Mechanical design engineer jobs in Brookhaven, NY - 202 jobs

The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Supervisory Responsibilities: None Duties and Responsibilities: Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods. Design, install, and troubleshoot manufacturing equipment. Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts. Design testing methods and test finished products or process capabilities to establish standards or validate process requirements. Design layout of equipment or workspaces to achieve maximum efficiency. Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures. Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing Provide technical expertise or support related to manufacturing. Develop, document and implement standard work instructions for critical manufacturing operations. Required Skills and Abilities: Excellent people and communication skills are required (both oral and written). Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation Computer literacy in a MRP system (Oracle a plus), Microsoft Office. Able to work under pressure Highly technical and analytical skills such (drawings, schematics, layout) Able to think out of box. Project management skills Highly organized and efficient Possess leadership and interpersonal skills Strong problem-solving skills Education and Experience: Bachelor's degree in Industrial Engineering 3-5 years of progressive experience in manufacturing engineering. Experience in metal fabrication, welding and/or brazing of pressure containing products. Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar. Due to ITAR Restrictions, an export license may be required. Other Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Compensation Employee Type: Salaried Salary Minimum: $85,000 Salary Maximum: $105,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) ###-####. Nearest Major Market: Long Island Nearest Secondary Market: New York City

As a Senior Fab Shop Manufacturing Engineer at BAE Systems, you will use yours skills to develop and improve manufacturing/machining processes by studying product and manufacturing methods. You will create and modify CNC programs, as well as design fixtures and tooling for operations, manufacturing processes and material handling. You will complete calculations and design for new equipment and process improvement, as well as create and maintain technical drawings for processes, tooling, and fixtures to support manufacturing operations. This is a first shift position on a 9/80 work schedule with every other Friday off! Maintains communication with Shop Value Stream Leader (VSL) and Shop Lead to ensure efficiency of all fabrication processes and resolve all issues pertaining to them. Coordinate with VSL or Lead, provide support to all teams, and maintain quality of all work processes in systems. Provide day-to-day technical support to fab shop personnel. When needed, supports the shop floor personnel to set up and operate a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions. Analyze current shop practices and recommend improvements. Troubleshoots and analyzes problems with production and assembly. Analyzes root causes for all fabrication issues. Interprets blueprints, sketches, and engineering specifications: determines sequence of operations, number of cuts required, and method of setup: uses a variety of machinist's hand tools and precision measuring instruments: makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds: measures, marks, and scribes dimensions and reference points to lay out stock for machining: fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. Review of Engineering design drawings for manufacturability and development of alternative approaches to ease the manufacturing process and reduce cost. Support Engineering design and prototyping efforts, prepare detail tooling drawings using Cad software and develop work plan instructions for all fabrication processes. Design jigs and fixtures as required. Support the development of estimates for fab shop efforts. Participate in Basis of Estimate (BOE) creation. ESSENTIAL FUNCTIONS: Support various aspects of tooling development, including but not limited to; design reviews, support of fabrication and qualification related to prototype, pilot and production. Support the design, review and implementation of new products, tooling and fixtures. Provide fab shop cost estimates in support of engineering and production needs. Create BOEs. Development of process and maintenance requirements of new machines on the floor. Establish documentation outlining procedures and maintenance schedules. Design and/or Manage tooling designs. Creation of CNC programs and shop work plans. Research and qualify potential new equipment purchases. Establish and maintain manufacturing work plans Analyze and establish production standard times Optimize, establish, and organize work areas considering ergonomics and material flow Review and approve engineering changes with minimal impact/risk to production Responsible for determining the material and method of how parts are fabricated (raw stock, forgings, castings, etc.) CNC machine programming experience Proficiency in tooling design to include fixturing/tooling, go/no-go gauges, and poke-yoke devices to improve productivity, safety and quality Identify and participate in Continuous Improvement events Assist in developing PFMEAs Machining and Fabrication experience and equipment capability knowledge Basic Materials (Metallurgical) knowledge Welding process knowledge preferred Experience with Jigs and Fixtures. Other duties as assigned. Required Education, Experience, & Skills Bachelor of Science Degree in Mechanical Engineering or equivalent Minimum of 2 years of experience working in a Manufacturing Fab Shop environment. Excellent interpersonal and communication skills to interact with co-workers. Hands-on floor support experience and working with shop employees. Strong problem solving skills. Using a combination of solid engineering principles and common knowledge. Geometric dimension & tolerance (GD&T) experience Ability to multi-task and adjust priorities using strong organizational and time management skills to meet time sensitive deadlines. Accuracy and attention to detail. Advanced computer skills. Experience working with 3D software and CAD models. Preferred Education, Experience, & Skills Green Belt / Black Belt Lean 6 Sigma training Lean manufacturing training/experience Strong understanding of numerical control (NC) programming Experience with Value Stream Mapping (VSM) Experience with AS9145 Experience with CREO software Pay Information Full-Time Salary Range: $84882 - $144300 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Did you love building as a kid? Do you enjoy taking something apart, just to figure out how to put it back together? Do you geek out on robots? Our engineers drive packaging innovation, creating new ways to improve - and increase - performance. We're passionate about designing custom equipment that exceeds our customers' expectations. Our engineers partner closely not only with our customers, but also with peers across sales, manufacturing, and assembly. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you're excited by how machines work and want to make them better, we want to talk to you. Do we have your attention? Keep reading. Modern Packaging is seeking a talented Mechanical Design Engineer to develop, design, and implement new product designs of automated machinery. Candidate shall have the ability to create new designs, modify existing designs, and provide technical support to customers. The position is located at our Deer Park, NY location and will report to the Director of Engineering. Are you excited about this work? Engineering, design, and fabrication of automated machinery Develop machine drawings, 3D modeling, assembly and detail drawings. Manage projects from quote to FAT (Factory Acceptance Test). Interface with manufacturing to ensure parts are properly fabricated, machined, and assembled. This will include updating revisions to mechanical design specifications/drawings. Interface with assembly department to conduct machine testing and proper operation. Interface with other departments e.g., controls, parts, purchasing, etc., to coordinate work/projects and ensure customer on-time delivery. Create and maintain Bill of Materials. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matter. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay, potential short-term incentive opportunities, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Base Salary Range: $95,000 - $115,000 If this sounds like you, we want to connect! Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology (BSME or BSMET), or similar engineering or technical degree from an accredited four-year college or university or equivalent industry experience in mechanical design required. At least 3 years' experience in design of automated industrial machinery. Experience using AutoCAD and Autodesk Inventor and/or SolidWorks. General knowledge of manufacturing processes, techniques, and practices. Strong analytical skills, ability to utilize knowledge to provide creative design ideas. Excellent verbal and written communication skills. Desire to be hands-on with equipment building & design, ability to work both independently and in a team environment. Pro Mach, Inc. We have been named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strengths of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! More career opportunities to consider! Pro Mach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #MODER

Freeport, Texas The world needs solutions, and we need you! At BASF, we create chemistry through the power of connected minds. By balancing economic success with environmental protection and social responsibility, we are building a more sustainable future through chemistry. As the world's leading chemical company, we help our customers in nearly every industry meet the current and future needs of society through science and innovation. We provide a challenging and rewarding work environment with a strong emphasis on process safety and the safety of our employees and the communities in which we operate. We are always working to form the best team-especially from within, through an emphasis on lifelong learning and career development. At BASF, we are committed to creating an exceptional workplace that values diversity and prioritizes our employees' well-being and development. Our dedication has been recognized through various awards and accolades. In 2024, BASF received Business Group on Health's Best Employers: Excellence in Health & Well-being award and ranked on the Top 50 Employers list by the readers of Minority Engineer Magazine. Fair360 (formerly Diversity Inc) also ranked us 22 on their Top 50 Companies List, and we were named one of America's Best Large Employers by Forbes and Statista. For the 10th consecutive year, we are proud to have achieved a top score in the Human Rights Campaign Foundation's Corporate Equality Index, earning the 2023-2024 "Equality 100 Award" as a Leader in LGBTQ+ Workplace Inclusion. Come join us on our journey to create innovative solutions for a sustainable future! Where the Chemistry Happens.. BASF's Technical Development Programs (TDPs) were created to meet the needs of the business within the Gulf Coast by providing highly motivated, local university students that are graduating in engineering an opportunity to enhance their technical and manufacturing engineering skills through a variety of diverse learning experiences. Participants will contribute to rotational assignments within Freeport, Texas. They will develop technical skills and a deeper understanding for manufacturing, while fulfilling specific business needs. Participants also have the opportunity to assess their capabilities, skills, and interests and gain valuable exposure to BASF's culture, values, and decision-makers. Belong to Something Bigger. #belongat BASF Apply for the BASF Mechanical Engineering TDP Program! Program Summary: APPLICATIONS ARE AVAILABLE TO STUDENTS RECEIVING A BACHELOR'S DEGREE IN MECHANICAL ENGINEERING BETWEEN DECEMBER 2025 - MAY 2026. * As a highly motivated rising graduate, you will participate in a 24-month engineering rotational program with two, one-year rotations in various technical areas, including: Manufacturing/Operations and Maintenance * Successfully engaging across the business, you will be exposed to the technical and scientific aspects of plant engineering, while also working in areas of safety and environment to uphold our high standards * Upon your completion of the program, you may be offered direct placement within the organization in a variety of disciplines in engineering and production * Potential start dates are Spring/Summer 2026 Create your own chemistry: What We Offer You... Adding value to our customers begins with adding value to you. You@BASF is the suite of benefits, perks, programs and unique opportunities we offer to support you-the whole you-in all stages of your life and career. With you@BASF, you create your own chemistry. The total rewards that you receive as a BASF employee go way beyond a paycheck. From competitive health and insurance plans, to robust retirement benefits that include company-matching contributions, to making sure you never stop learning, we believe investing in you is investing in our success. Working for a large, global organization, you'll have a chance to grow professionally and personally, expand your network and build a rewarding and dynamic career. * Enhanced career and technical development, and value delivery to BASF through planned assignments * Development of your technical expertise and the ability to network with upper level management throughout BASF * A comprehensive program of employee benefits and a competitive retirement savings plan To learn more about our programs, visit: ******************************* Formula for Success... * Graduates receiving a Bachelor's degree in Mechanical Engineering between December 2025 - May 2026 * Demonstrated academic achievement (minimum GPA 3.0) * Authorization to work in the U.S. now and in the future without restrictions or future sponsorship * Active participation in extra-curricular activities and on-campus organizations * Excellent written and oral communication skills * Previous internship/co-op experience is a plus Privacy statement BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ************* to report fraud. Equal employment opportunities We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

IntroductionASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, and more energy-efficient microchips. We design, develop, integrate, market, and service these advanced machines, enabling our customers-the world's leading chipmakers-to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics.We are currently recruiting for an internship located at our office in Wilton, CT.Your AssignmentThis position is for a Production Engineering First Line Support (FLS) Intern with an innovative attitude. The intern will provide support to the mechanical/mechatronics production engineering team, including: Data analysis, procedure writing, factory floor troubleshooting, and continuous improvement projects. Spending time in the cleanroom providing direct support to production processes and conducting time studies when needed. Working in an office environment on continuous improvement and process development for production. Projects are tailored to candidate skills and can include: Automation enhancements and programming Tooling and design improvements Cycle time reduction initiatives Supporting troubleshooting and improvement of mechanical assembly and alignment issues, module testing, final quality concerns, and manufacturing tooling challenges. Performing analysis on mechanical performance data and deriving actionable conclusions. Evaluating and dispositioning failed parts with proposed solutions. Assisting in the development of manufacturing procedures and technical work instructions, as well as participating in design and document reviews. Your Profile Pursuing a Bachelor's or Master's degree in Mechanical Engineering, Mechatronics Engineering, or a related field. (minimum of 3 years completed) SkillsWorking at the cutting edge of technology means new challenges and problems to solve every day-and collaboration is key. You'll be part of a creative, dynamic work environment where you'll work with supportive colleagues and have the flexibility to choose how best to tackle tasks.To thrive in this role, you'll need: Ability to read and interpret mechanical drawings and technical documentation. Familiarity with CAD tools (e.g., SolidWorks, NX) and mechanical design principles. Knowledge of mechatronic systems, actuators, sensors, and precision motion control is a plus. Experience with data analysis tools such as MATLAB, LabVIEW, or Python is beneficial. Understanding of manufacturing processes, tolerances, and assembly techniques. Ability to learn and apply new information quickly. Strong attention to detail and accuracy. Ability to work on multiple projects and communicate solutions effectively. Other InformationThis position is located on-site in Wilton, CT. It requires in-person presence for work-related events, training courses, and meetings to ensure teamwork, collaboration, and innovation.Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

Quanex is looking for a Design Engineer to join our team located in New Haven, CT. Come join the Quanex Access Solutions Team (Bilco) where you can be a part of a growing team! The Bilco Brand manufactures a complete line of products that provide access for commercial building applications. Products are available in a number of standard sizes and are custom engineered to meet unique access requirements. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Design Engineer? * Responsibility for product development within a Lean environment, engineering documentation for all product lines, and product review and testing. * Work in collaborative environment. * Be a part of a growth oriented business. What Success Looks Like: * Initiating product design and innovation. * Ensure that products comply with all applicable codes and regulations. * Determining feasibility of manufacture and modifications necessary to alter construction of a specific product to accommodate customer requirements. * Supporting engineering staff in testing of new product prototypes, or new design applications to customer specifications. * Interacting with customers and meeting their needs. What You Bring: * Bachelor of Science degree in Mechanical Engineering or Industrial Engineering * 5+ years of product development experience * Excellent verbal and written communication skills * The ability to work closely with other engineers and others, including external customers, in a team environment. * Experience with root cause problem solving and driving improvements to designs and processes. * Experience with Solidworks and AutoCAD. The targeted salary range for this position is $78,000-$90,000 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #LI-LG1

Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package Medical, Dental, Vision PTO Program and Paid Holidays 401K EAP ESOP (Employee Stock Ownership Plan) Design Engineer Essential Responsibilities Review engineered contract drawings and specifications for the design of electrical control panels. Design and layout of electrical panels using AutoCAD. Ensure that all panels are being designed and constructed to UL Standards. Creating Bill of Materials for the sales engineer team. Create testing procedures for specific projects to be used by shop personnel. Determine parameters to program variable frequency drives and soft starters. Provide technical support on the products we manufacture. Design Engineer Necessary Qualifications 3 years+ experience in the design of electrical system preferred Ability to use AutoCAD for electrical design work. Hold a degree in the engineering field. Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

FLSA Status: Salary/Exempt Reports To: General Manager Direct Reports: None Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Responsibilities • Assist with research and development, new product introduction, and production deployment. • Create CAD models, drawings, specification sheets, and prototypes for new and existing products. • Modify existing products to improve efficiency and performance. • Design for manufacturability. • Research materials and production costs to determine manufacturing requirements. • Ensure product designs conform to customer and government specifications. • Test designs to ensure they meet safety, usability, and environmental impact standards. • Analyze data from tests and identify opportunities for improvement. • Collaborate with engineering, sales, procurement, and production teams. • Present designs and prototypes to customers and colleagues. • Create BOMs and routings for new products, legacy products, and engineering changes as necessary. • Develop and manage costing analysis as necessary during product development and deployment. • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system. • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc. • Manage projects, including budgets, schedules, and costs when applicable. • Perform DFMEAs, PFMEAs, and Risk Assessments. • Ensure that the company's designs and designing processes comply with all government laws and regulations. • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision-making. • Collaborate with quality team to assure products are being produced to applicable specifications. • Evaluate quality control processes and make recommendations for improvements in quality control. • Devise procedures to inspect and report quality issues. • Assure the reliability and consistency of product manufacturing by checking processes and final output. • Facilitate proactive solutions by collecting and analyzing manufacturing data. • Document and optimize design procedures to ensure replicability and compliance with internal and external standards. • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis. • Assist in the preparation for quality audits. • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Minimum Qualifications Education and Experience • Bachelor of Science in engineering or related field • 3-10 years of design engineering or relevant experience • 2-5 years of electrical connector design experience Knowledge • Ability to create 3D Computer-aided design (CAD) models and drawings • Ability to read drawings, specifications, test procedures, etc. • Fundamental mathematical and physical principles • Proficient in MS Office • Geometric Dimensioning and Tolerancing (GD&T) Skills • Good oral and written communication and presentation skills • Great interpersonal skills • Excellent organizational skills • Results-oriented with strong analytical skills • Ability to work well independently and part of a team • Ability to motivate team members in a creative and effective manner • Ability to work effectively under stressful and dynamic environments Other responsibilities, initiatives and ad-hoc projects as required. Compensation range: $90,000 - $125,000

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Job Description Supports the manufacture of products to ensure Operations core metrics are successfully achieved. Provides technical leadership and support of manufacturing improvements and floor support for assigned product lines. Principal Accountability: Provides engineering support for troubleshooting efforts for any process issues in designated area. Summarize and draw conclusions from test results leading to effective technical resolution of process problems. Develops and maintains the documentation necessary to ensure the consistent manufacture of MITG products (processes, drawings, and shop floor paperwork). Works with Process Development engineers to ensure design for manufacturing elements are incorporated into PDP activities. Identifies, justifies, and implements significant data driven projects to reduce manufacturing costs, improve processes, increase product reliability, and enhance process capability. Designs and evaluates new and existing fixtures and equipment, test methods, specifications, layouts, and standards supporting a Lean manufacturing environment. Identify and recommend manufacturing technologies to strategically develop business objectives and potential opportunities. May have supervisory responsibility for technician staff. Comply with applicable FDA and international regulatory laws/standards and the MITG Code of Conduct. Other duties as assigned or required Additional Information Please contact: Sagar Rathore ************ ******************************

The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions Works on multiple highly complex major projects requiring innovative, original solutions May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget. Subject Matter Expert in at least one area or system. Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material. Exercises considerable latitude and technical judgment in deciding work methods. Can lead a group of engineers and technicians, responsible for budget and manpower estimates. Develops innovative solutions to unique problems. Works mostly independently with minimal supervision. Exercises substantial initiative/ judgment in work methods and in interpreting goals. Able to give effective presentations to critical/high level customers. Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time. Responsible for large and fairly complex projects. Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner. Proven leadership skills. Identifies problems and actively devises appropriate solutions. Ability to continuously improve through additional training or research Qualifications/Minimum requirements U.S. Citizenship Required. BSME or equivalent educational degree required. Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred. Strong knowledge of AS9100 and ISO requirements. Ability to read, write, and speak in English proficiently. Strong work ethic; can work independently or in a group. Highly professional with excellent telephone etiquette. Must be detail oriented, self-motivated and the ability to multi-task in a fast-paced environment. Salary Range: $90k to $100k annually. This estimated range represents a good faith projection of what we believe is a competitive compensation range for this position. Please understand that the offered salary will be determined based on factors such as the applicant's credentials, experiences, and the specific requirements of the role, as well as potential internal equity and external market considerations. We do not customarily hire at the top end of the range. East/West adheres to pay transparency and equity principles and strives to remain competitive within the market. The full compensation package will be shared and discussed during the hiring process. In addition to the base salary, East/West is committed to supporting our team's well-being and professional growth through a comprehensive benefits package. This generous benefits package, includes but is not limited to: Medical Dental, Vision, Life Insurance, Long-Term Disability Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD) PTO (3 weeks accrued first year!) 10 Paid Holidays Flexible Spending Accounts 401(k) with matching Pet Insurance 9/80 work week (Every other Friday off) Job Title: Design Engineer 3 Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC . is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft.

Job DescriptionSalary: Department: Mechanical Engineering Reports To: Head of Mechanical Engineering We are seeking a highly capable and creative Design Engineer who will work primarily in SolidWorks to transform conceptual sketches into detailed, production-ready 3D models. This role demands exceptional 3D modelling skills, with a strong emphasis on both solid and surface modelling. The ideal candidate will also bring practical knowledge of prototyping and manufacturing processes, including 3D printing, injection moulding, ISBM, EBM, and thermoforming. The ability to work efficiently and effectively in a fast-paced, deadline-driven environment is essential. This role operates within the Consumer-Packaged Goods (CPG) space, requiring an understanding of design considerations specific to this industry. Applicants selected for an interview will be asked to complete a brief CAD skills exercise as part of the interview process. Successful completion of the test will be part of the screening process. Key Responsibilities Use SolidWorks as the primary tool to develop detailed 3D CAD models from concept sketches. Apply advanced solid and surface modelling techniques to create complex, manufacturable geometries. Translate design intent into feasible models suitable for prototyping and production. Collaborate with cross-functional teams to ensure design feasibility and alignment with project goals. Integrate 3D printing into the prototyping workflow, selecting appropriate technologies and materials. Optimize designs for injection moulding, ISBM (Injection Stretch Blow Moulding), EBM (Extrusion Blow Moulding), and thermoforming. Work efficiently under tight timelines and adapt quickly to changing project requirements. Participate in design reviews and contribute to continuous improvement initiatives. Required Skills and Experience Two or more years of professional experience Expert-level proficiency in SolidWorks, with a strong focus on both solid and surface modeling. Demonstrated ability to convert conceptual ideas into functional 3D models. Strong understanding of 3D geometry and spatial reasoning. Experience with 3D printing technologies and materials. Familiarity with manufacturing processes including injection moulding, ISBM, EBM, and thermoforming. Ability to work effectively in a fast-paced environment with multiple concurrent projects. Passionate about branding & packaging. Strong communication and collaboration abilities. Proficiency in Microsoft Office tools including Word, PowerPoint, and Excel. Preferred Qualifications Bachelor's degree in engineering discipline, Industrial Design, or related field. Expert in 3d CAD-Surface modeling and Solid modeling SolidWorks Preferred Experience with Adobe Creative Suite, KeyShot, or similar tools a plus. Experience with prototyping and product development cycles. Understanding material behavior in both additive and moulding processes.

We are seeking a skilled Electromechanical Engineer to design, develop, and maintain electromechanical systems and products. The ideal candidate will have a strong background in both electrical and mechanical engineering principles and will collaborate with cross-functional teams to deliver innovative solutions. Key Responsibilities: Design & Development: Create detailed designs for electromechanical systems, including circuit designs and mechanical layouts. Prototyping: Develop and test prototypes, utilizing hands-on techniques to validate design concepts. Collaboration: Work closely with electrical and mechanical engineers to ensure seamless integration of systems. Testing & Validation: Conduct performance testing and troubleshooting to ensure product reliability and compliance with industry standards. Documentation: Prepare and maintain technical documentation, including design specifications, test reports, and user manuals. Project Management: Assist in project planning and management, including timelines, budgets, and resource allocation. Continuous Improvement: Identify opportunities for product and process improvements and implement solutions to enhance efficiency and performance. Compliance: Ensure all designs and processes adhere to relevant safety and regulatory standards. Qualifications: Education: Bachelors degree in Electromechanical Engineering, Mechanical Engineering, Electrical Engineering, or a related field. A Masters degree is a plus. Experience: 5 years of experience in electromechanical design and engineering. Skills: Proficient in CAD software (e.g., SolidWorks, AutoCAD). Strong knowledge of electrical circuits and mechanical design principles. Excellent problem-solving and analytical skills. Strong communication and teamwork abilities.

Summary:This position is responsible for the design and development of beauty display components, including vacuum trays, injection trays, fabricates, corrugated structures, and end caps. The role involves 3D modeling, high-quality rendering, and the preparation of detailed 2D engineering drawings. In addition, the designer will produce high-precision prototype samples using laser cutting machines and 3D printers. Success in this role requires a balanced understanding of aesthetic design principles and practical engineering applications.Job Description: • Create 3D design models for beauty display products, including vacuum trays, injection trays, and corrugated/fabricated parts • Produce high-quality rendered visuals for client presentations and internal reviews • Generate accurate 2D engineering drawings to support manufacturing and prototyping • Operate laser cutting machines and 3D printers to fabricate prototype samples • Collaborate closely with cross-functional teams, including engineering, product development, and marketing • Ensure that all designs are optimized for cost-effective manufacturing and material use • Continuously improve processes and stay updated with the latest design and prototyping technologies Benefits Premium Medical Insurance Coverage 401(k) Savings Plan Paid Time Off (PTO) based on seniority Paid Holidays Additional Workplace Offerings (subject to change or eligibility.) Annual Bonus Plan Onsite Employee Fitness Center with Indoor Racquetball Court and Yoga Room Summer Fridays Complimentary Gourmet Breakfast, Lunch, and Dinner Relocation Support for New Hires Work Anniversary Recognitions Congratulatory & Condolence Gifts Employee Referral Bonus Program License/Certification Reimbursements Corporate Employee Discounts Visa Sponsorships (100% paid by the company) i.e., New H-1B, H-1B Transfer, O-1, and Green Card Commuter Support (Shuttle Bus Program and EZPass Support) Vehicle Perks Qualification(s):Education(s):Bachelor of Science (B.S): Industrial Design (Required), Bachelor of Science (B.S): Mechanical Engineering (Required) Work Experience:Experience Range I: 0 - 2 years of relevant experience or industry exposure in a related field Skill(s):3D Designing, Adobe Photoshop, Luxion KeyShot, Product Engineering, Siemens NX, SolidWorksLanguage(s):EnglishCertification(s):Not Applicable The anticipated compensation range is 19.25 - 36.55 USD Hourly Actual compensation will be determined based on various factors including qualifications, education, experience, and location. The pay range is subject to change at any time dependent on a variety of internal and external factors. Kiss Nail Products, Inc., KDC GA Corp., Ivy Enterprises, Inc., AST Systems, LLC, Red Beauty, Inc., or Dae Do, Inc. (collectively, the “Company”) is an equal opportunity employer and is committed to a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

This is an entry level position in manufacturing engineering as part of our manufacturing training and development program. This position will provide an excellent developmental opportunity in operations and manufacturing combined with practical hands on projects contributing directly to the performance and success of the company. This position develops and improves manufacturing processes by studying product and manufacturing methods as well as drives product and process changes to reduce cost and lead time and improve quality and delivery. The position will include a mentorship and corporate exposure. Roles and Responsibilities: • Support manufacturing production processes with all required technical needs. • Develop and improve manufacturing processes by deploying product and manufacturing method enhancements. • Determine product and process manufacturing flow and sequences, material and labor requirements, and quality inspection points. • Create and maintain manufacturing routers and processes • Must be able and willing to work extra time as necessary to ensure completion of assigned tasks Experience in a manufacturing environment desirable.

Trexquant is a growing systematic fund at the forefront of quantitative finance, with a core team of highly accomplished researchers and engineers. We are in the process of optimizing and reimagining our quant platform to keep pace with our expanding trading operations. To support our rapid growth, we are seeking a talented C++ Trading & Simulator Engineer to join our growing technology team and help build the next generation of trading systems and analytics platforms. As a C++ Trading & Simulator Engineer, you will work closely with quantitative researchers and traders to design, develop, and optimize high-performance systems for algorithmic trading. Your responsibilities will include building and maintaining the core infrastructure for trading simulations, data pipelines, and low-latency execution platforms. The ideal candidate will have a strong background in C++ development, and experience in creating scalable, low-latency, high-throughput systems. Requirements A degree in Computer Science, Engineering, Mathematics, or a related field, 2+ years of experience writing production-quality code in C++ (C++ 17/20) with a deep understanding of data structures, algorithms, concurrency patterns, and numeric processing Experience designing, implementing, and optimizing low-latency and high-throughput systems, particularly for financial applications. Experience with Python programming is a plus. Experience in alpha/strategy research infrastructure or data pipeline development is a big plus Responsibilities Design, build, and maintain the infrastructure for quantitative research, backtesting, and strategy deployment, including data pipelines, computation engines, and integration with trading systems. Continuously optimize the infrastructure to support large-scale data processing and complex model computations. Develop and optimize data loading and transformation pipelines to ensure efficient access to high-quality data for analysis and model development. Create tools and automation scripts to streamline research workflows, including model training, evaluation, and deployment. Collaborate closely with quantitative researchers and traders to understand their needs and deliver technical solutions that enhance research productivity, backtesting accuracy, and trading performance. Provide ongoing support to researchers and traders, ensuring clear documentation for tools, systems, and processes. Benefits Competitive salary plus bonus based on individual and company performance. Collaborative, casual, and friendly work environment. PPO Health, dental and vision insurance premiums fully covered for you and your. Dependents. Pre-tax commuter benefits. Weekly company meals. Applications are now open for our NYC office, opening in September 2026. The base salary range is $175,000.00 to $200,000.00, depending on the candidate's educational and professional background. Base salary is one component of Trexquant's total compensation, which may also include a discretionary, performance-based bonus. Trexquant is an Equal Opportunity Employer

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: Manufacturing Engineering Internship: In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: * Learn and understand state-of-the-art methods of manufacturing, * Support manufacturing and repair processes for component hardware and/or overall engine assembly, * Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls * Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives * Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment * Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: * Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding * Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) * Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations * Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: * Aeronautical/Aerospace Engineering * Ceramic Engineering * Chemical Engineering * Civil Engineering * Computer Engineering * Computer Science * Electrical Engineering / Electrical & Computer Engineering * Engineering Technology (various) * Fiber/Polymer Science * Industrial Engineering * Manufacturing Engineering * Materials Science/Engineering * Mechanical Engineering * Systems Engineering * Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, collaborative teamwork * Problem solver: analytical-minded, challenges existing processes, critical thinker * Comfortable working in a fast-paced shop floor environment around various machine tools and equipment * Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering * Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Are you looking for a new challenge? Passionate about innovation? Want to work for a global company that values integrity, teamwork, and loyalty? At LATICRETE International, we aim to be the leading construction brand trusted globally for high-performance tile and stone installation systems and building finishing solutions. We've been in business for over 65 years, family-owned for three generations, and can be found in over 100 countries. The Hartford Business Journal even named us one of Connecticut's top family-owned companies in 2017! We don't just make innovative, industry-leading products. Our purpose is to improve the built world and the lives of those who build it. We strive to connect with, engage with and improve the lives of our employees, our customers, our partners, and the global communities in which we operate. We are seeking passionate and ambitious employees who want to make a difference not just within our organization, but within their communities, our industry, and the world. If that sounds like you, then what are you waiting for? Join the family and expand your horizons! Just some of our benefits: Medical Dental Vision 401k Tuition reimbursement 13 paid holidays in addition to paid vacation and sick time Flexible spending Life Insurance, AD&D and Supplemental Insurance 1 week paid plant shutdown between the Christmas and New Year's Day holidays POSITION SUMMARY The Project Engineer will apply engineering techniques and provide engineering services in the design, specification, construction and start-up of new and improved production process, equipment, buildings and support systems. This role will be responsible for recommending manufacturing equipment and processes designed to be efficient, cost-effective, and to promote safety, quality and reliability. The Project Engineer will assess current equipment and processes and make recommendations for changes. This role will also be expected to troubleshoot and repair equipment, show results in reports and train personnel in equipment usage and processes. This role is an individual contributor and will be expected to work independently with a high degree of latitude. 1. Capital Project Design (40%): Develop and administer the capital plan defining project initiatives based upon business/operational needs or opportunities. Lead the scope, cost and schedule development of capital projects and prepare justifications for expenditures with cost benefit analysis. Lead in preparing layout designs and equipment and facility specifications to meet the requirements of the process or desired improvement. Design, evaluate and select equipment and exchange information with vendors, suppliers and contractors to ensure accurate specifications, quotes and delivery schedules. Capital Project Management (40%): Create and maintain timelines on projects to assure they are completed on schedule. Ensures the accurate and timely management of change to scope, schedule and cost for assigned projects. Ensures assigned project meet agreed to scope on schedule and within budget. Ensure all LATICRETE processes, equipment, buildings and facilities support systems are in compliance with or exceed all applicable Federal, State and local environmental, safety & health and OSHA regulations and building/construction codes and reporting requirements. Coordinate and direct installation of equipment and services with equipment suppliers, service contractors, operations and maintenance personnel. Support start-up of manufacturing processes and equipment including transitioning of responsibilities to Operations after project scope has been met. Ensure the accurate and timely processing of purchase orders, invoices, cost and expenditure accounting and tracking data and other financial records for Project Engineering activities. Ongoing Operational Support (20%): Develop work instructions and provide for the documented training of operators and maintenance personnel on all new and improved equipment and support systems implemented and assist in the design of preventive and corrective maintenance programs and spare parts inventories. Identify, develop and implement process improvement initiatives that reduce waste and non-value added activities. Manages Effectiveness (OEE); production efficiencies, yields and rates. Handles the most complex issues and problems and refers only the most difficult and complex issues to higher-level staff. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: Bachelor's degree in Engineering; Mechanical, Industrial, Chemical or Civil preferred 5+ years' experience in a process manufacturing environment Specialized Skills and Experience: Plans, organizes and guides projects and team members May be called to consult in other areas Advanced Analytical / Problem-solving skills Experience in the design, specification, acquisition, installation and start-up of new and improved industrial processes, equipment, buildings and support systems. Excellent communication (oral and written) and interpersonal skills. Highly organized in project scheduling, executing responsibilities and prioritizing in a multitask environment. Self-starter, able to work alone with limited supervision. Team player - maintain positive, cooperative attitude with all employees of LATICRETE and all customers. Ability to build collaborative relationships. Computer skills: Advanced knowledge of Microsoft Office (Word, Excel) and Outlook, AutoCAD; Microsoft Projects. Travel Requirement: Must be able to travel 25-50% depending on business needs. Physical Requirements: Must pass pre-employment physical. Lift: Physical ability to lift and/or carry a minimum of 25 lbs. and occasionally as much as 65 lbs. Must be able to climb stairs (including open mesh) with varying degrees of pitch to elevations up to 150 ft. Push/Pull: Must be able to push/pull 50 pounds. Stand: Must be able to stand 75% of the day. Sitting: Must be able to sit 25% of the day. Twisting/Bending: Must be able to twist/bend 50% of the day. Squatting, Climbing and/or Crawling: Must be able to squat/climb/crawl 50% of the day.

The Manufacturing Engineer, develops, evaluates, and improves manufacturing methods. Utilizes knowledge of product design, materials, tooling, fabrication process, and production equipment capabilities, assembly methods, and quality control standards. Duties and Responsibilities Analyzes and plans work force utilization and workflow. Estimates production times, staffing requirements, and related costs to provide information for management decisions. Communicates manufacturing capabilities, production schedules, or other information to facilitate production processes. Communicates with customers in order to determine specifications of components. Participate in quoting process. Support Control Plan (CP) development, including inspection methodology, prevention controls, detection controls, reaction plans, inspection frequency rationale, and ongoing monitoring. Understand project schedules for all projects that are within the department. Education Preferred 4Year/ Bachelors Degree in Mechanical Engineering or related field Experience 3-5 years experience with Manfuacturing Engineering work KSA's Strong written and verbal communication skills. Excellent customer teaming and interpersonal aptitude.Strong computer skills including excellent Word, Excel, PowerPoint, and Minitab skills. Ability to determine and meet deadlines. Ability to work independently as well as part of a team. Analytical thinking skills. Strong problem solving, decision making, and process improvement skills. Proficient blue print reading and GD&T knowledge. PhysicalDemands Frequent sitting, frequent standing, frequent walking. Use hand/fingers to grasp/pinch/grip Occasional climbing (stairs/ladders) or balancing. Occasional stoop, kneel, crouch, or crawl. Occasional operating of machinery and/or hand power tools. Compensation Employee Type: Salaried Salary Minimum: $90,000 Salary Maximum: $115,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) ###-####.

Trexquant is a growing systematic fund at the forefront of quantitative finance, with a core team of highly accomplished researchers and engineers. We are in the process of optimizing and reimagining our quant platform to keep pace with our expanding trading operations. To support our rapid growth, we are seeking a talented C++ Trading & Simulator Engineer to join our growing technology team and help build the next generation of trading systems and analytics platforms. As a C++ Trading & Simulator Engineer, you will work closely with quantitative researchers and traders to design, develop, and optimize high-performance systems for algorithmic trading. Your responsibilities will include building and maintaining the core infrastructure for trading simulations, data pipelines, and low-latency execution platforms. The ideal candidate will have a strong background in C++ development, and experience in creating scalable, low-latency, high-throughput systems.