Mechanical design engineer jobs in North Little Rock, AR - 81 jobs

We are a large growing mechanical contractor in Arkansas that works on many of Arkansas's biggest and best HVAC and Plumbing Projects. This is a full-time position with great salary and benefits package as well as career-growth opportunities. We are planning to hire Arkansas's best and brightest HVAC and Plumbing Design Engineer's in the near future. Responsibilities: Ensure client satisfaction in early phase of upcoming projects. Review project specifications, design, identify value engineering, and calculations accurately. Attend events, job sites, and meet closely with: Owners, clients, architects, as well as sub-contractors and MEP-Design Engineers. Requirements: Local Stable work history. 5+years of HVAC Engineering and Design experience. Bachelor's degree in Mechanical Engineering, PE License preferred. Strong knowledge in: State and Local HVAC and Plumbing Building Codes, AutoCAD, Microsoft office, Carrier HAP, Trane Trace 700, Revit, BlueBeam, and Navisworks.

We are seeking a candidate for a key leadership role in scheduling for a portfolio of Data Center projects of strategic importance to Meta. The Schedule lead will act as a technical Schedule subject matter expert overseeing all schedule management and reporting for their portfolio of projects. The successful candidate will have focus on speed to market and be a critical partner for the Delivery Team and the Project Controls Lead to forecast and help mitigate schedule related risks and issues on the project, enable commercial accountability, manage schedule health reporting/escalation, and ensure that schedule change management is effective and expedient. Leadership, communication, and organization skills are a must in this highly collaborative, analytical, and strategic role. This position will work closely within the DEC Technical Operations team and various internal departments including Site Project Management teams, Pre-Construction, Contracts, Finance, Accounting, Sourcing and Operations Engineering. **Required Skills:** Area Schedule Lead - Data Center Design, Engineering and Construction Responsibilities: 1. Responsible for end to end schedule coordination and updates, including interface with risk management and pro-active communication of updates and alignment of variance root cause/commentary with Cross-functional partners 2. Identifies, documents, and communicates schedule risks through defined processes, including Risk Registers, health reviews, and New Build Program management meetings 3. Accountable for all aspects of vendor and Contractor schedule management 4. Accountable for Contractor baseline schedule development and evaluation during pre-con, including ensuring adherence to program guidance and specifications. Will lead efforts to optimize schedules for speed to market and successful on-time-delivery 5. Responsible for application of commercial entitlement for contractor Extensions Of Time (EOT) for their designated portfolio of projects. Provide leadership to site teams for Delay Tracking, EOT requests and claims. Responsible for making recommendations that are in line with contract and escalating when site decisions differ from the contractual or program guidance 6. Lead the identification and application of Proactive Risk Indicators in sub-area and ensure all risks are properly escalated to Health Reviews, and other appropriate forums. Lead ad-hoc schedule analysis to support program as required 7. Lead a small team of consultants (if required) to support effective schedule management for the designated portfolio of projects 8. Approximately 50% travel to other Data Center sites within the Area and home office **Minimum Qualifications:** Minimum Qualifications: 9. 10+ years of Planning, Scheduling, Construction Management, or Related field experience 10. Bachelor's degree in Engineering, Construction Management, or Equivalent Technical Field or related field experience 11. Subject Matter Expert in Primavera P6 and other scheduling related methodologies and software 12. Experience developing/managing an Owner's planning/scheduling program 13. Familiar with Data Center, Infrastructure or Construction programs requiring complicated commissioning specifications 14. Demonstrated analytical, communication, problem solving, prioritization, organization and reporting skills 15. Experience leading complex project or program planning and coordination amongst a large group of internal and external project stakeholders 16. Demonstrated experience developing and driving actions or operational adjustments based on schedule or project controls performance metrics 17. Demonstrated experience partnering with cross-functional teams to influence strategic direction **Preferred Qualifications:** Preferred Qualifications: 18. Experience identifying schedule efficiencies and driving programmatic or organizational alignment in changing execution strategies to optimize schedule performance 19. Experience negotiating schedule changes or complex construction claims 20. Successful development and implementation of scheduling or project controls strategies in a large organization 21. Familiar with complex networking systems and electrical infrastructure 22. Experience managing a team of Contingent Worker Schedulers **Public Compensation:** $150,000/year to $209,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@meta.com.

About Us At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Overview The IS Mechanical Designer I will design mechanical systems, components, or assemblies using engineering principles. Responsibilities Works closely with project managers, engineers and contractors to create unique high-level concepts and designs for all assigned projects. Works closely with the team to ensure the successful execution of goals of all assigned projects. Conducts field surveys to identify existing equipment types and system capabilities. Produces design documents including drawings, system flow diagrams and architecture, wiring diagrams, construction details, and equipment scheduling. Delivers concepts and designs according to strict project deadlines. Contributes to all areas of the creative process and department. Performs work under direct supervision. Handles basic issues and problems and refers more complex issues to higher-level staff. Assist with the development of technical reports or related documents. Other duties as assigned or required. Qualifications Required Education, Experience, and Qualifications Associate degree in HVAC Technology, Building Systems Engineering, Construction Management, or related field 1-2 years' experience with building construction, especially mechanical, electrical, plumbing, or automatic temperature controls. Proficiency in AutoCAD and REVIT Strong technical skills Effective oral and written communications skills Vision and Creativity Ability to meet deadlines Planning skills Possesses beginning to working knowledge of the subject matter. Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. Excellent multitasking skills, with the ability to perform duties outside of the scope of work when necessary. Preferred Education, Experience, and Qualifications Bachelor of Science in Engineering degree Building Automation System design and sequence writing experience - Preferred systems include Siemens, JCI, Honeywell, Trane, Struxureware, and Tridium HVAC Design and Commissioning experience - Preferred systems include Chilled Water, Heating Water, Condenser Water, and Steam Higher Education and Healthcare design experience Travel Requirements 10-25% of time will be spent traveling to job site(s)/office location. Physical Activities Climbing stairs. Remaining in a stationary position, often standing or sitting for prolonged periods Repeating motions that may include the wrists, hands and/or fingers Moving about to accomplish tasks or moving from one worksite to another Operating machinery and/or power tools Operating motor vehicles or heavy equipment Environmental Conditions Quiet environment Noisy environment Outdoor elements such as precipitation and wind Small and/or enclosed spaces Physical Demands Light work that includes adjusting and/or moving objects up to 20 pounds ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

Job Description CAD Operator / Designer - Low Voltage Systems Division: Low Voltage Company: State Systems, Inc. Schedule: Monday-Friday Compensation: Competitive pay based on experience + benefits About State Systems, Inc. Founded in Memphis, TN, State Systems, Inc. is a total protection company providing fire protection, low voltage systems, and life-safety solutions across Tennessee, Arkansas, Mississippi, and Alabama. Our mission is simple: to protect life and property every day through integrity, innovation, and superior customer service. We are growing in Northwest Arkansas and seeking a skilled CAD Operator / Designer to support our Low Voltage Division with high-quality system designs and technical documentation. About the Role As a CAD Operator / Designer, you will be responsible for the day-to-day design drawings for our low voltage electrical systems. This role plays a critical part in ensuring systems are code-compliant, build-ready, and accurately reflect project requirements. You'll collaborate closely with technical representatives, sales teams, architects, engineers, and Authorities Having Jurisdiction (AHJs) to deliver precise drawings, submittals, and documentation for fire alarm, access control, security, and nurse call systems. What You'll Do Key Responsibilities: Design fire alarm, access control, security, and nurse call systems in accordance with project specifications, applicable codes, and AHJ requirements. Create shop drawing plans for a wide range of low voltage systems using AutoCAD and design software. Analyze blueprints and survey existing structures to support accurate system design. Coordinate technical submittals with architects, engineers, and AHJs. Perform site visits as required. Maintain strong communication with technical representatives and sales personnel. Produce Operations & Maintenance manuals and as-built drawings for installed systems. What We're Looking For Minimum Qualifications: 2-3 years of experience designing electronic systems and/or fire alarm systems. Proficiency in AutoCAD. Strong working knowledge of NFPA, NEC, IBC, IFC, IMC, and related codes. Proficient in Windows-based software and Microsoft Office. High school diploma or equivalent. Strong analytical and mathematical aptitude. Knowledge of general construction practices and terminology. Ability to multi-task, prioritize, and stay organized. Valid driver's license with a driving record that meets company requirements. Preferred Qualifications: NICET Certification in Fire Protection Engineering Technology - Fire Alarm Systems. Why You'll Love Working Here At State Systems, our employees are the foundation of our success. We offer a professional, collaborative environment where your expertise is valued and your growth is supported. Competitive compensation Excellent benefits program Stable, growing company with long-term opportunity Work that directly contributes to protecting lives and property Join a Leader in Life Safety If you're ready to put your technical skills to work for a company that truly makes a difference, we'd love to hear from you. Apply today to join State Systems - protecting what matters most. Texting Privacy Policy and Information Message type: Informational - you may receive text messages regarding your application and interview scheduling. Message frequency varies based on the hiring process. Message and data rates may apply. You may opt out at any time by texting STOP. Pre-Employment Screening All employment offers are contingent upon successful completion of a background check and drug screening, in accordance with applicable laws and company policy. Equal Opportunity Employer State Systems, Inc. is an Equal Opportunity Employer committed to diversity, inclusion, and providing a workplace free from discrimination and harassment. Powered by JazzHR lgn Kpw0npC

Vestcom, an Avery Dennison Company, designs and builds its own converting and robotic equipment that supports the manufacture and production of our high-quality retail labeling and pricing solutions.. We are seeking a Mechanical Engineer to join our Machine Group. This role is responsible for the design, improvement, and support of our custom manufacturing and automation systems used across Vestcom's production network.. This position requires demonstrated mechanical engineering expertise and independent judgment in solving moderately to highly complex design and process challenges. You will collaborate closely with cross-functional teams in engineering, manufacturing/production, and maintenance to optimize performance, ensure safety compliance, and enable scalability in production. Key Areas of Responsibility: * Overseeing the installation, testing and commissioning of mechanical systems and equipment designs, ensuring compliance with safety standards and regulations. * Designing new devices, components, and systems, using CAD software to create models, and redesigning existing products to improve efficiency or resolve issues. * Developing and testing prototypes to evaluate performance and making necessary design adjustments based on test results. * Supervising the manufacturing process to ensure designs are produced according to specifications and quality standards. * Work cross-functionally in teams, including manual machining, CNC, and assembly * Develop and maintain detailed engineering documentation including blueprints, technical drawings, test procedures, and reports for various stakeholders. * Bachelor's degree in Mechanical Engineering or a closely related engineering discipline. * 3+ years of engineering experience in mechanical system design, robotics, or automation in a manufacturing or R&D setting. * Strong knowledge of mechanical engineering principles, systems and components * Proficiency in CAD and other mechanical design tools, Inventor, AutoCAD * Strong analytical and problem-solving skills with the ability to make independent technical decisions. * Ability to work both individually and in a team environment * Familiarity with automation, robotics, and control systems a plus * Strong written and verbal communication skills for technical documentation and stakeholder updates. * Familiarity with process documentation, equipment validation, and continuous improvement (Lean, Six Sigma, or equivalent). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. All your information will be kept confidential according to EEO guidelines.

Benefits: 401(k) 401(k) matching Bonus based on performance Junior Mechanical/Utility Engineer - Little Rock, AR 💼 Employment Type: Full-Time 🛠️ Experience Level: 5-10 Years 🎓 Education: Bachelor's Degree in Mechanical Engineering or related field 💡 Compensation: Competitive, Based on Experience 🚫 Visa Sponsorship: Not Available 🔧 Industry: Engineering / Utilities / Industrial Position Summary: We are seeking a Junior Mechanical/Utility Engineer with 5-10 years of hands-on experience in mechanical systems, utilities, and facility engineering. The ideal candidate is detail-oriented and brings solid knowledge of HVAC, piping, boilers, and industrial utilities in a manufacturing or production environment. Key Responsibilities: Assist with the design, implementation, and maintenance of mechanical and utility systems (HVAC, compressed air, chilled water, steam, etc.) Support project management for upgrades, installations, and maintenance of facility systems Conduct performance analysis and troubleshooting of utility systems and recommend improvements Ensure systems meet operational, environmental, and safety requirements Maintain accurate documentation of systems, processes, and equipment layouts Collaborate with cross-functional teams including operations, maintenance, and contractors Required Qualifications: 5-10 years of experience in mechanical or utility engineering Bachelor's degree in Mechanical Engineering or a related discipline Strong understanding of industrial utility systems and mechanical infrastructure Familiarity with AutoCAD and engineering software tools Strong analytical and problem-solving skills Excellent verbal and written communication skills Ability to manage multiple tasks and projects in a fast-paced environment Preferred Qualifications: Experience in a manufacturing or industrial setting Familiarity with energy efficiency and sustainability initiatives Professional Engineer (PE) license or working toward licensure Benefits: Comprehensive Health Insurance (Medical, Dental, Vision) Retirement Plans with Company Match Paid Time Off and Holidays Career Development and Training Opportunities Supportive Team Environment Compensation: $75,000.00 - $80,000.00 per year About Us We're more than Software Company with a creative side. We're a full-service creative studio with a serious technology background. We take a holistic view of sales and marketing, building digital brands that deliver real value to our client. As a marketing agency, our innovative digital strategies grab and hold people's attention, and produce the communication and organizing tools needed for success. With a mix optimized to the specific goals of each client and the character of their target customer demographics, we provide true integration across media platforms and channels. Our Vision Inteletech Global, Inc provides consulting services to assist clients with their ongoing demand for changing IT environments. The early 2000s were an exciting time for IT. Digital technology was transforming our lives, and with each innovation, it became clear that digital was the future. We use our Global Delivery Model for the success of every engagement. Improve effectiveness and efficiency of IT application environments by adopting re-usable software platforms. Our onsite teams work directly with our clients to understand and analyze the current-state of problems and design specifically tailored conceptual solutions.

This is a 2026 summer internship in our Engineering department. The intern will will work on multiple cabinetry design improvement ideas and develop proposed solutions. A few of the projects that will be worked include: * Identify cabinet designs that have high risk burn failure build-ups and find a suitable substrate replacement. * Research & propose a design for a new side stowing door mechanism to improve installation and quality. * Research & propose a design to improve the junction at the F6X Fwd Lav/Galley header area to improve installation and reduce gap issues. * Follow-up on previous project EWOs that need some testing on the aircraft. PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): * We will provide Catia V5 & VPM training so that the intern can research 3D designs for project solutions. * Internet research for potential replacement parts * Creation of Product Change Sheet (PCS) to present the new idea(s) to the facility for inputs * Follow-up reviews of project progress (Initial, Mid-term, Final) * Final presentation of all projects worked and status MINIMUM REQUIRED QUALIFICATIONS: * Skilled in using Word, Excel, PowerPoint & other standard Microsoft applications * Good communication skills (both written & verbal) * Willingness to interact with multiple departments inside & outside of design engineering * Must be currently enroll in an accredited college or university and must reside in the United States. ADDITIONAL DESIRED QUALIFICATIONS: * Mechanical Engineering major preferred COMPENSATION: The compensation for this position is $20.00 per hour. This position is eligible for overtime. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

CTI has been a leading Audio Visual provider for over 37 years. Since we began in 1988, our mission has been simple: to provide a fantastic customer experience. At CTI, our biggest asset is our people, and we know that sometimes the most awesome employees don't fit the typical mold. If you are hardworking and friendly and know the importance of fantastic customer service, you could be a good fit at CTI. We have developed a collaborative and lively working environment, where the best and the brightest show up to work each day ready to have fun and employ their passion for and knowledge of technology in everything they do. This creative atmosphere helps us apply and share our skills with our clients, who seek quality, high-end Audio Visual, and Conference Solutions. So, what are we looking for? We are looking for an Audio Visual Design Engineer whose attitude, skills, and work ethic will embody our mission “to provide a fantastic customer experience”-somebody passionate about AV. We take pride in employees who are known in the industry as customer-focused problem-solvers who can get the job done. What are your responsibilities? - Design AV signal flows - Create AV design diagrams - Work with existing architecture and electrical framework to design AV rooms. - Keep up to date with new AV integration technology Will you fit in? -Our employees fearlessly embrace the company culture, and applicants who merely want to punch in their timecards every day are not what we are looking for. -You can work independently with minimal guidance, but aren't afraid to ask the right questions when you need help. -You have strong verbal and written communication skills and can be the face of our company to our clients. Does experience count? - Audio Visual Engineering Experience: 3 years minimum with designing AV signal flows and AV design diagrams, as this is not an entry-level position, and we need a talented integration engineer who can take our clients' ideas and help bring them to fruition. - Education: An associate degree is preferred, but not required. We take into account your experience/skill level and what you bring to the table as an individual. -Attitude and Aptitude: Are key! We need someone who is eager to learn and comes to work ready to tackle any situation. -Must be able to pass a criminal background check and a motor vehicle check. What's in it for you? At CTI, we know our company's success is directly correlated to the success of our employees. So, it's fitting that we thrive on and encourage employee growth, both professionally and personally. Our competitive compensation package includes: -Competitive base salary (DOE) -Employer-matched medical, prescription, and dental insurance (available after 60 days of employment) -Employer matched 401K up to 3% (after 6 months of employment) -Bonus eligibility that is based off our results-oriented incentive plan (after 3 months of employment) -A graduated PTO program, all major holidays off, as well as three “floating” holidays, available upon your first day of employment -Special gifts for significant life events, such as marriage, the birth of a child, and buying a house -Cell phone reimbursement plan -Long- and Short-Term Disability 100% paid by CTI -Life Insurance 100% paid by CTI CTI. is an equal opportunity employer. We do not and shall not discriminate on the basis of race, color, religion, gender, age, national origin, disability, marital status, sexual orientation, or military status in any of its activities or operations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

Arkansas - Remote; Dallas, TX; Fayetteville, AR; Fort Worth, TX; Joplin, MO; Kansas - Remote; Kansas City, MO; Missouri - Remote; Nebraska - Remote; North Kansas City, MO; Omaha, NE; Overland Park, KS; Springfield, MO; Texas - Remote ** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Imagine being a part of a team that pioneers revolutionary energy systems. As a Senior Substation Design Engineer in Olsson's Transmission and Substation team, you'll contribute to an expansive network of substations, switching yards, and advanced electrical technology. Our mission goes beyond enhancing the grid; we are committed to upgrading and innovating electrical systems to meet the evolving energy needs of our communities. In this pivotal role, you will lead the design and execution of substation projects critical to the durability and efficiency of our power infrastructure. From initial planning and feasibility studies to design and construction administration, your expertise will navigate all project phases. You will manage significant projects, engage directly with clients, and collaborate with diverse teams to deliver electrical engineering solutions that ensure sustainable, high-powered outcomes. Key Responsibilities: + Design and Engineering: Spearhead the design and engineering of substations as part of significant power delivery projects. + Project Leadership: Manage project phases from inception to completion, including planning, conducting studies, and overseeing construction. + Client Interaction: Serve as the Project Manager, liaising directly with clients to meet specifications, budgets, and deadlines. + Collaborative Engagement: Work closely with internal teams to deliver engineering solutions that uphold Olsson's standards of quality. + Travel and Communication: Travel to project sites and participate in client meetings as necessary to ensure project success and client satisfaction. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills. + Ability to contribute and work well with a team. + Excellent interpersonal and problem-solving skills. + Bachelor's degree in electrical engineering. + Must be a registered Professional Engineer (PE). + At least eight years of engineering experience, with increasing responsibility. \#LI-DD1 **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

JobID: 9363 JobSchedule: Full time JobShift: : Is the technical source of information for the project and should have a thorough knowledge of the construction documents, subcontracts, and purchase orders. Responds to questions about drawings, specifications, shop drawings, and change orders. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. May assist with the supervision and/or training of Field Engineers. This position includes three 'steps' (I, II, and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 3 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 6 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Demonstrates an understanding of the components of the project management plan (PMP) including the project scope management plan, procurement plan, environmental plan, time management plan, financial plan, quality management and safety plans and risk management plan to ensure successful project execution. Demonstrates a thorough understanding of the change management process. 2. Develops a procurement schedule and integrates it with the project CPM schedule. Procures necessary material and equipment. Coordinates submittals with other trades. Reviews all submittals for compliance with the contract documents. 3. Develops an understanding of the prime contract, subcontracts, purchase order agreements, and allowance items as well as contract drawings and specifications. Administers elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. 4. Maintains "As-built" contract documents. Compiles close-out requirements, including operation and maintenance manuals, warranties, and other job specific items required by the specifications. 5. May participate in concrete form design and related equipment selection and will participates in takeoffs for concrete, asphalt concrete, earthwork, and utilities as required. 6. Plans, acquires, develops and supervises members of the project team to ensure relentless execution of the project. 7. Prepares and maintains quantity reporting mechanisms and coordinates agendas and prepares minutes for all meetings as well as maintaining various project logs. 8. Prepares and reviews change orders, including time extensions, with the appropriate personnel before submittal to the owner. Maintains the change order log and, upon receipt of executed change orders, distributes documents as required to company and subcontractor field personnel. Prepares cost control budget adjustments and executes in a timely manner. 9. Prevents claims, identify potential claims, quantify, mitigate/resolve the effects of those that do occur on a timely basis. Minimum Job Requirements 1. An advanced knowledge of construction engineering technology, codes, standards, etc., plus in depth understanding of the interdependence and relationship between other functional units, is required. 2. Four-year construction related degree or equivalent technical training and related experience, plus a minimum of three to four years of similar construction engineering experience. 3. Must possess excellent communication and interpersonal skills, plus demonstrated ability to manage a team of varied disciplines. Should have the skill/ability to supervise and/or train Field Engineer positions if so required. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. #LI-KW1

SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: www.sigsauer.com Position Summary: The Manufacturing Engineer I, Ammo will use their engineering talent to design, develop, effectively implement, and constantly improve production processes to manufacture elite, world class ammunition for the consumer, law enforcement, and military markets. This role will focus on, but is not limited to, ammunition manufacturing. FLSA: Exempt Job Duties and Responsibilities: Identify safety improvement opportunities and implement solutions. In coordination with Quality Engineering, establish, update, and maintain control plans for in process steps of ammo manufacture including the design and build of gages to verify product quality and master verification of inspection systems. Work with Operations personnel to identify root causes and resolution of issues affecting daily operating equipment efficiency (OEE). Provide day-to-day, hands-on production support for assigned manufacturing processes. Analyze performance data to identify continuous improvement opportunities. Utilize lean or Six Sigma principles to implement efficiency improvements and maintain the gains. Design, develop, and modify touch tooling to improve tool life, product quality, or equipment efficiency through use of SOLIDWORKS and Agile software. Work with Quality Assurance to improve process control using statistical methods to maintain low or zero defects on the line. Develop and control troubleshooting methodologies and data. Develop and implement processes, and production line layouts to support a lean production environment including Kanban replenishment methodologies especially concerning tooling consumption. Work with R&D Engineers to ensure a seamless transition of new products in development to full industrialization. Track assigned tasks and projects along with Engineering Lead or Supervisor using monday.com boards, spreadsheets, and personal notes. Work collaboratively with the in-house automation team to receive, start-up, and assimilate newly built production equipment and meet key performance indicators. Collaboratively create work instructions for the production processes. Effectively implement work instructions through training, communication, videos, or other techniques. Maintain high levels of organization to ensure on-time delivery and product quality. Support higher level Manufacturing Engineers with the improvement and development of new processes, equipment, and products. Maintain research, activity documentation, and preparing reports. Participate in 5s workplace organizational activities and maintain the area in good working order through sustainment activities. Miscellaneous duties as assigned. Education/Experience & Skills: Bachelor of Science degree in Mechanical Engineering or related field with 0-3 years relevant work experience. Knowledge of 3D Design CAD and fundamental knowledge of GD&T. Must be proficient using Microsoft Excel, Word, and PowerPoint. Basic working knowledge of monday.com. Experience in using data analysis programs. Strong analytical thinker, able to evaluate and troubleshoot manufacturing processes and machinery. Must be able to clearly, concisely, and accurately convey ideas and information to others, both verbally and in written form. Self-motivated with ability to drive work with minimum supervision. Ability to time manage and support multiple projects simultaneously and drive to complete on time. Aptitude for detail with the ability to work in a team environment. Knowledge of hunting, shooting sports, firearms, or ammunition reloading. Working Conditions: Prolonged periods of sitting at a desk and working at a computer using a keyboard and mouse performing repetitive tasks. Ability to open file cabinets, reach with hands and arms, bend, and twist, lift and move files. Ability to lift up to 25 pounds. Must wear required Personal Protective Equipment (PPE) where required. Must comply with all work exposure EH&S training requirements and adhere to SIG SAUER Inc. Security Mandates. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Job DescriptionBenefits: 401(k) matching Bonus based on performance Dental insurance Health insurance Paid time off Vision insurance REC is seeking an Environmental Project Engineer to join an Industrial focused team and be part of creating innovative solutions that drive positive change in communities. In this role, you will apply diversified knowledge of engineering principles and practices to a broad variety of assignments and related fields. Must be a Registered Professional Engineer whose supervision and guidance relate largely to overall objectives, critical issues, new concepts, and policy matters. The project engineer supervises, coordinates, and reviews work of engineers or technicians and performs complex or novel assignments that require development of new and improved techniques and procedures. Key Responsibilities: Prepares planning and design documents in appropriate engineering discipline. Coordinates assistant and associate professional staff and technical staffs work; may supervise lower-level staff. Performs process design calculations, prepares cost estimates, and uses economic analyses for comparison of alternatives. Develops project scope of work; develops project schedule; prepares project initiation paperwork; manages budget reviews and schedules progress reports. Coordinates projects with other teams; performs and coordinates design aspects of projects; directs team members on design tasks; maintains project records (correspondence, drawings, and files); coordinates with clients; attends client meetings. Manages the preparation of technical reports, memos, and summaries to effectively communicate findings to clients and internal teams. Serves as project manager for projects. Collaborate with project managers and multidisciplinary teams to ensure project deliverables are completed on time, within budget, and meet client expectations. Assist with marketing / business development and prepare project proposals. Qualifications Bachelors or Masters degree in environmental or civil engineering from an ABET-accredited institution. 6 or more years of relevant environmental or civil engineering experience, specifically with water / wastewater treatment or environmental design. Must be a registered Professional Engineer. Proficiency with engineering tools, software, and methodologies. Strong working knowledge of Civil 3D and AutoCAD.

About Us At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Overview The IS Mechanical Designer III will design mechanical systems, components, or assemblies using engineering principles. Responsibilities Works closely with project managers, engineers and contractors to create unique high-level concepts and designs for all assigned projects. Works closely with the team to ensure the successful execution of goals of all assigned projects. Conducts field surveys to identify existing equipment types and system capabilities. Produces, with limited supervision, design documents including drawings, system flow diagrams and architecture, wiring diagrams, construction details, and equipment scheduling. Delivers concepts and designs according to strict project deadlines. Contributes to all areas of the creative process and department. Handles complex issues and problems and refers only the most complex issues to higher-level staff. Provides leadership, coaching, and/or mentoring to team members. May act as a lead or first-level supervisor. Provides training to designer level staff on basic design principles and standards. Qualifications Required Education, Experience, and Qualifications Associate degree in HVAC Technology, Building Systems Engineering, Construction Management, or related field 4-6 years' design experience Strong proficiency in AutoCAD and REVIT Strong technical skills Effective oral and written communications skills Vision and Creativity Ability to meet deadlines Planning skills Possesses working knowledge of the subject matter. Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. Excellent multitasking skills, with the ability to perform duties outside of the scope of work when necessary. Preferred Education, Experience, and Qualifications Bachelor of Science in Engineering degree Building Automation System design and sequence writing experience - Preferred systems include Siemens, JCI, Honeywell, Trane, Struxureware, and Tridium HVAC Design and Commissioning experience - Preferred systems include Chilled Water, Heating Water, Condenser Water, and Steam Higher Education and Healthcare design experience Travel Requirements 10-25% of time will be spent traveling to job site(s)/office location. Physical Activities Climbing stairs. Moving self in different positions to accomplish tasks in various environments including tight and confined spaces Remaining in a stationary position, often standing or sitting for prolonged periods Repeating motions that may include the wrists, hands and/or fingers Moving about to accomplish tasks or moving from one worksite to another Environmental Conditions Outdoor elements such as precipitation and wind Noisy environment Quiet environment Small and/or enclosed spaces Physical Demands Light work that includes adjusting and/or moving objects up to 20 pounds ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

We are seeking a candidate for a key role overseeing our Contingent Workforce of Project Schedulers. Leadership, communication, and organization skills are important in this highly collaborative, analytical, and strategic role. This position will work closely within the DEC (Design, Engineering and Construction) Business Controls team and various internal departments including Site Project Management teams, Pre-Construction, Contracts, Finance, Accounting, Sourcing and Operations Engineering. **Required Skills:** Area Schedule Lead - Data Center Design, Engineering and Construction Responsibilities: 1. Oversee Contingent Worker schedulers on our dual sites. Review the schedule health reports produced by CW schedulers on site and provide feedback to CW account leads as required 2. Responsible for application of commercial entitlement for schedule. Provide leadership to site teams and CW Schedulers for Delay Tracking, Extension of Time (EOT) requests and claims and coordinate the change evaluation in collaboration with the cost team. Responsible for making recommendations that are in line with contract and escalating when site decisions differ from the contractual or program guidance 3. Support Precon team in ensuring that the GC/TC establishes a baseline that is aligned with precon estimates, and one that can be used as a true target schedule as the job progresses. Ensure all Baseline Expectations are meet and escalate appropriately if Schedule does not meet the revised checklist or DIV1 Spec 4. Accountable for maintaining Integrated Master Schedule (IMS) including reporting to site team, leadership and cross-functional partners 5. Lead the identification and application of Proactive Risk Indicators (Project Kronos) on site and ensure all risks are properly escalated on AHRs and other leadership functions. Collaborate with site teams on schedule mitigation strategies. Track implementation of GC/TC Quality Checklist and End of month Communications 6. Work through any XFN schedule coordination challenges with ISCE, IDC and other partners. Ensure Alignment on each site between Scheduling Team and Cost team at the project level **Minimum Qualifications:** Minimum Qualifications: 7. 10+ years of construction schedule experience 8. Experience with P6 (Primavera 6) and Excel 9. BA/BS in construction management, finance, business or equivalent **Preferred Qualifications:** Preferred Qualifications: 10. 5+ years data center experience **Public Compensation:** $123,000/year to $176,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@meta.com.

Division: Low Voltage Company: State Systems, Inc. Schedule: Monday-Friday Compensation: Competitive pay based on experience + benefits About State Systems, Inc. Founded in Memphis, TN, State Systems, Inc. is a total protection company providing fire protection, low voltage systems, and life-safety solutions across Tennessee, Arkansas, Mississippi, and Alabama. Our mission is simple: to protect life and property every day through integrity, innovation, and superior customer service. We are growing in Northwest Arkansas and seeking a skilled CAD Operator / Designer to support our Low Voltage Division with high-quality system designs and technical documentation. About the Role As a CAD Operator / Designer, you will be responsible for the day-to-day design drawings for our low voltage electrical systems. This role plays a critical part in ensuring systems are code-compliant, build-ready, and accurately reflect project requirements. You'll collaborate closely with technical representatives, sales teams, architects, engineers, and Authorities Having Jurisdiction (AHJs) to deliver precise drawings, submittals, and documentation for fire alarm, access control, security, and nurse call systems. What You'll Do Key Responsibilities: Design fire alarm, access control, security, and nurse call systems in accordance with project specifications, applicable codes, and AHJ requirements. Create shop drawing plans for a wide range of low voltage systems using AutoCAD and design software. Analyze blueprints and survey existing structures to support accurate system design. Coordinate technical submittals with architects, engineers, and AHJs. Perform site visits as required. Maintain strong communication with technical representatives and sales personnel. Produce Operations & Maintenance manuals and as-built drawings for installed systems. What We're Looking For Minimum Qualifications: 2-3 years of experience designing electronic systems and/or fire alarm systems. Proficiency in AutoCAD. Strong working knowledge of NFPA, NEC, IBC, IFC, IMC, and related codes. Proficient in Windows-based software and Microsoft Office. High school diploma or equivalent. Strong analytical and mathematical aptitude. Knowledge of general construction practices and terminology. Ability to multi-task, prioritize, and stay organized. Valid driver's license with a driving record that meets company requirements. Preferred Qualifications: NICET Certification in Fire Protection Engineering Technology - Fire Alarm Systems. Why You'll Love Working Here At State Systems, our employees are the foundation of our success. We offer a professional, collaborative environment where your expertise is valued and your growth is supported. Competitive compensation Excellent benefits program Stable, growing company with long-term opportunity Work that directly contributes to protecting lives and property Join a Leader in Life Safety If you're ready to put your technical skills to work for a company that truly makes a difference, we'd love to hear from you. Apply today to join State Systems - protecting what matters most. Texting Privacy Policy and Information Message type: Informational - you may receive text messages regarding your application and interview scheduling. Message frequency varies based on the hiring process. Message and data rates may apply. You may opt out at any time by texting STOP. Pre-Employment Screening All employment offers are contingent upon successful completion of a background check and drug screening, in accordance with applicable laws and company policy. Equal Opportunity Employer State Systems, Inc. is an Equal Opportunity Employer committed to diversity, inclusion, and providing a workplace free from discrimination and harassment.

Job Description This is a 2026 summer internship in our Engineering department. The intern will work on the update and creation of several design processes and the research & design of standardized parts. A few of the projects that will be worked include: O2 mask work instruction update to help reduce time to create certification reports. Define process for the use of F/List and/or Aeroloc flooring in the aircraft. F1070 Buckley blanket standardization per aircraft per cabinet. Follow-up on previous project EWOs that need some testing on the aircraft. PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): We will provide Catia V5 & VPM training so that the intern can research 3D designs for project solutions. Internet research for potential replacement parts Creation of Product Change Sheet (PCS) to present the new idea(s) to the facility for inputs Follow-up reviews of project progress (Initial, Mid-term, Final) Final presentation of all projects worked and status MINIMUM REQUIRED QUALIFICATIONS: Skilled in using Word, Excel, PowerPoint & other standard Microsoft applications Good communication skills (both written & verbal) Willingness to interact with multiple departments inside & outside of design engineering Must be currently enroll in an accredited college or university and must reside in the United States. ADDITIONAL DESIRED QUALIFICATIONS: Mechanical Engineering major preferred COMPENSATION: The compensation for this position is $20.00 per hour. This position is eligible for overtime. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

JobID: 8051 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Is the technical source of information for the project and should have a thorough knowledge of the construction documents, subcontracts, and purchase orders. Responds to questions about drawings, specifications, shop drawings, and change orders. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. May assist with the supervision and/or training of Field Engineers. This position includes three 'steps' (I, II, and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 3 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 6 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Demonstrates an understanding of the components of the project management plan (PMP) including the project scope management plan, procurement plan, environmental plan, time management plan, financial plan, quality management and safety plans and risk management plan to ensure successful project execution. Demonstrates a thorough understanding of the change management process. 2. Develops a procurement schedule and integrates it with the project CPM schedule. Procures necessary material and equipment. Coordinates submittals with other trades. Reviews all submittals for compliance with the contract documents. 3. Develops an understanding of the prime contract, subcontracts, purchase order agreements, and allowance items as well as contract drawings and specifications. Administers elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. 4. Maintains "As?built" contract documents. Compiles close?out requirements, including operation and maintenance manuals, warranties, and other job?specific items required by the specifications. 5. May participate in concrete form design and related equipment selection and will participates in takeoffs for concrete, asphalt concrete, earthwork, and utilities as required. 6. Plans, acquires, develops and supervises members of the project team to ensure relentless execution of the project. 7. Prepares and maintains quantity reporting mechanisms and coordinates agendas and prepares minutes for all meetings as well as maintaining various project logs. 8. Prepares and reviews change orders, including time extensions, with the appropriate personnel before submittal to the owner. Maintains the change order log and, upon receipt of executed change orders, distributes documents as required to company and subcontractor field personnel. Prepares cost control budget adjustments and executes in a timely manner. 9. Prevents claims, identify potential claims, quantify, mitigate/resolve the effects of those that do occur on a timely basis. Minimum Job Requirements 1. An advanced knowledge of construction engineering technology, codes, standards, etc., plus in?depth understanding of the interdependence and relationship between other functional units, is required. 2. Four?year construction? related degree or equivalent technical training and related experience, plus a minimum of three to four years of similar construction engineering experience. 3. Must possess excellent communication and interpersonal skills, plus demonstrated ability to manage a team of varied disciplines. Should have the skill/ability to supervise and/or train Field Engineer positions if so required. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

About Us At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Overview The IS Mechanical Designer II will design mechanical systems, components, or assemblies using engineering principles. Responsibilities Works closely with project managers, engineers and contractors to create unique high-level concepts and designs for all assigned projects. Works closely with the team to ensure the successful execution of goals of all assigned projects. Conducts field surveys to identify existing equipment types and system capabilities. Produces design documents including drawings, system flow diagrams and architecture, wiring diagrams, construction details, and equipment scheduling. Delivers concepts and designs according to strict project deadlines. Contributes to all areas of the creative process and department. Performs work under direct supervision. Handles basic issues and problems and refers more complex issues to higher-level staff. Assist with the development of technical reports or related documents. Provides leadership, coaching, and/or mentoring to team members. Other duties as assigned or required. Qualifications Required Education, Experience, and Qualifications Associate degree in HVAC Technology, Building Systems Engineering, Construction Management, or related field 2-4 years' experience with building construction, especially mechanical, electrical, plumbing, or automatic temperature controls. Proficiency in AutoCAD and REVIT Strong technical skills Effective oral and written communications skills Vision and Creativity Ability to meet deadlines Planning skills Possesses beginning to working knowledge of the subject matter. Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment. Excellent multitasking skills, with the ability to perform duties outside of the scope of work when necessary. Preferred Education, Experience, and Qualifications Bachelor of Science in Engineering degree Building Automation System design and sequence writing experience - Preferred systems include Siemens, JCI, Honeywell, Trane, Struxureware, and Tridium HVAC Design and Commissioning experience - Preferred systems include Chilled Water, Heating Water, Condenser Water, and Steam Higher Education and Healthcare design experience Travel Requirements 10-25% of time will be spent traveling to job site(s)/office location. Physical Activities Ascending and descending ladders, stairs, scaffolding, ramps, poles Climbing stairs. Remaining in a stationary position, often standing or sitting for prolonged periods Moving about to accomplish tasks or moving from one worksite to another Repeating motions that may include the wrists, hands and/or fingers Environmental Conditions Outdoor elements such as precipitation and wind Low temperature High temperature Noisy environment Physical Demands Light work that includes adjusting and/or moving objects up to 20 pounds ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

JobID: 8051 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Is the technical source of information for the project and should have a thorough knowledge of the construction documents, subcontracts, and purchase orders. Responds to questions about drawings, specifications, shop drawings, and change orders. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. May assist with the supervision and/or training of Field Engineers. This position includes three 'steps' (I, II, and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 3 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 6 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Demonstrates an understanding of the components of the project management plan (PMP) including the project scope management plan, procurement plan, environmental plan, time management plan, financial plan, quality management and safety plans and risk management plan to ensure successful project execution. Demonstrates a thorough understanding of the change management process. 2. Develops a procurement schedule and integrates it with the project CPM schedule. Procures necessary material and equipment. Coordinates submittals with other trades. Reviews all submittals for compliance with the contract documents. 3. Develops an understanding of the prime contract, subcontracts, purchase order agreements, and allowance items as well as contract drawings and specifications. Administers elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. 4. Maintains "As?built" contract documents. Compiles close?out requirements, including operation and maintenance manuals, warranties, and other job?specific items required by the specifications. 5. May participate in concrete form design and related equipment selection and will participates in takeoffs for concrete, asphalt concrete, earthwork, and utilities as required. 6. Plans, acquires, develops and supervises members of the project team to ensure relentless execution of the project. 7. Prepares and maintains quantity reporting mechanisms and coordinates agendas and prepares minutes for all meetings as well as maintaining various project logs. 8. Prepares and reviews change orders, including time extensions, with the appropriate personnel before submittal to the owner. Maintains the change order log and, upon receipt of executed change orders, distributes documents as required to company and subcontractor field personnel. Prepares cost control budget adjustments and executes in a timely manner. 9. Prevents claims, identify potential claims, quantify, mitigate/resolve the effects of those that do occur on a timely basis. Minimum Job Requirements 1. An advanced knowledge of construction engineering technology, codes, standards, etc., plus in?depth understanding of the interdependence and relationship between other functional units, is required. 2. Four?year construction? related degree or equivalent technical training and related experience, plus a minimum of three to four years of similar construction engineering experience. 3. Must possess excellent communication and interpersonal skills, plus demonstrated ability to manage a team of varied disciplines. Should have the skill/ability to supervise and/or train Field Engineer positions if so required. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1