Mechanical design engineer jobs in Fontana, CA - 1,148 jobs

Immediate Mechanical Engineering opportunity! For immediate consideration, please apply directly to this job posting AND email me at habels @actalentservices.com with the following: 1) word copy of resume 2) 2-3 professional references 3) 4-5 brief bullet points highlighting technical qualifications Job Description Join our dynamic team as a Mechanical Engineer, where you will play a pivotal role in the product development and execution team. You will be responsible for providing hands-on engineering expertise in the development of various electromechanical assemblies for government customers. You will oversee product development from design to production, collaborating closely with the R&D team on prototype builds, testing, and analysis. Responsibilities + Assess Technical Data Package (TDP) to formulate design, validation, and production strategies. + Develop and maintain program-specific Design Failure Mode and Effects Analyses (DFMEAs). + Lead change control, technical issue resolution, and program engineering deliverables for sub-components and final assemblies. + Conduct Design Reviews and Design for Manufacturing (DFM) analyses. + Coordinate, support, and create 2D/3D designs in SolidWorks to package sub-components into overall system assemblies. + Develop and execute Design Verification Plan (DVP), including reviewing government validation requirements, creating test procedures, planning test equipment calibration and fixtures, and performing engineering testing. + Support component and assembly builds from initial prototype through full production launch. Essential Skills + Expert proficiency in SolidWorks for design and manufacturing, particularly in electromechanical assemblies such as gears, pumps, motion systems, and metallic components. + 5-8+ years of mechanical design engineering experience with a Bachelor's degree, preferably within the aerospace and defense industry. + Experience with Design to Production, full life cycle, new product introduction, and concept development. + Proficiency in GD&T and tolerance stack-up analysis. Additional Skills & Qualifications + Experience launching new models/products through certification and into production. + Advanced and recent hands-on CAD knowledge; SolidWorks strongly preferred. + Experience in engineering risk management tools such as DFMEA and PFMEA. + Hands-on experience with testing, including test setup, calibration, writing test procedures, and reporting. + Experience with designing electrical content like wiring harnesses and PCBA. + Strong communication, presentation, and interpersonal skills. + Technical with understanding of military product developments and standards. + Ability to perform Finite Element Analysis (FEA) in SolidWorks. Work Environment Work in a fast-paced, collaborative environment that values autonomy and innovation. Our culture is free of politics and provides the freedom to diversify and select projects. We are a leading provider of cutting-edge military technologies, committed to excellence and innovation in designing, manufacturing, and delivering high-performance solutions for clients worldwide. Job Type & Location This is a Contract to Hire position based out of Tustin, CA. Pay and Benefits The pay range for this position is $50.00 - $60.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tustin,CA. Application Deadline This position is anticipated to close on Jan 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking a Senior Payload Design Engineer (Level 4) to support our OoP Payloads Design Engineering (DE) team based in Seal Beach, California. The OoP Payloads DE team is responsible for Continued Operational Safety Program (COSP), Safety Related Problem (SRP); as well as support to BGS Spares, Service Engineering and Production Engineering changes for OoP aircraft. This role is integral to our commitment to safety and compliance with FAA regulations. The ideal candidate will possess a deep understanding of payload design principles, aircraft performance, and regulatory requirements, ensuring that our aircraft meet the highest safety standards. Position Responsibilities Works with the OoP Chief Program Engineer (CPE) office as the Responsible Engineer on COSP/SRP projects related to Payloads for OoP aircraft Organizes design reviews with SMEs, formulates path forward with findings and prepares technical presentations for executive review boards of potential safety items Reviews Engineering documents for past design Creates design solutions for SRPs, interfaces with suppliers for development, test and production activities Supports BGS Spares and Service Engineering Develops, maintains and modifies interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle Works under minimal direction Basic Qualifications (Required Skills/Experience) Bachelor of Science degree from an accredited course of study in engineering (with a focus on Mechanical, Civil, Aerospace, Aeronautical or Material Sciences). 5+ years' experience using CATIA v5 and ENOVIA. 5+ years' experience with commercial aircraft program. Experience with multiple payloads / interiors commodities and systems (Cabin, Cockpit and Cargo) 9+ years' experience in payload design or related engineering roles within the aerospace industry, specifically in commercial airplane programs. Preferred Qualifications (Desired Skills/Experience) 10+ years' experience in payload design or related engineering roles within the aerospace industry, specifically in commercial airplane programs with credentials to recognize candidate as a SME and industry expert. Experience leading a team of engineers with responsibility for the cost, schedule, and technical quality of their output. Experience developing and mentoring other engineers and teams. Experience reviewing/approving Service Bulletins. Experience creating standardized documentation and processes. Other Information Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards and Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $135,150 - $182,850 Applications for this position will be accepted until Feb. 09, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education: Bachelor's Degree or Equivalent Required Relocation: This position offers relocation based on candidate eligibility. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Shift: This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. #J-18808-Ljbffr

We are currently seeking a high-caliber Mechanical Engineer for a direct basis within our client's team of experienced professionals. Located in Newport Beach, California. This privately owned engineering firm, established in 1979 and based in Seattle, offers multidisciplinary services including civil, structural, mechanical, and electrical engineering. With around 500-1,000 employees and offices across the U.S., it serves a wide range of sectors such as commercial, industrial, and government. Known for its collaborative culture and technical depth, the firm balances local responsiveness with national expertise. It has earned recognition in industry rankings and is expanding into sustainable and renewable energy solutions, including microgrids and hydrogen systems. Job Overview: Our client is seeking a Mechanical Engineer with 5 - 10 years of experience. The successful individual will have an interest in the design of HVAC, piping and plumbing systems for hospitals, commercial buildings, and industrial facilities. In addition, the individual should be comfortable consulting architectural practices and have a desire to work on a multi-discipline engineering team. Qualifications BS in Mechanical engineering or related field PE license in Mechanical Engineering (Preferred) Minimum 5 years of experience Experience with AutoCAD and Revit Excellent verbal and written communication skills PREFERRED QUALIFICATIONS Familiarity with relevant codes: mechanical, energy, plumbing Familiarity with both HVAC and Plumbing systems Experience with energy modeling software (EnergyPro, etc.) KNOWLEDGE, SKILLS & ABILITIES Must be a self-starter who is able to see the big picture and connect the vision of the company with his/her job, be persistent, and follow through in a consistent manner. Passionate about the client or pursuit and takes ownership of his/her work. Able to multi-task and prioritize in a fast-paced environment (or demonstrate ability to develop such abilities). Possess strong critical thinking, organizational, and analytical abilities (or demonstrate ability to develop such abilities). Maintain positive working relationships with internal and external customers. Proficiency in Microsoft Outlook, Word, Excel and Adobe InDesign software preferred. Must understand database concepts. Working knowledge of marketing databases and proposal resources files. General knowledge of firm's practice, clientele, goals, policies, and procedures. Basic understanding of A/E/C industry terminology and procedures and basic marketing principles. Able to work independently, as a team member, and as a team leader. Strong organizational ability; detail oriented; high degree of accuracy. Must work well under pressure. Positive contributor to overall office and department goals, culture, and morale.

Day to day: A client of Insight Global is looking to hire a AV Design Engineer to join their team in the Southern California region. This is a pre-sales position focused on designing and scoping AV solutions in collaboration with the sales team. The ideal candidate is customer-facing, detail-oriented, and thrives in a fast-paced, solution-driven environment. Responsibilities include: Partner with Account Managers to develop AV solutions tailored to customer needs. Conduct site walks and attend architectural meetings to gather project requirements. Write detailed scopes of work outlining system functionality and installation plans. Explain AV system designs clearly to customers using tools like Bluebeam and AutoCAD. Collaborate with internal AutoCAD department for drawing production. Estimate installation timelines and labor budgets based on AV construction knowledge. Read and interpret architectural drawings to inform design decisions. Conduct peer reviews of other DE drawings. Maintain a professional demeanor and communicate effectively with clients and internal teams. Must-Haves: 5 years of design experience in commercial integrations experience Creating good scopes of work (want example scopes of work to show)- post first interview (could do being conference rooms and then doing one of a technical space) Strong understanding of AV construction and system integration. Proficiency in Bluebeam and familiarity with AutoCAD workflows, any of PDF editing tool, adobe, fox IT Knowledge of AV over IP Good client/ customer facing experience Willing/ Able to travel in the Southern California area CTS Certification Nice-To-Haves: 10+ years in the AV Industry (Either commissioning, programming, engineering, etc) CTS-D Certification Experience in broadcast simulation, more specialized spaces Familiarity with government contracts (Sled, fed) Backend knowledge of Zoom and Teams Certifications with any of the key manufacturers (QYSC, Crestron, Extron) Deeper knowledge of network infrastructure

We are seeking a Plumbing-focused MEP Design Engineer to join our consulting design team. This role leads plumbing system design while collaborating closely with mechanical and broader MEP disciplines to deliver coordinated, high-quality projects. Key Responsibilities Lead plumbing design (domestic water, sanitary, storm, gas, specialty systems) from concept through construction Manage plumbing-led scopes, schedules, budgets, and client coordination Prepare calculations, equipment selections, and construction documents compliant with codes (UPC/IPC) Coordinate with mechanical, electrical, fire protection, and architectural teams Support mechanical (HVAC) coordination/design as needed Participate in BIM/Revit workflows, site visits, RFIs, and construction administration Mentor junior staff and support QA/QC and proposal efforts Qualifications BS in Mechanical Engineering or related field CPD required (or in progress); PE preferred or on path 5-7+ years of plumbing design experience in an MEP consulting environment Strong knowledge of plumbing codes and systems Proficient in AutoCAD and Revit Collaborative, organized, and client-focused

Qualifications: Designing with FPGAs and microcontrollers. Familiarity with MIL-STD-1553 communication protocols and aerospace/defense standards is a highly desirable, but not required. Experience with SoC (System on Chip) design and integration. Proficiency in Embedded C development. Embedded Development: Design and develop firmware and software using SoCs, PLDs, and FPGAs. Responsibilities: Develop low-level software drivers and high-level applications to ensure seamless hardware-software communication. Lead the testing, integration, and troubleshooting of prototypes to ensure field reliability.

Why Anderson Howard? Anderson Howard is a leader in electrical, low‑voltage, lighting, and controls solutions for commercial, entertainment, mission‑critical, and large‑scale development projects. You will be joining our lighting team to support complex, architecturally significant installations requiring expert coordination, technical oversight, and flawless execution. We pride ourselves on precision and keeping our customers' businesses LIVE™. What You'll Do As a Lighting Project Engineer, you'll support and report to our Lighting Project Manager to collaborate with project teams to deliver high‑quality lighting and lighting‑control systems on fast‑paced, detailed and complex projects. Key Responsibilities Lighting Coordination Assist with lighting / lighting control submittals, releases, lead times, RFIs and shop drawings, fixture schedules, and controls integration planning with PM and field team. Collaborate with vendors and project teams to keep installations aligned with project goals. Procurement & Fixture Management Track long‑lead lighting fixtures, deliveries, packing slips, and vendor discrepancies. Support staging, inventory management, and documentation for incoming shipments. Project Documentation & Support Assist PM team in preparation of RFIs, design clarifications, and lighting‑related change orders. Maintain lighting tracking sheet and issue logs and categorize responsibilities across internal teams, design teams, and vendors. Support close‑out: O&M manuals, as‑builts, fixture lists, and controls documentation. Field & BIM/VDC Coordination Review lighting mock‑ups, field conditions, and quality checks. Collaborate with preplanning to ensure drawings align with updated shop drawings. What You Bring 2-4+ years experience in electrical construction Familiarity with lighting systems, fixture submittals, lighting controls and technical documentation. Ability to interpret electrical and architectural drawings. Experience with Bluebeam, Revit/BIM (preferred), and Microsoft 365. Experience with Autodesk Build preferred. Strong communication and organizational skills with the ability to thrive in a dynamic, fast-moving project environment. Why You'll Love Working Here Opportunity to work on complex, high‑visibility projects featuring advanced lighting and controls systems. A collaborative environment with strong mentorship and career‑growth path.

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. ABOUT THE TEAM Anduril's Lattice software platform integrates together many sensors into a single cohesive view of the world, providing needed context for our users. AI Engineers on Anduril's Frontier AI team build edge-compatible, generative AI systems into the Lattice software platform to provide features and products that improve autonomy and reduce cognitive burden on the warfighter. Specific applications include but are not limited to automating mission planning, battle-space understanding, voice-control of assets, and enabling higher-levels of autonomy. WHAT YOU'LL DO Distill and fine-tune transformer architectures so they can be deployed onto edge devices or compute denied environments Propose and prototype LLM-based Agentic systems that help solve real world problems, leveraging the latest state-of-the-art techniques in the field Develop and maintain mission relevant benchmarks Work cross-functionally with different business lines across Anduril to help discover and scope new research problems REQUIRED QUALIFICATIONS BS in Computer Science, Machine Learning, Electrical Engineering, or related field 5+ years experience developing and benchmarking ML algorithms Experience pushing and maintaining ML algorithms in production Strong Python skills with experience in ML frameworks such as PyTorch Eligible to obtain and maintain an active U.S. Secret security clearance PREFERRED QUALIFICATIONS Experience fine-tuning transformer-based model Experience deploying deep-learning based models to edge devices or air gapped environments Prior experience in defense tech or start-up US Salary Range $220,000 - $292,000 USD The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Healthcare Benefits US Roles: Comprehensive medical, dental, and vision plans at little to no cost to you. UK & AUS Roles: We cover full cost of medical insurance premiums for you and your dependents. IE Roles: We offer an annual contribution toward your private health insurance for you and your dependents. Additional Benefits Income Protection: Anduril covers life and disability insurance for all employees. Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs. Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. Professional Development: Annual reimbursement for professional development. Commuter Benefits: Company-funded commuter benefits based on your region. Relocation Assistance: Available depending on role eligibility. Retirement Savings Plan US Roles: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options. UK & IE Roles: Pension plan with employer match. AUS Roles: Superannuation plan. The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process. To view Anduril's candidate data privacy policy, please visit ********************************************** #J-18808-Ljbffr

Applied Medical is a new-generation medical device company with a proven business model and commitment to innovation fueled by rapid business growth and expansion. Our company has been developing and manufacturing advanced surgical technologies for over 35 years and has earned a strong reputation for excellence in the healthcare field. Our unique business model, combined with our dedication to delivering the highest quality products, enables team members to contribute to a larger capacity than is possible in typical positions. Position Description The senior machine design engineer, automation leads the design and development of automated machines and manufacturing processes that support the production of innovative medical devices at Applied Medical. This role contributes directly to manufacturing scalability, process efficiency, and product quality by delivering robust automation solutions from concept through commercialization. In addition to hands‑on technical leadership, the senior machine design engineer, automation provides project leadership by guiding cross‑functional teams, mentoring engineers, and ensuring automation designs meet technical, quality, and business requirements. Key Responsibilities Design automated machines and manufacturing processes in accordance with defined technical, quality, and safety standards. Lead cross‑functional project teams by managing timelines, assigning work, and providing clear technical direction throughout project execution. Review engineering and quality documentation to ensure compliance with Applied Medical manufacturing quality systems and project requirements. Collaborate with internal partners and guide outside department team members to enable effective information transfer and project alignment. Specify off‑the‑shelf machines and automated production equipment to support manufacturing and process needs. Identify and specify production lines that require automation to improve efficiency, quality, and scalability. Mentor and guide entry‑level engineers by reviewing work, providing technical feedback, and supporting professional development. Partner with internal functional teams and external vendors to deliver integrated automation solutions. Success in This Role Looks Like Delivering automated manufacturing systems that meet performance, quality, and safety requirements. Leading projects from concept through commercialization with clear direction, accountability, and execution discipline. Strengthening engineering capability through mentorship, technical guidance, and knowledge sharing. Ensuring engineering documentation and designs meet regulatory, quality, and operational standards. Driving collaboration across engineering, manufacturing, quality assurance, and vendor partners. Contributing automation solutions that support long‑term operational efficiency and business growth. Position Requirements Holds a bachelor of science degree in an engineering discipline. Designs and troubleshoots fixtures, prototypes, and automated machines incorporating electro‑mechanical components such as sensors, safety systems, pneumatics, and drive systems. Designs, modifies, and troubleshoots complex automated manufacturing equipment. Updates and reviews three‑dimensional computer‑aided design models using SOLIDWORKS and maintains accurate bills of materials using Microsoft Excel. Performs design of experiments to determine optimal equipment parameters and process performance. Writes and updates maintenance manuals, manufacturing instructions, and calibration procedures for new and existing equipment. Understands and follows Applied Manufacturing quality systems per training requirements. Understands and complies with company safety rules and policies. Brings greater than five years of experience in automated machine design. Works in clean room, laboratory, and manufacturing environments as required. Holds equivalent hands‑on experience as an engineering technician or machine designer in lieu of a formal degree when applicable. Brings experience leading automation projects in regulated manufacturing environments such as medical device production. Demonstrates proven ability to guide junior engineers and drive technical excellence across teams. Applies strong problem‑solving skills to complex, multi‑variable automation challenges. Benefits Competitive compensation range: $100000 - $120000 / year (California). Comprehensive benefits package. Training and mentorship opportunities. On‑campus wellness activities. Education reimbursement program. 401(k) program with discretionary employer match. Generous vacation accrual and paid holiday schedule. Please note that the compensation range may be adjusted in the future, and bonus and incentive compensation plans may apply. Our total reward package reflects our commitment to employee growth and well--being, as we invest in your development and offer a range of benefits designed to enhance your career and life. All compensation and benefits are subject to plan documents and written agreements. Equal Opportunity Employer Applied Medical is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (including pregnancy, childbirth, breastfeeding and related medical conditions), or sexual orientation, or any other status protected by federal, state or local laws in the locations where Applied Medical operates. #J-18808-Ljbffr

Fluids and Controls Business Unit The ideal candidate will have proven abilities to execute projects and implement program initiatives. The individual must demonstrate strengths in project coordination, design engineering, and on-time delivery of project deliverables. This position will manage ongoing new product development as well as sustaining/legacy programs which includes planning efforts, cross-functional coordination, scope management, stakeholder communication, and project performance tracking. Primary Responsibilities Leads engineering projects - coordinating all aspects to include: Project management & managing design phase processes. Facilitation of meetings & developing customer communications, etc. Focused on delivering projects on time and on budget. Facilitates a collaborative engineering approach by closely coordinating product development and qualification with cross functional participants and 3rd party supplier representatives as appropriate. Serves as the main point of contact for assigned projects, both internally and externally. Drives planning efforts for projects and programs and ensures compliance to company and regulatory standards as well as best practices. Supports the preparation of technical proposals for Requests for Information / Quotation. Establishes milestones and develops and owns program plans, schedules, and budgets. Reviews and presents plans and progress reports of the program(s) to both internal and external stakeholders. Identifies and mitigates project risks and issues. Interfaces with customers for project specifications and status meetings to ensure successful completion and maintain customer relationships. Interfaces with suppliers and vendors for external deliverables. Actively promotes product development process improvements. Actively participates in department initiatives and continuous improvement initiatives to optimize efficiency and quality. Maintains the highest ethical standards, even when challenged from peers and above. Understands and adheres to client's ethics and business conduct policies. Performs other duties as required to support the department, including: Product design, including CAD modeling and drawing creation. Product validation and qualification, including testing and creation of reports and analyses. *We are looking for someone who is also able to pull up their sleeves and contribute to the engineering design work as needed to contribute and complete project deadlines* Qualifications Bachelor's degree in Engineering or related field required. Minimum of 5 years direct project management and/or customer service experience in the Aerospace & Defense manufacturing environment. Minimum of 5 years design experience with electro-mechanical or fluids controls products. Strong business acumen and customer interaction experience, in both customer relationship management and development. Strong communication skills and ability to work in a team environment. Proficiency with Microsoft Office Suite, including Project, Word, Excel, and PowerPoint. Proficiency with Solidworks. Must be able to travel domestically/internationally when requested. Highest levels of personal integrity and honesty. Preferred Qualifications PMP Certification Advanced knowledge in Microsoft Office Suite, including Project, Word, Excel, and PowerPoint

Local General Engineering Contractor seeks a Project Engineer for paving, grading, and underground projects. Ideal candidate should possess a minimum of 2 years of related project management and/or estimating skills. RESPONSIBILITIES: The Project Engineer is responsible for ensuring construction work complies with safety, specifications, cost guidelines, reporting requirements and field engineering activities for assigned projects. Major focus will vary depending on project needs and priorities. Maintains positive relationships with owners, community members and project team members. DUTIES: Able to perform all essential Project Engineer responsibilities. Attend and document project meetings. Set up and maintain electronic filing system as needed. Update and maintain all drawings, specifications and logs. Maintain a site-specific safety plan and pre-task planning process, including audits, meeting, training, etc. Review, analyze, and transmit submittals. Prepare and maintain submittal logs and procurement log. Perform expediting functions. Cost code and/or verify correct codes on time sheets. Code Accounts Payable workflows as assigned. Verify original estimate quantities for labor cost reports. Report quantities in place and maintain labor cost report. Prepare and document extra work orders. Review and assemble change order submittals and quantity surveys. Maintain record set drawings. Document punch list work. Complete other responsibilities as assigned. MINIMUM SKILLS: Bachelor's Degree in Construction Management or related field of study 2 years' work and field experience preferred. Construction related internship experience preferred. Basic understanding of construction cost accounting, estimating, and scheduling skills. Experience with HCSS, HeavyBid, Procore ideal, not required. Ability to read and understand plans and specifications. Effective organizational skills, strong work ethic, and eager to learn. Valid driver's license and reliable transportation.

We are currently looking for a Construction Project Engineer who is ready to engage in a large alternative delivery (CMGC) project in Los Angeles County. This project is a multi-year project that will add bus lanes from North Hollywood to Pasadena. This widening will increase BRT lanes and capacity. It will be the largest, most impactful BRT CMGC project in Southern California. The project is currently in Pre-Construction and when construction starts, the project size will be over $250 Million Dollars. This is a great opportunity to join the team as we are doing early work packages and prior to the project breaking ground, influencing project design, staging and contribute to the success of this critical project to improve mobility ahead of the 2028 Olympics. We are looking for a person that is capable of thinking outside the box, understands multi-staged construction projects, is detailed oriented with experience in heavy civil construction. The position is directly accountable for the safety, financial performance, and team development on site. This position will integrate with the project's civil team that focuses on MOT, Roadway, Concrete Pavement, Drainage, Electrical and Overhead Signs. Your role on the civil team will depend on your desires as well as strengths and previous experience. In addition to self-performing various scopes on the project the civil team will also cultivate and maintain strong relationships with the subcontractors, and suppliers as well LA Metro, Cities of Glendale, Los Angeles & Pasadena as well as third party Construction Management and Design Staff. Key Responsibilities: Work On Site to help solve problems that occur during construction Partner with Project Superintendent in development of a project site logistics plan Maintain thorough understanding of the Myers contract with Caltrans Monitor project costs and Job Cost Report Analyze and forecast monthly Total Cost Projection reports Monitor project labor Lead the project's quality process Develop, schedule and lead project teams on submittals, RFI's and Change Orders Develop and maintain effective relationships with the Designer, vendors, subcontractors and owners Implement all applicable Safety Programs. Qualifications: Bachelor's Degree in Construction Management or Engineering preferred 2+ Years of Experience in highly complex and related highway or structures construction projects in California. Experienced dealing with subcontracts, subcontractors and self-perform work Experience leading a successful project team, including development of employees and maintaining relationships with external entities Excellent organizational, team management, problem solving, motivational skills. Benefits: · Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable. · Company provided vehicle or car allowance and fuel card. · Flexible Spending Account (FSA)/Dependent Care FSA · 401K with 8% Match · Life insurance · Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D · Paid time off · Professional development assistance · Work in a collaborative environment that fosters creativity, support and mutual respect. Apply Here: ******************************************************************************* Myers and Sons Construction is a Heavy Civil Construction Company. We specialize in Bridge Construction, Bridge Restoration, Roadway Rehabilitation, Water/Wastewater Treatment Plants, Concrete Bridge Overlays, Concrete Paving and Alternative Delivery Projects, including Design Build, CMGC, CMAR and Progressive Design Build throughout California and Colorado. For more information on our company please visit ****************** Myers & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status

Our firm is representing a Southern California-based general contracting and design‑build organization known for its consistent, reliable project delivery. This client maintains a strong footprint across commercial, healthcare, laboratory/technical, industrial, and automotive markets, and is recognized for executing projects with exceptional quality, integrity, and adherence to schedule and budget. They uphold a culture rooted in excellence, collaboration, and transparency from project inception through completion. The team takes pride not only in the final product but also in delivering a clear, communicative, and well‑managed process. This employer seeks long‑term partnerships and is committed to being the trusted first choice for clients across all project types. About the role: As a Project Engineer, you will support the project team through all phases of construction, ensuring accuracy, organization, and proactive communication. Open to all levels of experience, this role offers an excellent opportunity to learn, contribute, and advance your construction career. This is an in‑office position with travel to project sites as needed. Key responsibilities include: Assisting with pre‑bid activities including subcontractor bid reviews, quantity takeoffs, and scope leveling. Managing plan check submissions, permits, and agency coordination while maintaining organized tracking logs. Conducting detailed job walks, reviewing bid documents, analyzing site conditions, and asking clarifying questions to support project success. Leading pre‑construction document reviews and building comprehensive submittal/MSDS logs; uploading and organizing plans, SKs, and addenda in Procore. Reviewing RFIs and submittals for compliance before sending for PM/Client approval; maintaining real‑time documentation in Procore. Supporting project closeout by gathering subcontractor documents, assisting with punch lists, reviewing site conditions, and ensuring accurate turnover packages. Required Qualifications: Minimum of 2 years of experience in commercial construction or a comparable field. High school diploma required (additional education preferred) Strong communication and organizational skills Ability to collaborate effectively with all team members, including Project Managers, Superintendents, Ownership, and Subcontractors. Detail‑driven with a proactive, problem‑solving mindset Preferred Qualifications: 2 years experience as a Project Engineer with a commercial General Contractor. Experience working on multiple large-scale projects concurrently. Ready to grow your construction career? Apply today for immediate consideration.

About the Role & Team Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe. Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us. Ride Development Engineering Design Assurance is an all-encompassing role that provides technical oversight and guidance in support of Ride project teams. As Ride engineering experts, they lead the way when it comes to process, standardization, and overall design compliance. Design Assurance Engineers work alongside our project teams to provide experience, knowledge, and expertise to help advance our projects. This role will work with the Executive Ride Development Engineering. This is a full-time role. What You Will Do: Serve as Mechanical Subject Matter Expert (SME) in the Ride Engineering design review process to ensure that appropriate engineering/design standards, methods, analyses, and judgment are applied so the engineered products meet the design intent and the business imperatives of safety, reliability, and efficiency. Review designs related to Ride Engineering products and provide feedback to project teams and functional management regarding the acceptability of those designs. Interpret and develop standards and codes that will be utilized by the Ride Engineering organization. Advocate global consistency of solutions for similar problems, and compliance with Disney and external standards. Partner with Disney leadership and project teams to improve process and standards for the benefit of future engineering efforts. Contribute to mentoring and talent development Required Qualifications & Skills Advanced engineering knowledge (e.g., statics, dynamics, kinematics, stress/strain/fatigue). Advanced engineering expertise (e.g., machine design, weldments, power train, materials). Proficiency with engineering tools (e.g., Solid Modeling, Building Information Modeling (BIM), 2D Modeling, FEA, Engineering calculation software e.g. Mathcad, Engineering programming and modeling software e.g. MatLab). Superior design sensibilities and creative problem solving. Excellent written & verbal communication skills. Ability to work collaboratively within a large and diverse team environment. Preferred Qualifications & Skills Previous Disney or entertainment experience, with advanced knowledge of the industry. Extensive experience with life safety design/requirements. Experience with prototype, development, and/or innovative products. Education Bachelor's Degree (B.S. or B.A.) in Engineering from an accredited college or university required. (Mechanical Engineering preferred) Additional Information: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at **************************************** #DXMedia This posting is seeking candidates to fill multiple roles in Glendale, California. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. - The hiring range/pay rate for Principal Ride Development Engineer is $139,200.00-$186,600.00 per year.

At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 23 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description We are seeking a dynamic and innovative Mechanical Engineering Intern for our Newport Beach office for full-time during the summer months of 2026. This is a great opportunity to learn more about your chosen field! The ideal candidate will be a student who wishes to increase their knowledge of commercial, institutional, healthcare and industrial mechanical and plumbing systems, learn about computer analysis software systems, CAD and Revit software, and work in a professional fast-paced environment. ESSENTIAL DUTIES AND RESPONSIBILITIES Work semi-independently. Possess basic level computer skills necessary for daily activities including email, word processing, spreadsheets, graphics, and a working knowledge of computer-aided drafting. Perform other duties as may be assigned. Qualifications KNOWLEDGE, SKILLS & ABILITIES Able to multi-task and prioritize in a fast-paced environment (or demonstrate ability to develop such abilities). Possess strong critical thinking, organizational, and analytical abilities (or demonstrate ability to develop such abilities). Excellent verbal, written and interpersonal communication skills. Proficiency in Microsoft Outlook, Word and Excel preferred. Positive contributor to overall office and department goals, culture, and morale. EDUCATION/EXPERIENCE 3 years of required courses completed towards an undergraduate mechanical engineering degree. Expected hourly range of $25-30. This position is not eligible for sponsorship. Additional Information Why You Want To Work Here Coffman truly focuses on its employees. We support and encourage individually tailored professional and technical advancement as well as personal growth. We offer an excellent salary and comprehensive benefits package (including eligibility for annual discretionary bonuses), a desirable location, and a professional office environment with the opportunity to work with a collaborative team. Don't take our word for it. Check out what others are saying: ********************************************************************** Coffman At A Glance: 45 years in business. 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations. Multi-discipline engineering services plus corrosion control, commissioning and project/construction management. 70+ employees in 9 offices, providing Fire Protection services since 2014. #34 Top 80 Engineering Firms, Building Design + Construction, 2022. #29 Zweig Group Hot Firm List, Zweig Group, 2021. #161 Top 500 Design Firms, Engineering News-Record, 2023. Applying You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide a reasonable accommodation. If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers; we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow us! *************** Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: ************************************************** Facebook: @CoffmanEngineers

About the Organization Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. Description JOB TITLE: Jr. Mechanical Engineer DEPARTMENT: Engineering REPORTS TO: Mechanical Engineering Manager EMPLOYEE TYPE: Full Time LOCATION: 19772 Pauling, Foothill Ranch, CA 92610 GENERAL JOB DESCRIPTION: Chroma Systems Solutions, Inc. is a leading designer and manufacturer of power testing instruments and systems including programmable AC Power Source and DC Power Supplies, AC loads and DC Electronic Loads, Digital Power Meters and Automated Testing Systems for applications in LED Lighting, Led Drivers, Aerospace, Defense, Military, Automotive, Medical, Battery, Solar, Marine, and Regulatory Testing. The Mechanical Engineer applies skills and knowledge needed to achieve a cost-effective, functional, and ergonomic design to the development of ATE Systems and test fixtures. This Engineer works in conjunction with Electrical Engineers in order to provide a fully custom solution that meets the customer's needs. ESSENTIAL DUTIES & RESPONSIBILITIES: * Provide detailed design information to management and projects. * Perform design activities for various interface panel projects. * Interface with other engineering disciplines as required. * Utilize 3D CAD Design Software (SolidWorks) to perform mechanical design of power systems with subcomponent Placemen, cabinet structural design for ATE Systems. * Jack-of-all-trades problem solver. * Research new design processes. * Assist in fixturing design. * Direct the fabrication, assembly of product, and work cell concepts being prototyped and implemented. * Prepare clear and concise documentation for CAD Drawings and Part List for systems or sub-Assemblies of a given project. * Development and creation of design sketches ready to be modeled. * Coordinate materials procurement. QUALIFICATIONS: * B.S. in Mechanical Engineering or relevant experience (1-2 years' experience). * Intermediate in SolidWorks CAD software. * Provable skills of CAD command (part, assembly, drafting). * Good English language skills. * Multidisciplinary technical knowledge is a plus. SUPERVISORY RESPONSIBLITIES: This is a non-supervisory position. PHYSICAL DEMANDS: General office skills and dexterity are required. Must be able to lift 30 pounds. CHROMA BENEFITS: * Bonus programs based on individual and company performance * Vacation, sick, bereavement time * Medical, dental, and vision plans for employees and dependents * Life insurance, AD&D, long term disability, and employee wellness programs * 401(k) retirement accounts with immediate vesting of company contributions * Profit sharing programs WORKING CONDITIONS: Chroma Systems Solutions is an Equal Opportunity Employer. All qualified applicants will receive equal consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, political affiliation, marriage or veteran status, and will not be discriminated against on the basis of disability. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Pay Range $25-$33.34 Tags BOM, SolidWorks, Mechanical, schematics, DraftSight, entry-level Location Pauling

Job DescriptionThe Company: VeSync is a portfolio company with brands that cover different categories of health & wellness products. We wouldn't be surprised if you have one of our Levoit air purifiers in your living room or a COSORI air fryer whipping up healthy and delicious meals for you every night. We're a young and energetic company, we've had tremendous success, and we are constantly growing our team. As we garner more industry attention - just check out our accomplishments and awards by CES Innovation, iF Design, IGA, and Red Dot - we also need driven and talented people to join our team. That brings us to you, and what you'll be joining. Our teams are smart and diligent and take ownership of their work - they're confident in their work but know how to collaborate with open ears and a spirit of learning. If you're down-to-earth, approachable, and easy to strike up a conversation with, this may be a great fit for you. Check out our brands:levoit.com \u007C cosori.com \u007C etekcity.com The Opportunity: At Vesync we're passionate about delighting consumers with products and services from our Levoit, Cosori, Etekcity and Arize brands. We're now looking for a Senior Product Design Engineer to help us shape a new Product Innovation Team in the heart of our biggest market, North America. Our Consumer Insights and User Experience teams contribute daily to the creation of exciting, new consumer products for our brands. Through our consumer-first approach we're now the number one choice in several major categories. Our growth will continue in our core categories, with the product innovation team focusing some efforts on new products in the adjacent space, however, our opportunity area of focus is in new categories that are supported by enabling technology resulting in smarter products that foster connected lifestyles, making life better for our consumers.Focused on new product creation, the Senior Product Design Engineer will support the Head of Product Innovation and be seen as a senior figure within the newly created team that drives front-end roadmap development in our existing categories as well as new categories. The role will sit in the sweet spot between Design and Engineering to create, prototype and test solutions that align with our established insights/experience, marketing and brand teams based in the US. Concepts will be created then tested with our consumers, prototyped and then validated in the US, with support from our R&D teams in China where required. When the product opportunity is well understood in terms of feasibility across design, engineering, culinary, marketing, brand, CI and legal we can then use the considerable resources of our China teams and suppliers to complete the detail design and manufacturing preparation.What you will do at VeSync: Technical Expert - You will be an authority on consumer product technologies, engineering principles (motorized & heated consumer products), solution selection, manufacturing techniques and material selection across multiple product categories. Builder of Things - Build proof-of-concept rigs with a combination of existing own brand components together with new 3D printed or CNC parts, then build custom micro-controller PCBA's or Arduino controllers to bring it all together that allows cross-functional teams to provide buy-in early to determine suitability on a product roadmap before moving into the internal development process. Communicate - You will be a strong and convincing communicator within the product innovation team, capable of making presentations with clean data that demystifies complex engineering studies in an easy-to-understand language for both the Head of Product Innovation, as well as leadership in the US and China. Consumer Insights - You will guide our design solutions by forming a complete picture of consumer needs and how new products will address these needs and create a delightful experience. Process Adherence - Our global IPD process, whilst continuously improving, is well understood and utilized by our teams in China. An important part of the role will be bringing a structured approach to projects to ensure seamless, accurate collaboration. Inspire - You will bring passion, creativity and drive to support a newly created team in product innovation across all of our consumer brands. What you bring to the role: Education - At least a Bachelor's degree in a relevant Engineering discipline, a BSc/MSc in Industrial Design Engineering is strongly preferred. This is NOT an Industrial Design role. Experience - 10+ years in Consumer Product design and development for international markets. This MUST include significant experience in motorized and heated products in categories such as: power tools, blenders, vacuum cleaners, air purifiers, ovens, air fryers, etc. Strong working knowledge of electrical and electronic controls. Hands-on experience designing and developing world-class, successful products from idea creation to proof-of-concept validation rigs, to the point of hand-over for detail design and manufacturing. Leadership - Previous responsibility for multi-disciplinary, technical teams working locally in the US or abroad with suppliers. IoT - many of our products are connected by our Vesync app. A good understanding of the consumer experience this enables is critical to the role. Attention to detail - we don't have time for a trial-and-error approach to design and development, we need to use intelligence and analysis to anticipate problems and get it right-first time. Market Experience - you will have a strong knowledge of the consumer product market in the US in some of our key categories with a deep understanding of brand and product value propositions. Resolve - The ability to listen carefully, ask questions, then understand sometimes complex issues and put forward a point-of-view on next steps is critical for success in this role. Salary Starting at $150,000 Annually Location Tustin, CA Perks and Benefits: 100% covered Medical/Dental/Vision insurances for employee AND spouse + dependents! 401K with 4% employer match (eligible after 90 days of employment) and immediate 100% vesting Generous PTO policy + paid holidays Life Insurance Voluntary Life Insurance Disability Insurance Critical Illness Coverage Accident Insurance Healthcare FSA Dependent Care FSA Travel Assistance Program Employee Assistance Program (EAP) Fully stocked kitchen

Job Description We are looking for a motivated, analytical and knowledgeable Aerospace engineer to assist our team as we develop designs, and test our flying houses. You will work on drafting proposals for innovative new designs, help test materials and prototypes, investigate part or product failures and damage, and develop innovative new products, parts, and materials. You may also take part in research and help create specialized production processes or facilities. ???? *Main responsibilities * • Receive design requests and draft designs • Work collaboratively with team members to verify efficiency and functionality of designs • Utilize drafting tools to test and verify designs • Research and report on new technology implementations • Coordinate with various departments and other staff on design projects • Generate and deliver reports to CEO • Travel to conferences and meetings related to ongoing and proposed projects • Offer troubleshooting assistance to other engineers and staff ????Required Qualifications: • Masters degree in aerospace engineering, mechanical engineering, physics, mathematics or related field may • 1-3 years of experience of entry-level positions • Advanced knowledge of aeronautical machines, including airplanes, rockets, spacecraft, helicopters, and UAVs • Intermediate to expert-level background using CAD software, such as Solidworks, AutoCAD, or ProEngineer • Proven experience working within different operating systems, including Windows, Linux, and MacOS • Strong attention to detail and the ability to quickly and easily assess problems • Ability to work collaboratively and seek assistance to solve problems ???? If you think you are the right person for this position, then let's try as soon as possible!! HOVER CITY focuses on Real Estate, Construction, Aerospace, and Mobility. Their company has offices in United States, France, and Italy. They have a small team that's between 1-10 employees.

A defense technology company is seeking an AI Engineer to work on transformer architectures and develop advanced AI systems. This role involves cross-functional collaboration and the need for expertise in machine learning algorithms. Candidates should have a BS in a related field and Python skills. The company offers a competitive salary range of $220,000 - $292,000, along with comprehensive benefits including healthcare, income protection, and generous PTO. #J-18808-Ljbffr