Mechanic jobs in San Antonio, TX - 522 jobs

Seeking an experienced Generator Technician to perform preventive and corrective maintenance, troubleshooting, and start-up commissioning on power-generation equipment. This role is hands-on in the field and supports overall service operations through accurate documentation, customer interaction, and technical expertise. Qualifications 4+ years generator technician experience HS diploma required; technical training preferred Strong electrical/mechanical troubleshooting skills Valid driver's license; relevant certifications a plus Strong customer service and communication skills Ability to work independently and progress through skill levels Key Responsibilities Troubleshoot and repair generators (diesel, gas, standby) Perform PMs, load-bank testing, and startup commissioning Provide in-person and field technical support Diagnose electrical/mechanical issues and follow work instructions Document all work clearly and accurately Travel to customer sites; respond to emergency calls as needed Maintain clean driving record and provide own basic tools Follow all safety procedures and PPE requirements

Engel Enterprises is a leading sitework contractor in the San Antonio area and has been in business for 30 years. In order to make an application, simply read through the following job description and make sure to attach relevant documents. We operate numerous pick up trucks, End Dump trucks, Roll-Off Trucks as well as Wheel Loaders and Backhoes. Our crews depend on safe and properly functioning equipment each and every day to get their jobs done on time. xevrcyc As a mechanic most of the work will be performed in our shop however there will be times that a field repair may be necessary.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At Northrop Grumman Aeronautics Sector our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage, and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, but they're also making history. We are currently seeking Aircraft Structure Mechanics based in San Antonio, Texas. In this position, you will perform maintenance operations on F-18 aircraft, F-18 aircraft equipment, F-18 engines, F-18 components, and systems in accordance with DOD, manufacturer, company, supplier and other directives in support of aircraft modification. Job Duties: Performs a variety of operations to assemble and make major assembly structures such as fuselage panels and bulkheads, and structural subassemblies such as rudders, flaps, and stabilizers. Aligns parts on jigs using templates and fixtures. Performs such minor part-fitting operations as filing, sawing, burring, crimping, trimming, framing, riveting, drilling, and reaming. Measures parts with micrometers and calipers to verify dimensions. May modify incomplete and complete assemblies to incorporate changes to structure. May monitor and verify quality in accordance with statistical process or other control procedures. Basic Qualifications: Must have a High School Diploma or equivalent (GED) and a minimum of 4 years of aircraft maintenance experience Must have the ability to obtain and maintain a DoD Secret clearance within a reasonable amount of time as determined by business needs. Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc This position requires the ability to perform moderate strenuous physical and repetitious work to include: bending, stooping, kneeling, carrying tools, lifting up to 50 pounds, working overhead, and accessing small, confined spaces Must be able to pass a physical/respiratory evaluation to obtain and maintain necessary respirator clearance and compliance with all respirator fitting requirement Must have the ability to obtain and maintain Special Access Program (SAP) clearance within a reasonable amount of time as determined by business needs. Preferred Qualifications: Fighter type aircraft maintenance experience A&P license U.S. Navy or USMC background Active Secret DoD clearance Primary Level Salary Range: $53,900.00 - $83,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Benefits: Dental insurance Free uniforms Paid time off Vision insurance The Construction & Maintenance Mechanic is responsible for inspecting, maintaining, and repairing a wide range of light to mid-sized construction and landscaping equipment. This includes compact machinery such as skid steers, mini excavators, trenchers, compactors, mowers, trimmers, blowers, chainsaws, and other related machinery and tools. The mechanic ensures that all equipment operates safely, efficiently, and reliably to support daily operations in construction projects and maintenance properties. Key Responsibilities Inspect, diagnose, and repair small construction and landscape equipment, including both gas and diesel-powered machinery. Perform preventive maintenance and regular safety inspections on all types of compact and landscaping tools. Troubleshoot and repair mechanical, electrical, hydraulic, and fuel system issues. Service and replace defective parts such as engines, pumps, hydraulic hoses, belts, blades, and gearboxes. Sharpen and balance cutting blades and maintain proper calibration of mowing and trimming equipment. Test and calibrate repaired machinery to ensure proper performance and compliance with safety standards. Maintain detailed maintenance and repair records, including parts used and labor time. Read and interpret service manuals, wiring diagrams, and schematics. Maintain a clean, organized, and safe workshop environment. Assist with equipment setup, loading/unloading, and seasonal maintenance or storage. Communicate effectively with supervisors, equipment operators, and vendors to minimize downtime. Follow all company safety policies and applicable environmental regulations. Qualifications High school diploma or GED required; vocational or technical training in small engine or heavy equipment repair preferred. 2-4 years of experience working with small construction, landscaping, or agricultural equipment. Strong knowledge of mechanical, electrical, and hydraulic systems. Proficiency with diagnostic tools, hand tools, and power tools. Experience servicing brands such as Bobcat, Kubota, Toro, Stihl, John Deere, Honda, or similar. Valid driver's license; CDL or equipment operation certification a plus. Skills & Competencies Excellent troubleshooting and problem-solving abilities. Strong attention to detail and quality of work. Ability to work independently and prioritize multiple tasks. Good communication and teamwork skills. Commitment to safety and preventive maintenance practices. Ability to lift and move heavy equipment and work in outdoor environments. Work Environment Work performed in both shop and field settings, with regular exposure to outdoor conditions, noise, dust, and heavy equipment. May require lifting up to 75 lbs and standing or bending for extended periods. Overtime or weekend work may be required to meet operational needs or emergency repairs. Compensation: $24.00 - $30.00 per hour

JOB TITLE: Aircraft Mechanic II - Free Housing Support PAY RATE: $47-50/hour MUST BE US PERSONS We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Job Details: Contract Length: 12 months (opportunity for extension) Benefits: Medical, dental, and vision coverage through Cigna Perks: Bonus potential and priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: Up to two weeks, if applicable (terms and conditions may vary). Summary: Perform structural repairs and modifications on aircraft, including flight controls, hydraulics, and fuel systems. Read and interpret blueprints, technical orders, and manufacturer manuals for repair work. Utilize specialized tools such as torque wrenches, micrometers, and sheet metal brakes. Maintain technical certifications and follow strict safety protocols. Work various shifts, including weekends and overtime, as needed. This is a non-managerial, non-leadership role. Required Skills: 4+ years of heavy aircraft structures experience (clearly list aircraft platform experience on resume). Expertise in close tolerance drilling, reaming, removal, and installation of critical structures (e.g., doublers, triplers, seat tracks, stringers). Ability to obtain customer approval for aircraft access (Dual citizenship may affect eligibility). Physical Requirements: Must be able to climb ladders, work in confined spaces, and lift up to 35 lbs. Exposure to noise and elevated platforms, requiring PPE use. Desired Skills: Experience with VIP or specialty aircraft interiors. Depot-level/heavy structures maintenance experience. FAA Airframe and/or Powerplant certification (preferred). About Us: The Structures Company is a premier national staffing firm specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we provide professionals with opportunities to excel in the aviation and aerospace industries. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: aerospace, aviation, engineering, maintenance, aircraft design Take your aerospace career to new heights-apply today!

Company Info Circular Services, the largest privately held recycling and organics provider in the U.S., strengthens this mission through its national scale and long-term municipal partnerships. It operates over 25 facilities serving major long-term municipal and commercial contracts. The mission of Circular Services is to keep valuable materials in circulation and minimize the cost and environmental impact of landfills. The company services municipal contracts with some of the largest and fastest growing cities in the U.S. including New York City, Austin, San Antonio, and Phoenix. Generate Upcycle, now part of Circular Services, is a leading organics recycling and composting provider dedicated to helping people and communities contribute to something greater. Generate Upcycle expands access to composting for homes, businesses, and municipalities, managing a wide range of organic materials-including yard waste, food waste, and biosolids-through advanced grinding, blending, and aerated composting systems that produce high-quality compost. Together, Generate Upcycle and Circular Services deliver a unified, mission-driven platform for sustainable resource recovery, offering communities reliable, environmentally responsible recycling and organics solutions nationwide. About the Role: The Lead Mechanic will support a team of mechanics, coordinate repair schedules, manage parts inventory, and communicate with operations staff to minimize downtime. The position will also perform routine maintenance and servicing of equipment and trucks, including but not limited to diagnostics, inspections, parts replacement and system overhauls. Shift: Ranges from Monday-Friday, 7am-7pm, including weekends, with some variations per business needs. Responsibilities: Planning and scheduling services needed for site, including other sites Directing and monitoring other mechanics activities and ensuring the completion of scheduled maintenance Order parts and interact with vendors to ensure all equipment is serviced/repaired in a timely and safe manner Provides reports to Site Manager documenting mechanic activities and work log, and ensure all the site's mechanical needs are met Inspecting trucks, cranes, bulldozers, and other heavy equipment for proper performance. Diagnostics using computerized testing equipment Enter data in maintenance management system Cleaning, lubricating, and conducting routine services Cleaning and servicing of machine attachments, such as winches, blades and side booms. Perform major repairs when necessary Report damaged or faulty equipment, including safety concerns/hazards or defects to leadership on site when identified Perform emergency repairs in the field Perform other job-related duties as assigned Minimum Job Qualifications: High school diploma or GED preferred State issued, valid Driver's License Preferred Job Qualifications: Five (5) or more years' experience with heavy equipment maintenance required, preferably in the compost industry Advanced knowledge of diesel and gas engines, welding, brakes and hydraulics Advanced knowledge of federal, state, and local job site health and safety rules, regulations, and best practices Ability to perform complex repairs and preventative maintenance on equipment Strong troubleshooting and diagnostic abilities using both manual and computerized tools Proficiency with tools, machinery, and repair equipment Ability to delegate tasks and oversee job completion with efficiency and accuracy Strong decision-making under pressure, especially in time-sensitive repair situations Ability to prioritize work orders and manage shop workflow Recordkeeping skills for maintenance logs, inventory, and service histories Ability to use company maintenance software Excellent verbal and written communication skills with internal and external customers Time management and multitasking in a fast-paced environment Ability to be a team-player for overall company success. Working Conditions and Physical Requirements: Normal work environment is indoors and outdoors, with exposure to all weather conditions, dirt, high levels of noise, smells/odors and at times exposure to dangerous and/or toxic substances requiring necessary precautions, including PPE. The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of the job. Position requires the use of personal protective equipment (PPE) including, but not limited to, hearing protection, safety-toed boots, utility gloves, hard hat, reflective vest, and safety glasses. Manual dexterity and hand-eye coordination necessary to utilize tools and other equipment necessary to perform job duties Auditory and visual acuity to monitor surroundings, equipment sounds, and safety signals (with or without corrective devices). Frequent walking, standing, bending, stooping, climbing, and kneeling required in outdoor and uneven terrain environments. Tolerance to work in environments with strong odors, dust, humidity, and varying weather conditions (hot, cold, wet), and handle oils, fuels and other necessary liquids/chemicals. Must be able to lift, push, pull, and carry up to 35 pounds regularly, and up to 50 lbs. with assistance. Job Type: Full-time Pay Rate: $30-33, $1.50 increase after 90-180 days Hours can range from Monday-Friday, 7am-7pm, including weekends, with some variations per business demands. Work location/setting: San Antonio, TX Benefits: Paid Parental Leave Health insurance Dental insurance Vision insurance Life Insurance HSA/ FSA Paid time off Employee Assistance Program 401k matching Tuition Reimbursement EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

RAVN Group ("RAVN") is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Job Description: Department Summary The RAVN Aerospace Maintenance Department is a mission-focused, highly skilled team dedicated to ensuring the safety, readiness, and performance of our tactical aircraft fleet. With over 50 years of combined experience supporting military adversary air programs, our team brings deep expertise in tactical aviation maintenance. Staffed by certified A&P aircraft mechanics, technicians, quality assurance professionals, and logisticians, we deliver precise, efficient, and compliant maintenance operations. Our commitment to operational excellence is central to RAVN's mission, enabling safe, seamless, and reliable flight operations in demanding environments. Position Summary The ideal candidate for the Aircraft Mechanic position is a technically astute, disciplined, and team-oriented professional. Reporting to the Site Lead, this individual will perform organizational, intermediate, and limited depot-level maintenance on assigned aircraft, components, and equipment-including inspection, operational testing, repair, modification, and troubleshooting. The role requires advanced technical expertise to resolve complex issues and provide guidance and instruction to fellow team members. Responsible for the maintenance, inspection, troubleshooting of Airframe and Powerplant systems on the A-27 Tucano and BAe Hawk aircraft, reporting to the Maintenance Lead in the accomplishment of the following functions supporting Close Air Support flights. Candidates must demonstrate professionalism, productivity, and responsiveness to the needs of the company, colleagues, and customers. Flexibility is essential, as cross-training and additional duties may be assigned at leadership's discretion to meet evolving mission demands. Requirements Repair, replace and rebuild aircraft structures, system, and functional components. Assemble and install electrical, avionic, mechanical, hydraulic, structural components and accessories using hand tools and power tools. Develop, implement, and manage comprehensive maintenance schedules to maintain optimal performance and compliance with aviation safety regulations and industry standards. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems. Conduct regular quality assurance audits and inspections to verify compliance with military and FAA standards, identifying and correcting discrepancies. Service, repair, troubleshoot and modify aircraft and aircraft engines. Perform storage and shipment requirements on engines and support equipment to include documentation. Repair, rework and replace components or parts of CFSE to ensure proper operation. Refer to workbooks and technical publications to determine specifications to be met. Perform routine support equipment inspections and maintains and performs necessary corrective actions to include unscheduled maintenance. Maintain accurate and detailed records of all inspections, repairs, modifications, and component tracking in accordance with regulatory and internal documentation procedures. Collaborate with aircraft maintenance teams to coordinate repairs, upgrades, and replacements, minimizing downtime and maximizing fleet availability. Monitor industry trends, regulatory changes, and emerging technologies in aviation life support and egress systems; integrate best practices into operational procedures. Assist in the development and continuous improvement of standard operating procedures (SOPs), policies, and compliance protocols. Comply with all company, OSHA and customer safety regulations. Coordinate with procurement and supply chain teams to ensure timely sourcing and availability of parts, equipment, and consumables necessary for mission support. Load and download aircraft weapons systems. Have or have the ability to obtain a secret clearance. Desired Experience/Skills A&P Prior military Proven track record in performing precise equipment inspections, diagnosing faults, executing repairs, and ensuring maintenance compliance. Strong organizational skills with exceptional attention to detail and the ability to manage multiple priorities in a fast-paced, mission-driven environment. Effective leadership and communication skills with experience supervising or mentoring diverse technical teams. Proficient in Microsoft Office applications and maintenance tracking software; comfortable navigating digital tools for documentation and scheduling. Self-motivated and proactive with a problem-solving mindset and the ability to make informed decisions under pressure. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Physical Demands Occasional lifting of up to 50 pounds. Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls, reaching with hands. Regularly ascend/descend stairs. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous material. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday work may be required. Travel to various work sites may be required. Other duties as assigned. Work Authorization Must be lawfully eligible to work in the United States and complete an I-9 Form. Must have a clean driving record. RAVN Aerospace is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Pre-employment and ongoing physical certifications. RAVN Aerospace is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question.

This job is with Encode, Inc a fully owned subsidiary of Lancesoft •Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring •Ability and understanding of routing instructions and handling of harnesses. •Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes •Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modifications and repairs •Use tooling assemblies and fixtures for depot level modification and repair of electrical wiring •Perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft •Troubleshoot organizational and depot maintenance level malfunctions in aircraft electrical and comms/nav-systems •Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc... •Use all equipment in accordance with established safety and operating procedures. •Perform all tasks involved in the coordination, preparation, and movement of material and tools •Operate riding type electric powered elevating equipment to accomplish work assignments •Maintain necessary certifications, licenses and permits as required for assigned work. •Perform all duties of lower Electrical classifications as required to successfully accomplish assignments Ability to perform the following requirements: •The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. •Exposure to noise, working on elevated platforms •Use personal protective gear for face, eyes, ears, hand, and arms as required. •Pass visual acuity and color perception tests •Read, write, and comprehend the English language •Handle, use, and dispose of hazardous material •Obtain & maintain training certifications as required to support assignment responsibilities •Occasional (1 to 3 hrs) finger manipulation •On occasion, a 2-person lift may be necessary for weights greater than 50 lbs •Frequent reaching overhead (3 to 6 hrs) •Frequent walking on flat surfaces •Frequent standing flat or uneven surfaces •Frequent balancing on a ladder, steps, or uneven surfaces •Occasional climbing on 3-12 ft ladders or stands •Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time •Occasional contact with metals •Frequent exposure to noise Basic Qualifications (Required Skills/Experience): •10+ years of experience with electrical/electronic theories and avionics systems, shop mathematics and practices •10+ years of experience in working with schematics, specifications, assembly drawings and standard operating procedures. •10+ years of experience with component and wire installation to include repairing, modifying, testing and troubleshooting new, experimental, and disturbed systems •Experience with fabricating new wire bundles •Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) •Ability to work variable shifts including weekends and overtime Preferred Qualifications (Desired Skills/Experience): •Experience with Avionics •Experience with Depot Level/Modification maintenance. •Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment •FAA certification in Airframe and/or Power Plant

Job Description -Job Type: Contractor -Per diem: we offer the highest non-taxable per diem in the market(including on overtime) -Hours: overtime is available -Tools: toolbox and tools required Job Summary:We are seeking a skilled Aircraft Interior Maintenance Technician responsible for the upkeep and repair of interior components on various Commercial Aircraft Types. The ideal candidate will ensure the interior is in optimal condition, adhering to safety standards and regulatory guidelines.Essential Responsibilities: Remove, clean, service, and replace various aircraft components using specialized tools and ground support equipment as per supervisor's directives and manuals. Perform seat and armrest recovery, and service emergency equipment according to specifications. Provide training for lower skill levels and maintain tools in serviceable condition. Follow safe maintenance practices, keep work area clean, and document work performed for Training Department records. Flexibility to work weekends and either 1st or 2nd shift as required. Successfully complete necessary courses identified by the Training Department. Undertake any additional assignments delegated by the supervisor. Job Specifications:Skills: Proficiency in safety equipment operation, use of drill motor, rivet gun, and removal/reinstallation of various interior components. Familiarity with ATA codes, F.A.R.'s, and company procedures. General knowledge of paperwork procedures including job cards, routine/non-routine cards, service bulletins, and work sign-off procedures. Job Qualifications: Education: High school diploma or GED required. Certification: FAA Airframe & Powerplant License preferred. Experience: Minimum 6 months experience in heavy commercial maintenance, specifically C and D checks. Join our team and contribute to the safe and efficient maintenance of commercial aircraft interiors. Apply now to be part of a dynamic and rewarding environment.

Job ID#: 213230 Job Category: L - Mechanics Associate - W2 Duration: 52 Shift: 1 **PDS Defense, Inc. is seeking an JWACS Structural Depot Level Mechanic, in San Antonio, TX. Job ID#213230** **Job Description:** This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. **Position Responsibilities:** * Perform efforts associated with flight controls installation, removal and rigging. Landing gear and servicing of aircraft. * Perform essential component change outs for example servo pumps, filters and engine components. * Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair. * Access aircraft data via computer systems and initiate on-line parts and discrepancy requests * Maintain necessary certifications, licenses and permits as required for assigned work * Prioritize workload to maintain schedules on assigned projects * Use Hazardous Energy and Lock Out /Tag systems applications to ensure working environment is deemed safe for access and on the job performance * Use all equipment in accordance with established safety and operating procedures. * Assist other team members (Avionics, Structures, Electrics) in order to ensure cost/schedule targets are met. * Diagnose and correct malfunctions occurring in assembly processes. *Use precision measuring instruments, gauges, tools, etc., necessary to check dimensions and conformance to quality requirements. * Ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds * This position requires the ability to pass an assessment during the training cycle. **Basic Qualifications (Required Skills/Experience):** * 4+ years of experience Depot Level/Heavy General maintenance * 4+ years of experience working various aircraft exterior and interior systems including hydraulic, flight control, monuments, landing gears, fuel systems, and engines * 4+ years of experience in working with blueprints, specifications, assembly drawings and standard operating procedures. * Able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime **Preferred Qualifications (Desired Skills/Experience):** * Experience performing aircraft engine runs, and engine borescope inspections. * Operate an aircraft tug/tow vehicle, forklift, mobile crane, and riding type electric powered elevating equipment * Experience with REDARS and/or Gold-ESP * Active Secret clearance or ability to obtain Secret clearance post start (not a requirement). **Education / Experience:** High School Diploma or Equivalent Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter. Job Requirements Minimum Security Clearance: No Clearance **VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled** To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ******************************************** or ********************************************* The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled

Immediate positions are available for experienced Airframe/Powerplant Mechanic in San Antonio, TX. We are in need of both experienced A&P mechanics. Aircrafts we are working on: E190, A300, Boeing 787, Boeing 757 - 3 lines, Boeing 747, MD11 - 2 lines, DC10 -Job Type: Contractor -Hire Date: Immediate -Compensation: $25 -$28/ hour (based on experience) -Per diem: we offer the highest non-taxable per diem in the market(including on overtime) -Hours: overtime is available -Tools: toolbox and tools required Position Responsibilities: Interpret aircraft technical manuals, and drawings Performs all airframe, power-plant, propeller repairs and modifications assigned in accordance with company and FAA requirements. Performs routine inspections and troubleshooting Keep a clean & orderly work environment Perform all other duties as assigned in a safe manner Qualifications: -Education: High school or equivalent (Required) -Experience: Airframe/Powerplant Mechanic (7 years required) Experience with Cargo/Commercial aircraft (7years preferred) -License: A&P (preferred) For more information call ************** (Mon-Fri 8am-5pm CDT) Keywords: Airframe/Powerplant Mechanic, A&P Mechanic, San Antonio, TX, E190, A300, Boeing 787, Boeing 757, Boeing 747, MD11, DC10, Aircraft Maintenance, FAA Compliance, Technical Manuals, Aircraft Repairs, Propeller Repairs, Troubleshooting, Routine Inspections, High School Diploma, Cargo Aircraft, Commercial Aircraft, Contractor Position, Immediate Hire, Competitive Compensation, Non-Taxable Per Diem, Overtime Available, Tool Requirement.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Inspecting and repairing ground support equipment * Installing and removing Quick Engine Change (QEC) kits on aircraft engines * Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: * Performing engine QEC buildup actions, both assembly and tear down. * Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems * Inspects, tests, and operates GSE to determine equipment serviceability and proper operation * Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components * Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories * Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses * Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations * Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. * Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. * Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. * Completing all required documentation and tagging requirements of QEC items. * Order QEC parts from COMBS. * Refer to technical publications to determine specifications to be met. * Track and record calibration dates to insure that support equipment is up to date. * Keep files with documentation and certifications of calibrated equipment. * Ensure that equipment is sent out for calibration when due. * Ensure that all equipment is accounted for. * Assign I.D. numbers to each piece of equipment. * When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. * Each LD. number must have a file of record. * Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. * Research and order materials for repair of support equipment. * Performs engine QEC build-up actions, i.e. assembly and teardown. * Cleaning of warehouse, shops, offices and restrooms as required. * Clerical and other assigned duties as required. * Prepares GSE for storage and transportation * Other Duties as assigned * Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Understanding of scheduling techniques and technical order requirements. * Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. * Mental and visual ability to read and understand detailed technical publications and instructions. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. * Knowledge of contractual requirements. * Extensive working knowledge in logistics and data information systems. * Education and Experience: * Graduation from a standard four (4) year high school or equivalent (GED). * Thirty-six (36) months in one or more of the maintenance trades or the * Minimum three (3) years recent aircraft maintenance experience * Valid FAA Airframe and Power plant Certificate Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Inspecting and repairing ground support equipment Installing and removing Quick Engine Change (QEC) kits on aircraft engines Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: Performing engine QEC buildup actions, both assembly and tear down. Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems Inspects, tests, and operates GSE to determine equipment serviceability and proper operation Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. Completing all required documentation and tagging requirements of QEC items. Order QEC parts from COMBS. Refer to technical publications to determine specifications to be met. Track and record calibration dates to insure that support equipment is up to date. Keep files with documentation and certifications of calibrated equipment. Ensure that equipment is sent out for calibration when due. Ensure that all equipment is accounted for. Assign I.D. numbers to each piece of equipment. When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. Each LD. number must have a file of record. Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. Research and order materials for repair of support equipment. Performs engine QEC build-up actions, i.e. assembly and teardown. Cleaning of warehouse, shops, offices and restrooms as required. Clerical and other assigned duties as required. Prepares GSE for storage and transportation Other Duties as assigned Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: Knowledge, Skills, and Abilities (Required Skills include the ability to:) Understanding of scheduling techniques and technical order requirements. Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. Mental and visual ability to read and understand detailed technical publications and instructions. Ability to communicate effectively, both orally and in writing. Ability to deal courteously with the customer. Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. Knowledge of contractual requirements. Extensive working knowledge in logistics and data information systems. Education and Experience: Graduation from a standard four (4) year high school or equivalent (GED). Thirty-six (36) months in one or more of the maintenance trades or the Minimum three (3) years recent aircraft maintenance experience Valid FAA Airframe and Power plant Certificate Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

**ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Inspecting and repairing ground support equipment + Installing and removing Quick Engine Change (QEC) kits on aircraft engines + Dealing with Coworkers/Clients/public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Performing engine QEC buildup actions, both assembly and tear down. + Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems + Inspects, tests, and operates GSE to determine equipment serviceability and proper operation + Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components + Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories + Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses + Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations + Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. + Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. + Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. + Completing all required documentation and tagging requirements of QEC items. + Order QEC parts from COMBS. + Refer to technical publications to determine specifications to be met. + Track and record calibration dates to insure that support equipment is up to date. + Keep files with documentation and certifications of calibrated equipment. + Ensure that equipment is sent out for calibration when due. + Ensure that all equipment is accounted for. + Assign I.D. numbers to each piece of equipment. + When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. + Each LD. number must have a file of record. + Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications **and** FAA regulations. + Research and order materials for repair _of_ support equipment. + Performs engine QEC build-up actions, i.e. assembly and teardown. + Cleaning of warehouse, shops, offices and restrooms as required. + Clerical and other assigned duties as required. + Prepares GSE for storage and transportation + Other Duties as assigned + Abide by all Company policies and procedures not otherwise noted above. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities (Required Skills include the ability to:)** + Understanding of scheduling techniques and technical order requirements. + Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. + Mental and visual ability to read and understand detailed technical publications and instructions. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. + Knowledge of contractual requirements. + Extensive working knowledge in logistics and data information systems. + **Education and Experience:** + Graduation from a standard four (4) year high school or equivalent (GED). + Thirty-six (36) months in one or more of the maintenance trades or the + Minimum three (3) years recent aircraft maintenance experience + Valid FAA Airframe and Power plant Certificate **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Job DescriptionBenefits: Dental insurance Free uniforms Paid time off Vision insurance The Construction & Maintenance Mechanic is responsible for inspecting, maintaining, and repairing a wide range of light to mid-sized construction and landscaping equipment. This includes compact machinery such as skid steers, mini excavators, trenchers, compactors, mowers, trimmers, blowers, chainsaws, and other related machinery and tools. The mechanic ensures that all equipment operates safely, efficiently, and reliably to support daily operations in construction projects and maintenance properties. Key Responsibilities Inspect, diagnose, and repair small construction and landscape equipment, including both gas and diesel-powered machinery. Perform preventive maintenance and regular safety inspections on all types of compact and landscaping tools. Troubleshoot and repair mechanical, electrical, hydraulic, and fuel system issues. Service and replace defective parts such as engines, pumps, hydraulic hoses, belts, blades, and gearboxes. Sharpen and balance cutting blades and maintain proper calibration of mowing and trimming equipment. Test and calibrate repaired machinery to ensure proper performance and compliance with safety standards. Maintain detailed maintenance and repair records, including parts used and labor time. Read and interpret service manuals, wiring diagrams, and schematics. Maintain a clean, organized, and safe workshop environment. Assist with equipment setup, loading/unloading, and seasonal maintenance or storage. Communicate effectively with supervisors, equipment operators, and vendors to minimize downtime. Follow all company safety policies and applicable environmental regulations. Qualifications High school diploma or GED required; vocational or technical training in small engine or heavy equipment repair preferred. 24 years of experience working with small construction, landscaping, or agricultural equipment. Strong knowledge of mechanical, electrical, and hydraulic systems. Proficiency with diagnostic tools, hand tools, and power tools. Experience servicing brands such as Bobcat, Kubota, Toro, Stihl, John Deere, Honda, or similar. Valid drivers license; CDL or equipment operation certification a plus. Skills & Competencies Excellent troubleshooting and problem-solving abilities. Strong attention to detail and quality of work. Ability to work independently and prioritize multiple tasks. Good communication and teamwork skills. Commitment to safety and preventive maintenance practices. Ability to lift and move heavy equipment and work in outdoor environments. Work Environment Work performed in both shop and field settings, with regular exposure to outdoor conditions, noise, dust, and heavy equipment. May require lifting up to 75 lbs and standing or bending for extended periods. Overtime or weekend work may be required to meet operational needs or emergency repairs.

JOB TITLE: (P) Aircraft Mechanic II - General VC Maintenance - Free Housing Support PAY RATE: $35-40/hour We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: up to two weeks if applicable Summary: Sealing, painting, shimming, preserving aircraft structure. Reading and interpreting engineering drawings. Using tooling for structural parts modification and repair. Performing flight controls installation, removal, and rigging. Adhering to safety and operating procedures. Requirements: High school diploma or GED 4+ years of on-aircraft general maintenance experience. Experience with Depot Level/Heavy General maintenance. Proficiency in aircraft systems: hydraulic, flight control, monuments, landing gears, fuel systems, engines. Ability to interpret engineering drawings and perform modifications. Eligibility for aircraft access approval (may exclude dual citizens). Knowledge of shop mathematics and practices. Proficiency in schematics, assembly drawings, and computer skills. Flexibility to work varied shifts, including weekends and holidays. Must be a U.S. Person (as defined by ITAR). Desired Skills: FAA A&P License or Military Technical School equivalent. Experience with aircraft engine runs and borescope inspections. Certification to operate equipment like forklifts and mobile cranes. About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights-apply today!

RAVN Group ("RAVN") is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Job Description: Company Summary RAVN is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Department Summary The RAVN Aerospace Maintenance Department is a mission-focused, highly skilled team dedicated to ensuring the safety, readiness, and performance of our tactical aircraft fleet. With over 50 years of combined experience supporting military adversary air programs, our team brings deep expertise in tactical aviation maintenance. Staffed by certified A&P aircraft mechanics, technicians, quality assurance professionals, and logisticians, we deliver precise, efficient, and compliant maintenance operations. Our commitment to operational excellence is central to RAVN's mission, enabling safe, seamless, and reliable flight operations in demanding environments. Position Summary The ideal candidate for the Aircraft Mechanic position is a technically astute, disciplined, and team-oriented professional. Reporting to the Site Lead, this individual will perform organizational, intermediate, and limited depot-level maintenance on assigned aircraft, components, and equipment-including inspection, operational testing, repair, modification, and troubleshooting. The role requires advanced technical expertise to resolve complex issues and provide guidance and instruction to fellow team members. Responsible for the maintenance, inspection, troubleshooting of Airframe and Powerplant systems on the BAe Hawk aircraft, reporting to the Maintenance Lead in the accomplishment of the following functions supporting Adversary Air Support flights. Candidates must demonstrate professionalism, productivity, and responsiveness to the needs of the company, colleagues, and customers. Flexibility is essential, as cross-training and additional duties may be assigned at leadership's discretion to meet evolving mission demands. Requirements Repair, replace and rebuild aircraft structures, system, and functional components. Assemble and install electrical, avionic, mechanical, hydraulic, structural components and accessories using hand tools and power tools. Develop, implement, and manage comprehensive maintenance schedules to maintain optimal performance and compliance with aviation safety regulations and industry standards. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems. Conduct regular quality assurance audits and inspections to verify compliance with military and FAA standards, identifying and correcting discrepancies. Service, repair, troubleshoot and modify aircraft and aircraft engines. Perform storage and shipment requirements on engines and support equipment to include documentation. Repair, rework and replace components or parts of CFSE to ensure proper operation. Refer to workbooks and technical publications to determine specifications to be met. Perform routine support equipment inspections and maintains and performs necessary corrective actions to include unscheduled maintenance. Maintain accurate and detailed records of all inspections, repairs, modifications, and component tracking in accordance with regulatory and internal documentation procedures. Collaborate with aircraft maintenance teams to coordinate repairs, upgrades, and replacements, minimizing downtime and maximizing fleet availability. Monitor industry trends, regulatory changes, and emerging technologies in aviation life support and egress systems; integrate best practices into operational procedures. Assist in the development and continuous improvement of standard operating procedures (SOPs), policies, and compliance protocols. Comply with all company, OSHA and customer safety regulations. Coordinate with procurement and supply chain teams to ensure timely sourcing and availability of parts, equipment, and consumables necessary for mission support. Load and download aircraft weapons systems. Have or have the ability to obtain a secret clearance. Desired Experience/Skills A&P Prior military Proven track record in performing precise equipment inspections, diagnosing faults, executing repairs, and ensuring maintenance compliance. Strong organizational skills with exceptional attention to detail and the ability to manage multiple priorities in a fast-paced, mission-driven environment. Effective leadership and communication skills with experience supervising or mentoring diverse technical teams. Proficient in Microsoft Office applications and maintenance tracking software; comfortable navigating digital tools for documentation and scheduling. Self-motivated and proactive with a problem-solving mindset and the ability to make informed decisions under pressure. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Physical Demands Occasional lifting of up to 50 pounds. Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls, reaching with hands. Regularly ascend/descend stairs. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous material. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday work may be required. Travel to various work sites may be required. Other duties as assigned. Work Authorization Must be lawfully eligible to work in the United States and complete an I-9 Form. Must have a clean driving record. RAVN Aerospace is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Pre-employment and ongoing physical certifications. RAVN Aerospace is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question.

Performs on and off aircraft electrical modification to electrical wiring and system components Perform complex connector terminations including shielded wires, coaxial cables and fiber optic wiring. Understand wire handling and routing instructions. Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrate technical ability to read and interpret engineering drawings, technical orders, process specifications, and retrofit requirements to perform electrical modification/repair. Adhere to government and company procedural guidance, perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work. Troubleshoot malfunctions in aircraft electrical and environmental systems of moderate difficulty at the organizational or depot maintenance level. Performs aircraft bench and/or flight line operational testing and troubleshooting in accordance with DOD, manufacturer, company, supplier and other directives. Performs assembly, installation, check-out physical characteristics, operational testing and modification of wire bundles in the testing, development and modification of aircraft in accordance with DOD, manufacturer, company, supplier and other directives. Responsible for the proper performance of assignments and the prudent handling of product, tools and equipment. Required to consult with management and peers to assess best work process. Will assist and train less senior employees. May be required to lead teams through more complex aircraft relevant tasks. Able to prioritize workload to maintain schedules on assigned projects. Perform all duties of lower Electrics classifications as required to successfully accomplish assignments. Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. To accomplish assigned work. Ensure that all equipment is used in accordance with established safety and operating procedures. Diagnose and correct malfunctions occurring in assembly processes. Use any and all precision measuring instruments, gauges, tools, etc., necessary to check dimensions and conformance to quality requirements. Maintain necessary certifications, licenses and permits as required for assigned work. Able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. Able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime Must be familiar with Hazardous Energy and Lock Out /Tag systems applications to ensure working environment is deemed safe for access and on the job performance. Will be required to assist other team members (General Mechanics, Structures, Avionics) in order to ensure cost/schedule targets are met. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at San Antonio. Candidate maybe be required to travel up to 25%. This position requires the ability to pass assessment during the training cycle. This position requires adherence to the SA Tool and FOD procedures. Ability to perform the following physical requirements: The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. Exposure to noise, working on elevated platforms Use personal protective gear for face, eyes, ears, hand, and arms as required. Pass visual acuity and color perception tests Experience understanding and interpreting detailed written and verbal work instructions and processes Handle, use, and dispose of hazardous material Obtain & maintain training certifications as required to support assignment responsibilities Occasional (1 to 3 hrs) finger manipulation On occasion, a 2-person lift may be necessary for weights greater than 50 lbs Frequent reaching overhead (3 to 6 hrs) Frequent walking on flat surfaces Frequent standing flat or uneven surfaces Frequent balancing on a ladder, steps, or uneven surfaces Occasional climbing on 3-12 ft ladders or stands Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time Occasional contact with metals Frequent exposure to noise BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Position requires 4+ years of experience in those duties as previously described for satisfactory performance. Position requires 4+ years of experience/knowledgeable in electrical/electronic theories and systems sufficient to perform assigned duties. Experience with fabricating new wire bundles Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) Ability to work rotating shift (1st, 2nd or 3rd) PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE): Experience with Depot Level/Modification maintenance. Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

Job Description Immediate positions are available for experienced Airframe/Powerplant Mechanic in San Antonio, TX. We are in need of both experienced A&P mechanics. Aircrafts we are working on: E190, A300, Boeing 787, Boeing 757 - 3 lines, Boeing 747, MD11 - 2 lines, DC10 -Job Type: Contractor -Hire Date: Immediate -Compensation: $25 -$28/ hour (based on experience) -Per diem: we offer the highest non-taxable per diem in the market(including on overtime) -Hours: overtime is available -Tools: toolbox and tools required Position Responsibilities: Interpret aircraft technical manuals, and drawings Performs all airframe, power-plant, propeller repairs and modifications assigned in accordance with company and FAA requirements. Performs routine inspections and troubleshooting Keep a clean & orderly work environment Perform all other duties as assigned in a safe manner Qualifications: -Education: High school or equivalent (Required) -Experience: Airframe/Powerplant Mechanic (7 years required) Experience with Cargo/Commercial aircraft (7years preferred) -License: A&P (preferred) For more information call ************** (Mon-Fri 8am-5pm CDT) Keywords: Airframe/Powerplant Mechanic, A&P Mechanic, San Antonio, TX, E190, A300, Boeing 787, Boeing 757, Boeing 747, MD11, DC10, Aircraft Maintenance, FAA Compliance, Technical Manuals, Aircraft Repairs, Propeller Repairs, Troubleshooting, Routine Inspections, High School Diploma, Cargo Aircraft, Commercial Aircraft, Contractor Position, Immediate Hire, Competitive Compensation, Non-Taxable Per Diem, Overtime Available, Tool Requirement.