Mechanical design engineer jobs in Hartford, CT - 456 jobs

We are seeking a detail-oriented and technically skilled Technician or Junior Engineer to operate and support a cutting-edge robotic prototype. This role is critical to advancing technology that has the potential to greatly impact fulfillment. The ideal candidate will be independent, motivated, and comfortable working with evolving prototype systems. Responsibilities Operate and support a cutting-edge robotic prototype. Work with minimal oversight and take initiative in problem-solving. Capture data and log information in prescribed systems accurately. Work with command line interfaces and troubleshoot mechanical/electrical hardware. Coordinate with remote technical teams effectively. Essential Skills Basic understanding of mechanical, electrical, and robotic systems. Ability to read and interpret technical drawings, schematics, and manuals. Proficiency with hand tools, power tools, and measurement instruments. Experience with command line interfaces or willingness to learn quickly. Computer literacy including data entry and basic software applications. Strong attention to detail and commitment to quality. Excellent problem-solving and analytical thinking skills. Ability to follow written and verbal instructions precisely. Job Type & Location This is a Contract position based out of Charlton, MA. Pay and Benefits The pay range for this position is $38.00 - $40.20/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Charlton,MA. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Project Engineer - Paving Division Schedule: Full-Time Compensation: $85,000+ Salary (commensurate with experience) + Comprehensive Benefits Build What Matters. Accelerate Your Career. For more than 60 years, Waters Construction has delivered critical infrastructure that connects communities and supports long-term growth. We prioritize safety, welcome smart solutions, foster respect, maintain a positive outlook, and adapt to every challenge. Here, the work and culture speak for themselves. We are seeking a high-performing Project Engineer who wants more than a job-someone motivated to learn the business, take responsibility early, and grow into a leadership role within our Paving Division. The Opportunity As a Project Engineer at Waters Construction, you will play a key role in the execution of complex Connecticut DOT Pavement preservation projects across Connecticut. This position offers hands-on exposure to both field operations and project controls, providing a strong foundation for advancement into Project Management or Operations leadership. This role is ideal for a driven professional who: Takes initiative and asks the right questions Thrives in fast-paced, real-world problem solving Wants direct responsibility for schedule, cost, and performance outcomes Key Responsibilities: Manage daily project documentation, including logs, submittals, and reporting to keep work compliant and on schedule Track production, quantities, and costs, contributing to accurate weekly cost-to-revenue reporting Support project scheduling and resource planning, including labor, equipment, and materials Coordinate with field teams, subcontractors, DOT representatives, and project owners to ensure alignment and timely payment Review plans, specifications, and CT DOT requirements to support quality execution Spend time both in the field and the office, gaining a complete understanding of how successful projects are built What We're Looking For Technical & Professional Qualifications Bachelor's degree in Civil Engineering or related field (or equivalent experience) 3-5 years of experience in heavy civil or paving construction preferred Working knowledge of CT DOT specifications Ability to read and interpret construction plans and specifications Experience in Microsoft Project or Primavera scheduling software. Experience with Bluebeam, HCSS products, or similar construction software Core Attributes Strong organizational and analytical skills Clear, confident written and verbal communication High level of accountability and integrity Ability to work independently while contributing to a team environment Desire to learn, improve, and take on increasing responsibility Why Waters Construction We invest in people who invest in their work. At Waters, you'll find: Real responsibility early in your career Exposure to experienced leaders and complex projects A culture that values respect, trust, and continuous improvement Total Compensation & Benefits Include: Salary and bonus Comprehensive healthcare benefits 401(k) retirement plan Profit Sharing Vehicle reimbursement Life insurance Paid time off and parental leave Join Us If you thrive on responsibility, hold yourself to high standards, and are ready to move beyond task management to deliver real results, build influence, and grow into a leadership role, this opportunity is your next move Learn more: ******************* Waters Construction is an Equal Opportunity / Affirmative Action Employer.

Haugland Group, a privately-owned civil infrastructure and energy construction company has an immediate opportunity for a Civil Project Engineer in our Massachusetts territory. We are looking for an experienced, self-motivated, highly organized individual to join the Project Management team to provide all facets of construction project support, including submittal processing, material management, and budget analysis. At Haugland, we understand that pushing the boundaries of what has been done is essential to develop the infrastructure of tomorrow. The journey won't be simple, but what gets us there is. At Haugland Group, Our Word is Our Way. We are leaders in building what's next because we see the path to get there and we're setting a new standard of exceptional along the way. Let's build together! Key Functions Initiate, prepare, review, develop, track, and distribute submittals and RFIs through Procore. Track file documentation (e.g., correspondence, reports, etc.) in Procore daily to follow-up on and/or summarize project issues, agreements, communications with owners and subcontractors, etc. Reconcile paperwork with the Owner's Field Rep to ensure accurate and proper completion of timesheets. Engage the work crews in conversation on both the technical and safety aspects of the job. Confirm installation is in accordance with specification and/or manufacturers' recommendation. Conduct daily log entries. Ensure progress photos are taken, cut sheets, field drawing marked up, T&E sheets verified/signed (if any), and constructed field measurements are completed daily. Interface with Cost Engineer to track invoices and receipts for field purchase orders and maintain field purchase order files and documentation. Coordinate fabrication and delivery of materials with project CPM, Project Manager, and Superintendent. Interface with Cost Engineer to code and approve PO invoices, coordinating with Accounts Payable and Project Support team. Review and submit quantities to owner for approval. Assist the Project Manager in budget analysis and cost projections. Assist in management of all subcontractors. Gather and submit closeout documentation. Assist Project Manager with projections and costs to complete. Desired Qualifications 3+ years of relevant experience, preferably Civil Engineering. Bachelor's degree in civil engineering preferred. Proficient in the use of Microsoft Office and standard computer applications. Display a high level of initiative, effort, and commitment towards completing assignments in a timely manner. Ability to identify problems; determine accuracy and relevance of information; use sound judgment to generate and evaluate alternatives and make recommendations. Effective communication skills, interpersonal and organizational skills, and a strong work ethic. Why Haugland? Compensation range for this role is 100k-145k. At Haugland Group, our benefits are designed to convey company culture and values which has employees at its forefront. Excellent benefits package including medical, prescription drug, dental, vision, Health Savings, short/long term disability, and life insurance 401k with 5% employer match Employer funded Dependent Care FSA Potential for annual performance-based raise Paid Time off Paid company observed holidays Educational and professional advancement opportunities Frequent company-sponsored events Relaxed, friendly office Fast-paced, exciting environment Haugland Group LLC and its operating divisions, affiliates, related entities, and subsidiaries (collectively, “the Company”) do not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered property of the Company and therefore, the Company will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Only upon the Company's written request may preferred vendors may be invited to refer talent for specific open positions. In these cases, a fully executed agreement with the Company must be in place and current. We are an Equal Opportunity Employer. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to minimal penalties and civil liability.

Masis Professional Group has partnered with a Manufacturing company in Chicopee, MA and is seeking a Project Engineer. This role is onsite Mon-Fri - 1st Shift. Essential Duties and Requirements: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Assist with technical development of automotive and mobility products. This includes timing chain systems, selectable clutches, driveline disconnects, and park lock devices. Develop and support cost studies for VA/VE proposals. Responsible for developing system designs and component level designs for specific projects. Create and revise 3D models and 2D drawings utilizing Tsubaki CAD/design software. Responsible for coordinating engineering drawing approvals and releases, updating and releasing Bill of Materials, and supporting drawing implementation with cross-functional team. Responsible for communicating applicable engineering specifications (customer or internal) to team. Responsible for creating Design Gantt Charts, DFMEAs, and conducting Design Reviews (internal and supply chain). Develop and coordinate Design & Development Verification Plans, planning and implementation. Support the USTA Auto lab: issue Engineering Work Orders for tests and part exams, coordinate test parts, and issue customer reports. Coordinate with cross-functional APQP team on mass production launch. Support APQP objectives with cross-functional team such as: Process Flow Diagrams, Control Plans, and PFMEAs. Support Sales and New Product Groups on new business opportunities. Other tasks, functions and projects as assigned. Requirements Bachelor's Degree in Mechanical Engineering required. 3+ Years of experience in engineering or related career position. Working knowledge to GD&T required. Familiarity with automotive engines/transmissions, knowledge of AIAG standards and practices, and enthusiasm for the automotive industry preferred. CAD skills required. NX, CATIA, SolidWorks preferred. Familiarity with analysis and simulation software preferred. Ability to learn complex testing and instrumentation required. Ability to multi-task and prioritize work required. Excellent time management skills required. Excellent interpersonal skills required. Ability to effectively communicate verbally and in writing required. Ability to think critically and creatively in high stress situations. Willingness & ability to travel as necessary. 80Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Mostly in an office environment but occasionally in a factory environment with exposure to elements such as odor, noise, dust, heat, cold, or chemicals.

We are seeking Mechanical Design Engineers to support several engineering projects and programs. Successful applicants will be highly motivated, innovative, self-starters with strong mechanical, technical, and problem-solving skills, and will have earned a BS/MS/PhD in Mechanical Engineering or a closely related degree. We work on exciting, technically challenging, research & development programs where multidisciplinary teams work closely to address difficult national security needs. This position will allow applicants to collaborate with subject matter experts and make meaningful contributions to project teams and their objectives. It will give applicants exposure to all parts of the R&D process, from first-principle analysis through to prototyping and testing of integrated systems. This position will be responsible for supporting senior engineers with a variety of engineering tasks from design and development to assembly and testing of complex electromechanical systems. A solid working knowledge of CAD software (e.g. SolidWorks) is required as well as standard office software skills (e.g. Microsoft Office). A basic understanding of shop tools is desirable. A successful applicant will possess good technical, problem solving, and communication skills, and they will be mentored by a professional engineer. Tasking may include: • Design, analysis, and engineering of advanced prototype systems • Fabrication, assembly and laboratory testing of systems • Travel opportunities to help test equipment in the field Required Attributes and Skills: • Experience with 3D CAD Software • Fundamental knowledge of materials, strengths, and statics analysis • Utilization of mechanical engineering principals to design mechanical elements • Ability to perform preliminary FEA on mechanical designs • General knowledge of mechanical hardware and common systems (gears, shafts, fasteners, etc.) • Ability to read and create mechanical fabrication drawings • Proficient with Microsoft Office suite Desired Attributes and Skills: • Knowledge of engineering calculation tools (Mathcad, MATLAB, etc.) • Basic understanding of geometric dimensioning and tolerancing practices • Experience with 3D printing technologies and software • Experience with microcontrollers (i.e., Arduino, Basic Stamp, Raspberry Pi) • Knowledge of software programming languages (e.g. JAVA, C#, C++, Python) Required Qualifications BS/MS/PhD in Mechanical Engineering or a closely related degree.

Mechanical Engineering Intern At Salas O'Brien we tell our clients that we're engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career-and they'll receive great total rewards along the way. About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Job Summary: Here at Salas O'Brien Inc., you will obtain invaluable hands-on technical experience that you cannot learn in a classroom. Our engineers will help you to apply your textbook knowledge and create solutions for real engineering challenges. You will gain practical experience by working with experienced engineering and technical professionals and participating in challenging engineering projects. In this role: In this role you will have the opportunity work with engineer mentors in the design team and take ownership of portions of various projects. You will also work in coordination with other engineering disciplines and learn how a complete design package is developed. Work tasks will vary and require flexibility and desire for diversity in the engineering field. You will acquire time management, communication, and CAD drafting skills, as well as have the chance to apply engineering concepts. You will be a great fit if: You are currently enrolled in a Mechanical Engineering program at a four-year ABET university or college with preferred targeted graduation date within 1 year (preferred). Will consider interns who are graduating within 2 years, depending on our needs. Excellent written and verbal communication skills. You have experience with Microsoft Office programs (including Word, Excel, and Outlook) You are well organized and can effectively manage work and academic responsibilities simultaneously. Equal Opportunity Employment Statement Salas O'Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.

**Creating Peace of Mind by Pioneering Safety and Security** _At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world._ **Summer Intern, Mechanical Engineer; Farmington, CT** As an Allegion Summer Mechanical Engineer intern, you will contribute meaningful work and make a direct impact to the Mechanical Engineering team. You will gain valuable experience in defining and scoping requirements for mechanical designs and have the ability to contribute meaningful work to the Access Technologies team. Additional opportunities include learning automatic door systems, access control solutions, and will be an active contributor to the Mechanical Engineering team. If you are seeking a summer experience that offers meaningful work, learning opportunities, professional development and an opportunity to build strong relationships with your peers and leaders, Allegion is the right place for you! **What You Will Do:** - Modify layouts and details for existing door products or accessories - Innovate upon VAVE and Sustaining projects to iterate existing product designs - Verify tolerance fits and interferences using tools such as Creo Parametric and CeTol software - Propose, select, and specify materials to be used for new designs - Develop and create test plans for design verification and validation - Execute laboratory testing to support product design - Document standard operating procedures and relevant training information for departmental growth - Deepen and enhance mechanical design skills while working in an inclusive environment - Obtain the experience to create a foundation for growth and future opportunities with Allegion **What You Need to Succeed:** - Pursuing a degree in a relevant discipline, e.g. Mechanical Engineering and Mechanical Engineering Technology. - Demonstrated leadership ability and initiative, e.g. school club officer, sports team captain, resident advisor, leadership on school or work projects, etc. - At least one class in machine design or 3D modeling software proficiency. - Basic electro-mechanical understanding. - Passion to be hands-on and able to work in an Engineering laboratory environment. - Ability to work in both a team and individual setting. - Resiliency and ability to adapt quickly. - Effective listening, time management and creative problem-solving techniques - A desire to learn, grow and develop by working on projects that will impact Allegion's business and customers **Why Work for Us?** **Allegion is a Great Place to Grow your Career if:** + You're seeking a rewarding opportunity that allows you to truly help others. With thousands of employees and customers around the world, there's plenty of room to make an impact. As our values state, "this is your business, run with it". + You're looking for a company that will invest in your professional development. As we grow, we want you to grow with us. + You want a culture that promotes work-life balance. Our employees enjoy generous paid time off, because at Allegion we recognize that you have a full life outside of work! + You want to work for an award-winning company that invests in its people. Allegion is proud to be a recipient of the **Gallup Exceptional Workplace Award** for the second year in a row, recognizing our commitment to employee engagement, strengths-based development, and unlocking human potential. **What** **You'll** **Get from Us:** + An opportunity to be a part of a dedicated team that collaborates on real, hands-on projects + Professional Growth through exposure to Allegion's leaders, professional development and skill building opportunities, and mentor/mentee relationships + Meaningful time to network and get to know your peers through Allegion sponsored activities hosted by the Talent Attraction Team + Opportunities to leverage your unique strengths through Clifton Strengths testing and coaching **Compensation:** This range is provided by Allegion. Your actual pay will be based on your skills and experience. + The expected Base Hourly Range: $25-$26/hour. The actual compensation will be determined based on experience and other factors permitted by law. Join our team of experts today and help us make tomorrow's world a safer place! _Not sure if your experience perfectly aligns with the role? Studies have shown that some people are less likely to apply to jobs unless they meet every single qualification and every single preferred qualification of a job posting. At Allegion, we are dedicated to building a diverse, inclusive, and authentic workplace. So, if_ _you're_ _excited about this role but your_ _past experience_ _doesn't_ _align perfectly with every item in the job description, we encourage you to apply anyway. You may be just the right candidate for this role._ \#ALLEGION **We Celebrate Who We Are!** Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team (********************) . © Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer (**************************************************************** Privacy Policy **We are Allegion.** A team of experts. United under a common desire; Protect today innovate for tomorrow. And never settle for the status quo. We believe in anticipating opportunities by sharpening our skills and finding new answers through collaboration. We believe in a safer, more secure world. We believe in providing peace of mind. We believe in being true to ourselves and to those who trust-in our protection. We are many. We are one. **We are Allegion.**

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Summer Intern, Mechanical Engineer; Farmington, CT As an Allegion Summer Mechanical Engineer intern, you will contribute meaningful work and make a direct impact to the Mechanical Engineering team. You will gain valuable experience in defining and scoping requirements for mechanical designs and have the ability to contribute meaningful work to the Access Technologies team. Additional opportunities include learning automatic door systems, access control solutions, and will be an active contributor to the Mechanical Engineering team. If you are seeking a summer experience that offers meaningful work, learning opportunities, professional development and an opportunity to build strong relationships with your peers and leaders, Allegion is the right place for you! What You Will Do: * Modify layouts and details for existing door products or accessories * Innovate upon VAVE and Sustaining projects to iterate existing product designs * Verify tolerance fits and interferences using tools such as Creo Parametric and CeTol software * Propose, select, and specify materials to be used for new designs * Develop and create test plans for design verification and validation * Execute laboratory testing to support product design * Document standard operating procedures and relevant training information for departmental growth * Deepen and enhance mechanical design skills while working in an inclusive environment * Obtain the experience to create a foundation for growth and future opportunities with Allegion What You Need to Succeed: * Pursuing a degree in a relevant discipline, e.g. Mechanical Engineering and Mechanical Engineering Technology. * Demonstrated leadership ability and initiative, e.g. school club officer, sports team captain, resident advisor, leadership on school or work projects, etc. * At least one class in machine design or 3D modeling software proficiency. * Basic electro-mechanical understanding. * Passion to be hands-on and able to work in an Engineering laboratory environment. * Ability to work in both a team and individual setting. * Resiliency and ability to adapt quickly. * Effective listening, time management and creative problem-solving techniques * A desire to learn, grow and develop by working on projects that will impact Allegion's business and customers Why Work for Us? Allegion is a Great Place to Grow your Career if: * You're seeking a rewarding opportunity that allows you to truly help others. With thousands of employees and customers around the world, there's plenty of room to make an impact. As our values state, "this is your business, run with it". * You're looking for a company that will invest in your professional development. As we grow, we want you to grow with us. * You want a culture that promotes work-life balance. Our employees enjoy generous paid time off, because at Allegion we recognize that you have a full life outside of work! * You want to work for an award-winning company that invests in its people. Allegion is proud to be a recipient of the Gallup Exceptional Workplace Award for the second year in a row, recognizing our commitment to employee engagement, strengths-based development, and unlocking human potential. What You'll Get from Us: * An opportunity to be a part of a dedicated team that collaborates on real, hands-on projects * Professional Growth through exposure to Allegion's leaders, professional development and skill building opportunities, and mentor/mentee relationships * Meaningful time to network and get to know your peers through Allegion sponsored activities hosted by the Talent Attraction Team * Opportunities to leverage your unique strengths through Clifton Strengths testing and coaching Compensation: This range is provided by Allegion. Your actual pay will be based on your skills and experience. * The expected Base Hourly Range: $25-$26/hour. The actual compensation will be determined based on experience and other factors permitted by law. Join our team of experts today and help us make tomorrow's world a safer place! Not sure if your experience perfectly aligns with the role? Studies have shown that some people are less likely to apply to jobs unless they meet every single qualification and every single preferred qualification of a job posting. At Allegion, we are dedicated to building a diverse, inclusive, and authentic workplace. So, if you're excited about this role but your past experience doesn't align perfectly with every item in the job description, we encourage you to apply anyway. You may be just the right candidate for this role. #ALLEGION We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs, and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. *********************** In addition, MACOM offers foundry services that represents a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Mechanical Engineering, Principal Job Description: Support new package design and development by working with a team of engineers and designers. Responsible for all mechanical aspects of new and legacy designs. Devices range from single chip packages to subsystem modules. Key aspects of the role include: * Ownership of the compliance of designs to meet mechanical requirements * Interaction with customers and ability to negotiate requirements where conflicts may occur * Interaction with internal design engineers, project managers, assembly and test entities to ensure all aspects of the design are in-line with expectations across the company * Mechanical analyses including but not limited to structural, thermal and reliability * Ownership and design of assembly and test fixtures * Understanding of machining best practice and GD&T tolerancing * Ability to work with vendors to understand their capabilities in aligning part designs with industry capabilities * Understanding of various manufacturing techniques including subtractive metal fabrication, additive manufacturing, etching, laser cutting, welding and marking, etc. * Ability to work in fast paced environment with small and large teams with little-to-no supervision Qualifications: Mechanical Engineering Degree or similar with 8+ years of experience in an electronics packaging role. Experience with IC packaging, system and subsystem mechanical design and analysis. The ideal candidate will have experience with RF and millimeter wave types of products. Key capabilities of an ideal candidate are: * Experience with packaging for RF-Power applications, using eutectic and/or sintered epoxy die attach * Experience with aluminum, copper and other alloys for use in packaging and thermal transfer * Understanding and awareness of coefficient of thermal expansion (CTE) matching between various mediums * Understanding of metal plating standards and requirements * Experience in reliability, failure analysis, and quality assurance in advanced package and process development * Experience designing for manufacturing, both internally and externally, both piece-part and assemblies * Knowledge of product characterization, testing, quality and reliability, including compliance testing and certification is a plus [MIL-PRF-38534, JEDEC, IPC, etc.] * Intimate knowledge of structural analysis using 3D CAD tools as well as first principles * Intimate knowledge of thermal analysis using 3D CAD tools as well as first principles * Demonstrated ability to lead independent process development * Ability to provide suppliers direction by working with design, assembly, and quality organizations * Familiar with finite element analyses (FEA) required and computational fluid dynamics (CFD) desired * Familiar solving steady state and dynamic thermal problems * Experience using: Solidworks, AutoCad, and PCB layout viewers is ideal * Strong problem solving skills along with good communication, team work, and interpersonal skills * Experience in critical thinking and presentation skills * Experience with supplier and program management roles * Experience working in complex teams to understand and balance all aspects of a design to meet desired outcomes * Ability to balance and prioritize multiple programs and needs simultaneously * Fluent communicator in the English language Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. The Salary Range for this position is $97,902- $166,698 per hour. Actual salary offered to candidates will depend on several factors, including but not limited to, work location, relevant candidates' experience, education, and specific knowledge, skills, and abilities. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs. Benefits: This position offers a comprehensive benefits package including but not limited to: * Health, dental, and vision insurance. * Employer-sponsored 401(k) plan. * Paid time off. * Professional development opportunities.

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Mechanical Engineering Intern 2026Summer Intern Program Location: Hamden, CT Amphenol Spectra-Strip is enabling the electronics revolution with wire and cable solutions. We are the market leader for products that power the internet, cloud compute and artificial intelligence. We make components that run at 224Gbps per lane and can download 100 full length HD movies in a single second. Amphenol is a great place with outstanding engineers working on the fastest signals, with all the software and equipment needed to be successful. We are currently seeking a Product Development Engineer to join our team to lead product innovation in design, validation, and launch phases. RESPONSIBILITIES: This role supports our Mechanical Engineering group. You will work closely with internal engineers and manufacturing personnel, supporting the development and validation of product prototypes through polit production. This position also works within the production area, creating and testing designs. What you'll do: Gain Experience! Support the product design effort through analysis, testing, and deployment Generating detailed technical drawings Gather test data to support R&D activities Support production with fixture designs Identify process deficiencies and help develop solutions to improve those deficiencies QUALIFICATIONS: A good candidate should be at least a sophomore in a Mechanical Engineering program Experience with solid modeling tools (SolidWorks) Ability to communicate with technical & non-technical people Ability to work in team environment Amphenol Corporation is proud of our reputation as an excellent employer. Our main focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at ****************************

Job Title Business Unit Department Reports To Product Design Engineer Chore-Time Engineering Engineering Manager BU Location BU Acceptance Approved By: Date Approved Milford, IN Overall Purpose: Why the Job Exists & What You Will Do: As the Product Design Engineer, you will design, develop, and create innovative poultry components and equipment to meet customer expectations and business goals. Essential Job Functions & Expected Outcomes: Your Accountabilities in the Role Product Design & Development: 100% of the Job Communicates and collaborates with customers, dealers, and network to establish product needs within the industry, as well as research competitive product lines, to create new or enhanced products that will drive business goals. Manages the design, layout, specifications, and testing of new or enhanced products, work with sheet metal and plastics, work with internal and external manufacturing to ensure the quality, timing, resources, and costs meet the overall expected results of the project. Leads, collaborates, and communicates with project team members to direct the detailed product design and implementation, ensuring a best practice approach for optimal implementation results. Travels to assist with product installments, meetings, and trade shows through the U.S. and Internationally to ensure the Voice of the Customer is integrated in every part of the processes. The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any item with or without notice. Position Requirements: Education: Bachelor's Degree in Mechanical or Agricultural Engineering, or a related field; will also consider an equivalent combination of education and experience. Experience: 2+ years of experience with plastic part design, ventilation, fluid mechanics, or product design within an agricultural or farming environment preferred; will consider an entry level person with strong aptitude for the role preferably with related experience/understanding of poultry husbandry and housing. Certification(s): N/A Functional Skills: Strong foundational understanding of engineering and mechanical principles to design parts that include motors, mechanical power components, sheet metal parts, injection mold and extruded plastic parts, material flow, air movement/cooling systems, and movement of material (i.e. feed, eggs, and waste). The position requires strong analytical, problem-solving, conceptual, project management, time management, and organizational skills to take ideas, design a product, and execute to meet market needs. A familiarity with CE European product standards would be a plus. Technology Aptitude/Skills: Strong skill set in AutoCAD/3D CAD programming (Inventor/Vault); ERP system experience is a plus (Oracle preferred); Advanced Microsoft Office Skills (Word, Excel, Teams) required as well. Language Skills: Excellent verbal and written communication skills; will present ideas and outlines to management team, vendors, and customers. Leadership/Behaviors: Ability to work with an experienced team, who is collaborative and supportive. Can learn quickly to move past barriers and be a strong influencer to get things done to own the role. Culture Match: Excellent abstract thinking; creative, conceptual thinker with a solid common-sense approach to create solutions and push through obstacles. High integrity, Dependability, who can handle confidential information well. Will also be Customer-Focused, Cost Conscious, Strives for Excellence, and can thrive in a fast-paced environment. Will also be able to visit farms and interact with customers in a professional, well-received way. Core Values that Apply to All Positions: Integrity in all things Customers are why we exist Profitability is a must Excellence in all we do People make the difference Equipment Used: This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and similar machines. This role will often use laboratory testing equipment, measuring instruments, waterjet, 3d printer, and other mechanical equipment to produce prototype and/or test equipment. Physical Requirements to Perform Essential Functions: Ability to operate a motor vehicle as needed for travel in the role Ability to sit at desk for 5+ hours per day Ability to operate keyboard and view computer screen for majority of day 6-7 hours Ability to write ideas/information in a logical flow for 5+ hours per day Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day Ability to read, write and speak English fluently Ability to communicate with others via phone, in-person, and computer on-going Ability to listen to customers, problem-solve, and respond accordingly Ability to sit, stand, bend, reach, kneel, squat, twist, push, pull, walk, stoop, crouch, and carry items frequently Lifting up to 15 lbs. sporadically Environmental Conditions & Travel: The employee is primarily exposed to a normal office environment with moderate noise. The employee is occasionally required to wear suitable Personal Protective Equipment while visiting manufacturing departments and client locations. Testing and engineering lab environment with machines and equipment related to prototyping and testing. This position may be occasionally exposed to animals, dust, and dirt when visiting client locations. This position may face inclement weather conditions when traveling. Travel: 10 - 20% travel is required (Domestic & International) I have reviewed and understand the above . I understand that the company may change this as it deems necessary and at its discretion. I also understand that a copy of this job description is available to me through request to my manager or Human Resources department. Employee Name (Print) Employee Signature Date

See it differently You see the world through a unique lens and that's exactly what we need. We embrace how you see things differently - it's essential for creating a sustainable future. Arup is a global consultancy with advisory and technical expertise across more than 150 disciplines. We guide, plan and design the future of the built environment. Globally, each year we recruit hundreds of interns to help us see things differently and solve the most complex challenges facing our clients, climate and communities. The Opportunity * Design of Heating, Ventilation and Air Conditioning (HVAC) services within the built environment, with an emphasis on sustainable design * Collaborate with clients, architects, engineers, and consultants to develop integrated solutions for complex buildings * Perform engineering analysis and modelling, including whole building load calculations and energy analysis, facade thermal analysis, and airflow modelling * Document system design in Revit MEP * Communicate technical ideas to a broad range of audiences using various formats, including presentations and workshops * Write reports documenting calculation methods and results, design assumptions, and other technical information * The ability to prioritize effectively, balance assigned work and exceptional organization skills required for our constantly evolving environment * Influence with design on sustainable outcome for our clients to align with Arup sustainability commitment Is this role right for you? Required * Pursuing a Bachelor's Degree in Mechanical, Architectural Engineering, or Building Sciences related degree * Coursework in heat transfer and thermodynamics, fluid dynamics or HVAC design * Developing interest in the built environment * Proven leadership experience and time management skills * Ability to communicate thoughts and technical ideas in an accessible way * Attitude of taking initiative, enthusiasm, eagerness to learn, teamwork, creativity * Strong interpersonal and communication skills essential for team-based working * Presentation skills with colleagues and clients of all levels * Must be eligible to work in the United States without the need for employer sponsored work authorization now or in the future. Preferred * Pursuing a Master's Degree in Mechanical, Architectural Engineering, or Building Sciences related degree * Passed Fundamentals of Engineering examination * Membership in ASHRAE, USGBC, ASME * Coursework in Energy/thermal modeling experience, Revit or 3D modeling experience and/or sustainability * Advanced computational modeling (e.g., CFD) * Computer programming languages (e.g., Dynamo, Python, Grasshopper) We're looking for: * Changemakers: A passion for sustainable development and creating a better world is key. * Innovative minds: We're looking for critical thinkers who embrace new ideas and challenge the status quo. * Growth seekers: You have a growth mindset, always eager to learn and explore new ways of working. * Adaptable adventurers: You're ready to take on any challenge that comes your way. What we offer you At Arup, we care about each member's success, so we can grow together. Our intern experience offers you: * Purpose-driven work: Join an employee-owned team tackling climate, biodiversity, and social challenges, aligned with the UN's Sustainable Development Goals. * Create remarkable outcomes: We trust you to explore challenges, drive change, and create lasting outcomes for our clients, climate and communities. * Inclusive culture: Your unique perspective matters. We celebrate diversity and foster a supportive, social environment where everyone belongs. * Career growth: Grow your skills through innovative projects, training, and mentoring in a supportive environment. We invest in your future. * Work-life balance: Our hybrid model offers flexibility to balance work with your life. We balance your needs with our clients and communities Washington DC Hiring Range - The good faith base salary hiring range for this job if performed in Washington DC is $24.00 to $43.50 per hour. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Washington DC will differ. Next Steps We will be reviewing our candidates for this position on a rolling basis. Once you've submitted your application, we'll invite you to showcase your skills through a pre-recorded video interview if you've met the minimum requirements. After reviewing your submission, a member of our team will get in touch with you to discuss the next steps. Arup is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. Stay safe online. Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. Different people, shared values Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at *************************************** #goarup #LI-DF1

ARKA Group L.P. (“ARKA”) is an advanced technologies company serving the U.S. military, intelligence community, and commercial space industry delivering next-generation solutions to support the national security space enterprise. Built on more than six decades of excellence, ARKA brings modern approaches and a culture of innovation to the challenges of today. Join the ARKA team to learn how Beyond Begins Here. Discover your next career opportunity now! Position Overview: Our Student Program provides amazing opportunities to develop functional job skills and gain real-world experience and expertise. We offer spring, fall and year-round internships and co-ops in fields across the company, including engineering, finance, and business development. We are currently seeking a student enrolled in Henry Abbot Technical School in the Mechanical Design and Engineering Technology program to join our Engineering department as a Year-round Intern. Responsibilities: This position requires an entry level designer/drafter to apply technical skills for moderate complexity interdisciplinary tasks. You will be responsible for producing tooling and related flight hardware within an integrated product team It is expected you will work autonomously with moderate oversight and be accountable for both space flight and non-space flight development program milestone deliverables Basic Qualifications: Enrollment in Henry Abbot Technical School in the Mechanical Design and Engineering Technology program Create part models, assembly layouts, detailed drawings, and bills of materials using CREO for solid modeling and PDMLink for data management Execute engineering design changes for part and assembly drawings Interact and coordinate with all engineering disciplines to deliver comprehensive design, engineering, and specification packages Preferred Qualifications: General understanding of GD&T Location: Danbury, CT This position is based onsite at our facility in Danbury, CT. Located in beautiful Fairfield County, Danbury offers a diverse economy, wonderful parks, cultural attractions, an impressive mix of private and public educational institutions and a vibrant arts scene. Our facility is nestled among a remarkable selection of communities to call home all with varying price points to fit many different budgets. We're close to New York City, Boston, and other major cities - great for day trips and weekend getaways. Our lovely seasons along with award-winning institutions, colleges, cultural events, and a genuine sense of community brings a diverse population to the beautiful state of Connecticut! When you choose to join the ARKA Student Program, you will: Gain hands-on experience in your chosen field and share your unique ideas and creative problem-solving skills to help us continue our legacy of innovation Flourish and seamlessly develop great relationships with co-workers Network with students from other universities Participate in activities that support our local communities Work alongside our talented team, including employees who started as interns or co-ops Enjoy companywide employee activities Receive competitive compensation and paid holidays EHS/Environmental Requirements: This job operates in a professional office environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of the time. This would require the ability to move around the campus and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. To apply, send a request to ***************** or contact ************ and press 2 for Human Resources. ITC & Security Clearance Requirements: This position requires the incumbent to access export-controlled information. If you are not a U.S. Person, any offer is contingent upon the Company's ability to obtain a special license granting you access. This could take several months. You will not be able to begin employment until such license is obtained. Visa Restrictions: No visa sponsorship is available for this position. Pre-employment Screenings: Employment with any ARKA companies in the U.S. is contingent upon satisfactory completion of several pre-employment requirements to include a credit check, background check, and drug screen.

Job Description RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $8.9 billion. JOB TITLE/LOCATION: Applications/Design Engineer ~ Oxford, CT DESCRIPTION: The RBC Division is in search of an Application / Design Engineer to be located in our corporate office in Oxford, CT. The successful candidate will be responsible for both design and application of spherical plain bearings reporting to the SPB Product Engineering Manager. ESSENTIAL FUNCTIONS OF THE JOB: Work directly with RBC customers to satisfy their application needs. Support our external sales and business management personnel by making visits to customers to promote RBC's capabilities. Convert customer requirements into bearing designs. Derive application loading, cycles, and other operating conditions relevant to the bearing application. Based on these inputs, select or alter existing bearing designs to meet customer requirements. Develop new bearing designs as needed Participate in DFMEA, PFMEA events related to product / design application When needed, develop bearing testing requirements for validation of a proposed design. Work closely with test engineers in conducting validation testing Develop manufacturing, grinding, and assembly drawings using SolidWorks. Understand heat treatment specifications as they relate to the bearing designs. Work directly with our manufacturing plants to ensure the proper production of the product designed. Work with the manufacturing division personnel to develop methods of bearing inspection. Other duties as assigned. EDUCATION: Bachelor's degree in Engineering required, Mechanical Design preferred. EXPERIENCE: 3-10 years as Mechanical Engineer or related experience. Bearing experience is preferred. Strong mechanical aptitude SKILLS / CERTIFICATIONS: Bachelor's Degree in an engineering field. Mechanical Engineering preferred. US citizenship is required. Strong mechanical aptitude. Excellent communication skills, capability to interact with customers. 3D Modeling experience in SolidWorks (or equivalent) is desired. Proficiency with Microsoft Office Programs. Travel Approximately 25% We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. Interested candidates may send resumes to: ************************** RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $8.9 billion. JOB TITLE/LOCATION: Applications/Design Engineer ~ Oxford, CT DESCRIPTION: The RBC Division is in search of an Application / Design Engineer to be located in our corporate office in Oxford, CT. The successful candidate will be responsible for both design and application of spherical plain bearings reporting to the SPB Product Engineering Manager. ESSENTIAL FUNCTIONS OF THE JOB: Work directly with RBC customers to satisfy their application needs. Support our external sales and business management personnel by making visits to customers to promote RBC's capabilities. Convert customer requirements into bearing designs. Derive application loading, cycles, and other operating conditions relevant to the bearing application. Based on these inputs, select or alter existing bearing designs to meet customer requirements. Develop new bearing designs as needed Participate in DFMEA, PFMEA events related to product / design application When needed, develop bearing testing requirements for validation of a proposed design. Work closely with test engineers in conducting validation testing Develop manufacturing, grinding, and assembly drawings using SolidWorks. Understand heat treatment specifications as they relate to the bearing designs. Work directly with our manufacturing plants to ensure the proper production of the product designed. Work with the manufacturing division personnel to develop methods of bearing inspection. Other duties as assigned. EDUCATION: Bachelor's degree in Engineering required, Mechanical Design preferred. EXPERIENCE: 3-10 years as Mechanical Engineer or related experience. Bearing experience is preferred. Strong mechanical aptitude SKILLS / CERTIFICATIONS: Bachelor's Degree in an engineering field. Mechanical Engineering preferred. US citizenship is required. Strong mechanical aptitude. Excellent communication skills, capability to interact with customers. 3D Modeling experience in SolidWorks (or equivalent) is desired. Proficiency with Microsoft Office Programs. Travel Approximately 25% We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. Interested candidates may send resumes to: ************************** RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

Insight Global is seeking a Mechanical Systems Engineer for a large maritime manufacturing company based out of New London, CT. The ideal candidate will have 15+ years of mechanical engineering experience with a focus in applying engineering principles in rotating machinery parts. This person will serve as the technical authority for rotating mechanical systems critical to submarine operation for the Main Propulsion Motor in COLUMBIA Class production. The engineer ensures that components such as bearings, shafts, seals, pumps, motors, and propulsion machinery are reliable, safe, and properly integrated into the submarine platform. Acting as a Subject Matter Expert (SME), this individual bridges design and production, supports integration, and leads troubleshooting throughout the build, test, and sustainment phases. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - Bachelors degree in Mechanical Engineering - 15 years of relevant engineering experience - Strong troubleshooting experience and root cause analysis - Active secret clearance or ability to hold a DoD secret clearance - Experience with submarine mechanical systems, propulsion machinery, or rotating equipment - Knowledge of GD&T and technical drawing interpretation - Familiarity with test procedure development and component integration to ship structures - Operations/construction support experience - Strong communication and interpersonal skills

DIRECT HIRE: An amazing opportunity for an experienced Aerospace Engineer to join a dynamic team in the Manchester, CT. area. The successful candidate must have a CNC Machinist background. This isn't a desk-only role. This position bridges design and manufacturing, develops machining processes. The candidate will write and optimize CNC programs. Also work hands-on with machinists to deliver aerospace-grade precision. Salary: $120K - $130K (Based on Experience) Schedule: Monday - Friday, 8AM - 5PM (flexible) Benefits: Medical, dental, vision, 401K, PTO, holidays Role & Responsibilities: Develop and improve CNC processes for aerospace components Program, set up, and optimize multi-axis mills and lathes Support design reviews and ensure manufacturability of complex parts Collaborate with production and quality teams to meet AS9100D / NADCAP standards Lead continuous improvement for tooling, setup time, and cycle efficiency Skills & Experience: Proven CNC machining expertise - you've run the machines yourself Strong aerospace or precision manufacturing background Working knowledge of GD&T, CAD/CAM, and process documentation Ability to solve problems on the shop floor and communicate across teams Engineering degree preferred but not required - hands-on skill is a must Must possess a minimum 10 years' CNC Machinist experience Once you apply, please text "AE" to ************ for a faster reply. INDH

Company Bio X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities. Position Overview X-Ray Industries, an Applus+ company, is a well-established non-destructive testing service provider in the aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest and most established NDT provider, offering a broad range of testing and inspection capabilities. We are seeking NDT Technicians of all certification levels to join our growing team. Technicians must be certified to NAS-410. Other certification standards may be considered upon review of certification records. A successful candidate in this role is familiar with the scope and limitations of their test method and is capable of performing testing, calibration, interpretation, evaluation, and documentation appropriate to their certification level. They are team-oriented and have a strong passion for nondestructive testing. Benefits Offered: • Medical, dental, and vision offered • Company provided short term and long term disability and life insurance benefits • 401k match • Vacation available • First, second, and third shifts available based on facility need • All training provided in house! • No travel involved • Indoor work environment Aerospace Structural Testing at Applus+ Laboratories - YouTube Website: ********************************************* *Documentation of high school diploma or GED is required. Education and Work Experience • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. • High School Diploma or GED required. Documentation is required. Certificates and Licenses Required • State ID required We can recommend jobs specifically for you! Click here to get started.

We are seeking a detail-oriented and technically skilled Technician or Junior Engineer to operate and support a cutting-edge robotic prototype. This role is critical to advancing technology that has the potential to greatly impact fulfillment. The ideal candidate will be independent, motivated, and comfortable working with evolving prototype systems. Responsibilities + Operate and support a cutting-edge robotic prototype. + Work with minimal oversight and take initiative in problem-solving. + Capture data and log information in prescribed systems accurately. + Work with command line interfaces and troubleshoot mechanical/electrical hardware. + Coordinate with remote technical teams effectively. Essential Skills + Basic understanding of mechanical, electrical, and robotic systems. + Ability to read and interpret technical drawings, schematics, and manuals. + Proficiency with hand tools, power tools, and measurement instruments. + Experience with command line interfaces or willingness to learn quickly. + Computer literacy including data entry and basic software applications. + Strong attention to detail and commitment to quality. + Excellent problem-solving and analytical thinking skills. + Ability to follow written and verbal instructions precisely. Job Type & Location This is a Contract position based out of Charlton, MA. Pay and Benefits The pay range for this position is $38.00 - $40.20/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Charlton,MA. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.