Mechanic jobs in San Tan Valley, AZ - 762 jobs

Pay: Up to $38/HR Full-Time: Monday-Friday Day Shift: 6:00 AM-2:30 PM Repairs and maintains electrical, propane and gasoline industrial trucks such as Barrett, Crown and Raymond by performing the following duties. * Reads job orders and observes and listens to truck in operation to determine malfunction and plan work procedures * Disassembles, inspects and performs repairs and rebuilds of defective parts on electric, propane or gasoline powered industrial equipment including but not limited to such components as ignition systems, front wheel alignment, power trains, hydraulics, and fuel systems * Operates metalworking machines, such as a lathe, milling machine, and punch press, to fabricate housings, fittings, jigs, and fixtures, and verifies dimensions * Tests assembled instruments for circuit continuity and operational reliability and repairs or replaces electrical components, such as resistors, capacitors, solenoids and other various electronic components * Installs changes or recharges batteries * Initiates purchase order for parts and machines * Inspects used parts to determine changes in dimensional requirements; Examines protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments * Lubricates moving parts and operates repaired equipment to verify conformance to manufacturer specifications * Operates welder, grinder, and drill press to fabricate special lifting or towing attachments, hydraulic systems, shields, or other devices according to blueprints or schematic drawings * Other duties as assigned. Qualifications: * High school diploma or GED preferred * Fluency in English; speak, read, and write * 5+ years related experience and/or training; Certified in fork-lift maintenance through technical training courses is preferred; or equivalent combination of education and experience * Certified and skilled in fork-lift operation Physical Demands: * While performing the duties of this job, the employee is regularly required to stand, reach and handle objects, tools, or controls. The employee frequently is required to walk; stoop, kneel, crouch, or crawl; and communicate when necessary to complete duties. The employee is occasionally required to sit, and climb or balance. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include the ability to observe surroundings, packages, and labels at both close and far distances. Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Stamps Auto Tire Pros Is Family owned and operated and has been in business since 2007. We are here to help our customer one Honest Repair at a Time. Honesty and integrity are the cornerstone of our business. Job Description Opportunity and position information: Master Certified Automotive Technician to join our Team to help grow our successful company. Currently we are looking for a Master Technician that has a positive attitude and the ability to always say yes to join our Award Winning Team! We are an established company with solid growth and are placed firmly within the market with a solid customer base, offering competitive pay structures Benefits: -5 Day work week Monday Through Friday -6 Paid Holidays -5 days paid PTO time annually -Company group Health Insurance -Modern shop -Well-maintained equipment -Plenty of room and lifts for our Techs -Modern waiting rooms and Sales Counters -All the latest software, Wi-Fi and tablets for every Tech -ASE Certified Technicians -Advanced management and sales training -Performance based pay with sky's the limit -Our customers trust our facility so we always have plenty of good business for our Techs year-round -Advanced training and testing paid -Excellent work environment and Team -Plenty of growth potential We are open to the right individual! *Even if YOU have never worked in an independent shop, we invite you to talk to us to find out more about our facility, our work and our area! Qualifications Primary Responsibilities include (but are not limited to): Application of in-depth automotive repair knowledge Providing service of the highest quality to our customers Performs skilled mechanical work while analyzing and diagnosing problems Inspect, replace and/or repair defective parts while performing preventative maintenance on automobiles Continuously learn new technical information and techniques to stay abreast with rapidly changing automotive technology Demonstrate behaviors consistent with the company's vision, mission, and core values in all interaction with customers, co-workers, managers, and suppliers Adhere to all company policies, procedures, and safety standards Maintain a safe, clean, and organized work area Willing and able to perform Digital Vehicle Inspections with speed and precision Master Certified ASE 10 Years Experience Willingness to observe all safety precautions for protections against accidents, dangerous fluids, chemicals, etc Pay increases with performance. Ability to work in a dynamic and team-oriented environment. Additional Information *Submit YOUR resume with confidence that all contacts with us are completely confidential. Do it TODAY! Opportunity offered by: Stamps Auto Tire Pros LLC. This opportunity located in: Queens Creek, Chandler, Mesa, San Tan Valley, Gilbert, Arizona Metro Area: Phoenix For more information about this career opportunity please contact: Contact: Hiring Manager John ************

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Job DescriptionAirframe & Powerplant (A&P) Mechanic - Flight School Compensation: $25-$48 per hour (based on 4 levels of experience) Job Type: Full-Time | On-SiteLocation: Phoenix, AZ Benefits: Full Medical, Dental, Vision Insurance, 401k, PTO Schedule: Full-time Day, Night - 10H shifts (overtime available) About the Role We are seeking a skilled and motivated Airframe & Powerplant Mechanic to support maintenance operations for a busy flight training organization. This role works on a fleet of general aviation aircraft, performing both scheduled and unscheduled maintenance. Ideal candidates are detail-driven, safety-focused, and comfortable working in a fast-paced training environment. We offer four technician levels, each with a structured pay range from $25 up to $48 per hour, depending on experience, certifications, and demonstrated capability.What You'll Do Perform maintenance, inspections, troubleshooting, and repairs on flight school aircraft in accordance with FAA regulations and company maintenance procedures. Interpret and apply technical documentation including maintenance manuals, wiring diagrams, IPCs, SBs, and ADs. Ensure all work performed is documented accurately and aircraft are returned to service in airworthy condition. Maintain a clean, organized, and safe work environment. Communicate clearly with team members, instructors, and management regarding aircraft status and maintenance timelines. Assist in workflow management by adjusting priorities based on operational needs. Flexibility to work multiple shifts as needed (day/night/10-hour shifts). RequirementsLicensing & Education Airframe & Powerplant (A&P) Certificate - Required Ability to obtain Inspection Authorization (IA) within 3 months of hire (required). High school diploma or equivalent (preferred). Experience Minimum 3 years of general aviation (GA) experience as a certificated A&P. Experience with Piper aircraft preferred. G1000 experience is a plus. Skills & Abilities Strong troubleshooting and decision-making skills; able to make airworthiness determinations independently. Solid understanding of 14 CFR Parts 43 and 91. Strong communication and teamwork abilities. Proficiency with Microsoft Office; ability to learn Talon RMS or similar maintenance tracking systems. High attention to detail and accuracy in documentation. Self-motivated, proactive, and adaptable in a fast-changing training environment. Physical & Safety Requirements Ability to lift up to 50 lbs as needed. Work may require standing, bending, or stooping for extended periods. Exposure to typical aviation environments including fuel, solvents, aircraft noise, outdoor conditions, and hangar operations. Use of shop tools, equipment, vehicles (van, truck, cart), and aircraft as required.

Diesel Mechanic Southwest Mobile Storage is the leading provider of sales and rentals of portable storage, construction offices, and custom containers in the Southwest. With a commitment to high-quality products and exceptional customer service, we set ourselves apart by doing the right thing the right way. As we continue to grow, we're seeking a dedicated, experienced Diesel Mechanic to join our team and help us maintain and service our fleet of vehicles. This is an excellent opportunity to grow with a fast-paced, diverse, and exciting company. If you are an ambitious, honest, and skilled mechanic who is looking for long-term career growth, we want to hear from you! ($32-$35 DOE) Key Responsibilities: Perform repairs on trucks and other motor vehicles to ensure safe and efficient operation. Conduct routine vehicle maintenance and inspections to keep the fleet in optimal condition. Change tires and perform other necessary repairs as needed. Utilize diagnostic tools to test and troubleshoot vehicle components. Complete quality inspections on vehicles before they are returned to service. Other duties as assigned by leadership. Qualifications: Previous experience as a Diesel Mechanic or similar role. Proficient knowledge of shop equipment and tools. Strong mechanical aptitude with excellent troubleshooting skills. Detail-oriented with the ability to meet deadlines. Ability to thrive in a fast-paced, team-oriented environment. Benefits: Competitive salary and growth opportunities. Comprehensive benefits package including medical, dental, vision, and life insurance. 401(k) with company match. Paid time off, Sick time, and 9 paid holidays annually. Monthly BBQs, raffles, and a fun company culture. Job Type: Full-time, Onsite. *Not a Remote Position* Main Office Location: 1005 N 50th St Phoenix, AZ 85008 Who We Are: Southwest Mobile Storage is a family-owned shipping container business founded in 1995. Our strength for more than 30 years comes from the specialized knowledge and passion of our people, along with serving over 24,000 commercial, construction and residential customers. Equal Opportunity Employer: Southwest Mobile Storage Inc is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to providing equal employment opportunities to all employees and applicants. We encourage and love to hire veterans, military experience welcome! If you're ready to join a winning team and make an impact, apply today! We look forward to welcoming you aboard.

GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Job Description: A&P Mechanic (Level I - Senior) Location: Phoenix, AZ Company: FlyAeroguard Flight Training Center Aircraft: Piper Archers/Cherokees/Seminoles, Cessna, Cirrus, Beechcraft, Mooney, Diamond & other GA aircraft Position Overview FlyAeroguard is seeking A&P Mechanics at all levels (I, II, III, and Senior) to support our rapidly growing general aviation maintenance operations in Phoenix, AZ. This role is ideal for experienced mechanics who take pride in high-quality workmanship and enjoy working on a diverse fleet of single- and multi-engine piston aircraft. You will perform inspections, maintenance, troubleshooting, and repairs on training fleet aircraft in accordance with FAA regulations and company standards. Key Responsibilities Perform scheduled and unscheduled maintenance on single-engine and multi-engine general aviation aircraft (Piper Archer, Cherokee, Seminole; Cessna; Cirrus; Beechcraft; Mooney; Diamond Aircraft) Conduct 50-hour, 100-hour, annuals, progressive inspections, and service bulletins Troubleshoot and repair airframe, engine, electrical, and flight control systems Ensure all work is completed IAW FAA Part 43 and Part 91 requirements Document all maintenance actions accurately and completely in aircraft logbooks Identify discrepancies, perform corrective actions, and follow proper return-to-service procedures Maintain a clean, safe, and organized work environment Assist with fleet AOG situations and on-call needs when required Mentor junior mechanics (Sr-level roles) and support continuous training & improvement Required Qualifications Valid FAA A&P License Experience working on general aviation aircraft from manufacturers such as: Piper, Cessna, Cirrus, Beechcraft, Mooney, Diamond Strong knowledge of piston engine systems and GA maintenance procedures Ability to read and interpret maintenance manuals, service bulletins & wiring diagrams Must pass background check & drug/alcohol testing Preferred Qualifications 2-10+ years of general aviation maintenance experience (depending on level) Inspection Authorization (IA) a plus Experience in flight school or high-utilization aircraft environments Prior experience mentoring or leading maintenance teams (Sr-level) Soft Skills Strong attention to detail & safety mindset Effective communication and teamwork Ability to work in a fast-paced environment with shifting priorities Reliable, punctual, and quality-driven

Job Description We are seeking a skilled and dedicated Forklift Technician to join our team in Phoenix, AZ. In this role, you will play a crucial part in ensuring the safe and efficient operation of our forklift and heavy equipment fleet. If you have a passion for mechanics and a knack for problem-solving, we want to hear from you! This is NOT a forklift operator position. This is a Forklift Mechanic role focused on repair and maintenance. Key Responsibilities: Perform routine maintenance and repairs on various types of forklifts and heavy equipment (gas, diesel, and electric). Troubleshoot and diagnose mechanical, electrical, and hydraulic issues to ensure optimal equipment performance and safety. Conduct inspections and tests to proactively identify potential issues before they escalate. Maintain accurate and timely records of repairs, parts used, and maintenance activities. Respond to service calls for both shop and field repairs. Collaborate with team members to improve equipment reliability and reduce downtime. Stay current with industry trends and advancements in forklift and material handling technology. Follow all OSHA safety standards and company policies while maintaining a clean and organized workspace. Qualifications: High school diploma or equivalent required; technical or vocational certification in mechanics preferred. 2+ years of experience as a forklift mechanic or heavy equipment technician. Strong understanding of mechanical, electrical, and hydraulic systems. Ability to read and interpret technical manuals, wiring diagrams, and schematics. Excellent problem-solving skills, attention to detail, and organizational abilities. Capable of working independently as well as part of a team. Valid driver's license and clean driving record (company vehicles may be provided for field work). Ability to pass background and drug screening Must supply own tools (preferred) Preferred Qualifications: OEM certifications (Toyota, Hyster, Crown, etc.) ASE or equivalent mechanical certifications Bilingual (English/Spanish) is a plus What We Offer: Health, dental, and vision insurance Paid time off, holidays, and 401(k) Opportunities for advancement and ongoing training Company vehicle and mobile phone for field service techs Ready to bring your skills to a team that values your expertise? Apply now and become a key part of our growing operation in Phoenix, AZ!

Description:You will be the Aircraft Mechanic for the Quick-Response Team which is responsible for maintaining F‑35 aircraft readiness worldwide. This position is located at our Luke AFB, AZ site. What You Will Be Doing As the Aircraft Mechanic you will be responsible for delivering rapid, high‑quality maintenance support for F‑35 airframes in dynamic, global environments. Your responsibilities will include: * Execute nose‑to‑tail maintenance on F‑35 aircraft, ensuring airworthiness and mission readiness. * Rapidly deploy to customer sites, often with less than 24‑hour notice, supporting pop‑up tasks worldwide. * Coordinate with the Interim Contractor Support infrastructure to integrate efforts and share expertise. Maintain a valid flight line driver competency card and meet all physical performance standards. * Document maintenance actions and provide clear feedback to stakeholders. What's In It For You We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus - if you have the passion and courage to pursue ambitious goals, work hard, and enjoy what you do, then we want to build a better tomorrow with you. Who You Are You are a collaborative, self‑starting Aircraft Mechanic with a proven ability to make timely decisions in high‑tempo environments. You thrive on solving complex maintenance challenges, enjoy frequent travel, and are committed to maintaining the highest safety and quality standards. Further Information About This Opportunity MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must possess an active Secret clearance to start. Physical requirements - regularly required to lift up to 50 pounds and perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and enter confined spaces. Basic Qualifications: * Must have 2-years of hands-on F-35 maintenance experience to include working experience and knowledge of Autonomic Logistics Information System (ALIS) to include, Anomaly Fault Resolution System, Customer Relationship Management, Joint Technical Data Navigation, Portable Maintenance Aid (PMA)/Maintenance Vehicle Interface (MVI) activities, Configuration Management and forms documentation and supply chain management activities. * Requires minimum of 4 years hands-on working experience in 5 or 7-skill level USAF AFSC, CDI/CDQAR Navy NEC, or CDI/CDQAR United States Marine Corps, or equivalent on Fighter Attack Aircraft. * Knowledge of Safety, Tool Control, Foreign Object damage (FOD), Supply, Hazardous Material (HAZMAT), Quality, and Security programs. * Willingness to accommodate a heavy travel schedule with very short notice (more than 50% travel). Desired Skills: * An FAA aircraft and Power Plant Mechanic license is desirable. * Proficiency with LM's F-35 Nose-to-Tail maintenance concept. * Low Observable/Structures Maintenance Experience. * Avionics Systems Maintenance Experience. Weapons/Egress Systems Maintenance Experience. Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: Non- standard 40 hour work week as assigned by leader Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Hourly/Non-Exempt Business Unit: AERONAUTICS COMPANY Relocation Available: Possible Career Area: Technicians Type: Full-Time Shift: Multiple shifts available

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. Night and weekend availability is required. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. Mechanics perform maintenance service on construction vehicles and large equipment and machines. What You'll Do * Maintenance and repair of small engines, both gas and diesel * Perform preventative maintenance work, such as checking oil and fluid levels on all equipment * Maintain inventory records on repairs made, parts ordered, and part inventories * Coordinate work with operations and maintains communication for scheduling repairs and PMs * Provide after-hours support for critical timelines when needed * Diagnose and correct electrical problems * Use of pneumatic tools for construction equipment * Perform other tasks as requested by leadership What You'll Have * High School Diploma or equivalent * General knowledge of construction related equipment * Existing CDL or ability/willingness to obtain Class A CDL What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training for technical skills * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Flexibility to work various schedules and stay late when necessary with little or no notice * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Phoenix

Join Chas Roberts Air Conditioning and Plumbing, a full-service contractor specializing in the design, construction, and maintenance of HVAC and Plumbing systems, as a Fleet Mechanic at one of our many Phoenix area locations. With over 82 years in the industry, we are seeking a qualified individual to inspect, diagnose, and maintain our fleet trucks and equipment. Responsibilities: - Inspect and diagnose fleet trucks and equipment. - Perform preventative vehicle maintenance. - Carry out all necessary repairs to fleet trucks and equipment. - Maintain vehicle reports and records. - Perform inventories for mechanic shop supplies. - Maintain a clean and organized shop. - Order parts as needed. - Handle some roadside calls. Requirements: - Minimum 3 years of related experience. - Clean 39-month MVR. - Must have own tools. - Ability to lift a minimum of 80 pounds. - Some travel required. Benefits: - Competitive wages - Paid Time-Off - Company-provided life insurance and short-term disability - Eligibility for medical, dental, vision, and additional life insurance - Company-sponsored 401(k) - Employee assistance program - Health savings account - Referral program Job Type: Full-time Pay: From $18.50 per hour Experience Level: - 3 years Schedule: - 8-hour shift - Day shift - Monday to Friday - Overtime Preferred Experience: - Diesel engine repair: 1 year - Mechanical knowledge: 1 year Work Location: In person Chas Roberts Air Conditioning Inc. is an Equal Opportunity Employer/Drug-Free Workplace.

For more than 50 years, Marsh Aviation has been a leader in engineering and innovation for performance and reliability-oriented aircraft upgrades and modifications. The company is known world-wide and specializes in repurposing existing airframes into modern, capable, efficient and cost-effective aircraft. Job Description Aircraft Mechanic The Aircraft Mechanic performs test, repair, installation, and modification on a variety of aircraft systems and structures. General duties include: Maintain, repair, and modify components including but not limited to structural, flight controls, hydraulics, pneumatics, fuel systems, and mechanical components; Able to perform a variety of diagnostic and mechanical duties on turboprop and piston multi-engine aircraft. Responsible for clear, concise and accurate reports in logs, inspection reports, and production documents. Qualifications Experience and Qualifications: FAA Airframe and Powerplant (A&P) certificate is required; Working knowledge of aircraft engines, mechanical systems, and components; Familiar with CFR parts 21 and 145; Able to read and understand approved manuals, Illustrated Parts Breakdowns, Airworthy Directives, Service Bulletins, and other technical service documentation; Working knowledge of 100 hour, annual, and progressive inspection procedures set forth in FAR 43; 10 years + aviation experience; High school diploma or equivalent; Successful candidates must be US Citizens or Permanent Residents. Additional Information All of your information will be kept confidential according to EEO guidelines. Marsh Aviation offers competitive pay and benefits; we invite you to learn more about the company at ********************** Marsh Aviation is an Equal Opportunity Employer.

Duties & Responsibilities: Airframe & Powerplant Mechanic The A&P Mechanic is responsible for performing scheduled and unscheduled maintenance of flight school aircraft. The mechanic will be accountable for completing all work in accordance with AeroGuard Company procedures and requirements, as well as all applicable regulatory requirements. This is a 5 day shift from 4:00 am to 2:30 pm. Responsibilities include but are not limited to: Must have strong interpersonal and team building skills. Must have excellent written and oral communication skills. Must have the ability to read and understand technical data such as maintenance manuals, parts catalogs, engineering drawings, service bulletins, and airworthiness directives. Must have knowledge of federal regulations relating to Title 14 parts 43 and 91. Assure that work areas are kept clean and organized. Must be able to be flexible and work all shifts on an as needed basis. REQUIREMENTS EDUCATION Airframe and Powerplant license required at the time of hire. EXPERIENCE A minimum of two recent and consecutive years of GA experience as a certificated A&P. Experience on Piper aircraft is preferred. G1000 experience is a plus. SKILLS AND ABILITIES Can work independently with the ability to make airworthiness decisions. Ability to manage workflow and adjust priorities as needed. Troubleshoot, repair, inspect, and perform maintenance on company aircraft in accordance with applicable technical data and FAA regulations. Will be required to make aircraft logbook entries and release aircraft for return to service. Must be familiar with Microsoft Office and able to learn Talon RMS computer maintenance program. Must have basic hand tools. EQUIPMENT/MACHINERY USED General office equipment such as facsimile, copier, personal computer, etc. Vehicle operation such as company van, truck, golf cart, aircraft etc. as required. Will require the use of various pieces of shop equipment and tools. Exposure to solvents, aviation gasoline, etc. PHYSICAL AND SAFETY REQUIREMENTS Will be working in many environments inside and outside of the facility. Will have extensive exposure to aircraft, simulators, outside conditions and equipment. May have some medium lifting up to 50 lbs. May require prolonged periods of sitting or standing, bending and stooping. OTHERS Extreme attention to detail. Self-starter does not wait for others to provide work, finds ways to keep busy or help others. Flexible/adaptable to fast changing pace and instructions according to flight school priorities. Job Type: Full-time Salary: $35.00 - $40.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Retirement plan Vision insurance Schedule: 8 or 10-hour shift Day shift Night shift Ability to commute/relocate: Chandler, AZ 85286: Reliably commute or planning to relocate before starting work (Preferred) Education: High school or equivalent (Preferred) Experience: Aircraft maintenance: 2 years (Preferred) License/Certification: Airframe & Powerplant License (Required) Work Location: In person

CARZ R US LLC is a trusted local shop dedicated to providing reliable, high-quality automotive service. We pride ourselves on honest work, excellent customer care, and keeping our community safely on the road. Job Description: We are looking for a skilled and motivated Automotive Mechanic to join our team. The ideal candidate will have experience diagnosing, repairing, and maintaining a wide range of vehicles. As an Auto Mechanic, you must have an in-depth understanding of all vehicle systems and components. You will also be responsible for maintaining repair shop equipment and preparing cost estimates. If youre passionate about cars and enjoy solving mechanical challenges, wed love to meet you! Responsibilities: Perform routine maintenance (oil changes, brakes, tune-ups, tire rotations, etc.) Diagnose and repair mechanical, electrical, HVAC issues Inspect vehicles, diagnose vehicles, and repair vehicles Keep detailed records of work performed Maintain a clean, safe, and organized work environment Qualifications: Proven experience as an automotive mechanic or technician Engine swaps, transmission swaps Good with timing, HVAC, and electrical systems Strong diagnostic and problem-solving skills Knowledge of automotive systems, tools, and repair techniques Must have own tools Valid drivers license ASE certification (preferred, but not required) What We Offer: Competitive pay based on experience Opportunities for advancement Supportive, team-oriented work environment Employee discounts on services How to Apply: If youre ready to put your skills to work, apply today! Submit your resume directly through Indeed or email it to [insert hiring email].

Maintains Forklift Trucks by completing preventive maintenance requirements; identifying and repairing or replacing faulty or suspect parts; identifying operating problems and resolution; test-driving vehicles; charging and maintaining batteries; filling propane tanks. ESSENTIAL FUNCTIONS: 1. Keeps forklift trucks operating by conducting periodic inspections; completing preventive maintenance requirements; identifying and repairing or replacing faulty or suspect parts. 2. Repairs forklift trucks by listening to operator description of malfunction; conducting tests; identifying operating problems and resolution; repainting vehicles. 3. Maintains vehicle maintenance and operational history by initiating and updating records. 4. Maintains safe, secure, and healthy forklift environment by adhering to organization standards and policies, and to legal regulations, alerting others regarding potential concerns. 5. Verifies forklift truck performance by test-driving vehicles. 6. Completes daily forklift truck preparations by charging and maintaining batteries, filling propane tanks. 7. Evaluates proposed forklift truck equipment by examining capabilities, conducting tests. 8. Improves forklift truck maintenance job knowledge by attending training sessions, reading technical publications. Contributes to forklift truck maintenance and organization success by welcoming related, different, and new requests; helping others accomplish job results Requirements EXPERIENCE REQUIREMENTS: Extensive knowledge in diagnostics, maintenance and repairing internal combustion engines and electric driven forklifts. Experience should include hydraulics, gas, diesel, propane, and electric powered equipment, including Yale, Hyster, CAT, Toyota, Nissan, Raymond, Crown, etc. EDUCATION REQUIREMENTS: High school diploma or GED Certifications/Licenses: Class B Commercial Driver's License, plus endorsements (Haz Mat optional)

_Casa Grande, AZ, USA_ | _AIS Infrastructure_ | _Salary_ | _125000-150000 per year_ | _Full Time_ _| BENEFITS We are dedicated to our employees' wellbeing and believe that every one of our employees has the right to work in an environment that is safe, welcoming, and inclusive. Because of this, we offer a competitive salary and comprehensive benefits package that includes: - Medical, Dental, Vision - 401k with a Discretionary Company Match & 100% Immediate Vesting - Company Paid Life and AD&D policy. (Voluntary Buy-up options) - Short & Long-Term Disability - Paid Time Off (PTO) - Paid Holidays - AND MORE!_ _ASRC Industrial, ("AIS"), and its Operating Companies will never ask job candidates for sensitive personal information (such as Social Security numbers, banking details, or payment of any kind) during the hiring process. If you receive unsolicited communications from individuals claiming to represent ASRC Industrial using non-official email addresses (e.g., not_ _from @_ _asrcindustrial.com), please report the message and do not engage. Official job postings can always be found on our website: asrcindustrial.com/careers/_ **ABOUT** The AIS Infrastructure Group consists of four heavy civil construction companies. Our services include infrastructure improvement, heavy civil construction, and site development for government and state agencies and private enterprise across the United States. We do a wide variety of large heavy civil projects, including highways, bridges, and DOT work, power plants, dams and reservoirs, underground utilities, site development, and more. **GENERAL POSITION SUMMARY** The Master Mechanic is responsible for overseeing and coordinating the maintenance and repair activities of the AIS Infrastructure fleet of vehicles and equipment. This position plays a crucial role in ensuring the smooth operation and reliability of the company's construction and industrial services projects. The Mechanic Foreman must possess a strong knowledge of vehicle and equipment mechanics and adhere to AIS Infrastructure's safety standards and protocols. **MAJOR DUTIES & RESPONSIBILITIES** + Supervise and coordinate the work of mechanics and technicians in the maintenance and repair of vehicles and equipment. + Plan and prioritize maintenance activities to ensure minimal downtime and maximum productivity. + Diagnose and troubleshoot mechanical, electrical, and hydraulic issues in vehicles and equipment. + Perform complex repairs and maintenance tasks on a variety of vehicles and equipment, including heavy machinery, trucks, and specialized construction equipment. + Reviewpreventive maintenance inspections to identify and address potential issuesbefore they cause equipment failure. + Maintainaccurate records of maintenance and repair activities, including parts usage, work performed, and equipment status. + Schedule maintenance with other AIS Infrastructure Mechanics/Technicians or appropriate equipment dealers. + Adhere to and enforce safety AIS Infrastructure safety protocol. **REQUIRED JOB SKILLS & ABILITIES** + Strong knowledge of vehicle and equipment mechanics, including engines, transmissions, hydraulics, and electrical systems. + Proficient in diagnosing and troubleshooting mechanical issues using diagnostic tools and equipment. + Ability to lead and supervise a team of mechanics and technicians effectively. + Excellent organizational and time management skills to prioritize tasks and meet deadlines. + Strong attention to detail and commitment to maintaining accurate records. **EDUCATION, KNOWLEDGE & EXPERIENCE** + High school diploma or equivalentpreferred. + Minimum of5years of experience in the heavy equipment maintenance industry. + Technical certification or degree in automotive orespeciallyheavy equipment mechanics is preferred. + In-depth knowledge of vehicle and equipmentmaintenancebest practices and industry standards. + Familiarity with diagnostic tools, equipment, and software used in vehicle and equipment maintenance. **WORKING ENVIRONMENT & CONDITIONS** + The Mechanic Foreman will primarily work in a well-equipped maintenance facility but may occasionally be required to work on job sites or in outdoor environments. + Potential hazards include working with heavy machinery, chemicals, and exposure to loud noises. + The job may involve physical demands such as lifting heavy parts, bending, kneeling, and standing for extended periods. + The work schedule may vary and may include weekends, evenings, or overtime as needed. + Limited travel may be required to visit job sites or attend training programs. **KNOWLEDGE, SKILLS & ABILITIES** + Proficiency in using computer software and diagnostic tools relevant to vehicle and equipment maintenance. + Excellent communication skills to effectively communicate with team members and supervisors. + Strong analytical and problem-solving skills to identify and resolve mechanical issues. + Attention to detail to ensure accurate diagnosis and effective repairs. + Ability to work independently as well as collaboratively within a team. + Strong customer service skills to interact with internal stakeholders and external clients. **PHYSICAL & MENTAL REQUIREMENTS** + Physical requirements may include lifting heavy parts (up to 50 pounds), bending, kneeling, and standing for extended periods. + The job may involve mental demands such as working under pressure, managing multiple priorities, and making quick decisions. + The Mechanic Foreman may be required to work in various weather conditions, depending on the job site location. **TRAVEL** + Travel to different project sites as needed. **OTHER DUTIES** Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. **B** **ENEFITS** We are dedicated to our employees' well-being and believe that every one of our employees has the right to work in an environment that is safe, welcoming, and inclusive. Because of this, we offer a competitive salary and comprehensive benefits package that includes: + Medical, Dental, Vision + 401k with a Discretionary Company Match & 100% Immediate Vesting + Company Paid Life and AD&D policy. (Voluntary Buy-up options) + Short & Long-Term Disability + Paid Time Off (PTO) + Paid Holidays + AND MORE! **H** **ISTORY** AIS Infrastructure is a wholly owned operating company of ASRC Industrial (AIS). AIS was founded in 2016 by Arctic Slope Regional Corporation (ASRC), an Alaska Native Corporation (ANC) established under the Alaska Native Claims Settlement Act of 1971. As part of an ANC, AIS Infrastructure is a Minority Business Enterprise. Their AIS BCSS group is also a certified 8(a) business, offering further contracting advantages to government agencies. These designations help clients meet their diversity spending objectives, while also providing sustainable returns for 13,600 Iñupiat shareholders. EEO Statement: AIS Infrastructure affords equal opportunity in employment to all individuals regardless of race, color, religion, sex, sexual orientation, gender identity, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law. AIS Infrastructure is an Equal Opportunity Employer.

ASRC Industrial, ("AIS"), and its Operating Companies will never ask job candidates for sensitive personal information (such as Social Security numbers, banking details, or payment of any kind) during the hiring process. If you receive unsolicited communications from individuals claiming to represent ASRC Industrial using non-official email addresses (e.g., not ************************), please report the message and do not engage. Official job postings can always be found on our website: asrcindustrial.com/careers/ ABOUT The AIS Infrastructure Group consists of four heavy civil construction companies. Our services include infrastructure improvement, heavy civil construction, and site development for government and state agencies and private enterprise across the United States. We do a wide variety of large heavy civil projects, including highways, bridges, and DOT work, power plants, dams and reservoirs, underground utilities, site development, and more. GENERAL POSITION SUMMARY The Master Mechanic is responsible for overseeing and coordinating the maintenance and repair activities of the AIS Infrastructure fleet of vehicles and equipment. This position plays a crucial role in ensuring the smooth operation and reliability of the company's construction and industrial services projects. The Mechanic Foreman must possess a strong knowledge of vehicle and equipment mechanics and adhere to AIS Infrastructure's safety standards and protocols. MAJOR DUTIES & RESPONSIBILITIES Supervise and coordinate the work of mechanics and technicians in the maintenance and repair of vehicles and equipment. Plan and prioritize maintenance activities to ensure minimal downtime and maximum productivity. Diagnose and troubleshoot mechanical, electrical, and hydraulic issues in vehicles and equipment. Perform complex repairs and maintenance tasks on a variety of vehicles and equipment, including heavy machinery, trucks, and specialized construction equipment. Reviewpreventive maintenance inspections to identify and address potential issues before they cause equipment failure. Maintainaccurate records of maintenance and repair activities, including parts usage, work performed, and equipment status. Schedule maintenance with other AIS Infrastructure Mechanics/Technicians or appropriate equipment dealers. Adhere to and enforce safety AIS Infrastructure safety protocol. REQUIRED JOB SKILLS & ABILITIES Strong knowledge of vehicle and equipment mechanics, including engines, transmissions, hydraulics, and electrical systems. Proficient in diagnosing and troubleshooting mechanical issues using diagnostic tools and equipment. Ability to lead and supervise a team of mechanics and technicians effectively. Excellent organizational and time management skills to prioritize tasks and meet deadlines. Strong attention to detail and commitment to maintaining accurate records. EDUCATION, KNOWLEDGE & EXPERIENCE High school diploma or equivalentpreferred. Minimum of5years of experience in the heavy equipment maintenance industry. Technical certification or degree in automotive orespeciallyheavy equipment mechanics is preferred. In-depth knowledge of vehicle and equipmentmaintenancebest practices and industry standards. Familiarity with diagnostic tools, equipment, and software used in vehicle and equipment maintenance. WORKING ENVIRONMENT & CONDITIONS The Mechanic Foreman will primarily work in a well-equipped maintenance facility but may occasionally be required to work on job sites or in outdoor environments. Potential hazards include working with heavy machinery, chemicals, and exposure to loud noises. The job may involve physical demands such as lifting heavy parts, bending, kneeling, and standing for extended periods. The work schedule may vary and may include weekends, evenings, or overtime as needed. Limited travel may be required to visit job sites or attend training programs. KNOWLEDGE, SKILLS & ABILITIES Proficiency in using computer software and diagnostic tools relevant to vehicle and equipment maintenance. Excellent communication skills to effectively communicate with team members and supervisors. Strong analytical and problem-solving skills to identify and resolve mechanical issues. Attention to detail to ensure accurate diagnosis and effective repairs. Ability to work independently as well as collaboratively within a team. Strong customer service skills to interact with internal stakeholders and external clients. PHYSICAL & MENTAL REQUIREMENTS Physical requirements may include lifting heavy parts (up to 50 pounds), bending, kneeling, and standing for extended periods. The job may involve mental demands such as working under pressure, managing multiple priorities, and making quick decisions. The Mechanic Foreman may be required to work in various weather conditions, depending on the job site location. TRAVEL Travel to different project sites as needed. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. BENEFITS We are dedicated to our employees' well-being and believe that every one of our employees has the right to work in an environment that is safe, welcoming, and inclusive. Because of this, we offer a competitive salary and comprehensive benefits package that includes: Medical, Dental, Vision 401k with a Discretionary Company Match & 100% Immediate Vesting Company Paid Life and AD&D policy. (Voluntary Buy-up options) Short & Long-Term Disability Paid Time Off (PTO) Paid Holidays AND MORE! HISTORY AIS Infrastructure is a wholly owned operating company of ASRC Industrial (AIS). AIS was founded in 2016 by Arctic Slope Regional Corporation (ASRC), an Alaska Native Corporation (ANC) established under the Alaska Native Claims Settlement Act of 1971. As part of an ANC, AIS Infrastructure is a Minority Business Enterprise. Their AIS BCSS group is also a certified 8(a) business, offering further contracting advantages to government agencies. These designations help clients meet their diversity spending objectives, while also providing sustainable returns for 13,600 Iñupiat shareholders. EEO Statement: AIS Infrastructure affords equal opportunity in employment to all individuals regardless of race, color, religion, sex, sexual orientation, gender identity, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law. AIS Infrastructure is an Equal Opportunity Employer.

Details: Purpose and Scope: The Ultra Care Technician I is responsible for performing regularly scheduled maintenance of industrial batteries and related products at the client site. Details: Responsibilities: Represents the company in a neat and professional manner in accordance with company standards. Practices safety and good housekeeping in all circumstances. Performs battery inspections, battery watering, battery washing, and full-scale inspection including recording of cell voltages and specific gravities. Performs watering system installations. Conveys information to proper customer contacts. Safely operates a service vehicle and keeps it in good working order. Operates a forklift and reach truck on a regular basis. Recognizes and addresses safety and EPA issues. Safely and correctly processes non-potable water recovered by the battery wash. Tests for and analyzes results of acidity level of water (pH). Performs voltage testing and pressure washing of battery. Maintains an accurate assigned parts inventory. Actively promotes point of sale items and allied products and services. Follows assigned schedule to ensure regular product maintenance. Complies with company policies and procedures (regarding issues such as warranty, safety, environmental, OSHA, and hazmat). Ensures work orders are filled out properly and submitted in a timely manner. Establishes and maintains good working relationships with customers. Communicates with others (supervisor, company technicians or other departments, as needed), to coordinate necessary repairs or either resolve customer complaints or seize opportunities. All other duties as required. Skills / Other: Able to read and comprehend documents, such as safety rules, operating and maintenance instructions, plus procedural and technical manuals. Able to interpret and follow instructions (provided in written, oral, diagram, or schedule form). Able to prioritize work, work independently, and move from task to task. Analytical and critical thinker. Detail-oriented. Troubleshooting skills, able to define problems and solve them. Strong customer service skills, including active listening. Solid organizational skills. Deadline-driven, self-motivated. Class A CDL required Experience: 1-3 Years of experience involving battery industry or related experience, preferably within a field service environment. Prior sales or customer service in a field service environment, strongly preferred. Pay: $30/hr#MCTA1

Are you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology? Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies. They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC. What's in It for You: Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA. A Glimpse into the Life of an Aircraft Technician / A&P Mechanic: As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows. Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today! This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.