Mechanical design engineer jobs in Renton, WA

Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Amazon Leo's Propulsion Team seeks a Flight Operations Engineer to support the execution of the full mission lifecycle for Leo's satellite constellation. This critical support spans: propulsion pre-launch and go/no-go decisions; early mission propulsion checkouts and commissioning; ascending each vehicle to the altitude and station necessary to provide customer service; formation keeping for the service life of each satellite; as well as the the descent and decommissioning of each satellite. This role will work with Amazon Leo's Mission Operations team, and other Guidance, Navigation, and Control operators to ensure the safe and effective execution of each satellite's mission. The Propulsion Operations Engineer serves as a critical liaison between Amazon Leo Mission Operations and the Propulsion Design Engineering team, executing approved operational responses while supporting the development of improved operational automation. This role combines hands-on operational support with the continuous improvement of processes and automated operational capabilities for the Amazon Leo Propulsion System. A significant portion of the position focuses on developing and improving automated operational responses, including telemetry monitoring and flight data analysis. The engineer will be responsible for creating and reviewing new scripted operations procedures, enhancing existing automated sequences, and formulating responses to novel scenarios that arise. This work requires close collaboration with GNC and Propulsion design engineers (both hardware and software) to ensure all solutions align with established safety and operational parameters. The role involves active participation in troubleshooting and investigating in-flight anomalies, working alongside propulsion subject matter experts and systems engineers. The engineer will contribute to maintaining propulsion system operational health by identifying and assessing potential risks, while also evaluating system health and maneuverability across the constellation, applying criteria approved by the Propulsion Design Engineering team. Professional growth opportunities include potential cross-training in other GNC disciplines, such as attitude determination and control, and supporting the GNC's Flight Dynamics Operations team. This expansion of responsibilities helps ensure comprehensive understanding and support of constellation operations. Given that automated constellation operations run continuously throughout the year, this position requires flexibility in work scheduling. Initially, the role may involve standard working hours with rotating 24/7 on-call responsibilities. As the team expands, the schedule will evolve to cover morning, night, and day shifts across all days of the week, distributed among a team of operators. This scheduling structure ensures continuous coverage and support for the constellation's operational needs. Key job responsibilities Operations Engineering - Serve as primary operational liaison between Propulsion Design Engineering and Amazon Leo flight operations stakeholders - Execute defined propulsion operational responses - Monitor and assess propulsion system health across the constellation - Support investigation and troubleshooting of in-flight anomalies - Escalate to responsible engineers for scenarios where existing automation or runbooks do not apply - Document operational instructions and procedures for the benefit of other Propulsion operators Automation & Software Development - Develop and enhance operational procedures, both manual and automated - Create and review scripted operations procedures (i.e. software development) - Improve telemetry monitoring and flight data analysis capabilities - Support continuous automation improvements for operational sequences - Formulate responses to new operational scenarios for review and approval from the Propulsion Design Engineering team Risk Management & System Health - Identify and assess operational risks - Collaborate in the definition of risk mitigations, owning the their implementation and in-space execution - Apply and scale mechanisms to asses propulsion system health & maneuverability during all mission phases - Contribute to improvements propulsion system concepts of operations (CONOPs) Schedule Availability Requirements - Staff rotating shifts including early morning, late night, and weekends - on a rotating basis constrained by 40h shift assignments - Respond to needs for 24/7 on-call support on a rotating basis About the team Amazon Leo's Propulsion Design Engineering team is part of the broader Guidance, Navigation, and Control (GNC) organization. The Propulsion Design team includes subject matter experts in propulsion technologies, systems engineers, test engineers, mechanical design engineers, and technical program managers. Flight operations is currently supported by this engineering team, and this role is part of an effort to hire and develop dedicated support for Flight Operations to support full scale constellation operations. BASIC QUALIFICATIONS- Bachelor's degree in Engineering, Computer Science, or a related technical field - Knowledge of programming languages such as C/C++, Python, Java or Perl - Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays - 3+ years of professional work (non-internship) experience - Experience working with version control systems - Ability to work at computer workstations for extended periods - Ability to respond to urgent on-call situations - Experience with real-time system monitoring and anomaly response - Demonstrated ability to execute technical procedures and follow operational protocols - Experience with data analysis tools and software PREFERRED QUALIFICATIONS- Experience in satellite operations - Experience in ground systems development of satellite operations systems - Experience in any of the operations roles in satellite navigation, conjunction risk assessment, and maneuver planning. - Experience in cloud-based software systems development Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $116,300/year in our lowest geographic market up to $201,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

TITLE: Mechanical Designer EMPLOYMENT TYPE: Contract to Hire or Direct Hire per client's discretion EXTENSION/CONVERSION: Eligible PAY RANGE: $45-55 p/h W2 BENEFITS: Medical insurance, 401K, sick leave, and employee assistance program. Depending on your package selection, Averro offers PTO, paid holidays, dental/vision, pet, and legal insurance. We are looking for a contract mechanical designer with background in manufacturing and preferred experience with process piping & structural steel like bases, sheet metal, etc. Overview and Focus of the Position The Designer coordinates the collection of data from specifications, sketches, customer layout drawings and instructions provided by others and incorporate this information into detailed drawings. The designer consults with engineers, assembly technicians and other peers while preparing and presenting the drawings. Work assignments vary and are of considerable scope and complexity. Supervision is limited and work is reviewed by peers and more experienced staff as a quality procedure. Responsibilities · Creates 2D and 3D Models. · Creates detailed customer & general layout drawings. · Creates piping and instrumentation diagrams. · Creates dimensional shop drawings for fabrication, drawings include all views and dimensions necessary for fabrication of equipment. · Creates general assembly drawings. · Creates as-built drawings and when necessary takes physical dimensions of equipment to verify accuracy of drawings. · Responsible for coordinating with others to determine if drawings can be executed efficiently and within expected tolerances. · Responsible for preparing part numbers, bill of materials and specifications. · Assist in design process of new concepts. Outcomes and Success Indicators · Successful execution of projects defined by meeting design requirements, on time delivery of equipment and meeting approved budgets for materials and resources · Improved on time delivery of equipment · Reduced rework in production due to design errors · Reduced late parts identification and reduced expediting costs Required Knowledge, Skills, and Abilities · Formal drafting program certification; 2 year associates degree from a technical school preferred · 5+ years experience · Proficient in AutoCAD and SOLIDWORKS (PDM a plus) · Experience creating fabrication drawings per ASME/ANSI standards · Experience with various manufacturing practices and processes such as sheet metal fabrication, machining and casting WHY AVERRO? Averro is a Veteran-Owned organization dedicated to delivering innovative talent solutions, business consulting, and technology services that propel businesses and careers forward. We live by our ethos: Be Curious | Build Trust | Empower Each Other. These values show in our commitment to client satisfaction, timely support, and unmatched consultant care. Our Aim - Your Ascent. Averro is an equal opportunity employer, and we are committed to diversity, equity, and inclusion in the workplace. All qualified applicants will receive consideration for employment, regardless of criminal histories, consistent with legal obligations. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. View our privacy policy here: *******************************************

We are seeking a Senior Hydrology and Hydraulics Engineer to join our growing team in the United States. We are looking for candidates to join either our Sacramento and or Seattle office. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. The Role As a Senior Hydrology and Hydraulics Engineer, you will be responsible for providing engineering inputs integral to large scale hydro projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering inputs often with multi-disciplinary project team members and senior stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our powerhouse and energy capabilities and working with key staff in growing that aspect of the business. You'll also be involved in supporting project management duties, liaising with both internal and external clients as well as assisting with guiding and mentoring graduate engineers within the team. In this role you will lead teams conducting technical work for feasibility studies and engineering designs for a range of water resources projects, including water retaining and conveyance structures, irrigation systems, hydroelectric facilities, and new hydroelectric developments. You will participate in design and business development and play a large role in mentoring the team. You will be working in a collaborative environment with a great team of engineers and scientists, and you will also interface directly with clients. Your Key Responsibilities include but are not limited to: Hydrologic and hydraulic analyses and modelling Design of hydraulic structures, water conveyance and storage systems Preparation of technical reports, drawings, and specifications Preparation of bid/proposal packages Preparation and delivery of professional presentations Collaborate with the project teams and other disciplines within KGS Group Helping to maintain strong relationships with clients Manage water resources projects from the proposal stage through to completion, including establishment of budgets and maintaining client relationships; Pursuing new business opportunities with new and existing clients; Managing and mentoring junior staff. About You Bachelor's degree (B.Sc.) in civil engineering with a specialization in water resources engineering from a recognized university (master's degree is an asset) Minimum of 10 years of experience in hydrology and hydraulics engineering with demonstrated project management skills (i.e., tracking budgets and meeting schedules) Must be registered, or eligible for registration, as a Professional Engineer (P.E.) in California as well as eligible for registration as a professional engineer in the state of Washington, and other states would be an asset. Previous consulting experience is preferred. Highly proactive with exceptional problem solving/analytical skills Strong proficiency in Windows Microsoft Office Strong working technical knowledge of and experience in water resources engineering Demonstrated experience and proficiency in hydrologic and hydraulic studies and designs. Including numerical modelling and analysis with industry standard software Experience in numerical modelling and programing skills will be considered assets. Organizational skills, ability to manage time and resources Excellent English verbal and written communication skills are required. Proficiency in Spanish and or French verbal and written communication skills would be an asset. Candidate must be able to work independently with minimal supervision and as part of multidisciplinary teams Willing and able to work extended hours, when needed, to meet deadlines Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Have a drive, attitude, and commitment to being an active participant in our employee-owned culture is a must. The salary range for this position is $120,000 to $170,000 annually. Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

Who We Are Coughlin Porter Lundeen is a civil and structural engineering firm. Focused in the Pacific Northwest, we partner with clients across markets to bring unique project visions to life. We were founded with the goal of exceeding the standards and services provided by engineering firms. And today, more than 30 years later, that vision continues to guide all that we do. Our core values are the heart of who we are and guide how we work each day. Commitment to Quality, every drawing, every detail. Creativity, from project solutions to the way we define our roles. A “Client-First” Mindset, cultivating long-term partnerships. An Empowered Team, continued learning and development. Collaboration and Respect, with our clients and within our own professional work environment. Community, supporting the causes most important to our staff and city. Description Coughlin Porter Lundeen is seeking a structural project engineer; this position involves the design and preparation of construction documents on diverse project types including a variety of building materials. As an integral member of the design process, structural engineers are challenged to develop project management skills, lead in-house design teams, and work firsthand with a diverse range of clients. Engineers are involved with every aspect of the project from design through construction. This position requires sound technical skills, strong communication skills, and a professional attitude. Minimum Qualifications BSCE or MSCE degree (MSCE Preferred) 4+ years structural design experience P.E. license preferred Physical Requirements Ability to drive as needed to client project locations (primarily in the greater Seattle area). Able to travel by airplane domestically as needed for client projects (outside the greater Seattle area), campus recruiting, conferences, etc. Requires sitting for extended periods of time at a computer, keying and reading content. Will be required to stand, reach, bend, twist, squat, and move about freely in an office environment. May need to be able to lift up to 25 lbs. Able to use office equipment such as phone, copier, printer, etc. Benefits and Compensation $92,000-$115,00 per year (depending on experience and qualifications) Additional compensation for hours worked in excess of 40 hours weekly (paid quarterly) Medical (HSA with employer contributions), dental and vision Company paid life and AD&D insurance Company funded ORCA card PTO (15 days starting) 8 paid national holidays (including 1 floating holiday) 401(k) matching Annual bonuses and profit sharing (at company discretion) Monthly health and wellness stipend Employee assistance program Additional information regarding our workplace and benefits can be found here.

Engineering Design & Testing Corporation (“EDT”) is a professional services organization providing forensic engineering, technical consulting, fire investigation, risk mitigation, and associated services across the United States. Founded in 1978, EDT brings more than 45 years of experience providing objective civil / structural, mechanical, and electrical forensic engineering analysis, accident reconstruction services, and expert witness and litigation support to industrial, manufacturing, insurance, and legal professionals requiring comprehensive, unbiased, technically sound opinions and reporting with a wholistic perspective. As an Employee-Owned company, our team of highly qualified experts are vested in delivering cost-effective, responsive, and reliable professional services and deliverables to our clients. Position Summary: Serves as the Engineer-In-Charge (“EIC”) responsible for coordinating with clients, performing site visits, managing resources, writing reports, and setting deadlines to ensure project deliverables are submitted in a professional and timely manner. Conducts investigations involving MEP systems, mechanical devices, and various types of machinery and / or equipment, including but not limited to, HVAC systems, hydraulic / pneumatic devices, pressure vessels, combustion equipment and / or rotating equipment. Performs root cause analyses, hazard and damage assessments, repair vs. replace evaluations and cost estimates, lab and field testing of materials, and design and manufacture defect evaluations. Must be a licensed professional engineer with a thorough understanding of fundamental engineering principles along with a firm comprehension of the function and operation of a wide range of mechanical components and equipment. Provides expert judgement and forms objective, fact based, technically sound opinions and unbiased conclusions on case assignments from insurance adjusters, independent adjusters, attorneys, and other non-legal, non-insurance clients. Must be willing to travel and physically able to climb, stand, walk and kneel for extended periods of time. Is self-motivated and capable of working independently as well as in a group environment with a dedication to ethics, quality, and customer service. This is a Hybrid/Remote role. The successful candidate must reside in the Pacific Northwest. Primary Duties & Responsibilities: Working independently, while ensuring the timely and cost-effective execution of assigned cases; Serving as the primary point of contact with clients including development and coordination of case budgets, work orders, site visits, cost estimates, and associated deliverables. Maintaining contact with clients on active cases to provide status updates, including case spend and budget status, and addressing questions, needs, or concerns at least every other week, or as otherwise agreed upon; Assisting with the development and ongoing updates to the scopes of work associated with assigned cases, as necessary; Making independent decisions for assigned cases, including the selection of applicable analysis and testing methodologies and identification and selection of resources relevant to execution of the established scope of work; Managing resources for assigned cases, including both in-house and third-party sub-contractors where applicable, to meet established deadlines; Engaging other disciplines to address areas of assignments outside of your experience or expertise / discipline, where necessary; Conducting onsite investigations, testing, and gathering applicable field data on residential, commercial and industrial properties to assess damage and gather evidence of damage and / or loss; Preparation of repair and / or replacement cost estimates, as necessary; Participating in conference calls and / or in-person meetings with clients regarding investigation status and results; Preparation of forensic reports clearly detailing the observations made, documentation and data collected from onsite inspections, laboratory examinations, applicable research conducted, testing and performance analysis results, and the associated conclusions; Providing technical support and testifying as an expert witness in depositions and court proceedings, as necessary; Collaborating with clients, colleagues, attorneys and other industry professionals, as necessary; Maintaining weekly updates to case status reports and working with the Regional Engineering Manager and Chief Engineer to address any issues with clients or your assigned cases; Conducting research and keeping current with industry best practices and emerging technologies; Developing technical topics for publication, industry presentations, and both internal and external training and continuing education development; Supporting EDT's marketing and business development resources including occasionally participating in client-relations meetings, attending industry conferences, preparing marketing and technical presentations, assisting with the development of marketing materials, preparing industry blogs and white papers, and engaging with other industry professionals; Participating in EDT's mentorship program and supporting the training and development of new engineers in conjunction with the Chief Engineer and assigned Training Coordinator; Secure and maintain professional licensure (at Company's expense) in all states where conducting investigations, including remaining current on any continuing education requirements, as necessary. Key Skills & Qualifications: Strong interpersonal skills; Excellent oral and written communication skills with a proven ability to write comprehensive technical reports; Strong organizational and time management skills; Advanced analytical and problem-solving capabilities; A high degree of integrity, honesty and moral values adhering to the Professional Engineer Code of Ethics; Ability to work independently with minimal supervision, as well as within a team environment; A collaborative demeanor with the ability to work through conflict, differing perspectives and opinions, and communicate across differing backgrounds and education levels; Ability to travel out-of-town, with periodic overnight travel required; Have strong PC, Tablet and software skills, including: MS Office - Word, Excel, PowerPoint required; Adobe Acrobat DC , Bluebeam Revu , or comparable PDF software; B.S. or M.S. Degree in Mechanical Engineering required; 4+ years' experience in forensic engineering preferred, relevant mechanical engineering & design experience considered; P.E. License with NCEES registration required; Valid driver's license required; Engineering Design & Testing Corporation is an Equal Opportunity Employer

Pacific Pile & Marine (PPM) is a heavy civil and marine general contractor providing top-tier services along the West Coast of the United States and Canada. Headquartered in Seattle, WA, PPM specializes in diverse marine and transportation infrastructure projects, including bridges, ports, marine structures, dredging, and environmental construction. The company serves regions across Washington, Oregon, Idaho, Montana, Alaska, California, Hawaii, and British Columbia. Known for its cutting-edge industry leadership, PPM seeks motivated, team-oriented professionals to support its innovative and impactful projects. Role Description This is a full-time, on-site Project Engineer role located in Seattle, WA or Anchorage, AK. Project Engineers are responsible for performing duties in the field and directly gathering, calculating, and compiling data for the engineering and business functions of a project. It is expected the Project Engineer will provide technical engineering information to company supervision and field crews to ensure construction work complies with all engineering standards, codes, specifications, and design instruction applicable to one or more disciplines. Essential Duties and Responsibilities: Manage the measurement, review, approval, documentation, and input of project quantities. Construct the project budget from the conformed estimate, working with the superintendent and project manager to select the appropriate work activities and cost codes. Establish and maintain the project contract administration plan. Assist project manager with reviewing and preparing month‐end cost reports including the monthly Progress Statement and Job Operations Report (JOR). Assist with cost forecasting and revenue projections. Manage the project recordkeeping and correspondence functions. Maintain tracking logs for change orders, RFI's, submittals, and letters. Maintain the project daily report. Manage the preparation, review, approval, and forwarding of the project submittals. Prepare and submit progress invoices to the owner with Project Engineer / Project Manager review. Work with superintendents, project engineers, and project managers to develop a project plan to create a project CPM Schedule. Manage and maintain the project schedule. Manage the subcontract and procurement process including directing or performing the solicitation, review, and document preparation elements. Participate in the project safety process, conduct safety inspections, and contribute to weekly toolbox meetings, mass safety meetings, and safety training. Coordinate and assist in the documentation, preparation, and resolution of change orders and extra work efforts. Generate engineering feasibility studies to support planning and scheduling efforts. Assist with managing the collection, review, approval, and processing of the daily labor timesheets. Setup, control, and manage all engineering and project records/files. Provide engineering support to field and office operations. Take the lead in working with designers and/or engineers to do value engineering, material substitutions, and engineering-related constructability issues. Manage the project turnover process as it relates to punch list, quality control, commissioning, final documentation submission, and check‐out of installed systems. Qualifications Bachelor's degree in Engineering or Construction Management or equivalent combination of technical training and related experience. Demonstrated ability to implement, utilize, and manage the cost management process including quantities, cost reports, forecasting, labor reports, and documentation & recordkeeping. Ability to efficiently perform the contract administration functions including correspondence, document control, daily reports, and change orders/claims preparation. Ability to efficiently perform the project administration processes including accounts payable, accounts receivable, and subcontractor/supplier correspondence & tracking. Demonstrated proficiency to develop, analyze, and maintain complex project schedules. Demonstrated understanding of company safety philosophy and a working knowledge of the Safety and Crisis manuals. Effective communication skills, both oral and written, including the ability to compose and edit professional letters to external organizations including customer, vendor, government agencies, and subcontractors. Ability to organize and supervise individual engineering functions. A rudimentary knowledge of survey. Strong computer skills including the ability to use Microsoft products such as Word, Excel, Project, and Outlook. Ability to give oral presentations using PowerPoint. Compensation and Benefits Washington Salary Range of $79,800 to $105,000 depending on experience. Retirement Plan including up to a 4% employer match. Three weeks paid vacation per year. 14 Paid Holidays per year. Sick leave provided per WA Paid Sick Leave Law. Employees (and their families) are covered by Medical, Dental & Vision Benefits. Annual Bonus program Valid driver's license and acceptable driving record required to operate company vehicles. A pre-employment drug screen and background check will be conducted. To apply, please email your resume and salary requirements to ***********************. Pacific Pile & Marine is an Equal Employment Opportunity Employer. All qualified applicants will be considered, regardless of race, gender, or status as an individual with a disability or veteran.

About HV Engineering HV Engineering (HVE) is a mechanical, electrical and plumbing (MEP) consulting engineering firm located in Washington State, with offices in Mountlake Terrace and Spokane Valley. HVE specializes in designs for multifamily, commercial, educational, and healthcare projects. Founded in 1996, we're known for practical solutions to client challenges and hands-on involvement from experienced principals on every project. Your Role We're seeking a candidate who is a licensed PE or EIT with significant HVAC and plumbing design experience who can provide solutions to nuanced challenges, enjoys mentoring junior engineers, and who demands quality while they oversee design efforts from concept through construction. What You'll Do Coordinate with architects, contractors and other disciplines, along with internal team members to ensure fully integrated designs Perform HVAC and Plumbing load calculations, equipment selection, and code compliance reviews Conduct QA/QC on plans, specs, and reports What You Bring Professional Engineer (PE) License or Engineer In Training (EIT) certification 5+ years of experience in plumbing/HVAC design Working knowledge of IMC, UPC, Energy Code and ASHRAE Standards Proficiency in Revit, AutoCAD and Microsoft Office Strong communication, organization, and mentoring skills What We Offer We are targeting a base salary of $100,000 to $150,000, yet it is determined by several factors including education, experience, licensing, and a history of working in the Seattle area. Medical insurance, premiums covered in full for full-time employees Dental insurance, premiums covered 75% by the company SIMPLE IRA with 3% employer match Minimum of fifteen (15) days PTO, and higher for more experienced employees Eight (8) paid holidays Hybrid work (typically, one day in office per week) Please apply by submitting your resume through LinkedIn and one of our team members will be in touch. We are not engaging with third-party recruiters or agencies. Please only apply if you are submitting your own candidacy.

Job Title: Research Engineer Duration: 12 Months W2 Contract We are seeking a Research Engineer for our team that researches new wearable AI devices and interaction models. This role combines development of interactive AI experiences and research of human behavior. Top 3 Must-Have Skills 1+ year experience developing user interfaces / interactive experiences 2+ year experience developing with C++/C# in a game engine (Unity, Unreal), Unity is preferred. 2-3+ years in Python for data analysis (numpy, scipy) Nice-to-Have Skills Familiarity with user research, behavioral experiments Familiarity with sensing technologies (IMU, EMG, cameras, microphones) Advanced degree (MS, PhD) in a related field Experience developing for AR/VR/wearables Experience using ML libraries and/or LLMs Experience w/ C++ Responsibilities Implement user interfaces for internal demos and formal user studies Work with prototype hardware and constellations of computing devices Collaborate with researchers to build data processing pipelines

Job Title JUNIOR MECHANICAL ENGINEER-SW Job Type / Status Full-Time Education Bachelor's Degree Clearance Level Required Secret Job Description In-Service Engineering Department (Code 40): The In-Service Engineering Department plans, organizes, directs and controls NUWC Division, Keyport's efforts to ensure Fleet operational readiness through life-cycle support of combat and weapon systems. Code 40 provides In-Service Engineering Agent (ISEA) and other technical authority functions as assigned, including design, production, test, fielding, sustainment, and improvement modifications. Capabilities include systems engineering, Fleet technical support, lifecycle logistics, obsolescence management, and acquisition engineering support. Program responsibilities include submarine systems, Naval training systems, undersea warfare weapons and vehicles, and surface warfare systems. Products and services include commercial-off-the-shelf (COTS) integration and supportability, software development, technology refreshment, obsolescence management, advanced training systems, distance support, logistics support, direct waterfront support, information assurance (IA)/cyber security, and information systems. Code 40 also provides systems and project engineering leadership for assigned integrated warfare systems technical programs and project team leadership on traditional and non-traditional work assignments, including technology insertion of aircraft carrier and surface combat systems and air and surface ship acoustic sensors, standard equipment, COTS hardware and software, and supply agent projects. Job Requirements Bachelor of Science degree in mechanical engineering, or higher, is desired. Experience in mechanical engineering for complex systems, including design, development, integration, and test is desired. U.S. citizenship and eligibility for a security clearance required; current clearance a plus. Preferred Qualifications: Experience in mechanical engineering development standards and techniques including geometric dimensioning and tolerancing (GD&T) are desired. Experience with electro-mechanical components / systems, configuration management, and CAD systems is desired. For example, experience with Solid Edge/Solid Works, or equivalent, risk identification and mitigation, MATLAB, LabVIEW, T&E analysis, electronics packaging design, and tooling and fixturing design. U.S. Navy submarine/underwater warfare system experience a plus. Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. MRC offers a competitive benefit plan to employees and their eligible family members that includes health, dental, vision, life, and disability plans, paid holidays, accrued leave, accrued vacation, 401K, profit sharing, as well as, any other state or federally required benefits. The hiring wage range is $ 25.00 to $32.00 per hour.

Qualifications: Bachelor of Science in Mechanical, Manufacturing, Industrial, Electrical, or Aerospace Engineering. 7 or more years direct manufacturing and manufacturing engineering experience. Understanding of engineering fundamentals for mechanical design and manufacturing including solid understanding of GD&T. Proficiency in business and engineering software (CAD, PLM, Scheduling, MSOffice, Windchill, etc). Ability to develop processes compliant to industry quality systems such as AS9100. Attentive and responsive with strong verbal and written communication skills. A demonstrated ability to work cooperatively with teams of diverse skills across large geographic distances. Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion. Must be physically able to: support production floor activities; climb stairs and work in small areas Desired: Aerospace/Launch vehicle experience. Broad experience in hardware manufacturing: welding, assembly, integration, instrumentation, cleaning, packaging, fabrication, machining, etc. Experience with Manufacturing Execution Systems/Software and processes Knowledge of fabrication processes, integration processes, and configuration management systems Understanding and applied experiences in Lean Manufacturing Familiar with applicable industry standards

EBD Services Mechanical Designer (Entry Level) Employment Type: Full-time Schedule: In Office Salary Range*: $81,000 to $98,000 per year Role Overview: Qualified applicants should possess an entry level understanding of buildings engineering concepts and be capable of working with senior level staff to support basic Mechanical engineering design tasks. Tasks include Mechanical load calculations, Mechanical device layout and coordination, mechanical coordination, branch circuit design, distribution equipment sizing and feeder design, and use of AutoCAD and Revit to produce design engineering drawings. Key Responsibilities of the Mechanical Designer: Conduct basic interpretations of drawings, codes, and other similar materials. Use Revit and AutoCAD software to produce contract documentation to communicate Mechanical design information. Attend meetings to coordinate the mechanical design with architectural and design engineering partners and contractors. Perform calculations to analyze and design individual building mechanical system components using industry standard software and internal tools. Assist with engineering duties on projects of a basic level of complexity. Assist with collecting data and gathering information to support design decisions. Conduct site observation reports and assist in review of RFIs during construction phase activities. Demonstrated Capabilities: Strong written and verbal communication skills, ability to work in a highly collaborative professional environment. Understanding of mechanical engineering concepts and the ability to effectively communicate ideas to both technical and non-technical project team members, using a variety of methods including email, phone calls, and virtual meetings. Basic knowledge of applicable codes and standards including the National Mechanical Code, Washington State Seattle Energy Codes, and FGI Guidelines. Developing understanding of NFPA 13, 99, and 101. Understanding of Revit and AutoCAD, and the use of the software as a drafting and design tool. Proficiency in Microsoft Office Suite and basic level knowledge with energy modeling software. Education and Experience: Bachelor's degree in mechanical engineering or equivalent degree. Entry level to 1+ years of work experience. Prior experience in MEP consulting engineering is a plus. Work Environment & Requirements: Typical business hours are between 7 AM and 5 PM. At times, work hours will require work outside of normal business hours and may include work on Saturday and Sunday to meet project deadlines and support project requirements for clients with 24x7 business operations (typically less than 10% of time). Travel required within the Continental U.S., Alaska, Hawaii, and Canada. Typically, 5% of the time. The work environment will primarily be in-office at the Company Lynnwood office location to facilitate employee technical growth and mentoring by peers and senior engineering staff. Working with computers and remaining sedentary for extended periods of time while performing technical calculations and developing mechanical drawings/models. Field work which may include exposure to the elements including inclement weather and include transport and handling of sensitive electronic equipment of up to 30 pounds. Physical attendance to perform field investigation, attend in-person design meetings at client/architect locations. Compliance with background check & vaccination policies as required by firm clients which may include Covid, Flu, and other vaccinations as part of Owner requirements for working on site at client facilities. Benefits: EBD Services offers a competitive benefits package including the following: Medical, dental, and vision plan: 100% of premiums paid by the Company for employee, spouse/partner, and their dependents. 401(k) plan including safe harbor company funding of up to 4% of employee base salary. Professional membership fee coverage. Ten paid holidays in each calendar year. Paid Vacation/Sick Leave of up to 15 days per year. Eligible for paid leave in accordance with the State of Washington FMLA requirements. Equal Employment Opportunity: EBD Services provides equal employment opportunities to all qualified employees and applicants and prohibits discrimination on the grounds of race, color, religion, sex, national origin, age, marital status, genetic information, disability, protected veteran status, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. EBD Services complies with all local, state and federal laws and regulations and ensures equitable opportunities in all aspects of employment. EEO including Disability/Protected Veterans *Final agreed upon compensation is based on individual education, qualifications, experience, and work location. Certain roles at EBD Services are bonus eligible. To learn more about EBD Services, visit ************************* EBD Services has partnered with All Things HR, an external HR Consulting Company, to assist with their recruitment process. If you would like to be a part of this dynamic company, apply today!

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. We're working on the future. If you are seeking an iterative, fast-paced environment where you can drive innovation, apply state-of-the-art technologies to solve extreme-scale real world challenges, and provide visible benefit to end-users, this is your opportunity. We're looking for an outstanding Mechanical Designer who combines superb 3D CAD capabilities with a demonstrated ability to get the right work done quickly and effectively. This person must have experience working in a multidisciplinary environment and producing top notch CAD designs. This person must also be comfortable working with large databases and complex constraints. Key job responsibilities - Creation, iteration and management of CAD designs for large system databases - Manage the creation, checking, issuing and revisions of drawings for parts / assemblies - Manage CAD BOM through product lifecycle management system - Work with a team of engineers across multiple disciplines (mechanical, thermal, electrical, structural, manufacturing, metrology, tooling, assembly, test) in the ideation and creation of system concepts - Engage with suppliers and vendors as needed for CAD definition of sourced components/systems - Work with procurement and sourcing in identification and review of manufacturing sources - Bachelor's degree in Mechanical Engineering, Electrical Engineering, related field OR equivalent experience - 3+ years CAD experience in complex mechanical / electro-mechanical assemblies/ machines/ structures/ systems - 1+ years creating, manipulating, iterating and optimizing of mechanical designs with complex interactions / constraints - 1+ years interfacing with a range of engineering disciplines, and understanding the scope of those inputs and requirements - Expert level capability w/ 3D CAD systems - Siemens NX (4+ years in advanced CAD assemblies) - Manufacturing and test knowledge (Forming, Machining, Finishing, Tooling, Assembly, Testing) - Awareness of adhesives, finishes, material properties and selection criteria that influence selection for harsh environments - Experience in optimizing design features to optimize for part cost (material handling, manufacturing, finishing, measurement) - Hands-on experience with manufacturers/machinists/ part producers - Experience in developing fabrication drawings for a range of manufacturing methods (rapid prototyping, machining, forming, composite manufacturing) - Experienced in the CAD database management, CAD Bill of Materials management, and Product Life Cycle Management (PLM) - Experience with change control and management through ERP/MRP systems to manufacturing/assembly personnel - Hands-on support in prototyping assembly and test - Excellent CAD database organization and management skills - Organized, with demonstrable ability to set priorities and meet deadlines - Motivated, highly dependable team player - Possess excellent communication skills, with attention to details Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $124,100/year in our lowest geographic market up to $193,100/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

About Helion We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. Since Helion's founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). We are now operating Polaris, our next prototype on the path to the world's first fusion power plant. This is a pivotal time to join Helion. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths - values essential to achieving what no one has before. Together, we will change the future of energy, because the world can't wait. What You Will Be Doing: As a Mechanical Engineering Intern at Helion, you'll be at the forefront of fusion technology development, playing a crucial role in qualifying systems for new operating conditions and ensuring long-term performance. You'll collaborate on R&D efforts, contributing fresh ideas as we work on next-generation machines, and explore potential system upgrades to enhance overall performance. This internship offers hands-on experience, solving real-world engineering problems that are important to deploying fusion energy to the world. This is a 12-week onsite internship at our Everett, WA office. You Will: Own and understand subsystem designs such as electromagnetic, structural, fluid, thermal, and control systems, and improve their requirements Learn from historical engineering approaches, design novel hardware, and test your solutions Fix hardware issues as they arise on integrated fusion generators Apply both engineering first-principles and method-based thinking to challenging problems Learn from experts to expand your engineering skillset and domain knowledge Required Skills: Ability to work full time, onsite in Everett, WA for a minimum of 12 consecutive weeks during summer 2026 Currently enrolled in a Bachelor's degree in Mechanical Engineering or related field GPA of 3.0 or above Hands-on exposure to a variety of engineering disciplines (e.g. mechanical, electrical, fluids) Experience with 3D CAD software (e.g. NX, SolidWorks) and GD&T Base Pay: $30 / hour #LI-Onsite #LI-MT1 Compensation and Benefits At Helion, we are committed to fostering an equitable environment in every aspect of our operations, including compensation. For our internships, compensation is paid at an hourly base rate and is competitively benchmarked. All interns will also receive a one-time stipend at the start of their internship. Note that compensation for our internships is non-negotiable. Benefits will include paid holidays, sick time, wellness stipend, company and team events, and more to ensure a great experience for all of our interns! Interns receive a $5,000 stipend Helion is an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation during the interview process, please let us know.

Business Unit LIGHTSPEED STUDIOS is made up of passionate players who advance the art & science of game development through great stories, great gameplay, and advanced technology. We are focused on bringing next generation experiences to gamers who want to enjoy them anywhere, anytime, across multiple genres and devices. About the Hiring Team Lightspeed Tech Center is a R&D department under Lightspeed Studios which develop PUBG Mobile and other high-quality games. Our Tech Center leads the research, exploration, and discovery of innovative technologies and provides technical services for all games during all phases of life cycle, including engine, audio, QA, AI, next generation game, technical cooperation, etc. What the Role Entails At Lightspeed Studios NA our studios are game development-oriented, and we are eager to explore pioneering technologies that can navigate future tech requirements. We foster a collaborative and innovative environment where interns can make a real impact. Join us as we push the boundaries of technology! The Opportunity: We are seeking a highly motivated and talented Mechanical Engineering Intern to join our dynamic team. This internship offers a unique opportunity to work on cutting-edge projects at the intersection of mechanical design, hardware development, and embedded systems. You will contribute to the design, prototyping, and testing of innovative mechanical and electromechanical systems. This role is ideal for a Master's level student or recent graduate eager to apply their academic knowledge to real-world challenges. What You'll Do: * Design and Develop: Participate in the design and development of mechanical components and systems, utilizing CAD software and rapid prototyping techniques. * Hardware Integration: Assist in the assembly, integration, and testing of mechanical hardware with embedded systems and electronic components. * Prototyping & Fabrication: Get hands-on experience building and iterating on physical prototypes. This may involve 3D printing, machining, and other fabrication methods. * System Testing & Validation: Contribute to the development and execution of test plans to validate system performance and reliability. * Software Interaction: Work with embedded systems and utilize your C++ skills for tasks related to system control, data acquisition, or interfacing with mechanical hardware. * Linux Environment: Operate within a Linux development environment for specific project tasks. * Documentation: Prepare and maintain technical documentation, including design specifications, assembly instructions, and test reports. * Collaboration: Work closely with a multidisciplinary team of engineers (mechanical, electrical, software) to achieve project goals. Who We Look For Who You Are: * Currently pursuing or recently completed a Master's degree in Mechanical Engineering or a closely related field. * Solid understanding of mechanical engineering principles, including statics, dynamics, materials science, and thermodynamics. * Proficient in C++ programming. * Familiarity with the Linux operating system and command-line interface. * Experience with embedded systems (e.g., microcontrollers, sensors, actuators). * Demonstrable hardware building skills and a hands-on approach to problem-solving. * Strong analytical and problem-solving abilities. * Excellent communication and teamwork skills. * Eagerness to learn and adapt in a fast-paced environment. Bonus Points For: * Proficiency in CAD software (e.g., SolidWorks, Autodesk Inventor, Fusion 360). * Experience with microcontrollers (e.g., Arduino, Raspberry Pi, STM32). * Knowledge of common communication protocols (e.g., I2C, SPI, UART). What You'll Gain: * Hands-on experience in a professional engineering environment. * Exposure to the full product development lifecycle. * Mentorship from experienced engineers. * Opportunity to contribute to meaningful projects. * Enhanced skills in mechanical design, hardware development, C++, Linux, and embedded systems. Location State(s) US-Washington-Bellevue The expected base pay range for this position in the location(s) listed above is $69,305.60 to $120,000.14 per year. Actual pay may vary depending on job-related knowledge, skills, and experience. This position will be eligible for 1 hour of paid sick leave for every 30 hours worked and up to 13 paid holidays throughout the calendar year. Subject to the terms and conditions of the applicable plans then in effect, full-time interns are also eligible to enroll in the Company-sponsored medical plan. Equal Employment Opportunity at Tencent As an equal opportunity employer, we firmly believe that diverse voices fuel our innovation and allow us to better serve our users and the community. We foster an environment where every employee of Tencent feels supported and inspired to achieve individual and common goals.

Dogwood Industries Who We Are Build your future with Dogwood Industries! Dogwood Industries is at the forefront of designing and manufacturing Pre-engineered Panelized Relocatable Metal Buildings, delivering industry leading solutions for mission-critical projects across industrial and DoD markets. Through a precise blend of manufacturing and construction, we enable high-performance, rapidly deployable structures that keep critical missions moving forward. Our team provides leadership in the design process that transforms the way our clients work by delivering buildings as equipment solutions in harsh environments around the world. If you are motivated by innovation, thrive in a fast-paced setting, and want to be part of a team that is revolutionizing the building industry, we'd love to speak with you! General Job Description A Design Engineer at Dogwood Industries provides a critical role in breaking down customer requirements and customizing a solution using standard details and engineered solutions. Working with in-house and 3rd party design team members, the Design Engineer documents solutions in AutoCAD 2D and 3D software and prepares project documents for client and Manufacturing Team customers. A Dogwood Design Engineer will thrive in a fast-paced challenging environment and exhibit excellent time management and problem-solving skills. A successful candidate will have experience as a Design Engineer within the architectural, engineering, and construction industries. Duties & Responsibilities Create AutoCAD drawing sets inclusive of structural, architectural, and product specific design features. Defines project requirements from product/project development through order entry, manufacturing, and delivery. Develops and maintains product standards to fulfill customer requirements. Performs product research and specifies materials and components to meet requirements Conducts material take offs and develops BOMs and details for procurement Detail-oriented and able to extract critical information from specifications Reads and understands technical information Professional approach in working with third party engineers, project teams, and departments Serves as a technical resource to support manufacturing and installation activities by addressing engineering and technical challenges in real-time Fluent in the use of Office, SharePoint, and Adobe applications Other duties as assigned Requirements: Requirements Fluent in AutoCAD and/or Revit. Two years experience with a Bachelors Degree or 5+ years of experience w/out a degree. Experience working in construction or industrial production (mining, oil & gas, etc.) Ability to read, write and speak English fluently Excellent communication and interpersonal skills Experience with pdf editing software such as BlueBeam and/or Adobe Physical Requirements/Work Environment This position requires moderate physical activity, primarily in an office environment but may include visits to jobsites to collaborate and inspect materials. To perform the essential functions of this job, the employee is regularly seated at a computer desk with the option to stand, is utilizing the telephone frequently, and participating in meetings with colleagues. There are stairs in the office. In the factory setting, you may inspect and handle materials and be exposed to shop elements such as noise, dust, fumes, and odors. Compensation $80,000 - $110,000 annually, DOE. Benefits Health Benefits, including medical, dental and vision Company paid and supplemental life insurance Short-term disability Long-term disability Additional voluntary benefits Paid vacation, paid sick leave and paid holidays 401(k) retirement plan, with employer match Employee Referral Bonus Program Applicant Notes Applicants must provide complete work history with employer references for last three to five years All employees are subject to a pre-employment background check and pre-employment and random drug testing. Due to working in / being exposed to a safety sensitive environment, THC testing will occur as part of all drug screens. Application Assistance If you have any questions or need assistance applying, please contact Dogwoods HR department at ************** or ************************. Location This is an onsite position at the Dogwood Corporate Office at 17706 Brickyard Rd NE, Bothell, WA 98011. Travel to Dogwoods Everett Factory or Sedro-Woolley Factory office, as needed. Equal Employment Opportunity: All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other status protected by law. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. Disclaimer: Although the Company has attempted to accurately and thoroughly describe this position, the Company reserves the right to change the same, including to change, add to or subtract from the duties outlined, within the sole discretion of the Company, at any time, with or without advance notice. In order to meet company deadlines, work in excess of 40 hours per week may be required from time to time. PM22 Compensation details: 80000-110000 Yearly Salary PIc5080262cbd1-31181-39153384

Our Client is a multidisciplinary design engineering company that prides itself on customer service. We achieve this through investing in our team and creating a supportive working environment where our team can thrive. Our client's main initiative is building trust within our team is a top priority that is achieved by focusing on the professional development and growth of our team members. We strive to stay current with technologies, adapt within the current industry, and provide a fundamental commitment to mentorship for all employees. Here are a few ways we plan to support you when you are on our team: - A fun and inclusive atmosphere with a people-first philosophy - Flexible and hybrid work schedule options - Team building budgets are allocated to each team, with comped hours for fun and extracurricular activities. - Team building around philanthropic community-based events. - Quarterly check-ins with supervisors to review progress toward personal and professional development goals. - Partnering with you on your path toward certifications and licensing - Networking and ongoing education opportunities through conferences and industry organizations. - Mentorship opportunities internally and through partnering organizations. - One team philosophy between our offices with inter-office project collaboration on regional and national work. - Commitment to company growth to support the personal growth of our team. Skills Revit, Mechanical Design, HVAC, Design, Piping, Plumbing Top Skills Details Revit,Mechanical Design,HVAC Experience Level Expert Level Job Type & Location This is a Permanent position based out of Seattle, WA. Pay and Benefits The pay range for this position is $150000.00 - $450000.00/yr. 401k, highest paying MEP firms in Seattle, bonus, 4 salary evaluations, shareholder opportunities Workplace Type This is a hybrid position in Seattle,WA. Application Deadline This position is anticipated to close on Dec 12, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job Details Seattle Engineering Center - SEC - Seattle, WA Fully RemoteDescription About the Team AeroTECs Engineering Services Department supports and provides comprehensive, full-service aerospace engineering services to customers in aircraft design and certification. The Engineering Services Department is responsible for providing engineering consulting services related to aircraft performance, similarity analysis, reviewing and supporting certification activities, determining test requirements, and planning and documenting testing to meet customer needs. The Engineering Services Department provides several areas of expertise in Flight Sciences, Electrical Systems, Mechanical Systems, Powerplant & FIFA, Air Systems, Cabin Safety, Structures and Liaison Engineering. About the Role The Aerospace Engineer, EWIS (Electrical Wiring Interconnect System) position is responsible for designing, analyzing, and maintaining the electrical configuration of aircraft systems. These EWIS aspects are for various systems and components on an airplane and rotorcraft. This role requires the significant exercise of independent discretion and judgment in matters of significance. In This Role You Will: Review and understand customer specifications, technical documentation, and electrical configurations. Analyze design requirements and perform trade-off studies. Produce and validate electrical documentation, such as wiring diagrams and harness data reports. Create and maintain tracking tools for quality and productivity. Review and analyze the electrical configuration of aircraft systems, read and understand the technical documentation such as schematics. Produce and validate electrical documentation such as wiring diagrams (WD) and harness data report (HDR). Create and maintain quality and productivity tracking tools Work in close cooperation with other engineering disciplines such as Systems, Electrical, Avionics, EMC, Safety, etc. Work in close cooperation with other non-engineering disciplines such as Quality, Logistics, Methods, Customer support, etc. Keep an open and innovative mindset to implement improvements. Qualifications The Skills You Will Bring (Minimum): Education: Four (4) year degree in Engineering (Aerospace or Electrical) or equivalent experience. Experience: Five (5) years aerospace experience in EWIS, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane. Knowledge of aircraft systems (EWIS, Electrical, Avionics, Safety, etc.) is preferred. Strong understanding of electrical harness assemblies, components, and routing. Strong knowledge of aircraft wiring (EWIS) & electrical systems is required. Experience with AutoCAD, CATIA, NX, Capital or any relevant electrical software. Experience working with electrical schematics and test environments. Familiarity with FAR Part 25 subpart H and certification rules addressing EWIS. You are familiar with SAE-AS50881 covering all aspects of EWIS. You are familiar with RTCA/DO-160 environmental conditions & test procedures. Required: Capital Harness (min. 5 years of experience) Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to sit for long periods of time. The employee is occasionally required to climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Occasional travel (flying and driving) to various domestic and international worksites and client offices may be required. Occasional travel to the Moses Lake Facility for extended periods of time during scheduled flight test operations may be required. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, Lawful Permanent Resident, Refugee, or Asylee. AeroTEC is an equal opportunity employer.

Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity. As the Equipment Engineer for an Equipment Group at Amazon Leo, you will be directly responsible for the technical activities in driving improved equipment uptime, availability, and capability improvement for equipment that supports manufacturing our next generation spacecraft. You'll be responsible for the full equipment lifecycle for key integration and test equipment, from requirements specification, design concept, sourcing, integration, qualification, pilot operation, long term OEE improvement projects, and ultimately end-of-life services associated with the equipment you support. You will leverage your expertise in electro-optical systems development & maintenance to ensure smooth integration & high system availability. You'll use data & analysis to produce preventative maintenance programs, troubleshoot protocols, critical spares plans, etc. You'll be a key animating force in the increase in production capacity through vision & execution of capital investment for production scaling & automation of additional equipment as required. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Develop system requirements, and partner with development groups to drive detail design of new equipment • Participate in sourcing plans for complex equipment (COTS & custom) • Lead equipment integration & site acceptance testing • Develop troubleshooting, preventative maintenance, and spares plans for equipment • Support 2nd line escalation of critical equipment downtime • Specify & develop facilities interface requirements (power, network, space, LN2/GN2, PCW) Train & support equipment technicians responsible for routine maintenance, troubleshoot, etc. BASIC QUALIFICATIONS- Experience with prototyping and implementation - Bachelor's degree in electrical engineering or equivalent - Experience reading & developing rack elevation diagrams, wiring diagrams, GD&T etc. - Experience with Programmable Logic Controller (PLC) & Data Acquisition (DAQ) Systems PREFERRED QUALIFICATIONS- Experience in the design of complex mechanical products and equipment at volume - Experience developing equipment maintenance protocols, including Preventative Maintenance activities, Troubleshooting Runbooks, Spare Equipment Plans, etc. - Experience with Fiber Optic Assemblies, Optical Test Systems, and Optical Metrology Equipment Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,600/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Who We Are Coughlin Porter Lundeen is a civil and structural engineering firm. Focused in the Pacific Northwest, we partner with clients across markets to bring unique project visions to life. We were founded with the goal of exceeding the standards and services provided by engineering firms. And today, almost 30 years later, that vision continues to guide all that we do. Our core values are the heart of who we are and guide how we work each day. Commitment to Quality, every drawing, every detail. Creativity, from project solutions to the way we define our roles. A “Client-First” Mindset, cultivating long-term partnerships. An Empowered Team, continued learning and development. Collaboration and Respect, with our clients and within our own professional work environment. Community, supporting the causes most important to our staff and city. Description Coughlin Porter Lundeen is seeking a structural staff engineer; this position involves the design and preparation of construction documents on diverse project types including a variety of building materials. As an integral member of the design process, structural engineers are challenged to develop project management skills, lead in-house design teams, and work firsthand with a diverse range of clients. Engineers are involved with every aspect of the project from design through construction. This position requires sound technical skills, strong communication skills, and a professional attitude. Required Qualifications BSCE or MSCE degree (MSCE Preferred) 0-4 years structural design experience Licensure: Minimum EIT required and in process to get P.E. Requires effective interpersonal, communication, and presentation skills. Must have initiative, be resourceful, and able to work independently. Must be able to effectively prioritize, manage time and projects, and multi-task in a demanding, fast-paced environment. Works effectively as an individual or as part of a project team. Requires fluency in English with strong verbal and written skills. Must be able to effectively collaborate with all levels of management, staff, and clients in diverse environments. Must be proficient in the MS Office Suite of software. Adherence to our core values. Ability to drive locally and travel domestically as needed. Physical Requirements Ability to drive as needed to client project locations (primarily in the greater Seattle area). Able to travel by airplane domestically as needed for client projects (outside the greater Seattle area), campus recruiting, conferences, etc. Requires sitting for extended periods of time at a computer, keying and reading content. Will be required to stand, reach, bend, twist, squat, and move about freely in an office environment. May need to be able to lift up to 25 lbs. Able to use office equipment such as phone, copier, printer, etc. Benefits and Compensation $80,000-90,000 per year (depending on experience and qualifications) Additional compensation for hours worked in excess of 40 hours weekly (paid quarterly) Medical (HSA with employer contributions), dental and vision Company paid life and AD&D insurance Company funded ORCA card PTO (15 days starting) 8 paid national holidays (including 1 floating holiday) 401(k) matching Annual bonuses and profit sharing (at company discretion) Monthly health and wellness stipend Employee assistance program Additional information regarding our workplace and benefits can be found here.