Mechanic jobs in Paterson, NJ

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Compensation: $40 / hour + Paid OT Location: Bronx, NY Schedule: Monday to Friday, 4AM to 12:30PM Responsibilities: The Fleet Mechanic position is responsible for preventive maintenance, troubleshooting, diagnosis and repair of fleet vehicles and equipment as assigned. Maintain, troubleshoot, and repair all fleet vehicles within assigned Primo Water North America locations. Respond to field service calls. Order mechanical components, services and parts and maintain inventory. Perform and document all phases of vehicle maintenance and repair, including diagnostics. Maintain communication with drivers and management regarding maintenance and service of vehicles and equipment. Maintain a unit history file for each vehicle Qualifications: Must be 21 years of age or older. Experience with both diesel /propane vehicles and air brake systems, preferably with heavy duty vehicles. Engine and Chassis Diagnostic software experience. Focus on safe work practices and high quality while executing duties under minimal supervision. Accurately record and document all maintenance activity. Ability to use fleet software for vehicle maintenance tracking, input work orders, and inventory management. Workflow -- Daily Vehicle Inspection Report (DVIR) and US DOT requirements for commercial vehicles. Ability to lift parts and equipment weighing up to 50 pounds. Must have own set of personal tools. Ability to meet Department of Transportation (DOT) driver qualification policy requirements. CDL preferred; ability to obtain within six (6) months of entering the position (CDL may be required in some locations) Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We're proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Knowledge in welding and fabrication, electrical high voltage 480V, hydraulics pumps and motors, able to read electrical and hydraulic schematics Applicants must be at least 18 years of age and legally eligible to work in the United States. A valid driver's license is required. CDL preferred. Experience working on heavy duty diesel equipment OR training from a recognized trade school is required. Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. Must be able to meet the physical and safety requirements of the position. Must be able to provide own tools Requirements and Qualifications:: 2+ years experience working as a heavy duty Diesel Mechanic Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar. Yellow Iron experience and/or experience as a Mechanic or Technician for a refuge company is a plus. Working knowledge of applicable DOT and OSHA standards and regulations. Other duties as assigned Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Automotive Technician/Mechanic -Time to move up with this opportunity!! Overloaded with business. While professional experience and qualifications are key for this role, make sure to check you have the preferable soft skills before applying if required. Premium Luxury Volume Import dealership, with a great location, providing factory training. fully stocked parts department, latest equipment/tools (fully maintained) with no "politics" distributing the service work fairly based on your ability on wanting to work with having proven experience. Super support staff and a great clientele ensure your success!! Earn what you deserve. xevrcyc *ASK ABOUT OUR $5000 SIGN UP BONUS!! * Pay is commensurate with experience Call direct or Apply online ************** looking forward to your response! Rosalina

**Before you apply to a job, select your language preference from the options available at the top right of this page.** Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. **Job Description:** Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel and gasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. **Responsibilities and Duties** + Meets D.O.T requirements required by job assignment + Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday + Sits infrequently, as required, throughout duration of workday + Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks + Operates standard and manual transmission + Operates power and pneumatic tools **Requirements** + Must have an active driver's license issued by the state + Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. + Must possess the required hand tools required to perform the applicable job assignment. **Knowledge and Skills** + Current documented automotive mechanical experience + Experience using diagnostic equipment, scan tools and personal computer + Possesses full complement of personal hand tools + Class A/B or A Commercial Driver's License (CDL) - **Preferred** + Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis + Available to work varying shifts, additional hours and/or overtime depending on service needs + Wears personal protective equipment as required + Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. + Works cooperatively in a diverse work environment + Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions **Employee Type:** Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. **Other Criteria:** UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. **Basic Qualifications:** Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. **Pay Range:** For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $39.89/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

About Us Elizabethtown Gas is a natural gas utility company that delivers safe, reliable, and affordable natural gas to over 300,000 residential, commercial, and industrial customers in Union, Middlesex, Sussex, Warren, Hunterdon, Morris, and Mercer counties. At our core, we're dedicated to being a committed community partner, delivering exceptional customer service and developing innovative clean energy solutions to meet the needs of the future. At Elizabethtown Gas, we believe that our employees are our most valuable asset. Whether you're a seasoned operations technician or an early-career legal professional, our culture, inclusive workforce, and leadership development and training programs will provide you with the tools you need to either kickstart your career or bring it to new heights. Position Summary Hours: Monday - Friday, 7 AM - 3:30 PM with rotating on call off hour and weekend standby. Overtime as needs dictate. Bidding Completed 9/25/25 Basic Function: Performs construction and maintenance on Elizabethtown Gas Company distribution systems. Essential Functions: Performs construction and maintenance on Elizabethtown Gas Company distribution systems Installation of mains and services. Repairs gas leaks Pipe coating Locating and mark-outs Main and service deactivation and activation Valve lubrication and maintenance Plastic fusion First response to potential leaks and other gas-related emergencies Responsible for completing all associated paperwork for the above described Operate a Kubota and Backhoe Qualifications Working Conditions/Physical Requirements: Work in all types of weather conditions Ability to lift 100 lbs. Routinely operate jackhammers & rotary drills Using a shovel to hand excavate Required to wear a full-face respirator Hours/day of standing or operating in confined spaces (trench) May have to work for up to 16 hours straight during emergency conditions Required to drive company vehicles for short lengths of time throughout the day Required to work Stand-By (24-hour on-call) Requires bending, kneeling, and operating tools in confined space conditions This is a DOT-covered position and will be subject to random drug screening. Work location(s) may vary based on language as defined in the CBA. Required Experience: Experience in construction work Familiar with the use of air tools and construction equipment Valid NJ Driver's License Preferred Skills/Background: CDL Required Background: High School diploma; Or equivalent academic education and experience may be considered. Explore the Possibilities South Jersey Industries employs a diverse range of talent - from construction contractors to environmental specialists. Regardless of the position, mentoring and networking, hands-on experience, gaining industry knowledge and the opportunity to make a meaningful impact on our business and in our communities are all exciting ways that we welcome our employees at SJI. And as a company committed to creating an engaging culture built on inclusion and diversity, you're sure to find an opportunity that makes you feel included, empowered, and ready to “bring your whole self to work” every day. Benefits Package Overview SJI offers a competitive and comprehensive benefits package to eligible employees. The SJI “Total Rewards” Benefits Package include: Flexible vacation, Paid Time Off, and Sick Leave package Comprehensive Health, Dental, and Vision Insurance Short-term and Long-term Disability Insurance 401(k), with generous company match Employee Resource Groups to encourage employee engagement, nurture professional development, and foster an inclusive environment. Equal Opportunity/Affirmative Action Employer At this time, SJI is only considering applicants authorized to work in the United States currently and in the future without the need for visa sponsorship. Compensation Range: Start Rate - 31.75 USD We are committed to pay transparency and ensuring equitability compensation for all employees. The pay range for this position reflects the base salary only and does not include benefits, bonuses, or other forms of compensation that might be part of the total compensation package. The specific salary offered will be based on a candidate's qualifications, education, and experience.

Employee Type: Regular-Full time Union/Non: The Mechanical Technician II ensures the proper operation, compliance, inspection, maintenance, troubleshooting, and repair of station systems such as air systems, air dryer systems, fuel systems, cooling systems, gas compression, and prime movers. This role is crucial for maintaining gas delivery through the compressor station. At Enbridge, we believe in the power of collaboration and inclusion. We are committed to encouraging an environment where every team member can contribute their best. Our culture is built on trust, respect, and the drive to achieve world-class results. We offer competitive compensation, comprehensive benefits, and opportunities for professional growth. Join us and be part of a company that is determined to make a difference in the energy sector! Are you interested? Apply today!! Here's what you will do: Recognize and react to abnormal conditions associated with duties. Complete reports accurately and completely. Consistently work in a safe, responsible manner and actively participate in safety-related programs. Actively participate as a work group team member and maintain a cooperative work relationship with fellow employees. Perform work in compliance with Company policies/procedures as well as external regulatory bodies through adherence to Standard Operating Procedures (SOPs) and Operation and Maintenance (O&M) Manuals. No formal supervision exercised by this position; however, role may be required to provide basic guidance to contractors or less experienced employees. Who you are: You have: A high school diploma or equivalent with a minimum of 2 years of directly relevant training and experience. Strong technical and analytical skills demonstrated through training, formal education, and/or experience. You can: Demonstrate a detailed understanding of Enbridge Safety Policies and Procedures and act in accordance with them at all times. Communicate verbally and in writing to collect and relay basic facts. You are: Willing to assist with more complex tasks, equipment and procedures. Able to work with significant independence. Proficient in the use of standard office software applications. Able to work and contribute to a team environment where inclusiveness, integrity, honesty, and openness are valued. *Sign on Bonus available, up to 10K USD.* Working Conditions: Primarily field-oriented (outdoor) with specific office (indoor) functions for training, meetings, and documentation of required tasks dictated by the Department of Transportation and other regulatory agencies for which Enbridge must comply. Must be able to perform physically demanding activities in all types of weather conditions. Must be able and willing to work overtime, weekends, shift, on call & standby, and travel overnight as required. Currently resides or is willing to relocate within 30 miles of the assigned reporting location. Physical Requirements include but are not limited to: Grasping, kneeling, light - moderate lifting (objects up to 50 pounds), reaching above shoulder, repetitive motion, typing, sitting, standing, visual requirement (able to see screens, detect color coding, read fine print), hearing requirement and the ability to sit at a computer for long periods of time. Mental Requirements (Both Field & Office) include but are not limited to: Ability to: understand, remember and apply oral and/or written instructions or other information, understand complex problems and collaborate/explore alternative solutions, organize thoughts and ideas into understandable terminology, organize and prioritize work schedule on a short-term basis, make decisions which have moderate impact on the immediate work unit and monitor impact outside this area, understand and follow basic instructions and guidelines, complete routine forms, compose letters, outlines, memoranda and basic reports and communicate with individuals via telephone. Company paid international relocation assistance is not offered for this role. #topemployer At Enbridge, we are dedicated to our core value of Inclusion. We are proud to be an Equal Opportunity Employer. We are committed to providing employment opportunities to all qualified individuals, without regard to age, race, color, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, marital status, family status, veteran status, Indigenous status, disability, or any other reason protected by federal, state, or local law. Applicants with disabilities can request accessible formats, communication supports, or other accessibility assistance by contacting ********************. Information For Applicants: Applications can be submitted via our online recruiting system only. We appreciate your interest in working with us; however, only those applicants selected for interviews will be contacted. Final candidates for this position may be required to undergo a security screening, including a criminal records check. To learn more about us, visit ****************

Under supervision, candidates will inspect, maintain, adjust and repair passenger and freight elevator systems; maintain adequate elevator service to developments; provide safe elevator service to NYCHA residents. Duties shall include but not be limited to the following: 1. Lubricate and clean all components of hydraulic and electric elevator systems. 2. Make adjustments as required to contactors and controllers in the electrical and hydraulic elements of elevator systems. 3. Inspect and check doors, cable rails, bumpers, safeties, overloads, relays, sheaves and governors to assure continued safe operations. 4. Re-rope and re-wire elevator systems as required. 5. Check out troubles in all types of elevator and escalator systems. 6. Perform necessary adjustments and/or repairs to all elevator mechanical and electrical components and their control systems. 7. Inspect, maintain, adjust and repair escalators, platform lifts, conveyors and dumbwaiters. 8. Operate a motor vehicle in the performance of assigned duties. Note: Eligible candidates may be required to pass a practical exam evaluating their ability to perform typical Elevator Mechanic tasks (i.e. trouble shooting, wiring door operators, print reading, etc.) License Requirement: At the time of appointment, candidates must possess the following to be considered for these positions: 1. A valid New York State Elevator Mechanic License 2. A valid New York City Elevator Agency Technician License 3. A valid Department of Labor Technician's License 4. Department of Buildings Technician's License 5. Department of Buildings Inspector License (preferred) These licenses must be maintained for the duration of your employment. You will be responsible for the payment of any fees associated with the maintenance of these licenses. NOTE: IF THIS APPOINTMENT IS MADE ON A PROVISIONAL BASIS PURSUANT TO 65 OF THE NYS CIVIL SERVICE LAW, NO TENURE OR PERMANENCE ACCRUES TO AN INCUMBENT IN THIS POSITION BY VIRTUE OF SUCH APPOINTMENT. NOTE: This position is open to qualified persons with a disability who are eligible for the 55-a Program. Please indicate in your cover letter that you would like to be considered for the position under the 55-a Program. For detailed information regarding the 55-a Program, click on the link below: ************************* Additional Information: 1. For NYCHA employees: employees applying for promotional, title or level change opportunities must have served a period of one year at current location and in current title and level (if applicable). 2. NYCHA residents are encouraged to apply. NYCHA provides benefits that include a choice of medical coverage plans, deferred compensation plans and a defined pension benefit plan as a member of the New York City Employees Retirement System (NYCERS). Please read this posting carefully to make certain you meet the minimum qualification requirements before applying to this position. ELEVATOR MECHANIC - 90710 Minimum Qualifications 1. Five years of full-time satisfactory experience acquired within the last ten years as an elevator mechanic; or 2. Not less than four and one-half years of the experience described in ""1"" above plus one of the following: A) At least 6 months of closely related experience in the repair and maintenance of electrical or electromechanical control systems, or electrical, hydraulic or mechanical components of the following: escalators, drawbridges, aircraft, rail cars, or mechanical doors; or B) At least 600 hours of training acquired at a trade or technical school or vocational high school or completed post-secondary education, approved by a state's Department of Education or comparable governmental agency, with a major course of study in mechanical, electromechanical, electrical or electronic technology or closely related field. License Requirements At the time of appointment, candidates will be required to possess a Motor Vehicle Driver License valid in the State of New York. This license must be maintained for the duration of employment. 55a Program This position is also open to qualified persons with a disability who are eligible for the 55-a Program. Please indicate at the top of your resume and cover letter that you would like to be considered for the position through the 55-a Program. Public Service Loan Forgiveness As a prospective employee of the City of New York, you may be eligible for federal loan forgiveness programs and state repayment assistance programs. For more information, please visit the U.S. Department of Education's website at ***************************** Residency Requirement NYCHA has no residency requirements. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. **ESSENTIAL DUTIES AND FUNCTIONS** The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. + Maintains Beech King Air B300 aircraft in support of aircrew missions. + Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. + Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. + Advises management of deficiencies affecting aircraft airworthiness. + Maintains aircraft support equipment inventory. + Performs inspections, and accomplishes refurbishment and phase maintenance. + Prepares and maintains aircraft maintenance records and historical documents. + Monitors/reviews deficiency reports for adverse trends. + Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. + Performs in-progress and follow-up inspections to ensure quality of work. + Researches, orders, and receives aircraft parts. + Prepares parts for turn-in to the supply system. Initiates material reports as required. + Maintains hand tools and special tools in safe and serviceable condition. + Adhere to company tool accountability procedures. + Reports unserviceable tools and equipment to appropriate parties. + Annotates equipment/tools inspection and condition documents. + Checks serviceability, and maintains and operates powered and non-powered support equipment. + Complies with established policies, procedures, and standards. + Complies with all safety, bioenvironmental, security, and housekeeping standards. + Operates special purpose and regular vehicles as required. + Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. + Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. + Monitors bench stock items and assists with and/or performs inventory inspections. + Maintains supply discipline in the work center at all times. + Actively participates in the Safety Program. + Ensures HAZMAT processes are followed. + Performs aircraft movements and FOD prevention walks on the flight line. + Completes maintenance documentation using required forms. + Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. + Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. + Performs aircraft, basic post-flight, and periodic/phase inspections. + Operate and maintain GSE, flight line vehicles, and other support equipment as required. + Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. + Performs other job-related duties as assigned. + **Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures.** **EDUCATION and/or EXPERIENCE:** + High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required + Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) + Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. + Experience shall be in a similar position within the last twelve (12) months. **Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS:** The following are required: + Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) + Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) + Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs + Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake + Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals + Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) + Ability to retain information and make decisions according to standard policies and procedures + Ability to determine work methods to accomplish assignments + Working knowledge of applicable FAA Federal Aviation Regulations + Ability to make proper entries in aircraft logs and records + Obtain a DOJ Security Clearance as required + Have and maintain a valid driver's license + Must be a U.S. citizen **PHYSICAL DEMANDS:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. **WORK ENVIRONMENT:** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. **Benefits include the following:** + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays. + Learning and Development resources + Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed are examples of work/tasks but are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. Cleans aircraft exterior and interior including parts and subassemblies using a variety of cleaners, polishes, compounds, solvents, and other cleaning solutions. Services aircraft including oil reservoirs, oxygen, and nitrogen; lubricates specified components using a grease gun and other methods; inflates tires; fuels and refuels aircraft. Performs aircraft ground handling duties such as operating aircraft tow vehicles and repositioning aircraft to and from congested areas like an aircraft hangar, to aircraft ramp areas for customer launch and recovery and positioning aircraft in the hangar at the close of business. Cleans hangar floor by operating industrial floor cleaning machinery; arranges equipment, stands, and other items in the hangar in a neat and orderly manner. Assists Aircraft Mechanics in servicing, repairing, and overhauling aircraft and aircraft engines, performing any combination of the following duties: Adjusts and replaces parts such as control cables, fuel tanks, spark plugs, tires, batteries, and filters, using mechanic's tools. Removes inspection plates, cowling, engine covers, floorboards, and related items to provide access for inspection and repair, and replaces items when work is completed. Disconnects instruments, ignition systems, and fuel and oil lines. Assists in dismantling, repairing, overhauling, or replacing parts and assemblies such as engines, plumbing, and hydraulic systems, and aircraft structural sections. Performs routine duties such as furnishing materials, tools, and supplies to the mechanic; lifting and holding materials in place during operation; cleaning work areas and machines, tools, and equipment. May assist flight line mechanics in servicing and repairing aircraft prior to flight. Performs duties in a safe and efficient manner following all company-established safety and environmental rules, regulations, and guidelines. Able to work any assigned shift or schedule, including customer mission support outside normal duty hours and travel as required supporting mission requirements. Performs other duties as assigned. The incumbent performs other job-related tasks as assigned and required; any duties/tasks included in the employee's performance evaluation elements are essential to that employee's position within the job classification. EDUCATION and/or EXPERIENCE: High School diploma or GED equivalent required. Two to three years experience in aircraft servicing and/or maintenance as a helper desired. Must have the mental and visual ability to read understand and interpret detailed technical publications and instructions. Must demonstrate safe operation of aircraft ground support vehicles including tow vehicles, floor scrubbers, and Cushman. May hold a valid Airframe, or Powerplant, or both certificates issued by Federal Aviation Administration (FAA) but not required for this job. KNOWLEDGE, SKILLS, ABILITIES, AND OTHER CHARACTERISTICS: Must be able to: Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Retain information and make decisions according to standard policies and procedures. Obtain/maintain a DoD and/or DOJ Security Clearance as required. Must have and maintain a valid driver's license Must maintain a valid US Passport and the appropriate vaccinations required for international travel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works on the hangar floor the majority of the shift and is required to stand; walk, stoop, kneel, crouch, crawl and climb ladders or elevated stands. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must be able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: Will be subject to initial and random drug screening The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day-to-day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where employees will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and the risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. #MAINT #VETS

MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck , Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: Union Pension Plan Medical, Dental, Vision benefits available Vacation Time Retirement Plan Opportunities Overtime Opportunities Competitive wages Supplemental Pay (bonus pay, commission pay, signing bonus) Referral bonus program Compensation: $18 - $32 / hour Primary Responsibilities: Job will require IC and Electric truck repairs Complete scheduled PM and repair assignments within the time frame allotted Track van inventory to meet PM schedule Perform routine forklift maintenance Use diagnostic tools to test forklift components Perform quality inspections Skills Required: The ability to work in all types of weather conditions The ability to stand and walk for long periods of time Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job Employee must be able to communicate effectively with management, customers, and other employees Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks Employee must be able to analyze information and write a diagnosis on work orders The ability to decipher different colors Must be able to work individually and as a team Qualifications: Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs Valid Driver's license with a good driving record Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Valid Driver's license with a good driving record Ability to lift 50 lbs. Willingness to learn Ability to thrive in a fast-paced environment Schedule: Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

JOB DESCRIPTION Job Title: JFK Station Mechanic Department: Maintenance Reports To: Outstation Line Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: Conduct Terminating Service maintenance checks per the KA General Maintenance Manual at least every 50 flight hours. Accomplish all required servicing of the aircraft including wheel and brake replacement, engine oil servicing, replacing burnt out light bulbs, wiping down struts, etc. Troubleshoot and repair defects discovered and complete all return to service paperwork completely and on a timely basis. Forward copies of repair information to Maintenance Control as work is completed. Perform other duties as directed by the GMM, Maintenance Control or his supervisor. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Also required is an A&P license and previous 747 experience is desirable. Tools required as well. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give verbal and written direction to assigned staff. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands and fingers to handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move more than 50 pounds, to eye level. Lift 10 pounds with each arm over your head Twist, turn with normal strength force Climb numerous flights of stairs Work on ladders, lifts and in some case high elevations Work in a squatted position Work in all weather conditions WORK ENVIRONMENT The work environment characteristics describe here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in a construction, maintenance setting. The noise level in the work environment is usually loud.

Job Description Start Time: 6:30 AM End Time: 3:00 PM Mechanic In Training - Water/Wastewater Treatment Facility At , we challenge what is currently accepted, so we can shape innovative and lasting solutions for tomorrow. Through the delivery of our operations and maintenance services, youll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empowering communities to focus on what matters most to them people. As a Mechanic-in-Training, youll join a collaborative team ensuring that our clients can deliver their services uninterrupted. Based at the North Hudson Sewerage Authority in Hoboken, New Jersey, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Here\'s What You\'ll Need: A valid drivers license with no major infractions Ideally, Youll Also Have: Experience in the maintenance of wastewater treatment plants and related equipment, or similar maintenance experience A valid Certified Maintenance & Reliability Technician (CMRT) certification or ability to obtain within 3 years of date of hire Experience in the use of Computerized Maintenance Management Systems (CMMS) Forklift experience Experience in serving municipal utility client Safe work practices Working Conditions & Physical Requirements: Safety is a core value at . We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services. Responsibilities: Comments/Special Instructions Candidate will work Monday-Friday 630-3PM (1/2 hr lunch and 15 min AM & PM break); once trained, will be required to be on the on-call rotating schedule and work overtime when required.

Job Description Are you a skilled technician who loves working on equipment and solving problems? Fraza & Vitan Equipment is looking for an experienced Forklift Technician to keep our customers' operations moving. You'll service, repair, and maintain forklifts and material handling equipment-no two days are the same. Why You'll Love It Here: Pay range $21-$33 an hour, based on experience and qualifications Weekly pay Company vehicle provided No weekends PTO, medical, dental, vision, pension Commission opportunities to boost your earnings What You'll Do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What You'll Need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Take the next step in your career-apply today! Powered by JazzHR TuFMbBl7ap

Welcome to uTest, by Applause. We are a company that helps businesses test the accuracy and usability of their websites, applications, and hardware through freelance software testing and feedback. You can get paid to help us shape the digital landscape! Description We are looking for individuals living in or near New York City, NYwho would be interested in participating on-site in testing exciting new digital wearable technology. Project Details: You will be wearing and using technology on your arms and hands that will control a device through movement and manual inputs Participants will be required to give feedback on their experience with the device through a survey The time commitment for testing is approximately3 hours Payout for this project is$150 Tester Requirements: Must be 18 years or older Must be willing to travel to designated data collection facility in New York, NY during normal business hours Must be proficient in spoken and written English Must have normal or close-to-normal hearing Must have normal vision OR able to wear vision-correcting glasses/contacts on the day(s) of the experiment Must have no history of epilepsy, seizures, or severe traumatic brain injury (i.e., concussion with nausea and/or memory loss) Must have no condition that impairs ability to grip or touch objects with hands and all 10 digits Must have no pre-existing conditions in the arms (which includes shoulder, arm, wrist, hand, fingers) such as tendinitis, existing or recurring pain, etc. You are not pregnant - We dont want to induce stress on neonates. Referral Bonus: We are offering a$25 bonus payoutif you refer a tester to participate who successfully completes the project! Be sure they know to provide your name and email that is affiliated with your uTest account during the application process. Please note: We require every tester to have a physical copy of a state / government issued Photo ID. Copies will not be accepted. If you arrive on site without a valid Photo ID (expired Photo ID's will not be accepted), you are ineligible to test and will be turned away without compensation. I f you require corrective lenses, please wear contacts if you have them available. Otherwise, bring your glasses with you on the day of your appointment. Covid-19 Statement: We know that COVID-19 is still impacting lives globally as countries take precautionary measures to slow the spread of the virus. The safety of our community of testers and our employees remains a priority for Applause. For more information on actions you should take regarding COVID-19 prevention, we encourage every tester to refer to local guidelines or the Centers for Disease Control and World Health Organization communications. #NewYorkRequiredPreferredJob Industries Computers & Technology

Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PM Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks) Performs repairs and assigned preventative maintenance services. Estimates time and material cost on vehicle repairs and requisition of new parts. Conduct safety checks on vehicles. Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time. Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports. Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards. This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts. Assists Sr. Technicians in the completion of project work. Requirements and Qualifications:: Applicants must be at least 18 years of age and legally eligible to work in the United States. A valid driver's license is required . CDL a plus. At least 5 years of experience in job duties. Sanitation or construction industry experience a plus. Computer diagnostic experience as diesel technician a plus. Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar. Working knowledge of applicable DOT and OSHA standards and regulations. Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. Must be able to meet the physical and safety requirements of the position. Must be able to provide own tools Work Environment We are continuously investing in equipment, and many of our trucks are less than 2 years old. Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings. Only during breakdowns will this position be required to enter transfer station loading/ dumping area. Personal Protective Equipment (PPE) will be provided. The Yellow Iron Diesel Technician/Mechanic may be required to lift upwards to 50 pounds. Frequent squatting and standing are required. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Mechanic Journeyman to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel and gasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Must have experience with trailers and tractors. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) - Preferred Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $39.25 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Aircraft Mechanic assigned to a foreign field site is responsible to the Off-Site Supervisor for performing duties as assigned. Frequently exercises independent judgment and possesses abilities sufficient to supervise a crew of aircraft mechanics. Work is performed under minimum supervision, and the employee consults with the supervisor only for the initial job assignment and where departures from standard practices are involved. ESSENTIAL DUTIES AND FUNCTIONS The essential functions include but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. Maintains Beech King Air B300 aircraft in support of aircrew missions. Launches and recovers aircraft, and performs required inspections to ensure airframe structure and powerplant serviceability. Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulics, engines, avionics, and electro-environmental systems. Advises management of deficiencies affecting aircraft airworthiness. Maintains aircraft support equipment inventory. Performs inspections, and accomplishes refurbishment and phase maintenance. Prepares and maintains aircraft maintenance records and historical documents. Monitors/reviews deficiency reports for adverse trends. Uses applicable OEM manuals when performing aircraft maintenance and troubleshooting aircraft. Performs in-progress and follow-up inspections to ensure quality of work. Researches, orders, and receives aircraft parts. Prepares parts for turn-in to the supply system. Initiates material reports as required. Maintains hand tools and special tools in safe and serviceable condition. Adhere to company tool accountability procedures. Reports unserviceable tools and equipment to appropriate parties. Annotates equipment/tools inspection and condition documents. Checks serviceability, and maintains and operates powered and non-powered support equipment. Complies with established policies, procedures, and standards. Complies with all safety, bioenvironmental, security, and housekeeping standards. Operates special purpose and regular vehicles as required. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Assists in researching and requisitioning aircraft parts and components and determining the reparability and serviceability of these assets. Monitors bench stock items and assists with and/or performs inventory inspections. Maintains supply discipline in the work center at all times. Actively participates in the Safety Program. Ensures HAZMAT processes are followed. Performs aircraft movements and FOD prevention walks on the flight line. Completes maintenance documentation using required forms. Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen, and nitrogen. Performs aircraft corrosion control procedures including washing, wiping down, polishing, and vacuuming. Performs aircraft, basic post-flight, and periodic/phase inspections. Operate and maintain GSE, flight line vehicles, and other support equipment as required. Discusses discrepancies with aircrews to obtain adequate troubleshooting information and data. Performs other job-related duties as assigned. Maintain strict compliance with company and government Communications Security (COMSEC) policies and procedures. EDUCATION and/or EXPERIENCE: High School diploma or GED equivalent required; two-year technical trade school, military experience, or equivalent on-the-job training is required Must hold a valid Airframe & Powerplant certificate issued by the Federal Aviation Administration (FAA) Must have a minimum of three years of hands-on experience as an A&P mechanic on small to medium fixed-wing and light & medium helicopters. Experience shall be in a similar position within the last twelve (12) months. Knowledge, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following are required: Demonstrated experience in maintenance support for various fixed-wing and rotor-wing aircraft (e.g., Cessna 206 & 208, Beechcraft King Air 300 series airplanes and Bell 407/412 helicopters) Demonstrated experience in maintenance support for medium cargo/commuter type aircraft (e.g., ATR 42, ATR 72 or Dash 8) Have tools required to complete a variety of maintenance tasks on aircraft listed in above paragraphs Knowledge of hand tools, power tools, machines, and equipment such as shears, sheet metal brake Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Install and operate rotor and propeller balancing equipment. (e.g. RADS, MicroVib, & Zing) Ability to retain information and make decisions according to standard policies and procedures Ability to determine work methods to accomplish assignments Working knowledge of applicable FAA Federal Aviation Regulations Ability to make proper entries in aircraft logs and records Obtain a DOJ Security Clearance as required Have and maintain a valid driver's license Must be a U.S. citizen PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an aircraft hangar the majority of the shift and is required to stand; walk, stoop, kneel, crouch, or crawl. The employee is frequently required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an aircraft hangar with good ventilation and airflow. Work may be regularly required in outside weather conditions where the employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays. Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Job Description MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck , Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: Union Pension Plan Medical, Dental, Vision benefits available Vacation Time Retirement Plan Opportunities Overtime Opportunities Competitive wages Supplemental Pay (bonus pay, commission pay, signing bonus) Referral bonus program Compensation: $18 - $32 / hour Primary Responsibilities: Job will require IC and Electric truck repairs Complete scheduled PM and repair assignments within the time frame allotted Track van inventory to meet PM schedule Perform routine forklift maintenance Use diagnostic tools to test forklift components Perform quality inspections Skills Required: The ability to work in all types of weather conditions The ability to stand and walk for long periods of time Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job Employee must be able to communicate effectively with management, customers, and other employees Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks Employee must be able to analyze information and write a diagnosis on work orders The ability to decipher different colors Must be able to work individually and as a team Qualifications: Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs Valid Driver's license with a good driving record Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Valid Driver's license with a good driving record Ability to lift 50 lbs. Willingness to learn Ability to thrive in a fast-paced environment Schedule: Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Are you a skilled technician who loves working on equipment and solving problems? Fraza & Vitan Equipment is looking for an experienced Forklift Technician to keep our customers' operations moving. You'll service, repair, and maintain forklifts and material handling equipment-no two days are the same. Why You'll Love It Here: Top pay based on experience Company vehicle provided No weekends PTO, medical, dental, vision, pension Commission opportunities to boost your earnings What You'll Do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What You'll Need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Take the next step in your career-apply today!