety-focused Facility Mechanic to support the installation, operation, and maintenance of utility and facility equipment for their new sterile IV bag manufacturing operation. Key Responsibilities: Maintain and repair site utilities and facility systems (HVAC for cleanrooms, clean utilities, boilers, chillers, air/vacuum, effluent treatment) to ensure reliable, compliant operation. Support installation, setup, calibration and qualification of new utility and facility equipment, and help define maintenance plans. Perform routine rounds, inspections and troubleshooting, documenting all work accurately in logs, work orders and the CMMS. Work safely in classified cleanroom areas, following gowning, contamination control, lockout/tagout and other EHS procedures. Partner with Engineering, Manufacturing and Quality on investigations, deviations and continuous improvement, and support plant startup and production needs as required.

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Full Time Lexus of Brookyln, Brooklyn, NY, US 4 days ago Requisition ID: 2645 Salary Range: $18.00 To $30.00 Hourly Job Description BRAM Auto Group is one of the largest family-owned businesses in the Tri-State area serving customers in New York and New Jersey for over 50 years. BRAM is a premier automotive management group - we own and operate 13 innovative Dealership Locations representing Lexus, Honda, Toyota, Cadillac, INEOS Grenadier, Genesis and Hyundai Brands. BRAM Auto Group has built a strong company reputation as a workplace that values innovation, upholds superior service, and rewards hard work and success. We offer a competitive total compensation package that includes Medical, Dental, Vision, Life, 401K, Paid Vacation & Holidays, and more! We are actively recruiting for an experienced and skilled Automotive Technician who is looking to elevate their career! This opening is for our Lexus of Brooklyn Dealership. The Union benefits include comprehensive Medical, Vision, Dental and Life Insurance plans. Requirements: Diagnoses cause of malfunctions and perform work specified on the repair order with efficiency and in accordance with dealership. The Automotive Technician is responsible for vehicle maintenance and proper lubrication of a car's suspension system and other moving parts. Examines the vehicle to determine if additional safety or service work is required and notifies service advisor. Responsible for documenting all work performed. Road-tests vehicles when required. Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment. Ensures cleanliness of all customers vehicles. Keeps shop area neat, clean, and be able to account for all dealership-owned tools. Understands and follows federal, state and local regulations, such as those governing the disposal of hazardous wastes. Complies with factory and state requirements for technical certifications. Attends factory-sponsored training classes as required. MUST HAVE NEW YORK STATE INSPECTION LICENSE. Here's what to expect from us: Unionized Benefits! Weekends off! The opportunity to earn top pay, with an incredible productivity bonus - paid weekly. To work in a clean, modern, temperature controlled environment. Factory sponsored training programs. A Team you can count on and professionals to grow with. Job Type: Full-time Schedule: 8 hour shift Ability to commute/relocate: Brooklyn, NY 11220: Reliably commute (Required) #J-18808-Ljbffr

Freelance handyman Independent online sorted gigs for, plumbers, electricians and motion editing, auto mechanic services, lawn and landscaping services. Need a smart phone or lap top or desk top computer to connect and perform work. We provide a platform and get you a gig online, you contact prospective client, agree on a price for described work, you issue an invoice on the platform to the client, once paid by client you will receive a success notice from the platform and you commence work for the client. The platform keeps an agreed percentage fee from payment and release the client payment you within 24 - 72 hours of the completed services and case closed.

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel and gasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) - Preferred NJ State Inspection License - Preferred Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. Pay Range: For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $39.89/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

Jersey Elevator is part of American Elevator Group (AEG), the largest independent elevator service company in North America, consisting of a collection of well-established elevator service companies operating throughout the United States. Backed by Arcline Investment Management, AEG has a significant footprint in the elevator industry and is rapidly growing. As an Elevator Mechanic you will be responsible for the construction of elevators and other lifting equipment. The Elevator Mechanic will be responsible for ensuring the safety and reliability of the equipment, as well as troubleshooting and resolving any mechanical issues that may arise. This involves skilled mechanical work and intricate control circuits. Responsibilities: * Responsible for inspecting elevators of all types and makes, determining the cause of faulty operation, making repairs and adjustments, and troubleshooting problems. * Ability to diagnose deficiency of equipment and make recommendations for major changes or requirements. * Install, maintain, and repair elevators, escalators, and other lifting equipment * Knowledge and ability to analyze and repair failures, especially in emergency situations. * Troubleshoot and diagnose mechanical issues. * Repair or replace defective parts. * Conduct regular inspections to ensure equipment is functioning properly. * Respond to emergency repair calls in a timely manner. * Maintain accurate records of all repairs and maintenance performed. * Provide excellent customer service to building owners and occupants. * Performs other duties as assigned.

Alternate Concepts, Inc. (ACI) and Herzog Transit Services, Inc. (HTSI), collectively the ACI/Herzog Joint Venture, along with our key subcontractors are seeking applicants for the Hudson Bergen Light Rail operation located in Hudson County, New Jersey. ACI was founded in 1989 with their corporate office located in Boston, MA and Herzog founded in 1969 with corporate offices located in St. Joseph, MO and Fort Worth, TX. Combined our companies provide FRA/FTA compliant transportation, equipment maintenance, dispatching, right-of-way maintenance, facility maintenance and dispatching services for 20 distinct client properties. In addition to the Joint Venture being the upcoming operator/maintainer of the Hudson Bergen Light Rail, we currently jointly operate the Tren Urbano heavy rail service in San Juan, Puerto Rico and the CTDOT's Hartford intercity service in Connecticut. ACI/Herzog Joint Venture, along with our key subcontractors are currently seeking an Elevator Mechanic to join our team. The pay range for this postion is $34.00 - $45.00 per hour. Duties and Responsibilities: *This is a non-exhaustive overview of the job duties for this position. Responding to mechanical failures and system malfunctions. Installing and testing electrical systems. Servicing and maintaining machine parts. Repairing or replacing system parts. Oiling and greasing moving parts. Carrying out safety checks. Maintaining stock and ordering supplies. Maintaining a clean working area. Other duties as assigned. Qualifications: High school diploma or GED. Relevant mechanical certification. Previous work experience as an elevator mechanic. Advanced knowledge of elevator systems, mechanical walkways, and escalators. Ability to read and interpret blueprints. Ability to troubleshoot mechanical malfunctions. Physically fit and able to lift heavy objects. Ability to travel and work after hours when required. Ability to work independently. Pre-Employment Requirements: Subject to pre-employment background check and motor vehicle report review. Subject to pre-employment physical, medical evaluation, and drug screen due to the safety sensitive nature of this position.

MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck , Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: Union Pension Plan Medical, Dental, Vision benefits available Vacation Time Retirement Plan Opportunities Overtime Opportunities Competitive wages Supplemental Pay (bonus pay, commission pay, signing bonus) Referral bonus program Compensation: $18 - $32 / hour Primary Responsibilities: Job will require IC and Electric truck repairs Complete scheduled PM and repair assignments within the time frame allotted Track van inventory to meet PM schedule Perform routine forklift maintenance Use diagnostic tools to test forklift components Perform quality inspections Skills Required: The ability to work in all types of weather conditions The ability to stand and walk for long periods of time Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job Employee must be able to communicate effectively with management, customers, and other employees Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks Employee must be able to analyze information and write a diagnosis on work orders The ability to decipher different colors Must be able to work individually and as a team Qualifications: Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs Valid Driver's license with a good driving record Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Valid Driver's license with a good driving record Ability to lift 50 lbs. Willingness to learn Ability to thrive in a fast-paced environment Schedule: Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Who We Are: St. John's Episcopal Hospital is the only hospital providing emergency and ambulatory care to the densely populated, culturally and economically diverse, and medically underserved populations of the Rockaways and Five Towns in southern Queens County and southwestern Nassau County, New York. Celebrating over 110 years of community care, the 257-bed facility provides people of all faiths with comprehensive preventive, diagnostic treatment and rehabilitative services, regardless of ability to pay. Come Grow With Us! Type: Full-Time (75 Hours Biweekly) Shift: Varies Hours: Varies Pay: $43.69 per hour Job Description: The HVAC Mechanc is responsible for installing, operating and maintaining air conditioning, refrigeration, heating, ventilation and humidifying systems including controls in accordance with approved blueprints or schematic drawings, structural layouts and design of components. Responsibilities: * Install, operate, and maintain air conditioning, refrigeration, heating, ventilation, and humidifying systems including controls in accordance with approved blueprints or schematic drawings, structural layouts, and design of components. * Assemble structural and functional components, such as motors, controls, switches, gauges, valves, pumps, compressors, etc. * Connect pipes to functional components and water or power systems. * Perform major and minor repairs on all air conditioning, refrigeration, heating, and ventilating systems in the hospital and auxiliary buildings. * Dismantle malfunctioning systems and tests components. * Replace or adjust defective or worn parts. * Operate and maintain low-pressure boilers, pumps, and all control plant equipment in accordance with code regulations. * Inspect equipment periodically to detect and repair leaks and other malfunctions. Requirements: * High School diploma or Equivalency required * EPA Universal CFC Certificate required * NYC Refrigeration License required * 4 years apprenticeship or equivalent on-job training * EPA 608 License preferred * Vocational School courses in refrigeration theory, pipefitting, and structural design preferred * 1 year experience in a comparable hospital position preferred * Experience with compressors, condenser units, metal working tools, welding equipment, gauges

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. ESSENTIAL DUTIES AND FUNCTIONS The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. Maintains Beech King Air B300 aircraft in support of aircrew missions. Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. Advises management of deficiencies affecting aircraft airworthiness. Maintains aircraft support equipment inventory. Performs inspections, and accomplishes refurbishment and phase maintenance. Prepares and maintains aircraft maintenance records and historical documents. Monitors/reviews deficiency reports for adverse trends. Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. Performs in-progress and follow-up inspections to ensure quality of work. Researches, orders, and receives aircraft parts. Prepares parts for turn-in to the supply system. Initiates material reports as required. Maintains hand tools and special tools in safe and serviceable condition. Adhere to company tool accountability procedures. Reports unserviceable tools and equipment to appropriate parties. Annotates equipment/tools inspection and condition documents. Checks serviceability, and maintains and operates powered and non-powered support equipment. Complies with established policies, procedures, and standards. Complies with all safety, bioenvironmental, security, and housekeeping standards. Operates special purpose and regular vehicles as required. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. Monitors bench stock items and assists with and/or performs inventory inspections. Maintains supply discipline in the work center at all times. Actively participates in the Safety Program. Ensures HAZMAT processes are followed. Performs aircraft movements and FOD prevention walks on the flight line. Completes maintenance documentation using required forms. Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. Performs aircraft, basic post-flight, and periodic/phase inspections. Operate and maintain GSE, flight line vehicles, and other support equipment as required. Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. Performs other job-related duties as assigned. Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures. EDUCATION and/or EXPERIENCE: High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. Experience shall be in a similar position within the last twelve (12) months. Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following are required: Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) Ability to retain information and make decisions according to standard policies and procedures Ability to determine work methods to accomplish assignments Working knowledge of applicable FAA Federal Aviation Regulations Ability to make proper entries in aircraft logs and records Obtain a DOJ Security Clearance as required Have and maintain a valid driver's license Must be a U.S. citizen PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays. Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. ESSENTIAL DUTIES AND FUNCTIONS The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. * Maintains Beech King Air B300 aircraft in support of aircrew missions. * Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. * Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. * Advises management of deficiencies affecting aircraft airworthiness. * Maintains aircraft support equipment inventory. * Performs inspections, and accomplishes refurbishment and phase maintenance. * Prepares and maintains aircraft maintenance records and historical documents. * Monitors/reviews deficiency reports for adverse trends. * Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. * Performs in-progress and follow-up inspections to ensure quality of work. * Researches, orders, and receives aircraft parts. * Prepares parts for turn-in to the supply system. Initiates material reports as required. * Maintains hand tools and special tools in safe and serviceable condition. * Adhere to company tool accountability procedures. * Reports unserviceable tools and equipment to appropriate parties. * Annotates equipment/tools inspection and condition documents. * Checks serviceability, and maintains and operates powered and non-powered support equipment. * Complies with established policies, procedures, and standards. * Complies with all safety, bioenvironmental, security, and housekeeping standards. * Operates special purpose and regular vehicles as required. * Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. * Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. * Monitors bench stock items and assists with and/or performs inventory inspections. * Maintains supply discipline in the work center at all times. * Actively participates in the Safety Program. * Ensures HAZMAT processes are followed. * Performs aircraft movements and FOD prevention walks on the flight line. * Completes maintenance documentation using required forms. * Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. * Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. * Performs aircraft, basic post-flight, and periodic/phase inspections. * Operate and maintain GSE, flight line vehicles, and other support equipment as required. * Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. * Performs other job-related duties as assigned. * Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures. EDUCATION and/or EXPERIENCE: * High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required * Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) * Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. * Experience shall be in a similar position within the last twelve (12) months. Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following are required: * Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) * Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) * Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs * Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake * Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals * Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) * Ability to retain information and make decisions according to standard policies and procedures * Ability to determine work methods to accomplish assignments * Working knowledge of applicable FAA Federal Aviation Regulations * Ability to make proper entries in aircraft logs and records * Obtain a DOJ Security Clearance as required * Have and maintain a valid driver's license * Must be a U.S. citizen PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Benefits include the following: * Healthcare coverage * Retirement plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays. * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. **ESSENTIAL DUTIES AND FUNCTIONS** The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. + Maintains Beech King Air B300 aircraft in support of aircrew missions. + Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. + Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. + Advises management of deficiencies affecting aircraft airworthiness. + Maintains aircraft support equipment inventory. + Performs inspections, and accomplishes refurbishment and phase maintenance. + Prepares and maintains aircraft maintenance records and historical documents. + Monitors/reviews deficiency reports for adverse trends. + Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. + Performs in-progress and follow-up inspections to ensure quality of work. + Researches, orders, and receives aircraft parts. + Prepares parts for turn-in to the supply system. Initiates material reports as required. + Maintains hand tools and special tools in safe and serviceable condition. + Adhere to company tool accountability procedures. + Reports unserviceable tools and equipment to appropriate parties. + Annotates equipment/tools inspection and condition documents. + Checks serviceability, and maintains and operates powered and non-powered support equipment. + Complies with established policies, procedures, and standards. + Complies with all safety, bioenvironmental, security, and housekeeping standards. + Operates special purpose and regular vehicles as required. + Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. + Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. + Monitors bench stock items and assists with and/or performs inventory inspections. + Maintains supply discipline in the work center at all times. + Actively participates in the Safety Program. + Ensures HAZMAT processes are followed. + Performs aircraft movements and FOD prevention walks on the flight line. + Completes maintenance documentation using required forms. + Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. + Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. + Performs aircraft, basic post-flight, and periodic/phase inspections. + Operate and maintain GSE, flight line vehicles, and other support equipment as required. + Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. + Performs other job-related duties as assigned. + **Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures.** **EDUCATION and/or EXPERIENCE:** + High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required + Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) + Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. + Experience shall be in a similar position within the last twelve (12) months. **Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS:** The following are required: + Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) + Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) + Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs + Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake + Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals + Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) + Ability to retain information and make decisions according to standard policies and procedures + Ability to determine work methods to accomplish assignments + Working knowledge of applicable FAA Federal Aviation Regulations + Ability to make proper entries in aircraft logs and records + Obtain a DOJ Security Clearance as required + Have and maintain a valid driver's license + Must be a U.S. citizen **PHYSICAL DEMANDS:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. **WORK ENVIRONMENT:** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. **Benefits include the following:** + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays. + Learning and Development resources + Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Fraza & Vitan Equipment is looking for an experienced Forklift Technician to repair heavy equipment. You'll service, diagnose, and maintain forklifts and material handling equipment-no two days are the same. Why you'll love it here: Pay range $21-$33 an hour, based on experience and qualifications Weekly pay Company vehicle provided No weekends Medical, dental, vision, & pension What you'll do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What you'll need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Get to know us: Fraza and Vitan Equipment is a full-service material handling business with over 300 skilled employees across Michigan and the East Coast. Our team uses innovative equipment and processes to push your business forward and increase efficiency. We're always on the lookout for talented individuals to join our team and grow their careers in a challenging but positive environment. Take the next step in your career-apply today!

Job DescriptionThe Packaging Mechanic will support oral solid dosage (OSD) packaging operations through the setup, adjustment, maintenance, and troubleshooting of automated and semi-automated equipment. This role ensures that packaging lines operate safely, efficiently, and in compliance with cGMP and FDA requirements. The ideal candidate will bring strong mechanical aptitude, prior experience with pharmaceutical packaging systems, and the ability to perform real-time troubleshooting to minimize downtime and maintain product quality. Responsibilities: Packaging Mechanic: Set up, operate, and adjust OSD packaging equipment such as unscramblers, fillers, cottoners, desiccant feeders, induction sealers, labelers, outserters, and case sealers. Perform changeovers for different products and configurations in accordance with approved setup sheets and SOPs. Troubleshoot mechanical issues and perform timely repairs to maintain line performance and reduce downtime. Conduct scheduled preventive maintenance and minor mechanical overhauls, documenting all activities in equipment logbooks. Ensure full compliance with Master Batch Records (MBRs), SOPs, safety requirements, and cGMP expectations at all times. Collaborate with Production, Quality Assurance, and Engineering teams to resolve deviations and equipment-related issues. We are looking for applicants with: Packaging Mechanic: High School Diploma or equivalent required; trade school or vocational training in mechanical, electrical, or industrial maintenance preferred. Minimum 3-5 years of experience as a Packaging Mechanic in a pharmaceutical, nutraceutical, or GMP-regulated environment. Demonstrated mechanical proficiency in operating, setting up, and troubleshooting OSD packaging lines. Experience with bottle, blister, or pouch packaging equipment strongly preferred. Strong understanding of cGMP, GDP, and FDA regulatory requirements for packaging operations. Ability to interpret equipment manuals, mechanical drawings, and setup documentation. Effective communication skills and the ability to work efficiently in a fast-paced, cross-functional environment. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $17.00 to $19.00 / hour Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Academy Bus is seeking a full-time Diesel Mechanic for our Hoboken, NJ location. $2500 Sign On Bonus. Earn $29.00-$34.00 per hour. Pay rate commensurate with candidate experience level. Shift: 2:00pm-10:00pm Responsibilities: Diesel Mechanic - Class B / Level 2 Repair, troubleshooting and diagnosis of modern tour buses Reconditioning, preventative and routine maintenance Inspections and road tests Warranty and repair documentation Diagnosis, inspection, installation, disassembly and cleaning of components such as: brakes, suspension, tires, bearings, seals, radiators, water pumps, coolant hoses, alternators, regulators, steering components, oil/air filters, door assemblies, controls, seats, belts, electric motors, pneumatic valves, cables, and linkages. Respond to road calls Basic welding/fabrication Assist A Level Mechanics with skilled work and train/supervise C Level Mechanics Requirements: Diesel Mechanic 4-7 years of diesel engine maintenance Must have own tools Proven ability to use hands tools, power tools, hydraulic jacks, welding equipment, and testing instruments Valid driver's license Basic computer skills CDL License with Passenger and Airbrake endorsement is a plus but not required, willingness to obtain a CDL License is also desirable. Health Insurance and Benefits Offered Include: Medical, Dental, Vision, Prescription, and Life insurance Supplemental coverages 401K plan Paid Time Off Paid Holidays Academy is EEO Diesel Mechanic, Bus Mechanic, Motorcoach Mechanic Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

A leading Auto Group is actively recruiting for an experienced Automotive Technician at their Brooklyn dealership. The role requires diagnosing malfunctions, performing vehicle maintenance, and complying with safety regulations. Union benefits include comprehensive health insurance, weekends off, and opportunities for training and productivity bonuses. Candidates must hold a New York State Inspection License, exhibit strong diagnostic skills, and be dedicated to delivering exceptional service in a clean work environment. #J-18808-Ljbffr

Jersey Elevator is part of American Elevator Group (AEG), the largest independent elevator service company in North America, consisting of a collection of well-established elevator service companies operating throughout the United States. Backed by Arcline Investment Management, AEG has a significant footprint in the elevator industry and is rapidly growing. Due to growth, we are looking for an experienced Maintenance Mechanic to work in the Aberdenn, NJ area to help us continue providing our customers with the best services possible. As an Elevator Mechanic you will be responsible for the maintenance of elevators and other lifting equipment. The Elevator Mechanic will be responsible for ensuring the safety and reliability of the equipment, as well as troubleshooting and resolving any mechanical issues that may arise. This involves skilled mechanical work and intricate control circuits. Responsibilities: * Responsible for inspecting elevators of all types and makes, determining the cause of faulty operation, making repairs and adjustments, and troubleshooting problems. * Ability to diagnose deficiency of equipment and make recommendations for major changes or requirements. * Install, maintain, and repair elevators, escalators, and other lifting equipment * Knowledge and ability to analyze and repair failures, especially in emergency situations. * Troubleshoot and diagnose mechanical issues. * Repair or replace defective parts. * Conduct regular inspections to ensure equipment is functioning properly. * Respond to emergency repair calls in a timely manner. * Maintain accurate records of all repairs and maintenance performed. * Provide excellent customer service to building owners and occupants. * Performs other duties as assigned.

Who We Are: St. John's Episcopal Hospital is the only hospital providing emergency and ambulatory care to the densely populated, culturally and economically diverse, and medically underserved populations of the Rockaways and Five Towns in southern Queens County and southwestern Nassau County, New York. Celebrating over 110 years of community care, the 257-bed facility provides people of all faiths with comprehensive preventive, diagnostic treatment and rehabilitative services, regardless of ability to pay. Come Grow With Us! Type: Full-Time (75 Hours Biweekly) Shift: Nights Hours: 10:00PM - 6:30AM Pay: $43.69 per hour Job Description: The HVAC Mechanc is responsible for installing, operating and maintaining air conditioning, refrigeration, heating, ventilation and humidifying systems including controls in accordance with approved blueprints or schematic drawings, structural layouts and design of components. Responsibilities: * Install, operate, and maintain air conditioning, refrigeration, heating, ventilation, and humidifying systems including controls in accordance with approved blueprints or schematic drawings, structural layouts, and design of components. * Assemble structural and functional components, such as motors, controls, switches, gauges, valves, pumps, compressors, etc. * Connect pipes to functional components and water or power systems. * Perform major and minor repairs on all air conditioning, refrigeration, heating, and ventilating systems in the hospital and auxiliary buildings. * Dismantle malfunctioning systems and tests components. * Replace or adjust defective or worn parts. * Operate and maintain low-pressure boilers, pumps, and all control plant equipment in accordance with code regulations. * Inspect equipment periodically to detect and repair leaks and other malfunctions. Requirements: * High School diploma or Equivalency required * EPA Universal CFC Certificate required * NYC Refrigeration License required * 4 years apprenticeship or equivalent on-job training * EPA 608 License preferred * Vocational School courses in refrigeration theory, pipefitting, and structural design preferred * 1 year experience in a comparable hospital position preferred * Experience with compressors, condenser units, metal working tools, welding equipment, gauges