Mechanic jobs in Savannah, GA

Description & Requirements Shape the future of defense with MANTECH! Join a team dedicated to safeguarding our nation through advanced tech and innovative solutions. Since 1968, we've been a trusted partner to the Department of Defense, delivering cutting-edge projects that make a real impact. Dive into exciting opportunities in Cybersecurity, IT, Data Analytics and more. Propel your career forward and be part of something extraordinary. Your journey starts now-protect and innovate with MANTECH! MANTECH seeks a motivated, career and customer-oriented Mechanic Technician to join our vehicle sustainment team in Fort Stewart, Georgia. The selected candidate will provide logistics support to the Allied Logistics Engineering Capabilities Sustainment (ALECS) program. Responsibilities include, but are not limited to: Repairs, rebuilds, or overhauls major assemblies of internal combustion automobiles, buses, trucks, or tractors. Replacing worn or broken parts such as piston rings, bearings, or other engine parts; grinding and adjusting valves; rebuilding carburetors; overhauling transmissions; and repairing fuel injection, lighting, and ignition systems. Maintenance support includes operations, system troubleshooting, engineering, design, installation, analysis, maintenance and repair of U.S. systems and subsystems to component level. Effectively applies industry or military standard troubleshooting procedures to localize and isolate faulty system components. Performs other related duties as assigned. Minimum Qualifications: 3+ years of qualified mechanical experience. Proficient with a variety of hand tools, diagnostic tools, power tools, multi-meters. Experience effectively applying industry or military standard troubleshooting procedures to localize and isolate faulty system components. Ability to successfully pass a Pre-Employment Drug Screening; must possess a Valid Driver's License for the location in which the work will be performed, and a High School Diploma or GED. Clearance Requirements: Must be a US Citizen and be able to obtain and maintain a Public Trust clearance prior to starting this position. Physical Requirements: Must be able to push, pull, and reach. Must be able to work in high noise areas. Must be able to lift 50lbs and small parts. Must be able to work with computers and CRTs, and type on a computer keyboard for long periods of time. MANTECH International Corporation considers all qualified applicants for employment without regard to disability or veteran status or any other status protected under any federal, state, or local law or regulation. If you need a reasonable accommodation to apply for a position with MANTECH, please email us at [email protected] and provide your name and contact information.

A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including: • Observing and assisting in installing and repairing auto glass • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing • Providing additional services & products • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques. • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday. • Performs other duties as assigned • Complies with all policies and standards What you'll get: • Competitive weekly pay starting at $20.25/hour, increasing to $24/hour after training and certification. • Earn $5/set of wiper blades when added for customer safety. • Potential to be promoted in your first year! Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction. • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days. • Program to buy additional PTO or sell unused time up to 16 hours. • Up to $5,250 annually in tuition reimbursement. • Paid training and all the tools and resources you'll need to be successful. • View all our health, wealth, and life offerings at ************************* Education Qualifications • High School Diploma GED/Equivalent Preferred • Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds. • Ability to stand for extended periods, work in tight spaces, bend and twist body • Ability to use a variety of hand tools and power tools safely and effectively • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting” • Ability to work scheduled days, with flexibility on start and end times to accommodate customer's needs • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues • Problem-solving and ability to trouble-shoot issues, independently and collaboratively • Ability to read, write and interpret the English language and technical directions • Ability to communicate orally (via phone) and written (via computer or other electronic means) • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we're proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability.

*For a quick application text APPLY1 to 82174* *About Dent Wizard* Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. *About Dent Wizard* Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. *Interior Repair Technician - No Experience Needed!* Location: Savannah, GA and Bluffton, SC (local daily travel required) Training: Fully Paid (Includes Travel, Food, and Transportation) Are you detail-oriented and enjoy making things look brand new? Do you enjoy working with customers and being on the move? Join our growing team as an Interior Repair Technician and start a rewarding career-no experience required! What You'll Do: * Travel to customer locations (dealerships, auctions, and more) to perform mobile interior repairs * Repair rips, tears, burns, stains, and other cosmetic damage in vehicle interiors * Mix dyes and restore surfaces to like-new condition * Build strong customer relationships and promote our services What We're Looking For: * Strong customer service and communication skills * Detail-oriented with a passion for quality and precision * Comfortable working outdoors in various weather conditions * Manual dexterity for repetitive-motion tasks * Self-motivated with the ability to work independently * Physical ability to kneel, bend, squat, and lift up to 15 pounds * Vision abilities including close, distance, color vision, depth perception, and focus adjustment * Valid driver's license and a good driving record What We Offer: * *No experience necessary - *we provide comprehensive, paid training (includes travel and lodging) * *Unlimited, uncapped earning potential - the harder you work and the more you master your craft, the more you can make* * *Excellent benefits - *medical, dental, vision, 401(k), paid vacation, and more * *Awesome perks - *tools and supplies, company vehicle, gas card, mobile phone, and more * *Cross-training opportunities - *learn to become a Key or Wheel Tech and boost your income * *Independence - *manage your day without micromanagement * *Supportive team - *work with a fun, dynamic crew that's got your back * *Career growth - *advance to higher Tech levels or management roles Commission-based uncapped earning potential. First year earning potential: $50,000-$65,000 Long-term earning potential: $60,000-$110,000+ The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $50,000-$110,000/year We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies [Benefits Highlights Booklet]( *EOE Statement: *Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at ...@dentwizard.com.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems has an opening for an **Aircraft Mechanic 3** **- Power Line** to join our team of qualified, diverse individuals within our Aircraft Solutions Business Unit at **MCAS Beaufort** . Your Mission will be to support O-Level maintenance on the F-35. **Your duties and responsibilities include (but are not limited to)** **:** + **You will be subject to work first, second, third, or weekend shift, as directed by the Aircraft Maintenance Manager.** + **You must be able to depart on temporary duty assignments- on short notice. The individual will practice good housekeeping and follow safety procedures and ensure both programs are enforced** . + You will perform Maintenance, Repair, Launch, and Recovery activities on F-35 aircraft. + You will ensure aircraft are in exceptional mechanical condition and safe for flight by performing maintenance, inspections, and servicing requirements on all aircraft systems in accordance with JTD and all applicable program and service guidance. + You will perform and/or assist with Field-Level Modifications and TCTD maintenance actions. + You will assist with OJT training for team members and partner aircraft maintenance personnel. + You will maintain and update aircraft records and status within the Computerized Maintenance Management System (CMMS) of ALIS. + You will keep the production staff updated on aircraft status. + You will perform other duties as assigned by the Aircraft Maintenance Manager. + You will perform required Airframe and Power Plant General (APG) / Airframes tasks as part of F-35 Contractor Logistics Support (CLS) performing organizational-level modifications. + You will use your training, knowledge, and experience to obtain special certifications (example: confined space, borescope, etc.) as locally required. + **Willing/able to provide temporary support to our other CLS locations and/or emerging deployments.** + **Willing/able** **to work a flexible work schedule that may include extended shifts, holidays, and weekends and support on call status for 24 hours-a-day, 7 days-a-week, 365 days a year.** + Must have the ability to obtain Collateral Duty Inspector Qualification within 18 months of position start date. + Must have the ability to acquire and maintain a flightline driver's competency card. **Maintenance tasks include** : + Configuring aircraft for modifications, removal, and installation of attaching hardware, component removal and installations, assistance with software uploads, various system operational checkouts, and egress system maintenance. **Technical requirements include** : + Fault isolation, troubleshooting, and repair of system failures detected during operational checks associated with modifications and restoration of aircraft to flying condition after accomplishment of modifications and maintenance. Interprets and uses various test equipment and works from wiring diagrams, engineering drawings, job guides, and maintenance manuals. **Basic Qualifications** **:** + Must have a High School diploma or GED and 4 years additional education and/or experience with mechanical/aircraft airframe/power plants/turboprop/egress/avionics and/or crew chief experience. + Must have the ability to read and interpret technical data and blueprint drawings. + **Must have an active DoD Secret or higher clearance (with a background investigation completed within the last 6 years or currently enrolled into Continuous Evaluation).** + **Must have the ability to obtain and maintain Special Access Program (SAP) clearance within a reasonable period of time, as determined by the company.** + **Must be able to perform moderate strenuous physical and repetitious work to include bending, stooping, kneeling, lifting item weighing up to 50 pounds, and working overhead.** + **Must be able to access small, confined spaces and work in an enclosed environment.** + **Must be able to pass a New Hire Physical prior to start.** + **Must have the ability to pass medical/respiratory evaluation to obtain and maintain necessary respirator clearance and compliance with all respirator fitting requirements.** **Preferred Qualifications** **:** + US Navy or Marine Corps CDI, Air Force 5 or 7 Level, or equivalent Airframe and Power Plant (A&P) Certification. + Six or more years F-22 or F-35 Power Line and/or Crew Chief Experience. + U. S. Navy or U. S. Marine Corps experience with thorough understanding of F-35 Fighter Aircraft Systems and operations under COMNAVAIRFORINST 4790.2 and 4790.35. + F-135 Power plant engine run certification, F-35 avionics systems, fighter aircraft crew escape systems (i.e., canopy and ejection seat), experience in structural repairs and low observable system maintenance are highly desirable. + Demonstrated communication skills and experience in a Military-focused Customer Service-Related Industry. Primary Level Salary Range: $55,800.00 - $93,000.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: * Travel privileges on the American Airlines global network * A generous vacation plan designed to let you enjoy your travel perks * 401(k) with company match * American Airlines Group (AAG) profit-sharing and bonus opportunities * A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network * Premium dental coverage * Vision plan options provided, including a plan that covers both glasses and contacts every year * Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services * Access to 24-hour virtual urgent care services * Family planning and fertility treatment * LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning * Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children * Flexible Spending Accounts for both Health Care and Dependent Care services * Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities * Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. * Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. * Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. * In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. * Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. * Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. * Assure that hangar workshops and other areas assigned are maintained in an orderly manner. * Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. * Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required * Current FAA Airframe and Powerplant certification. * High school diploma or equivalent. * Valid, state-issued Driver's License. * Capable of using respirators and other personal protective equipment including eye and hearing protection. * Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. * Must be able to speak, read, and write in English. * Must be able to demonstrate authorization to work in the U.S. Preferred * Previous experience with CRJs. Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law.Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

is $29.55 per hour We are Wayfair; we deliver a best-in-class customer experience in the furniture and home space because of people like you, who are driven, determined, collaborative, and thrive in a fast-paced environment. In order to maintain our high level of delivery standards and meet our customer's needs, the Wayfair Distribution team plays a key role in improving customer satisfaction and driving repeat business. We've been busy building a best-in-class logistics network that allows us to delight customers by speeding up deliveries, adding services, and reducing damage using our own physical, asset-based warehouses. We are looking for talented hard-working individuals to join our growing team - your professional home awaits you at Wayfair! The Maintenance Mechanic I will be a highly self-motivated, customer-centric, team player which possesses basic carpentry, mechanical, electrical and janitorial experience to assist in day to day operations. Shift * Wednesday - Saturday 6:00am - 4:30pm Benefits (Start Day 1!) * $1.50 per hour Shift premium for hours worked between 6:00pm - 6:00am * Referral bonuses * Overtime hours & pay * 401(k) with company match with company match * Wayfair company discount * Benefits start day one * Growth opportunities (Conversions, Promotions, and more!) What You'll Do * Work with supervision to troubleshoot basic conveyor material handling systems, electrical, plumbing, mechanical, and fire protection systems * Responsible for projects related to facilities as directed by the Supervisor * Work regularly on aerial platform lifts, boom/snorkel lift, and powered industrial trucks (reach, order picker, stand up, pallet runners, stock chaser, etc.) * Complete work orders, records, logs and other written or computer-based documents * Responsible for keeping and maintaining tools, supplies, and a clean, organized work area What You'll Need * Minimum 1 year experience in industrial maintenance or relevant certification(s) * Experience with basic carpentry including painting, drywall, cleaning and basic maintenance * Proficient using hand & power tools and electrical testing equipment including PLC systems * Proficient using computer systems and CMMS software * Experienced safely using warehouse equipment such as order pickers, pallet jacks, forklifts and aerial lifts * Will be required to wear applicable personal protective equipment including arc flash protection and safety shoes * Ability to regularly bend, lift, stretch, crawl and reach, engage in full manual dexterity in both hands and wrists and stand and walk for long periods * Must be comfortable repeatedly lifting up to 75 lbs unassisted * Ability to access all areas of the building by climbing ladders and gangways safely and without limitation * Ability to work in a non-climate controlled environment that can be noisy and have a low lighting levels * Follow all company safety policies, procedures, and guidelines * Ability to work independently, as part of a team and take direction * Must be a safety conscious, motivated, detail oriented, self-starter with a positive attitude * Must be flexible on working hours and willing to work scheduled & unscheduled overtime Assistance for Individuals with Disabilities Wayfair is fully committed to providing equal opportunities for all individuals, including individuals with disabilities. As part of this commitment, Wayfair will make reasonable accommodations to the known physical or mental limitations of qualified individuals with disabilities, unless doing so would impose an undue hardship on business operations. If you require a reasonable accommodation to participate in the job application or interview process, please let us know by completing our Accomodations for Applicants form. Need Technical Assistance? For more information about applying for a career at wayfair, visit our FAQ page here. About Wayfair Inc. Wayfair is one of the world's largest online destinations for the home. Whether you work in our global headquarters in Boston, or in our warehouses or offices throughout the world, we're reinventing the way people shop for their homes. Through our commitment to industry-leading technology and creative problem-solving, we are confident that Wayfair will be home to the most rewarding work of your career. If you're looking for rapid growth, constant learning, and dynamic challenges, then you'll find that amazing career opportunities are knocking. No matter who you are, Wayfair is a place you can call home. We're a community of innovators, risk-takers, and trailblazers who celebrate our differences, and know that our unique perspectives make us stronger, smarter, and well-positioned for success. We value and rely on the collective voices of our employees, customers, community, and suppliers to help guide us as we build a better Wayfair - and world - for all. Every voice, every perspective matters. That's why we're proud to be an equal opportunity employer. We do not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, genetic information, or any other legally protected characteristic. Your personal data is processed in accordance with our Candidate Privacy Notice (***************************************** If you have any questions or wish to exercise your rights under applicable privacy and data protection laws, please contact us at *********************************.

Required Skills- High School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred. Q-stamp preferred. In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members. Principle Duties and Responsibilities: Essential Functions: 1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft 2. Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule 3. Rivet structural members, assemblies and parts using all tools required to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures 4. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents 5. Check all work and ensure a defective free assembly prior to final inspection 6. Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems 7. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) 8. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information 9. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity 10. Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required Additional Functions: 1. Participate in continuous improvement activities 2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use 3. Ensure standard operating procedures are followed when operating ground support equipment 4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags 5. Ensure accurate daily job charging to the aircraft 6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership Perform other duties as assigned. Other Requirements: 1. Basic computer and basic shop math skills 2. Read and comprehend basic documents and instructions and read a scale 3. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules 4. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment 5. Ability to work with composite resins and materials 6. Must be able to work any shift 7. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs

Job Title Diesel Service Apprentice / Mechanic Business Function Service Branch Name MHC Kenworth-Savannah Date 08-27-2025 Address 5622 Highway 21 North City Savannah State GA Job Overview & Essential Functions Murphy-Hoffman Company, LLC is North America's largest Kenworth truck dealership group and leasing group. As MHC continues to grow, we have an opening for a Diesel Service Apprentice / Mechanic. The role of the Diesel Service Apprentice / Mechanic performs light maintenance work under close supervision. First stage of training for Service Technician status. * Performs maintenance type work (i.e. preventive maintenance, pre-delivery inspections, light electrical repairs, etc.) under supervision. * Assists Service Technician in heavy-duty truck repair. * Attends training sessions to gain knowledge and experience. * Maintains a neat and orderly work area and properly handles company tools. * Performs other duties as assigned by a supervisor. SAFETY-SENSITIVE This position has been designated as a safety-sensitive position. Any person performing the position while under the influence of marijuana or any other illegal drug may constitute a threat to health or safety or in which a lapse of attention could result in injury, illness, or death, including without limitation a position that includes the operating, repairing, maintaining, or monitoring of heavy equipment, machinery, aircraft, motorized watercraft, or motor vehicles or handling of hazardous materials and/or waste as part of the job duties. Qualifications * Performs maintenance type work (i.e. preventive maintenance, pre-delivery inspections, light electrical repairs, etc.) under supervision. * Assists Service Technician in heavy-duty truck repair. * Attends training sessions to gain knowledge and experience. * Maintains a neat and orderly work area and properly handles company tools. * Performs other duties as assigned by a supervisor. Benefits * Competitive Salary * Medical, Dental and Prescription Insurance * Disability and Life Insurance * Paid Time Off program * 401k and Profit Sharing with Employer Match * Flexible Spending Account * Internal Promotion Opportunities * On the Job Training About Us MHC is an expansion of the original company, Ozark Kenworth, Inc. Ozark Kenworth started in Springfield, Missouri, in January 1975. Opening for business without a Parts or Service department and only three employees in a temporary facility. From there, the company grew and expanded. MHC is now a multi-state network of full-service diesel truck dealerships, leasing and rental operations, transport refrigeration locations, and a finance company which offers a complete array of finance and insurance services. We believe in fostering an environment that helps employees realize their full potential - a place where you can grow as a person and a professional. Equal Opportunity Employer / Veterans / Disabled

The Mechanic travels to various company yards to repair stationary and mobile equipment. SA Recycling proudly supports the military community. Including, but not limited to: • Drive company mechanic truck to pick up parts and help trucks when issues arrive off site. • Trouble shoot problems with machinery • Repair engines, engine-cooling systems, drivetrain parts, brake systems, and basic electrical parts • Remove and replace parts of hydraulic systems and tool attachments (shears, forks, grapples) • Remove and repair some body parts, ladders, platforms, catwalks, and engine covers • Perform limited torch cutting and welding •Clean up work area at the end of shift • Keep work areas neat and orderly • Regular attendance and punctuality are essential job functions • Organizing materials to have more effective use of space • Dispose of various waste materials in the appropriate manner •Inspection to ensure cleanup is completed • Effective housekeeping in workplace area is an ongoing operation for safety and better hygienic conditions for all team members. Qualifications • Employees in this position prior to April 2014 are presumed to be qualified and are "grandfathered" into their positions. • Must pass a medical physical and drug test • Must pass a background check • Preferred - high school diploma or GED and/or foreign education acceptable •Bi-lingual (English & Spanish) language skills a plus • Ability to: communicate with others effectively; understand direction (written or oral) and use basic math skills as the job demands • Diesel Mechanic school or certification preferred • Previous experience hydraulic repairs a plus • Forklift experience a plus Job Expectations Comply with all applicable federal, state, local, & SA Recycling safety, health, & environmental rules, regulations, policies, & procedures. Physical Requirements • Work Environment: Scrap yard, large equipment metal processing area • Equipment & Tools: Yard equipment, electrical Safety equipment, hand tools, and PPE specialized for electricians. • Physical Demand Level: Moderate, • Work Capacity: Mechanic Work Capacity • Sensory Demands: Hearing, vision, smell, touch and taste • Hand Movements: Repetitive motions, gripping, twisting SA Recycling offers: Competitive Pay Choice of 2 Medical plans, with Dental, Vision, and Life Insurance 401k with a Company Match Weekly Pay Referral Incentives Company provided uniforms and PPE Eligible for Safety and Profitability Bonuses PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. An offer of employment by SA Recycling is contingent on the satisfactory completion of a post-offer drug screen, physical exam, and background check with a credit check (if position specified). All US applicants must be 18 years of age or older.

Tico is hiring Mechanics, All Skill Levels /All Shifts at our site in Savannah, Georgia. This position is typically an 8-hour shift, with occasional overtime. Great pay, benefits, sign on bonus and lots of room for growth! 95% of our fleet are trucks we build at our plant in Ridgeland S.C. They all have the same power package and driveline . They are mirror images of each other, less for a mechanic to have to learn to become proficient and…... we can train the right candidate! Responsibilities: Conducts safety checks on vehicles and equipment. Performs inspection, diagnosis and repair of electrical, hydraulic, suspension, A/C, steering, cooling, DPF, brake and air systems on vehicles and equipment. Performs repairs and assigned preventive maintenance services. Ability to utilize computer software diagnostic systems to interpret failure modes to initiate or assign repairs. Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times. Reviews, completes, or assigns repairs. Performs maintenance related work as required. Maintains a clean, safe work area in compliance with corporate and OSHA standards. Performs all work in accordance with established safety procedures. Effectively communicate needed repairs or tasks. Performs other duties as assigned. The ideal candidate will possess preferably 2+ year experience in either/or: Heavy truck repair Heavy, medium duty or farm equipment repair. Forklift or construction equipment repair. Automotive maintenance and repair. Completion of a diesel or automotive tech program. Good attitude, willingness to learn, and strong work ethic is a preferred quality. Must maintain your own tool set (company provided tool program available.) We offer excellent benefits including medical, dental, vision, flexible spending account, long term disability, life insurance, 401K retirement and opportunity for advancement. For more information, please visit ********************* or call ************. Tico is an Equal Opportunity Employer

JOIN OUR HISTORIC TOURS OF AMERICA FAMILY This position ensures that the image of our company is reflected in appearance and condition of our equipment and facilities. You are to maintain the company's high standards of safety. The Mechanic's Helper's responsibilities include but are not limited to: Performing routine preventative maintenance on vehicles such as change oil, check batteries, lubricate equipment and machinery, repair and install tires while maintaining a safe working environment. Assist mechanics with repairs as needed. Employee Benefits Competitive pay and paid training: $20 per hour All FT Employees are eligible for 2 weeks of paid vacation time as well as company sponsored health and wellness plans All FT, PT and Seasonal employees are eligible for: Paid sick time, 401K plan with company matching*, fun and upbeat work environment with various award and recognition celebrations throughout the year, First Stop Health - 24 hr. access to doctor by phone or computer for employee and their dependents (Employer pays 100%), discounts in retail stores, and free admission to all company attractions Operating tours, attractions and retail in Boston, Charleston, Key West, Nashville, San Diego, St. Augustine, Savannah, San Antonio, and Washington, DC since 1980! Start your new Career With Us Today! *Eligibility requirements may apply Essential Functions Perform routine, preventative maintenance such as change oil, check batteries, and lubricate equipment and machinery Assist mechanics with repairs Follow procedures to fuel and park CDL required vehicles. Drive and fuel on company property only. Repair and/or install tires. Maintain a safe working environment, place unused tools and equipment in designated areas. Required Knowledge, Skills and Abilities Ability to drive in a safe, competent manner a vehicle that is 27 feet to 40 feet in length on company property. Ability to watch gauges, dials, or other indicators to make sure a machine is working properly. Shall be able to read, write and speak fluent English in order to communicate with fellow CASTmembers and the general public. Ability to handle stressful situations and difficult people both in person and via the radio while maintaining a professional and pleasant demeanor. Shall be able to work evenings, weekends and holidays. Ability to work in cramped spaces and under a vehicle while lying on your back , lift, lower and carry items that typically weigh 25 - 50 pounds without assistance and 75 pounds with assistance, varying distances. Qualifications High school graduate or equivalent preferred. Mechanical background helpful. Other Requirements Must supply own hand tools and toolboxes. Tools must meet or exceed minimum tool list. Valid Driver's License with an acceptable driving record for the past three years. Successful candidate must pass a background search

The AH64 Aircraft Mechanic II performs Inspections, repairs and, modification tasks as directed. * Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. * Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. * Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. * Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. * Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. * Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. * Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration. * Perform other qualified duties as assigned. Minimum Requirements: * High School degree or equivalent required. * Valid up-to-date A&P license, Two (2) years aviation maintenance experience, Three (3) years rotary wing aircraft experience, and Two (2) years on the assigned (AH64) MDS. * If no A&P license, shall have Three (3) years aviation maintenance experience, Three (3) years rotary wing aircraft experience, and Two (2) years on the assigned (AH64) MDS. * All experience must be within the Five (5) most recent years. * Shall have a working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, ULLS-A(E) * Must be able to obtain and maintain facility credentials/authorization NAC-I T1 Public Trust. Note: US Citizenship is required for a facility credentials/authorization at the work location. Knowledge & Skills * Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. * Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, and micrometers. * Working knowledge of technical publications and Logistics Information Systems. * Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. * Participate in maintenance test flights and operation checks as required. * Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. * The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Physical Requirements/Working Environment * Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. * Must be able to climb stairs, ramps, ladders, and work stands. * Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. * May be required to lift heavy objects whose weight may exceed 50 pounds. * Must be able to type using a standard keyboard to communicate through e-mail and various software applications. * Will handle dirty parts and lubricants. * Will be required to wear proper Personal Protective Equipment (PPE). * Must be able to pass a Respirator Physical and Fit Test qualification. * May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. * Must be able to lift/push/pull minimum of 50 pounds. * May work in maintenance shop or outside. * Must be able to work in a shop where the environment is drafty, noisy, and dirty. * May be exposed to extreme noise from operating equipment. * May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. * May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

In a team-oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department. Principle Duties and Responsibilities: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensure parts/assembly meet FAA requirements, customer specifications, and Company standard of quality Rivet structural assemblies and parts, including Sheetmetal parts, using all tools required to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets) Read work orders, blueprints, lofts, sketches, and operation sheets to determine the sequence of operations, type size, and hole pattern for rivets. Check all work and ensure a defective-free assembly prior to the final inspection Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Use a resource planning system to enter daily labor against correct Work Order and Item numbers Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners Maintain a neat and orderly work area, support the company 5S Program, and comply with all safety regulations Work under moderate supervision on duties and tasks Support Lean Activities Additional Functions Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) Keep shop and aircraft work areas clean and uncluttered Properly care for and maintain shop equipment and tools as assigned by the Supervisor Comply with safety rules and procedures Perform other duties as assigned. Salary Range: $21-$22/hr Job Requirements: High School Diploma or GED required. 1 year related structural assembly experience. Experience working with Solumina and Smarteam preferred. One year experience credit considered for graduates of Savannah Tech Aircraft Structures Technical Certificate Program. Other Requirements: Basic knowledge of various aircraft structures, Sheetmetal, and fabrication processes Ability to read and interpret basic blueprints Read and interpret the 6" scale Basic computer skills Must be able to read a scale and perform basic shop math Read and comprehend basic documents and instructions Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules Must demonstrate good housekeeping and safety practices Ability to work with composite resins and materials Must be able to lift 50 lbs. Must be able to work any shift Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas Must be able to read, write, speak, and understand English language

Job DescriptionThe Bryan County Board of Commissioners is now accepting applications for a Full Time Mechanic in our Maintenance Shop Department. This position is to perform skilled and semi-skilled repairs and maintenance of automobiles, light and heavy-duty trucks and other gasoline and diesel equipment. The following duties are normal for this position. These are not to be construed as exclusive or all-inclusive. Other duties may be required and assigned. Performs skilled maintenance work including the repair, adjustment, and maintenance of motor vehicles and gasoline and diesel-powered construction equipment; changes oil, filters, and transmission fluid. Perform general overhaul work on internal combustion engines and all equipment components and accessories. Performs tune-ups of gasoline and diesel motors, adjusting timing mechanisms, carburetors, and fuel and ignition systems; replaces spark plugs and distributor caps. Adjust and realigns brakes; maintains hydraulic systems and electrical systems; assists in recharging and repairing air conditioning systems. Repair power mowers, air compressors and pneumatic accessories, pumps and related machinery, and small equipment. Installs and repairs vehicle scanners and radios; welds materials as needed; repairs and / or replaces tires. Picks up parts and supplies; maintains neatness and cleanliness of shop; cleans wash rack, changes fuel filter, and hose on steam cleaner. Assist with debris pick-up along roadways, posts road closing signs, cuts grass around shop, and performs other similar duties. Work is performed under direct supervision of the Maintenance Shop Superintendent or assigned supervisor. Performance is evaluated through observation and review of repairs performed. Punctuality and attendance are essential. Performs other related duties as required. MINIMUM QUALIFICATIONS: High school diploma or GED required; additional vocational training in automotive and engine repair preferred; one year of experience as automotive or engine mechanic, or a related field; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Must possess and maintain a valid Driver's License. Bryan County is an equal opportunity employer, and we endorse the Americans' Disability Act. Bryan County does not discriminate on the basis of race, color, sex, religion, national origin, age, or disability in any employment practice, educational program, or any other program, activity or service. Bryan County is a registered participant in the federal work authorization program commonly known as E-verify. Bryan County uses the program to verify employment eligibility of all new employees after the Employment Eligibility Verification Form (Form I-9) has been completed. E-Verify Number: 157957 Authorization Date: March 3,2010 E-Verify is a registered trademark of U.S. Department of Homeland Security

PENDING CONTRACT AWARD Task Description: Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Corrosion Control/Aircraft Painting/Low Observable Material Restoration Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Scheduled and unscheduled maintenance support for assigned F/A-18 and F-35 aircraft Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE) operation and inspections Aircraft inspections Aircraft movement Corrosion Control/Aircraft Painting/Low Observable Material Restoration Preservation and de-preservation General aircraft maintenance Low Observable Health Assessment System Data Entry Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. Preferred Qualifications: Six or more years' F/A-18 and or F-35 experience Eight or more years' aviation maintenance experience Familiarity and ability to use NAVAIR IETMS. Four or more years' experience with NALCOMIS/OOMA Basic Corrosion Control Course Advanced Corrosion Control Course/Paint and Final Finish Hydraulic Contamination Qualification Aircraft Engine/APU Qualification Aircraft Jacking Qualification Previously certified F/A-18 and or F-35 CDI/CDQAR Basic Qualifications: Four or more years' F/A-18 or F-35 experience Low Observable Paint Qualified Individual (I) Aircraft Maintenance Qualification Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able to work work-week schedules i.e. M-F, Sn-Th or as required per PWS Must be able to pass a background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance Secret security clearance Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to pass employment physicals Must be able to deploy to support off station exercises and perform other support duties if required Compensation $39.89/hour Other Compensation Employees will receive a health and welfare benefit of $2.65 for every hour worked. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks' paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: Travel privileges on the American Airlines global network A generous vacation plan designed to let you enjoy your travel perks 401(k) with company match American Airlines Group (AAG) profit-sharing and bonus opportunities A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network Premium dental coverage Vision plan options provided, including a plan that covers both glasses and contacts every year Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services Access to 24-hour virtual urgent care services Family planning and fertility treatment LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children Flexible Spending Accounts for both Health Care and Dependent Care services Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. Assure that hangar workshops and other areas assigned are maintained in an orderly manner. Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required Current FAA Airframe and Powerplant certification. High school diploma or equivalent. Valid, state-issued Driver's License. Capable of using respirators and other personal protective equipment including eye and hearing protection. Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. Must be able to speak, read, and write in English. Must be able to demonstrate authorization to work in the U.S. Preferred Previous experience with CRJs. Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms. Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law. Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

JOB TITLE: Aircraft Structural Mechanic III - 2nd Shift PAY RATE: $28.75/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Shift: Must be available to work any shift Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Perform a variety of complex structural assembly operations. This includes the use of prints, specifications, and tools to ensure assemblies meet quality standards and customer expectations. May also assist and guide other team members. Perform safe and accurate assembly of structural parts, sheet metal layouts, fabrication, and installations. Execute drilling, riveting, and fitting operations to meet design requirements. Use required tools including riveting guns, pneumatic drills, reamers, countersinks, and rivet shavers. Remove and replace fasteners without damaging structures. Read and interpret blueprints, work orders, sketches, lofts, and operation sheets. Follow procedures for working with adhesives, sealants, and solvents. Align and assemble components using jigs, fixtures, clamps, pins, and fasteners. Shape and form complex angles using proper tooling based on blueprints or verbal instructions. Perform repairs per DMTs, MRRs, and PCOs; ensure rework meets specifications. Verify work is defect-free prior to final inspection. Instruct and support team members with interpreting drawings and solving installation challenges. Maintain logs and records (e.g., MIR sheets, DMTs, PCOs, Crabs). Participate in continuous improvement and 5S/Lean initiatives. Properly use and maintain company tools and PPE. Ensure accurate job charging and effective shift handoffs. Requirements: High School Diploma or GED required Minimum 4 years of related structural assembly experience Experience with Solumina and SmarTeam preferred Q-stamp certification preferred Basic computer literacy and shop math skills Ability to read scales and comprehend technical documents Skilled in close tolerance work and use of specialized tools Ability to work in confined spaces, on ladders or stands, and lift up to 50 lbs Experience working with composite resins and materials Professional attitude, attention to detail, and ability to meet demanding schedules Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today! #jobad

The **AH64 Aircraft Mechanic II** performs Inspections, repairs and, modification tasks as directed. + Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. + Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. + Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. + Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. + Adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. + Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration. + Perform other qualified duties as assigned. **Minimum Requirements** : + High School degree or equivalent required. + Valid up-to-date **A&P license,** Two (2) years aviation maintenance experience, Three (3) years rotary wing aircraft experience, and Two (2) years on the assigned **(AH64)** MDS. + **If no A&P license** , shall have Three (3) years aviation maintenance experience, Three (3) years rotary wing aircraft experience, and Two (2) years on the assigned ( **AH64** ) MDS. + All experience must be within the Five (5) most recent years. + Shall have a working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, **ULLS-A(E)** + Must be able to obtain and maintain facility credentials/authorization**NAC-I T1 Public Trust. Note: **US Citizenship** is required for a facility credentials/authorization at the work location. **Knowledge & Skills** + Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. + Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, and micrometers. + Working knowledge of technical publications and Logistics Information Systems. + Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. + Participate in maintenance test flights and operation checks as required. + Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. + The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. **Physical Requirements/Working Environment** + Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. + Must be able to climb stairs, ramps, ladders, and work stands. + Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. + May be required to lift heavy objects whose weight may exceed 50 pounds. + Must be able to type using a standard keyboard to communicate through e-mail and various software applications. + Will handle dirty parts and lubricants. + Will be required to wear proper Personal Protective Equipment (PPE). + Must be able to pass a Respirator Physical and Fit Test qualification. + May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. + Must be able to lift/push/pull minimum of 50 pounds. + May work in maintenance shop or outside. + Must be able to work in a shop where the environment is drafty, noisy, and dirty. + May be exposed to extreme noise from operating equipment. + May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. + May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

PENDING CONTRACT AWARD Task Description: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various aircraft systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Corrosion Control/Aircraft Painting/Low Observable Material Restoration Responsibility: Performs requirements in accordance with the procedures established in the PWS. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Scheduled and unscheduled maintenance support for assigned F/A-18 and F-35 aircraft Aircraft maintenance action documentation via logs, records, forms, and electronic means Support Equipment (SE) operation and inspections Aircraft inspections Aircraft movement Corrosion Control/Aircraft Painting/Low Observable Material Restoration Preservation and de-preservation General aircraft maintenance Low Observable Health Assessment System Data Entry Perform general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment Perform shift work and/or overtime as required Perform other tasks as directed. Preferred Qualifications: Six or more years' F/A-18 and or F-35 experience Six or more years' aviation maintenance experience Familiarity and ability to use NAVAIR IETMS. Four or more years' experience with NALCOMIS/OOMA Basic Corrosion Control Course Advanced Corrosion Control Course/Paint and Final Finish Hydraulic Contamination Qualification Aircraft Engine/APU Qualification Aircraft Jacking Qualification Previously certified F/A-18 and or F-35 CDI/CDQAR Basic Qualifications: Four or more years' F/A-18 or F-35 experience Low Observable Paint Qualified Individual (I) Aircraft Maintenance Qualification Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able to work work-week schedules i.e. M-F, Sn-Th or as required per PWS Must be able to pass a background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance Secret security clearance Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to pass employment physicals Must be able to deploy to support off station exercises and perform other support duties if required Compensation $37.96/hour Other Compensation Employees will receive a health and welfare benefit of $2.65 for every hour worked. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees can enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks' paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets