Mechanical design engineer full time jobs - 72 jobs

Job DescriptionDescriptionWe are an Ohio based mechanical and electrical consulting engineering firm with offices in North Royalton and Columbus established in 1993. We are seeking a full-time mechanical engineer or mechanical designer with at least 3 years of experience to support the growth and expansion of our business. The position would start as a "mechanical engineer/designer" and potentially progress over time to "project manager” or “project engineer." Key ResponsibilitiesPosition will involve HVAC and Plumbing system design, design computations including loads, air and piping distribution and sizing, equipment selection, specification preparation, field work (both design investigation and construction observation), design review and correspondence with clients, colleagues, owners, and contractors. • Preparation of design layouts for commercial and industrial mechanical systems based on specific design objectives. • Preparation of schematics for various systems. • Collaboration with all disciplines to achieve completed coordinated design and reviewing the work of others. • Performance of on-site investigation to confirm existing conditions. • Developing familiarity with current mechanical codes and standards. • Forming relationships with equal level personnel of other disciplines (architectural, electrical, structural civil, etc.) and manufacturing sales representatives. • Becoming familiar with and preparing general and mechanical specifications. Skills, Knowledge and Expertise• Must have consultative mechanical engineering experience. Interpersonal skills to work effectively with others. • Familiarity with system specific materials, components, and systems. • Basic knowledge of high mathematics relative to the work. • Oral and written communications skills. • Analytical ability to solve complex problems. • Working ability/knowledge of AutoCad. • Working ability/knowledge of REVIT is not required, but desired. Benefits We operate an open and collaborative space that allows for an environment where ideas are freely exchanged, solutions are created, and proposals become reality. Even though the pace is fast, we do what we can to maintain a respectful, cooperative spirit throughout the office that considers schedules, work habits, personal priorities, and “space”. Additional benefits include the following: • 401(k) with Safe Harbor contribution of 3% of salary • Full coverage of Health insurance in Medical Mutual SuperMed PPO Network • Paid time off including vacations and holidays.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), **onsite** position with a competitive hourly pay rate and eligible for overtime pay. **This position will start May 2026 and go through Summer. Dates are flexible with school calendar.** Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Produce detailed layout and equipment details of HVAC systems, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements** : + Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), + Strong interest in Building Systems Mechanical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start May 2026 and go through Summer. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Produce detailed layout and equipment details of HVAC systems, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), Strong interest in Building Systems Mechanical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. #LI-RH1 #LI-Onsite

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is currently searching for a Mechanical Designer, with a minimum of 4 years of experience, to join our Building Design Services team in the Columbus, OH office. Designer will be working in a team environment to develop water / wastewater related projects. Our growing team has a lot of exciting projects on the horizon which will create an excellent opportunity for motivated designer to elevate their knowledge and advance into the group. Designer will primarily focus on 3D modeling of HVAC, Plumbing, and Fire Protection while assisting with development of design drawings, providing support during project planning, working alongside project team during design, and engaging QA/QC reviews. Role accountabilities: Mechanical Designer will assist in developing conceptual layouts at the start of the project as well as create and maintain mechanical 3D Revit models for each project. The Designer will also create, monitor, and/or review preliminary and detailed design drawings and assist in the development of conceptual cost opinions (i.e. quantity take-offs) and possibly other engineering related. Additional duties include: Work effectively in team situations while establishing and maintaining strong relationships with other teams where overlap of client project work exists. Work directly with a variety of engineering disciplines, office / project staff and sub-contractors, throughout the project life cycle, and therefore should have clear and concise, oral and written communication skills with a demonstrated ability to work effectively with others in the preparation of design documents, participation in team meetings and field interaction with clients and subcontractors. Assist with development and management of personal workload and coordination with team workload and project budgeting. Ensure project compliance with all Arcadis practices and quality and safety standards and facilitate coordination for timely completion and submission of projects on time and within budget. Required Qualifications 4 years of experience with mechanical drafting/modeling for buildings or water/wastewater treatment design and construction projects. Proficient at using of AutoCAD, Revit and 3D modeling. Preferred Qualifications Professional work experience in similar role with a Consulting Engineering firm. Experience with BIM (Building Information Modeling) software and both 2D & 3D drafting. Experience with x'refing, layering, preparing quantity takeoffs and estimates. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $68,000 - $112,000. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RT4 #Resilience-NA #Water-NA #WaterJobsOhio

Korda/Nemeth Engineering, Inc. is seeking a Survey CAD/Right of Way Plan Designer for an immediate opening. If you are interested in working on a team that provides varied and complex engineering and surveying services, this opportunity is worth pursuing. Our projects and environment foster individual creativity, collaborative interaction, and teamwork. Founded in 1964, Korda/Nemeth Engineering, Inc. is a multi-disciplinary, nationally recognized consulting engineering firm providing civil, surveying, transportation, electrical, mechanical, structural, and technology engineering services. Our integrated engineering approach and experience make Korda/Nemeth Engineering the consulting engineering firm of choice for a variety of project types including Healthcare, Sports and Recreation, Science and Technology, Higher Education, High-Rise Buildings, Public Agencies involving Transportation, Bridge, Public Works, and more. (Please visit *************** We are seeking a Survey CAD/Right of Way (ROW) Plan Designer to join our team. The ideal candidate will have a solid background in land surveying with an understanding of civil engineering design and ROW acquisition procedures. These responsibilities involve the preparation of accurate and detailed ROW plans, and legal descriptions for projects involving highways, roadways, and utilities. In addition, survey mapping for a variety of boundary, topographic, utility, and site development projects. To be successful in this position, you must possess: Excellent time management and communication skills Attention to detail Ability to work on multiple projects in a collaborative environment Good social skills, as you represent our company at client meetings Willingness to learn new skills and to work towards continuous improvement Willingness to work additional time as required to meet project deadlines Qualifications: Proficiency in AutoCAD Civil 3D Proficiency in OpenRoads Designer Qualified ROW Designer with the Ohio Department of Transportation Knowledge of the Ohio Department of Transportation Right of Way Manual Carlson Survey software is a plus Experience working in surveying is a plus Experience in preparing ROW plans and legal descriptions Interpret plans and survey field notes High School Diploma or GED 3+ years of experience is desired Professional Surveyor (PS), Professional Engineer (PE), Survey Intern (SI), or Engineer Intern (EI) is a plus but not required Must be able to provide proof of eligibility to work in the United States and authorized to work on a full-time basis. No visa sponsorship available at this time. Position includes the following benefits for Regular Full-Time Employees: Medical and Dental Insurance (employee, spouse, and family) Life Insurance and Short-Term and Long-Term Disability Insurance Supplemental Life and Vision Insurance Paid vacation, sick leave, and eight paid holidays Salary is commensurate with experience and position. WHAT IS IT LIKE TO WORK AT KORDA? See what our employees and partners have to say: ****************************** IMPORTANT: Applicants accepted through January 30, 2026. Please provide resume and cover letter explaining how your experience and background is a match for our needs. If you require accommodation to complete an online application, please contact Human Resources at ************. We are an equal opportunity employer. Applicants and employees are free from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, pregnancy accommodations, reprisal, or other non-merit based factors.

Senior Mechanical Engineer - Columbus, Ohio The salary for this position is between $140,000-$170,000, contingent upon the candidate's experience and demonstrated technical proficiency. We're seeking a full-time mechanical engineer to lead our expanding team and contribute to the design and management of mechanical and piping projects in the pharmaceutical and food & beverage industries. LAPORTE is a consulting engineering firm which has been in business for 25 years. Today, the company has 25 offices across North America and Europe, and over 480 employees with a passion for engineering. Join us for a competitive salary, compensatory PTO, comprehensive benefits, and a supportive work environment that emphasizes professional growth. We believe in a flexible working environment that values work-life balance while encouraging efficiency and creativity on a daily basis. The Senior Mechanical Engineer will be driven to lead projects and a team independently and have experience in developing conceptual, preliminary and detailed designs, drawings, and specifications for the following disciplines: HVAC systems Dust collection Chilled water systems Heating water Controls Plumbing Other responsibilities: Manage contracts and clients for MEP projects Train and grow the Mechanical team Manage and quality review of deliverables and project execution (estimated 50% of workload) Mechanical such as HVAC, hydronic and steam systems design (estimated 50% of workload) Assess the requirements of projects, break them into tasks, and work with the Project Managers to determine the scope of work, budget, and staffing. Write the scope of work for mechanical or utility design based on preliminary review and meetings with the clients. Prepare engineering studies and schematic designs for new systems and analyze the operation of existing systems. Basic Qualifications Bachelor's degree in mechanical engineering Experience in engineering consulting in the food and beverage manufacturing or pharmaceutical manufacturing industries. 8+ years of design engineering experience Knowledge of HVAC system design and experience with central utilities including steam, chilled water and compressed air systems. Design of material handling and dust collection systems an asset Solid knowledge of mechanical codes and standards including ASHRAE, ACGIH and NFPA Familiarity with ISPE and HACCP requirements Proficiency in using the Microsoft Office Suite, AutoCAD, Revit Send us your application today. We look forward to meeting you! The LAPORTE team

An engineering firm that has been in business for decades is hiring a Senior Mechanical Engineer with Healthcare project experience for their Columbus team! Responsibilities: Work closely with management to lead engineering team on healthcare projects HVAC\/plumbing calculations Building load analysis (Trane Trace or Carrier HP) Building\/equipment and program assessments Construction administrative duties including shop drawing review and RFI\/project closeouts Mentor\/train junior staff Complete projects by due date Build\/maintain client relationships Requirements: Bachelor's Degree in Mechanical Engineering 12+ years of mechanical design experience Experience with healthcare engineering, planning and\/or programming HVAC\/plumbing design experience Proficient in AutoCAD and Revit Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! **************************************** ************** "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"37675481","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"47179"},{"field Label":"Location","uitype":1,"value":"Columbus"},{"field Label":"Industry","uitype":2,"value":"Consulting"},{"field Label":"City","uitype":1,"value":"Columbus"},{"field Label":"State\/Province","uitype":1,"value":"Ohio"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"43085"}],"header Name":"Mechanical Engineer (Healthcare)","widget Id":"2**********0059050","is JobBoard":"false","user Id":"2**********0736174","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"2**********3818961","FontSize":"12","google IndexUrl":"https:\/\/harrisonconsultingsolutions.zohorecruit.com\/recruit\/ViewJob.na?digest=8DY.bVOboIBo7ZJhQVLAWB4k60@tcdqcny.5DWFYO58\-&embedsource=Google","location":"Columbus","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"3cgkl37b76de065e24115963f6b2941ca7d80"}

About Us QISG leverages Quanta's comprehensive resources to deliver collaborative solutions for our partners' energy infrastructure needs. We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. About this Role Job Title: Design Engineer - Transmission Line At QISG, our Transmission Line teams play a vital role in the safe, reliable, and efficient delivery of power across communities and regions. We design, build, maintain, and upgrade high-voltage transmission infrastructure that supports the backbone of the electric grid. Whether working on new construction, line upgrades, or critical maintenance, our teams ensure projects are executed with the highest standards of safety, quality, and performance. Our work involves both traditional methods and the latest industry innovations to deliver sustainable, cost-effective, and reliable solutions for our customers. What You'll Do Perform, lead, and oversee all engineering responsibilities related to overhead transmission line design. This includes PLS-CADD modeling, line routing, structure analysis and loading trees, developing design criteria, sag-tension calculations, wire blowout, swing angle, damper Utilize AutoCAD, MicroStation, ArcGIS, and other CAD software for scaled drawings and mapping. Implement engineering redlines with precision and ensure accuracy before finalizing drafting/drawing. Conduct engineering calculations, including voltage drop, cable pulling, flicker analysis, and pole loading assessments. Prepare joint utility use authorizations based on field data and engineer redlines. Ensure compliance with local regulations, design codes (NESC, IEEE, ANSI, IBC), and construction standards. Perform quality reviews to check for inaccuracies, omissions, or compliance issues, and provide recommendations. Work collaboratively with engineers and project teams to develop solutions and modifications as needed. Maintain detailed project documentation and support engineering calculations. Work a minimum of 40 hours per week, with potential for up to 50 hours and occasional overtime. What You'll Bring Bachelor's degree in Civil/Structural Engineering from an ABET-accredited program. 2+ years of related experience with routing and design of high voltage overhead transmission line facilities Proficiency in AutoCAD, MicroStation, ArcGIS, or similar CAD tools. Experience with power distribution engineering software (PLS-POLE, TOWER, SAG10, LPILE, MFAD preferred). Understanding of design codes and standards such as NESC, IEEE, ANSI, IBC. Strong knowledge of engineering drafting and design principles. Ability to travel as necessary, up to 10% of the time What You'll Get Competitive Compensation 401(k) Retirement Plan Holiday Pay Paid Time Off (PTO) Comprehensive Health Coverage Pet Insurance Employee Assistance Program (EAP) Professional Development Tuition Assistance Employee Discount Program Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Application Deadline: 31 July 2026 Department: Civil/Municipal Employment Type: Full Time Reporting To: Mike McAvoy Description The Mannik & Smith Group, Inc. (MSG) is a people focused, award-winning, full-service consulting firm that offers a wide array of services including civil and geotechnical engineering, environmental consulting, planning, landscape architecture, agriculture, surveying and construction support. Our talented staff of 650+ professionals deliver integrated planning, design, engineering and construction solutions to our clients from our offices throughout Ohio, Indiana, Michigan, Pennsylvania, West Virginia and Alabama. Due to MSG's continued growth in our Civil/Municipal Division, a new opening is available for a Project Engineer in Columbus, OH! Key Responsibilities * Work in conjunction with licensed design professionals assisting with the design and preparation of a variety of public and private development projects, including commercial, industrial, residential, energy, water/waste water and community projects throughout the Midwest. * Coordinate with fellow MSG staff across a variety of service sectors including: Surveying, Geotechnical, Environmental, Structural, Traffic, Transportation, Site Construction, etc. * Perform and check various design calculations and performing various tasks as they relate to preparing a design package. * Preparing front end feasibility documents, due diligence reports and zoning studies, project development, storm water modeling and design, cost estimates and detailed design plans. Skills, Knowledge & Expertise * Practical experience in design and plan preparation of site development projects. * Bachelor's degree in Civil Engineering, Landscape Architecture or related engineering field * EI certification in the state of Ohio, with the ability to obtain PE or PLA certification within 6 to 12 months. * Experience with researching and applying various agency design standards to civil engineering projects to successfully achieve approvals. * Ability to apply guidelines and specifications. (i.e., City of Columbus and surrounding counties, ODOT, and etc.) * Proficiency with AutoCAD/Civil 3D grading and pipe networks as well as plan set preparation required. * Proficiency in independent preparation of Hydraulic/Hydrologic reports is preferred. * Roadway design and survey experience are a plus. * Utility design or utility field inspection experience a plus. * The ability to engage reviewing agencies while preparing technical designs and addressing comments is a critical part of our process. * The ideal candidate will be comfortable communicating and coordinating with review agencies. Pay & Benefits * 401(k) w/ company match * Health insurance * Health savings account * Vision insurance * Dental insurance * Flexible schedule * Life insurance * Paid time off * Referral program * Tuition reimbursement It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state and federal laws. #LI-CO1

Job Title: Design Engineer Employment Type: Full-Time Department: Engineering Axionova Engineering Limited is an established leader in the civil engineering industry, recognized for delivering innovative and reliable solutions across multiple sectors. Our team is driven by a commitment to excellence and a passion for designing systems that address complex challenges. We are excited to invite a Design Engineer to join our forward-thinking team to contribute to our ambitious projects and high standards of quality and efficiency Position Overview: Axionova Engineering Limited is seeking a knowledgeable and detail-oriented Design Engineer to join our engineering team. The ideal candidate will have a strong foundation in engineering, with a specialization in system design and process improvement. This role focuses on evaluating and optimizing our systems and equipment, designing new processes, and ensuring that engineering projects meet our standards for quality, cost-effectiveness, and functionality. Key Responsibilities: - System and Process Analysis: Review and assess existing systems and processes, identifying areas for improvement and recommending streamlining opportunities. - Equipment and Process Design: Evaluate current equipment and design new processes or systems that meet Axionovas needs in terms of output, cost, and quality. - Cost Reduction: Make informed recommendations on new systems or designs that could help reduce production and operational costs. - Project Collaboration: Partner with the engineering team to bring designs to fruition, ensuring that equipment and processes align with project requirements. - Project Management: Oversee installation projects, ensuring timely and cost-effective completion while maintaining efficiency and adherence to budgets. - Health and Safety Compliance: Ensure all designs and implementations align with health and safety guidelines, maintaining a safe work environment. - Goal Achievement: Work toward key performance indicators (KPIs) and objectives set by executives, aligning your work with Axionova's strategic goals. Qualifications and Requirements: - Educational Background: Bachelors degree (or higher) in Engineering or a related field. - Experience: Demonstrated experience in a similar design engineering role. - Technical Proficiency: Ability to read, interpret, and execute technical drawings and diagrams accurately. - Project Management Skills: Proven ability to effectively manage engineering projects, from concept to completion. - Analytical Skills: Strong analytical and problem-solving abilities, with meticulous attention to detail. - Communication Skills: Excellent written and verbal communication skills for clear documentation and effective teamwork. - Manufacturing Knowledge: Familiarity with manufacturing processes, machinery, and equipment. - Time Management: Ability to prioritize tasks and manage workload to meet deadlines. - Reporting Skills: Proficient in report writing, conveying project updates and recommendations effectively. Why Join Axionova Engineering Limited? - Opportunity to work with a team of industry leaders. - Competitive compensation and benefits package. - Commitment to continuous learning and professional development. - A role in shaping cutting-edge engineering solutions for various industries. Apply Today If you're a dedicated professional with a passion for engineering innovation and excellence, we encourage you to apply and become part of Axionova Engineering Limited's mission to set new standards in engineering.

Job DescriptionAt ANS, we're not just a consulting engineering firm-we're a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000's Top 250 for our staggering 1,748% growth, we're proud of what we've built and where we're headed. We're allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you'll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Geotechnical Project Engineer to join our team. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: BS in Civil Engineering, Geology, or related degree Valid US Drivers License, and a reliable means of transportation Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month) Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude! Proficiency with Microsoft Office products Minimum 3 years of experience in consulting engineering, or related field Experience in preparing Engineering Reports with strong technical writing skills Experience with working within and leading team environments Working knowledge of geotechnical principles and engineering design “NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE: Technical licensure track including EIT, GIT, PE, PG, PMP, or similar. Experience in planning, implementing, overseeing, and managing subsurface investigation programs Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing Experience with design of foundations, support of excavation systems, and preparing reports Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.) Familiarity with renewable energy sector THE CHALLENGES THAT LIE AHEAD INCLUDE: Working alongside a team of high-performing engineering and technical professionals Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations Actively participating in your career growth, including the opportunity to join elective continuing education courses, being involved in community and professional societies, and managing projects and experiences that stretch you outside of your comfort zone to grow you as a professional. ANS Offers the following benefits to full-time employees: 401(k) matching Dental insurance Health insurance Life insurance Unlimited Paid time off Professional development assistance Vision insurance If you're ready to work on impactful projects that shape the renewable energy future, ANS is the place for you. Your expertise will make a difference- help us deliver engineering solutions that matter. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Danis is a third-generation, family-owned construction manager and builder with a long history of delivering complex, high-quality projects across healthcare, higher education, commercial, and industrial markets. Built on trust, integrity, and a commitment to people, we take pride in creating spaces that strengthen the communities we serve while providing rewarding careers for those who help us build them. As a Project Engineer at Danis, you'll play an integral role in helping deliver high-quality, well-coordinated construction projects from start to finish. You'll work closely with project managers, superintendents, designers, and subcontractors to ensure every phase of construction runs smoothly-on time, within budget, and according to plan. This position offers broad exposure to all aspects of the construction process, from field operations to project planning and documentation. At Danis, we're committed to helping our people build long-term careers. Through Danis University, you'll have access to training, mentorship, and professional development designed to strengthen your technical skills and prepare you for future leadership opportunities. Responsibilities What You'll Do: Project Planning & Coordination * Assist the Project Manager and Superintendent in managing daily administrative and technical project activities. * Develop and update project schedules, helping coordinate work among subcontractors, suppliers, and field teams. * Participate in constructability reviews and site logistics planning to identify and address potential challenges early. * Serve as a communication link between owners, designers, and field personnel, ensuring timely information flow. * Support self-perform operations and subcontractor activities by monitoring progress and documentation through project management software. Quality, Safety & Field Support * Verify that work meets design specifications, drawings, and Danis quality standards. * Review submittals, RFIs, and shop drawings to ensure accuracy and compliance. * Assist with layout verification and field coordination to resolve design or installation discrepancies. * Support implementation of the Danis Safety Program by participating in safety audits, meetings, and pre-installation reviews. * Help track inspections, testing, and quality control documentation. Cost & Documentation Management * Help identify, document, and track changes to project scope and budget. * Assist with processing submittals, change orders, and purchase orders. * Maintain project logs and records, including drawings, submittals, RFIs, and field reports. * Participate in project cost reviews and monthly audits. Collaboration & Relationship Building * Build and maintain positive relationships with owners, architects, engineers, and subcontractors. * Communicate clearly and proactively to keep teams aligned and issues resolved quickly. * Contribute to a culture of teamwork, professionalism, and continuous improvement. * Represent Danis with integrity and professionalism on-site and within the industry. Qualifications What You Bring * Bachelor's degree in Engineering or Construction Management preferred. * 2-5 years of construction experience (internship or full-time) with a general contractor. * Familiarity with construction drawings, specifications, and project management tools. * Strong organizational, communication, and problem-solving skills. * A proactive, team-oriented mindset and interest in growing your career with Danis. Working Conditions You'll spend time both in the office and on active construction sites. Travel between regional offices may be required. Field work may include exposure to varying weather conditions and typical construction environments. Physical Demands Ability to climb ladders and scaffolds, lift up to 50 pounds, and remain on your feet for extended periods. Must have acceptable vision (with correction if necessary) and the ability to safely navigate job sites. Why Danis At Danis, our people are the foundation of our success. We invest in your development through Danis University, mentorship programs, and ongoing opportunities to expand your experience across diverse project types. We're proud to promote from within and support employees as they grow into new roles and take on new responsibilities. Why You'll Love Working Here * You'll gain broad field experience across multiple projects and building systems. * You'll work alongside talented builders and mentors who take pride in doing things right. * You'll have access to ongoing training, technology, and growth opportunities. * You'll join a company that values craftsmanship, teamwork, and continuous improvement. Competitive Total Compensation * Annual merit increases and bonuses recognizing your growing expertise * Profit sharing because your success drives our success Comprehensive Benefits Package * Full health, dental and vision insurance for you and your family * Short-term, long-term, and supplemental insurance coverage * Life insurance for peace of mind Professional Development * Danis University: 45+ training programs to advance your safety expertise * Certification reimbursement and continuing education support * Clear career progression paths within our growing organization Work-Life Integration * Generous vacation and PTO policies * Flexible spending accounts (FSA) and Health Savings Account (HSA) options * 401K retirement planning Purpose-Driven Culture * "Constructing Hope" community outreach program * Work for a company that genuinely values safety over shortcuts * Be part of a team that's building more than structures-we're building careers and communities Join a company where you can build exceptional projects-and a lasting career. EEO Statement Danis is an Equal Opportunity Employer. Danis does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. NO AGENCY CALLS OR SUBMISSIONSDanis does not accept unsolicited resumes from recruitment agencies. Any resumes submitted without a signed agreement will be considered the property of Danis, and no fees will be paid. #LI-ONSITE

Department Civil/Municipal Employment Type Full Time Location Columbus, OH Workplace type Hybrid Key Responsibilities Skills, Knowledge and Expertise Benefits About The Mannik & Smith Group As one of the premier multi-disciplined consulting firms, we work with an exclusive collection of some of the best and fastest growing private entities, municipalities and governmental agencies in the region, nation and around the globe.

Our client is a leading commercial construction company based in Columbus, OH. They are actively hiring Project Engineer II's. These are direct hire / full time positions. Project Engineer personnel are responsible for contributing to the overall safety, direction, completion, and financial outcome of construction projects from initial budget through project closeout. Project Engineer personnel are expected to work with people in all levels of Project Management and Field Supervision to establish operational priorities and ensure a quality project. Major Responsibilities: Project Management Ensure customer satisfaction by identifying and exceeding client needs with the support and direction from a Project Executive or Senior Manager. Estimate, value engineer and develop project Budgets with the support and direction from a Project Executive. Facilitate the subcontractor bid process to include processing, distribution and tracking of all project bidding documentation. Ability to utilize software programs and templates to process, distribute and track all project documentation. Perform following duties with support and direction from a Project Executive Negotiate subcontractor and material buyout; develop and negotiate subcontracts. Plan and schedule projects. Manage jobs in progress including subcontractor coordination, conflict resolution, documentation and ensuring quality and safety on every job. Manage project costs through the ongoing evaluation of labor, material and equipment; continue to forecast and analyze construction costs, exposures and profits through project completion. Perform project closeout. Leadership Provide leadership through building relationships, motivating others, providing clear direction, and cooperative teamwork. Communicate effectively; both written and verbal with support and direction from a Project Executive or other Senior Management. Business Development Interact with clients and potential clients to identify and pursue potential work. Prepare and participate in client presentations and project interviews; negotiate and secure new business under direct and close supervision. Position Qualifications: B.S. in Construction Engineering or related field 3-5 years of experience in construction field Ability to build and maintain strong working relationships Strong written and verbal communication skills Self-motivated with the ability to work independently and as part of a team Detail oriented

Marous Brothers Construction (MBC) is seeking a self-motivated Project Engineer for our Building Groups in Columbus, OH! MBC is recognized as one of the leading construction firms in the Midwest, offering integrated services for complete construction solutions. Learn more about MBC by visiting ******************************* Join Marous Brothers Construction as a Full-Time Project Engineer, also known as Assistant Project Manager, and elevate your career to new heights! Located on The Ohio State University's campus, this onsite position offers you the exhilarating opportunity to shape innovative projects that leave a lasting impact. Your Journey Starts Here: As an Assistant Project Manager, you'll support daily operations across dynamic jobsites. You'll manage RFIs, submittals, material deliveries, and project documentation. Collaborate with seasoned professionals, solve problems creatively, and help drive project success. You should possess a problem-solving mindset, ready to think outside the box when challenges arise on job sites. Time management skills are critical for meeting deadlines and ensuring project milestones are achieved. What Powers Your Path to Success: Bachelor's degree or equivalent experience 1-3 years in a Project Engineer or similar role Strong communication, organization, and analytical skills Familiarity with project management software A proactive, ethical, and team-oriented mindset Why join our team? Top Workplace 2025, 2024, 2023, & 2022 - The Plain Dealer & cleveland.com Top Workplace USA 2025 Competitive compensation package Bonuses Paid Time Off Paid Holidays Dedicated weekly touchpoint sessions to support your growth Procedure manual training Personalized onboarding experience Health insurance 3 Plan Options, including HSA & FSA HSA & FSA Annual Company Contribution $3,000 Referral Bonus Tuition Reimbursement Program Career path opportunities Mentor Program Stability - family owned and operated since 1980 Medical Dental Orthodontic Vision Accident Insurance Critical Illness Hospital Indemnity Life Insurance/AD&D *company paid* 401k Parental Leave STD & LTD *company paid* Paid maternity leave via STD Travel Reimbursement Employee Assistance Program, including Legal & Financial *company paid* Looking for a team that invests in you? We're looking for talented individuals like you to join our team and help us achieve our goals. Be the driving force behind the next Buckeye chapter Check out our other projects in the Columbus area... SITECH Ohio Marous Brothers Construction is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. MBC is also committed to compliance with all fair employment practices regarding citizenship and immigration status. We conduct pre-employment drug testing. Also must be able to pass background check.

An international company with a facility in the Columbus, OH. area is currently seeking Junior Level Electro Mechanical Engineers for long-term opportunities with their growing team. These are exciting opportunities for degreed Engineer candidates looking for a company that offers excellent opportunities for growth, stability, and advancement! The Electro Mechanical Engineer position is salaried with pay rates will be salaried with pay rates anticipated to be between $55,000 to $65,000 annually based on experience and education (we will consider paying more for the right skills). All well qualified candidates will be considered regardless of pay rate. A generous compensation package includes an annual bonus, affordable medical plans, paid holidays / vacation time, 401k, employee events, and more! Qualified Electro Mechanical Engineers will have most, if not all, of the following skills and experience: Bachelors Degree in Mechanical, Electrical, or Electro Mechanical Engineering is required- (no internship candidates). Any experience with power and free conveyors, skid conveyors, and other automated material handling equipment is a plus, but not required. Willingness to create quotes, estimates, and bids for small projects. Electrical and / or Hydraulic troubleshooting background is a plus, but not required. Willingness to travel as needed. Minimal travel is anticipated in the first year, but will increase to 30-40% travel in North America. Willingness to work between 40-50 hours per week. Must be able to work in the United States (no H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc. Should you be qualified and interested, please send an updated copy of your resume to [email protected].

At Integrity Kokosing Pipeline Services LLC (IKPS), we are committed to setting the benchmark in the natural gas industry by delivering exceptional construction services with a focus on safety, quality, and integrity. Proudly Ohio-based but with a reach that extends across multiple states, IKPS offers a comprehensive range of services, including pipeline installation and maintenance, water resource management, integrity management, facility work, and fabrication. Since joining forces with Kokosing in 2012, we have combined our strengths to deliver unparalleled service and innovation. Join our dedicated team and be part of a company that contributes to the overall efficiency and effectiveness of the natural gas industry to drive the future of energy infrastructure. Job Description: About Integrity: At Integrity Kokosing Pipeline Services LLC (IKPS), we are committed to setting the benchmark in the oil and gas industry by delivering exceptional construction services with a focus on safety, quality, and integrity. Proudly Ohio-based but with a reach that extends across multiple states, IKPS offers a comprehensive range of services, including pipeline installation and maintenance, integrity management, facility work, and fabrication. Position Summary: A Project Engineer at Integrity Kokosing works to support the field team in overall project success and progression. By assisting the field team with project planning and coordination, they have a constant pulse on all project activities monitoring project KPIs, costs, billings, schedules, and contracts assisting in the implementation of corrective actions leading to overall project success. If you excel in technical functions such as technical operations, project coordination, scheduling, budgeting, documentation review, and progress reporting, we strongly encourage you to apply! Experience in the construction space is a preference; however, we are open to considering the right individual who is a top performer in the functions listed above as your skills may be very transferrable. Eligibility Requirement: Applicants must be currently authorized to work in the United States on a full-time basis. We are unable to sponsor or take over sponsorship of employment visas at this time. Duties and Responsibilities: * Coordinate with the project team to ensure compliance with the contract, budget, schedule, and job cost * Develop, implement and administer project engineering procedures and other work controlling documents (submittals, RFI's, expediting material deliveries, payment of Subcontractors/Vendors and Owner pay requests) * Work with project teams to gather and review weekly documentation; Timecards, Daily progress reports, JSA, and equipment hour reports * Create subcontracts and schedule work to maintain overall project schedule, perform subcontractor prejob safety meetings * Work with Superintendent to control job costs and production budgets * Prepare and submit accurate and timely monthly cost, income, and cash flow projections * Coordinate, price and assist Project Manager in settlement of change orders and claims * Complete site inspections to produce daily reports of work and subcontractor activities * Update project schedule based on site inspections and progress to produce an accurate timeline and distribute to appropriate stakeholders * Maintain appropriate one call notifications for assigned projects * Review daily progress reports to create and distribute invoices as required by the assigned project requirements * Act as a liaison between project management and field leadership to ensure construction complies with drawings and specifications * Represent assigned project and IKPS during client or project management meetings * Perform additional assignments per supervisor's direction Skills and Abilities: * Ability to travel as this role requires regular and extensive travel within the project geographic region. Anticipate 70% travel in this position * Excellent communication and interpersonal skills, plus demonstrated ability to manage and function in a team of varied disciplines * Understand and interpret safety laws and company policies/standards * Knowledge of construction equipment and techniques, drawings, specifications, building materials, and required standards is preferred * Must be able to read and interpret blueprints and other technical drawings and documents. * Must have project management and organizational planning skills. Education and experience: * Possess a 4-year bachelor's degree in engineering, construction management, or equivalent combinations of technical training and experience is preferred * (5) + years of similar construction engineering experience preferred * Experience with computer software, primarily MS Excel with the ability to learn new software programs, Oracle Primavera for scheduling, Viewpoint for accounting, is preferred Benefits: Integrity Kokosing offers competitive compensation and benefit packages including medical insurance, life insurance, disability insurance, paid time off, mileage reimbursement, per diem, and a 401k program. Integrity Kokosing is an equal employment opportunity employer and affirmation action federal/state contractor. The company does not discriminate on the basis of race, color, religion, sex, sexual, orientation, gender identity, national origin, age, disability, veteran status, or any other protected class. Integrity Kokosing offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. Integrity Kokosing is an equal employment opportunity employer and affirmation action federal/state contractor. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Job DescriptionSalary: Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Join the Ace Electric team for opportunities to work with the best team and build your career with Ace University! Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Mission Critical Quality / Commissioning Project Engineer will be responsible for providing a high level of project-specific administrative support for the onsite Quality and Commissioning Team. The QCx Project Engineer will assist the onsite QCx Manager with the control and organization of product documentation and detailed phase-by-phase tracking. Preferred Job Skills: Knowledge of building codes and regulations including Life Safety, BOCA, NFPA, NEC, and OSHA. Must be able to read and interpret specifications, submittals, single-line diagrams and other contract documents. Ability to work under pressure, while closely tracking QC details of multiple project activities. Strong computer skills and familiarity with Construction Management software and Microsoft Office. Strong verbal and written communication skills are required. Ability to adapt to a fast-paced, hands-on, working environment. Must have experience in a decision-making position, be self-motivated, and have an analytical mindset. Experience collaborating with field and management to understand and implement technological and Quality programs. Acute attention to detail and organizational skills. Ability to maintain the required levels of confidentiality when entrusted with sensitive business, customer, or employee related information. Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. Effective and professional communicator, both written and verbal. Able to maintain a pleasant customer service attitude while under pressure. High level of professional business acumen. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Drivers License. Responsibilities: Drive a quality culture that embraces "Implement Quality from the Start" and coach continuous learning approach that improves project efficiency and quality. Identify areas for improvement while implementing best practices to enhance operational efficiency and reliability. Assist investigations into quality-related incidents, conduct root cause analyses and implement corrective actions, establishing preventative measures to minimize future incidents. Assist in the verification and documentation for all Owner Furnished Contractor Installed (OFCI) equipment, ensuring the conformance with the approved submittal while adhering to the Equipment Protection Plan. Engage with the construction team and QCx team to support Foreign Objects and Debris (FOD) inspections prior to Energization on MV / LV SWGR, MV / LV XFMRs, Panelboards etc. Assist onsite QCx team with administrative support as needed. Participate in required daily, weekly, and monthly meetings (i.e., daily Cx, scheduling, coordination, pre-energization, and staffing meetings). Assist in the coordination of the First Time Energization (FTE) documentation process from start to finish. Identifies potential quality issues from review of construction submittals / specifications. Analyzes upcoming tasks and anticipates equipment installation standards, checklist procedures and training. Conduct regular audits and assessments of processes, systems, and documentation to ensure adherence to quality standards. Manage all project issue logs and punch lists collaborating with all affected and / or responsible parties to mitigate and drive to closure any open issues. Audit Quality Reports documenting field discrepancies and audit findings while coordinating corrective actions. Ascertain information regarding changes to regulations that could impact Mission Critical operations. Identify and assess quality risks associated with Mission Critical operations. Manage / track certain OFCI equipment while communicating status with the construction team. Develop / conduct training pertaining to topics in relation to electrical systems, components, and/or departmental specific. Position Requirements: License: None required. Certification: None required. Education: High School Graduate or GED required. Experience: Minimum of 1-5 years electrical construction, Quality Control, or Commissioning experience required. Working Conditions: Job requires working in all elements, depending on job location, time of year, heat, cold, rain, or snow. Must be able to utilize construction site sanitary facilities (Porta-Johns). Work from all types of ladders and be able to transport/relocate ladders unassisted. Employees personal weight with tools cannot exceed the rated weight capacity of ladders used. Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial lifts, cat walks and other safe work areas. Work in restricted areas (switch gear-room, manholes, utility tunnels and crawl spaces). Wear personal protective equipment as required. Able to work 40 hours per week plus overtime as required, including the possibility of night shifts. Required Physical/Mental Functions: Positively identify colors of wire and other items as required. Must have the ability to safely use the required power tools and test equipment. Must be able to safely operate equipment (lift trucks, aerial lifts, etc.). Comprehend and practice safe work procedures as outlined in Safety Handbook. Operate company trucks with manual and automatic transmission. Read and interpret maps, manuals, work site directions, and written instructions. Operate and work from mechanical personal lifts (electric or gas powered). Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged standing and movement on foot. Climb ladders (all types). Complete overhead work for extended periods of time. Repetitive use of arms, hands, and fingers. AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

About Us Eagle Electrical Services is a comprehensive commercial electrical contracting company with expertise ranging from complete lighting, power, and low voltage installations to mission critical services for sophisticated data centers, medical facilities, and more. We've earned a reputation throughout Columbus and the surrounding area for responsive service and high-quality execution. Job Summary Job Title: Project Engineer Reports to: Sr. Project Manager Location: Plain City, OH FLSA Status: Full-Time Updated: August 2025 COMPANY OVERVIEW Eagle Electrical Services (“Eagle”), an EMCOR Company, is a leading electrical services company providing construction, and services in a variety of markets, including automotive, commercial, healthcare, education, industrial, and mission critical. Eagle is one of six Ohio-based business units under parent company Quebe Holdings, Inc. SUMMARY Eagle Electrical Services seeks a Project Engineer who will be responsible for aiding in the planning, directing, coordinating and budgeting activities concerned with electrical construction projects. The desired result is that our projects are run efficiently with maximum profitability and high customer satisfaction. Through executing, shadowing and mentoring, this role will get the required experience to develop into an Assistant Project Manager. This is an in-person position and does not qualify for hybrid or remote. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following. Other duties will likely be assigned. Participate in estimating hand off meetings. Counts for buyouts of packages. Assist with management of documents for the Field. Assist in establishing project schedule with PM. Assist in creating cost code allocations from initial estimate. Work with PM and Prefab Manager to discuss prefabrication opportunities and coordinate lay out, plan and schedule for any prefabricated assemblies. Assist with project change orders. Work closely within Office and Field to ensure they have the latest drawings. Visit job sites and attend job meetings as needed. Assist with bi-weekly projection on job cost. Manage vendors and track all deliveries of materials. Assist with issuing timely RFIs. Work with Project Coordinators as required for assistance in Purchase and delivery tracking, software inputs, permit pulling, change order management, project close out materials, administrative duties, etc. Assist with job close out manuals and as-builts. Participate in job close out meetings. QUALIFICATIONS To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position Requirements/Preferred Skills, Education and Experience BS in Construction Management or Engineering desirable. Electrical construction knowledge gained through an apprenticeship program is acceptable. Strong communication skills - verbal and written - that promote “working together”. Attention to detail and ability to follow a process. Organizational and time management skills. Problem resolution skills. Demonstrate responsiveness to external and internal customers and ownership of your job and responsibilities is critical. Desire to be part of a team and understand how your role fits into the bigger picture. Demonstrated experience using various software such as Microsoft 365. Will train on Construction related software such Accubid, Bluebeam, CAD. LANGUAGE SKILLS Must have the demonstrated ability to effectively communicate in English, cooperate, and collaborate with multiple levels of customer, employees, unions, government agencies, vendors and suppliers, and other contractor organizations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, see, talk, and hear. The employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is regularly required to walk, reach with hands and arms, climb or balance and stoop, kneel, crouch, or crawl. The employee may occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly required to commute to field locations. The employee must have the ability to navigate around job site locations. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee should expect to sit for long periods in front of a computer and also travel to field locations as needed. While visiting field locations, the employee may be required to work outdoors, be exposed to wet and/or humid conditions; moving mechanical and electrical parts; high, precarious places; dust, fumes or airborne particles; toxic or caustic chemicals; outside weather conditions, extended exposure to sunlight; cold and heat; risk of electrical shock and vibration. The noise level in the work environment is usually moderate to loud. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #quebe #LI-Onsite Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.