Mechanical design engineer jobs in Albuquerque, NM - 127 jobs

Merrick & Company's High Performance Facilities (HPF) team is seeking an experienced Mechanical Facilities Engineer III to provide HVAC and Plumbing design for a wide range of national defense projects in our Albuquerque, NM office. From multi-building campuses to secure facilities across the globe, the Merrick HPF team designs and delivers sustainable solutions to meet Government needs for resiliency, readiness, and reliability. Our work directly impacts the operation and efficiency of installations vital to the protection and defense of the United States. Annual salary range for this position is $102,400.00 - $132,600.00. Base pay offered may vary depending on job-related knowledge, skills, and experience. WHAT YOU'LL DO The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: * Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. * Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. * Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. * Perform engineering quality assurance checks of project designs. * Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. * Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other Merrick offices or project site locations, including international travel, may be required. REQUIRED QUALIFICATIONS * Degree Requirements: Bachelor of Sciences in Mechanical Engineering. * Minimum eight (8) years of experience. * Professional Engineering (P.E.) License required. * Ability to obtain a Department of Defense security clearance. * Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). * Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). * Proficient in editing and writing mechanical construction and equipment specifications. * Proficient in Microsoft Word and Excel. * Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. * Working knowledge of ASHRAE, SMACNA, and NFPA standards. * Working knowledge of IMC, IPC, and IBC codes. * The client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS * LEED or Green Globes accreditation PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Degree Requirements: Bachelor of Sciences in Mechanical Engineering. * Minimum eight (8) years of experience. * Professional Engineering (P.E.) License required. * Ability to obtain a Department of Defense security clearance. * Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). * Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). * Proficient in editing and writing mechanical construction and equipment specifications. * Proficient in Microsoft Word and Excel. * Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. * Working knowledge of ASHRAE, SMACNA, and NFPA standards. * Working knowledge of IMC, IPC, and IBC codes. * The client projects for this position require U.S. Citizenship. The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: * Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. * Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. * Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. * Perform engineering quality assurance checks of project designs. * Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. * Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other Merrick offices or project site locations, including international travel, may be required.

Details: Job Title: Mechanical Design Engineer Focus: HVAC Design for DoD & Aerospace Facilities Schedule: Hybrid Salary: $100,000 - $132,000 (Pay offered may vary depending on job related knowledge, skills, and experience.) Client Overview: Our client's High Performance Facilities (HPF) team is seeking an experienced Mechanical Facilities Engineer to provide HVAC and Plumbing design for a wide range of national defense projects in their Albuquerque, NM office. From multi-building campuses to secure facilities across the globe, the HPF team designs and delivers sustainable solutions to meet Government needs for resiliency, readiness, and reliability. Our work directly impacts the operation and efficiency of installations vital to the protection and defense of the United States. WHAT YOU'LL DO The Mechanical Facilities Engineer III will design HVAC and Plumbing/Piping systems for an exciting range of mission critical to mission support projects. Project work will encompass: Plan, conduct, and coordinate detailed phases of HVAC and Plumbing design work with calculations, process flow diagrams, piping and instrumentation diagrams, layout of mechanical equipment and associated duct and piping systems, and sequences of operations. Develop mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. Evaluate, select, and apply standard techniques, procedures, and criteria to perform a task or sequence of tasks for projects with less complex features, but also collaborate and use judgment to determine adaptations in methods for non-routine aspects of assignments and more complex projects. Perform engineering quality assurance checks of project designs. Support new project proposals with mechanical discipline scopes, budget estimates, and schedules. Interface with and present designs to Federal, State, and Local government client contacts. The Mechanical Facilities Engineer III will be a key member of a multi-disciplinary team of architectural and engineering staff producing project design packages of drawings, specifications, and calculations. The position includes great leadership opportunity with task assignment and work coordination with engineers, designers, and administrative staff. Periodic travel to other offices or project site locations, including international travel, may be required. REQUIRED QUALIFICATIONS Degree Requirements: Bachelor of Science in Mechanical Engineering from an ABET Accredited Program is required. Engineering Technology degree will not be considered. Minimum eight (8) years of experience - MUST HAVE PE License required. Ability to obtain a Department of Defense security clearance. Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air-handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls). Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air-handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls). Proficient in editing and writing mechanical construction and equipment specifications. Proficient in Microsoft Word and Excel. Experience using HVAC computer load and design programs such as Trane Trace software; knowledge of Revit building information modeling software; and familiarity with AutoCAD. Working knowledge of ASHRAE, SMACNA, and NFPA standards. Working knowledge of IMC, IPC, and IBC codes. The client projects for this position require U.S. Citizenship. DESIRED QUALIFICATIONS Active Secret clearance with eligibility to obtain Top Secret with SCI LEED or Green Globes accreditation PERKS Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. Robust Employee Referral Program. Annual performance and compensation reviews. Professional Training and Development. Employee Recognition Awards. Peer Mentor Program And Much More! ADDITIONAL INFORMATION Competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). Equal Opportunity Employer, including disability/vets. Employment with this client is contingent upon successful completion of a pre-employment background check and drug screen. Please email me directly with your updated resume' and availability for a phone call @ ****************************** #INDG

Wilson & Company is currently seeking an experienced Mechanical Designer to assist our mechanical engineering and design team with a focus in heating, ventilation, air-conditioning (HVAC) and plumbing systems for commercial, institutional, governmental, and educational facilities. The ideal candidate will bring a strong understanding and background in building HVAC systems, plumbing systems, piping, process systems, control systems, PFD, and P&IDs. Roles and Responsibilities: Equipment selection, mechanical plan layout, cost estimating, coordination with other consultants and team members, and client interaction. Develop and design within a BIM design environment Assist in developing project technical standards, processes, and procedures Ability to take direction from the Engineer of Record (EOR) and complete projects within project schedules and assigned budgets Provide field observation reports of onsite analysis and consultation Collaborate with the internal and external project team to execute a project from concept to completion including meeting attendance, site visits, response to RFIs, submittal review and responses Maintain rapport with industry vendors and stay up to date on the latest mechanical system trends and solutions appropriate to building technologies and design/construction industry The candidate must have a working knowledge and familiarity with several mechanical design codes and software. Some of these may include: Codes and Standards: International Mechanical Code (IMC) International Plumbing Code (IPC) Uniform Mechanical Code (UMC) Uniform Plumbing Code (UPC) ASME Standards ASHRAE Standards Piping codes, B31.1, B31.3 National Fire Protection Association (NFPA) National CAD Standards (NCS) Software: Autodesk AutoCAD Engineering and construction software Revit Building Information Modeling (BIM) Microsoft Office software Bluebeam Revu Required Experience: Minimum of four (4) years mechanical design experience in the consulting engineering field Engineer Intern (EI) certificate from New Mexico SBLPES is a plus Experience with AutoCAD, Revit, and other design related software Significant mechanical and plumbing design experience Experience with federal projects is a plus Please note that Wilson & Company is not currently sponsoring applicants for work visas. Job Location: Albuquerque, New Mexico Annual Salary Range: $60,000 to $110,000+ (based on experience) About Us: For nearly a century, Wilson & Company, Inc., Engineers & Architects, has provided award-winning engineering, architecture, planning, environmental, surveying, geospatial, and construction management services. With employees across multiple offices in the Midwest, Southwest, Rocky Mountain, and Western regions in the United States, we bring people together to practice their craft, create value, and accomplish great things. Guided by our purpose, we help clients move from concept to completion, transforming unused spaces into productive places, underutilized facilities into efficient ones, and rural or urban challenges into achievable solutions. At Wilson & Company, we focus on your specific needs, delivering excellence with lasting Higher Relationships in mind. By employing our core values-discipline, intensity, collaboration, shared ownership, and solutions-we create genuine experiences and lasting connections for our clients, employees, and communities. We support our employees' success and well-being with a comprehensive benefits package, including options for health insurance, life insurance, disability coverage, paid time off, and retirement savings plans. We are proud to be an EEO employer and maintain a drug-free workplace, conducting pre-employment background checks. Join us and be part of a culture committed to helping you achieve personal and professional success.

Company Unirac is a national leader in the solar PV structural mounting industry. We enable our customers to power the world with clean, abundant energy by creating dependable, innovative mounting solutions. Unirac is a fast-paced work environment and is growing rapidly with many changes and new opportunities arising regularly. Job description Unirac is seeking a Product Development Engineer with a proven track record of bringing innovative solutions to market. Product development engineers at Unirac work as part of a multi-disciplinary team to develop products that delight our customers with a strong focus on innovation, manufacturability, and cost-control. PD engineers apply principles of engineering to evaluate new and existing products, utilizing state-of-the-art tools and physical testing methods. The Product Development Engineer serves as a technical lead, leveraging their experience to guiding engineering programs and initiatives from ideation through execution while meeting project schedule targets and product functional, performance, and cost requirement. Duties and Responsibilities Innovate, conceive, design, engineer and develop products and/or components to provide new or improved function, to enter new markets and/or reduce costs of legacy products, in accordance with documented product requirements. Engineer products in accordance with appropriate regulatory requirements and associated standards, such as model building and electrical codes, ASCE 7, aluminum or steel design manuals, ASTM standards, etc. Select appropriate materials for applications, considering strength, deflection, cost, finish, corrosion, friction, etc. Engineer products considering techniques such as design for manufacturability, assembly, reliability. Consider ergonomic factors in product design, and how a product will actually install in the field Provide system level costs for new products Develop product acceptance criteria and test plans. Document product designs, engineering, test results and engineering changes in engineering reports. Review and approve Unirac engineering and test reports for new product introductions Create and/or order prototypes in the conception and development of new products and document results in engineering and/or test reports Create presentations and present engineering designs and changes as required Coordinate, communicate, interact and provide technical support to other functional groups Investigate new technologies, tools and processes and make recommendations for adoption as appropriate Ensure goals, schedules, cost targets and budgets are met Provide leadership and guidance to members of the PD group and others as needed Provide mentorship as needed. Maintain working knowledge of customer requirements and competitor trends Provide business level strategic thinking / and guidance based on engineering experience and expertise. Requirements BS in CE, ME, ArchE or other as relevant or equivalent Minimum 2 years of experience in mechanical, or structural engineering or similar Knowledge related to products manufactured via one of more of the following processes; extrusion, roll forming, casting, injection molding, stamping or machining. General understanding of load calculations and structural engineering. Demonstrated expertise with engineering methods and tools including structural and/or mechanical engineering methods, CAD, Finite Element Analysis, , as well as office tools MS Project, Excel, PowerPoint, Word Experience working with Codes and Standards (International Building Code, National Electrical Code), and ability to effectively communicate with Nationally Recognized Test Laboratories and local Authorities Having Jurisdiction Desired Areas of Expertise Desired experience with residential, commercial and/or utility scale photovoltaic systems, product requirements and engineering processes, especially regarding system mounting structure Desired experience with photovoltaic module and racking certification requirements Desired subject matter expert / authority in at least one relevant technical subject (i.e Aluminum or Steel Design, Code, etc) Qualifications Skill Requirements At least 1 year of experience in mechanical, structural engineering or similar /8+ preferred 3 years new product development experience preferred Engineering analysis Structural design, strength and cost optimization, material selection, and FEA analysis Innovative, think creatively, be hands-on and mechanically inclined Ability to generate concepts and create physical, testable prototypes Expert proficiency in CAD and 3-D modeling, Inventor preferred Comfortable with hand tools and familiarity with machine tools (mill, lathe, saw, etc.) preferred. Educational Requirements Bachelor of Science in Mechanical, Structural, Civil Industrial Engineering or similar required, Master of Science in Engineering preferred Physical Requirements/Working Conditions Office environment, manufacturing shop, test lab, and in-field environments Sitting, standing, and bending required (standing desks are provided so more or less standing can be accommodated within the office environment) Benefits Competitive Compensation Package Alternative work schedules Affordable Healthcare Benefits Package (Medical, Dental, Vision, Disability & Life/AD&D insurance, 401K) In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: Join the forefront of national security as a highly motivated and experienced R&D Mechanical Engineer with the Ballistic Missile and Air Delivered Tester Development teams. As the premier test equipment engineering capability for the Stockpile Surveillance Program, we play a critical role in ensuring the safety, security, and effectiveness of the U.S. nuclear weapon stockpile. This position offers a unique opportunity to learn about the U.S. Nuclear Security Enterprise, nuclear weapon design and function, and the role of Sandia National Laboratories in the nation s nuclear deterrence mission. On any given day, you may be called on to: + Collaborate with a multidisciplinary team to distill customer requirements into functional designs, ensuring that all aspects of the product realization process are addressed. + Design and implement test bed assemblies that will experience various mechanical environments, including centrifuge and shaker table test environments, as well as explosive containment assemblies (boom boxes). + Engage in solid modeling using Creo to create conceptual designs that meet rigorous testing standards, including vacuum testing and assessments under extreme thermal conditions. + Conduct first-cut analyses to evaluate material strength, derive explosive constituents into TNT equivalents, and assess expected blast pressures to ensure design viability. + Develop and implement innovative solutions to solve technically complex challenges, while partnering to clarify and refine system and subsystem-level requirements for testers. + Create detailed drawings and documentation, utilizing Geometric Dimensioning and Tolerancing (GD&T) and generating build-to-print design definition drawings to facilitate the manufacturing process. + Oversee the inspection and testing of hardware, ensuring that all documentation is accurate and complete prior to qualification, confirming that designs can perform their intended functions. + Troubleshoot test equipment that may be based on legacy or the latest pioneering technologies and participate in peer reviews of design efforts and concepts within the Labs. + Adapt to various projects at different stages of development to support the dynamic needs of the organization. Due to the nature of the work, the selected applicant will be required to work onsite in Albuquerque, NM. Some travel is required for this position. Salary Range: $117,500 - $235,700 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + A bachelor's degree in a relevant discipline and five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. + Ability to obtain and maintain a DOE Q clearance with the ability to obtain and maintain Sigma 15 access, which may require a polygraph Qualifications We Desire: The ideal R&D Mechanical Engineering candidate for Sandia National Laboratories will in addition possess the following: + Graduate degree in Mechanical Engineering or a related field. + Experience with mechanical engineering and product realization in the Nuclear Security Enterprise. + Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience: + Active DOE Q clearance + Formal education and/or experience in the design, development and qualification of mechanical systems and components. + Demonstrated experience in the design, development, and qualification of complex test beds. + Experience in requirements analysis, qualification plan development, and supporting large scale testing of complex systems. + Solid modeling experience, with a preference for experience using Creo. + Proficiency in Geometric Dimensioning and Tolerancing (GD&T). + Working knowledge of generating build to print design definition drawings. + Experience in conducting finite element analyses, including structural, thermal, and modal assessments. + Familiarity with component failure analysis techniques, such as FMEA and Fishbone diagrams. + Proven ability to maintain strong attention to detail and apply creative problem-solving skills while navigating the complexities of design and testing processes. + Proven experience in leading or contributing to high performance teams. About Our Team: The Integrated Stockpile Evaluation (ISE, Group 2250) mission is to provide trusted leadership for Sandia and NNSA in the planning, development, execution, analysis, and sustainment of the stockpile evaluation program.The Integrated Stockpile Evaluation (ISE, Group 2250) mission is to provide trusted leadership for Sandia and NNSA in the planning, development, execution, analysis, and sustainment of the stockpile evaluation program.The Integrated Stockpile Evaluation (ISE, Group 2250) mission is to provide trusted leadership for Sandia and NNSA in the planning, development, execution, analysis, and sustainment of the stockpile evaluation program. The Integrated Stockpile Evaluation (ISE, Group 2250) mission is to provide trusted leadership for Sandia and NNSA in the planning, development, execution, analysis, and sustainment of the stockpile evaluation program. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Position requires a Department of Energy (DOE) L security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE L-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 696826 Job Family: RD Regular/Temporary Position: R Full/Part-Time Status: F

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognition --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description A Fortune 100 aerospace giant hiring Manufacturing engineer responsible for supporting New Product Introduction (NPI) including planning and execution of new production line start up for avionics. The successful candidate would be coordinating with suppliers and engineering to analyze layout of equipment, workflow, assembly methods, and capacity. Position details: Client: Fortune 100 aerospace giant Job Title: Manufacturing engineer Location: Albuquerque, NM 87113 Job Summary: · Analyze BOM's and develops cost reduction strategies and initiatives with engineering early in the development cycle and oversees all aspects of execution. · Responsible for all aspects of manufacturability assessments by ensuring product complexity analysis is completed and design engineering has simplified: Bill of Materials, process, tooling, and assembly labor. · Position also is responsible to ensure obsolescence strategies have been developed prior to entry into production. · Role is heavily responsible for in depth cross organization coordination between all functional organizations. Role is expected to be able to develop in depth manufacturing plans. · Able to lead workshops in cost reduction, DFx, or DFm. Qualifications · Requires a bachelor's degree in engineering or equivalent industry experience and 2-4 years of experience in the field or in a related area. · Strong skills with excel, PowerPoint, Visio. · Lean Six Sigma or Black Belt skills. · Prior manufacturing experience planning new product introduction of circuit board assemblies or box build assemblies at a contract manufacturer. Additional Information If you want to know more and apply, please connect with: Niraj Singh **************************** ************ ************************************************

The CAD Engineer is responsible for creating, managing, and modifying complex CAD and drafting designs. Works closely with engineers and project managers to develop innovative and cost-effective designs that meet the needs of the factory. Primary Responsibilities * Create 2D lithography mask layouts in accordance with internal standards. * Create 3D models and associated drawings to support manufacturing, testing, and other engineering needs. * Support the creation of internal standards and tools for lithography mask layout and other CAD applications. * Partner with Project Field Application Engineers and Project Managers to aid design integration into the Fab. * Develop test structures and Design of Experiments to validate novel concepts and structures for risk mitigation. * Produce data reports that are concise and easy to understand. * Work directly and independently with customers to iterate on designs, refining them for successful fabrication. * Support pre-fabrication processes, including project onboarding & quoting. * Provide support for post-fabrication activities, including testing and assembly operations. * Coding and testing software. * Create plans and profile drawings. * Finding technical solutions to meet a client's goals. * Training and offering support and guidance to their team. * Additional functions and duties assigned as required. Requirements * Bachelor's Degree preferred. * 3+ years of experience in AutoCAD or other CAD packages. * This position will require lawful access to ITAR/EAR controlled information, and employees in these roles will need to meet those requirements. Requirements include US Citizenship due to government contracts. Knowledge, Skills, and Abilities * Familiarity with 2D CAD layout with complex Layer configurations (100+ Layers). * Ability to read and understand drawings and associated standards. * Ability to convert customer drawings into 2D CAD layouts following documented standards. * Ability to design 3D CAD models to support mechanical requirements provided by engineering staff. * Proficient with Microsoft Office products. * Ability to learn software programs such as Autodesk CAD platforms. * Excellent communication skills, detail-oriented with strong organizational skills. Physical/Working Requirements * Must be able to wear personal protective gear most of the day (where applicable) * Prolonged periods of sitting or standing Behavioral Traits * Strong verbal and written communication skills to convey quality standards, expectations, and feedback clearly to team members and stakeholders. * A willingness to adjust to changing circumstances, processes, or technologies for continuous improvement in dynamic environments. * The ability to work well with others, fostering a cooperative atmosphere, driving data management initiatives and engaging all levels of the organization.

Transportation Design Engineer (Entry to Mid-Level) About DJ&A DJ&A is a multidisciplinary consulting firm that delivers a wide variety of professional services to clients nationwide. Our specialties include: transportation design, survey & mapping, sustainability, site development and utilities, construction inspection/management, geospatial solutions, structural design, project management, community involvement, right of way services, and environmental compliance. DJ&A encourages innovation and an environment where every employee feels empowered to thrive. We design projects that serve our communities at every level, from local pedestrian and non-motorized improvements to Interstate freeways. Our work is often situated in the most scenic and inspiring locations -National Forests, Parks, Monuments, recreational facilities, and other public lands-offering unique and rewarding projects that foster career growth and a fulfilling employee experience. Working for DJ&A provides an opportunity to be the problem-solvers who have a positive impact on our communities through sustainable engineering solutions. Founded in 1973 by two former U.S. Forest Service employees who saw a need for a company that uniquely understood Forest Service projects, DJ&A has continued to grow and expand over the last 52 years by embracing the values of our founders. Today, we have a team of 180+ skilled professionals in offices in Missoula, MT (headquarters); Bozeman, MT; Vancouver, WA; Denver, CO; Sioux Falls, SD; Reno, NV; and Albuquerque, NM. Job Summary DJ&A seeks full-time Transportation Design Engineers with 1-10 years of relevant experience. Engineer In Training (EIT) Certificate preferred. Equivalent experience in transportation design may be considered in lieu of formal certification. The ideal candidate is an analytical, organized problem-solver with strong communication skills and a passion for civil engineering. Proven experience with road, highway, and trail design is desired. This is a great opportunity for a motivated, team-oriented professional who seeks to learn and grow in their field while working on a diverse range of infrastructure projects throughout the western U.S. Primary Duties and Responsibilities Support transportation engineering designs for Local, State, and Federal agencies. Provide support for construction administration (in-office and occasional on-site). Participate in the design and delivery of roadway infrastructure projects that vary in size and complexity. Work on multidisciplinary teams in both support and lead roles. Utilize design software, including AutoCAD, Civil 3D, or Bentley MicroStation ORD, to support project design tasks. Perform detailed CAD-based design, including roadway geometric design and corridor modeling. Prepare project deliverables, including quantity calculations, cost estimates, specifications, and construction schedules. Perform quality control checks, ensure code and design standard compliance, and follow QA/QC procedures. This position may require occasional travel, including overnight and weekend stays, primarily for construction inspection and site visits. While the primary role is office based, flexibility to support fieldwork is essential. Required Skills and Abilities: Proficiency in AutoCAD Civil 3D and/or MicroStation OpenRoads. Competency with Microsoft Office Suite software (Word, Excel, etc.). Strong written and verbal communication skills. Excellent planning, organizational, and problem-solving skills. Self-motivated, independent, and results-driven. Ability to meet tight deadlines and collaborate with geographically dispersed teams. Education and Experience: B.S. in Civil Engineering or related engineering field preferred. Relevant experience in transportation design may be considered in lieu of formal education. Familiarity with AASHTO, MUTCD, NACTO, and State DOT design manuals. Physical Requirements: Prolonged periods of sitting and computer use. Ability to lift up to 15 pounds occasionally. Ability to travel to remote project sites. Ability to access and navigate job sites and construction areas with noise, dust, and uneven ground. Willingness to work occasional nights or weekends as project schedules require. Wage and Benefits Salary commensurate with qualifications and experience. $31.50-$47.00/hour depending on experience. Non-exempt employees (prior to professional licensure): overtime paid at 1.5x hourly rate for hours worked over 40/week. Exempt employees (post-licensure): overtime paid as straight time. Medical, dental and vision benefits (monthly HDHP medical premiums fully paid for employee and dependents). Long-term disability and life insurance. Health Savings Account (HSA) or Flexible Spending Account (FSA) with annual company contribution. Roth and 401(k) retirement accounts. Profit sharing and bonus plan. 9/80 work schedule. Paid time off and holidays. Professional licensure reimbursement. Professional development training. Paid volunteer time and community involvement initiatives. Friendly, supportive, knowledgeable staff with a strong team culture! DJ&A is proud to be an Equal Employment Opportunity (EEO) employer. DJ&A is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at ******************.

Transportation Design Engineer (Entry to Mid-Level) DJ&A is a multidisciplinary consulting firm that delivers a wide variety of professional services to clients nationwide. Our specialties include: transportation design, survey & mapping, sustainability, site development and utilities, construction inspection/management, geospatial solutions, structural design, project management, community involvement, right of way services, and environmental compliance. DJ&A encourages innovation and an environment where every employee feels empowered to thrive. We design projects that serve our communities at every level, from local pedestrian and non-motorized improvements to Interstate freeways. Our work is often situated in the most scenic and inspiring locations -National Forests, Parks, Monuments, recreational facilities, and other public lands-offering unique and rewarding projects that foster career growth and a fulfilling employee experience. Working for DJ&A provides an opportunity to be the problem-solvers who have a positive impact on our communities through sustainable engineering solutions. Founded in 1973 by two former U.S. Forest Service employees who saw a need for a company that uniquely understood Forest Service projects, DJ&A has continued to grow and expand over the last 52 years by embracing the values of our founders. Today, we have a team of 180+ skilled professionals in offices in Missoula, MT (headquarters); Bozeman, MT; Vancouver, WA; Denver, CO; Sioux Falls, SD; Reno, NV; and Albuquerque, NM. Job Summary DJ&A seeks full-time Transportation Design Engineers with 1-10 years of relevant experience. Engineer In Training (EIT) Certificate preferred. Equivalent experience in transportation design may be considered in lieu of formal certification. The ideal candidate is an analytical, organized problem-solver with strong communication skills and a passion for civil engineering. Proven experience with road, highway, and trail design is desired. This is a great opportunity for a motivated, team-oriented professional who seeks to learn and grow in their field while working on a diverse range of infrastructure projects throughout the western U.S. Primary Duties and Responsibilities Support transportation engineering designs for Local, State, and Federal agencies. Provide support for construction administration (in-office and occasional on-site). Participate in the design and delivery of roadway infrastructure projects that vary in size and complexity. Work on multidisciplinary teams in both support and lead roles. Utilize design software, including AutoCAD, Civil 3D, or Bentley MicroStation ORD, to support project design tasks. Perform detailed CAD-based design, including roadway geometric design and corridor modeling. Prepare project deliverables, including quantity calculations, cost estimates, specifications, and construction schedules. Perform quality control checks, ensure code and design standard compliance, and follow QA/QC procedures. This position may require occasional travel, including overnight and weekend stays, primarily for construction inspection and site visits. While the primary role is office based, flexibility to support fieldwork is essential. Required Skills and Abilities: Proficiency in AutoCAD Civil 3D and/or MicroStation OpenRoads. Competency with Microsoft Office Suite software (Word, Excel, etc.). Strong written and verbal communication skills. Excellent planning, organizational, and problem-solving skills. Self-motivated, independent, and results-driven. Ability to meet tight deadlines and collaborate with geographically dispersed teams. Education and Experience: B.S. in Civil Engineering or related engineering field preferred. Relevant experience in transportation design may be considered in lieu of formal education. Familiarity with AASHTO, MUTCD, NACTO, and State DOT design manuals. Physical Requirements: Prolonged periods of sitting and computer use. Ability to lift up to 15 pounds occasionally. Ability to travel to remote project sites. Ability to access and navigate job sites and construction areas with noise, dust, and uneven ground. Willingness to work occasional nights or weekends as project schedules require. Wage and Benefits Salary commensurate with qualifications and experience. $31.50-$47.00/hour depending on experience. Non-exempt employees (prior to professional licensure): overtime paid at 1.5x hourly rate for hours worked over 40/week. Exempt employees (post-licensure): overtime paid as straight time. Medical, dental and vision benefits (monthly HDHP medical premiums fully paid for employee and dependents). Long-term disability and life insurance. Health Savings Account (HSA) or Flexible Spending Account (FSA) with annual company contribution. Roth and 401(k) retirement accounts. Profit sharing and bonus plan. 9/80 work schedule. Paid time off and holidays. Professional licensure reimbursement. Professional development training. Paid volunteer time and community involvement initiatives. Friendly, supportive, knowledgeable staff with a strong team culture! DJ&A is proud to be an Equal Employment Opportunity (EEO) employer. DJ&A is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at ******************.

**Posting Title:** Project Engineer - Data Center **Reports To:** Senior Project Manager **Salary Range:** $65,000 to $85,000 This position primarily involves working on-site at the project location or in office. Travel frequency and duration will vary depending on the role and project timeline. Final determination of a successful candidate's starting pay will vary based on a number of factors, including market location and may vary depending on job-related knowledge, skills, education and experience. The pay scale listed for this position is generally for candidates that meet the specified qualifications and requirements listed on this specific job description. We provide a competitive compensation package that recognizes your experience, credentials, and education alongside a robust benefits program to meet your needs. Our compensation reflects the cost of labor across several US geographic markets. **WHO WE ARE** For more than 70 years, Cupertino Electric, Inc. (CEI) has been powered by people who've built a reputation for delivering high-profile, complex projects. Real, tangible things that alter the landscape and improve lives. But even more than that, we've built a reputation for integrity. We're problem solvers and innovation seekers. We're team players and safety fanatics. And we always-always-do the right thing. Even when no one is looking. Because what we do here is important, but how we do it is everything. **THE DATA CENTER TEAM** We build mission-critical data centers throughout the U.S. to ensure crucial information accessed by millions of people is always available and secure. For decades, CEI is a leading provider of design, installation and commissioning of 20M+ square feet of data center space totaling over 4 GW of electrical systems-including infrastructure built to support AI-driven technologies. **ABOUT THE ROLE** We're seeking a Project Engineer ready to be on the front lines of a project--giving daily support to the field, project management, and customer teams. Our Project Engineers (PE) are vital in keeping our processes moving along and assists in the execution of project plans. This role will be responsible for specific activities such as coordinating material onsite delivery dates, maintaining RFI, submittals, and change order logs, and will serve as a key point of contact for internal customers. **_Knowledge:_** Learns to use professional concepts. Applies company policies and procedures to resolve routine issues. **_Job Complexity_** **:** Works on problems of limited scope. Follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained. Builds stable working relationships internally. **_Supervision:_** Normally receives detailed instructions on all work. **ABOUT YOU** You are willing and excited to learn-with a continuous focus on cultivating a growth mindset. You bring a wide range of skills from being organized to communicating through various channels and collaborating with your team members. You are comfortable taking initiative and ownership of your work. You are not afraid to throw on a pair of boots and your protective personal equipment (PPE)-safety first! **WHAT YOU WILL GAIN** At Cupertino Electric you'll be on a career development path to project management. You'll work directly for a project manager or project executive on a team that partners with field, engineering, and design teams. It's ok if you don't have a deep understanding of electrical construction, just be ready to learn and get fired up. You'll have the opportunity to soak up knowledge from everyone you work with - from the journeyman and general foreman to the project team assigning daily tasks. In addition to on-the-job experience and mentoring from your peers, you'll attend vendor off sites, training classes, and other learning opportunities. **MINIMUM QUALIFICATIONS** _Any combination of education and experience that, in the sole judgment and discretion of Company, would likely provide the required knowledge, skills and abilities as well as possession of any required licenses or certifications may qualify._ **Education:** High School Diploma or GED required. Bachelor's Degree in Construction Management, Business, Engineering, or similar preferred. **Licensure/Certifications:** None required. **Experience:** Zero (0) years of construction or related experience required. Two (2) years of construction or related experience preferred. **Driving Record:** Valid state-issued driver's license and satisfactory driving record. _*Applicants must be authorized to work in the United States. This position is not eligible for sponsorship._ \#LI-DM1 **PLEASE NOTE:** CEI will never ask for any money or financial information from applicants during the hiring process. To learn more about "job scams" how to avoid them, click here. (******************************************** CEI is a place where every single person can-and does-have an impact on the work we do and the communities we serve. Here, you can build your own story and grow to your full potential. You can collaborate and celebrate with amazing people. And you'll go home every day knowing you helped contribute to important work that shapes people's lives. Our commercial, data center and energy projects may be complex, but our approach is simple. We build great things and we do it with great people. The job duties listed are typical examples of work performed by positions in this job classification and are not designed to contain or be interpreted as a comprehensive inventory of all duties, tasks, and responsibilities. Specific duties and responsibilities may vary depending on department, program or project needs without changing the general nature and scope of the job or level of responsibility. Employees may also perform other duties as assigned. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Cupertino Electric Inc. aims to make cei.com accessible to any and all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact us at *************** or 1-(877)-747-4CEI. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. . Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. Key Duties and Responsibilities Estimating, project control, scheduling, quantity tracking. Support a team consisting of Project Manager, Project Engineers, Superintendents, and other staff. Build relationships and communicate with owners, design partners, subcontractors, & workforce. Review shop drawing, submittals and schedules, and process RFIs Monitoring the quality control, safety and environmental programs. Understand and assist with project layout. Identify critical work items, and procure long-lead items. Assist with monthly billings, cash flow projections, and process change orders. Manage document control including submittals schedules, contract documents, shop drawings, etc. Assist with delivery, inventory, and warehousing of materials and equipment. Resolve field problems and conflicts with subcontractors, suppliers, and workforce. Maintaining as-built drawings & manuals. Attend and/or lead meetings. Other duties as assigned Experience, Education & Skills 3 or more years of estimating or project management experience in the heavy industrial construction industry. Bachelor's Degree in Engineering, Construction Management or equivalent work experience. Be able to work in a team environment and be self-motivated. Must have a positive attitude and possess excellent motivations skills. Strong interpersonal skills to interface with owner representatives, engineering firms, subcontractors, other team members and senior management. Proficiency in use of computer software applications including, MS Office, HCSS or similar estimating programs, Agtek or similar earthwork programs, Bluebeam, Microsoft Word and Excel. Knowledgeable in Primavera. Strong communication skills both written and oral. Good attention to detail with the ability to recognize. Time Management, multitasking, and prioritization. Must have a valid Driver's License. Working Conditions Travel: This position is geographically located in Albuquerque, NM or surrounding states. Construction Site Environment: Physical ability to stand, walk, crawl, bend, reach and climb. Exposed to high noise levels. Office Environment: Extensive sitting at desk and computer; some standing, bending at the waist, stooping and reaching required; ability to lift 5-20 pounds occasionally. Expected salary range of $80,000-$120,000 Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. . Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at ***************** POSITION SCOPE The Project Engineer will be responsible for planning, developing, coordinating and managing onsite construction activities for heavy civil construction projects to ensure quality and cost. This position will be a travelling position where the qualified applicant will be required to integrate and travel with a project team or paving crew to assist with all the functions of the project. The individual must be able to multi-task and work in a fast-paced environment. Some night and weekend work will be required. Traveling is required for this position. $1,500 Sign-On Bonus! * Bonuses Payable following 90 days of employment PRIMARY DUTIES Manage job controls to ensure compliance with contract, budget, schedule, forecasting and job costing Supervise, direct, and assist project staff to ensure individual development and that project standards are met, and work is completed on time and under budget Develop and maintain project schedule and daily costs to ensure work is completed on time and under budget Provide technical support in construction planning, quality control, application of construction methods, resolution and documentation of design conflicts, and constructability reviews to ensure successful job completion Represent company during client and project management meetings to ensure effective communication Develop and maintain all material and submittal logs Review, analysis, management, and resolution of field coordination issues within project team Interpret project plans, specifications, and details for subcontractors and craft people Perform other duties as assigned REQUIREMENTS Bachelor's Degree in Civil Engineering, Construction Management or related field preferred, or equivalent combinations of technical training and related experience 7+ years of construction estimating support, engineering, field support, or similar experience Proficiency with Blue Beam and OST preferred but not required Proficiency with Heavy Job and HCSS preferred but not required Valid driver's license and acceptable MVR in accordance with Company Vehicle Program Ability to pass a pre-employment drug test Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, and rain MUST BE WILLING TO TRAVEL Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email ******************** or call the HR Department at ************** to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application.

At AV we provide a full suite of exquisite, space-qualified hardware trusted to fly in the most extreme environments space presents across GEO, MEO, LEO and Cislunar orbits. With hundreds of systems flying in space, our customers turn to AV when a mission can't fail. Our team is expanding to do the big things that have never been done before - the things the nation and the world are counting on us to deliver. Join the transformation and help us make this impact now. JOIN US FOR OUR INVITATION-ONLY HIRING EVENT ON FEBRUARY 24. APPLY TODAY TO BE CONSIDERED FOR THIS SPECTACULAR EVENT. We are seeking mechanical engineers to provide engineering design and analysis support to diverse R&D programs and small-volume production contracts. The selected candidates would be expected to lead the structural and thermal analysis of mechanical systems for space and airborne hardware, work within a multi-disciplined project team, be responsible for mechanical design and analysis activity, and support integration and formal acceptance-test activities. Projects vary from packaging high reliability electronics subsystems to opto-mechanical mechanism design such as gimbal and steering mirror systems. YOU'RE REQUIRED TO HAVE THIS Bachelor's degree in mechanical engineering, aerospace engineering, or relevant engineering degree and experience.. 2, or more, years mechanical engineering experience in one or more of the following areas: structural and thermal analysis including analytical calculations and FEA (stress analysis, modal analysis, thermal conduction analysis, bolt loads, etc.). design using CAD software, ideally experience with SolidWorks. tolerance analysis and GD&T practices. space hardware design, analysis, integration, and test. Strong technical writing skills applicable to engineering documentation (analysis reports, specifications, requirements documents, etc.). Ability to obtain and maintain a US DoD security clearance. DESIRED QUALIFICATIONS 5-8 years' experience in mechanical engineering of space systems. Strong verbal communication skills needed for customer interaction at design reviews, supplier interaction, etc. Ability to quickly adapt to various projects and types of work and to work several projects simultaneously while managing time and priorities. Ability to work independently or as part of a development team. Experience and willingness to be hands on during hardware assembly, integration, and test. Current US security clearance. Clearance Level No Clearance ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

Wilson & Company, Inc., Engineers & Architects is currently seeking a Mechanical Designer to support our team in Albuquerque, New Mexico. This position will produce 2D and 3D drawings/models using Revit and AutoCAD. Essential Job Functions: Provide preliminary design documents, such as conceptual designs, technical specifications and site plans for infrastructure and industrial projects. High degree of intrapersonal and communication skills is necessary. Proven teamwork and problem-solving skills. Excellent work ethic and a comprehensive understanding of engineering principles. Process piping design, equipment selection, material lists, contract documents, and drawing review for industrial projects. Modify 2D and 3D models and other drawings. Required Experience: 4 years or more of experience is preferred. Associate Degree in Mechanical Drafter/Design preferred. Good analytical and problem-solving skills. Able to work on multiple assignments at the same time. Experience with Revit, Microstation and AutoCAD highly preferred but not required. Please note that Wilson & Company is not currently sponsoring applicants for work visas. Annual Salary Range: $40,000 - $99,000+ (based on experience) Job Location: Albuquerque, New Mexico About Us: Wilson & Company has a rich history in planning and design, and the right candidate will become part of our bright future. We provide multidisciplinary engineering, architecture, surveying, mapping, environmental, and planning services, and employ staff throughout 16 offices in 9 states. The firm was founded in 1932 and provides services to a diverse client base including railroads; municipal, state, and federal agencies; energy, industrial, and commercial companies; and private developers. The cornerstone of our success is Higher Relationships, standards in Discipline, Intensity, Collaboration, Shared Ownership, and Solutions. Discipline is doing it right, with attention to details without exception. Intensity is doing what it takes to meet and exceed expectations. Collaboration is working together and bringing out the best in each other. Shared Ownership means we adopt the goals of others as our own. Finally, Solutions are achieved in a win-win environment. We value this commitment to Higher Relationships with our employees, clients, and the communities where we live and work. And for you, our culture intends to help you achieve personal and professional success. Come grow with us! Wilson & Company provides a comprehensive benefits package that encourages employee health and well-being. We have several options to choose from for health insurance, life insurance, disability insurance, paid time off, and retirement savings plan benefits. We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment background checks. Wilson & Company is a federal contractor and subject to various health and safety regulations enforced by federal, state, and local agencies, as well as health and safety requirements of our clients. Wilson & Company is committed to complying with all regulations and requirements, which could include, but are not limited to, vaccination requirements, testing requirements, masking requirements, and personal protective equipment requirements. All regulations and requirements are subject to change, which could impact Wilson & Company policy and requirements for employees.

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognition --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description A Fortune 100 aerospace giant hiring Manufacturing engineer responsible for supporting New Product Introduction (NPI) including planning and execution of new production line start up for avionics. The successful candidate would be coordinating with suppliers and engineering to analyze layout of equipment, workflow, assembly methods, and capacity. Position details: Client: Fortune 100 aerospace giant Job Title: Manufacturing engineer Location: Albuquerque, NM 87113 Job Summary: · Analyze BOM's and develops cost reduction strategies and initiatives with engineering early in the development cycle and oversees all aspects of execution. · Responsible for all aspects of manufacturability assessments by ensuring product complexity analysis is completed and design engineering has simplified: Bill of Materials, process, tooling, and assembly labor. · Position also is responsible to ensure obsolescence strategies have been developed prior to entry into production. · Role is heavily responsible for in depth cross organization coordination between all functional organizations. Role is expected to be able to develop in depth manufacturing plans. · Able to lead workshops in cost reduction, DFx, or DFm. Qualifications · Requires a bachelor's degree in engineering or equivalent industry experience and 2-4 years of experience in the field or in a related area. · Strong skills with excel, PowerPoint, Visio. · Lean Six Sigma or Black Belt skills. · Prior manufacturing experience planning new product introduction of circuit board assemblies or box build assemblies at a contract manufacturer. Additional Information If you want to know more and apply, please connect with: Niraj Singh **************************** ************ ************************************************

Job DescriptionSalary: The CAD Engineer is responsible for creating, managing, and modifying complex CAD and drafting designs. Works closely with engineers and project managers to develop innovative and cost-effective designs that meet the needs of the factory. Primary Responsibilities Create 2D lithography mask layouts in accordance with internal standards. Create 3D models and associated drawings to support manufacturing, testing, and other engineering needs. Support the creation of internal standards and tools for lithography mask layout and other CAD applications. Partner with Project Field Application Engineers and Project Managers to aid design integration into the Fab. Develop test structures and Design of Experiments to validate novel concepts and structures for risk mitigation. Produce data reports that are concise and easy to understand. Work directly and independently with customers to iterate on designs, refining them for successful fabrication. Support pre-fabrication processes, including project onboarding & quoting. Provide support for post-fabrication activities, including testing and assembly operations. Coding and testing software. Create plans and profile drawings. Finding technical solutions to meet a clients goals. Training and offering support and guidance to their team. Additional functions and duties assigned as required. Requirements Bachelors Degree preferred. 3+ years of experience in AutoCAD or other CAD packages. This position will require lawful access to ITAR/EAR controlled information, and employees in these roles will need to meet those requirements. Requirements include US Citizenship due to government contracts. Knowledge, Skills, and Abilities Familiarity with 2D CAD layout with complex Layer configurations (100+ Layers). Ability to read and understand drawings and associated standards. Ability to convert customer drawings into 2D CAD layouts following documented standards. Ability to design 3D CAD models to support mechanical requirements provided by engineering staff. Proficient with Microsoft Office products. Ability to learn software programs such as Autodesk CAD platforms. Excellent communication skills, detail-oriented with strong organizational skills. Physical/Working Requirements Must be able to wear personal protective gear most of the day (where applicable) Prolonged periods of sitting or standing Behavioral Traits Strong verbal and written communication skills to convey quality standards, expectations, and feedback clearly to team members and stakeholders. A willingness to adjust to changing circumstances, processes, or technologies for continuous improvement in dynamic environments. The ability to work well with others, fostering a cooperative atmosphere, driving data management initiatives and engaging all levels of the organization.

Job Description Senior Civil Transportation Engineer Founded in 1973, DJ&A is a multidisciplinary professional services consulting firm with office locations in Montana, Colorado, Washington, South Dakota, New Mexico, and Nevada. Our team of more than 180 professionals works across the country to deliver a diverse range of engineering, environmental survey, mapping, landscape architecture, and planning projects for federal, state, local, tribal, and private clientele. DJ&A is seeking a full-time Senior Transportation Engineer with 10 to 20 years of relevant experience, Preferred project experience with: Preparation of roadway construction documents for all types of roadway projects, including arterial, rural, interstate, and other. Project Management and Design Experience on New Mexico Department of Transportation Projects is desired. Project Management and Design Experience on County and City Transportation projects within New Mexico is desired. Experience in marketing of roadway projects in New Mexico is desired. Primary Duties and Responsibilities: Project management for the preparation of construction documents for transportation projects. Team lead for marketing of transportation projects for the NMDOT, New Mexico Department of Transportation, and local county and city agencies. Will be working with design engineers to develop the required construction documents. Effective communication skills are essential as you will be coordinating efforts between agencies, our local team, and others within the company via online communication. Education and Experience: Bachelor's degree in Civil Engineering. Professional Engineers License in Civil Engineering. Physical Requirements: Prolonged periods sitting at a desk and working on a computer. Must be able to travel to various project sites. Must be able to access and navigate job sites and construction areas. Salary and Benefits Wage: $40-$55 per hour, depending on experience. Excellent benefits including medical, dental, vision, 401(k) and profit sharing, long-term disability, performance bonuses, paid time off, and eleven paid holidays. Office Location Albuquerque, NM Reno, NV DJ&A is proud to be an Equal Employment Opportunity (EEO) employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, reproductive health decisions, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, genetic information, political views or activity, or other applicable legally protected characteristics. DJ&A is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at ****************** .

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a highly skilled and motivated engineer with a strong background in navigation analysis and sensor fusion. The ideal candidate will possess extensive experience in applying advanced techniques in covariance analysis and Monte Carlo methods to develop, evaluate and enhance real-time navigation systems. They will have a deep understanding of Kalman Filter design and implementation, along with a proven ability to derive and develop algorithms that solve complex engineering challenges of national security significance. On any given day, you may be called on to: * Develop innovative Navigation and Estimation algorithms from first principles to improve modeling and simulation analysis tools and real-time embedded flight software * Integrate new sensors models, interfaces and other capability upgrades for flight software and analysis tools using modern testing and configuration management procedures * Perform navigation and estimation analysis on simulated and/or flight collected data * Document algorithm, software, and analysis results in white papers, presentations, and other data products * Collaborate and coordinate with internal and external organizations and team members to execute project tasks and milestones Salary Range $102,400 - $199,700 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A bachelor's degree in a relevant discipline or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * Ability to be granted a DOE Q clearance Qualifications We Desire The ideal Electrical Engineering candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Ability to work independently and collaborate well in a multidisciplinary team of designers and test engineers. * Outstanding verbal and written skills, including the ability to develop and present briefings that are clear and compelling. Also, for this posting we are seeking individuals with the following experience: * Demonstrated knowledge of sensor fusion techniques, particularly Kalman Filters and multivariable multiplicative state estimation. * Working knowledge of six degrees of freedom dynamic modeling and analysis, including both translational and rotational motion, with the ability to derive dynamic equations of motion from first principles. * Understanding of inertial navigation techniques and Inertial Measurement Unit (IMU) sensor technology. * Experience with vehicle trajectory and navigation analysis techniques, such as covariance and Monte Carlo analysis. * Experience modeling and simulating aerospace and dynamic systems in MATLAB and C/C++. * Demonstrated knowledge of object-oriented programming methods and practices, software development processes, unit testing, and requirements verification. * Knowledge of Global Positioning System (GPS) and other Global Navigation Satellite Systems (GNSS) technologies, principles, and signal processing techniques. * Experience with navigation sensor hardware interfaces, data acquisition, and analysis; examples include GPS/GNSS, odometers, altimeters, IMUs, cameras, LIDAR, radio frequency beacons, etc. * Experience with developing, implementing, and testing control algorithms on electromechanical systems. * Demonstrated experience in deriving and implementing numerical algorithms and performing quantitative engineering analysis About Our Team The 5324 Navigation, Pointing, and Control (NPC) Motion Systems Department develops advanced real-time NPC solutions and performs navigation system and thermal, vibration, and shock analysis for projects critical to national security. We collaborate across Sandia National Labs, supporting efforts in modeling and simulation, sensor characterization, trajectory reconstruction, and avionics and electro-mechanical design, testing, and integration. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

At AV we provide a full suite of exquisite, space-qualified hardware trusted to fly in the most extreme environments space presents across GEO, MEO, LEO and Cislunar orbits. With hundreds of systems flying in space, our customers turn to AV when a mission can't fail. Our team is expanding to do the big things that have never been done before - the things the nation and the world are counting on us to deliver. Join the transformation and help us make this impact now. JOIN US FOR OUR INVITATION-ONLY HIRING EVENT ON FEBRUARY 24. APPLY TODAY TO BE CONSIDERED FOR THIS SPECTACULAR EVENT. We are seeking mechanical engineers to provide engineering design and analysis support to diverse R&D programs and small-volume production contracts. The selected candidates would be expected to lead the structural and thermal analysis of mechanical systems for space and airborne hardware, work within a multi-disciplined project team, be responsible for mechanical design and analysis activity, and support integration and formal acceptance-test activities. Projects vary from packaging high reliability electronics subsystems to opto-mechanical mechanism design such as gimbal and steering mirror systems. YOU'RE REQUIRED TO HAVE THIS Bachelor's degree in mechanical engineering, aerospace engineering, or relevant engineering degree and experience.. 2, or more, years mechanical engineering experience in one or more of the following areas: structural and thermal analysis including analytical calculations and FEA (stress analysis, modal analysis, thermal conduction analysis, bolt loads, etc.). design using CAD software, ideally experience with SolidWorks. tolerance analysis and GD&T practices. space hardware design, analysis, integration, and test. Strong technical writing skills applicable to engineering documentation (analysis reports, specifications, requirements documents, etc.). Ability to obtain and maintain a US DoD security clearance. DESIRED QUALIFICATIONS 5-8 years' experience in mechanical engineering of space systems. Strong verbal communication skills needed for customer interaction at design reviews, supplier interaction, etc. Ability to quickly adapt to various projects and types of work and to work several projects simultaneously while managing time and priorities. Ability to work independently or as part of a development team. Experience and willingness to be hands on during hardware assembly, integration, and test. Current US security clearance. Clearance Level No Clearance ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR