Mechanical design engineer jobs in Danbury, CT - 297 jobs

Project Engineer will assist with design development of commercial, institutional and residential related projects. Design experience should include layout, grading, water, wastewater, stormwater and other infrastructure facilities. Occasional field visits for purposes of investigations and construction phase support services. Essential Job Functions: Site design and layout of vehicular and pedestrian circulation, parking and loading. Roadway design, including street and sidewalk plans and profiles. Utility design, including plans and profiles of water and sanitary sewer services. Drainage and stormwater management design in accordance with NYSDEC requirements. Grading and erosion control plans. Proficiency with AutoCad/Civil 3D to assemble and manage AutoCAD set of design plans. Coordinate with subconsultants regarding geotechnical services, landscape and lighting plans. Construction administration and observation services. Assist with developing application packages to be submitted to municipal board for review that comply with the following: SEQR review, including compliance with SEQR procedural requirements. State and Federal environmental laws. Local zoning, subdivision and land use regulations. Local and generally accepted design and engineering standards. Consistency with a municipality's Comprehensive Plan or other relevant Planning reports Oversight of entry level Assistant Project Engineers and technicians including, but not limited to, delegation of tasks, promoting quality standards, scheduling and coordinating of project deliverables. Job Requirements: Bachelor's degree in civil engineering from an ABET accredited institution. A Professional Engineer (P.E.) license in New York State or ability to obtain is required. 5-10 years of experience in a similar role. Excellent verbal and written communication skills are required. Strong organizational skills are required. Proficient with AutoCAD/Civil 3D software preferred. Ability to multi-task and work under pressure in a fast-paced environment. Ability to work efficiently, both independently and in a team environment. Knowledge of construction methods of general excavation, pavement and utility installation. Knowledge of federal, state and local permitting and the process involved. Ability to verbally present site plans and reports to municipal land-use boards. Contribute to a Project Manager's preparation of proposal scope & fees. Knowledge is a plus for hydrologic and hydraulic modeling and design of stormwater management systems. Certifications in CPESC and CPSWQ is a plus. Pay Range: Albany - $44/hour - $60/hour Poughkeepsie - $44/hour - $63/hour Westchester - White Plains - $47/hour - $66/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. Qualifications EducationBachelors of Engineering (required) ExperienceProficient with AutoCAD/Civil 3D software (preferred) 5 - 10 years: Experience in a similar role. (required) Licenses & CertificationsProfessional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

ARKA Group L.P. (“ARKA”) is an advanced technologies company serving the U.S. military, intelligence community, and commercial space industry delivering next-generation solutions to support the national security space enterprise. Built on more than six decades of excellence, ARKA brings modern approaches and a culture of innovation to the challenges of today. Join the ARKA team to learn how Beyond Begins Here. Discover your next career opportunity now! Position Overview: Our Student Program provides amazing opportunities to develop functional job skills and gain real-world experience and expertise. We offer spring, fall and year-round internships and co-ops in fields across the company, including engineering, finance, and business development. We are currently seeking a student enrolled in Henry Abbot Technical School in the Mechanical Design and Engineering Technology program to join our Engineering department as a Year-round Intern. Responsibilities: This position requires an entry level designer/drafter to apply technical skills for moderate complexity interdisciplinary tasks. You will be responsible for producing tooling and related flight hardware within an integrated product team It is expected you will work autonomously with moderate oversight and be accountable for both space flight and non-space flight development program milestone deliverables Basic Qualifications: Enrollment in Henry Abbot Technical School in the Mechanical Design and Engineering Technology program Create part models, assembly layouts, detailed drawings, and bills of materials using CREO for solid modeling and PDMLink for data management Execute engineering design changes for part and assembly drawings Interact and coordinate with all engineering disciplines to deliver comprehensive design, engineering, and specification packages Preferred Qualifications: General understanding of GD&T Location: Danbury, CT This position is based onsite at our facility in Danbury, CT. Located in beautiful Fairfield County, Danbury offers a diverse economy, wonderful parks, cultural attractions, an impressive mix of private and public educational institutions and a vibrant arts scene. Our facility is nestled among a remarkable selection of communities to call home all with varying price points to fit many different budgets. We're close to New York City, Boston, and other major cities - great for day trips and weekend getaways. Our lovely seasons along with award-winning institutions, colleges, cultural events, and a genuine sense of community brings a diverse population to the beautiful state of Connecticut! When you choose to join the ARKA Student Program, you will: Gain hands-on experience in your chosen field and share your unique ideas and creative problem-solving skills to help us continue our legacy of innovation Flourish and seamlessly develop great relationships with co-workers Network with students from other universities Participate in activities that support our local communities Work alongside our talented team, including employees who started as interns or co-ops Enjoy companywide employee activities Receive competitive compensation and paid holidays EHS/Environmental Requirements: This job operates in a professional office environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of the time. This would require the ability to move around the campus and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. To apply, send a request to ***************** or contact ************ and press 2 for Human Resources. ITC & Security Clearance Requirements: This position requires the incumbent to access export-controlled information. If you are not a U.S. Person, any offer is contingent upon the Company's ability to obtain a special license granting you access. This could take several months. You will not be able to begin employment until such license is obtained. Visa Restrictions: No visa sponsorship is available for this position. Pre-employment Screenings: Employment with any ARKA companies in the U.S. is contingent upon satisfactory completion of several pre-employment requirements to include a credit check, background check, and drug screen.

IntroductionASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, and more energy-efficient microchips. We design, develop, integrate, market, and service these advanced machines, enabling our customers-the world's leading chipmakers-to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics.We are currently recruiting for an internship located at our office in Wilton, CT.Your AssignmentThis position is for a Production Engineering First Line Support (FLS) Intern with an innovative attitude. The intern will provide support to the mechanical/mechatronics production engineering team, including: Data analysis, procedure writing, factory floor troubleshooting, and continuous improvement projects. Spending time in the cleanroom providing direct support to production processes and conducting time studies when needed. Working in an office environment on continuous improvement and process development for production. Projects are tailored to candidate skills and can include: Automation enhancements and programming Tooling and design improvements Cycle time reduction initiatives Supporting troubleshooting and improvement of mechanical assembly and alignment issues, module testing, final quality concerns, and manufacturing tooling challenges. Performing analysis on mechanical performance data and deriving actionable conclusions. Evaluating and dispositioning failed parts with proposed solutions. Assisting in the development of manufacturing procedures and technical work instructions, as well as participating in design and document reviews. Your Profile Pursuing a Bachelor's or Master's degree in Mechanical Engineering, Mechatronics Engineering, or a related field. (minimum of 3 years completed) SkillsWorking at the cutting edge of technology means new challenges and problems to solve every day-and collaboration is key. You'll be part of a creative, dynamic work environment where you'll work with supportive colleagues and have the flexibility to choose how best to tackle tasks.To thrive in this role, you'll need: Ability to read and interpret mechanical drawings and technical documentation. Familiarity with CAD tools (e.g., SolidWorks, NX) and mechanical design principles. Knowledge of mechatronic systems, actuators, sensors, and precision motion control is a plus. Experience with data analysis tools such as MATLAB, LabVIEW, or Python is beneficial. Understanding of manufacturing processes, tolerances, and assembly techniques. Ability to learn and apply new information quickly. Strong attention to detail and accuracy. Ability to work on multiple projects and communicate solutions effectively. Other InformationThis position is located on-site in Wilton, CT. It requires in-person presence for work-related events, training courses, and meetings to ensure teamwork, collaboration, and innovation.Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

Job DescriptionBenefits: Free food & snacks Help or transport service Opportunity for advancement Jr Mechanical Engineer 10-12 yrs project Onsite All transp from anywhere to location paid All food and lodging paid for entire duration $62-76 p/h EFPTP24 US Citizenship Required Full-Time Office/Project Work Location: Ogden, UT US Citizenship Required Job Summary: In this role, you will participate in the design, development, and evaluation of mechanical components and processes. You will collaborate and support other engineering disciplines for mechanical matters. Your professional work knowledge and abilities through the application of standard mechanical engineering techniques and criteria will enable you to make impactful contributions to the team. Major Responsibilities: Level 1 Participates in the design, development, modification and evaluation of mechanical components and processes used utilizing relevant Engineering Department Procedures (EDPs), design standards and guides, and Bechtel Standard Application Programs (BSAPs) Compiles, adjusts, and correlates data that will develop professional work knowledge and abilities through the application of standard mechanical engineering techniques, procedures and criteria utilizing relevant Engineering Department Procedures (EDPs), design standards and guides, and Bechtel Standard Application Programs (BSAPs) Provides input to and/or maintains technical logs and records Coordinates work and collaborates with other engineering disciplines Provides direct support to other engineering disciplines for mechanical related matters Coordinates development and presentation of material when requested Prepares or assists in preparation of conceptual studies, designs, reports, or proposals Level 2 Evaluates, selects, and applies standard mechanical engineering methods, techniques, procedures, and criteria, using independent judgment in making adaptations and modifications Provides technical assistance to other mechanical personnel and will interact with project functions, the customer, and regulatory agency personnel in the resolution of complex regulatory issues and industry codes and standards Provides assistance to project and construction management in identifying and complying with project mechanical requirements and in addressing issues as they arise during project execution Education and Experience Requirements: Level 1 Requires a bachelor's degree in Mechanical, Chemical, or Nuclear Engineering with 1-2 years of experience Level 2 Requires a bachelor's degree in Mechanical, Chemical, or Nuclear Engineering (or international equivalent) and 2-5 years of relevant experience Required Knowledge and Skills: Passed Engineering in Training/Fundamentals of Engineering Examination in USA (Mechanical or related Engineering). Experience working with procedures meeting quality assurance programs such as AS9100. Possess active security clearance or ability to obtain security clearance. Basic knowledge of developing CSI Masterformat specifications, or Unified Facilities Guide Specifications using SpecsIntact Basic knowledge of mechanical system design, including sizing and equipment selection, piping and instrumentation diagrams, and requirements verification Business Unit: Nuclear, Security & Environmental

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Mechanical Engineering Intern 2026Summer Intern Program Location: Hamden, CT Amphenol Spectra-Strip is enabling the electronics revolution with wire and cable solutions. We are the market leader for products that power the internet, cloud compute and artificial intelligence. We make components that run at 224Gbps per lane and can download 100 full length HD movies in a single second. Amphenol is a great place with outstanding engineers working on the fastest signals, with all the software and equipment needed to be successful. We are currently seeking a Product Development Engineer to join our team to lead product innovation in design, validation, and launch phases. RESPONSIBILITIES: This role supports our Mechanical Engineering group. You will work closely with internal engineers and manufacturing personnel, supporting the development and validation of product prototypes through polit production. This position also works within the production area, creating and testing designs. What you'll do: Gain Experience! Support the product design effort through analysis, testing, and deployment Generating detailed technical drawings Gather test data to support R&D activities Support production with fixture designs Identify process deficiencies and help develop solutions to improve those deficiencies QUALIFICATIONS: A good candidate should be at least a sophomore in a Mechanical Engineering program Experience with solid modeling tools (SolidWorks) Ability to communicate with technical & non-technical people Ability to work in team environment Amphenol Corporation is proud of our reputation as an excellent employer. Our main focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at ****************************

Job Description RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $8.9 billion. JOB TITLE/LOCATION: Applications/Design Engineer ~ Oxford, CT DESCRIPTION: The RBC Division is in search of an Application / Design Engineer to be located in our corporate office in Oxford, CT. The successful candidate will be responsible for both design and application of spherical plain bearings reporting to the SPB Product Engineering Manager. ESSENTIAL FUNCTIONS OF THE JOB: Work directly with RBC customers to satisfy their application needs. Support our external sales and business management personnel by making visits to customers to promote RBC's capabilities. Convert customer requirements into bearing designs. Derive application loading, cycles, and other operating conditions relevant to the bearing application. Based on these inputs, select or alter existing bearing designs to meet customer requirements. Develop new bearing designs as needed Participate in DFMEA, PFMEA events related to product / design application When needed, develop bearing testing requirements for validation of a proposed design. Work closely with test engineers in conducting validation testing Develop manufacturing, grinding, and assembly drawings using SolidWorks. Understand heat treatment specifications as they relate to the bearing designs. Work directly with our manufacturing plants to ensure the proper production of the product designed. Work with the manufacturing division personnel to develop methods of bearing inspection. Other duties as assigned. EDUCATION: Bachelor's degree in Engineering required, Mechanical Design preferred. EXPERIENCE: 3-10 years as Mechanical Engineer or related experience. Bearing experience is preferred. Strong mechanical aptitude SKILLS / CERTIFICATIONS: Bachelor's Degree in an engineering field. Mechanical Engineering preferred. US citizenship is required. Strong mechanical aptitude. Excellent communication skills, capability to interact with customers. 3D Modeling experience in SolidWorks (or equivalent) is desired. Proficiency with Microsoft Office Programs. Travel Approximately 25% We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. Interested candidates may send resumes to: ************************** RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

Quanex is looking for a Design Engineer to join our team located in New Haven, CT. Come join the Quanex Access Solutions Team (Bilco) where you can be a part of a growing team! The Bilco Brand manufactures a complete line of products that provide access for commercial building applications. Products are available in a number of standard sizes and are custom engineered to meet unique access requirements. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Design Engineer? * Responsibility for product development within a Lean environment, engineering documentation for all product lines, and product review and testing. * Work in collaborative environment. * Be a part of a growth oriented business. What Success Looks Like: * Initiating product design and innovation. * Ensure that products comply with all applicable codes and regulations. * Determining feasibility of manufacture and modifications necessary to alter construction of a specific product to accommodate customer requirements. * Supporting engineering staff in testing of new product prototypes, or new design applications to customer specifications. * Interacting with customers and meeting their needs. What You Bring: * Bachelor of Science degree in Mechanical Engineering or Industrial Engineering * 5+ years of product development experience * Excellent verbal and written communication skills * The ability to work closely with other engineers and others, including external customers, in a team environment. * Experience with root cause problem solving and driving improvements to designs and processes. * Experience with Solidworks and AutoCAD. The targeted salary range for this position is $78,000-$90,000 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #LI-LG1

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $8.9 billion. JOB TITLE/LOCATION: Applications/Design Engineer ~ Oxford, CT DESCRIPTION: The RBC Division is in search of an Application / Design Engineer to be located in our corporate office in Oxford, CT. The successful candidate will be responsible for both design and application of spherical plain bearings reporting to the SPB Product Engineering Manager. ESSENTIAL FUNCTIONS OF THE JOB: Work directly with RBC customers to satisfy their application needs. Support our external sales and business management personnel by making visits to customers to promote RBC's capabilities. Convert customer requirements into bearing designs. Derive application loading, cycles, and other operating conditions relevant to the bearing application. Based on these inputs, select or alter existing bearing designs to meet customer requirements. Develop new bearing designs as needed Participate in DFMEA, PFMEA events related to product / design application When needed, develop bearing testing requirements for validation of a proposed design. Work closely with test engineers in conducting validation testing Develop manufacturing, grinding, and assembly drawings using SolidWorks. Understand heat treatment specifications as they relate to the bearing designs. Work directly with our manufacturing plants to ensure the proper production of the product designed. Work with the manufacturing division personnel to develop methods of bearing inspection. Other duties as assigned. EDUCATION: Bachelor's degree in Engineering required, Mechanical Design preferred. EXPERIENCE: 3-10 years as Mechanical Engineer or related experience. Bearing experience is preferred. Strong mechanical aptitude SKILLS / CERTIFICATIONS: Bachelor's Degree in an engineering field. Mechanical Engineering preferred. US citizenship is required. Strong mechanical aptitude. Excellent communication skills, capability to interact with customers. 3D Modeling experience in SolidWorks (or equivalent) is desired. Proficiency with Microsoft Office Programs. Travel Approximately 25% We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. Interested candidates may send resumes to: ************************** RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

We are seeking a skilled Electromechanical Engineer to design, develop, and maintain electromechanical systems and products. The ideal candidate will have a strong background in both electrical and mechanical engineering principles and will collaborate with cross-functional teams to deliver innovative solutions. Key Responsibilities: Design & Development: Create detailed designs for electromechanical systems, including circuit designs and mechanical layouts. Prototyping: Develop and test prototypes, utilizing hands-on techniques to validate design concepts. Collaboration: Work closely with electrical and mechanical engineers to ensure seamless integration of systems. Testing & Validation: Conduct performance testing and troubleshooting to ensure product reliability and compliance with industry standards. Documentation: Prepare and maintain technical documentation, including design specifications, test reports, and user manuals. Project Management: Assist in project planning and management, including timelines, budgets, and resource allocation. Continuous Improvement: Identify opportunities for product and process improvements and implement solutions to enhance efficiency and performance. Compliance: Ensure all designs and processes adhere to relevant safety and regulatory standards. Qualifications: Education: Bachelors degree in Electromechanical Engineering, Mechanical Engineering, Electrical Engineering, or a related field. A Masters degree is a plus. Experience: 5 years of experience in electromechanical design and engineering. Skills: Proficient in CAD software (e.g., SolidWorks, AutoCAD). Strong knowledge of electrical circuits and mechanical design principles. Excellent problem-solving and analytical skills. Strong communication and teamwork abilities.

At the New York Power Authority, you will be empowered to think big, do good, and transform the energy industry. We are a collaborative team of over 2,400 energy technologists, IT specialists, business experts, hydro engineers, and diverse professionals leading the energy revolution. With state-of-the-art technology, advanced research and development, a modernized infrastructure, and a focus on environmental, social and governance (ESG), we provide New Yorkers with low-cost, clean, reliable power - and we are well on the way to becoming the first end-to-end digital utility in the country. Mechanical Engineering is primarily responsible for the entire fossil fleet and balance of plant of the hydro facilities. This includes high and low energy systems including high pressure steam, pneumatic controls, system lube oils, fire suppression, aero-derivative solutions for power production, liquid and gaseous fuel systems, governor control systems, advance monitoring systems of pressure, temperature, and flow rates, protective coating systems, and crane lifting and hoisting devices. Our paid 10-week Summer Developmental Internship program runs from June 2 - August 7, 2026. As an Intern, you will receive professional development, on-the job experience in the energy industry, exposure to executives, and networking opportunities to help build a solid foundation for your future career. Applications will close on February 15, 2026. If you are passionate about our mission - to lead the transition to a carbon-free, economically vibrant New York through customer partnerships, innovative energy solutions, community engagement and the responsible supply of affordable, clean, and reliable electricity, we are looking for you! #LI-KM1 Responsibilities Participate in department-specific projects, analysis, research methods and learn project management skills Support team in developing business solutions that contribute to NYPA's VISION2030 strategic goals Research industry trends and emerging technologies to contribute to the continuous improvement of our programs Other projects as assigned; will vary based on focus area Knowledge, Skills and Abilities Proficiency in Microsoft Office programs, especially Excel, PowerPoint, Outlook Excellent verbal and written communication skills Strong organizational skills and ability to multi-task with competing priorities Ability to work both independently and collaborate as part of a team Provide positive customer service for internal and external stakeholders Education, Experience and Certifications Enrollment in an associate's, undergraduate or graduate program at a college or university is required. Recent graduates are not eligible for our Developmental Internship program. Must be legally eligible to work in the United States for the duration of the internship from June 2 - August 7 Physical Requirements The New York Power Authority is committed to providing fair, competitive, and market-informed compensation. The hourly rate for this position is based on the level of education at the time the intern program begins: LEVEL HOURLY RATE Sophomore $17.50 Junior $21.50 Senior (or May 2027 graduate) $21.50 Current graduate/law student $24.50 The New York Power Authority and Canal Corporation believes that diversity, equity, and inclusion drive our success, and we encourage women, people of color, LGBTQIA+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents and veterans to apply. As an equal opportunity employer, NYPA/Canals is committed to building inclusive, innovative work environments with employees who reflect communities across New York and enthusiastically serve them. We proudly celebrate diversity and do not discriminate based on race/color, creed/religion, national origin, citizenship or immigration status, age, disability, military status, gender/sex, sexual orientation, gender identity/expression, pregnancy and related conditions, familial/marital status, domestic violence victim status, predisposing genetic characteristics, arrest/criminal conviction record or any other category protected by law. NYPA/Canals will also provide reasonable accommodations during the hiring process related to candidates' disabilities, pregnancy-related conditions, religious observances/practices and/or domestic violence concerns. To request an accommodation, please email accessibility@nypa.gov.

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Job Description Supports the manufacture of products to ensure Operations core metrics are successfully achieved. Provides technical leadership and support of manufacturing improvements and floor support for assigned product lines. Principal Accountability: Provides engineering support for troubleshooting efforts for any process issues in designated area. Summarize and draw conclusions from test results leading to effective technical resolution of process problems. Develops and maintains the documentation necessary to ensure the consistent manufacture of MITG products (processes, drawings, and shop floor paperwork). Works with Process Development engineers to ensure design for manufacturing elements are incorporated into PDP activities. Identifies, justifies, and implements significant data driven projects to reduce manufacturing costs, improve processes, increase product reliability, and enhance process capability. Designs and evaluates new and existing fixtures and equipment, test methods, specifications, layouts, and standards supporting a Lean manufacturing environment. Identify and recommend manufacturing technologies to strategically develop business objectives and potential opportunities. May have supervisory responsibility for technician staff. Comply with applicable FDA and international regulatory laws/standards and the MITG Code of Conduct. Other duties as assigned or required Additional Information Please contact: Sagar Rathore ************ ******************************

At Ramboll, you will find a dedicated group of professionals that are pioneers and leaders in Data Center Strategy, Planning, Design, Integration, Commissioning and Testing with Experience working in thousands of data centers in the U.S. territory and across the globe. We provide a broad set of services for enterprise, institutional, webscale, service provider and colocation companies. Our team of consultants assist clients in understanding how to bring data closer to their own customers, bringing all components of IT and the facility together, and enable rapid deployment of a solution that achieves critical objectives. We believe we are strongly positioned to create flexible environments that can easily adapt to changes and disruptions -- while eliminating risks and creating efficiencies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation. Inviting bright minds Do you want to push the boundaries of your profession and develop your excellence in an open, collaborative and empowering culture? We work to create a sustainable future and our inspiring projects and innovative solutions strive to set the standard among our peers. You will join a global company that has been growing successfully since its founding in 1945. Together, we lead and leave a positive impact on societies, companies and people around the world. Responsibilities for Mid-level Plumbing/Fire Protection Engineer: The successful candidate shall be able to work independently with minimal supervision from a Sr. Plumbing/Fire Protection engineer for tasks as follows: Development of Plumbing and Fire Protection Construction documents (drawings, specifications. calculations. etc.) using computer software for new and retrofit buildings/projects in the mission critical environment for review by Sr. Engineer. Experience with design of Plumbing and Fire protection systems in mission critical facilities. Work on multiple projects simultaneously. Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients. Coordinate with other building disciplines (architectural, structural, electrical, civil, etc.) to ensure compatibility with the design intent. Assists with the development of job specific discipline specifications. Perform field survey to document existing conditions and/or observation of construction activities. Engages in the development of a design through sketches, electronic models, diagrams, and other visual formats. Performs and oversees the performance of calculations using company standard software, and proprietary manufacturer software. Preparation of Contract Documents using Revit and AutoCAD software. Create technical drawings, plans, and specifications for review by Sr. Engineer Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors Ensure project timelines are met, and project stays within budget Able to travel (Light travel for project meetings/site observations). Qualifications for Plumbing/Fire Protection Engineer Bachelor's degree in mechanical engineering EIT/PE a plus 5+ years' experience designing plumbing and fire protection systems, Mission Critical design experience a plus Strong computer skills and skilled in software typically used in plumbing/fire protection design (i,e. hydraulic calculations). Proficient in Revit, AutoCAD and Microsoft Office programs; Revit Experience is a must. Ability to communicate effectively and clearly Must be self-motivated and know project design steps/requirements Excellent organization and planning skills. Excellent written and verbal communication skills A sound knowledge of engineering fundamentals. Working knowledge of building, plumbing and fire codes. EYP Mission Critical Facilities has become part of Ramboll, sustainable engineering, architecture, and consultancy company founded in Denmark in 1945. Today Ramboll operates from 300 offices in 35 countries, many in the fastest-growing regions for data center expansion - including a strong presence in the Americas. Joining with Ramboll positions us to offer services to clients anywhere in the world, from site selection through to full design and commissioning. Additional Information Work at the heart of sustainable change Ramboll is a global architecture, engineering, and consultancy company. We believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that's where we start - and how we work. At Ramboll, our core strength is our people, and our history is rooted in a clear vision of how a responsible company should act. Being open and curious is a cornerstone of our culture. We embrace an inclusive mindset that looks for fresh, diverse, and innovative perspectives. We respect, embrace, and invite diversity in all forms to actively cultivate an environment where everyone can flourish and realize their full potential. Ready to join us? Please submit your application. Be sure to include all relevant documents including your CV, cover letter, etc. We recognize that some candidates only apply when they tick every box. However, passion and potential often outweigh a perfect resume and Ramboll's supportive learning culture can help you grow. So if this role resonates with you but you don't meet all the requirements, we encourage you to apply. You might be the perfect fit for this opportunity or another within our team. Thank you for taking the time to apply! We look forward to receiving your application. An equal opportunity employer Equality, diversity, and inclusion is at the heart of what we do. At Ramboll, we believe that diversity is a strength and that different experiences and perspectives are essential to creating truly sustainable societies. We invite applications from candidates of all backgrounds, regardless of age, disability or medical condition, gender identity, marriage and domestic partnership, pregnancy and maternity, race, ancestry, or national origin, religion or belief, sex and sexual orientation, military service and veteran status, or any other protected characteristic. Ramboll wants to ensure opportunities are accessible to candidates with disabilities. Please reach out to our recruitment team to discuss any adjustments that you might require during the application process. Salary Transparency Statement At Ramboll, your base pay is only part of your overall total compensation package. At the time of this posting, this role is likely to be compensated at an annual rate between $95,000 - $115,000. Actual pay may be more or less than the posted range, depending on numerous factors, including experience, geographical location, internal equity, market conditions, education/training and skill level, and does not include bonuses, overtime, or other forms of compensation or benefits.

OVERVIEW:Crestron Electronics is dedicated to attracting exceptional emerging professionals by investing in resources and creating new opportunities for hands-on learning, professional growth, and career development in a supportive work environment. As a result, we have an exciting opportunity for a Summer 2026 Intern to join our Industrial Design Team in Rockleigh, NJ. Candidates must be commutable to Rockleigh, NJ. This role has been designated as a 100% onsite work arrangement. Crestron Interns and Co-Ops can expect to be challenged with meaningful projects and tasks alongside professionals and subject matter experts in the field. Interns and Co-Ops are assigned a dedicated mentor who will be responsible for their development and acclimation to the company. Crestron will also provide a variety of training and networking opportunities to participants in the program, seeking to present participants with a comprehensive experience that enhances technical and non-technical skill sets and to prepare students for their professional careers. Crestron is an equal opportunity employer proud of its commitment to Diversity & Inclusion. Our formal Summer Internship program will begin in late-May / early-June and continue through mid-August. Over the past several years, our internship program has led to dozens of full-time offers to program alumni. We are committed to helping participants in the program succeed in their future by providing opportunities for growth and advancement. RESPONSIBILITIES General aptitude and willingness to learn the following: • Use artistic creativity to develop and design products that are at the forefront of technology.• Understand the product requirements and translate them into design concepts using 3D CAD in line with the Crestron design DNA.• Work closely with Mechanical and Hardware team to develop feasible concepts. • Professional presentations using rendering software to accurately depict the design intent.• Generate graphic artwork when needed. • Specify color, material and finish. QUALIFICATIONS General Requirements• Must be enrolled in a college or university working toward a bachelor's or master's degree in Industrial Design. o Junior or Senior level in an undergraduate program preferred.• Must be able to commute to and from the Rockleigh, NJ area for the duration of the internship period.• Must have permanent, unrestricted work authorization in the United States now and in the future. Technical Skills• 3D CAD Modeling (Creo preferred). • Rendering using Keyshot or an equivalent software package a plus.• Creative, accurate professional with attention to details in design concepts.• Adobe Illustrator skills a plus. Other Skills• Must be responsible, self-motivated, creative, have a solid work ethic and have a desire to produce a quality product.• Strong communication skills (verbal, non-verbal, written, and listening) with the ability to articulate work at different levels of the organization.• Strong problem-solving skills.• Ability to prioritize tasks and handle numerous assignments simultaneously.• Positive, professional who is able to work cohesively with others across various divisions.

The Product Development Engineer will design new products, improve existing products, and build prototypes for our Accessories, Bags, UTV and Snowmobile Cover division. The Engineer should be capable of developing products from concept to final production. The right candidate should be extremely hands-on and visually oriented with the ability to conceptualize and design complex 2-D and 3-D geometric shapes. Duties/Responsibilities: Drafts product designs according to customer, client, or company specifications using 2-D concept renderings and 3-D CAD drawings. Adapts existing product designs to meet new specifications and applications. Assists with construction of prototypes. Tests prototypes to verify product reliability; makes adjustments as required. Develop sewing patterns with corresponding product specification drawings/tech packs to ensure a complete, detailed, and accurate sample build. Assists the engineering department in resolving product issues or production difficulties. Performs other related duties as assigned. Qualifications What You Bring to the Table: Creative & Analytical Mindset - Strong drafting, problem-solving, and visualization skills. Tech-Savvy Expertise - Proficiency in Adobe Illustrator, CAD software, and Microsoft Office Suite. Manufacturing Knowledge - Familiarity with materials, manufacturing processes, and product testing. Hands-On Experience - A portfolio showcasing your ID drawings and model-making skills. Team Player - Strong collaborative and relationship-building skills to work seamlessly across departments. Lean Manufacturing Know-How - Applied experience in lean production methodologies. Preferred Qualifications: Education: Bachelor's Degree in Industrial or Product Design (or related field). Experience: Minimum 3 years in product development or a related engineering role. Software Proficiency: Ability to quickly learn new design tools and programs. Industry Knowledge: Experience with plastic & foam molding processes (injection, vac-form, compression, extrusion). Bonus Points: If you love riding ATVs, UTVs, Snowmobiles, or PWCs, you'll fit right in! Why Join Us? At Commercial Sewing, we believe in pushing boundaries and creating products that excite and inspire. When you join our team, you'll enjoy: ✅ A collaborative and innovative work environment. ✅ Opportunities to bring your ideas to life. ✅ A supportive team that values your creativity and technical skills. ✅ Travel opportunities to explore, test, and refine new products. Work Environment & Physical Requirements: Primarily office-based with occasional hands-on prototype work. Must be comfortable working at a computer for extended periods. Ability to lift up to 15 pounds when needed. Ready to design the future and be part of something amazing? Apply now and let's build something extraordinary together!

Fleet Engineer The Fleet Engineer supports the Assistant Port Engineer in the maintenance, repair, and regulatory compliance of all American Cruise Lines' (ACL) certificated vessels and launches. The Fleet Engineer provides immediate response for critical repairs to the portion of the ACL fleet assigned, to ensure the vessels remains safe and on schedule. The Fleet Engineer must be familiar with all vessel machinery, equipment and systems. This individual is responsible for following established safety practices while performing assigned duties to protect self, workers, and the public from personal injury and to prevent damage to ACL's property and the environment. This position reports directly to the regional Assistant Port Engineer. At American Cruise Lines, we are driven by our values-Optimism, Commitment, Patriotism, and Merit. These values shape our culture, our service, and our people, guiding us as we work together to Share America's Story on the Finest American Ships. Responsibilities: Take supervision and direction from the Assistant Port Engineer and Port Engineer. Provides support and coverage to Assistant Port Engineers. Identifies and troubleshoots technical vessel problems and provides fast solutions to minimize downtime. Expedites vendors for critical repairs. Coordinates and communicates with Marine Operations for critical repairs and determines a timeline for resolution. Manages warranties and coordinates extended warranties for technical equipment. Ensures competitive bidding and negotiates costs on purchases. Manages expenses and assists with the annual winter maintenance budget. Maintains responsibility for record keeping, including machinery history, parts inventory and reporting data to the Assistant Port Engineer. Coordinates large scale projects such as ship refits and dry dockings. Visits each ship at least three times a month. One of these visits shall include a full ship condition inspection. Provides technical information and guidance to shipboard Engineers and crew directly, as directed by the Assistant Port Engineers. Interfaces with Marine Operations and Hotel Operations. Ensures vessel compliance with all USCG, USPH, FDA, EPA, and other federal regulations Performs other duties as directed. Attributes for Success: Ability to identify, manage, and solve problems. Ability to act with urgency to completed time sensitive tasks. The ability to diagnose machinery malfunctions and recommend a course of corrective action. Ability to read and understand blueprints and machinery systems' technical manuals. The ability to work on various computer programs including Microsoft word, Excel and HelmConnect. Ability to read and understand repair manuals. Mechanically inclined. Proficient with hand and power tools. Knowledgeable of diesel and gas engines. Ability to learn and take direction from port engineer. Licenses and Registrations: Valid driver's license. Possess a Valid TWIC (Transportation Worker Identification Card). Required Education and Experience: Must be at least 18 years old. High school diploma or equivalent or equivalent related experience. Typical Work Environments: This position includes a high level of travel to Fleet concentration areas. Frequently underway time for short durations performing, testing, inspections, ship checks, and other events as needed. Travel up to 80% of the time. Vendor maintenance shops, paint shop, various buildings and storage areas. Vessel engine room, bow thruster space and various void spaces throughout vessel. Additional Requirements: Subject to a background investigation. Subject to a pre-employment physical. Ability to frequently traverse stairs, fixed ladders and ladder-wells while walking ships on a daily basis. Wherewithal to spend several consecutive days at sea while underway as needed. Capable of sitting for long periods of time, standing, walking, crouching and kneeling. Reaching, handling, using equipment, keyboards and mobile devices. Lifting boxes (files and supplies) up to 20 lb. Why Join American Cruise Lines? At American Cruise Lines, our people are the driving force behind our success. As the nation's leader in U.S. river cruising, we're experiencing rapid growth - and we're investing in top talent to grow with us. When you join our team, you'll find a dynamic work environment that values innovation, collaboration, and excellence, with real opportunities to build your career and make an impact.

Job Purpose: Design and implement efficient manufacturing processes and systems that optimize production while maintaining quality and cost-effectiveness. Support technical problem-solving and coordinate new process implementation using Lean Manufacturing principles. Key Responsibilities: Manage manufacturing launch for new/revised products Create and update BOMs and routings in production systems Design manufacturing processes and equipment to improve capability and quality Create / update manufacturing instructions as designs are improved Develop and test tools and machinery for improved manufacturing methods Solve production workflow issues (bottlenecks, machine reliability, waste reduction) Prepare facility/equipment layouts using CAD software Provide technical guidance for manufacturing activities Collaborate with Engineering, Purchasing, and global teams Prepare feasibility studies and cost justifications Monitor production and implement efficiency improvements Requirements: Bachelor's Degree in Engineering (Manufacturing Engineering preferred) Knowledge of machine design, welding, and special processes Strong leadership skills and self-motivation Statistical Process Control (SPC) implementation ability Proficiency with 3D CAD (SolidWorks or Creo a plus) and MS Office Strong Tooling and Fixture design Preferred Qualifications: 5+ years manufacturing experience Lean Manufacturing experience or certification Oil & Gas industry experience Understanding of GD&T and dimensioning Travel Requirement: This role may require domestic and potentially international travel of up to: #LI-KP1

Project Engineer will assist with design development of commercial, institutional and residential related projects. Design experience should include layout, grading, water, wastewater, stormwater and other infrastructure facilities. Occasional field visits for purposes of investigations and construction phase support services. Essential Job Functions: Site design and layout of vehicular and pedestrian circulation, parking and loading. Roadway design, including street and sidewalk plans and profiles. Utility design, including plans and profiles of water and sanitary sewer services. Drainage and stormwater management design in accordance with NYSDEC requirements. Grading and erosion control plans. Proficiency with AutoCad/Civil 3D to assemble and manage AutoCAD set of design plans. Coordinate with subconsultants regarding geotechnical services, landscape and lighting plans. Construction administration and observation services. Assist with developing application packages to be submitted to municipal board for review that comply with the following: SEQR review, including compliance with SEQR procedural requirements. State and Federal environmental laws. Local zoning, subdivision and land use regulations. Local and generally accepted design and engineering standards. Consistency with a municipality's Comprehensive Plan or other relevant Planning reports Oversight of entry level Assistant Project Engineers and technicians including, but not limited to, delegation of tasks, promoting quality standards, scheduling and coordinating of project deliverables. Job Requirements: Bachelor's degree in civil engineering from an ABET accredited institution. A Professional Engineer (P.E.) license in New York State or ability to obtain is required. 5-10 years of experience in a similar role. Excellent verbal and written communication skills are required. Strong organizational skills are required. Proficient with AutoCAD/Civil 3D software preferred. Ability to multi-task and work under pressure in a fast-paced environment. Ability to work efficiently, both independently and in a team environment. Knowledge of construction methods of general excavation, pavement and utility installation. Knowledge of federal, state and local permitting and the process involved. Ability to verbally present site plans and reports to municipal land-use boards. Contribute to a Project Manager's preparation of proposal scope & fees. Knowledge is a plus for hydrologic and hydraulic modeling and design of stormwater management systems. Certifications in CPESC and CPSWQ is a plus. Pay Range: Albany - $44/hour - $60/hour Poughkeepsie - $44/hour - $63/hour Westchester - White Plains - $47/hour - $66/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. Qualifications EducationBachelors of Engineering (required) ExperienceProficient with AutoCAD/Civil 3D software (preferred) 5 - 10 years: Experience in a similar role. (required) Licenses & CertificationsProfessional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Are you a problem-solving, results-driven engineer with a passion for optimizing manufacturing processes? We're looking for a Manufacturing Engineer to play a key role in our Product Development Process, ensuring efficient production of high-quality products while maintaining cost control. What You'll Do: ✅ Collaborate with engineers, operations teams, and management to optimize manufacturability ✅ Establish, document, and maintain manufacturing processes and Bills of Operation in ERP (Epicor) ✅ Ensure data accuracy and support production floor activities ✅ Participate in daily engineering and project team meetings ✅ Work hands-on with CAD software (SolidWorks preferred) to enhance designs What You'll Need: 🔹 Bachelor's Degree in Engineering or equivalent experience 🔹 5+ years of manufacturing experience 🔹 Strong understanding of CAD software (SolidWorks preferred) 🔹 Knowledge of manufacturing processes, cost control, and quality assurance 🔹 Excellent problem-solving, decision-making, and time management skills 🔹 Passion for innovation, teamwork, and continuous improvement Why Join Us? ⭐ Work on diverse and exciting projects in a fast-paced environment ⭐ Be part of a team that values creativity, accountability, and excellence ⭐ Competitive pay, benefits, and career advancement opportunities If you're ready to take your engineering expertise to the next level, apply today! 🚀

This is an entry level position in manufacturing engineering as part of our manufacturing training and development program. This position will provide an excellent developmental opportunity in operations and manufacturing combined with practical hands on projects contributing directly to the performance and success of the company. This position develops and improves manufacturing processes by studying product and manufacturing methods as well as drives product and process changes to reduce cost and lead time and improve quality and delivery. The position will include a mentorship and corporate exposure. Roles and Responsibilities: • Support manufacturing production processes with all required technical needs. • Develop and improve manufacturing processes by deploying product and manufacturing method enhancements. • Determine product and process manufacturing flow and sequences, material and labor requirements, and quality inspection points. • Create and maintain manufacturing routers and processes • Must be able and willing to work extra time as necessary to ensure completion of assigned tasks Experience in a manufacturing environment desirable.