Mechanical design engineer jobs in Tallahassee, FL

Job Title: Mechanical Engineer - Tyndall AFB ***Work Location: Panama City, FL *** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities : Candidate will provide engineering services on several simultaneous federal projects ranging in value up from tens of millions to hundreds of millions of dollars in construction value. Experience with large Federal Building Design, Medical Building Design and/or Construction Projects, or other similarly complex projects is desired. For this requirement, “Large” projects are defined as a construction value of at least $100 million or more. Candidate will be responsible for site observation and reporting on multiple assigned projects to government personnel. Candidate will provide technical and administrative support. Oversee construction, contract administration, and quality assurance activities in accordance with established policies, procedures, and regulations. Analyze design and construction issues with respect to contract requirements. Deliver recommendations to government personnel regarding compliance with contract provisions. Candidate should be prepared to review and interpret plans and specifications, submittals, reports, schedules, modifications, cost estimates, pay applications, change orders and claims. Provide field surveillance and prepare daily detailed reports covering all pertinent factors affecting cost and engineering considerations. Participate in pre-construction conferences with government personnel. Emphasis is placed on knowledge and experience with but not limited to HVAC systems, system controls, building automation, chilled water, plumbing, humidification, data centers, and other complex mechanical-engineering related elements found in large and complex buildings and utility plants. Education/Experience: Bachelors of Science in Mechanical Engineering or related field from an accredited college, preferred. Minimum of 10 years of engineering; construction and contract administration experience. Registered Professional Engineer (P.E.) preferred Army Corp of Engineering (USACE) or other federal project experience, preferred Experience using RMS 3.0, preferred Demonstrate proficiency and effective communications skills in the English language in both oral and written forms Interaction with clients and contractors requires candidate to have a professional presentation along with excellent communication skills and attention to detail. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Department Facilities - Central Utilities Responsibilities * Provides Mechanical Engineering Services including, but not limited to, utility plant boilers and associated steam and condensate pump and piping infrastructure; chillers and associated condenser wells, pumps and piping infrastructure; plant and building HVAC systems, process and fluid flow systems, heat and energy transfer system, plumbing systems and instrumentation and control systems to make substantial renovations and/or upgrades to facilities utilized by the University community. Develops engineering designs and specifications necessary to produce construction documents per the Florida Administrative Code Section 61G15 Chapter 34. Performs detailed estimates of labor and materials required to implement construction documents. Provides construction administration services including, but not limited to, submittal review, commissioning review and inspections. * Responsible for interpreting University policies and federal, state and local codes including, but not limited to, Florida Building Code, NFPA, ASHRAE, ASME, ASPE and ANSI relating to mechanical construction projects. Maintains and updates the FSU design guideline standards. Reviews mechanical engineering designs and specifications for all minor and major projects that are performed by outside engineering consultants for compliance with FSU design guidelines, sound engineering practices, cost effectiveness, energy efficiency and maintainability. * Responsible for supervising the Mechanical Engineering subsection of the FSU Engineering Services department. Signs and seals drawings and specifications prepared under their direct supervision. * Coordinates and administers purchasing, procurement, budgeting, and administrative management for mechanical projects. Assists in developing the campus and utility master planning to facilitate University growth. Assists in developing both the Utilities and Maintenance 5-year capital budget plans. Qualifications * Bachelor's degree in Mechanical Engineering and registered as a professional Mechanical Engineer in accordance with Chapter 471, Florida Statutes * A valid State of Florida or Georgia Driver's License or ability to obtain upon hire. University Information One of the nation's elite research universities, Florida State University preserves, expands, and disseminates knowledge in the sciences, technology, arts, humanities, and professions, while embracing a philosophy of learning strongly rooted in the traditions of the liberal arts and critical thinking. Founded in 1851, Florida State University is the oldest continuous site of higher education in Florida. FSU is a community steeped in tradition that fosters research and encourages creativity. At FSU, there's the excitement of being part of a vibrant academic and professional community, surrounded by people whose ideas are shaping tomorrow's news! Learn more about our university and campuses. FSU Total Rewards FSU offers a robust Total Rewards package. Visit our website to learn more about our Compensation, Benefits, Wellness, Recognition, and Employee Development programs. Use our interactive tool to calculate Total Compensation options based on potential salary, benefits and retirement contributions, earned leave, and other employment-related perks. How To Apply If qualified and interested in a specific job opening as advertised, apply to Florida State University at ********************* If you are a current FSU employee, apply via my FSU > Self Service. Applicants are required to complete the online application with all applicable information. Applications must include all work history up to ten years, and education details even if attaching a resume. Considerations This is an A&P position. This position requires successful completion of a criminal history background check. This posting is being re-advertised. Previous applicants need not apply. Equal Employment Opportunity FSU is an Equal Employment Opportunity Employer.

Impact Recruitment is currently searching for a highly motivated Roadway Design Engineer to join our client's team in Tallahassee, FL. The ideal candidate will assist a team of Engineers on a variety of projects such as Roadway design, Drainage design, and Engineering studies by performing engineering-related tasks including research, development, design, plans production and delivery on assigned project(s). Focused on creating inspired careers, our client offers excellent opportunities for career growth and professional development within their organization. What you'll be doing: Contributes to the preparation or modification of reports, plans and designs for projects using latest software and 3D Design Techniques. Assists in the preparation of project quantity and cost estimates. Performs other duties as assigned. Participate in the collection and analysis of data and preparation of satisfactory designs. Perform design calculations and conduct investigative analyses toward completion of assigned design tasks, and direct preparation of design specifications. What you need to have: Bachelor's degree in Civil Engineering Emphasis in Transportation engineering (if a focus was required for degree) Previous FDOT experience desired but not required EIT (E.I) Certification is desired but not required Experience with MicroStation (preferred) and/or AutoCAD About Impact Recruitment: At Impact Recruitment, our goal is to facilitate the partnership of innovative organizations and inspired individuals seeking to affect positive social and environmental impact in our communities. We invite you to consider a career opportunity through Impact Recruitment. Contact us today at info@impactrecruitment.com/************** to learn more about our position and to see whether this is the right career fit for you! Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

Job Description Check-Mate Manufacturing LLC located in Thomasville, GA. Over the past 40 years, Check-Mate has proven to be the winning move for hundreds of customers in a diverse range of industries including aerospace, automotive, firearms, cosmetics, and medical industries. The unsurpassed customer service of the company has long been recognized as an innovator and leader in tool & die, stampings and assemblies. Whether producing high-precision tools and progressive dies, stamping, or assemblies for everything from healthcare to personal security products, Check-Mate out-thinks , out-maneuvers , and out -performs its competition. MANUFACTURING ENGINEER (With Strong Metals background) ***UNITED STATES CITIZEN OR GREEN CARD HOLDER ONLY*** ***(NO SPONSORSHIPS AVAILABLE)*** SUMMARY OF POSITION: Manufacturing Engineer responsibilities include development and implementation of best practices and new processes, identifying and driving process improvements, ownership of new product launches, serving as a technical expert for the company and customers, leadership and mentoring of less experienced peers, and new equipment and process specification and design. The candidate for this position must have demonstrated the application of best practices and lessons learned, complex mechatronics design / quoting / implementation experience, process development, value stream mapping and improvement, and creativity to develop World Class Processes with our Operations, Tool & Die, QA, HR, and Facilities teams. ESSENTIAL FUNCTIONS Includes, but may not be limited to the following: Manufacturing Engineer utilizes complex data analysis techniques to identify and correct process variances. Manufacturing Engineer represents the Check-Mate Engineering organization. Shows self to be a technical leader on projects to internal and external customers. Manufacturing Engineer leads and manages teams during product and process development. Manufacturing Engineer provides operations and supplier support domestically and internationally. Manufacturing Engineer leads and participates in design reviews, owning and resolving action items. Manufacturing Engineer interacts with senior external personnel (customers / suppliers) on significant technical matters requiring coordination within and between organizations. Manufacturing Engineer must have thorough understanding of ERP systems including process specific data collection, validation, and presentation. Key expectations for this position include high level problem solving, along with technical leadership in the development of new processes. Senior manufacturing engineers will be required to make sound technical decisions, provide mentoring and leadership to junior engineers, and manage expenses and requirements of assigned tasks. This position will require effective communications with other engineers, tooling designers, maintenance, operators, engineers from other disciplines, along with line and program management and Customers, and our Executive Team. Minimum Requirements: B.S. degree in Systems, Industrial, or Mechanical Engineering or equivalent manufacturing education and experience 7+ years' experience in technical process support of manufacturing operations High Level project management, value stream metric analysis, process control 5+ years Solving complex technical problems that require the regular use of ingenuity and creativity 5+ years' Mechanical design, analysis, and documentation of tooling and processes Experience with Metal Stamping, Fabrication, Assembly and Tooling Must be able to communicate efficiently and effectively (verbal, written, and electronic) to all levels of the organization A3 Communication or other CER / Project justification methods Completely qualified with MS Office, ERP systems, 3D modeling (SolidWorks, Inventor, or Creo). CNC machine operation and / or setup a plus. Proven project leadership / planning / communication - must give specific examples Problem solving skills and familiarity with multiple methods are a must - Shainin / L6S / 5-Why / PDCA Attention to detail and time management, deadline driven Must be able to thrive in a team setting with cross functional teams Must be able to handle multiple projects and maintain deadlines for same EOE/AA/M/F/VET/D Powered by JazzHR dNT8noqIA3

What if you were given the opportunity and responsibility to make a difference? At International Paper, you control your destiny. We offer challenging assignments and total rewards in countries around the world. When we say infinite possibilities, we mean it. Apply now and join a community that improves people's lives, the planet and our company's performance by transforming renewable resources into products people depend on every day. **Project Engineer - Packaging Solutions North America (PSNA) Engineering** **Position Title:** Project Engineer **Pay Rate: $115,000 - $134,000** _Multiple factors, including Individual experience, skills and abilities will determine where an employee is ultimately placed in the pay range._ **Category/Shift:** Salaried Full-Time **Physical Location:** Memphis TN. Does not require relocation to Memphis. Must live near an US airport as this position requires approximately 50% travel. **The Job You Will Perform:** + Responsible for engineering and managing the installation of equipment within corrugated manufacturing facilities. + Directly responsible to assure all capital and repair projects assigned are installed as per the project scope, schedule, cost estimate and budget, and with minimum plant production interference. + Reports to the Project Engineer Lead in PSNA Engineering. The PL of this role may vary (PL 14, 15 or 16) according to candidate skill set and experience. + Lead the project management of multiple, concurrent projects involving installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing the project to fruition. + Perform detailed engineering for installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Travel to sites as needed to manage major and minor projects & equipment installations. + Act as the subject matter expert and discussion partner to Packaging Solutions North America (PSNA) facilities on all aspects of the corrugated manufacturing process, and project implementation. **The Qualifications, Skills and Knowledge You Will Bring:** + BS degree or equivalent experience in engineering or related business discipline. + 5+ years corrugated box industry experience including a detailed understanding of corrugated equipment, the corrugating process and applicable OSHA health & safety policies/laws. + Requires understanding of engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations. + Proficiency in Microsoft Office Suite, including Microsoft Project. + Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. + Advanced project management skills with experience managing multiple, current, major and minor engineering projects. + Ability to communicate technical concepts effectively to all levels of company management. + Knowledge and understanding of contractor services - mechanical, electrical, and structural. + Organizing + Time Management + Priority Setting + Action Oriented + Decision Quality + Problem Solving + Functional /Technical **The Benefits You Will Enjoy:** International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term and Long-term Disability, 401(k), Company-funded retirement contributions, Paid Time Off, Education & Development (including Tuition Reimbursement), Student Loan Repayment Assistance, and Voluntary Benefits including insurance for home, auto, vision and pets. **The Career You Will Build:** Sales and Leadership training, promotional opportunities within a global company **The Impact You Will Make:** We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're **Proud to be IP** . **The Culture You Will Experience:** International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. **The Company You Will Join:** International Paper (NYSE: IP) is the global leader in sustainable packaging solutions. With company headquarters in Memphis, Tennessee, USA, and EMEA (Europe, Middle East and Africa) headquarters in London, UK, we employ more than 65,000 team members and serve customers around the world with operations in more than 30 countries. Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time. Net sales for 2024 were $18.6 billion. In 2025, International Paper acquired DS Smith creating an industry leader focused on the attractive and growing North American and EMEA regions. Additional information can be found by visiting internationalpaper.com International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or **************. Memphis TN 38197 Share this job: Location: STATE WIDE, AL, US, #STATE WIDE, NC, US, #STATE WIDE, NM, US, #STATE WIDE, TN, US, #STATE WIDE, MS, US, #STATE WIDE, NV, US, #STATE WIDE, OR, US, #STATE WIDE, CA, US, #STATE WIDE, GA, US, #STATE WIDE, MA, US, #STATE WIDE, LA, US, #STATE WIDE, NJ, US, #STATE WIDE, UT, US, #STATE WIDE, AR, US, #STATE WIDE, MD, US, #STATE WIDE, IA, US, #STATE WIDE, VA, US, #STATE WIDE, TX, US, #STATE WIDE, AZ, US, #STATE WIDE, MI, US, #STATE WIDE, MO, US, #STATE WIDE, KS, US, #STATE WIDE, PA, US, #STATE WIDE, NE, US, #STATE WIDE, CT, US, #STATE WIDE, SD, US, #STATEWIDE, VT, US, #STATE WIDE, MN, US, #STATE WIDE, NH, US, #STATE WIDE, IL, US, #STATE WIDE, CO, US, #STATE WIDE, NY, US, #STATE WIDE, ME, US, #STATE WIDE, WI, US, #STATE WIDE, OH, US, #STATE WIDE, FL, US, #STATE WIDE, RI, US, #STATE WIDE, SC, US, #STATE WIDE, KY, US, #STATE WIDE, OK, US, #STATE WIDE, IN, US, #STATE WIDE, WA, US, # Category: Manufacturing Date: Nov 20, 2025 If you are not finding suitable opportunities, please click below to join our talent community!

RK&K is currently hiring a Structures Project Engineer to join our team in Florida. As a member of our Structures team at RK&K you will play a pivotal role in the design and analysis of transportation structures. You should have state (Florida/FDOT) and municipal experience, be highly proactive, able to develop creative technical solutions, have a strong understanding of structural operations and hands-on experience with bridge design. Essential Functions Utilize expertise in structural engineering principles to design bridge structures that meet project requirements and adhere to regulatory standards Perform structural analyses utilizing industry-standard software tools such as Microstation, Leap Bridge Concrete, AASHTOWare BrR, Open Bridge Designer, or similar programs. Develop detailed design drawings for construction Collaborate with multidisciplinary teams to manage bridge projects from inception through completion Coordinate with contractors and regulatory agencies to ensure projects are delivered on time and within budget Maintain rigorous standards of quality and compliance with relevant codes and standards throughout the design and construction process Conduct thorough reviews of design calculations, drawings, and specifications to ensure accuracy and safety Cultivate strong relationships with clients by understanding their needs, communicating project progress effectively, and providing innovative solutions to address their challenges and requirements Required Skills and Experience Minimum of 5 years of experience in civil engineering with a focus on bridge design and transportation projects. Bachelor's degree in Structural Engineering Professional Engineer (P.E.) in Florida Familiarity with applying industry standards including FDOT Standards, AASHTO LRFD, etc. Ability to adhere to strict QA/QC requirements Multi-tasking, Innovative/Creative thinker and problem solver in a fast paced, team environment. Previous experience working with FDOT, local municipalities and counties Preferred Skills and Experience Wide variety of structural design experience including new and rehabilitated bridges, retaining walls, and misc. other structures. Experience coordinating or participating with the Design Team and Contractor during project execution. Masters degree in Structural Engineering Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Matching 401(k) plan Paid Holidays Tuition reimbursement Health, dental, vision, life and disability insurances Paid parental leave Wellness programs and employee resource groups Career Development Much Much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are looking for a Manufacturing Engineer to join our team. In this role, the Manufacturing Engineer will play a key role in developing, implementing, and optimizing manufacturing processes to ensure the production of high-quality aerospace components. This position requires a strong understanding of precision machining, aerospace industry standards, and continuous improvement methodologies. Responsibilities: Design, implement, and improve manufacturing processes to meet production goals, quality standards, and cost targets. Create and optimize CNC programs for milling, turning and other machining operations. Develop tooling and fixture designs to enhance machining efficiency and precision. Provide hands-on support to machinist and operators for troubleshooting and resolving production issues. Collaborate with other MFG Engineers to ensure manufacturability and adherence to specifications. Conduct root cause analysis and implement corrective actions for quality or process-related issues. Identify opportunities for process improvement and lead initiatives to enhance productivity and reduce waste. Utilize lean manufacturing and Kaizen methodologies to drive efficiency and process control. Prepare and maintain detailed manufacturing work instructions, routings, and process documentation. Ensure compliance with aerospace industry standards, including AS9100 and NADCAP. Participate in audits and ensure adherence to safety, quality, and regulatory requirements. Manage manufacturing projects from concept to completion, ensuring timelines and budgets are met. Coordinate with cross-functional teams, including production, quality, and procurement, to achieve project goals. Evaluate and recommend new tooling, equipment, and technologies to improve machining capabilities. Required Qualifications: Bachelor's degree in manufacturing engineering or related engineering degree 2+ years of experience in a manufacturing or aerospace machining environment Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Proficiency in CNC machining, programming, and set up. Knowledge of GD&T and aerospace standards. Strong problem solving and analytical skills. Proficiency in CAD/CAM software- preferably Siemens NX Familiarity with ERP/MRP systems Excellent communication skills and project management skills. Physical Requirements: While performing the duties of this Job, the employee is regularly required to sit and use hands to finger, handle, or feel. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision and color vision. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

About Us Tallahassee, a diverse community of nearly 200,000 residents, is the state capital and home to Florida A&M University, Florida State University, and Tallahassee State College. It is known for its national forest, freshwater lakes, and abundant parks and recreational activities. Located in the north-central portion of the state of Florida. The City, as an organization, has a devoted workforce of approximately 4,000 people who come together to ensure the needs of the community are met through municipal services. These services include Police, Fire, Utilities (electric, gas, water, wastewater, stormwater), Parks and Recreation, Aviation-Tallahassee International Airport, and general municipal services. The City's mission is to be the national leader in the delivery of public service. The City of Tallahassee's workforce is our community's lifeblood, we offer diverse career opportunities, a positive work-life balance, competitive compensation, exceptional wellness programs, and comprehensive benefits, all of which position us to be the premier employer of choice for this area. Deadline (Open Until Filled) Open until filled. Department Name Electric & Gas Utility Job Specifications MAJOR FUNCTION: Power up your career with the City of Tallahassee's Electric & Gas Utility! We're looking for engineers at all levels to support Power Delivery. From entry-level design and field support to leading complex projects and system studies, you'll play a key role in delivering safe, reliable power to our community. Join one of Florida's top public utilities in Tallahassee, proud All-American City award winner, and build a career with impact, growth, and competitive benefits. What you'll do: All Levels * Provide engineering support across electric utility operations. * Participate in the planning, design, analysis, and maintenance of utility systems such as transmission, distribution, substations, communications, and protection systems. * Contribute to the development and application of standards for design, materials, and construction. * Support field personnel, ensure safety and reliability, and prepare technical documentation as required. Level-Specific Responsibilities Each level builds on the previous with expanded technical, project, and leadership responsibilities. Electric Utility Engineer I: * Assist with designs for utility systems including transmission, distribution, substations, and protection. * Perform field inspections such as staking, safety checks, and preparing field notes. * Provide engineering support and technical assistance to field staff. Electric Utility Engineer II: * Plan, design, and analyze distribution lines, substations, switchgear, protection systems, communications, and related facilities. * Apply engineering standards and practices to ensure reliable system operations. * Contribute technical expertise to utility planning and design projects. Electric Utility Engineer III: * Lead design and analysis of complex utility systems including transmission and distribution facilities, substations, communications, and protection systems. * Supervise preparation of construction drawings and technical documentation. * Prepare project budgets and conduct system coordination studies. * Ensure compliance with codes, standards, and regulations. * Provide customer-focused support including design consultation and cost estimation. For the complete job specification, listing essential duties and desirable qualifications, go to ********************************************************* Minimum Training & Experience Preference may be given to candidates with degrees in Electrical Engineering with Substation or Transmission Design experience. Requirement for all levels: * Bachelor's degree in Engineering * Valid Class E driver's license (or equivalent) at the time of appointment * Designated as essential personnel during emergencies and storm events; must be able to work extended shifts (up to 16 hours per day) and may be required to remain away from home for long periods. * Must be available for on-call duty and flexible to work outside assigned shifts/schedules as operational needs require. * Positions requiring unescorted access to the Electric Control Center must successfully complete a personnel risk assessment, including identity verification and a minimum seven-year criminal history screening, and maintain clearance for continued employment. * Must be able to distinguish between red and green if assigned to System Operations (Relay and System Communications). Electric Utility Engineer II/III: * Must have two years (Electric Utility Engineer II) or five years (Electric Utility Engineer III) of engineering experience in one or more of the electric utility operational areas. * A master's degree in engineering may be substituted for one year of the required experience. An employee assigned to the Purdom or Hopkins Power Plants: * Must be medically certified to wear a respirator and pass a respirator fit test prior to employment. * Must obtain, within one year of employment, and maintain for continued employment, HAZMAT and oil spill certifications. * If assigned to the Purdom Power Plant or occasionally required to have unescorted access to the Port Facility portion of the Purdom Power Plant (as determined by the General Manager-Electric & Gas), must obtain Transportation Workers Identification Credentials (TWIC) within 90 days of employment and maintain such credentials throughout their period of employment in that capacity, as a condition of continued employment. Salary Range $25.1538 to $91.6022/hourly. Driver's License Requirements Must possess a valid Class-E State driver's license at the time of appointment. Additional Information Work Schedule: * During your first six months (the probationary period), you'll work a regular schedule of Monday through Friday, 8:00 AM - 5:00 PM with a one-hour lunch. * After successfully completing probation, you may have the opportunity for added flexibility. With your supervisor's approval, your hours can be adjusted as long as you complete a 40-hour work week between 7:00 AM and 6:00 PM, Monday through Friday. Please note that work hours may occasionally shift based on departmental workload. Benefits Information The City of Tallahassee offers a comprehensive benefits package, including: * Paid vacation, sick leave, parental, and catastrophic illness leave * Defined benefit pension and defined contribution plans * Paid holidays * Tuition reimbursement * Medical, dental, and vision insurance * Life and long-term disability insurance * Pre-paid legal, critical illness, and auto insurance plans For more information about benefits offered to eligible City employees, visit ALEX or 2025 Benefits Summary. Note: OPS employees are eligible for medical insurance plans but not eligible for paid vacation, paid sick leave, or paid holidays. Temporary employees (Non-OPS) are not eligible to participate in the City's benefits programs How To Apply Visit Talgov.com/Employment click on the 'Apply Today' button, then navigate to 'My Job Applications' icon, and create an account. Only online applications will be accepted for this vacancy. Remember, you must complete all sections of the application, including the education and work history section, even if this information is included on your resume. If you have any questions regarding this position or the application process, please contact the City's Human Resources and Workforce Development Department at ************. Equal Opportunity Employer: The City of Tallahassee is an Equal Opportunity Employer committed to promoting equity and celebrating diversity. The City of Tallahassee invites applications without regard to an individual's race, color, gender, religion, national origin, age, disability, marital status, pregnancy, sexual orientation, gender identity, veteran status, or any other characteristics protected by law. Veterans' Preference: Certain service members and veterans, and the spouses of the service members and veterans, will receive preference and priority, and certain service members may be eligible to receive waivers for postsecondary educational requirements. For information on who may be eligible for Veterans' Preference, go to ************************************************************** or call Human Resources & Workforce Development at **************.To claim Veterans' Preference, applicants must upload a DD-214 (and other documentation, as applicable) with their online application prior to the closing date of the job opening. Accommodation for Persons with a Disability: If you require an accommodation, as defined by the Americans with Disabilities Act, please contact the City's ADA Coordinator, in the Office of Diversity & Inclusion, at ************ or at ***************** Monday through Friday, between 8 a.m. and 5 p.m., or TDD 711, at least 48 hours, (excluding weekends and holidays), prior to the application deadline. Apply for Job * Careers * Sign In * New User

JOB SUMMARY: The Design Engineer will assist in maintaining and troubleshooting issues with our automated and semi-automated equipment. Make improvements to equipment to insure we efficiently meet our production, quality, and safety requirements. ESSENTIAL JOB FUNCTIONS: 1. Plan and coordinate special projects, including design and fabrication of production equipment (automated and semi-automated assembly and secondary machines, etc.), material selection and tooling requirements. 2. Evaluate existing mechanical, electromechanical, hydraulic, and pneumatic systems for improved yield and throughput. 3. Develop mechanical/electromechanical fixtures and machines by studying customer requirements. 4. Collaborate with Quality and Process Engineers, and other departments to obtain necessary requirements for writing detailed scopes for the procurement of new equipment. 5. Assures system and product quality by confirming fabrication, assembly, and installation processes. 6. Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special services. 7. Estimate tooling cost from design through fabrication. 8. Coordinate with machine vendor through concept, design, fabrication, runoff, and setup of equipment. 9. Maintain adherence to Company policies and procedures, safety and environmental standards, and good housekeeping practices. 10. Assist maintenance with troubleshooting and repairing production equipment. 11. Other duties as assigned. KNOWLEDGE AND SKILLS: 1. Bachelor's Degree or equivalent combination of experience and work preferable but not required. 2. Advanced 3D Design capability preferably Autodesk Inventor 2024 with a minimum of 8 years' experience. 3. Designing and maintaining automated assembly machines with a minimum of 5 years' experience. (Swanson, Bodine, or similar carousel type assembly machines) 4. Knowledge of hydraulics systems. 5. Knowledge of pneumatics systems. 6. Ability to interpret all types of mechanical, electrical, and pneumatic drawings. 7. Ability to follow projects through to completion. 8. Ability to follow PLC code. 9. Strong communication skills, both oral and written. 10. Excellent organizational and computer skills. 11. Good interpersonal skills. 12. Self-starter, ability to work independently to meet specified deadlines. PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT: 1. Must submit to and pass a drug test pursuant to Company Drug-Free Workplace Policy which includes random testing. 2. Must have good vision. (may be corrected) 3. Must have no known hearing loss. (may be corrected) 4. Must be able to stand/walk/sit for prolonged periods of time. 5. Must be able to travel. 6. Must have stamina to work more than the scheduled workday when needed, including nights and weekends. 7. Must be physically present at work during business hours. TRAINING: 1. Safety Orientation 2. HAZCOM/Right to Know 3. Annual Drug and Alcohol Awareness 4. Annual Ethics Refresher This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job- related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities required. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.

Dedication. Precision. Care. Join The Team That Lives It Every Day. Nammo Energetics (NEI) is the division of Nammo Group responsible for the establishment of a solid rocket motor manufacturing facility located in Perry, Florida adjacent to the existing Nammo Perry Inc facility. NEI will oversee the design, construction, qualification, and personnel staffing for the facility which targets initial production in 2027. The Design Engineer will assist in maintaining and troubleshooting issues with our automated and semi-automated equipment. This person will make improvements to equipment to insure we efficiently meet our production, quality, and safety requirements. This position is on-site at the Nammo Energetics Office in Downtown, Perry, Florida and requires some travel to Raufoss, Norway within the first 12-18 months. Unique Benefits Designed with Care: Monday - Thursday work week working 10-hour days Relocation assistance provided 401(K) with a 6% company match 100% Employer-Paid Employee Only Medical Plan Option Employer Health Saving Account Contributions starting at two week's vacation, one-week sick pay, and nine paid holidays What You'll Do: Precision in Action Plan and execute special projects, including design and fabrication of production equipment (automated and semi-automated assembly and secondary machines, etc.), material selection and tooling requirements Evaluate existing mechanical, electromechanical, hydraulic and pneumatic systems for improved yield and throughput. Develop mechanical/electromechanical fixtures and machines adhering to customer requirements. Collaborate with Quality and Process Engineers, and other departments to obtain necessary requirements for writing detailed scopes for the procurement of new equipment. Assures system and product quality by confirming fabrication, assembly, and installation processes. Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special services. Estimate tooling cost from design through fabrication. Coordinate with machine vendor through concept, design, fabrication, runoff and setup of equipment. Maintain adherence to Company policies and procedures, safety and environmental standards, and good housekeeping practices Assist maintenance with troubleshooting and repairing production equipment. Other duties as assigned What Dedicated Teammates Bring Bachelor's Degree in Engineering and 5 years work experience or 15 years work experience in equivalent position. Advanced 3D Design capability Designing and maintaining automated assembly machines Knowledge of hydraulics systems, drawings, hydraulic schematics Knowledge of pneumatics systems, drawings, and schematics Ability to interpret all types of mechanical, electrical and pneumatic drawings Ability to follow projects through to completion Ability to follow and understand basic PLC code Strong communication skills, both oral and written Excellent organizational and computer skills Proficient in Microsoft Office, especially Excel, Word, Project, and Outlook. Good interpersonal skills Self-starter, ability to work independently to meet specified deadlines Our Woking Conditions and Requirements Must submit to and pass a drug test pursuant to Company Drug-Free Workplace Policy Must have good vision (may be corrected) Must be able to communicate written and verbally Must be able to travel. Must be able to stand, walk, and sit for prolonged periods of time, and be able to lift up to 20 lbs. with or without reasonable accommodation. Must be willing and able to work outside of the standard work schedule, including nights and weekends

We are seeking a candidate for a key role in scheduling for a portfolio of Data Center projects of high strategic importance to Meta. The Schedule Lead will act as a technical Schedule subject matter expert, overseeing all schedule management and reporting for their portfolio of projects. You will focus on speed to market and be a critical partner for the Delivery Team and the Project Controls Lead to forecast and help mitigate schedule-related risks and issues on the project, enable commercial accountability, manage schedule health reporting/escalation, and ensure that schedule change management is effective and expedient. This position will work closely with the DEC (Design, Engineering, and Construction) Technical Operations team and various internal departments, including Site Project Management teams, Pre-Construction, Contracts, Finance, Accounting, Sourcing, and Operations Engineering. **Required Skills:** Area Schedule Lead - Data Center Design, Engineering and Construction Responsibilities: 1. Responsible for End to End schedule coordination and updates, including interface with risk management and pro-active communication of updates and alignment of variance root cause/commentary with cross- functional partners 2. Identifies, documents, and communicates schedule risks through defined processes, including Risk Registers, health reviews, and New Build Program management meetings 3. Accountable for all aspects of vendor and Contractor schedule management 4. Accountable for Contractor baseline schedule development and evaluation during pre-construction, including ensuring adherence to program guidance and specifications. Will lead efforts to optimize schedules for speed to market and successful on-time-delivery 5. Responsible for application of commercial entitlement for contractor Extensions Of Time (EOT) for their designated portfolio of projects. Provide leadership to site teams for Delay Tracking, EOT requests and claims. Responsible for making recommendations that are in line with contract and escalating when site decisions differ from the contractual or program guidance 6. Lead the identification and application of Proactive Risk Indicators in sub-area and ensure all risks are properly escalated to Area Heath Reviews and other appropriate forums. Lead ad-hoc schedule analysis to support program as required 7. Lead a small team of consultants (if required) to support effective schedule management for the designated portfolio of projects 8. Approximately 50% travel to other Data Center sites within the Area and home office **Minimum Qualifications:** Minimum Qualifications: 9. 10+ years of Planning, Scheduling, Construction Management, or Related field experience 10. Bachelor's degree in Engineering, Construction Management, or Equivalent Technical Field or related field experience 11. Subject Matter Expertise in Primavera P6 and other scheduling related methodologies and software 12. Experience developing/managing an Owner's planning/scheduling program 13. Experience within Data Center, Infrastructure or Construction programs requiring complicated commissioning specifications 14. Demonstrated analytical, communication, problem solving, prioritization, organization and reporting skills 15. Experience leading complex project or program planning and coordination amongst a large group of internal and external project stakeholders 16. Demonstrated experience developing and driving actions or operational adjustments based on schedule or project controls performance metrics 17. Demonstrated experience partnering with cross-functional teams to influence strategic direction **Preferred Qualifications:** Preferred Qualifications: 18. Experience identifying schedule efficiencies and driving programmatic or organizational alignment in changing execution strategies to optimize schedule performance 19. Experience negotiating schedule changes or complex construction claims 20. Successful development and implementation of scheduling or project controls strategies in a large organization 21. Familiar with complex networking systems and electrical infrastructure 22. Experience managing a team of Contingent Worker Schedulers **Public Compensation:** $122,000/year to $169,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Check-Mate Manufacturing LLC located in Thomasville, GA. Over the past 40 years, Check-Mate has proven to be the winning move for hundreds of customers in a diverse range of industries including aerospace, automotive, firearms, cosmetics, and medical industries. The unsurpassed customer service of the company has long been recognized as an innovator and leader in tool & die, stampings and assemblies. Whether producing high-precision tools and progressive dies, stamping, or assemblies for everything from healthcare to personal security products, Check-Mate out-thinks , out-maneuvers , and out -performs its competition. MANUFACTURING ENGINEER (With Strong Metals background) ***UNITED STATES CITIZEN OR GREEN CARD HOLDER ONLY*** ***(NO SPONSORSHIPS AVAILABLE)*** SUMMARY OF POSITION: Manufacturing Engineer responsibilities include development and implementation of best practices and new processes, identifying and driving process improvements, ownership of new product launches, serving as a technical expert for the company and customers, leadership and mentoring of less experienced peers, and new equipment and process specification and design. The candidate for this position must have demonstrated the application of best practices and lessons learned, complex mechatronics design / quoting / implementation experience, process development, value stream mapping and improvement, and creativity to develop World Class Processes with our Operations, Tool & Die, QA, HR, and Facilities teams. ESSENTIAL FUNCTIONS Includes, but may not be limited to the following: Manufacturing Engineer utilizes complex data analysis techniques to identify and correct process variances. Manufacturing Engineer represents the Check-Mate Engineering organization. Shows self to be a technical leader on projects to internal and external customers. Manufacturing Engineer leads and manages teams during product and process development. Manufacturing Engineer provides operations and supplier support domestically and internationally. Manufacturing Engineer leads and participates in design reviews, owning and resolving action items. Manufacturing Engineer interacts with senior external personnel (customers / suppliers) on significant technical matters requiring coordination within and between organizations. Manufacturing Engineer must have thorough understanding of ERP systems including process specific data collection, validation, and presentation. Key expectations for this position include high level problem solving, along with technical leadership in the development of new processes. Senior manufacturing engineers will be required to make sound technical decisions, provide mentoring and leadership to junior engineers, and manage expenses and requirements of assigned tasks. This position will require effective communications with other engineers, tooling designers, maintenance, operators, engineers from other disciplines, along with line and program management and Customers, and our Executive Team. Minimum Requirements: B.S. degree in Systems, Industrial, or Mechanical Engineering or equivalent manufacturing education and experience 7+ years' experience in technical process support of manufacturing operations High Level project management, value stream metric analysis, process control 5+ years Solving complex technical problems that require the regular use of ingenuity and creativity 5+ years' Mechanical design, analysis, and documentation of tooling and processes Experience with Metal Stamping, Fabrication, Assembly and Tooling Must be able to communicate efficiently and effectively (verbal, written, and electronic) to all levels of the organization A3 Communication or other CER / Project justification methods Completely qualified with MS Office, ERP systems, 3D modeling (SolidWorks, Inventor, or Creo). CNC machine operation and / or setup a plus. Proven project leadership / planning / communication - must give specific examples Problem solving skills and familiarity with multiple methods are a must - Shainin / L6S / 5-Why / PDCA Attention to detail and time management, deadline driven Must be able to thrive in a team setting with cross functional teams Must be able to handle multiple projects and maintain deadlines for same EOE/AA/M/F/VET/D

Job Title: Project Engineer- Tyndall AFB ***Work Location: Panama City, FL*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for observation and reporting on assigned projects to government personnel. Oversees construction, contract administration, and quality assurance activities in accordance with established policies, procedures, and regulations. Analyzes design and construction issues with respect to contract requirements. Delivers recommendations regarding compliance to contract provisions and exercises engineering judgment to assist in the development of solutions between conflicting plan details or requirements which become evident as construction progresses. Make technical interpretations of drawings and specifications; provide engineering determinations on meeting the contract requirements. Review submittals, respond to contractor questions, RFIs, construction deficiencies, project issues, requests for equitable adjustment, and claims. Assist in preparing documents for change orders and claims. Reviews schedule items and pay applications to ensure balance with percentages for each corresponding work feature or component of work. Reviews contractor's submittals including QA and Safety Plans. Provides field surveillance and delivers daily detailed reports. Reviews drawings and specifications. Assists in preparation of scope of work modifications and cost estimates. Provides safety oversight. Utilize Resident Management System (RMS). Education/Experience: Bachelor's Degree in related field 10 years of experience on large complex multimillion dollar federal construction projects, preferably Department of Defense Facilities experience with administrative buildings, airfield facilities and apron, barracks, water and electrical systems, and roadways. Experience with Three-Phase QC/Inspection process Experience preferred EM 385-1-1 USACE Safety Manual Experience with Resident Management System (RMS) Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are looking for a Manufacturing Engineer to join our team. In this role, the Manufacturing Engineer will play a key role in developing, implementing, and optimizing manufacturing processes to ensure the production of high-quality aerospace components. This position requires a strong understanding of precision machining, aerospace industry standards, and continuous improvement methodologies. Responsibilities: Design, implement, and improve manufacturing processes to meet production goals, quality standards, and cost targets. Create and optimize CNC programs for milling, turning and other machining operations. Develop tooling and fixture designs to enhance machining efficiency and precision. Provide hands-on support to machinist and operators for troubleshooting and resolving production issues. Collaborate with other MFG Engineers to ensure manufacturability and adherence to specifications. Conduct root cause analysis and implement corrective actions for quality or process-related issues. Identify opportunities for process improvement and lead initiatives to enhance productivity and reduce waste. Utilize lean manufacturing and Kaizen methodologies to drive efficiency and process control. Prepare and maintain detailed manufacturing work instructions, routings, and process documentation. Ensure compliance with aerospace industry standards, including AS9100 and NADCAP. Participate in audits and ensure adherence to safety, quality, and regulatory requirements. Manage manufacturing projects from concept to completion, ensuring timelines and budgets are met. Coordinate with cross-functional teams, including production, quality, and procurement, to achieve project goals. Evaluate and recommend new tooling, equipment, and technologies to improve machining capabilities. Required Qualifications: Bachelor's degree in manufacturing engineering or related engineering degree 2+ years of experience in a manufacturing or aerospace machining environment Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Proficiency in CNC machining, programming, and set up. Knowledge of GD&T and aerospace standards. Strong problem solving and analytical skills. Proficiency in CAD/CAM software- preferably Siemens NX Familiarity with ERP/MRP systems Excellent communication skills and project management skills. Physical Requirements: While performing the duties of this Job, the employee is regularly required to sit and use hands to finger, handle, or feel. The employee is frequently required to talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision and color vision. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

JOB SUMMARY: The Design Engineer will assist in maintaining and troubleshooting issues with our automated and semi-automated equipment. Make improvements to equipment to insure we efficiently meet our production, quality, and safety requirements. ESSENTIAL JOB FUNCTIONS: 1. Plan and coordinate special projects, including design and fabrication of production equipment (automated and semi-automated assembly and secondary machines, etc.), material selection and tooling requirements. 2. Evaluate existing mechanical, electromechanical, hydraulic, and pneumatic systems for improved yield and throughput. 3. Develop mechanical/electromechanical fixtures and machines by studying customer requirements. 4. Collaborate with Quality and Process Engineers, and other departments to obtain necessary requirements for writing detailed scopes for the procurement of new equipment. 5. Assures system and product quality by confirming fabrication, assembly, and installation processes. 6. Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special services. 7. Estimate tooling cost from design through fabrication. 8. Coordinate with machine vendor through concept, design, fabrication, runoff, and setup of equipment. 9. Maintain adherence to Company policies and procedures, safety and environmental standards, and good housekeeping practices. 10. Assist maintenance with troubleshooting and repairing production equipment. 11. Other duties as assigned. KNOWLEDGE AND SKILLS: 1. Bachelor's Degree or equivalent combination of experience and work preferable but not required. 2. Advanced 3D Design capability preferably Autodesk Inventor 2024 with a minimum of 8 years' experience. 3. Designing and maintaining automated assembly machines with a minimum of 5 years' experience. (Swanson, Bodine, or similar carousel type assembly machines) 4. Knowledge of hydraulics systems. 5. Knowledge of pneumatics systems. 6. Ability to interpret all types of mechanical, electrical, and pneumatic drawings. 7. Ability to follow projects through to completion. 8. Ability to follow PLC code. 9. Strong communication skills, both oral and written. 10. Excellent organizational and computer skills. 11. Good interpersonal skills. 12. Self-starter, ability to work independently to meet specified deadlines. PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT: 1. Must submit to and pass a drug test pursuant to Company Drug-Free Workplace Policy which includes random testing. 2. Must have good vision. (may be corrected) 3. Must have no known hearing loss. (may be corrected) 4. Must be able to stand/walk/sit for prolonged periods of time. 5. Must be able to travel. 6. Must have stamina to work more than the scheduled workday when needed, including nights and weekends. 7. Must be physically present at work during business hours. TRAINING: 1. Safety Orientation 2. HAZCOM/Right to Know 3. Annual Drug and Alcohol Awareness 4. Annual Ethics Refresher This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job- related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills or abilities required. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Dedication. Precision. Care. Join The Team That Lives It Every Day. Nammo Energetics (NEI) is the division of Nammo Group responsible for the establishment of a solid rocket motor manufacturing facility located in Perry, Florida adjacent to the existing Nammo Perry Inc facility. NEI will oversee the design, construction, qualification, and personnel staffing for the facility which targets initial production in 2027. The Design Engineer will assist in maintaining and troubleshooting issues with our automated and semi-automated equipment. This person will make improvements to equipment to insure we efficiently meet our production, quality, and safety requirements. This position is on-site at the Nammo Energetics Office in Downtown, Perry, Florida and requires some travel to Raufoss, Norway within the first 12-18 months. Unique Benefits Designed with Care: * Monday - Thursday work week working 10-hour days * Relocation assistance provided * 401(K) with a 6% company match * 100% Employer-Paid Employee Only Medical Plan Option * Employer Health Saving Account Contributions * starting at two week's vacation, one-week sick pay, and nine paid holidays What You'll Do: Precision in Action * Plan and execute special projects, including design and fabrication of production equipment (automated and semi-automated assembly and secondary machines, etc.), material selection and tooling requirements * Evaluate existing mechanical, electromechanical, hydraulic and pneumatic systems for improved yield and throughput. * Develop mechanical/electromechanical fixtures and machines adhering to customer requirements. * Collaborate with Quality and Process Engineers, and other departments to obtain necessary requirements for writing detailed scopes for the procurement of new equipment. * Assures system and product quality by confirming fabrication, assembly, and installation processes. * Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special services. * Estimate tooling cost from design through fabrication. * Coordinate with machine vendor through concept, design, fabrication, runoff and setup of equipment. * Maintain adherence to Company policies and procedures, safety and environmental standards, and good housekeeping practices * Assist maintenance with troubleshooting and repairing production equipment. * Other duties as assigned What Dedicated Teammates Bring * Bachelor's Degree in Engineering and 5 years work experience or 15 years work experience in equivalent position. * Advanced 3D Design capability * Designing and maintaining automated assembly machines * Knowledge of hydraulics systems, drawings, hydraulic schematics * Knowledge of pneumatics systems, drawings, and schematics * Ability to interpret all types of mechanical, electrical and pneumatic drawings * Ability to follow projects through to completion * Ability to follow and understand basic PLC code * Strong communication skills, both oral and written * Excellent organizational and computer skills * Proficient in Microsoft Office, especially Excel, Word, Project, and Outlook. * Good interpersonal skills * Self-starter, ability to work independently to meet specified deadlines Our Woking Conditions and Requirements * Must submit to and pass a drug test pursuant to Company Drug-Free Workplace Policy * Must have good vision (may be corrected) * Must be able to communicate written and verbally * Must be able to travel. * Must be able to stand, walk, and sit for prolonged periods of time, and be able to lift up to 20 lbs. with or without reasonable accommodation. * Must be willing and able to work outside of the standard work schedule, including nights and weekends

We are seeking a candidate for a key role overseeing our Contingent Workforce of Project Schedulers. Leadership, communication, and organization skills are important in this highly collaborative, analytical, and strategic role. This position will work closely within the DEC (Design, Engineering and Construction) Business Controls team and various internal departments including Site Project Management teams, Pre-Construction, Contracts, Finance, Accounting, Sourcing and Operations Engineering. **Required Skills:** Area Schedule Lead - Data Center Design, Engineering and Construction Responsibilities: 1. Oversee Contingent Worker schedulers on our dual sites. Review the schedule health reports produced by CW schedulers on site and provide feedback to CW account leads as required 2. Responsible for application of commercial entitlement for schedule. Provide leadership to site teams and CW Schedulers for Delay Tracking, Extension of Time (EOT) requests and claims and coordinate the change evaluation in collaboration with the cost team. Responsible for making recommendations that are in line with contract and escalating when site decisions differ from the contractual or program guidance 3. Support Precon team in ensuring that the GC/TC establishes a baseline that is aligned with precon estimates, and one that can be used as a true target schedule as the job progresses. Ensure all Baseline Expectations are meet and escalate appropriately if Schedule does not meet the revised checklist or DIV1 Spec 4. Accountable for maintaining Integrated Master Schedule (IMS) including reporting to site team, leadership and cross-functional partners 5. Lead the identification and application of Proactive Risk Indicators (Project Kronos) on site and ensure all risks are properly escalated on AHRs and other leadership functions. Collaborate with site teams on schedule mitigation strategies. Track implementation of GC/TC Quality Checklist and End of month Communications 6. Work through any XFN schedule coordination challenges with ISCE, IDC and other partners. Ensure Alignment on each site between Scheduling Team and Cost team at the project level **Minimum Qualifications:** Minimum Qualifications: 7. 10+ years of construction schedule experience 8. Experience with P6 (Primavera 6) and Excel 9. BA/BS in construction management, finance, business or equivalent **Preferred Qualifications:** Preferred Qualifications: 10. 5+ years data center experience **Public Compensation:** $122,000/year to $169,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Check-Mate Manufacturing LLC located in Thomasville, GA. Over the past 40 years, Check-Mate has proven to be the winning move for hundreds of customers in a diverse range of industries including aerospace, automotive, firearms, cosmetics, and medical industries. The unsurpassed customer service of the company has long been recognized as an innovator and leader in tool & die, stampings and assemblies. Whether producing high-precision tools and progressive dies, stamping, or assemblies for everything from healthcare to personal security products, Check-Mate out-thinks , out-maneuvers , and out -performs its competition. MANUFACTURING ENGINEER (With Strong Metals Background) ***UNITED STATES CITIZEN OR GREEN CARD HOLDER ONLY*** ***(NO SPONSORSHIPS AVAILABLE)*** SUMMARY OF POSITION: Manufacturing Engineer responsibilities include development and implementation of best practices and new processes, identifying and driving process improvements, ownership of new product launches, serving as a technical expert for the company and customers, leadership and mentoring of less experienced peers, and new equipment and process specification and design. The candidate for this position must have demonstrated the application of best practices and lessons learned, complex mechatronics design / quoting / implementation experience, process development, value stream mapping and improvement, and creativity to develop World Class Processes with our Operations, Tool & Die, QA, HR, and Facilities teams. ESSENTIAL FUNCTIONS Includes, but may not be limited to the following: Manufacturing Engineer utilizes complex data analysis techniques to identify and correct process variances. Manufacturing Engineer represents the Check-Mate Engineering organization. Shows self to be a technical leader on projects to internal and external customers. Manufacturing Engineer leads and manages teams during product and process development. Manufacturing Engineer provides operations and supplier support domestically and internationally. Manufacturing Engineer leads and participates in design reviews, owning and resolving action items. Manufacturing Engineer interacts with senior external personnel (customers / suppliers) on significant technical matters requiring coordination within and between organizations. Manufacturing Engineer must have thorough understanding of ERP systems including process specific data collection, validation, and presentation. Key expectations for this position include high level problem solving, along with technical leadership in the development of new processes. Senior manufacturing engineers will be required to make sound technical decisions, provide mentoring and leadership to junior engineers, and manage expenses and requirements of assigned tasks. This position will require effective communications with other engineers, tooling designers, maintenance, operators, engineers from other disciplines, along with line and program management and Customers, and our Executive Team. Minimum Requirements: B.S. degree in Systems, Industrial, or Mechanical Engineering or equivalent manufacturing education and experience 7+ years' experience in technical process support of manufacturing operations High Level project management, value stream metric analysis, process control 5+ years Solving complex technical problems that require the regular use of ingenuity and creativity 5+ years' Mechanical design, analysis, and documentation of tooling and processes Experience with Metal Stamping, Fabrication, Assembly and Tooling Must be able to communicate efficiently and effectively (verbal, written, and electronic) to all levels of the organization A3 Communication or other CER / Project justification methods Completely qualified with MS Office, ERP systems, 3D modeling (SolidWorks, Inventor, or Creo). CNC machine operation and / or setup a plus. Proven project leadership / planning / communication - must give specific examples Problem solving skills and familiarity with multiple methods are a must - Shainin / L6S / 5-Why / PDCA Attention to detail and time management, deadline driven Must be able to thrive in a team setting with cross functional teams Must be able to handle multiple projects and maintain deadlines for same EOE/AA/M/F/VET/D

Job Description Dedication. Precision. Care. Join The Team That Lives It Every Day. Nammo Energetics (NEI) is the division of Nammo Group responsible for the establishment of a solid rocket motor manufacturing facility located in Perry, Florida adjacent to the existing Nammo Perry Inc facility. NEI will oversee the design, construction, qualification, and personnel staffing for the facility which targets initial production in 2027. The Design Engineer will assist in maintaining and troubleshooting issues with our automated and semi-automated equipment. This person will make improvements to equipment to insure we efficiently meet our production, quality, and safety requirements. This position is on-site at the Nammo Energetics Office in Downtown, Perry, Florida and requires some travel to Raufoss, Norway within the first 12-18 months. Unique Benefits Designed with Care: Monday - Thursday work week working 10-hour days Relocation assistance provided 401(K) with a 6% company match 100% Employer-Paid Employee Only Medical Plan Option Employer Health Saving Account Contributions starting at two week's vacation, one-week sick pay, and nine paid holidays What You'll Do: Precision in Action Plan and execute special projects, including design and fabrication of production equipment (automated and semi-automated assembly and secondary machines, etc.), material selection and tooling requirements Evaluate existing mechanical, electromechanical, hydraulic and pneumatic systems for improved yield and throughput. Develop mechanical/electromechanical fixtures and machines adhering to customer requirements. Collaborate with Quality and Process Engineers, and other departments to obtain necessary requirements for writing detailed scopes for the procurement of new equipment. Assures system and product quality by confirming fabrication, assembly, and installation processes. Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special services. Estimate tooling cost from design through fabrication. Coordinate with machine vendor through concept, design, fabrication, runoff and setup of equipment. Maintain adherence to Company policies and procedures, safety and environmental standards, and good housekeeping practices Assist maintenance with troubleshooting and repairing production equipment. Other duties as assigned What Dedicated Teammates Bring Bachelor's Degree in Engineering and 5 years work experience or 15 years work experience in equivalent position. Advanced 3D Design capability Designing and maintaining automated assembly machines Knowledge of hydraulics systems, drawings, hydraulic schematics Knowledge of pneumatics systems, drawings, and schematics Ability to interpret all types of mechanical, electrical and pneumatic drawings Ability to follow projects through to completion Ability to follow and understand basic PLC code Strong communication skills, both oral and written Excellent organizational and computer skills Proficient in Microsoft Office, especially Excel, Word, Project, and Outlook. Good interpersonal skills Self-starter, ability to work independently to meet specified deadlines Our Woking Conditions and Requirements Must submit to and pass a drug test pursuant to Company Drug-Free Workplace Policy Must have good vision (may be corrected) Must be able to communicate written and verbally Must be able to travel. Must be able to stand, walk, and sit for prolonged periods of time, and be able to lift up to 20 lbs. with or without reasonable accommodation. Must be willing and able to work outside of the standard work schedule, including nights and weekends