Mechanic jobs in Saint Cloud, FL - 1,258 jobs

Department: Utility Service Department Organizational Unit: County Water and Wastewater Position Type: Permanent Full Time/Part Time: Full Time Open Until Filled. $23.05 to $25.36 hourly. Actual salary negotiable based on experience and qualifications. Positions are available in the North, Central, and South areas of the County. Work schedule is shift work and includes evenings, weekends, holidays, and overtime as needed. Performs entry-level crafts and trades work participating in the daily operation, maintenance, and housekeeping typical of water treatment facilities. REQUIREMENTS: A high school diploma or its equivalent, as required by Florida Department of Environmental Protection (FDEP), PLUS one (1) year of experience assisting with or performing mechanical repair and routine maintenance on equipment, machinery, or mechanical systems in an industrial, utility, automotive, or similar setting. Additional college or technical coursework in subjects related to science or treatment plant operations is preferred. SPECIAL REQUIREMENTS: Must possess, or obtain prior to employment, a valid Florida driver's license and maintain said license during the term of employment. Must obtain within twelve (12) months of employment, the Florida Department of Environmental Protection (FDEP) Class C Wastewater Operator's license. May be required, depending upon area of assignment, to successfully complete an OSHA-compliant forklift operator training course which meets the requirements of CFR 1910.178 and be able to operate a forklift. Must be physically capable at all times of properly wearing and utilizing all required personal protective equipment (PPE), which may include respiratory protection. Must be able to work planned and unplanned overtime and standby and on call duties on a rotational basis, including nights, weekends, and holidays. In the event of a hurricane, major storm, natural or man-made disaster that may threaten the area, the employee will be required to perform emergency duties as directed. This position is part of an established career ladder. PHYSICAL REQUIREMENTS CHECKLIST (With or without reasonable accommodations) PHYSICAL ACTIVITIES / TRAITS The employee must be able to: LIFT:50 lbs. or more CARRY:50 lbs. or more PUSH:50 lbs. or more PULL:50 lbs. or more In an eight hour day, the employee may have to: STAND:5 - 8 hours WALK:5 - 8 hours SIT:5 - 8 hours DRIVE:5 - 8 hours The employee must repetitively perform: Fine manipulation (ex. writing, wiring); Operating foot controls; Pulling; Pushing; Simple grasping (ex. pen, screwdriver) The employee must be able to: Balance; Bend; Climb; Crawl; Dig; Jump; Kneel; Reach; Run; Smell; Stoop The employee must have: Color Perception; Good distant vision; Good hearing; Good near vision; Good speech; None; Use of both eyes Other necessary physical activities/traits N/A WORKING CONDITIONS Working conditionsthat will apply to the employee: Work alone; At heights above/below ground level; Below ground level (ditches, tunnels, etc.; In cold; In dampness or chilly conditions; In heat; In high humidity; In or with dusty conditions; In or with moving objects or vehicles; In or with noisy conditions; On or with ladders or scaffolding; On slippery or uneven walking surfaces; Other working conditions; With chemicals or solvents; With electricity; With feet, legs or hands in water; With fumes, smoke, gases or flames; With grease; With hazardous materials; With lawn grasses, plants, etc.; With odors; With oils; With poor lighting; With poor ventilation; With silica, fiberglass, etc.; With vibrations (jackhammers, etc.); Work inside; Work outside; Works Closely with Others Other working conditions: N/A

Bridgestone Retail Operations (BSRO) is part of Bridgestone Americas and employs over 22,000 teammates in North America. BSRO operates more than 2,200 company-owned stores, including Firestone Complete Auto Care, Tires Plus and Wheel Works locations. With locations across North America and more than $4.5 billion in tire and auto service sales, Bridgestone Retail Operations is the right place to build a career. Whatever role you fill, when you represent the Bridgestone name, you are a valued teammate, and part of our larger mission to Serve Society with Superior Quality. We start by offering each teammate more than just competitive pay. We provide formal training, performance incentives, paid vacation and holidays, competitive healthcare packages for full-time and part-time employees, and a 401k plan to help build towards your future. We believe people can only provide superior service and quality to others when they are allowed to bring their whole self to work and know they are supported. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of. Show us the smart stuff, the tough stuff, the bold, beautiful and brave stuff. Because who you are is what we need. **Job Category** Retail **Position Summary** The Automotive Technician plays a pivotal role within our automotive service team. As a vital member, you learn and develop foundational skills in diagnosing, repairing, and maintaining vehicles. Under the guidance of experienced technicians, this role involves hands-on learning to address various automotive systems and services. Automotive Technicians participate in routine inspections, contribute to vehicle assessments, and assist in repair procedures. Additionally, Automotive Technicians may interact with customers to explain repair procedures, answer inquiries, and provide exceptional service. Overall, this role demands a combination of mechanical aptitude, attention to detail, and a commitment to delivering high-quality workmanship in a fast-paced environment. This role offers a unique opportunity for individuals to build a solid foundation in automotive repair while contributing to the overall success of our team. Pay Range: $16.15 - $24.23 Our technicians enjoy a performance-based compensation model known as flat-rate pay. This system rewards our skilled professionals with a predetermined amount for each eligible task, fostering a culture of efficiency and swift task accomplishment, ensuring you're fairly rewarded for your expertise and dedication. These rates reflect average productivity by region. **Responsibilities** + Change oil and perform other scheduled maintenance services. + Perform inspections of steering, suspension, and brake systems. + Install batteries and check electrical systems. + Perform tire maintenance. + Install parts. + Road test vehicles. + Obtain or maintain A.S.E. certifications in at least one of A1 - A8 within first two years of employment (Tests and registrations fees are paid for by company pass or fail. Technicians receive bonus for each test passed) **Minimum Qualifications** + Ability to learn basic mechanical tasks. + Must have a valid automobile driver's license at all times and be able to drive customer and company vehicles. + Basic understanding of general automotive maintenance & tire repair services including: + Oil changes + Basic inspections + Repairing tires + Reading, writing, and math skills. **Preferred Qualifications** + 2 years of automotive repair experience, completion of Vocational-Technical School program in a related field or demonstrated skills via third party certificates/assessment. + A.S.E certification or equivalent external qualifications or training certifications. **OUR CREW KNOWS** **BENEFITS** + Medical, Dental and Vision - Starting day 1 for all our teammates + Paid vacation and holidays + On-the-job training and company-funded ASE certifications + Flexible work schedule + 401(k) match + On demand pay (daily pay) program available **OUR VALUES GIVE BACK TO** **YOU** + Professional Development: No matter where you're at in your career, we've got the resources to help you level up. + Community Involvement: We pride ourselves on working with our local communities and giving back where we can. + Integrity & Teamwork: Part of what makes our teams different is our drive to do things right, always, together. **At Bridgestone, you are Free to Be** We believe people can only provide superior service and quality to others when they bring their whole self to work. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of, because who you are is what we need. **What we offer** At Bridgestone, what really matters is to foster co-creation opportunities and empowering you to be creative and curious to make mobility safer, more efficient, and more sustainable for future generations. Whatever role you fill, when you represent Bridgestone, you are a valued teammate, and part of our larger mission to "Serve Society with Superior Quality", for that, we offer you more than just a competitive compensation; we will provide you: + A supportive and engaging onboarding experience to ensure a smooth transition into our team. + The opportunity to develop and grow, through training and regular mentorship. + Corporate Social Responsibility activities. + A truly global, dynamic and challenging work environment. + Agility and work/life effectiveness and your long-term well-being. + A diverse and inclusive team. _Bridgestone is proud to be an Equal Employment Opportunity employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law._ **Employment Eligibility** If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.

We are looking for aHeavy Equipment PM Techto join the team at JED Landfill in St Cloud, FL. Pay: $25+/hr DOE DUTIES AND RESPONSIBILITIES: Performs repairs and assigned preventive maintenance services. Performs inspections. Several pieces of yellow iron currently on site. (Compactors, Dozers, Excavators, Motor grader, Water truck and Articulated Dump Truck) Maintains a clean, safe work area in compliance with corporate and OSHA standards. WORKING CONDITIONS AND PHYSICAL EFFORT: Extensive physical activity. Requires strenuous physical work; heavy lifting, pushing, or pulling required of objects over 50 pounds. Work environment involves some exposure to hazards or physical risks, which require following basic safety precautions. Ability to operate heavy equipment is desired. Knowledge of light and heavy equipment operation and maintenance. MINIMUM JOB REQUIREMENTS: High school diploma or equivalent. Ability to read, writes, comprehend and communicate service and technical information. Minimum of3 to 5 years of experience that is directly related to the duties and responsibilities specified (both diesel and yellow iron experience). VETERAN are encourage to apply. WHAT WE OFFER: Excellent benefits including: medical, dental, vision, flexible spending account, long term disability, life insurance, 401K retirement and unlimited opportunities to "Connect with Your Future". Garbage is very stable and we work year round! If you have questions or need help with your application feel free to call the Pete Carreon at . #ACBoost #ACMaintenance Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status.

As a Factory Service Center Aircraft Maintenance Technician you will work from an assigned Factory Service Center performing aircraft scheduled and unscheduled maintenance, modifications and repairs along with a variety of diagnostic and mechanical duties as assigned. All work will be performed and documented in compliance with / reference to the appropriate technical data including manuals, standard operating procedures and regulations as required. Working conditions include occasional travel and semi - frequent face to face contact with Owners and Operators. Duties and Responsibilities/Essential Functions Adhere to Cirrus Aircraft Standard Operating Procedures Cirrus training requirements: Complete 100% Cirrus CBT Training (within 90 days) Complete 100% Cirrus University training (as directed) Complete 50% Core task list training (within 36 months) Complete 70% Cirrus & supplier Training (within 36 months) Comply with environmental health / safety policies and procedures Maintain the highest levels of professionalism in conduct and appearance while representing Cirrus Aircraft. Observe & maintain all requirements & criteria set forth by the Cirrus Part 145 Repair Station Manual. Read and understand maintenance manuals and other technical documents and identify repair procedure Perform mission critical repairs, troubleshooting & return to service work on AOG aircraft in the field IAW FAA regulations & all applicable technical data Review and research aircraft records Evaluate & interpret aircraft data Diagnose mechanical / electrical systems Utilize proper diagnostic / test equipment Inspect replacement aircraft parts for defects Replace defective parts using approved tooling Assemble aircraft components & perform required measurement and testing / adjustments Install / load system software and databases Inspect complete work for compliance and performance standards Assist, support and participate in Factory Service Center indirect activities such as moving aircraft, shop projects, and continuous improvement projects as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Education Requirement(s): High school diploma or GED FAAST Bronze or better preferred Experience Requirement(s): 4 years' proven aircraft maintenance experience Certification Requirement(s): Must have CFR part 65 Certification - Repairmen or A&P Cirrus Inspection Authorization (Within 18 months) License Requirement(s): FAA Airframe & Powerplant Valid State Drivers License Ability to obtain an Airport Security Badge Competencies To perform the job successfully, an individual should demonstrate the following competencies: Ensures Accountability: Holds self and others accountable to meet commitments. Plans and aligns - Plans and prioritizes work to meet commitments aligned with the organizational goals Instills Trust: Gains the confidence and trust of others through honesty, integrity and authenticity. Ensure Exceptional Customer Service: Energizes the Cirrus Services Essentials Other Duties Cirrus provides a range of exciting benefits, including: 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. Employer-Paid Coverages: Group term life, short- and long-term disability insurance. Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. Free Health Tracking: With rewards for meeting health goals. Generous PTO: 100 + hours accrued within the first year. Employee Referral Bonus: For referring talented candidates. Career Development: Tuition reimbursement and professional growth opportunities. Exclusive Discounts: Access to partner and marketplace discounts. Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus! Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus Aircraft's Mission is to deliver an aviation experience that is the pinnacle of innovation, quality, and safety to our customers. Cirrus Aircraft is the recognized global leader in personal aviation and the maker of the best-selling SR Series piston aircraft and the Vision Jet™, the world's first single engine Personal Jet and recipient of the 2017 Robert J. Collier Trophy. Founded in 1984, the company has redefined performance, comfort and safety in aviation with innovations like the Cirrus Airframe Parachute System (CAPS ) - the first FAA-certified whole-airframe parachute safety system included as standard equipment on an aircraft. To date, worldwide flight time on Cirrus aircraft has passed nine million hours and over 250 people have returned home safely to their families as a result of the inclusion of CAPS as a standard feature on all Cirrus aircraft. Find out more at cirrusaircraft.com. Cirrus offers a competitive benefits package and is dedicated to the advancement of general aviation. The Cirrus Flying Club offers employees and their family members the unique opportunity to obtain their private pilot's license in the comfort of a Cirrus or rent a Cirrus for an impromptu adventure at a greatly reduced rate. We are committed to investing in the future of our employees and company by offering professional development and career progression opportunities and we engage employees by offering several employee and family events throughout the year, as well as the opportunity to take part in activity clubs and community events. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

OUC - The Reliable One, is presently seeking a CDL Licensed Fleet Technician to join our Fleet division. At OUC, we don't just work - we're building a bright future of innovation and transformation for future generations. We are looking for a skilled automotive mechanic with welding and fabrication, and hydraulics experience to perform repair and preventative maintenance for OUC fleet vehicles and equipment. This will include but not be limited to gasoline and diesel engine maintenance and repair, general welding, paint and bodywork, transporting equipment, and small engine repair. In this role, you will be continuously learning to repair OUC vehicles with high proficiency in the progression toward achieving Master Technician status. OUC's mission is to provide exceptional value to our customers and community by delivering sustainable, reliable services and solutions. Click here to learn more about what we do. The ideal candidate will have: High School Diploma/GED A minimum of three (3) years of mechanical experience in related automotive and equipment repair and general maintenance; OR Completion of a technical school certificate program in automotive and/or diesel maintenance AND a minimum of one (1) year of mechanical experience in related automotive and equipment repair and general maintenance Welding and fabrication, hydraulics experience (Preferred) ASE A7 Heating & Air Conditioning or ASE T7 HVAC Systems (Preferred) Florida Class A CDL with Hazmat and Tanker endorsements (Must be able to obtain and maintain within six (6) months of hire Valid Driver's license OUC offers a very competitive compensation and benefits package. Our Total Rewards package includes: Competitive compensation Low-cost medical, dental, and vision benefits and paid life insurance premiums with no probationary period OUC's Hybrid Retirement Plan includes a fully funded cash balance account, a defined contribution 401(a) with employer matching, along with a retiree health reimbursement account Generous vacation, holidays, sick time, and paid parental leave Educational Assistance Program, to include tuition reimbursement, paid memberships in professional associations, paid conference and training opportunities Wellness incentives and free access to all on-site OUC fitness facilities Access to family-oriented recreational areas Free downtown parking Click here to view our Benefits Summary. Salary Range: Starting at $26.748 per hour (Estimated $55,635.84 annually) with a structured step progression system and performance-based pay increases every 6 months up to $36.907 (Estimated $76,766.56 annually) Location: 3800 Gardenia Ave. Orlando, FL 32839 Please see below a complete Job description for this position. Job Purpose: Performs skilled automotive mechanic work, being proficient in the repair and preventative maintenance of vehicles. Continuously learns to repair OUC vehicles with high proficiency in progression towards achieving Master Technician status. Involves general automotive and equipment repairs with a strong emphasis on preventive maintenance procedures. Assignments will include, but are not limited to gasoline and diesel engine maintenance and repair, general welding, paint and body work, transporting equipment and small engine repair. Primary Functions: Perform preventive maintenance on vehicles/equipment under general guidance until proven capability; Transport fleet vehicles, fuel, and equipment; Repair Passenger cars, trucks, and equipment tires; Perform mechanical repairs to gasoline and diesel engines; Perform general repairs to electrical systems; Troubleshoot through the use of diagnostic testing equipment; Re-fuel and wash vehicles; Perform mechanical repairs to air and hydraulic brake systems; Learn and perform hydraulic repairs to vehicle/equipment under general guidance until proven capability; Perform air conditioning trouble shooting, servicing and repair; Perform small engine servicing and repair; Perform general welding and minor fabrication; Perform basic paint and body repair; Participate in Fleet Training Program and strive to complete required sign-off tasks in accordance with the Fleet Training Program agreement; Perform other duties as assigned. Technical Requirements: Working knowledge of all, but not limited to the following: Mechanics and vehicle repair/maintenance; Gasoline and diesel engines; Hydraulic systems (preferred); Basic welding; Tire repair; Small engine repairs; Minor paint and body repair; Computer skills to access vehicle repair information are required. Ability to: Follow instructions, working as a team member as well as independently; Maintain ASE certification requirements; Use related computer systems to access vehicle repair information; Use Microsoft Office Suite (Word, Excel, Outlook, etc.) and standard office equipment (telephone, computer, copier, etc.). Education/ Certification/Years of Experience Requirements: High School Diploma or GED AND a minimum of three (3) years of mechanical experience in related automotive and equipment repair and general maintenance; OR Completion of a technical school certificate program in automotive and/or diesel maintenance AND a minimum of one (1) year of mechanical experience in related automotive and equipment repair and general maintenance; Welding and fabrication, hydraulics experience (Preferred); Must have the ability to obtain and maintain the following certifications within ninety (90) days of hire: ASE A7 Heating & Air Conditioning OR ASE T7 HVAC Systems Must be able to obtain and maintain the following licensing within six (6) months of hire: Florida Class A CDL with Hazmat and Tanker endorsements. Working Conditions: This job involves frequent exposure to chemicals and excessive noise. This job may involve occasional exposure to noxious fumes and rare exposure to extreme weather and insects. Physical Requirements: This job requires standing and walking, frequent lifting of up to 50lbs, climbing, speaking & hearing, detailed inspection/reading, writing, and may involve frequent driving of a company car. This job may require occasional sitting. OUC-The Reliable One is an Equal Opportunity Employer who is committed through responsible management policies to recruit, hire, promote, train, transfer, compensate, and administer all other personnel actions without regard to race, color, ethnicity, national origin, age, religion, disability, marital status, gender, sexual orientation, gender identity or expression, genetic information and any other factor prohibited under applicable federal, state, and local civil rights laws, rules, and regulations. EOE M/F/Vets/Disabled

At Disney, we're storytellers. We make the impossible, possible. We do this through applying and developing innovative technology and opening up the boundaries to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our dedicated team that delivers unparalleled creative content to audiences around the world. The Laundry System Mechanic is more than just a modern-day technician. They are responsible for repairing, modification, and rebuilding of all laundry system equipment. Laundry System Mechanics must have strong working knowledge of electrical and electronic laundry devices and along with troubleshooting the equipment. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $41.06 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ****************************************

BETTER MOBILITY FOR LIFE Savaria is a global leader in accessibility and patient care products, designing and building wheelchair lifts, stairlifts, elevators for home and commercial applications, medical beds, therapeutic surfaces, ceiling track lifts and patient slings. Savaria employs 2,450 valued associates globally and has 11+ manufacturing facilities to reach markets in North America, Europe, Australia, and Asia. OVERVIEW: The Elevator Mechanic is responsible for installing, repairing and maintaining elevators in commercial and residential buildings. In addition, they will inspect elevator systems and identify issues and troubleshoot and resolve mechanical and electrical problems. Florida Lifts is one of the top residential elevator and accessibility companies in the USA. Based in beautiful Palm Beach County Florida and sell, install and service residential elevators, wheelchair lifts, LULA elevators, dumbwaiters, material lifts and stairlifts from Orlando to Tampa to the Florida Keys. Essential Duties and Responsibilities: Ensure all installation work is completed per job requirements Ensure all safety procedures are followed during installation Read and interpret schematics and blueprints Provide excellent customer service while on-site Conduct field service visits to ensure elevator functionality Perform regular maintenance tasks to keep elevators in optimal condition Ensures jobsite is neat and clean Works with inspectors to ensure work passes all required inspections SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. COMPETENCIES: Strong interpersonal skills with an ability to interact with customers on a positive basis Reliable and punctual Ability to multi-task Organized and structured LANGUAGE SKILLS: Ability to read, analyze and interpret documents such as safety rules, operating and maintenance instructions, dimensional drawings/specifications and procedural manuals. Ability to write reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. EDUCATION, EXPERIENCE & TRAINING: High School diploma or GED Minimum of 4 years of experience installing residential elevators, wheelchair lifts and LULA elevators Knowledge of ASME A17.1 and A18.1 Ability to read and understand installation blueprints and drawings including all electrical and electronic schematics and knowledge with a focus on industrial mechanics CERTIFICATES, LICENSES OR REGISTRATIONS: Certified Elevator Mechanic License COMPUTER SKILLS: Basic skills in Microsoft Word, Excel, PowerPoint, and Outlook PHYSICAL DEMANDS: The employee must be able to lift heavy loads WORK ENVIRONMENT: This position works in an environment with moderate noise levels. TRAVEL: Some overnight travel and must have a valid driver's license and clean driving record - Company vehicle provided Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Critical features of this job are described under various headings above. They may change at any time due to reasonable accommodations or other reasons. The above statements are strictly intended to describe the general nature and level of the work being performed. They are to not be construed as a complete list of all responsibilities, duties and skills requires of employees in this position. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Savaria provides equal employment opportunities and consideration to all qualified employees and applicants, including disabled individuals and veterans.

+ While working on-site in Wichita, KS, perform development and installation of hydraulic, electrical, fuel, and airframe components for military aircraft, including drones and stealth aircraft + Complete routing and installation of hydraulic/fuel lines and wiring + Complete sealing of aircraft structures and components + Complete testing and initial inspection of components, performing rework as necessary + Other duties may be assigned + Maintain your Active Secret Clearance and receive special program clearance **Requirements:** + Active Secret Clearance - we cannot consider candidates that don't currently possess an Active Secret Clearance + 2+ years of systems and/or structures installation in the production of aircraft or spacecraft + Tools are NOT required **Pay:** + $45/hr + Per Diem is available **Work Schedule:** + Must be flexible on shift (primarily 1 st and 2 nd shift) + Must be open to OT, including some mandatory Saturdays **Placement:** + 12+ month Contract, with strong potential for extension + We have current contractors that have been out there over 3 years at this point + There will be opportunities to go direct if you're interested, normally around the 6-month mark ****This position is in Wichita, KS**** **Job Type & Location** This is a Contract position based out of Melbourne, FL. **Pay and Benefits** The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Melbourne,FL. **Application Deadline** This position is anticipated to close on Jan 16, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Why Work for Frontier Airlines? At Frontier, we believe the skies should be for everyone. We deliver on this promise through our commitment to Low Fares Done Right. This is more than our tagline - it's our driving philosophy. Every member of Team Frontier has an important role to play in bringing this vision to life. Our successful business model allows travelers to take advantage of our fast-growing route network while our bundled and unbundled pricing options allow our customers to personalize their travel experience and only pay for the services they need - saving them money along the way. What We Stand For Low Fares Done Right is our mission and we strive to bring it to life every day. Our ‘Done Right' promise means delivering not only affordable prices, but making travel friendly and easy for our customers. To do this, we put a great deal of care into every decision and action we take. We must be efficient with the use of our resources and make smart decisions about how we run our business. We must also innovate and be pioneers - we're not afraid to try new things. While our business requires us to fly high in the air, we also consider ourselves down-to-earth in our approach, creating a warm and friendly experience that truly demonstrates Rocky Mountain Hospitality. Work Perks At Frontier, we like to think we're creating something very special for our team members. Work is why we're here, but the perks are nice too: Flight benefits for you and your family to fly on Frontier Airlines. Buddy passes for your friends so they can experience what makes us so great. Discounts throughout the travel industry on hotels, car rentals, cruises and vacation packages. Discounts on cell phone plans, movie tickets, restaurants, luggage and over 2,000 other vendors. Enjoy a ‘Dress for your Day' business casual environment. Flexible work schedules that support work/life balance. Total Rewards program including a competitive base salary, short term incentives, long-term incentives, paid holidays, 401(k) plan, vacation/sick time and medical/dental/vision insurance that begins the 1 st of the month following your hire date. We play our part to make a difference. The HOPE League, Frontier Airlines' non-profit organization, is dedicated to providing employees financial assistance during catastrophic hardship. Who We Are Frontier Airlines is a leading ultra-low cost carrier headquartered in Denver, Colorado. With a mission to deliver Low Fares Done Right, the company provides affordable, convenient and accessible air travel throughout the U.S., Caribbean, Mexico and Latin America. Frontier's highly fuel-efficient, all-Airbus fleet is among the youngest and most modern of any carrier within the U.S. That, combined with the airline's many weight-saving initiatives and focus on operational efficiencies, makes Frontier America's Greenest Airline.* Each Frontier Airlines plane tail features a special animal with a unique name and backstory. Many of the featured species are endangered or threatened, part of the airline's commitment to underscore and raise awareness for their plight. Frontier serves approximately 100 destinations throughout North America and operates 500-plus daily flights, on average. The airline employs more than 7,000 team members and has crew bases in more than a dozen U.S. cities. Frontier Airlines., Inc., is a subsidiary of Frontier Group Holdings, Inc. (NASDAQ: ULCC). * Frontier is the most fuel-efficient of all major U.S. carriers when measured by ASMs per fuel gallon consumed. What Will You Be Doing? The aircraft mechanic is responsible for performing various maintenance functions on company aircraft in accordance with all company policies and procedures as well as all federal aviation regulations. Essential Functions Perform and assist approved work by their leads within the scheduled shift. Ensure completeness of all assigned work documents and records. Seek on-the-job training during work shift to ensure proper qualification standards are met and maintained. Coordinate all activities with lead mechanic in charge or station supervisor. Research all pertinent information and material for work scheduled on aircraft. Maintain cleanliness of maintenance areas at all times. Ensure a “clean as you go” job ethic is adhered to. Ensure that all maintenance areas meet good “housekeeping” standards. Ensure that all tools (both personal and company owned) are removed from the aircraft, aircraft engines, appliances, and components. Always maintain positive tool control accountability. Immediately report lost and/or found tools to management. Follow all rules and regulations in order to maintain a safe working environment for all employees. Research all pertinent information and material for work scheduled on aircraft. Input necessary data into the maintenance tracking software systems. Enter completed work into maintenance tracking software systems. Perform other duties as assigned. Comply with and implement the necessary procedures in the MEL/CDL/NEF Program. Monitor the proper completion of aircraft records (e.g., logbook pages, work cards, non-routines, engineering documents [EOs, EAs, etc.], and other related documents). Ensure accuracy and completeness of all assigned work documents and records. Make FMIS entries as required. Vol. D Maintain familiarization with the training requirements necessary as defined in the GMM 100: Maintenance Training Program and ensure training is current prior to performing the functions and tasks of this position. Perform other duties as assigned. Always follow (never deviate from) approved published procedures unless proper deviation is authorized. Additional responsibilities, as follows, by job qualification area: Interior Crew - remove, repair, and reinstall aircraft interiors including seats, galleys, lavatories, sidewalls, ceilings, flooring, etc. Qualifications FAA certificated mechanic with Airframe and Powerplant ratings Requires two (2) years of experience performing maintenance in the following areas on A320 series or large similar type aircraft: maintenance checks, engine changes, gear changes, structural repairs, flight control rigging, component maintenance on A320 serious aircraft or on larger similar type aircraft or successful completion of accredited A&P mechanic training course. When directed by management, must obtain taxi and run-up qualification on all aircraft types within six months of assignment in Line Maintenance Qualification by Job Qualification Area - Interior Crew Mechanic FAA certificated mechanic with Airframe rating Requires two (2) years of experience performing maintenance in one or more of the following areas on A320 series or large similar type aircraft: maintenance checks, engine changes, landing gear replacement, structural repairs, flight control rigging, component maintenance on A320 series aircraft or on large similar type aircraft or successful completion of accredited A&P mechanic training course When directed by management, must obtain taxi and run-up qualification on all aircraft types within six months of assignment in Line Maintenance Must have ability to complete differences training Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company Must have the ability to plan, organize, and administrate workloads to subordinates Position requires extremely strenuous physical work involving objects in excess of 100 lbs. occasionally, and in excess of 50 lbs. frequently Work Sponsorship We sponsor eligible candidates under the requirements of U.S. TN visas for candidates who are nationals of Canada and Mexico. Knowledge, Skills and Abilities Must have ability to complete differences training Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company Compensation Base Rate : $29.39 per hr. increases to $29.90 per hr. after 90 days Additional Premiums: $1.20 A License $1.20 P License $1.00 Run/Taxi Qualified after training $1.00 Graveyard Shift $.75 3 yrs Airbus exp. and Gen Fam certified or after training $.75 3 yrs Airbus exp. and Troubleshooting certified or after training Please note: this is an evergreen posting that will remain open. Workplace Policies Disclaimer: The above statements are intended only to describe the general nature and level of work required of the referenced position; they are not intended to be an exhaustive list of all responsibilities, duties, and skills required of individuals in this position. Please be advised that duties and expectations of this position may be subject to change. Frontier Airlines, Inc. is an equal opportunity employer and, as such, is committed to providing equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, national origin, age, marital status, veteran status, sexual orientation, gender identity or expression, disability status, pregnancy, genetic information, citizenship status or any other basis protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Frontier Airlines is a Zero Tolerance Drug-Free Workplace. All prospective employees are subject to pre-employment testing for the following drugs and their metabolites: Marijuana, Cocaine, Amphetamines, Opioids and Phencyclidine (PCP). Further, any applicant who is found to have tested positive on any required drug or alcohol test at a former employer will be considered ineligible for employment with Frontier. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

Maintenance on airboats Changing oil Small repairs like starters, alternators, radiaters, hoses,belts, and etc Tightening bolts Washing boats Inventory on parts Assisting head mechanic with big repairs such as Motor swaps Also maintains and cleans dock area Pay would start at $27 per hour

Job Description Are you a versatile mechanic with a passion for problem-solving on a wide range of equipment-from forklifts to skid steers and more? AAA Forklifts in Orlando, FL is looking for a full-time Lead Mobile Equipment Technician - Master Mechanic who wants to break out of the shop, take the lead in the field, and work on diverse equipment every day! WHY YOU SHOULD JOIN US With competitive pay ranging from $32 - $40/hour plus commission, fantastic benefits like a take-home company vehicle, paid tolls and gas, and even a $1,000 tool financing program, this is your chance to work in a role where you're valued and rewarded. We also offer generous benefits and perks such as: Commission structure Health, dental, and vision A 401(k) with a 3.5% match Paid time off (PTO) 6 paid holidays Flexible scheduling ABOUT US As the one-stop-shop for everything material-handling related, we offer a wide range of services including repair and maintenance to buying, trading, and selling! It's not just a job here - it's a place where every team member genuinely enjoys coming to work. Our upbeat company culture fosters a supportive environment where we have a good time while understanding the importance of getting the job done right. From day one, we welcome our employees with open arms, emphasizing our commitment to their growth and well-being. With an open-door policy and a focus on being employee-centric, we ensure that everyone's voice is heard and respected! ARE YOU THE LEADER OUR TEAM NEEDS? We're looking for a Lead Mobile Equipment Technician - Master Mechanic who meets the following qualifications: 5+ years of experience as a mechanic or equipment technician Hydraulic or diesel experience Ability to provide your own tools Clean driving record Having these would be a plus: 10+ years of mechanical repair experience across various equipment types (e.g., forklifts, skid steers, loaders) Construction or industrial equipment mechanic experience Ability to read and follow electrical diagrams or schematics Experience in manual troubleshooting (no computers or code readers) WHAT VITAL ASSISTANCE DO YOU PROVIDE? You'll have the luxury of working Monday through Friday, 7:00 AM to 5:00 PM, which means you can enjoy your weekends off while still keeping a steady, full-time routine. No crazy shifts or late nights-just a balanced work-life schedule you can count on. Every day as a Lead Mobile Equipment Technician - Master Mechanic is different and exciting! You'll respond to field service calls across Orlando, using your skills to diagnose and repair a variety of equipment. From diagnosing mechanical and electrical issues to making sure everything's running smoothly, you'll be the go-to expert our customers rely on. And with your take-home company vehicle, you'll have everything you need to stay organized and tackle service calls. Plus, you'll get to interact with our customers, delivering friendly, top-notch service and building relationships that keep them coming back. ADVANCE YOUR CAREER TODAY! If this sounds like the perfect next step in your career, we'd love to have you as our Lead Mobile Equipment Technician - Master Mechanic! Take just 3 minutes to fill out our mobile-friendly application and get started. Don't wait-join the AAA Forklifts team today and let's drive your career to new heights! Job Posted by ApplicantPro

Meridian Mechanical Services, LLC. is currently looking to fill a position within our team. Meridian currently manages all types of Commercial HVAC/R, Plumbing, Gas and Pipe service work. We are looking for a team member who is well versed in Sheetmetal mechanics. At Meridian we believe in providing a family-oriented career for our team members and doing the absolute best we can to excel in the industry. If you are a Sheetmetal Mechanic and are looking for a growing, professional company apply for this position now. Meridian Mechanical's Office is located in Cocoa, FL. This position will report to specific job sites in and around Central, East, and West Florida as required. Sheetmetal Job Responsibilities: Install, HVAC mechanical systems, and equipment in commercial structures. Collaborate with general contractors, electricians, and other construction professionals. Follow building plans and specifications. Ability to review and identify required materials to complete specific tasks Understanding of OSHA requirements and processes Enforce safety procedures Train and mentor new employees [Benefits Work Hours] Full Benefits suite offering: Health Plans, Dental Plans, Vision Plans, Free Short-Term Disability, Company paid Life Insurance, Paid Training, Paid time off, 401K with Company match after 1-year. The hours are 7:00A.M. to 3:30P.M. Monday through Friday with overtime opportunities available based on individual project demands. Sheetmetal Qualifications / Skills: Skilled in the use of hand and power tools used in the Sheetmetal trade Knowledge of building codes, safety regulations, and safety practices Ability to read and follow blueprints and rough drawings Familiarity with general Sheetmetal practices and SMACNA Effective communication and personable skills Ability to complete projects unsupervised and unassisted Excellent problem solving skills Attention to detail and ability to perform multiple tasks simultaneously Proficiency in basic mathematics and conversion of measurements Ability to manage field personnel Strong leadership skills with the ability to lead crews to complete tasks in line with project schedule Education and Experience Requirements: High school diploma or GED certificate (preferred) 1-3 years' experience in the Sheetmetal trade (preferred) Valid driver's license and transportation Must have own tools (personal hand tools) Must be able to be able to speak English

Westbrook Vision To be a thriving company that makes a lasting impact in Central Florida for generations to come. Westbrook Mission To create an employee experience so profoundly different that it leads to changed lives and customers for life. Job Type: Full-time Pay: $20.00 - $34.00 per hour Schedule: Monday to Friday - 8-hour shifts with overtime available. Day shifts, some projects may require evening shift. (Weekends as needed scheduled with notice) Employee Benefits: Health Insurance - 87% Paid by the Company (Employee Plans starting at less than $23 per week) Paid Time Off (PTO) Paid Holidays per year - 8 Paid Sick days per year - 3 (Paid out yearly if not used) Paid Hurricane Days - 3 Paid Paternity/Maternity Leave Paid Life Insurance Paid Dental Premiums Paid Long-Term Disability Insurance Gas Stipend - $5 per day 401K Match - Plan Increasing up to 7½% Vision insurance and Free Prescription Safety Glasses Gym Membership Reimbursement Free Annual Premium Brand Work Boots Fun Team building Outings (Universal, Top Golf, and Andretti) AND MORE! Company-Funded Education Opportunities: NCCER Nationally Accredited Apprenticeship Certification Program (Pipe) Manufactures' training Language - Spanish and English Health and Wealth Education Emotional Intelligence, Leadership and Advancement Training Key Responsibilities of the Pipefitter Mechanic include: Reads blueprints, specifications, and work orders to assess work required. Makes calculations and uses measuring devices for layout work. Determines installation and repair methods based on blueprints, specifications, and work orders Removes damaged, defective or obsolete pipes and pipe systems Uses tools to measure, cut, bend, and thread lengths of pipe and to install and repair pipe systems Inspects and tests installed systems and equipment to ensure proper working order, detect and repair leakages, and to ensure compliance with safety and municipal standards. Installs, cleans and replaces tanks, safety valves, air vents, pipe traps, pressure gauges, gaskets, filters, and fittings. Operates specialized equipment and tools (e.g., cutters, hacksaws, torches, threaders) to cut, weld, solder, braze, and thread pipes to specification Follow all safety protocols and regulations Qualified candidates will have: High School Diploma or G.E.D. (Preferred) 2 years minimum of experience as a Pipefitter mechanic or Jr Mechanic. Proficient in reading and interpreting blueprints. Strong problem-solving and critical thinking skills Ability to work independently and as part of a team Must have a valid driver's license (Please note if you do not meet the qualifications above, please see our job posting for Pipefitter Apprentice) We are a Drug Free Workplace and Equal Opportunity Employer. Our employee selection process includes the following: drug testing, background check, driving record check, pre-employment assessments, and reference interviews with previous employers.

Experienced A&P Mechanic (Various Shifts) - Orlando, FL(Job Number: 338520) Textron Aviation has been inspiring the journey of flight for nine decades through the iconic and beloved Cessna and Beechcraft brands. We are passionate advocates of aviation, empowering people with the freedom of flight. As you join our legacy as a global leader in private aviation, you'll have opportunities to try new fields, expand your skills and knowledge, stretch your abilities, and build your career. We provide a competitive and extensive total rewards package that includes pay and innovative benefits to support you and your family members - now and in the future, beginning day one. Your success is our success.Description We are hiring immediately for a full time A&P (Airframe & Powerplant) mechanic or AMT (Aircraft Maintenance Technician). This role is critical to our mission, so we are offering up to a $15,000 Sign On Bonus. What you will be doing as an A & P Mechanic: You can expect to conduct thorough inspections, maintenance, modifications, and repairs on Cessna and Beechcraft aircraft models. Your responsibilities may include (but are not limited to): Mechanical Duties: Perform a variety of mechanical tasks on various aircraft models, including diagnosing malfunctions, disassembly, rework, repair, replacement, reassembly, and adjustment of aircraft systems to prepare for flight and delivery. Engine and Airframe Maintenance: Perform troubleshooting, inspection, and repair of turbine engines, including engine run-ups. Carry out airframe system and component changes, systems checkout, and install service bulletins and kits on both airframes and engines. Use of Tools and Equipment: Utilize equipment such as tensiometers, micrometers, pressure gauges, dial gauges, vacuum gauges, timing lights, and various hand tools to repair or modify systems or assemblies. Qualifications What you need to be successful: High school education or GED required A&P License Required Knowledge of 100-hour, annual, and progressive inspection procedures as per FAR 43 is required. A minimum of 2 years experience with varied jet, turboprop, piston, modification, aircraft/flight maintenance Why join us? Your success is our success. We provide a competitive and extensive total rewards package that includes pay and innovative benefits to help you and your family members - now and in the future, beginning day one. 401K company match + additional annual contribution equal to 4% of eligible compensation Education assistance for undergraduate, graduate, and certificate programs, compensated at the start of the semester Flight training bonus program for earning pilot certifications Fertility and adoption assistance Free financial consultations and guidance And so much more The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. This role is eligible for up to a $15,000 (pre-tax) sign-on bonus based on level of experience. Terms & conditions apply. The Company reserves the right to amend or suspend this program at any time. EEO StatementTextron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law. Preference given to Veterans of the U. S. Armed Forces. Recruiting Company: Textron AviationPrimary Location: US-Florida-OrlandoSchedule: Full-time Job Level: Individual ContributorShift: First ShiftJob Posting: 01/05/2026, 3:50:08 PM

Ready to dive into an exciting, one-of-a-kind opportunity? When it comes to your work, do you want to do more than just get your feet wet? At our water park, you'll play a key role in helping us deliver a memorable and positive experience for our guests. If you're passionate, positive and hard-working, wed love to have you join our team! What you get to do: * Perform filter, pump, valve, and piping maintenance and repairs. * Recognize normal system/equipment operations, required action, and notification, plus involvement in preventative maintenance programs. * Perform all basic tasks as related to the maintenance of the saltwater and freshwater systems. * Perform water chemistry testing and understand results as it pertains to all systems. * Maintain record of activities performed during shift. * Perform and assist with general maintenance of park facilities. * Comply with all department and corporate safety guidelines and procedures. * Practice safe work habits, including the use of personal protective equipment. * Maintain highest standards of work area cleanliness both in the life support systems and display areas. * Communicate professionally and effectively with Ambassadors, Vendors, and our Guests. * Perform other duties as assigned. What it takes to succeed * Must be at least 18 years of age. * High school diploma or equivalent. * Valid driver's license. * Ability to obtain Certified Pool Operator or Aquatic Facility Operator certification. * Have knowledge and experience of basic mechanics or previous experience as a Filtration Mechanic. * At least 1-year operational experience in an aquatic life support facility or other water treatment facility. * Knowledge of water analysis and the ability to make the necessary adjustments to maintain water balance. * Understanding of the operation, troubleshooting, maintenance and repair of various types of pumps and related equipment. * Ability to assess scope of work for a job, develop list of materials, parts, and equipment, etc. * Experienced in the use and care of all basic hand tools and specialty tools. * Ability to interpret piping system layouts, make up and glue all types of PVC pipe. * Ability to complete all legal, company and department training requirements. * Have excellent written and verbal communication skills * Able to complete provided CPR training/certification * Able to stand for long periods of time * Able to lift, push and pull 80 pounds * Have basic math skills * Be available to work varying shifts or hours based on park hours; i.e. be able to work opening and closing shifts What else is important: * Able to frequently lift, push, and pull a minimum of 50 lbs. * Position engages in extensive walking and standing throughout entire work shift and climb/ascend heights. * Perform the following physical activities: kneeling, bending, squatting, bend floor-to waist/waist-to-overhead, reach overhead, simple grasp and fine hand manipulation tasks (use of tools/keyboard/writing) * Must be able to work indoors and outdoors, in varying weather, to include extreme heat. Position may be exposed to noise, vibrations, and motion fumes, dust, odors, and cold/heat temperature extremes. * Perform cleaning duties, including use of cleaning chemicals. * Work a flexible schedule / hours based on business need, to include opening, mid, and closing shifts, nights, weekends, and holidays. * Must be comfortable working around chemicals. * Must be able to work in/around water. * Must be flexible in work locations as placement will depend on business needs and career development opportunities. The perks of the position: * Paid Time Off * Complimentary Park Tickets and Passes * Park Discounts on Food and Merchandise * Medical, Dental, and Vision Insurance * 401K Retirement plan * Voluntary Insurance * Life Insurance * Disability Benefits * Tuition Reimbursement * Dependent and Health Care Flexible Spending Accounts * Employee Assistance Program * Legal Assistance Plan EEO Employer: SEAWORLD PARKS & ENTERTAINMENT IS AN EQUAL OPPORTUNITY EMPLOYER. ALL APPLICANTS WILL BE CONSIDERED WITHOUT REGARD TO AGE, RACE, COLOR, RELIGION, SEX, NATIONAL ORIGIN, SEXUAL ORIENTATION, PREGNANCY, GENDER IDENTITY OR EXPRESSION, DISABILITY OR COVERED VETERAN STATUS.

Please call/text Marie Ferrigno at ************** to discuss opportunity in further detail and/or send resume to ****************** HSGI, Inc. has IMMEDIATE Airframe & Powerplant Mechanic positions available! The Aircraft Maintenance Technician reports directly to the Crew Chief for task assignments and is responsible for the timely and efficient completion of all assigned duties. The A&P Mechanic carries out tasks in accordance with work scope requirements, adhering to established quality standards and utilizing the appropriate technical documentation. Responsibilities include, but are not limited to, maintenance and inspection, servicing and lubrication, troubleshooting, repairs and modifications, as well as fueling and de-fueling operations. Experience on Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Lear Jet, Challenger, Global Express, Hawker Beechcraft, Embraer, etc., would be a plus and an immediate hire! For immediate consideration, call/text Marie Ferrigno at ************** and email your resume to ****************** Very Urgent Job Opportunity! Serious and experienced A&P Mechanic with Airframe & Powerplant License. Lear Jet, Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Hawker Beechcraft, Embraer, etc. Aircraft Mechanics! DUTIES & RESPONSIBILITIES: Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures Communicate as required to receive and understand work assignments Perform complex aircraft inspections, repairs, and modifications with minimal supervision Coordinate with other departments as needed to ensure compliance with internal and FAA inspection and documentation requirements Properly complete work order sign-offs and other paperwork in a timely and accurate manner. Ensure that all work accomplished meets quality standards and specifications MINIMUM REQUIRED QUALIFICATIONS: High school diploma or equivalent. FAA Mechanics Certificate with Airframe and Powerplant Rating. Read and interpret aircraft diagrams, charts and schematics. Lift up to 50 lbs. Must not be allergic to fuels, oils, hydraulic fluids and cleaning solvents. Work and bend in confined work space. Must have manual dexterity required for technician. Must be able to repeatedly enter and exit aircraft using stationary steps/stairs. ADDITIONAL DESIRED QUALIFICATIONS: Knowledgeable and experienced using computers and aircraft software. Successful completion of at least one (1) Maintenance School is a plus. Engine Run and Taxi qualified on business jet aircraft, preferably on Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Lear Jet, Challenger, Global Express, Hawker Beechcraft, Embraer, etc. aircraft is a plus. ABOUT US: We care about you and your career, we care about you and the ones you care for, our success is your success, you are not just a contractor you're a valued team member and part of our family we look forward to working with you soon! HSGI, Inc. is a Full Service Aerospace, Engineering & IT Staffing & Consulting Firm supplying qualified technical and professional employees to the most reputable companies in the Aerospace/Aircraft industry-across the United States and abroad. Give Marie Ferrigno a call/text at ************** and email your resume to ******************

Empower Rental Group is hiring a Level 4 Mechanic in Orlando, FL! Empower Rental Group is a family of local equipment rental providers across the Southeastern US. We began with 3 locations in 2021 with the goal of being the difference in the equipment rental industry by doing everything differently. We now have over 36 locations, and we are adding a Top Tier Level 4 Mechanic to our team in the Orlando, FL location! Company Benefits: 401(k) 401(k) matching Medical Insurance Health Insurance Dental Insurance Vision insurance Health Savings Account Employer-paid life insurance Employee Assistance Program Employer-paid STD disability benefit Paid Parental leave Paid time off Referral program Retirement plan Employee Sharing Program Our Diesel Mechanics prepare rental equipment for delivery, make appropriate modifications and repairs to units before delivery, and clean units before delivery. Our Mechanics repair and clean equipment upon return from customer sites and complete service calls on units currently located at customer sites as assigned. Our Mechanics also complete preventative maintenance as needed as well as general yard work such as cleaning or preparing areas of work. Key Responsibilities: Assists customers with loading and unloading fleet orders. Makes notes on rental tags. Assists customers with questions/customer service as applicable. Assists other mechanics with tasks such as lifting or moving heavy objects. Cleans up the yard and shop area. May perform repairs on the small fleet. Diagnose standard issues with heavy equipment powertrain, hydraulic, and electrical systems using a computer analyzer and traditional troubleshooting methods. Complete standard and complex repairs to the fleet. Complete inspections. Completes any type of work with supervision. Completes preventative maintenance such as changing filters, checking fluids, and filling tires. Maintains a safe work environment. Assists in driving a continuous improvement strategy within the business to result in ongoing incremental gains in quality and efficiency. Completes repairs on company vehicles. Maintains a safe work environment. Demonstrates behaviors aligned with the Company's Core Values at all times. Performs other related duties as assigned. Job Requirements: Over 5 years of experience A Valid Driver's License and the Ability to Drive Company Vehicles per Insurance Requirements may be required on a case-by-case basis, depending on branch needs. Provide exceptional customer support and service during field visits. Excellent Customer Service Skills - for both internal and external customers. Exhibits average computer skills. Completes rental equipment preparation by delivery date. Maintains a ready line. Achieves quality standards. Must have own basic tools. Empower Rental Group is an Equal Opportunity Employer

Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver's License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.

Job DescriptionBenefits/Perks Flexible Scheduling Competitive Compensation We are looking for a skilled Mechanic to join our busy concrete cutting operation. As the company Mechanic, you will repair and maintain all of the company vehicles and equipment. You will be responsible for setting up and running an organized shop. This will include setup and maintenance of a preventative maintenance program. The ideal candidate is skilled in communicating with fellow employees, to get to the bottom of equipment and vehicle issues they might be experiencing to ensure operations run smoothly and without disruption. Responsibilities Diagnose and repair vehicles and equipment coming into the shop Carry out routine vehicle and equipment maintenance tasks Maintain an organized shop and work area Implement and maintain a preventative maintenance program Conduct in-depth vehicle and equipment inspections Create repair estimates and timelines and convey information to operations manager in an easy-to-understand manner Maintain accurate repair shop records and paperwork Qualifications High school diploma or GED is required Associate degree or completion of an automotive service technician training program is preferred Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred Strong organizational skills are required