Mechanic jobs in North Dakota - 522 jobs

Diesel Fleet Mechanic Technician III
Sysco 4.4
Mechanic job in Mayville, ND
Sign-On Bonus for New Hires: up to $12,500 Pay: up to $26.25-$40.10 per hour, based on experience 3rd Shift available: Sunday, Monday, Tuesday 6pm-6am (3x12 paid for 40) $2 Shift Differential Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided to include OEM training, Thermo King Training, EPA training Outstanding benefits: ********************* Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
$26.3-40.1 hourly 1d ago

Looking for a job?

Let Zippia find it for you.

Master Automotive Technician
Big Inc. Contracting
Mechanic job in Fargo, ND
Willmar, MN | $90,000-$120,000 | Full time, In Person Schedule: Monday-Friday 7:00 AM - 5:00 PM, Saturday 7:00 AM - 12:00 PM Company: Big Inc Relentlessly Delivering Excellence with Safety, Precision, and Integrity “If you are an Elite Level Technician that seems to be in a rut or dead end place. Its time to Win BIG and start hitting your goals!” ----------------------------------------------------------------------------------------------------- About Big Inc We're a proud FedEx Ground independent contractor operating under the trusted names Big Red, Big Green, Big Blue, and Kronus Logistics. Our mission: Relentlessly deliver excellence with safety, precision, and integrity. We're scaling toward $100 M in revenue through 58 contracts, powered by 650 elite professionals, and we're just getting started. At Big Inc, we don't just repair vehicles, we build systems of excellence that keep entire fleets moving safely, efficiently, and profitably. As one of the fastest-growing logistics and fleet operations in the Midwest, we're expanding our in-house maintenance division and looking for mechanics who take pride in doing things right, not just fast. If you're a technician who thrives on complex diagnostics, takes ownership of results, and wants to grow into leadership, this is where you belong. ------------------------------------------------------------------------------------------------------- Position Overview The Automotive Mechanic (Commercial Fleet Specialist) will perform diagnostic, preventive, and corrective maintenance on a diverse fleet that includes Ford F59s, Freightliner MT45s, E450/E350 Cutaways, Chevy Express 3500HDs, Ford F650 Straight Trucks, and Ford Transit 350 High Roof Vans, plus medium and heavy-duty equipment. This position operates on-site in our Willmar, MN shop, with potential for limited mobile service as our operation expands. Key Responsibilities ● Perform full-scope diagnostic and troubleshooting across gasoline, diesel, and electrical systems. ● Execute scheduled preventive maintenance (PM) and ensure DOT compliance on all fleet vehicles. ● Conduct advanced electrical and system diagnostics using medium- and heavy-duty diagnostic tools. ● Complete repairs and rebuilds on engines, transmissions, brakes, and suspension systems. ● Document work performed, time, and parts in fleet maintenance systems with precision. ● Identify root causes, not just symptoms, with a focus on zero-rework performance. ● Maintain clean, safe, and organized work areas in alignment with Big Inc safety and quality standards. ● Collaborate with leadership on repair planning, cost control, and uptime targets. ● Support future expansion by mentoring entry-level technicians as the shop grows. Performance Metrics You'll be measured by: ● Turnaround time and accuracy of repairs ● Number of trucks completed per week ● Billable hours efficiency ● Rework percentage and quality audit scores Requirements & Qualifications ● 5+ years of hands-on experience in automotive or commercial fleet repair (gas and diesel). ● ASE Certifications (preferred). ● DOT Certification (required or must obtain). ● Diesel Certification (preferred) ● CDL (preferred). ● Auto body repair experience- highly valued. ● Proficient with standard and medium-duty diagnostic systems; heavy-duty knowledge a plus. ● Skilled in electrical diagnostics, troubleshooting, and preventive maintenance programs. ● Must supply personal tools and diagnostic scanners. Specialty tools provided by Big Inc. ● Commitment to quality, accountability, safety, and integrity in every repair. Growth Path This position is designed for advancement. As Big Inc expands across multiple markets, this role can evolve into Shop Lead, Fleet Maintenance Manager, or Multi-Fleet Supervisor roles for the right performer. Why Big Inc ● Leadership-driven culture built on discipline, precision, and responsibility. ● No dealership pressure, focus on quality, not speed quotas. ● Expanding operation with stable year-round work and advancement opportunity. ● Be part of a company that's scaling fast and values elite technicians as the backbone of success. ● Competitive pay ($90k-$120k), performance bonuses, and growth incentives. Our Values: Be a DRIVER Discipline - Do what needs to be done, even when you don't feel like it Responsibility - Own your actions and outcomes Inspiring - Lead by example Veracity - Operate with honesty and transparency Effectiveness - Maximize impact through purposeful action Results - Deliver measurable outcomes that align with the mission ***Join the Team*** Ready to Build Something That Lasts? Send your resume to ***************************** and include “Master Tech” and where you found this posting in the subject line.
$90k-120k yearly 3d ago
Mechanic Journeyman
United Parcel Service 4.6
Mechanic job in Fargo, ND
Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state--Class A CDL. Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL). Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.24 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.
$38.2 hourly 60d+ ago
HVAC Journeyman Mechanic
Johnson Controls Holding Company, Inc. 4.4
Mechanic job in Grand Forks, ND
What you will do Johnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America. During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve. At Johnson Controls you'll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun. How will you do it We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and /or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard. Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Must be a member or willing to join a local Union. Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing. Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors. Able to use vibration equipment to trouble shoot drivelines. Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair. You will be required to pass a knowledge examination to assess proficiencies. Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting. You will work with other local market mechanics as well as Servicemen and apprentices. Attention to detail through interpersonal, digital, and written skills. Able to write and communicate to the customer problem, cause, and corrective actions. Able to provide quotes to customers and participate in JCI's Service Plus Rewards program. Self-starter with a passion/ desire to learn and apply on the job. Prioritize safety in all forms Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license Pay Range:$41.33 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
$41.3 hourly Auto-Apply 14d ago
Oilfield Mechanic (Heavy Duty Mechanic)
Deep Well Services 4.1
Mechanic job in Williston, ND
The Oilfield Mechanic (Heavy Duty Mechanic) is responsible for the inspection, maintenance, and repair of diesel-powered heavy equipment, trailers, hydraulic systems, and oilfield service units. This role includes both shop and field work, operating a service truck to perform mobile repairs, and providing troubleshooting and diagnostic support. Location: Rotational - Zelienople, PA / Williston, ND / Kilgore, TX / Midland, TX Job Type: Full-Time | Hourly | Non-Exempt Pay Range: $22.00 - $34.00/hour (Based on experience and skill level) Benefits: Health, Dental, Vision, Life & Voluntary Insurance Options 401(k) Retirement Program Paid Time Off (PTO) & Holidays Career Pathing & Competency-Based Advancement On the job training Schedule: Rotational Schedule - 28 days on / 14 days off Day, Night, Weekend, and Holiday shifts required 100% travel Essential Duties and Responsibilities: Diagnose and repair diesel engines (Cat, Detroit, Allison, Cummins) Perform maintenance on trucks, trailers, hydraulic systems, and emissions systems (DEF/DPF/Tier 4) Use diagnostic software: SIS, INSIGHT, Allison Rebuild hydraulic systems and perform field service repairs Mentor Mechanic 1 and trainee-level team members Maintain accurate records and documentation Operate forklifts and telehandlers Participate in on-call weekend rotation Work in various outdoor conditions (approx. 75% shop, 25% field) Qualifications: High School Diploma or GED 1-5+ years of verifiable diesel mechanic experience (oilfield preferred) Valid driver's license with a clean motor vehicle record Must pass pre-employment background check, physical, and drug screen Strong mechanical aptitude and attention to detail Ability to work flexible and irregular hours, including nights, weekends, and holidays Preferred Skills: Strong problem-solving and communication skills Experience mentoring others Familiarity with oilfield equipment, safety practices, and documentation Comfortable working under pressure and in a fast-paced environment Reports To: Maintenance Manager Disclaimer The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. EOE Statement Deep Well Services is an Equal Opportunity Employer. Deep Well Services does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other status protected under federal, state, or local law. All employment is decided on the basis of qualifications, merit, and business need.
$22-34 hourly 60d+ ago
Mechanical EIT
CMTA, Inc. 3.8
Mechanic job in Fargo, ND
**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. **Job Summary:** This position will perform routine engineering assignments under supervision from a knowledgeable mentor in the field. The Mechanical EIT will be responsible for mechanical system design, client meetings, equipment selection, construction observation, and other mechanical engineering responsibilities based on extent of knowledge with final approval from manager on majority of responsibilities. This position will collaborate with mechanical team members to ensure projects move forward smoothly while gaining knowledge and experience in the mechanical department. This position will be a growing experience with more duties and responsibilities assigned as experience is gained. **Essential Duties and Responsibilities:** + Correctly complete load calculations and select equipment for specific projects. + Occasionally required presence onsite and attendance at construction meetings to observe and report technical findings. + Professionally interact with mechanical team, other disciplines, and clients as needed. + Efficiently develop and maintain a balance and schedule between all projects and deadlines. + Seek mentorship and support to guarantee a successful design and project completion. + Other duties and responsibilities as assigned. **Qualifications (Education, Experience, and Licenses/Certifications required):** + Bachelor of Science in Mechanical Engineering. + 1-3+ years of experience + EIT is required or ability to obtain within 6 months of hire. + Working towards P.E. licensure. + Strong written and verbal communication skills. + Proven ability to work successfully on a team and listen carefully. + Desire to produce quality work and grow professionally in the engineering field. + Proven ability to maintain a high level of professionalism and build a trusting relationship with clients and owners. + Ability to work outside normal business hours as project schedules and deadlines require. + Proficiency in the use of Microsoft Office products. + Proven ability to maintain excellent integrity and ethical standards within role. No sponsorship is available for this position. \#LI-AC1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **401(k) Plan with Company Match:** Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. **Health & Welfare Benefits:** Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. **Life and Disability Insurance:** Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy up for additional coverage. **Time Off:** Flexible non-accrual vacation; company holidays per policy. _(For California employees, this is separate from California paid sick leave, if applicable.)_ **Expenses:** Business travel and related expenses reimbursed per company policy. **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Salary**
$50k-61k yearly est. 8d ago
Mechanic
s & s Transport Inc. 3.9
Mechanic job in Grand Forks, ND
Are You Ready for Your Next Big Opportunity? Do you have experience in diesel engine maintenance and repair? Are you looking for a dynamic role where your skills will be highly valued? S&S Transport is growing, and we're ready to welcome another Full-Time Diesel Maintenance Technician to our team! Pay is based on experience. About Us We're a family-owned trucking company based in Grand Forks, North Dakota, with terminals in Milton, Wisconsin, and Anniston, Alabama. Over the years, we've expanded to 160 trucks and drivers-and we're not stopping there! We want talented people like YOU to grow with us. What You'll Do Maintain and repair semi-trucks and trailers to keep our fleet running smoothly. Perform routine checks: oil changes, battery testing, brake inspections, and more. Use advanced tools and techniques to diagnose and fix issues, from motor analyzers to pneumatic wrenches. Collaborate with our skilled Shop Foreman, Service Writers, and Fleet Maintenance Manager. Bring your expertise to bear on welding, cooling systems, alignments, and beyond. Why join us? We value our team, and it shows in the benefits we offer: Highly Competitive Pay (based on experience) Annual Performance-Based Raises Multiple Health Insurance Plans (including Zero Deductible options) Dental & Vision Insurance Life Insurance Paid Time Off starting Day 1 Paid Holidays 401(k) with Company Match What We're Looking For Required Skills: Basic mechanic knowledge and hands-on repair experience. Your own set of tools. Strong problem-solving and teamwork skills. Ability to lift heavy equipment and work in tight spaces. Preferred (but not required): Technical certifications or degrees in mechanics. 2+ years of experience with diesel engines or truck repair. Welding and fabrication skills. CDL or prior trucking experience. Familiarity with shop tools and Microsoft Office. We're open to training mechanically inclined individuals who are eager to learn! Ready to Roll? Don't miss your chance to join a company that truly cares about its team. Call Terry Sannes at ************ or submit your application through ADP today!
$47k-58k yearly est. Auto-Apply 60d+ ago
Aircraft Mechanic - Customs & Border Protection
Amentum
Mechanic job in Grand Forks, ND
The CBP Aircraft Mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Principal Accountabilities: + Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. + Perform daily, flight line and hangar maintenance on all assigned aircraft. + Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. + Furnish own hand tools to perform maintenance of aircraft (necessary special tools and test equipment will be furnished by Customs). + May occasionally lead teams through more complex aircraft relevant tasks. + May be required to make entries in aircraft logs and records. + Must be able to prioritize workload schedules on assigned projects. Minimum Requirements: + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent required. + Must hold a current airframe and power plant mechanic (A&P) certificate. + Must be competent and knowledgeable in the repair and maintenance of airframes, hydraulics, fuel systems, and aircraft engines. + Requires broad knowledge of aircraft sheet metal/structural modification and repair. + Must possess a working knowledge of military and general aviation aircraft airframe and engine logbooks. + Must have basic knowledge of electrical theory. + Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. + Requires working knowledge of technical publications. + Able to follow base, federal and Company procedures for handling and disposal of hazardous waste materials. + Must be proficient in Office software applications to communicate through e-mail and various software applications.; especially Microsoft Outlook, Word, and Excel. + Ability to meet required deadlines and maintain necessary workflow. + Ability to read, write, understand, and communicate in the English language and follow both verbal and written instruction. + Must be able to read, write, speak, and understand English. + The ability to read and write and comprehend/interpret data. Physical Requirements/Working Environment: + Be physically able to perform aircraft mechanic duties. + Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. + Stand, squat, sit, walk, work with arms overhead for extended periods of time. + Pull, push, and lift up to 50 lbs. + On occasions, individuals may also be required to work in areas where high noise hazards prevail, thus requiring the use of adequate ear protection. Compensation: Hourly Rate: $40.81 Benefits: Amentum offers the following benefits for this position, subject to applicable eligibility requirements: medical, dental and vision insurance, 401(k) retirement plan, life insurance, long-term and short-term disability insurance, paid vacation, sick and parental leave. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .
$40.8 hourly 60d+ ago
Aircraft Mechanic I - CBA - AFGSC - Minot AFB
Vectrus (V2X
Mechanic job in Minot Air Force Base, ND
Performs scheduled and unscheduled airframe, engine, avionics, electrical, fuel, hydraulics, flight controls, drive train, and rotor maintenance on UH-1N Helicopters and other associated equipment, stands, AGE, tools, test equipment, vehicles, and shop support items in accordance with Company Standard Operating Procedures and the PWS. MAJOR JOB ACTIVITIES: * Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment conditions and/or operation. * Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. * Performs in-flight checks and testing to include rotor track and balancing, and vibration troubleshooting. * Performs cleaning and corrosion treatment on assigned equipment. * Performs flightline functions including ground handling, towing, jacking, refueling, marshaling, launch and recovery. * Documents all inspection and maintenance actions in aircraft forms and IMDS. * Performs Red X and IPI inspections. * Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. * Maintains hangar and grounds IAW Company and PWS requirements to include snow and weed removal. * Operates Ground Support Equipment. * Participates in FOD walks. * Knowledge and experience in technical, safety, and environmental issues involving helicopter maintenance. * Working knowledge of aircraft, including the following: structural/commnav/instrument/avionics/electrical/engine/gearbox/drive train/rotor systems with the ability to interpret and apply information on schematic diagrams, drawings and charts for fault isolation and repair of systems and subsystems. * Willing to travel on occasion. PHYSICAL DEMANDS: While performing the duties of this job, the employee is: * Exerting up to 50 lbs. of force occasionally, and/or up to 20 lbs. of force frequently, and/or up to 10 lbs. of force constantly to move objects. * CLIMBING - Ascending or descending using feet and legs and/or hands and arms. Body agility is emphasized (onto or off of helicopter) * HANDLING - Seizing, holding, grasping, turning, or otherwise working with hand or hands. Fingers are involved only to the extent that they are an extension of the hand (required for numerous tasks.) * EXPOSURE TO WEATHER - Exposure to hot, cold, wet, humid, or windy conditions caused by the weather (while conducting exterior ramp operations) * NOISE - Exposure to constant or intermittent sounds or a pitch or level sufficient to cause marked distraction or possible hearing loss (while conducting exterior ramp operations) WORKING ENVIRONMENT: * Ability to move about both inside aircraft hangar and outside on aircraft ramp within close proximity of running equipment and aircraft. SKILLS AND TECHNOLOGY USED: * USAF Integrated Maintenance Data System (IMDS) * Working knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. QUALIFICATIONS: * Education / Certifications: * USAF or equivalent aircraft maintenance formal military training or FAA A&P license required. * Must be able to obtain and maintain a DoD secret security clearance. * Experience: * USAF or equivalent aircraft maintenance, formal military training and/or FAA A&P license required. * Three years' aircraft maintenance experience (at least 1 year within the last 5 years of documented maintenance preferred). The current CBA rate for this position is $43.99/hr. Benefits Include the Following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.
$44 hourly 6d ago
Aircraft Mechanic I - CBA - AFGSC - Minot AFB
V2X Current Openings
Mechanic job in Minot Air Force Base, ND
Performs scheduled and unscheduled airframe, engine, avionics, electrical, fuel, hydraulics, flight controls, drive train, and rotor maintenance on UH-1N Helicopters and other associated equipment, stands, AGE, tools, test equipment, vehicles, and shop support items in accordance with Company Standard Operating Procedures and the PWS. MAJOR JOB ACTIVITIES: Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment conditions and/or operation. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Performs in-flight checks and testing to include rotor track and balancing, and vibration troubleshooting. Performs cleaning and corrosion treatment on assigned equipment. Performs flightline functions including ground handling, towing, jacking, refueling, marshaling, launch and recovery. Documents all inspection and maintenance actions in aircraft forms and IMDS. Performs Red X and IPI inspections. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Maintains hangar and grounds IAW Company and PWS requirements to include snow and weed removal. Operates Ground Support Equipment. Participates in FOD walks. Knowledge and experience in technical, safety, and environmental issues involving helicopter maintenance. Working knowledge of aircraft, including the following: structural/commnav/instrument/avionics/electrical/engine/gearbox/drive train/rotor systems with the ability to interpret and apply information on schematic diagrams, drawings and charts for fault isolation and repair of systems and subsystems. Willing to travel on occasion. PHYSICAL DEMANDS: While performing the duties of this job, the employee is: Exerting up to 50 lbs. of force occasionally, and/or up to 20 lbs. of force frequently, and/or up to 10 lbs. of force constantly to move objects. CLIMBING - Ascending or descending using feet and legs and/or hands and arms. Body agility is emphasized (onto or off of helicopter) HANDLING - Seizing, holding, grasping, turning, or otherwise working with hand or hands. Fingers are involved only to the extent that they are an extension of the hand (required for numerous tasks.) EXPOSURE TO WEATHER - Exposure to hot, cold, wet, humid, or windy conditions caused by the weather (while conducting exterior ramp operations) NOISE - Exposure to constant or intermittent sounds or a pitch or level sufficient to cause marked distraction or possible hearing loss (while conducting exterior ramp operations) WORKING ENVIRONMENT: Ability to move about both inside aircraft hangar and outside on aircraft ramp within close proximity of running equipment and aircraft. SKILLS AND TECHNOLOGY USED: USAF Integrated Maintenance Data System (IMDS) Working knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. QUALIFICATIONS: Education / Certifications: USAF or equivalent aircraft maintenance formal military training or FAA A&P license required. Must be able to obtain and maintain a DoD secret security clearance. Experience: USAF or equivalent aircraft maintenance, formal military training and/or FAA A&P license required. Three years' aircraft maintenance experience (at least 1 year within the last 5 years of documented maintenance preferred). The current CBA rate for this position is $43.99/hr. Benefits Include the Following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.
$44 hourly 6d ago
Aircraft Mechanic I - CBA - AFGSC - Minot AFB
V2X
Mechanic job in Minot Air Force Base, ND
Performs scheduled and unscheduled airframe, engine, avionics, electrical, fuel, hydraulics, flight controls, drive train, and rotor maintenance on UH-1N Helicopters and other associated equipment, stands, AGE, tools, test equipment, vehicles, and shop support items in accordance with Company Standard Operating Procedures and the PWS. **MAJOR JOB ACTIVITIES:** + Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment conditions and/or operation. + Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. + Performs in-flight checks and testing to include rotor track and balancing, and vibration troubleshooting. + Performs cleaning and corrosion treatment on assigned equipment. + Performs flightline functions including ground handling, towing, jacking, refueling, marshaling, launch and recovery. + Documents all inspection and maintenance actions in aircraft forms and IMDS. + Performs Red X and IPI inspections. + Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. + Maintains hangar and grounds IAW Company and PWS requirements to include snow and weed removal. + Operates Ground Support Equipment. + Participates in FOD walks. + Knowledge and experience in technical, safety, and environmental issues involving helicopter maintenance. + Working knowledge of aircraft, including the following: structural/commnav/instrument/avionics/electrical/engine/gearbox/drive train/rotor systems with the ability to interpret and apply information on schematic diagrams, drawings and charts for fault isolation and repair of systems and subsystems. + Willing to travel on occasion. **PHYSICAL DEMANDS:** While performing the duties of this job, the employee is: + Exerting up to 50 lbs. of force occasionally, and/or up to 20 lbs. of force frequently, and/or up to 10 lbs. of force constantly to move objects. + CLIMBING - Ascending or descending using feet and legs and/or hands and arms. Body agility is emphasized (onto or off of helicopter) + HANDLING - Seizing, holding, grasping, turning, or otherwise working with hand or hands. Fingers are involved only to the extent that they are an extension of the hand (required for numerous tasks.) + EXPOSURE TO WEATHER - Exposure to hot, cold, wet, humid, or windy conditions caused by the weather (while conducting exterior ramp operations) + NOISE - Exposure to constant or intermittent sounds or a pitch or level sufficient to cause marked distraction or possible hearing loss (while conducting exterior ramp operations) **WORKING ENVIRONMENT:** + Ability to move about both inside aircraft hangar and outside on aircraft ramp within close proximity of running equipment and aircraft. **SKILLS AND TECHNOLOGY USED:** + USAF Integrated Maintenance Data System (IMDS) + Working knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. **QUALIFICATIONS:** + Education / Certifications: + USAF or equivalent aircraft maintenance formal military training or FAA A&P license required. + Must be able to obtain and maintain a DoD secret security clearance. + Experience: + USAF or equivalent aircraft maintenance, formal military training and/or FAA A&P license required. + Three years' aircraft maintenance experience (at least 1 year within the last 5 years of documented maintenance preferred). The current CBA rate for this position is $43.99/hr. **Benefits Include the Following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.
$44 hourly 6d ago
Aircraft Mechanic - Fargo
Alpine Air 4.3
Mechanic job in Fargo, ND
Job title A&P Mechanic; [23021 - Aircraft Mechanic I] Fargo, ND Reports to Shop Supervisor Job purpose Alpine Air is currently seeking full time A&P Mechanics to join the crew at the Fargo, North Dakota company location. Candidates must meet our high standard of excellence for safety, resource management skills, and customer relations. Candidates must have strong interpersonal skills and a team player attitude. Duties and responsibilities The selected applicant will be responsible for but not limited to the following duties: Preventative maintenance of aircraft Line maintenance and repair Scheduled inspection of aircraft Replacing worn or damaged components, including turbine engine changes Basic mechanical and electrical troubleshooting Repairing, replacing, and rebuilding aircraft structures, including repairs involving aircraft sheet metal Qualifications Qualifications include: Must have A & P License Must have 2 years' experience as an A&P, with recent turboprop aircraft Preference given to Beech 1900 or King Air experience Knowledgeable of basic fixed wing aircraft maintenance Ability to locate and follow maintenance manual directions and component manuals Basic computer skills, including Microsoft Word Must pass background check and pre-employment drug screen Must have High School Diploma or Equivalent Must be eligible to work in the U.S. Working conditions While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes, toxic chemicals, and heat. Work for this position is performed outside, regardless of weather conditions. The noise level in the work environment is usually moderate. Compensation This position is a Full-Time position, 35-40 hours per week. Alpine Air offers competitive compensation and 401(k) with employer match. Generous Paid Time Off, eight (8) paid holidays per year, Medical, Dental, Vision, and Life Insurance are available immediately upon employment. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 70 pounds. The employee must be able to frequently bend, twist, lift, and practice safe lifting methods. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. Approved by: Max Crandall - Director of Human Resources Date approved: 03/02/2022 Reviewed: 03/02/2022 ALPINE AIR IS AN EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER. Prospective employees will receive consideration for employment without discrimination on the basis of race, color, religion, sex, age, national origin, ancestry, disability, veteran status, or any other factor prohibited by law or regulation. Potential candidates will be required to pass a pre-employment drug test prior to receiving an offer of employment. This employer participates in E-verify. Alpine Air will provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's I-9 to confirm work authorization.
$49k-76k yearly est. 60d+ ago
Aircraft Mechanic
Fargo Jet Center LLC 4.0
Mechanic job in Fargo, ND
Position Title: Aircraft Mechanic Location: Fargo Jet Center - Fargo, ND Shift: Monday-Friday | 8:00 AM - 5:00 PM Join a Leader in General Aviation Fargo Jet Center is a full-service general aviation company based in North Dakota, internationally recognized for excellence in aviation services. Consistently ranked among the top aviation service providers in North America, we are looking for skilled and motivated Aircraft Mechanics to join our team and contribute to our continued success. What You'll Do: As an Aircraft Mechanic at Fargo Jet Center, you'll be responsible for performing both scheduled and unscheduled maintenance on a wide variety of general aviation aircraft, including but not limited to: Piper, Cessna, Pilatus, Hawker, Beechcraft, Gulfstream, Bombardier, and Cirrus. You'll play a key role in maintaining safety, quality, and performance standards while collaborating with a team that takes pride in precision and professionalism. What We're Looking For: Active FAA A&P License required Experience in General Aviation, Commercial, or Military aviation settings is welcome Preference given to candidates with hands-on experience on Cessna, Pilatus, Learjet, King Air, Cheyenne, Citation, and/or Cirrus airframes Responsibilities: Perform high-quality inspections including 100-hour, annual, and phase inspections Diagnoses, test, repair, and maintain aircraft airframes and systems Troubleshoot and perform complex structural fitting and installations Utilize technical data to ensure compliant and accurate maintenance Order parts and components as needed Complete documentation per FAA regulations and company policy Collaborate with the Maintenance Director and Leads; perform other duties as assigned What We Offer: Comprehensive health benefits (Medical, Dental, Vision) HSA and flexible spending programs Life and Accidental Death & Dismemberment insurance (100% Company Paid) Long-Term Disability insurance (100% Company Paid) 401(k) with employer match Paid time off and paid holidays Employee Assistance Program (EAP) and Wellness Program If you're ready to advance your aviation maintenance career with a trusted and dynamic team, apply today and help keep our fleet flying safely! Fargo Jet Center has a Drug Free Workplace Policy which includes applicants passing pre-employment testing. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. FAA and DOT applicants who become employees of Fargo Jet Center will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
$44k-77k yearly est. Auto-Apply 60d+ ago
Master Mechanic (Watford City, ND)
Central Specialties 3.9
Mechanic job in Watford City, ND
Central Specialties, Inc. is a third generation, family owned, general road contracting company serving Minnesota and the Dakotas. We take pride in the reputation we have built for providing responsive customer service, on the job safety, efficient and high-quality products and services. Our skilled workforce of 400+ employees is dedicated to quality and excellence. It's the pride our employees take in their work that keeps CSI at the top of the industry. What sets us apart: Family owned and operated Best equipment and technology Building the best roads start to finish Benefits of joining our team! Traveling throughout Minnesota and the Dakotas Company paid training opportunities We promote from within Family owned and operated As a Master Mechanic the purpose of this position is to repair and maintain a variety of heavy construction equipment. Ideally, candidates will work year-round. During the non-construction season, work will be performed in our shop. During the construction season travel will be required. Requirements: Must be able to travel throughout Minnesota, North and South Dakota 2-year AAS degree in Diesel Technology 7+ years of training and experience in working on diesel engines Regular, consistent attendance and regular overtime at all assigned job sites Valid Commercial Driver's License, Class A Acceptable motor vehicle record Ability to work cooperatively with others Physical strength and endurance to perform all principal duties and responsibilities Responsibilities: Analyzes operation of systems and components of heavy trucks and heavy construction equipment to determine performance using engineering specifications and test equipment. Inspects mechanical and electrical systems, diagnoses and repairs systems. Disassembles systems, examines parts for defects and excessive wear. Repairs or replaces defective parts, adjusts settings and reassembles according to specifications. Operates electronic testing equipment, precision instruments and gauges, hand tools, portable power tools, welding and cutting equipment and cranes and hoists. Welds and fabricates parts as needed. Performs other tasks as needed. Complies with Company Safety Program. Benefits: Group Health Insurance Vision Insurance Dental Insurance 401(k) Retirement Savings Plan 401 (k) Company Match 401(k) Company Discretionary Contribution Health Savings Account (HSA) Basic Life Insurance Paid Holidays (Year-round, full-time employees) Paid Time Off (Year-round, full-time employees) Tool Reimbursement for Mechanics Company Provided Work Uniforms Per Diem Electronic Direct Deposit We value a diverse workplace and believe it enhances our company culture and the services we provide. Qualified female, minority, veteran, and disabled applicants are encouraged to apply. Central Specialties is an equal opportunity, affirmative action employer.
$38k-50k yearly est. 60d+ ago
Mechanic Journeyman in Dickinson, North Dakota
United Parcel Service 4.6
Mechanic job in Dickinson, ND
Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team in Dickinson, North Dakota. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, from various manufacturers. These vehicles' propulsion systems include diesel and gasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) preferred. Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.24 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.
$38.2 hourly 60d+ ago
Mechanic
S & S Transport Inc. 3.9
Mechanic job in Grand Forks, ND
Are You Ready for Your Next Big Opportunity? Do you have experience in diesel engine maintenance and repair? Are you looking for a dynamic role where your skills will be highly valued? S&S Transport is growing, and we're ready to welcome another Full-Time Diesel Maintenance Technician to our team! Pay is based on experience. About Us We're a family-owned trucking company based in Grand Forks, North Dakota, with terminals in Milton, Wisconsin, and Anniston, Alabama. Over the years, we've expanded to 160 trucks and drivers-and we're not stopping there! We want talented people like YOU to grow with us. What You'll Do Maintain and repair semi-trucks and trailers to keep our fleet running smoothly. Perform routine checks: oil changes, battery testing, brake inspections, and more. Use advanced tools and techniques to diagnose and fix issues, from motor analyzers to pneumatic wrenches. Collaborate with our skilled Shop Foreman, Service Writers, and Fleet Maintenance Manager. Bring your expertise to bear on welding, cooling systems, alignments, and beyond. Why join us? We value our team, and it shows in the benefits we offer: Highly Competitive Pay (based on experience) Annual Performance-Based Raises Multiple Health Insurance Plans (including Zero Deductible options) Dental & Vision Insurance Life Insurance Paid Time Off starting Day 1 Paid Holidays 401(k) with Company Match What We're Looking For Required Skills: Basic mechanic knowledge and hands-on repair experience. Your own set of tools. Strong problem-solving and teamwork skills. Ability to lift heavy equipment and work in tight spaces. Preferred (but not required): Technical certifications or degrees in mechanics. 2+ years of experience with diesel engines or truck repair. Welding and fabrication skills. CDL or prior trucking experience. Familiarity with shop tools and Microsoft Office. We're open to training mechanically inclined individuals who are eager to learn! Ready to Roll? Don't miss your chance to join a company that truly cares about its team. Call Terry Sannes at ************ or submit your application through ADP today!
$47k-58k yearly est. Auto-Apply 60d+ ago
Aircraft Mechanic II - Customs and Border Protection
Amentum
Mechanic job in Grand Forks, ND
The CBP Aircraft Mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Principal Accountabilities: + Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. + Perform daily, flight line and hangar maintenance on all assigned aircraft. + Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. + Furnish own hand tools to perform maintenance of aircraft (necessary special tools and test equipment will be furnished by Customs). + May occasionally lead teams through more complex aircraft relevant tasks. + May be required to make entries in aircraft logs and records. + Must be able to prioritize workload schedules on assigned projects. Minimum Requirements: + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent required. + Must hold a current airframe and power plant mechanic (A&P) certificate. + Must be competent and knowledgeable in the repair and maintenance of airframes, hydraulics, fuel systems, and aircraft engines. + Requires broad knowledge of aircraft sheet metal/structural modification and repair. + Must possess a working knowledge of military and general aviation aircraft airframe and engine logbooks. + Must have basic knowledge of electrical theory. + Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. + Requires working knowledge of technical publications. + Able to follow base, federal and Company procedures for handling and disposal of hazardous waste materials. + Must be proficient in Office software applications to communicate through e-mail and various software applications.; especially Microsoft Outlook, Word, and Excel. + Ability to meet required deadlines and maintain necessary workflow. + Ability to read, write, understand, and communicate in the English language and follow both verbal and written instruction. + Must be able to read, write, speak, and understand English. + The ability to read and write and comprehend/interpret data. Physical Requirements/Working Environment: + Be physically able to perform aircraft mechanic duties. + Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. + Stand, squat, sit, walk, work with arms overhead for extended periods of time. + Pull, push, and lift up to 50 lbs. + On occasions, individuals may also be required to work in areas where high noise hazards prevail, thus requiring the use of adequate ear protection. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .
$48k-77k yearly est. 60d+ ago
HVAC Truck Based Journeymen Mechanic - (un)
Johnson Controls Holding Company, Inc. 4.4
Mechanic job in Minot, ND
What you will do Johnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America. JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve. At Johnson Controls you'll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun. **Candidates located in Williston, ND are preferred for this role** How will you do it We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and /or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard. Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Must be a member or willing to join the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada, AFL-CIO. Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing. Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors. Able to use vibration equipment to trouble shoot drivelines. Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair. You will be required to pass a knowledge examination to assess proficiencies. Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting. You will work with other local market mechanics as well as Servicemen and apprentices. Attention to detail through interpersonal, digital, and written skills. Able to write and communicate to the customer problem, cause, and corrective actions. Able to provide quotes to customers and participate in JCI's Service Plus Rewards program. Self-starter with a passion/ desire to learn and apply on the job. Prioritize safety in all forms Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license Pay Range: $43.94 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers #LI - AD2 #TechnicalHiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
$43.9 hourly Auto-Apply 19d ago
Aircraft Mechanic
Fargo Jet Center LLC 4.0
Mechanic job in Fargo, ND
Aircraft Mechanic Shift: Monday-Friday | 8:00 AM - 5:00 PM Join a Leader in General Aviation Fargo Jet Center is a full-service general aviation company based in North Dakota, internationally recognized for excellence in aviation services. Consistently ranked among the top aviation service providers in North America, we are looking for skilled and motivated Aircraft Mechanics to join our team and contribute to our continued success. What You'll Do: As an Aircraft Mechanic at Fargo Jet Center, you'll be responsible for performing both scheduled and unscheduled maintenance on a wide variety of general aviation aircraft, including but not limited to: Piper, Cessna, Pilatus, Hawker, Beechcraft, Gulfstream, Bombardier, and Cirrus. You'll play a key role in maintaining safety, quality, and performance standards while collaborating with a team that takes pride in precision and professionalism. What We're Looking For: Active FAA A&P License required Experience in General Aviation, Commercial, or Military aviation settings is welcome Preference given to candidates with hands-on experience on Cessna, Pilatus, Learjet, King Air, Cheyenne, Citation, and/or Cirrus airframes Responsibilities: Perform high-quality inspections including 100-hour, annual, and phase inspections Diagnoses, test, repair, and maintain aircraft airframes and systems Troubleshoot and perform complex structural fitting and installations Utilize technical data to ensure compliant and accurate maintenance Order parts and components as needed Complete documentation per FAA regulations and company policy Collaborate with the Maintenance Director and Leads; perform other duties as assigned What We Offer: Comprehensive health benefits (Medical, Dental, Vision) HSA and flexible spending programs Life and Accidental Death & Dismemberment insurance (100% Company Paid) Long-Term Disability insurance (100% Company Paid) 401(k) with employer match Paid time off and paid holidays Employee Assistance Program (EAP) and Wellness Program If you're ready to advance your aviation maintenance career with a trusted and dynamic team, apply today and help keep our fleet flying safely! Fargo Jet Center has a Drug Free Workplace Policy which includes applicants passing pre-employment testing. Applicants testing positive for the presence of prohibited drugs are ineligible for employment. FAA and DOT applicants who become employees of Fargo Jet Center will also be subject to random, reasonable cause, reasonable suspicion, and post-accident testing. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
$44k-77k yearly est. Auto-Apply 60d+ ago
Aircraft Mechanic II - Customs and Border Protection
Amentum
Mechanic job in Grand Forks, ND
The CBP Aircraft Mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Principal Accountabilities: Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Perform daily, flight line and hangar maintenance on all assigned aircraft. Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. Furnish own hand tools to perform maintenance of aircraft (necessary special tools and test equipment will be furnished by Customs). May occasionally lead teams through more complex aircraft relevant tasks. May be required to make entries in aircraft logs and records. Must be able to prioritize workload schedules on assigned projects. Minimum Requirements: Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent required. Must hold a current airframe and power plant mechanic (A&P) certificate. Must be competent and knowledgeable in the repair and maintenance of airframes, hydraulics, fuel systems, and aircraft engines. Requires broad knowledge of aircraft sheet metal/structural modification and repair. Must possess a working knowledge of military and general aviation aircraft airframe and engine logbooks. Must have basic knowledge of electrical theory. Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Requires working knowledge of technical publications. Able to follow base, federal and Company procedures for handling and disposal of hazardous waste materials. Must be proficient in Office software applications to communicate through e-mail and various software applications.; especially Microsoft Outlook, Word, and Excel. Ability to meet required deadlines and maintain necessary workflow. Ability to read, write, understand, and communicate in the English language and follow both verbal and written instruction. Must be able to read, write, speak, and understand English. The ability to read and write and comprehend/interpret data. Physical Requirements/Working Environment: Be physically able to perform aircraft mechanic duties. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Stand, squat, sit, walk, work with arms overhead for extended periods of time. Pull, push, and lift up to 50 lbs. On occasions, individuals may also be required to work in areas where high noise hazards prevail, thus requiring the use of adequate ear protection. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
$48k-77k yearly est. Auto-Apply 60d+ ago

Learn more about mechanic jobs

Do you work as a mechanic?

What are the top employers for mechanic in ND?

Central Diesel Sales

Northwest Tire

D.L. Withers Construction

SpartanNash

S.S. White

American Crystal Sugar

JP Energy Partners LP

Noble Corporation

Top 10 Mechanic companies in ND

Central Diesel Sales
Northwest Tire
D.L. Withers Construction
SpartanNash
S.S. White
American Crystal Sugar
JP Energy Partners LP
Noble Corporation
CMTA
Energy Transfer

Job type you want

Full Time

Part Time

Internship

Temporary

Browse mechanic jobs in north dakota by city

All mechanic jobs

Jobs in North Dakota

Zippia Careers
Installation, Maintenance and Repair Industry
Mechanic Jobs
Locations
Mechanic North Dakota Jobs

Mechanic jobs in North Dakota - 522 jobs

Diesel Fleet Mechanic Technician III

Master Automotive Technician

Mechanic Journeyman

HVAC Journeyman Mechanic

Oilfield Mechanic (Heavy Duty Mechanic)

Mechanical EIT

Mechanic

Aircraft Mechanic - Customs & Border Protection

Aircraft Mechanic I - CBA - AFGSC - Minot AFB

Aircraft Mechanic I - CBA - AFGSC - Minot AFB

Aircraft Mechanic I - CBA - AFGSC - Minot AFB

Aircraft Mechanic - Fargo

Aircraft Mechanic

Master Mechanic (Watford City, ND)

Mechanic Journeyman in Dickinson, North Dakota

Mechanic

Aircraft Mechanic II - Customs and Border Protection

HVAC Truck Based Journeymen Mechanic - (un)

Aircraft Mechanic

Aircraft Mechanic II - Customs and Border Protection

Learn more about mechanic jobs

Do you work as a mechanic?

What are the top employers for mechanic in ND?

Top 10 Mechanic companies in ND

Central Diesel Sales

Northwest Tire

D.L. Withers Construction

SpartanNash

S.S. White

American Crystal Sugar

JP Energy Partners LP

Noble Corporation

CMTA

Energy Transfer

Browse mechanic jobs in north dakota by city

All mechanic jobs

Jobs in North Dakota